gmsh  

Messages by Thread

• • Re: [Gmsh] Gmsh 2.8.3 shut down after 1sec. Mikhail Artemyev
  • Re: [Gmsh] Gmsh 2.8.3 shut down after 1sec. Norbert Guérard
  • Re: [Gmsh] Gmsh 2.8.3 shut down after 1sec. Mikhail Artemyev
  • [Gmsh] [SOLVED] Re: Gmsh 2.8.3 shut down after 1sec. Norbert Guérard
• [Gmsh] GetEnv("PWD") segfaults Torquil Macdonald Sørensen
• [Gmsh] gmsh 2.8.4 compilation errors under Visual Studio 10 Subhasis Sarkar
• [Gmsh] Disconnected interface between prismatic and tetrahedral elements Brian Vermeire
• [Gmsh] How to set global random number seed in Gmsh? David Bernstein
  • Re: [Gmsh] How to set global random number seed in Gmsh? Jean-François Remacle
• [Gmsh] Gmsh 2.8.4 compilation error in Visual Studio 2010 Subhasis Sarkar
• Re: [Gmsh] Failure with Second order element Jean-François Remacle
• [Gmsh] line in surface issue Kunz, Herbert
• [Gmsh] Change coordinate of a vertex in a GModel using API Agnese, Marco
  • Re: [Gmsh] Change coordinate of a vertex in a GModel using API Mikhail Artemyev
  • Re: [Gmsh] Change coordinate of a vertex in a GModel using API Agnese, Marco
  • Re: [Gmsh] Change coordinate of a vertex in a GModel using API Mikhail Artemyev
  • Re: [Gmsh] Change coordinate of a vertex in a GModel using API Agnese, Marco
  • Re: [Gmsh] Change coordinate of a vertex in a GModel using API Mikhail Artemyev
• Re: [Gmsh] 3D MESH DONE.... WITHOUT 3D ELEMENTS Zenker, Dr. Matthias
  • Re: [Gmsh] 3D MESH DONE.... WITHOUT 3D ELEMENTS Zenker, Dr. Matthias
• [Gmsh] WG: 3D MESH DONE.... WITHOUT 3D ELEMENTS Zenker, Dr. Matthias
• [Gmsh] Interpolation Scheme for High Order Elements John Pease Moore
• [Gmsh] recombine using gmsh library Mikhail Artemyev
  • Re: [Gmsh] recombine using gmsh library Mikhail Artemyev
• [Gmsh] RE Control 1D meshing for 2D models jean pierre aubry
• [Gmsh] Control 1D meshing for 2D models Gabriel Santiago
• [Gmsh] Question about Quads when using Recombine David Tilston
• [Gmsh] How do I specify a physical group of dimension 1 for the Crack plugin? Geoff Oxberry
  • Re: [Gmsh] How do I specify a physical group of dimension 1 for the Crack plugin? Geoff Oxberry
• [Gmsh] Tensor component order corra85
• [Gmsh] Meshing issue in gmsh smenon
  • Re: [Gmsh] Meshing issue in gmsh Christophe Geuzaine
• [Gmsh] curious results Philippe
• [Gmsh] Does gmsh require any PETSc external packages? Geoff Oxberry
• [Gmsh] RE RE Creation of Physical Line with for loop Pietro Vitali
  • Re: [Gmsh] RE RE Creation of Physical Line with for loop jean pierre aubry
  • Re: [Gmsh] RE RE Creation of Physical Line with for loop Pietro Vitali
• [Gmsh] REMeshing a surface with an hole jean pierre aubry
  • Re: [Gmsh] REMeshing a surface with an hole jean pierre aubry
• [Gmsh] RE Creation of Physical Line with for loop jean pierre aubry
• [Gmsh] Creation of Physical Line with for loop Pietro Vitali
• [Gmsh] getMaxVertexNumber vs getNumMeshVertices Agnese, Marco
• [Gmsh] Help to build gmsh without GUI Safariforoshani, Mohammadreza
• [Gmsh] several meshes in one .med-file, ist this possible Johannes Ackva
  • Re: [Gmsh] several meshes in one .med-file, ist this possible Christophe Geuzaine
• [Gmsh] Any way to redefine GMSH_BIN, GMSH_LIB, GMSH_DOC, & GMSH_MAN when invoking CMake? Geoff Oxberry
  • Re: [Gmsh] Any way to redefine GMSH_BIN, GMSH_LIB, GMSH_DOC, & GMSH_MAN when invoking CMake? Christophe Geuzaine
• [Gmsh] Get coordinate of a point from STEP geometry Joel Cugnoni
• [Gmsh] Gmsh 2.8.x unable to open notepad.exe 杨军
  • Re: [Gmsh] Gmsh 2.8.x unable to open notepad.exe Mikhail Artemyev
• [Gmsh] BackgroundImageFileName can't be set again in model option file Johan van Ravenhorst
  • Re: [Gmsh] BackgroundImageFileName can't be set again in model option file Christophe Geuzaine
• [Gmsh] Gmsh as library - merge stl Simone GREMMO [531257]
• [Gmsh] High-order optimization parameters FERRERO ANDREA
  • Re: [Gmsh] High-order optimization parameters Gonçalo Albuquerque
  • Re: [Gmsh] High-order optimization parameters FERRERO ANDREA
