linuxppc-embedded  

Messages by Thread

• • Re: Anybody have an mpc5200b mscan linux driver under 2.6.24, ARCH=powerpc or equiv? Wolfgang Grandegger
  • RE: Anybody have an mpc5200b mscan linux driver under 2.6.24, ARCH=powerpc or equiv? Mike Timmons
  • Re: Anybody have an mpc5200b mscan linux driver under 2.6.24, ARCH=powerpc or equiv? Wolfgang Grandegger
  • RE: Anybody have an mpc5200b mscan linux driver under 2.6.24, ARCH=powerpc or equiv? Mike Timmons
• IBM_NEW_EMAC should depends on CONFIG_CRC32?? Wang, Baojun
• MPC8641D Msi Marco Stornelli
  • Re: MPC8641D Msi Kumar Gala
  • Re: MPC8641D Msi Marco Stornelli
• Xilinx EDK 10.1 and XUPV2P: A little report Ricardo
• Linux 2.6, Xilinx EDK 10.1 and XUPV2P: A little report Ricardo Ribalda Delgado
• Device tree for powerpc boards. Leonid
  • Re: Device tree for powerpc boards. Jon Loeliger
  • RE: Device tree for powerpc boards. Leonid
• [PATCH] Added support for PRTLVT based boards (MPC5121) David Jander
  • Re: [PATCH] Added support for PRTLVT based boards (MPC5121) John Rigby
  • Re: [PATCH] Added support for PRTLVT based boards (MPC5121) David Jander
  • Re: [PATCH] Added support for PRTLVT based boards (MPC5121) John Rigby
  • Re: [PATCH] Added support for PRTLVT based boards (MPC5121) David Jander
• Correct way to adjust PCI resource allocations? Trevor Anderson
• Freescale MPC8321 support David Goodenough
  • Re: Freescale MPC8321 support Scott Wood
• Reserving small amounts of memory with mem= (MPC85xx, 2.6.15 arch/ppc) Florian Boelstler
  • Re: Reserving small amounts of memory with mem= (MPC85xx, 2.6.15 arch/ppc) Sylvain Joyeau
  • Re: Reserving small amounts of memory with mem= (MPC85xx, 2.6.15 arch/ppc) Florian Boelstler
  • Re: Reserving small amounts of memory with mem= (MPC85xx, 2.6.15 arch/ppc) Scott Wood
  • Re: Reserving small amounts of memory with mem= (MPC85xx, 2.6.15 arch/ppc) Florian Boelstler
• Question on assigning interrupts in a dts Michael Galea
  • RE: Question on assigning interrupts in a dts Mike Timmons
  • Re: Question on assigning interrupts in a dts Michael Galea
  • Re: Question on assigning interrupts in a dts Scott Wood
• Non PCI HCD Implementation Amarendra_Reddy
• PCI Express error on MPC8641D-HPCN Reinhard Weiss
  • Re: PCI Express error on MPC8641D-HPCN Marco Stornelli
• SPIDEV in xilinx-spi driver A. Nolson
• [PATCH 1/2] Added support for PRTLVT based boards (MPC5121) David Jander
  • [PATCH 2/2] Re-added support for FEC on MPC5121 from Freescale LTIB David Jander
  • Re: [PATCH 2/2] Re-added support for FEC on MPC5121 from Freescale LTIB Scott Wood
  • Re: [PATCH 2/2] Re-added support for FEC on MPC5121 from Freescale LTIB David Jander
  • Re: [PATCH 2/2] Re-added support for FEC on MPC5121 from Freescale LTIB Scott Wood
  • Re: [PATCH 2/2] Re-added support for FEC on MPC5121 from Freescale LTIB Grant Likely
  • Re: [PATCH 2/2] Re-added support for FEC on MPC5121 from Freescale LTIB John Rigby
  • Re: [PATCH 1/2] Added support for PRTLVT based boards (MPC5121) Scott Wood
  • Re: [PATCH 1/2] Added support for PRTLVT based boards (MPC5121) Grant Likely
  • Re: [PATCH 1/2] Added support for PRTLVT based boards (MPC5121) David Jander
