ortable with it
and it may be one or two years (or more) before you consider yourself a guru.
Once you understand the basic concepts, you'll find that the basic
features are very intuitive and logical.
Dennis Brunnenmeyer
Cedar Ridge Systems
*
ed frame and execute this key sequence, one
key at a time: Esc, m, p.
Cheers...
Dennis Brunnenmeyer
At 01:53 PM 2/1/2008, Pete Rourke wrote:
>Here is another newbie question.
>
>
>
>FM8 - XP (importing into a
override, a practice which should be avoided.
Dennis Brunnenmeyer
**
At 09:13 AM 1/24/2008, Charles Beck wrote:
>I don't know about a list, but they are easily obtainable by opening the
>Character Map utility that comes with
splay area in inches or centimeters, or in the example given,
1280/16 = 80 dpi.
End of rant ...
Flame away...but be sure you know what you are talking about and quit
misleading others if you don't understand this.
Dennis Brunnenmeyer
David...
This was not an attack on you. Please see my remarks embedded below.
Dennis...
At 02:07 PM 2/5/2008, you wrote:
>On Dennis Brunnenmeyer at dennisb at chronometrics.com wrote on 2/5/08 11:36
>AM:
>
you seem to understand what you are talking about when it"
>is a little strong. Life is too short, take a deep breath and enjoy!!
>Rick
>
>-Original Message-
>From: framers-bounces at lists.frameusers.com
>[mailto:framers-bounces at lists.frameusers.com] On Behalf O
on if the alphabets and characters are significantly different.
Dennis Brunnenmeyer
***
At 01:51 PM 2/14/2008, Lin Surasky wrote:
>Thanks, Art. I'm looking into that now. I see several sites have cost
>estimates, but no one has a time estimate (i.e., x many hours
gt;
>
>You are currently subscribed to Framers as dennisb at chronometrics.com.
>
>Send list messages to framers at lists.frameusers.com.
>
>To unsubscribe send a blank email to
>framers-unsubscribe at lists.frameusers.com
>or visit
>http://lists.frameusers.com/mailm
y know so much about your requirements.
These kind of petty bureaucrats like to wield power that isn't theirs
to wield. Don't let them intimidate you. Since you surely don't
report to them, enlist your manager to support you if need be, but
don't waste your valuab
Leah...
Try including <$paranum> in the appropriate location in the
cross-reference definitions and the index reference page formats.
Dennis Brunnenmeyer
**
At 12:39 AM 1/30/2008, Leah Smaller wrote:
>Good day to all,
>
>The procedure titles in our do
At 12:34 PM 6/7/2008, Jeremy H. Griffith wrote:
>For screenshots,
>use the same resolution at which they were taken, 96DPI; more or
>less will result in unreadable text.
Where does the "96DPI" figure come from?
Dennis...
Dennis Brunnenmeyer
Director of Engineering
CEDAR
iness community. I guess that must not have happened, but
before you sink money into a VISTA-only machine, I'd double-check the
validity of that rumor.
Dennis Brunnenmeyer
***
At 06:51 AM 6/19/2008, Rene Stephenson wrote:
>Hi All,
>
>My PC laptop is beaten up so badly
u consider its value with respect to salaries and time.
Dennis Brunnenmeyer
***
At 01:06 PM 6/19/2008, Rene Stephenson wrote:
>You're right, Dennis. I checked with an IT guru buddy who has done a
>lot of reworks of Vista machines when his clients got b
t
>http://lists.frameusers.com/mailman/options/framers/dennisb%40chronometrics.com
>
>Send administrative questions to listadmin at frameusers.com. Visit
>http://www.frameusers.com/ for more resources and info.
Dennis Brunnenmeyer
Director of Engineering
CEDAR RIDGE SYSTEMS
15019 Rattlesnake Road
Grass Valley, CA 95945-8710
Office: (530) 477-9015
Fax: (530) 477-9085
Mobile: (530) 320-9025
eMail: dennisb /at/ chronometrics /dot/ com
laced in-line in the main flow, say Flow A, in the target document?
Dennis Brunnenmeyer
**
At 12:31 PM 5/2/2008, Fred Ridder wrote:
>N. Jain asked:
>
> > I am learning FrameMaker 7.1. I have many times coming across
> posts mentioning text i
ences. Try it.
