>----- Original Message ----- >From: "Bruce Walter" <[EMAIL PROTECTED]> >To: "Protel EDA Forum" <[EMAIL PROTECTED]> >Sent: Tuesday, July 23, 2002 6:14 PM >Subject: Re: [PEDA] Auto-Pan patch <was> Speaking of Protel Bugs. >
>Where is there more detail about this fix? > >I tried moving both my Placement Tools and PCBtoolbar box into my work area. I also >tried having my Windows Task Manager always on top in >my work area. Each produced little or no change. > >Am I missing something, or is there detail somewhere else that I can be referred to? > >I assume we are talking about the problem when panning off the edge of the board and >some buffer gets filled up producing a 'locked' condition >where the buffer has to be emptied before your mouse movement is seen or responded to. I made several remarks how this could be remedied by >Protel during a discussion several years ago. > If you want, my patch is here, copy this link into your internet explorer address bar: ftp://ftp.point-lab.com/quartus/Public/ProtelUsers/ Take the "ProtelAutopanPatch.zip" file. Read the readme file inside the zip & look at the example placement picture. If you system is slow, the panning will become more chunky, but the mouse will never get stuck when panning over a blank area of you circuit board. If your system is fast, there should be no change in the panning performance, except that again, the mouse will no longer get stuck at any time. I you use just my horizontal patch & un-dock Protel's tolls so that the cover as much vertical PCB area as possible on one side, again, this should almost eliminate the sticking of the mouse pointer. ____________ Brian Guralnick [EMAIL PROTECTED] Voice (514) 624-4003 Fax (514) 624-3631 ************************************************************************ * Tracking #: 93BCB2C6DF12CD4C9D0DC6D09EA7E745DFE7CD47 * ************************************************************************ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/[email protected] * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
