IPLed Volume
Hello, If I have two RES volume( example IPE100 and IPE101) in my system, then how can I find the detail about 1) from which RES volume my system is currently IPLed. 2) Is there any option in SMPE panel, by which we can come to know about volume detail, my target datasets are pointing to. Also in which volume my DDDEF are defined ( example SYSUT1 and SYSUT2 etc) Regards Saurabh -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: ADRDSSU issue
Yes, some of the dataset were copied and the target dataset were not cataloged. In my earlier JCL, I have not specified Process(SYS1), but still I was able to copy SYS1 datasets. Regards Saurabh Khandelwal On 4/7/2011 7:24 AM, chen lucky wrote: I have following question about this ADRDSSU COPY, 1.in original post, there is no 'delete' parameter specified, but even so, there are still some DataSets had been copied successfully. Do not know why, may these copied ones are not cataloged? seems not the reason. 2.'PROCESS(SYS1)' is also not specified, but some SYS1.** get copied successfully, still do not know why, strange…… 2011/4/7 Schwarz, Barry Abarry.a.schw...@boeing.com I had non-managed VSAM datasets (zFS to be exact) on z/OS 1.8. -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of Lizette Koehler Sent: Wednesday, April 06, 2011 5:34 AM To: IBM-MAIN@bama.ua.edu Subject: Re: ADRDSSU issue I see you are at z/OS V1.9. VSAM datasets If I remember are always SMS Managed and it is not until z/OS V1.12 that you can use indirect VSAM cataloging. I am not sure you can copy the same name VSAM dataset. You may need to copy to a new VSAM dataset name -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: IPLed Volume
Hi, The Display IPLINFO command will tell you where you IPL's from. In SMP/E go to option 1, select you zone and then look at DDDEFS. You can also to a list ddefs command in batch. Gadi From: IBM Mainframe Discussion List [IBM-MAIN@bama.ua.edu] On Behalf Of SAURABH KHANDELWAL [saurabh.khandel...@oracle.com] Sent: 07 April 2011 09:36 To: IBM-MAIN@bama.ua.edu Subject: IPLed Volume Hello, If I have two RES volume( example IPE100 and IPE101) in my system, then how can I find the detail about 1) from which RES volume my system is currently IPLed. 2) Is there any option in SMPE panel, by which we can come to know about volume detail, my target datasets are pointing to. Also in which volume my DDDEF are defined ( example SYSUT1 and SYSUT2 etc) Regards Saurabh -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html לשימת לבך, בהתאם לנהלי החברה וזכויות החתימה בה, כל הצעה, התחייבות או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר מסמך כאמור (לרבות מסמך סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. Please note that in accordance with Malam's signatory rights, no offer, agreement, concession or representation is binding on the company, unless accompanied by a duly signed separate document (or a scanned version thereof), affixed with the company's seal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: IPLed Volume- ISMF Panel
Thanks for reply. Do we have any option is ISMF panel to know Particular volume is mapped to which storage group. Regards Saurabh On 4/7/2011 12:21 PM, גדי בן אבי wrote: Hi, The Display IPLINFO command will tell you where you IPL's from. In SMP/E go to option 1, select you zone and then look at DDDEFS. You can also to a list ddefs command in batch. Gadi From: IBM Mainframe Discussion List [IBM-MAIN@bama.ua.edu] On Behalf Of SAURABH KHANDELWAL [saurabh.khandel...@oracle.com] Sent: 07 April 2011 09:36 To: IBM-MAIN@bama.ua.edu Subject: IPLed Volume Hello, If I have two RES volume( example IPE100 and IPE101) in my system, then how can I find the detail about 1) from which RES volume my system is currently IPLed. 2) Is there any option in SMPE panel, by which we can come to know about volume detail, my target datasets are pointing to. Also in which volume my DDDEF are defined ( example SYSUT1 and SYSUT2 etc) Regards Saurabh -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html לשימת לבך, בהתאם לנהלי החברה וזכויות החתימה בה, כל הצעה, התחייבות או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר מסמך כאמור (לרבות מסמך סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. Please note that in accordance with Malam's signatory rights, no offer, agreement, concession or representation is binding on the company, unless accompanied by a duly signed separate document (or a scanned version thereof), affixed with the company's seal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: IPLed Volume- ISMF Panel
IS.6(Option might vary but check it up) would take you to list the storage groups then you can type LISTVOL beside the storage group to know the volumes available for a storage group. 2011/4/7 SAURABH KHANDELWAL saurabh.khandel...@oracle.com Thanks for reply. Do we have any option is ISMF panel to know Particular volume is mapped to which storage group. Regards Saurabh On 4/7/2011 12:21 PM, גדי בן אבי wrote: Hi, The Display IPLINFO command will tell you where you IPL's from. In SMP/E go to option 1, select you zone and then look at DDDEFS. You can also to a list ddefs command in batch. Gadi From: IBM Mainframe Discussion List [IBM-MAIN@bama.ua.edu] On Behalf Of SAURABH KHANDELWAL [saurabh.khandel...@oracle.com] Sent: 07 April 2011 09:36 To: IBM-MAIN@bama.ua.edu Subject: IPLed Volume Hello, If I have two RES volume( example IPE100 and IPE101) in my system, then how can I find the detail about 1) from which RES volume my system is currently IPLed. 2) Is there any option in SMPE panel, by which we can come to know about volume detail, my target datasets are pointing to. Also in which volume my DDDEF are defined ( example SYSUT1 and SYSUT2 etc) Regards Saurabh -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html לשימת לבך, בהתאם לנהלי החברה וזכויות החתימה בה, כל הצעה, התחייבות או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר מסמך כאמור (לרבות מסמך סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. Please note that in accordance with Malam's signatory rights, no offer, agreement, concession or representation is binding on the company, unless accompanied by a duly signed separate document (or a scanned version thereof), affixed with the company's seal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: IPLed Volume- ISMF Panel