At 01:05 PM 5/2/2008, Jeremy H. Griffith wrote:
> >BTW: does anyone know of a similar utility that can pull graphics out of MS
> >Word documents?
Dennis Brunnenmeyer
Director of Engineering
CEDAR RIDGE SYSTEMS
15019 Rattlesnake Road
Grass Valley, CA 95945-8710
Office: (
have the originals, this seemed like manna
from heaven.
Dennis...
At 05:24 PM 5/2/2008, Jeremy H. Griffith wrote:
>On Fri, 02 May 2008 13:45:07 -0700, Dennis Brunnenmeyer
> wrote:
>
> >As far as I know, the previous sugge
ross-references that
require a reader to jump back and forth too many times in order to
assimilate a train of thought that ought to be presented in a linear
fashion. Just because you can do it doesn't mean it's the right thing to do.
Dennis Brunnen
esolution of the graphics adapter. If the
graphics card setting does not match the native resolution of the
monitor, aliasing artifacts in the viewed image can cause greater
legibility issues with fonts, especially small ones.
Dennis Brunnen
In a very recent post, I included an unfortunate typographical error.
The sentence below has been corrected.
Dennis...
***
At 12:41 PM 5/12/2008, Dennis Brunnenmeyer wrote:
>The electron beam in a CRT can
ue to be preferable. With lesser
quality displays, I suspect the opposite.
Amazon's Kindle apparently uses both serif and sans serif fonts.
Dennis...
****
At 03:30 PM 5/12/2008, Dennis Brunnenmeyer wrote:
>In
ges to framers at lists.frameusers.com.
>
>To unsubscribe send a blank email to
>framers-unsubscribe at lists.frameusers.com
>or visit
>http://lists.frameusers.com/mailman/options/framers/dennisb%40chronometrics.com
>
>Send administrative questions to listadmin at frameusers.com. Visit
>http://www.frameusers.com/ for more resources and info.
Dennis Brunnenmeyer
Director of Engineering
CEDAR RIDGE SYSTEMS
15019 Rattlesnake Road
Grass Valley, CA 95945-8710
Office: (530) 477-9015
Fax: (530) 477-9085
Mobile: (530) 320-9025
eMail: dennisb /at/ chronometrics /dot/ com
essages, on the hand, and you won't.
>
>I'm currently on eight lists. Seven of them add a Reply-To field so
>that replies go the list. Framers is the odd one out.
Dennis Brunnenmeyer
Director of Engineering
CEDAR RIDGE SYSTEMS
15019 Rattlesnake Road
Grass Valley, CA 95945-8710
Office: (530) 477-9015
Fax: (530) 477-9085
Mobile: (530) 320-9025
eMail: dennisb /at/ chronometrics /dot/ com
m: FOLKDJ-L
Subject: FOLKDJ-L - 19 May 2008 - Special issue (#2008-427)
To: FOLKDJ-L at LISTS.PSU.EDU
Note that a Reply to any message in the digest is a Reply to the list.
Dennis...
Dennis Brunnenmeyer
Director of Engineering
CEDAR RIDGE SYSTEMS
15019 Rattlesnake Road
Grass Valley, CA 95945-8710
Of
ved
since, but I often found text from diagrams had shifted or was
missing altogether. *.emf files were better but not better enough.
I use Illustrator instead.
Dennis Brunnenmeyer...
*
At 11:50 AM 5/29/2008, Milan Davidovic wrote:
>On Thu, May 29, 2008 at 2
Aravind...
Consider using the free plug-in called refIcons for this sort of
thing. It's available here. Be sure to get the CudSpanDocs.pdf file
as well. Once installed and set up, it should do exactly what you
want every time.
http://www.freeframers.org/freeware/cud/
Dennis Brunnen
trait
orientation, and it's simple to switch back and forth.
Dennis Brunnenmeyer
At 06:51 PM 9/4/2008, Dave Reynolds wrote:
>Hi
>
>Not exactly Frame related, but I'm after some advice about LCD
>monitors. After being the only
Use RefIcons by Cudspan.
At 03:18 AM 1/4/2009, Leah wrote:
>FM 7.0 ; Windows XP
>
>In one of our products, users can choose between 2 programming syntaxes.
