Bernd, I have the Tait T-800 series 1 software here, and I can check and send you a file of your freq's required. I have a T-800, which I reprogrammed a number of years ago, and did not have any problems. If there are any problems, I can always make a phone call to Tait, as there are home based here in NZ.
Regards Kevin. ZL1KFM. ----- Original Message ----- From: "Bernd Maestling" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Thursday, November 24, 2005 12:26 PM Subject: [Repeater-Builder] Help Tait T800 series 1 programming > Hello, > I hope somebody can help my cause I'm getting nuts > with programming a Tait series I repeater. > > I programmed a few dozend times the 27C64 eproms but > nothing works. The software I use is PGM800 for DOS > and also v4.x for Windows. My programmer can program > BIN files ok, cause I already programmed NOKIA/Kyodo > BSR450 repeaters in the past. > > The setup of my TAIT is: > RX: T855-20 > TX: T856-20 > speaker and channel switch TS0089 (but I use the DIP > switches in the modules by disconnecting the cables) > > I want to programm the modules for somewere between > 431 and 439 MHz. As I saw, the -20 and -15 modules > are mostly identical, also are the produced files. > > I hope someone can help me. > > 73 > Bernd > DM5BM > > > > > > > > > > > > > Yahoo! Groups Links > > > > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