Hello Jags, I was aware about this option. But the problem is, I have 25 storage group in our system so it is difficult to go into each of the storage group and use this listvol option. I am looking for the direct option, in which if we provide volume serial number, we should be able to get Storage group from which it is connected. Regards Saurabh Khandelwal On 4/7/2011 3:00 PM, jagadishan perumal wrote: IS.6(Option might vary but check it up) would take you to list the storage groups then you can type LISTVOL beside the storage group to know the volumes available for a storage group. 2011/4/7 SAURABH KHANDELWAL saurabh.khandel...@oracle.com mailto:saurabh.khandel...@oracle.com Thanks for reply. Do we have any option is ISMF panel to know Particular volume is mapped to which storage group. Regards Saurabh On 4/7/2011 12:21 PM, גדי בן אבי wrote: Hi, The Display IPLINFO command will tell you where you IPL's from. In SMP/E go to option 1, select you zone and then look at DDDEFS. You can also to a list ddefs command in batch. Gadi From: IBM Mainframe Discussion List [IBM-MAIN@bama.ua.edu mailto:IBM-MAIN@bama.ua.edu] On Behalf Of SAURABH KHANDELWAL [saurabh.khandel...@oracle.com mailto:saurabh.khandel...@oracle.com] Sent: 07 April 2011 09:36 To: IBM-MAIN@bama.ua.edu mailto:IBM-MAIN@bama.ua.edu Subject: IPLed Volume Hello, If I have two RES volume( example IPE100 and IPE101) in my system, then how can I find the detail about 1) from which RES volume my system is currently IPLed. 2) Is there any option in SMPE panel, by which we can come to know about volume detail, my target datasets are pointing to. Also in which volume my DDDEF are defined ( example SYSUT1 and SYSUT2 etc) Regards Saurabh -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu mailto:lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html לשימת לבך, בהתאם לנהלי החברה וזכויות החתימה בה, כל הצעה, התחייבות או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר מסמך כאמור (לרבות מסמך סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. Please note that in accordance with Malam's signatory rights, no offer, agreement, concession or representation is binding on the company, unless accompanied by a duly signed separate document (or a scanned version thereof), affixed with the company's seal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu mailto:lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu mailto:lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: IPLed Volume- ISMF Panel
Then if your shop has QW chicagosoft product installed then you can query the volume serial to know the stg group. Regards, Jags On Thu, Apr 7, 2011 at 3:04 PM, SAURABH KHANDELWAL saurabh.khandel...@oracle.com wrote: Hello Jags, I was aware about this option. But the problem is, I have 25 storage group in our system so it is difficult to go into each of the storage group and use this listvol option. I am looking for the direct option, in which if we provide volume serial number, we should be able to get Storage group from which it is connected. Regards Saurabh Khandelwal On 4/7/2011 3:00 PM, jagadishan perumal wrote: IS.6(Option might vary but check it up) would take you to list the storage groups then you can type LISTVOL beside the storage group to know the volumes available for a storage group. 2011/4/7 SAURABH KHANDELWAL saurabh.khandel...@oracle.com Thanks for reply. Do we have any option is ISMF panel to know Particular volume is mapped to which storage group. Regards Saurabh On 4/7/2011 12:21 PM, גדי בן אבי wrote: Hi, The Display IPLINFO command will tell you where you IPL's from. In SMP/E go to option 1, select you zone and then look at DDDEFS. You can also to a list ddefs command in batch. Gadi From: IBM Mainframe Discussion List [IBM-MAIN@bama.ua.edu] On Behalf Of SAURABH KHANDELWAL [saurabh.khandel...@oracle.com] Sent: 07 April 2011 09:36 To: IBM-MAIN@bama.ua.edu Subject: IPLed Volume Hello, If I have two RES volume( example IPE100 and IPE101) in my system, then how can I find the detail about 1) from which RES volume my system is currently IPLed. 2) Is there any option in SMPE panel, by which we can come to know about volume detail, my target datasets are pointing to. Also in which volume my DDDEF are defined ( example SYSUT1 and SYSUT2 etc) Regards Saurabh -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html לשימת לבך, בהתאם לנהלי החברה וזכויות החתימה בה, כל הצעה, התחייבות או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר מסמך כאמור (לרבות מסמך סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. Please note that in accordance with Malam's signatory rights, no offer, agreement, concession or representation is binding on the company, unless accompanied by a duly signed separate document (or a scanned version thereof), affixed with the company's seal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: IPLed Volume- ISMF Panel
Sorry Jags, We don't have any other product rather then IBM. any other clue. Regards Saurabh Khandelwal On 4/7/2011 3:26 PM, jagadishan perumal wrote: Then if your shop has QW chicagosoft product installed then you can query the volume serial to know the stg group. Regards, Jags On Thu, Apr 7, 2011 at 3:04 PM, SAURABH KHANDELWAL saurabh.khandel...@oracle.com mailto:saurabh.khandel...@oracle.com wrote: Hello Jags, I was aware about this option. But the problem is, I have 25 storage group in our system so it is difficult to go into each of the storage group and use this listvol option. I am looking for the direct option, in which if we provide volume serial number, we should be able to get Storage group from which it is connected. Regards Saurabh Khandelwal On 4/7/2011 3:00 PM, jagadishan perumal wrote: IS.6(Option might vary but check it up) would take you to list the storage groups then you can type LISTVOL beside the storage group to know the volumes available for a storage group. 2011/4/7 SAURABH KHANDELWAL saurabh.khandel...@oracle.com mailto:saurabh.khandel...@oracle.com Thanks for reply. Do we have any option is ISMF panel to know Particular volume is mapped to which storage group. Regards Saurabh On 4/7/2011 12:21 PM, גדי בן אבי wrote: Hi, The Display IPLINFO command will tell you where you IPL's from. In SMP/E go to option 1, select you zone and then look at DDDEFS. You can also to a list ddefs command in batch. Gadi From: IBM Mainframe Discussion List [IBM-MAIN@bama.ua.edu mailto:IBM-MAIN@bama.ua.edu] On Behalf Of SAURABH KHANDELWAL [saurabh.khandel...