  • Re: [PATCH 1/2] Added support for PRTLVT based boards (MPC5121) Scott Wood
  • Re: [PATCH 1/2] Added support for PRTLVT based boards (MPC5121) Grant Likely
  • [PATCH 1/2] Added support for PRTLVT based boards (MPC5121) David Jander
  • [PATCH 2/2] Re-added support for FEC on MPC5121 from Freescale LTIB to current head David Jander
  • Re: [PATCH 2/2] Re-added support for FEC on MPC5121 from Freescale LTIB to current head Kumar Gala
  • Re: [PATCH 2/2] Re-added support for FEC on MPC5121 from Freescale LTIB to current head Grant Likely
  • Re: [PATCH 2/2] Re-added support for FEC on MPC5121 from Freescale LTIB to current head David Jander
  • Re: [PATCH 2/2] Re-added support for FEC on MPC5121 from Freescale LTIB to current head Grant Likely
  • Re: [PATCH 1/2] Added support for PRTLVT based boards (MPC5121) Grant Likely
  • Re: [PATCH 1/2] Added support for PRTLVT based boards (MPC5121) David Gibson
  • Re: [PATCH 1/2] Added support for PRTLVT based boards (MPC5121) Grant Likely
• Ooops... Re: [PATCH] prtlvt board support (MPC5121e) added David Jander
• PPC to PowerPC Migration Andy Schmidt
  • RE: PPC to PowerPC Migration John Linn
  • RE: PPC to PowerPC Migration Mike Timmons
  • Re: PPC to PowerPC Migration vb
  • Re: PPC to PowerPC Migration Jon Loeliger
  • Re: PPC to PowerPC Migration vb
  • RE: PPC to PowerPC Migration Darcy Watkins
  • Re: PPC to PowerPC Migration vb
  • Re: PPC to PowerPC Migration Scott Wood
  • RE: PPC to PowerPC Migration Darcy Watkins
  • Re: PPC to PowerPC Migration Josh Boyer
  • RE: PPC to PowerPC Migration Darcy Watkins
  • Re: PPC to PowerPC Migration Josh Boyer
  • RE: PPC to PowerPC Migration Darcy Watkins
  • Re: PPC to PowerPC Migration Josh Boyer
  • Re: PPC to PowerPC Migration Darcy Watkins
  • Re: PPC to PowerPC Migration Andrew Schmidt
  • Re: PPC to PowerPC Migration Jens Wirth
  • Re: PPC to PowerPC Migration Grant Likely
• [PATCH] prtlvt board support (MPC5121e) added David Jander
• Problem in flashing of yaffs image. Misbah khan
• Linux w/o UBoot from Linear Flash Sam Karp
  • Re: Linux w/o UBoot from Linear Flash Grant Likely
• move kernel virtual base jay_chen
• Concern regarding Booting up of linux board ... Misbah khan
  • Re: Concern regarding Booting up of linux board ... Josh Boyer
  • Re: Concern regarding Booting up of linux board ... Misbah khan
  • Re: Concern regarding Booting up of linux board ... Marco Stornelli
• 10th Real-Time Linux Workshop - Call for Papers Wang, Baojun
  • 10th Real-Time Linux Workshop - Call for Papers Wang, Baojun
• Evalution board Barisa Kisku
  • Re: Evalution board Jon Smirl
• FP and signal 4 - Reyneke
  • Re: FP and signal 4 Josh Boyer
  • Re: FP and signal 4 Stefan Roese
  • RE: FP and signal 4 - Reyneke
  • Re: FP and signal 4 Stefan Roese
  • Re: FP and signal 4 Jon Loeliger
• The 2.6.25 kernel dosen't run on pq2fads based board Matvejchikov Ilya
  • Re: The 2.6.25 kernel dosen't run on pq2fads based board Scott Wood
  • Re: The 2.6.25 kernel dosen't run on pq2fads based board Matvejchikov Ilya
  • Re: The 2.6.25 kernel dosen't run on pq2fads based board Detlev Zundel
• Is the linux-2.6.25.4 compatible with freescale lite5200b? Henry Chen
