Bob,

You can do a Select All, and then Move everything to the right until the
whatever it is out there is within the editable area of the PCB, or if you
are sure that you want to just dump it do a Select Outside, and enclose the
Board and everything you want to keep, and then do a Control Delete to
delete everything selected "outside", which will delete whatever it is out
there.

Don't you just love it - Protel will let you move things out there, but not
get out there to get rid of them.

I've had things lost out there before without causing any problems excepting
to gerbers, but who knows, maybe this is related to the other problem.

Other than that, your Polygon Plane numbers look OK, unless possibly you
have a Polygon Plane out there in left field (or somewhere else). Might want
to do a Select Outside and delete everything outside the bounds of the
design anyway, just for the heck of it.

JaMi

----- Original Message -----
From: "Robert M. Wolfe" <[EMAIL PROTECTED]>
To: "Protel EDA Forum" <[EMAIL PROTECTED]>
Sent: Thursday, January 23, 2003 5:51 PM
Subject: Re: [PEDA] Polygon Filled Planes


> Jami,
> OK Polygon Planes is set to 0 grid, .4mm (.016) track width and
> .2mm (.012) minimum size. 45 deg fill.
>
> With these settings I have never seen problems before though.
>
> Also one other note we just found out.
> Ther is what I believe a via out of editable area
> of board. I am not 100% sure it is a via, though it
> does have the size of my via holes. It showed up of
> course when gerbers were done.
>
> I can't seem to grab it by querry, or select outside box, or
> seeing if there was holes at these coordinates in the drill
> file all to no avail.
>
> Could this pad be part of that plane somehow and causing
> the exception error with the plane.
>
> Thanks
> Bob
>
>

* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Forum Guidelines Rules:
* http://www.techservinc.com/protelusers/forumrules.html
*
* Browse or Search previous postings:
* http://www.mail-archive.com/proteledaforum@techservinc.com
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

Reply via email to