@oracle.com mailto:saurabh.khandel...@oracle.com] Sent: 07 April 2011 09:36 To: IBM-MAIN@bama.ua.edu mailto:IBM-MAIN@bama.ua.edu Subject: IPLed Volume Hello, If I have two RES volume( example IPE100 and IPE101) in my system, then how can I find the detail about 1) from which RES volume my system is currently IPLed. 2) Is there any option in SMPE panel, by which we can come to know about volume detail, my target datasets are pointing to. Also in which volume my DDDEF are defined ( example SYSUT1 and SYSUT2 etc) Regards Saurabh -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu mailto:lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html לשימת לבך, בהתאם לנהלי החברה וזכויות החתימה בה, כל הצעה, התחייבות או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר מסמך כאמור (לרבות מסמך סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. Please note that in accordance with Malam's signatory rights, no offer, agreement, concession or representation is binding on the company, unless accompanied by a duly signed separate document (or a scanned version thereof), affixed with the company's seal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu mailto:lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu mailto:lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: DATACLASS
Jason, The DATACLAS ACS is not working for the IEFBR14 because the DSORG is null. The DASDM routines that can decide the DSORG of a dataset have not been called at this point, so if it isn't in your JCL this will not work. The method I've used in the past is to allocate a DCPS (the same name) after dropping through tests for RECORG and other DSORG. My memory is that VSAM allocation and directories in JCL will cause DSORG to be completed, so your test would be something like: SELECT WHEN (DATACLAS NE '') SET DATACLAS = DATACLAS WHEN (DSN = ABSPPS) AND (DSORG NE 'PO') AND (DSORG NE 'VS') AND (DSORG NE 'DA') SET DATACLAS = 'DCPS' OTHERWISE SET DATACLAS = 'DCSTD' END END Ron -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of ibmnew Sent: Wednesday, April 06, 2011 8:26 PM To: IBM-MAIN@bama.ua.edu Subject: Re: [IBM-MAIN] DATACLASS Hi Yes. I am trying to create a DATACLAS and associated rules that will provide a set of default characteristics for a DSORG=PS file. If DSORG=PS must be used in the JCL, We need change a lot of JCL. Is there other method to do it without using DSORG=PS in the JCL? Thanks a lot! Jason Cai --- Hi Thanks your answers. I am sorry that I just came back by holiday Today I submit the following JCL: //ALOCHSKP EXEC PGM=IEFBR14 //MESSAGE DD DSN=ABSP.CEB.TEST9,DISP=(NEW,CATLG,DELETE), //UNIT=3390,SPACE=(4096,(10,10)), // DCB=(LRECL=300,BLKSIZE=27900,RECFM=FB) Below is the output: Data class . . . . . : DCSTD Data Set Name . . . . : ABSP.CEB.TEST9 General Data Current Allocation Management class . . : **None**Allocated blocks . : 2 Storage class . . . : SCSTAND Allocated extents . : 1 Volume serial . . . : BD3A20 Device type . . . . : 3390 Data class . . . . . : DCSTD Organization . . . : PS Current Utilization Record format . . . : FB Used blocks . . . . : 0 Record length . . . : 300 Used extents . . . : 0 Block size . . . . : 27900 1st extent blocks . : 2 Secondary blocks . : 10 Dates Data set name type : Creation date . . . : 2011/04/07 SMS Compressible. . : NO Referenced date . . : ***None*** Expiration date . . : ***None*** Then I submit the other JCL below: //ALOCHSKP EXEC PGM=IEFBR14 //MESSAGE DD DSN=ABSP.CEB.TEST8,DISP=(NEW,CATLG,DELETE), //UNIT=3390,SPACE=(4096,(10,10)),DSORG=PS, // DCB=(LRECL=300,BLKSIZE=27900,RECFM=FB) The output is below:Data class . . . . . : DCPS Data Set Name . . . . : ABSP.CEB.TEST8 General Data Current Allocation Management class . . : **None**Allocated blocks . : 10 Storage class . . . : SCSTAND Allocated extents . : 1 Volume serial . . . : BD3A31 Device type . . . . : 3390 Data class . . . . . : DCPS Organization . . . : PS Current Utilization Record format . . . : FB Used blocks . . . . : 0 Record length . . . : 300 Used extents . . . : 0 Block size . . . . : 27900 1st extent blocks . : 10 Secondary blocks . : 10 Dates Data set name type : Creation date . . . : 2011/04/07 SMS Compressible. . : NO Referenced date . . : ***None*** Expiration date . . : ***None*** My question: When I allocate a dataset using PGM=IEFBR14 with SPACE=(4096,(10,10)), Could the parm of space ask system to allocate a PS dataset? Why do we must use DSORG=PS in the JCL? For LRECL=0 and BLKSIZE=0 I submit the following JCL //ALOCHSKP EXEC PGM=IEFBR14 //MESSAGE DD DSN=ABSP.CEB.TEST7,DISP=(NEW,CATLG,DELETE), //UNIT=3390,SPACE=(4096,(10,10)),DCB=PATTERN the PATTERN is allocted by the jcl below /D0 DD DSN=PATTERN,DISP=(NEW,CATLG),UNIT=3390, //DCB=(LRECL=0,BLKSIZE=0), //VOL=SER=BD3WK1,SPACE=(TRK,(0,0,0)) Thanks a lot! Jason Cai On 4/1/2011 18:36, Ron Hawkins wrote: I am 033x tomorrow! -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of Scott Ford Sent: Friday, April 01, 2011 2:35 PM To: IBM-MAIN@bama.ua.edu Subject: Re: [IBM-MAIN] DATACLASS NowI get it, thanks my man...btw I was 60 last august Sco Ron, NowI get it, thanks my man...btw I was 60 last august Scott J Ford From: Ron
Re: IPLed Volume- ISMF Panel
D SMS,VOL(volser) Rob Scott Lead Developer Rocket Software 275 Grove Street · Newton, MA 02466-2272 · USA Tel: +1.617.614.2305 Email: rsc...@rs.com Web: www.rocketsoftware.com -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of SAURABH KHANDELWAL Sent: 07 April 2011 10:59 To: IBM-MAIN@bama.ua.edu Subject: Re: IPLed Volume- ISMF Panel Sorry Jags, We don't have any other product rather then IBM. any other clue. Regards Saurabh Khandelwal On 4/7/2011 3:26 PM, jagadishan perumal wrote: Then if your shop has QW chicagosoft product installed then you can query the volume serial to know the stg group. Regards, Jags On Thu, Apr 7, 2011 at 3:04 PM, SAURABH KHANDELWAL saurabh.khandel...@oracle.com mailto:saurabh.khandel...@oracle.com wrote: Hello Jags, I was aware about this option. But the problem is, I have 25 storage group in our system so it is difficult to go into each of the storage group and use this listvol option. I am looking for the direct option, in which if we provide volume serial number, we should be able to get Storage group from which it is connected. Regards Saurabh Khandelwal On 4/7/2011 3:00 PM, jagadishan perumal wrote: IS.6(Option might vary but check it up) would take you to list the storage groups then you can type LISTVOL beside the storage group to know the volumes available for a storage group. 