>Until now we have produced 2 different versions of the Reference Guide
>(using conditional text).
>
>We now want
Use RefIcons by Cudspan.
At 03:18 AM 1/4/2009, Leah wrote:
>FM 7.0 ; Windows XP
>
>In one of our products, users can choose between 2 programming syntaxes.
>Until now we have produced 2 different versions of the Reference Guide
>(using conditional text).
>
>We now want
Adrianne
What application you were using to create your PDF files from the DWG
files in the first place? I've never had a problem with PDFs created
from CAD packages using the Adobe PDF virtual printer installed with Frame.
Dennis Brunnenmeyer
At 05:44
y know so much about your requirements.
These kind of petty bureaucrats like to wield power that isn't theirs
to wield. Don't let them intimidate you. Since you surely don't
report to them, enlist your manager to support you if need be, but
don't waste your valuab
Leah...
Try including <$paranum> in the appropriate location in the
cross-reference definitions and the index reference page formats.
Dennis Brunnenmeyer
**
At 12:39 AM 1/30/2008, Leah Smaller wrote:
>Good day to all,
>
>The procedure titles in our do
ed frame and execute this key sequence, one
key at a time: Esc, m, p.
Cheers...
Dennis Brunnenmeyer
At 01:53 PM 2/1/2008, Pete Rourke wrote:
>Here is another newbie question.
>
>
>
>FM8 - XP (importing into a
override, a practice which should be avoided.
Dennis Brunnenmeyer
**
At 09:13 AM 1/24/2008, Charles Beck wrote:
>I don't know about a list, but they are easily obtainable by opening the
>Character Map utility that comes with
splay area in inches or centimeters, or in the example given,
1280/16 = 80 dpi.
End of rant ...
Flame away...but be sure you know what you are talking about and quit
misleading others if you don't understand this.
Dennis Brunnenmeyer
David...
This was not an attack on you. Please see my remarks embedded below.
Dennis...
At 02:07 PM 2/5/2008, you wrote:
>On Dennis Brunnenmeyer at [EMAIL PROTECTED] wrote on 2/5/08 11:36
>AM:
>
> &
erstand what you are talking about when it"
>is a little strong. Life is too short, take a deep breath and enjoy!!
>Rick
>
>-Original Message-
>From: [EMAIL PROTECTED]
>[mailto:[EMAIL PROTECTED] On Behalf Of Dennis Brunnenmeyer
>Sent: Tuesday, February 05, 2008 2:
on if the alphabets and characters are significantly different.
Dennis Brunnenmeyer
***
At 01:51 PM 2/14/2008, Lin Surasky wrote:
>Thanks, Art. I'm looking into that now. I see several sites have cost
>estimates, but no one has a time estimate (i.e., x many hours
gt;
>
>You are currently subscribed to Framers as [EMAIL PROTECTED]
>
>Send list messages to [EMAIL PROTECTED]
>
>To unsubscribe send a blank email to
>[EMAIL PROTECTED]
>or visit
>http://lists.frameusers.com/mailman/options/framers/dennisb%40chronometrics.com
>
>
___
>
>
>You are currently subscribed to Framers as [EMAIL PROTECTED]
>
>Send list messages to [EMAIL PROTECTED]
>
>To unsubscribe send a blank email to
>[EMAIL PROTECTED]
>or visit
>http://lists.frameusers.com/mailman/options/fra
ortable with it
and it may be one or two years (or more) before you consider yourself a guru.
Once you understand the basic concepts, you'll find that the basic
features are very intuitive and logical.
Dennis Brunnenmeyer
Cedar Ridge Systems
*
laced in-line in the main flow, say Flow A, in the target document?
Dennis Brunnenmeyer
**
At 12:31 PM 5/2/2008, Fred Ridder wrote:
>N. Jain asked:
>
> > I am learning FrameMaker 7.1. I have many times coming across
> posts mentioning text i
ences. Try it.
At 01:05 PM 5/2/2008, Jeremy H. Griffith wrote:
> >BTW: does anyone know of a similar utility that can pull graphics out of MS
> >Word documents?
Dennis Brunnenmeyer
Director of Engineering
CEDAR RIDGE SYSTEMS
15019 Rattlesnake Road
Grass Valley, CA 95945-8710
Office: (
have the originals, this seemed like manna
from heaven.