  • Re: Is the linux-2.6.25.4 compatible with freescale lite5200b? Detlev Zundel
  • RE: Is the linux-2.6.25.4 compatible with freescale lite5200b? Mike Timmons
  • RE: Is the linux-2.6.25.4 compatible with freescale lite5200b? Mike Timmons
  • Re: Is the linux-2.6.25.4 compatible with freescale lite5200b? Detlev Zundel
• No console output when booting linux from uboot Qin, Laigui (GE EntSol, Security)
  • Re: No console output when booting linux from uboot Detlev Zundel
  • RE: No console output when booting linux from uboot Qin, Laigui (GE EntSol, Security)
  • Re: No console output when booting linux from uboot Detlev Zundel
  • RE: No console output when booting linux from uboot Qin, Laigui (GE EntSol, Security)
  • Re: No console output when booting linux from uboot Detlev Zundel
  • Re: No console output when booting linux from uboot Matvejchikov Ilya
• How accessing to my IP registers from Linux Ludovic Desroches
  • Re: How accessing to my IP registers from Linux A. Nolson
  • Re: How accessing to my IP registers from Linux Ludovic Desroches
• XLlTemac port forwarding probelm? khollan
• ML507 EDK 10.1 somshekar c kadam
  • RE: ML507 EDK 10.1 John Linn
  • RE: ML507 EDK 10.1 somshekar c kadam
  • RE: ML507 EDK 10.1 somshekar c kadam
  • RE: ML507 EDK 10.1 somshekar c kadam
  • ML507 EDK 10.1 SP2 somshekar c kadam
• Re: Linux on a NCD Explora 450 Xterm Anthony Louvet
• FW: Error occured when appended FPGA image in the section of .init.text then bootup 朱利达
  • Re: FW: Error occured when appended FPGA image in the section of .init.text then bootup Alan Nishioka
  • Re: FW: Error occured when appended FPGA image in the section of .init.text then bootup David H. Lynch Jr.
  • Re: Error occured when appended FPGA image in the section of .init.text then bootup Josh Boyer
  • Re: Error occured when appended FPGA image in the section of .init.text then bootup David H. Lynch Jr.
  • Re: Error occured when appended FPGA image in the section of .init.text then bootup Josh Boyer
  • RE: Error occured when appended FPGA image in the section of .init.text then bootup 朱利达
• Re: Timer task synchronization Spoorthi KA
  • Re: Timer task synchronization Detlev Zundel
• ABI Document Sachin Rane
  • RE: ABI Document Sachin Rane
• Block driver Concern. Misbah khan
• Question on PowerPC's JTAG instruction John Zhou
  • Re: Question on PowerPC's JTAG instruction Laurent Pinchart
• platform drivers bhanu jampala
• USB Host Controller driver for the MPC8270 processor Huub Eikens
  • Re: USB Host Controller driver for the MPC8270 processor Laurent Pinchart
  • USB Host-to-Serial or USB Host-to-Ethernet Huub Eikens
  • RE: USB Host-to-Serial or USB Host-to-Ethernet Li Yang
  • RE: USB Host-to-Serial or USB Host-to-Ethernet Huub Eikens
  • Re: USB Host Controller driver for the MPC8270 processor PhilippeCurie
• Cross toolchain for ppc405 (virtex-4) Mirek23
  • RE: Cross toolchain for ppc405 (virtex-4) John Linn
  • RE: Cross toolchain for ppc405 (virtex-4) rodolfo
  • RE: Cross toolchain for ppc405 (virtex-4) John Linn
  • RE: Cross toolchain for ppc405 (virtex-4) rodolfo
  • Re: Cross toolchain for ppc405 (virtex-4) David H. Lynch Jr.