2011/4/7 SAURABH KHANDELWAL saurabh.khandel...@oracle.com mailto:saurabh.khandel...@oracle.com Thanks for reply. Do we have any option is ISMF panel to know Particular volume is mapped to which storage group. Regards Saurabh On 4/7/2011 12:21 PM, גדי בן אבי wrote: Hi, The Display IPLINFO command will tell you where you IPL's from. In SMP/E go to option 1, select you zone and then look at DDDEFS. You can also to a list ddefs command in batch. Gadi From: IBM Mainframe Discussion List [IBM-MAIN@bama.ua.edu mailto:IBM-MAIN@bama.ua.edu] On Behalf Of SAURABH KHANDELWAL [saurabh.khandel...@oracle.com mailto:saurabh.khandel...@oracle.com] Sent: 07 April 2011 09:36 To: IBM-MAIN@bama.ua.edu mailto:IBM-MAIN@bama.ua.edu Subject: IPLed Volume Hello, If I have two RES volume( example IPE100 and IPE101) in my system, then how can I find the detail about 1) from which RES volume my system is currently IPLed. 2) Is there any option in SMPE panel, by which we can come to know about volume detail, my target datasets are pointing to. Also in which volume my DDDEF are defined ( example SYSUT1 and SYSUT2 etc) Regards Saurabh -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu mailto:lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html לשימת לבך, בהתאם לנהלי החברה וזכויות החתימה בה, כל הצעה, התחייבות או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר מסמך כאמור (לרבות מסמך סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. Please note that in accordance with Malam's signatory rights, no offer, agreement, concession or representation is binding on the company, unless accompanied by a duly signed separate document (or a scanned version thereof), affixed with the company's seal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu mailto:lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu mailto:lists...@bama.ua.edu with the message: GET
Re: IPLed Volume- ISMF Panel
How about GPMSERVE(IBM product)... its a graphical user interface. you can query against the volume serial. On Thu, Apr 7, 2011 at 3:28 PM, SAURABH KHANDELWAL saurabh.khandel...@oracle.com wrote: Sorry Jags, We don't have any other product rather then IBM. any other clue. Regards Saurabh Khandelwal On 4/7/2011 3:26 PM, jagadishan perumal wrote: Then if your shop has QW chicagosoft product installed then you can query the volume serial to know the stg group. Regards, Jags On Thu, Apr 7, 2011 at 3:04 PM, SAURABH KHANDELWAL saurabh.khandel...@oracle.com wrote: Hello Jags, I was aware about this option. But the problem is, I have 25 storage group in our system so it is difficult to go into each of the storage group and use this listvol option. I am looking for the direct option, in which if we provide volume serial number, we should be able to get Storage group from which it is connected. Regards Saurabh Khandelwal On 4/7/2011 3:00 PM, jagadishan perumal wrote: IS.6(Option might vary but check it up) would take you to list the storage groups then you can type LISTVOL beside the storage group to know the volumes available for a storage group. 2011/4/7 SAURABH KHANDELWAL saurabh.khandel...@oracle.com Thanks for reply. Do we have any option is ISMF panel to know Particular volume is mapped to which storage group. Regards Saurabh On 4/7/2011 12:21 PM, גדי בן אבי wrote: Hi, The Display IPLINFO command will tell you where you IPL's from. In SMP/E go to option 1, select you zone and then look at DDDEFS. You can also to a list ddefs command in batch. Gadi From: IBM Mainframe Discussion List [IBM-MAIN@bama.ua.edu] On Behalf Of SAURABH KHANDELWAL [saurabh.khandel...@oracle.com] Sent: 07 April 2011 09:36 To: IBM-MAIN@bama.ua.edu Subject: IPLed Volume Hello, If I have two RES volume( example IPE100 and IPE101) in my system, then how can I find the detail about 1) from which RES volume my system is currently IPLed. 2) Is there any option in SMPE panel, by which we can come to know about volume detail, my target datasets are pointing to. Also in which volume my DDDEF are defined ( example SYSUT1 and SYSUT2 etc) Regards Saurabh -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html לשימת לבך, בהתאם לנהלי החברה וזכויות החתימה בה, כל הצעה, התחייבות או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר מסמך כאמור (לרבות מסמך סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. Please note that in accordance with Malam's signatory rights, no offer, agreement, concession or representation is binding on the company, unless accompanied by a duly signed separate document (or a scanned version thereof), affixed with the company's seal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: IPLed Volume- ISMF Panel
Thanks Rob. I am able to see storage group name against volume serial number. Regards Saurabh Khandelwal On 4/7/2011 3:46 PM, Rob Scott wrote: D SMS,VOL(volser) -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Multople zone in SMPE
Hello, By the time of server pac installation, we just defined one target and one distribution zone. But if we create two RES volume, for applying maintenance then in this we case we would require two target and distribution zone. And in this way we always apply maintenance not on running RES volume. We always do on another RES volume. Can anybody help me, how to setup multiple zone to follow above concept. Regards Saurabh Khandelwal -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: RESMIL in a MONOPLEX
On Thu, Apr 7, 2011 at 3:16 AM, Shane ibm-m...@tpg.com.au wrote: I thought we'd been through this before, but can't find it. Strictly speaking, this is a one system ring, and therefor you could expect some setup costs. ISTR Mr Fagen advancing the knowledge that in such a setup GRS has the smarts to ignore all the RSA management. But I can't find any evidence in the archives. So it probably doesn't matter what you set it to, although I've always preferred zero. As for the ENQ issues, maybe have a look at the ADRUENQ usermod. Dallas were always pretty accommodating when I needed to ask for something. Shane ... Doesn't that exit only apply to full volume dumps and the like. Our performance problems are related to logical dataset dumps. Jim McAlpine -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
SV: REXX INCLUDE ?