Dennis...
At 05:24 PM 5/2/2008, Jeremy H. Griffith wrote:
>On Fri, 02 May 2008 13:45:07 -0700, Dennis Brunnenmeyer
><[EMAIL PROTECTED]> wrote:
>
> >As far as
ross-references that
require a reader to jump back and forth too many times in order to
assimilate a train of thought that ought to be presented in a linear
fashion. Just because you can do it doesn't mean it's the right thing to do.
Dennis Brunnen
esolution of the graphics adapter. If the
graphics card setting does not match the native resolution of the
monitor, aliasing artifacts in the viewed image can cause greater
legibility issues with fonts, especially small ones.
Dennis Brunnen
In a very recent post, I included an unfortunate typographical error.
The sentence below has been corrected.
Dennis...
***
At 12:41 PM 5/12/2008, Dennis Brunnenmeyer wrote:
>The electron beam in a CRT can
ue to be preferable. With lesser
quality displays, I suspect the opposite.
Amazon's Kindle apparently uses both serif and sans serif fonts.
Dennis...
****
At 03:30 PM 5/12/2008, Dennis Brunnenmeyer wrote:
>In
inion, there's nothing in this world beats a '52 Vincent
>and a redheaded girl." -- Richard Thompson
> No disclaimers apply.
> DoD 358
>___
>
>
>You are currently subscribed to Framers as [EMAIL PROTECTED]
>
>Sen
essages, on the hand, and you won't.
>
>I'm currently on eight lists. Seven of them add a Reply-To field so
>that replies go the list. Framers is the odd one out.
Dennis Brunnenmeyer
Director of Engineering
CEDAR RIDGE SYSTEMS
15019 Rattlesnake Road
Grass Valley, CA 95945-8710
Off
and Bluegrass DJs <[EMAIL PROTECTED]>
From: FOLKDJ-L <[EMAIL PROTECTED]>
Subject: FOLKDJ-L - 19 May 2008 - Special issue (#2008-427)
To: [EMAIL PROTECTED]
Note that a Reply to any message in the digest is a Reply to the list.
Dennis...
Dennis Brunnenmeyer
Director of Engineering
CEDA
ved
since, but I often found text from diagrams had shifted or was
missing altogether. *.emf files were better but not better enough.
I use Illustrator instead.
Dennis Brunnenmeyer...
*
At 11:50 AM 5/29/2008, Milan Davidovic wrote:
>On Thu, May 29, 2008 at 2
Aravind...
Consider using the free plug-in called refIcons for this sort of
thing. It's available here. Be sure to get the CudSpanDocs.pdf file
as well. Once installed and set up, it should do exactly what you
want every time.
http://www.freeframers.org/freeware/cud/
Dennis Brunnen
At 12:34 PM 6/7/2008, Jeremy H. Griffith wrote:
>For screenshots,
>use the same resolution at which they were taken, 96DPI; more or
>less will result in unreadable text.
Where does the "96DPI" figure come from?
Dennis...
Dennis Brunnenmeyer
Director of Engineering
CEDAR
iness community. I guess that must not have happened, but
before you sink money into a VISTA-only machine, I'd double-check the
validity of that rumor.
Dennis Brunnenmeyer
***
At 06:51 AM 6/19/2008, Rene Stephenson wrote:
>Hi All,
>
>My PC laptop is beaten up so badly
u consider its value with respect to salaries and time.
Dennis Brunnenmeyer
***
At 01:06 PM 6/19/2008, Rene Stephenson wrote:
>You're right, Dennis. I checked with an IT guru buddy who has done a
>lot of reworks of Vista machines when his clients got b
trait
orientation, and it's simple to switch back and forth.
Dennis Brunnenmeyer
At 06:51 PM 9/4/2008, Dave Reynolds wrote:
>Hi
>
>Not exactly Frame related, but I'm after some advice about LCD
>monitors. After being the only
gardless, if you want the best results.
Dual displays are really the only way to go if you have the desk space to
put two of them side-by-side. Once you start using them, you'll wonder why
you didn't do it sooner.
Dennis Brunnenmeyer
Cedar Ridge Systems
Grass Valley, CA
Adrianne
What application you were using to create your PDF files from the DWG
files in the first place? I've never had a problem with PDFs created
from CAD packages using the Adobe PDF virtual printer installed with Frame.
