i got a second seat of 99E for about $4K and it includes a 'free' upgrade to DXP not too bad don't know if they are still offerring that though
Dennis Saputelli Cam Andruik wrote: > > I have to agree that Protel99SE does what I need it to do. And I have used > it long enough to know the workarounds. The price of upgrading looks too > high and a new seat is outrageous! Add to that the ATS price and I will be > staying with 99SE. > > Cam > > -----Original Message----- > From: Jon Elson [mailto:[EMAIL PROTECTED]] > Sent: July 10, 2002 12:46 PM > To: Protel EDA Forum > Subject: Re: [PEDA] ATS - don't do it! (was restore defaults...) > > Igor Gmitrovic wrote: > > > Tom, > > > > many of them will join us, they just keep it quiet. It would be probably > better from our users' point of view if more people voiced their opinion. > That would hopefully let them understand we are serious when we say 'We are > not buying this anymore'. > > We made the mistake of blindly buying Protel 98, and were very disappointed. > When 99 came out, we said "NO WAY", and kept using what we had. When 99SE > came out, I tried it with trepidation, assuming it would be even worse. > But, it > worked well, solved some shortcomings in the earlier software, so we then > upgraded. But, we will look long and hard before paying for any more > upgrades. > The need to do something major that we can't do now would be the only > reason > to upgrade. Protel 99SE pretty much does what it is supposed to do for > schematic => PCB. Maybe people using microvias or something might need > more features. > > Jon > ************************************************************************ * Tracking #: E6A52C2342640F408188C95B8131951BAE262C5F * ************************************************************************ -- ___________________________________________________________________________ www.integratedcontrolsinc.com Integrated Controls, Inc. tel: 415-647-0480 2851 21st Street fax: 415-647-3003 San Francisco, CA 94110 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/[email protected] * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