As we have the IBM rexx compiler I often use the include directive, e g: /*%INCLUDE ÖSETPARM*/ It works like copying the contents of member ÖSETPARM into the same place in the code. Regards, Thomas Berg _ Thomas Berg Specialist A M SWEDBANK -Ursprungligt meddelande- Från: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] För Sambataro, Anthony (NIH/CIT) [E] Skickat: den 6 april 2011 13:01 Till: IBM-MAIN@bama.ua.edu Ämne: Re: REXX INCLUDE ? The REXX compiler offers an %INCLUDE statement. You can initialize an entire stem variable quickly, for example: stem. = 0 stem.0 = 10 Will create a stem variable of 10 elements all with a value of zero. -Original Message- From: Miklos Szigetvari [mailto:miklos.szigetv...@isis-papyrus.com] Sent: Wednesday, April 06, 2011 6:01 AM To: IBM-MAIN@bama.ua.edu Subject: REXX INCLUDE ? Hi Some REXX questions: Any kind of REXX INCLUDE feature i.e include a REXX copybook ? We need some large initialized data areas, stems. What is the best or fastest way to do this? -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: IPLed Volume
I just have a suggestion... Create a batch procedure to copy your active IPL volume to your target IPL volume. The catalog entries are using indirect addressing either using symbolics or vol(**). Make sure all datasets that do not support indirect catalog entries are off the sysres (As I remember VSAM and zfs datasets do not support indirect catalog entries). In the procedure mass change all the dddefs in you target zone to replace the vol to point to your new target volume. If you have three sysres volumes... Target/backup/active you could continue working after a new sysres is implemented and still backoff. Also you could copy your target to the staging sysres (the previous backoff volume) avoiding mass change of smpe. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Multople zone in SMPE
Can anybody help me, how to setup multiple zone to follow above concept. Once I receive a new z/OS with the ServerPac or SystemPac, I use this steps to clone the delivered target zone: //COPYSMP EXEC PGM=ADRDSSU //SYSPRINT DD SYSOUT=* //SYSIN DD * COPY DATASET( - INCLUDE( - SMPE11.tgtzone_name.*, - ))- RENUNC(- (SMPE11.tgtzone.*,SMPE11.cloned_tgtzone.*) - )- OUTDYNAM(myvol) - TOL(ENQF) CATALOG Above step clones the target zone's CSI, along with its SMPxTS. The datasets' 2nd qualifier equals to the tgtzone or cloned_tgtzone names. //ADDZINDX EXEC PGM=GIMSMP //SMPCSI DD DISP=SHR,DSN=my.GLOBAL.CSI //SYSPRINT DD SYSOUT=* //SMPLOG DD DUMMY //SMPOUT DD SYSOUT=* //SMPCNTL DD * SET BDY(GLOBAL) . ZREN(tgtzone) TO(cloned_tgtzone) NEWDATASET(SMPE11.cloned_tgtzone.CSI). SET BDY(cloned_tgtzone) . ZEDIT DDDEF . CHANGE VOLUME(sysres,cloned_sysres) . ENDZEDIT . UCLIN. REP DDDEF(SMPLTS) DA(SMPE11.cloned_tgtzone.SMPLTS) . REP DDDEF(SMPMTS) DA(SMPE11.cloned_tgtzone.SMPMTS) . REP DDDEF(SMPSCDS) DA(SMPE11.cloned_tgtzone.SMPSCDS). REP DDDEF(SMPSTS) DA(SMPE11.cloned_tgtzone.SMPSTS) . ENDUCL. The above step adds the cloned_tgtzone' to the GLOBAL zone index, changes the sysres to every DDDEFs belonging to cloned_tgtzone, and changes the dataset names of allSMPxTS accordingly. I don't clone the DLIB zone, nor the DLIB volumes, since I leave one DLIB zone/volume(s) for x Target zones/volume(s) (where 'x' can be 2, 3, or 4) HTH Walter Marguccio z/OS Systems Programmer BELENUS LOB Informatic GmbH Munich - Germany -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Multople zone in SMPE
Thanks For help. Now I will try creating multiple target CSI and update you, I encountered any error. Regards Saurabh Khandelwal On 4/7/2011 6:50 PM, Walter Marguccio wrote: Can anybody help me, how to setup multiple zone to follow above concept. Once I receive a new z/OS with the ServerPac or SystemPac, I use this steps to clone the delivered target zone: //COPYSMP EXEC PGM=ADRDSSU //SYSPRINT DD SYSOUT=* //SYSIN DD * COPY DATASET( - INCLUDE( - SMPE11.tgtzone_name.*, - ))- RENUNC(- (SMPE11.tgtzone.*,SMPE11.cloned_tgtzone.*) - )- OUTDYNAM(myvol) - TOL(ENQF) CATALOG Above step clones the target zone's CSI, along with its SMPxTS. The datasets' 2nd qualifier equals to the tgtzone or cloned_tgtzone names. //ADDZINDX EXEC PGM=GIMSMP //SMPCSI DD DISP=SHR,DSN=my.GLOBAL.CSI //SYSPRINT DD SYSOUT=* //SMPLOG DD DUMMY //SMPOUT DD SYSOUT=* //SMPCNTL DD * SET BDY(GLOBAL) . ZREN(tgtzone) TO(cloned_tgtzone) NEWDATASET(SMPE11.cloned_tgtzone.CSI). SET BDY(cloned_tgtzone) . ZEDIT DDDEF . CHANGE VOLUME(sysres,cloned_sysres) . ENDZEDIT . UCLIN. REP DDDEF(SMPLTS) DA(SMPE11.cloned_tgtzone.SMPLTS) . REP DDDEF(SMPMTS) DA(SMPE11.cloned_tgtzone.SMPMTS) . REP DDDEF(SMPSCDS) DA(SMPE11.cloned_tgtzone.SMPSCDS). REP DDDEF(SMPSTS) DA(SMPE11.cloned_tgtzone.SMPSTS) . ENDUCL. The above step adds the cloned_tgtzone' to the GLOBAL zone index, changes the sysres to every DDDEFs belonging to cloned_tgtzone, and changes the dataset names of allSMPxTS accordingly. I don't clone the DLIB zone, nor the DLIB volumes, since I leave one DLIB zone/volume(s) for x Target zones/volume(s) (where 'x' can be 2, 3, or 4) HTH Walter Marguccio z/OS Systems Programmer BELENUS LOB Informatic GmbH Munich - Germany -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Multople zone in SMPE