  • Re: [Gmsh] High-order optimization parameters Gonçalo Albuquerque
  • Re: [Gmsh] High-order optimization parameters FERRERO ANDREA
• [Gmsh] mesh a cylinder with hole jean pierre aubry
• [Gmsh] mesh a cylinder with hole Alberto Griseri
  • Re: [Gmsh] mesh a cylinder with hole Mikhail Artemyev
  • Re: [Gmsh] mesh a cylinder with hole Mikhail Artemyev
  • Re: [Gmsh] mesh a cylinder with hole jean pierre aubry
• [Gmsh] some problems about gmsh r_shuilin
• [Gmsh] Gmsh mesh to fluent Marcus Miranda
• [Gmsh] Hexahedra Mesh Capabilities John Moore
  • Re: [Gmsh] Hexahedra Mesh Capabilities John Moore
  • Re: [Gmsh] Hexahedra Mesh Capabilities Jean-François Remacle
• [Gmsh] RE Merging with same indicator - Merging the nodes jean pierre aubry
• [Gmsh] How to install by code::block+mingw Finite Tsai
• [Gmsh] RE Segfault during meshing jean pierre aubry
  • Re: [Gmsh] RE Segfault during meshing Christophe Geuzaine
• [Gmsh] Isoline labels for postprocessing Martin Vymazal
  • Re: [Gmsh] Isoline labels for postprocessing Martin Vymazal
• [Gmsh] Gmsh continually saving .geo files? D Haley
• [Gmsh] Segfault during meshing D Haley
• [Gmsh] Hybrid Mesh Error: cannot tetrahedralize volume with quadrangle on boundary Rajib Roy
• [Gmsh] Read .msh in binary format with Fortran Matteo Parsani
• [Gmsh] gmshpy -> AutoCoherence of the GModel Paul TAFOREL
• [Gmsh] Gmsh and GetDP on your phone and tablet with Onelab/Mobile Christophe Geuzaine
• [Gmsh] Need help Reda Abdelazim
  • Re: [Gmsh] Need help Ruth Vazquez Sabariego
  • [Gmsh] Need Help __Hassan_ _
• [Gmsh] Extrude 2D quadrilateral mesh and get hexahedrals Matteo Parsani
  • Re: [Gmsh] Extrude 2D quadrilateral mesh and get hexahedrals Matteo Parsani
  • Re: [Gmsh] Extrude 2D quadrilateral mesh and get hexahedrals Christophe Geuzaine
• [Gmsh] Transfinite surface is not working Reji Rejish
• Re: [Gmsh] [patch] New output file format (.pgf) for publication grade figues (LaTeX) Christophe Geuzaine
  • Re: [Gmsh] [patch] New output file format (.pgf) for publication grade figues (LaTeX) Sebastian Eiser
• [Gmsh] Question about higher order elements nick . g . chisholm
  • Re: [Gmsh] Question about higher order elements nick . g . chisholm
• [Gmsh] Gmsh & java ? TOUAI RAHIM
  • Re: [Gmsh] Gmsh & java ? benjamin JEANTY-RUARD
• [Gmsh] Demande d'aide Mohamed Anis
• [Gmsh] Points from extruded lines Cade Perkins
  • Re: [Gmsh] Points from extruded lines Cade Perkins
• Re: [Gmsh] #231: a cube meshed in 5x5x5 produce 137 vertices instead of 125 Denis Davydov
• [Gmsh] unit in gmsh 王学敏
  • Re: [Gmsh] unit in gmsh Geordie McBain
• [Gmsh] Behaviour of GUI "Step forward" Lachlan Robert Mason
  • Re: [Gmsh] Behaviour of GUI "Step forward" Christophe Geuzaine
• [Gmsh] Create a structured-unstructured mesh using the API Alexander Tismer
• [Gmsh] mesh inside the volume and on the curvature is not good Lianjun Wu
• Re: [Gmsh] problem when saving in unroll format surface which, contains a hole boundary Mikhail Artemyev
  • Re: [Gmsh] problem when saving in unroll format surface which, contains a hole boundary benjamin JEANTY-RUARD
  • Re: [Gmsh] problem when saving in unroll format surface which, contains a hole boundary Mikhail Artemyev
  • Re: [Gmsh] problem when saving in unroll format surface which, contains a hole boundary benjamin JEANTY-RUARD
• [Gmsh] Structured mesh, fixe the mesh size at the end of a line Gaspard Fourestier
• [Gmsh] problem when saving in unroll format surface which contains a hole boundary benjamin JEANTY-RUARD
• [Gmsh] Bad support of Medit mesh format Wei-Dong Lian
  • Re: [Gmsh] Bad support of Medit mesh format Christophe Geuzaine
• [Gmsh] FW: verify msh file ashraf rateb
• [Gmsh] level the elements Mauricio Vinassa
  • Re: [Gmsh] level the elements Geordie McBain
  • Re: [Gmsh] level the elements jeremy theler
• [Gmsh] lines (faces) counter for 2D mesh Vladimír HRIC
• [Gmsh] extrude .msh file Steffen Becker
• [Gmsh] 3D Optimization - Curl plugin Mandija, S.