Dennis Brunnenmeyer
At 05:44
gardless, if you want the best results.
Dual displays are really the only way to go if you have the desk space to
put two of them side-by-side. Once you start using them, you'll wonder why
you didn't do it sooner.
Dennis Brunnenmeyer
Cedar Ridge Systems
Grass Valley, CA
atted with consistent
paragraph and character formats. Yet when I go to update the book to
hopefully generate a TOC, there are no entries in the Generate and Don't
Generate windows.
Does anyone have any idea why this might be the case?
TIA for any suggestions.
Dennis
--
Dennis Br
From: Framers [mailto:framers-bounces+wreng=tycoint@lists.frameusers.com]
On Behalf Of Dennis Brunnenmeyer
Sent: Tuesday, November 22, 2016 7:17 AM
To: FramMaker Postings
Subject: [Framers] Unable to generate a TOC
OS: Windows 7 Professional, 64-bit
Program: FrameMaker 7.2
User: Struggli
IA for any advice.
Dennis...
--
Dennis Brunnenmeyer
Director of Marketing
*Fullfidelity Music^®*
15019 Rattlesnake Road
Grass Valley, CA 95945**
dennisb/at/ fullfidelitymusic /dot/ com
+1 (530) 477-9015
___
This message is from the Framers mailing
eusers.com]
*On Behalf Of *Dennis Brunnenmeyer
*Sent:* Tuesday, November 22, 2016 3:32 PM
*To:* FramMaker Postings
*Subject:* [Framers] A FrameMaker bug or is something wrong with my files?
OS: Windows 7 Professional, 64-bit
FrameMaker 7.2
Semi-knowledgeable, infrequent user
I've managed to
uatro@lists.frameusers.com]
On Behalf Of Dennis Brunnenmeyer
Sent: Tuesday, November 22, 2016 8:28 PM
To: Craig, Alison; FramMaker Postings
Subject: Re: [Framers] A FrameMaker bug or is something wrong with my files?
It was something to do with the file itself. The problem followed the chapter
in question w
FrameMaker 7.2, Unstructured
Windows 7 Professional, 64-bit
Target output: PDF only
As a relatively new beginner, I hate to bother experts with this
question, but where can I find concise information about the topics
below. I have the original Adobe 7.0 book as well as their Classroom In
A Boo
or unstructured, structured, and XML/DITA content. There is a large and loyal
...
Archives located at http://www.mail-archive.com/framers%40lists.frameusers.com/
framers -
mail-archive.com<http://www.mail-archive.com/framers%40lists.frameusers.com/>
www.mail-archive.com
Messages by Threa
Hello Z...
Thanks for your warning about the Control-key functions. I assume though
that it is still OK to access the paragraph and character designers with
the Ctrl+D and the Ctrl+M keystrokes. Is that true or should I rely on
the menus to open those designers?
Dennis...
---
lock
of text is, well, deleted.
Is there a fix for this?
Dennis...
--
Dennis Brunnenmeyer
Host | Nevada City Limits
KVMR-FM / KCPC-FM Radio
120 Bridge Street
Nevada City, CA 95959
p: (530) 477-9015
m: (530) 320-9025
dennis.brunnenme...@gmail.com
or
d
Windows 7 Professional, 64-bit.
--
Dennis Brunnenmeyer
Host | Nevada City Limits
KVMR-FM / KCPC-FM Radio
120 Bridge Street
Nevada City, CA 95959
p: (530) 477-9015
m: (530) 320-9025
dennis.brunnenme...@gmail.com
or
denn...@kvmr.org
On Mon, May 15, 2017 at 6:31 PM, Robert Lauriston
wrote
It's not an evil suggestion, but I am under considerable pressure to meet a
critical deadline. I don't have the funds to upgrade nor the time to climb
yet another steep learning curve.
Dennis...
--
Dennis Brunnenmeyer
Host | Nevada City Limits
KVMR-FM / KCPC-FM Radio
120 Bridge Str
ecall encountering this issue is my previous applications.