You also need to the new target zone to the global zone : SET BDY(GLOBAL) /* ADD THE ADDITIONAL ZONE */ /* TO THE GLOBAL ZONE */ . UCLIN . ADD GLOBALZONE ZONEINDEX( (cloned-tgzone,new.taget.zone.dsn) ) . ENDUCL . * And copy the original zone into the newzone before doing the replace dddefs to pick up all the maint: ZONECOPY (Tgtzone) INTO (cloned-tgzone) RELATED (DLIBZONE) OPTIONS(OPTS) . When applying maintenance to the new zone, The ACCEPT step needs to relate the DLIB with the current target: //SMPCNTL DD * SETBDY(Dlibzone). UCLIN. 000693 REP DZONE(Dlibzone) 000693 RELATED(cloned-tgtzone) SREL() OPTIONS(optos). ENDUCL. ACCEPT . /* // -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of Walter Marguccio Sent: Thursday, April 07, 2011 9:21 AM To: IBM-MAIN@bama.ua.edu Subject: Re: Multople zone in SMPE Can anybody help me, how to setup multiple zone to follow above concept. Once I receive a new z/OS with the ServerPac or SystemPac, I use this steps to clone the delivered target zone: //COPYSMP EXEC PGM=ADRDSSU //SYSPRINT DD SYSOUT=* //SYSIN DD * COPY DATASET( - INCLUDE( - SMPE11.tgtzone_name.*, - ))- RENUNC(- (SMPE11.tgtzone.*,SMPE11.cloned_tgtzone.*) - )- OUTDYNAM(myvol) - TOL(ENQF) CATALOG Above step clones the target zone's CSI, along with its SMPxTS. The datasets' 2nd qualifier equals to the tgtzone or cloned_tgtzone names. //ADDZINDX EXEC PGM=GIMSMP //SMPCSI DD DISP=SHR,DSN=my.GLOBAL.CSI //SYSPRINT DD SYSOUT=* //SMPLOG DD DUMMY //SMPOUT DD SYSOUT=* //SMPCNTL DD * SET BDY(GLOBAL) . ZREN(tgtzone) TO(cloned_tgtzone) NEWDATASET(SMPE11.cloned_tgtzone.CSI). SET BDY(cloned_tgtzone) . ZEDIT DDDEF . CHANGE VOLUME(sysres,cloned_sysres) . ENDZEDIT . UCLIN. REP DDDEF(SMPLTS) DA(SMPE11.cloned_tgtzone.SMPLTS) . REP DDDEF(SMPMTS) DA(SMPE11.cloned_tgtzone.SMPMTS) . REP DDDEF(SMPSCDS) DA(SMPE11.cloned_tgtzone.SMPSCDS). REP DDDEF(SMPSTS) DA(SMPE11.cloned_tgtzone.SMPSTS) . ENDUCL. The above step adds the cloned_tgtzone' to the GLOBAL zone index, changes the sysres to every DDDEFs belonging to cloned_tgtzone, and changes the dataset names of allSMPxTS accordingly. I don't clone the DLIB zone, nor the DLIB volumes, since I leave one DLIB zone/volume(s) for x Target zones/volume(s) (where 'x' can be 2, 3, or 4) HTH Walter Marguccio z/OS Systems Programmer BELENUS LOB Informatic GmbH Munich - Germany -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at
Re: Floating point assembler code
All Here is another alternative for coding and testing all 3 flavors of IBM mainframe floating point including HFP, BFP, and DFP. The free open source zcobol compiler written in structured z390 portable mainframe assembler supports all the floating point formats using the latest COBOL draft standard for defining each of the 9 different floating point types in the data division. In the procedure division you can code compute statements to perform any floating point calculations you like mixing and matching any of the floating point types along with traditional data types. You can use if statements to test results, and you can use display statements to display results of compute statements. The zcobol compiler generates HLASM compatible assembler source code with data labels and paragraph labels so the generated code can be run using z390 emulator on Windows or Linux or you can take the generated assembler source to mainframe and assemble and execute it using HLASM. The zcobol code generator supports the latest z9, z10, and z196 instructions and uses the very powerful PFPO for conversions between floating point data types as required. When you download and install z390 via www.z390.org, it includes zcobol plus a number of demo and regression test programs such as the following: 1. z390\zcobol\test\TESTHFP1.CBL - test hex HFP data type calculations 2. z390\zcobol\test\TESTBFP1.CBL - test binary BFP data type calculations 3. z390\zcobol\test\TESTDFP1.CBL - test decimal DFP data type caculations Once z390 is installed on Windows or Linux, you can run zcobol demos with the command ZCRT390.BAT from GUI or command line. You can also run all the zcobol regression tests including the above 3 with the command ZCRTTEST.BAT. Note z390 v1.5.03 has new z196 instructions added, but the next release v1.5.04 will add some missing extended opcodes which are documented in SHARE presentation but are not in the latest POP. Don Higgins d...@higgins.net -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: *CNZ4201E OPERLOG HAS FAILED
Its a MonoPlex. The Logger storage group volume Loger01 was fully exhausted and we deleted some orphaned Log datasets and this Error message has stopped popping. Hi Jags, For a case of data set storage exhaustion, I would expect to see messages IXG310, IXG311, IXG312 highlighting an offload failure. In addition to allocating more volumes for logger data sets, you can run an IEAMDBLG to move operlog data out of the log stream, or set up a retention period/ autodelete policy to keep the log stream data from consuming all the data sets. Hi Nick, in this case If want to access operlog from ZOSA, how to switch? Hi Chen, If this hypothetical situation, if you had a two system sysplex with a DASDonly Operlog you could do one of two things to allow access on another system. 1) Migrate the logstream to the other system by a) disconnecting from operlog on ZOSB (V OPERLOG,HARDCPY,OFF)and b) then connect on ZOSA - or 2) 'upgrade' the logstream to a CF by a) disconnecting from operlog on ZOSB (V OPERLOG,HARDCPY,OFF)and b) updating the LOGR policy definition of the log steam to specify a structure name, and c) connecting on ZOSA and ZOSB -Nick Jones Logger L3 -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
JES3 on a zPDT running zOS 1.12?