  • Re: [Gmsh] 3D Optimization - Curl plugin Christophe Geuzaine
• [Gmsh] how to test the quality of mesh in gmsh Lianjun Wu
  • Re: [Gmsh] how to test the quality of mesh in gmsh Valentin Biasi
• [Gmsh] how to define mesh size on the surface and in the volume 王学敏
  • Re: [Gmsh] how to define mesh size on the surface and in the volume Jean-François Remacle
• Re: [Gmsh] physical surface in gmsh Geordie McBain
  • Re: [Gmsh] physical surface in gmsh 王学敏
• Re: [Gmsh] Merging VTK or STL surfaces: unknow surfaces and missing boundaries Vincent Libertiaux
• Re: [Gmsh] physical surface and mesh inside Zenker, Dr. Matthias
• [Gmsh] Extraction connectivité arête-noeud Vincent FONTAINE
  • Re: [Gmsh] Extraction connectivité arête-noeud Geordie McBain
• [Gmsh] spline implementation Marek Wojciechowski
  • Re: [Gmsh] spline implementation Marek Wojciechowski
• [Gmsh] Error : Self intersecting surface mesh, computing intersections (this could take a while) Steffen Becker
  • Re: [Gmsh] Error : Self intersecting surface mesh, computing intersections (this could take a while) Roman Fratczak
  • Re: [Gmsh] Error : Self intersecting surface mesh, computing intersections (this could take a while) Steffen Becker
  • Re: [Gmsh] Error : Self intersecting surface mesh, computing intersections (this could take a while) Roman Fratczak
  • Re: [Gmsh] Error : Self intersecting surface mesh, computing intersections (this could take a while) Roman Fratczak
  • Re: [Gmsh] Error : Self intersecting surface mesh, computing intersections (this could take a while) Steffen Becker
  • Re: [Gmsh] Error : Self intersecting surface mesh, computing intersections (this could take a while) Roman Fratczak
  • Re: [Gmsh] Error : Self intersecting surface mesh, computing intersections (this could take a while) Zenker, Dr. Matthias
  • Re: [Gmsh] Error : Self intersecting surface mesh, computing intersections (this could take a while) Steffen Becker
  • Re: [Gmsh] Error : Self intersecting surface mesh, computing intersections (this could take a while) Zenker, Dr. Matthias
  • Re: [Gmsh] Error : Self intersecting surface mesh, computing intersections (this could take a while) Roman Fratczak
  • Re: [Gmsh] Error : Self intersecting surface mesh, computing intersections (this could take a while) Roman Fratczak
  • Re: [Gmsh] Error : Self intersecting surface mesh, computing intersections (this could take a while) Zenker, Dr. Matthias
  • Re: [Gmsh] Error : Self intersecting surface mesh, computing intersections (this could take a while) Zenker, Dr. Matthias
  • Re: [Gmsh] Error : Self intersecting surface mesh, computing intersections (this could take a while) Zenker, Dr. Matthias
  • Re: [Gmsh] Error : Self intersecting surface mesh, computing intersections (this could take a while) Zenker, Dr. Matthias
  • Re: [Gmsh] Error : Self intersecting surface mesh, computing intersections (this could take a while) Zenker, Dr. Matthias
  • Re: [Gmsh] Error : Self intersecting surface mesh, computing intersections (this could take a while) Zenker, Dr. Matthias
  • Re: [Gmsh] Error : Self intersecting surface mesh, computing intersections (this could take a while) Zenker, Dr. Matthias
  • Re: [Gmsh] Error : Self intersecting surface mesh, computing intersections (this could take a while) Zenker, Dr. Matthias
• [Gmsh] OpenMP + step files Hugo Fernando Maia Milan
