Hello,
I hope somebody can help my cause I'm getting nuts
with programming a Tait series I repeater.
I programmed a few dozend times the 27C64 eproms but
nothing works. The software I use is PGM800 for DOS
and also v4.x for Windows. My programmer can program
BIN files ok, cause I already programmed NOKIA/Kyodo
BSR450 repeaters in the past.
The setup of my TAIT is:
RX: T855-20
TX: T856-20
speaker and channel switch TS0089 (but I use the DIP
switches in the modules by disconnecting the cables)
I want to programm the modules for somewere between
431 and 439 MHz. As I saw, the -20 and -15 modules
are mostly identical, also are the produced files.
I hope someone can help me.
73
Bernd
DM5BM
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