We're running two zPDT development systems with the IBM ADCD zOS 1.12 system. I'd like to convert one to a JES3 system for testing. I found an older webpage that documented the Steps to Configure JES3 on ADCD: http://dtsc.dfw.ibm.com/MVSDS/'HTTPD2.ADCD.JES3.HTML($README)' Note: You may need to cut and paste to view the link. There were several errors in the setup guide, but were not difficult to work through. And all the JES3 data sets are available on the ADCD system -they reside on the ZCPRD2 volume. However, all the datasets were RACF protected (according to the VTOC), but there were no entries in the RACF DB. I used the ADDSD command to set UACC(ALTER) for all the JES3 data sets. During the IPL for JES3, the system prompts for the JES3 COLD start, and after selecting the cold start member it seems to hang: 09.06.37 *IAT3041 COLD START REQUIRED, ERROR READING JESCKPNT RECORD 09.06.37 IAT3011 SPECIFY JES3 START TYPE 09.06.37 *01 IAT3011 (C, L, H, HA, HR, HAR, W, WA, WR, WAR, OR CANCEL) 09.06.37 CMP001I DFSMS COMPRESSION SERVICES AVAILABLE 09.06.38 IEF404I BLSJPRMI - ENDED - TIME=09.06.38 09.06.41 CSV210I LIBRARY LOOKASIDE INITIALIZED 09.06.44 IRA600I SRM CHANNEL DATA NOW AVAILABLE FOR ALL SRM FUNCTIONS 09.07.20 1,c 09.07.20 IEE600I REPLY TO 01 IS;C 09.07.20 IAT2063 ADCD UNABLE TO DETERMINE THE STATUS OF JESXCF GROUP NAVAIL - NOT PRESENT IN COMPLEX STATUS RECORD 09.07.20 *02 IAT3012 SELECT JES3 INISH ORIGIN (N OR M=), AND OPTIONAL EXIT PARM (,P=) OR CANCEL 09.07.56 2,m=ft 09.07.56 IEE600I REPLY TO 02 IS;M=FT 09.07.56 IAT6369 JES3 WAITING FOR CHECKPOINT DATA SET RESERVE - CHKPNT ,ZCPRD2,0A86. 09.07.57 CSV028I ABEND806-04 JOBNAME=IEESYSAS STEPNAME=JES3AUX 09.07.57 IEF404I IEESYSAS - ENDED - TIME=09.07.57 09.08.36 IAT6397 FCT JSS (NODEVICE) HAS BEEN DISPATCHED CONTINUOUSLY FOR: 09.08.36 IAT6398 0 HOURS 00 MINUTES 30 SECONDS 09.08.37 IAT6415 at 0002BDE2 in LOADMOD=IATINIC , EPNAME=IATINIC ,EPADDR=00027E70,LEN=004190 09.08.37 *03 IAT6418 Reply 'JES3' to fail JES3 INITIALIZATION or 'nnn' to ask later At this point, I'm stuck and have zero JES3 experience to fall back on. I have been reading the RedBook The ABCs of zOS System Programming Volume 13, and have successfully run the JES3INFT JES3 parms used for the spool format through the JES3 verify utility. Questions: 1) Is the reserve message on the checkpoint normal? 2) JES3AUX used to be optional, but in zOS 1.12, JES3 always attempts the start. Is is required? And does it have it's own proc?? Any suggestions would be appreciated, Don -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: JES3 on a zPDT running zOS 1.12?
