Date: Wed, 06 Feb 2002 09:45:39 +0100 From: Christian Gennerat <[EMAIL PROTECTED]> Subject: Re: [LIB] ct50/70 X config file
Matthew Hanson a �crit : > Date: Wed, 06 Feb 2002 01:28:23 +0000 > From: "Matthew Hanson" <[EMAIL PROTECTED]> > Subject: Re: [LIB] ct50/70 X config file > > > This site is talking about burning the ISO image to a CD that can be made > bootable. I don't know about the newer Libs, but I'm pretty sure these L50s > and L70s won't boot from a CD-ROM drive. They won't. But they can boot with a floppy (prepared with rawrite and an image on the CD) And the you can install from a PCMCIA CD (for instance Freecom) or a PCMCIA SCSI card and a SCSI CD or a PCMCIA network card connected to the desktop reading the CD (or the equivalent ISO file) > > > I think I remember reading posts on loading Linux into the Lib's HDD by > removing it from the Lib and connecting it to a desktop... but then you run > into problems with setup between the Lib and the desktop, don't you. > > I'm wondering what the best way to load Mandrake onto a L7O would be. Neil > was saying he could use his method with a L70, only a L50 for some unknown > reason. > -- The falsely dramatic drives out the truly dull. ************************************************************** http://libretto.basiclink.com - Libretto mailing list http://libretto.basiclink.com/archive - Archives http://www.picante.com/~gtaylor/portable/faq.html - FAQ -------TO UNSUBSCRIBE------- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe --------TO UNSUBSCRIBE DIGEST------ Do above but with this on subject line: cmd:unsubscribe digest **************************************************************