--
Dennis Brunnenmeyer
Host | Nevada City Limits
KVMR-FM / KCPC-FM Radio
120 Bridge Street
Nevada City, CA 95959
p: (530) 477-9015
m: (530) 320-9025
dennis.brunnenme...@gmail.com
or
denn...@kvmr.org
On Mon, May 15, 2017 at 6:42 PM, Robert Lauriston
h—formerly two cents in value but
readjusted for inflation.
Dennis...
--
Dennis Brunnenmeyer
Host | Nevada City Limits
KVMR-FM / KCPC-FM Radio
120 Bridge Street
Nevada City, CA 95959
p: (530) 477-9015
m: (530) 320-9025
dennis.brunnenme...@gmail.com
or
denn...@kvmr.org
On Mon, Aug 28, 2017 at 5:20
Why not just number your appendices rather than using characters from the
keyboard, like this:
Appendix 1: Specifications
Dennis...
--
Dennis Brunnenmeyer
Host | Nevada City Limits
KVMR-FM / KCPC-FM Radio / KVMR.org
120 Bridge Street
Nevada City, CA 95959
p: (530) 477-9015
m: (530) 320-9025
suggestions would be appreciated. Thanks in advance.
Dennis..
--
Dennis Brunnenmeyer
Host | Nevada City Limits
KVMR-FM / KCPC-FM Radio / KVMR.org
120 Bridge Street
Nevada City, CA 95959
p: (530) 477-9015
m: (530) 320-9025
dennis.brunnenme...@gmail.com
o
I did as you suggested, but neither Liberation Serif nor Times (by itself)
appeared anywhere in the file.
Dennis...
--
Dennis Brunnenmeyer
Host | Nevada City Limits
KVMR-FM / KCPC-FM Radio / KVMR.org
120 Bridge Street
Nevada City, CA 95959
p: (530) 477-9015
m: (530) 320-9025
dennis.brunnenme
Thanks everyone to all of you who responded, especially Fred Ridder, for
helping me with this. Turning off the 'Remember Missing Font Names' was the
easy solution to an otherwise annoying issue.
Dennis...
--
Dennis Brunnenmeyer
Host | Nevada City Limits
KVMR-FM / KCPC-FM Radio / KV
eby making it easy to purge those two catalogs?
I apologize if I've overlooked something that should be obvious. Thanks in
advance for your help (again)!
Dennis
--
Dennis Brunnenmeyer
Host | Nevada City Limits
KVMR-FM / KCPC-FM Radio / KVMR.org
120 Bridge Street
Nevada City, CA 95959
p: (
Once again, I thank everyone for your help with this. As it turns out, I
already had the two Silicon Prairie plug-ins AND the Cuspan tools from back
in the day. Now all I have to do is re-install them, review the
documentation and have a go at 'em.
Dennis...
--
Dennis Brunnenmeyer
Host | N
ow to solve my current issues. Maybe later ... ?
Dennis...
--
Dennis Brunnenmeyer
Host | Nevada City Limits
KVMR-FM / KCPC-FM Radio / KVMR.org
120 Bridge Street
Nevada City, CA 95959
p: (530) 477-9015
m: (530) 320-9025
dennis.brunnenme...@gmail.com
or
denn...@kvmr.org
On Thu, Aug 9, 2018 at 11:24 A
knew the .dll file was there, but his
> documentation no longer seems to be available. It was the documentation I
> was offering. I have it because I keep EVERYTHING. (My hard drive is where
> I hoard.) :)
>
> On Thu, Aug 9, 2018 at 4:38 PM, Dennis Brunnenmeyer <
> dennis
s. They were top-end
cards and not really all that old; they just didn't have all of the
features needed to support some of Windows 10's advanced graphics
capabilities.
Good luck. I hope it all works out for you.
--
Dennis Brunnenmeyer
Host | Nevada City Limits
KVMR-FM / KCPC-FM Rad
; ___
>
> This message is from the Framers mailing list
>
> Send messages to framers@lists.frameusers.com
> Visit the list's homepage at http://www.frameusers.com
> Archives located at
> http://www.mail-archive.com/framers%40lists.fra
t; Send administrative questions to listad...@frameusers.com
> ___
>
> This message is from the Framers mailing list
>
> Send messages to framers@lists.frameusers.com Visit the list's homepage
> at http://www.frameusers.com Arc
84 matches
Mail list logo