Ray, Check your CONFIG: PTT -- KEY menu entry and set it to OFF -- OFF then use VOX when using Data modes. Yes it is likely that the computer and/or MicroHam is setting either DRT or RTS (or both) on.
73, Don W3FPR On 3/7/2012 8:23 AM, Ray G3XLG wrote: > However whilst MVARI in N1MM decodes PSK31 signals fine, when i try to > transmit I get no power output& instead I get a couple of error messages on > the K3 - Error PTT , Error KEY which in the K3 manual saysits usually caused > by an external device (the MicroHAM MKII?) shorting KEY or PTT to ground. > I've obviously got something setup wrong in either N1MM config or in the > MKII router. Any ideas please? > Ray, G3XLG > > > ----- > Ray G3XLG > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
