Hi All,

This break wire feature is new to dxp, 99 had
no break function at all.

Darren Moore


> -----Original Message-----
> From: John A. Ross [RSDTV] [mailto:[EMAIL PROTECTED] 
> 
> 
> > -----Original Message-----
> > From: Abd ul-Rahman Lomax [mailto:[EMAIL PROTECTED] 
> > 
> > snip <
> 
> > >  Even with a net label on the wire, I still see a diode's pins 
> > >shorted. Yes, I have a junction but both pins are shorted.
> > >Am I missing any thing obvious here?
> > 
> > Yes. I wrote that the autobreak facility was in DXP. Now, if 
> > I recall correctly -- I can't check on this notebook because 
> > my 99SE installation on it is broken -- you can drop a 
> > resistor on a wire and the wire *will* be broken, but the 
> > middle wire segment is not deleted. You have to manually 
> > delete it, one extra step. In practice, you might want to 
> > move it out of the way before deleting it.... But I'm not 
> > sure of my memory. It has become simpler in DXP.
> 
> Does not work for me in 99SE. It is really a DXP feature.
> 
> 99SE > If I have an existing wire and drop a resistor onto it 
> 2 junctions are placed at each
> resistor pin. But no separate wire segment is created 'under' 
> the part between the 2 pins. 
> 
> If an attempt is made to select the wire segment between the 
> 2 resistor pins (under it) then the
> whole wire will be selected. No additional 'nodes' have been 
> added at the junctions created at the
> resistor pins or under the part to isolate that wire segment.
> 
> Unless I am missing some setting ? 
> 
> John



* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Forum Guidelines Rules:
* http://www.techservinc.com/protelusers/forumrules.html
*
* Browse or Search previous postings:
* http://www.mail-archive.com/[EMAIL PROTECTED]
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

Reply via email to