Julian,
I'm not sure which way I'll go. I'll either use a Z18T head, manifolds, dizzy with a
Z20 timing cover if I can find the stuff at the right price or Z20 head, inlet
manifold and 8 plug dizzy or I'll just modify what I've got by welding some injector
bosses on the manifold, slip in some 036 injectors, make an injector rail and bolt up
an XF throttle body.Most computers can be configured to suit most dizzies or crank
angle sensors but the dizzy needs to be locked up.The MT-8 I just bought is going on
a 4G61T mitsi motor but I hope to use it on the L20turbo motor on weekends etc. as I
now have another daily driver.
Andrew Smith
Julian wrote:
> You are going to run efi on your L-series turbo?
>
> How did you go getting the EFI manifolds? What distributor (crank angle sensor?)
> are you using?
>
> Im considering making up a EFI Lseries turbo running a fuel only computer for the
> moment as i wasn't sure how you go getting a CAS running on the engine..
>
> - Julian
>
> andrew smith wrote:
>
> > Paddy,
> > I just use a series 2 electronic Bluebird dizzy with a Bosch T-coil. It's set
> > at 15deg initial with 6deg mechanical advance plus standard vacum so under
> > boost it has 21deg. Works ok. Turbowise in Perth modified the advance curve for
> > $50 they also cleaned and tested it.You can run more mechanical advance but you
> > must use a boost retard- vacum advance diaphram. I've used these before and
> > they work well but aftermarket ones are quite expensive although turbo rotary
> > ones can be modified to fit. I didn't bother doing this as I'm changing to
> > efi.My MT-8 arrived today.
> > Andrew Smith
> >
> > paddy mcmillan wrote:
> >
> > > g`day,
> > > was hopin it wasnt a shitty turbo as i hadnt been able to find anything
> > > on these from the net at all.
> > > i was thinkin of maybe using a cam i have here that has .472" lift and
> > > 270 dur and a 110 lobe sep, got any thoughts on that?
> > > as for the dizzy itll be a 200b (thats the best i got) and converted to
> > > electronic. (crane xr700)
> > > got any suggestions for the dizzy setup? i gather itll need less total and
> > > more initial advance
> > > how do you make it retard when on boost? is this easy to do?
> > > thanks
> > > Paddy
> > >
> >
>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