  • Re: [Gmsh] OpenMP + step files Christophe Geuzaine
• [Gmsh] Making a given point a vertex of the mesh Denis Davydov
• Re: [Gmsh] Mesh Size at circles Christophe Geuzaine
• [Gmsh] API: set algorithm Agnese, Marco
  • Re: [Gmsh] API: set algorithm Christophe Geuzaine
  • Re: [Gmsh] API: set algorithm Agnese, Marco
• [Gmsh] Optimize High Quality 2D Mesh John Assael
  • Re: [Gmsh] Optimize High Quality 2D Mesh Christophe Geuzaine
• [Gmsh] RE Meshing problem jean pierre aubry
• [Gmsh] elements are missing in a 3D mesh gael jarry
  • Re: [Gmsh] elements are missing in a 3D mesh Mikhail Artemyev
• [Gmsh] Auto 2D Mesh CellSize Optimization John Assael
• [Gmsh] High-Order Boundary layer with Subdivision Algorithm Willem Deconinck
  • Re: [Gmsh] High-Order Boundary layer with Subdivision Algorithm Christophe Geuzaine
  • Re: [Gmsh] High-Order Boundary layer with Subdivision Algorithm Willem Deconinck
• [Gmsh] Geometry.CopyMeshingMethod michele cavalerin
  • [Gmsh] I: Geometry.CopyMeshingMethod michele cavalerin
• [Gmsh] Extrusion problem - gmsh vincent . lucas
• [Gmsh] uniform mesh refinement Jaensson, N.O.
  • Re: [Gmsh] uniform mesh refinement Christophe Geuzaine
• [Gmsh] Build error with CGNS enabled Greaves, Timothy M B
  • Re: [Gmsh] Build error with CGNS enabled Greaves, Timothy M B
  • Re: [Gmsh] Build error with CGNS enabled Christophe Geuzaine
• [Gmsh] Problem generating a hole inside a volume Mauricio Vinassa
  • Re: [Gmsh] Problem generating a hole inside a volume Zenker, Dr. Matthias
  • Re: [Gmsh] Problem generating a hole inside a volume Mauricio Vinassa
  • Re: [Gmsh] Problem generating a hole inside a volume Zenker, Dr. Matthias
• [Gmsh] Extremely small ratio of the smallest characteristic length to the size of the model leads to an error (self intersecting surface mesh) Juha Ritala
  • Re: [Gmsh] Extremely small ratio of the smallest characteristic length to the size of the model leads to an error (self intersecting surface mesh) Juha Ritala
  • Re: [Gmsh] Extremely small ratio of the smallest characteristic length to the size of the model leads to an error (self intersecting surface mesh) Juha Ritala
• Re: [Gmsh] quad4 / hexa8 / hexa20 Christophe Geuzaine
• [Gmsh] RE Node label : some more ... jean pierre aubry
• [Gmsh] Node label Philippe Ackerer
  • Re: [Gmsh] Node label : some more ... Philippe Ackerer
  • Re: [Gmsh] Node label Christophe Geuzaine
• [Gmsh] memory leak in addRuledFaces from api Cosmin Stefan Deaconu
  • Re: [Gmsh] memory leak in addRuledFaces from api Christophe Geuzaine
• [Gmsh] Extraction of elements whose edges are on the boundary Sacconi, Andrea
  • Re: [Gmsh] Extraction of elements whose edges are on the boundary jeremy theler
• [Gmsh] conversion med file to msh file - duplicate id number for solids and faces to be used in getdP Frederic Trillaud
  • Re: [Gmsh] conversion med file to msh file - duplicate id number for solids and faces to be used in getdP Christophe Geuzaine
• [Gmsh] 3D meshing problem adrien gros
  • Re: [Gmsh] 3D meshing problem Christophe Geuzaine
• [Gmsh] Now, I am lost :( Philippe Ackerer
  • Re: [Gmsh] Now, I am lost :( Christophe Geuzaine
• [Gmsh] Identification numbers Philippe Ackerer
  • Re: [Gmsh] Identification numbers Christophe Geuzaine
• Re: [Gmsh] Important question for my Thesis Zenker, Dr. Matthias

• Earlier messages
• Later messages