  • Re: Cross toolchain for ppc405 (virtex-4) Detlev Zundel
• one question to ask for your help about JTAG programming John Zhou
• linux powerpc and device trees - Reyneke
  • Re: linux powerpc and device trees Marco Stornelli
  • Re: linux powerpc and device trees Laurent Pinchart
  • Re: linux powerpc and device trees Josh Boyer
• Building Cross Compiler for MPC8260ADS Misbah khan
  • RE: Building Cross Compiler for MPC8260ADS SETTE AGOSTINO - technolabs
  • Re: Building Cross Compiler for MPC8260ADS Norbert van Bolhuis
  • Re: Building Cross Compiler for MPC8260ADS Robert Schwebel
• APU FPU in Virtex ppc405 David H. Lynch Jr.
  • Re: APU FPU in Virtex ppc405 Grant Likely
  • Re: APU FPU in Virtex ppc405 Shanyuan Gao
  • Re: APU FPU in Virtex ppc405 John Bonesio
  • Re: APU FPU in Virtex ppc405 Ron Sass
• [PATCH] [POWERPC] Add the PC speaker only when requested so Emil Medve
  • Re: [PATCH] [POWERPC] Add the PC speaker only when requested so Grant Likely
  • Re: [PATCH] [POWERPC] Add the PC speaker only when requested so Kumar Gala
  • Re: [PATCH] [POWERPC] Add the PC speaker only when requested so Grant Likely
  • RE: [PATCH] [POWERPC] Add the PC speaker only when requested so Medve Emilian
• Question about "native" compiling Bruce_Leonard
  • Re: Question about "native" compiling Scott Wood
  • RE: Question about "native" compiling Rune Torgersen
  • Re: Question about "native" compiling Kumar Gala
  • Re: Question about "native" compiling Bruce_Leonard
• [PATCH] [POWERPC] Fix return value check logic Emil Medve
  • Re: [PATCH] [POWERPC] Fix return value check logic Michael Ellerman
  • RE: [PATCH] [POWERPC] Fix return value check logic Medve Emilian
  • RE: [PATCH] [POWERPC] Fix return value check logic Medve Emilian
  • RE: [PATCH] [POWERPC] Fix return value check logic Michael Ellerman
  • RE: [PATCH] [POWERPC] Fix return value check logic Medve Emilian
• Help needed in debugging the crash of kernel stack overflow sandeep malik
  • Re: Help needed in debugging the crash of kernel stack overflow Kumar Gala
• Help to setup non-zero PPC_MEMSTART on PPC440 jie han
• [no subject] José Luis Añamuro
• Re: A working SPI driver in linux Malik Abdul Rehman
  • Re: A working SPI driver in linux Nader Sabzevari
  • Re: A working SPI driver in linux Nader Sabzevari
• Instruction OCM mojtaba
  • RE: Instruction OCM Stephen Neuendorffer
  • RE: Instruction OCM mojtaba
  • RE: Instruction OCM Koss, Mike (Mission Systems)
  • Re: Instruction OCM Sergey Temerkhanov
  • RE: Instruction OCM mojtaba
  • Re: Instruction OCM Temerkhanov
  • RE: Instruction OCM Stephen Neuendorffer
• sys/termios.h not found narendra sisodiya
• Why the flash always say "flash not erased" in u-boot? 郭劲
• MTD on Freescale 5200B - supported? Albrecht Dreß
  • Re: MTD on Freescale 5200B - supported? Grant Likely
  • Re: MTD on Freescale 5200B - supported? Albrecht Dreß
  • Re: MTD on Freescale 5200B - supported? Robert Schwebel

• Earlier messages
• Later messages