In case you are not a member, there is a JES3 mailing list. Don, In case you are not a member, there is a JES3 mailing list. To subscribe, send mail to lists...@listserv.uga.edu with the command: SUBSCRIBE JES3-L Thanks, Mark Regan From: Don Thimsen d...@dtssoftware.com To: IBM-MAIN@bama.ua.edu Sent: Thursday, April 7, 2011 10:23 AM Subject: JES3 on a zPDT running zOS 1.12? We're running two zPDT development systems with the IBM ADCD zOS 1.12 system. I'd like to convert one to a JES3 system for testing. I found an older webpage that documented the Steps to Configure JES3 on ADCD: http://dtsc.dfw.ibm.com/MVSDS/'HTTPD2.ADCD.JES3.HTML($README)' Note: You may need to cut and paste to view the link. There were several errors in the setup guide, but were not difficult to work through. And all the JES3 data sets are available on the ADCD system -they reside on the ZCPRD2 volume. However, all the datasets were RACF protected (according to the VTOC), but there were no entries in the RACF DB. I used the ADDSD command to set UACC(ALTER) for all the JES3 data sets. During the IPL for JES3, the system prompts for the JES3 COLD start, and after selecting the cold start member it seems to hang: 09.06.37 *IAT3041 COLD START REQUIRED, ERROR READING JESCKPNT RECORD 09.06.37 IAT3011 SPECIFY JES3 START TYPE 09.06.37 *01 IAT3011 (C, L, H, HA, HR, HAR, W, WA, WR, WAR, OR CANCEL) 09.06.37 CMP001I DFSMS COMPRESSION SERVICES AVAILABLE 09.06.38 IEF404I BLSJPRMI - ENDED - TIME=09.06.38 09.06.41 CSV210I LIBRARY LOOKASIDE INITIALIZED 09.06.44 IRA600I SRM CHANNEL DATA NOW AVAILABLE FOR ALL SRM FUNCTIONS 09.07.20 1,c 09.07.20 IEE600I REPLY TO 01 IS;C 09.07.20 IAT2063 ADCD UNABLE TO DETERMINE THE STATUS OF JESXCF GROUP NAVAIL - NOT PRESENT IN COMPLEX STATUS RECORD 09.07.20 *02 IAT3012 SELECT JES3 INISH ORIGIN (N OR M=), AND OPTIONAL EXIT PARM (,P=) OR CANCEL 09.07.56 2,m=ft 09.07.56 IEE600I REPLY TO 02 IS;M=FT 09.07.56 IAT6369 JES3 WAITING FOR CHECKPOINT DATA SET RESERVE - CHKPNT ,ZCPRD2,0A86. 09.07.57 CSV028I ABEND806-04 JOBNAME=IEESYSAS STEPNAME=JES3AUX 09.07.57 IEF404I IEESYSAS - ENDED - TIME=09.07.57 09.08.36 IAT6397 FCT JSS (NODEVICE) HAS BEEN DISPATCHED CONTINUOUSLY FOR: 09.08.36 IAT6398 0 HOURS 00 MINUTES 30 SECONDS 09.08.37 IAT6415 at 0002BDE2 in LOADMOD=IATINIC , EPNAME=IATINIC ,EPADDR=00027E70,LEN=004190 09.08.37 *03 IAT6418 Reply 'JES3 ' to fail JES3 INITIALIZATION or 'nnn' to ask later At this point, I'm stuck and have zero JES3 experience to fall back on. I have been reading the RedBook The ABCs of zOS System Programming Volume 13, and have successfully run the JES3INFT JES3 parms used for the spool format through the JES3 verify utility. Questions: 1) Is the reserve message on the checkpoint normal? 2) JES3AUX used to be optional, but in zOS 1.12, JES3 always attempts the start. Is is required? And does it have it's own proc?? Any suggestions would be appreciated, Don -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: JES3 on a zPDT running zOS 1.12?
Can you IPL with JES2 and do some RACF work? If so, then I'd do the following
RACF commands on JES2 to update RACF. Or, if you have the RACF subsystem active
on your system, you could possibley LOGON to the z/OS console and issue the
RACF commands from there using the RACF subsystem command prefix. I can do this
on our system. The RACF commands would be something like:
ADDUSER JES3 NAME('JES3 STC') OWNER(SYS1) NOPASSWORD DFLTGRP(SYS1) OPERATIONS
RDEF STARTED JES3.* STDATA(USER(JES3) GROUP(SYS1) TRACE(YES) TRUSTED(YES))
You should then be able to S JES3 and it should have all the RACF authority it
needs. Likely it will have too much, but at this point, I'd not really worry
about it.
--
John McKown
Systems Engineer IV
IT
Administrative Services Group
HealthMarkets(r)
9151 Boulevard 26 * N. Richland Hills * TX 76010
(817) 255-3225 phone *
john.mck...@healthmarkets.com * www.HealthMarkets.com
Confidentiality Notice: This e-mail message may contain confidential or
proprietary information. If you are not the intended recipient, please contact
the sender by reply e-mail and destroy all copies of the original message.
HealthMarkets(r) is the brand name for products underwritten and issued by the
insurance subsidiaries of HealthMarkets, Inc. -The Chesapeake Life Insurance
Company(r), Mid-West National Life Insurance Company of TennesseeSM and The
MEGA Life and Health Insurance Company.SM
-Original Message-
From: IBM Mainframe Discussion List
[mailto:IBM-MAIN@bama.ua.edu] On Behalf Of Don Thimsen
Sent: Thursday, April 07, 2011 9:23 AM
To: IBM-MAIN@bama.ua.edu
Subject: JES3 on a zPDT running zOS 1.12?
We're running two zPDT development systems with the IBM ADCD zOS 1.12
system. I'd like to convert one to a JES3 system for testing.
I found an older
webpage that documented the Steps to Configure JES3 on ADCD:
http://dtsc.dfw.ibm.com/MVSDS/'HTTPD2.ADCD.JES3.HTML($README)'
Note: You may need to cut and paste to view the link.
There were several errors in the setup guide, but were not
difficult to work
through. And all the JES3 data sets are available on the
ADCD system -they
reside on the ZCPRD2 volume. However, all the datasets were RACF
protected (according to the VTOC), but there were no entries
in the RACF
DB. I used the ADDSD command to set UACC(ALTER) for all the
JES3 data
sets.
During the IPL for JES3, the system prompts for the JES3 COLD
start, and
after selecting the cold start member it seems to hang:
09.06.37 *IAT3041 COLD START REQUIRED, ERROR READING
JESCKPNT
RECORD
09.06.37 IAT3011 SPECIFY JES3 START TYPE
09.06.37 *01 IAT3011 (C, L, H, HA, HR, HAR, W, WA,
WR, WAR, OR
CANCEL)
09.06.37 CMP001I DFSMS COMPRESSION SERVICES
AVAILABLE
09.06.38 IEF404I BLSJPRMI - ENDED - TIME=09.06.38
09.06.41 CSV210I LIBRARY LOOKASIDE INITIALIZED
09.06.44 IRA600I SRM CHANNEL DATA NOW AVAILABLE FOR
ALL SRM
FUNCTIONS
09.07.20 1,c
09.07.20 IEE600I REPLY TO 01 IS;C
09.07.20 IAT2063 ADCD UNABLE TO DETERMINE THE STATUS OF
JESXCF GROUP NAVAIL - NOT PRESENT IN COMPLEX STATUS RECORD
09.07.20 *02 IAT3012 SELECT JES3 INISH ORIGIN (N OR M=), AND
OPTIONAL EXIT PARM (,P=) OR CANCEL
09.07.56 2,m=ft
09.07.56 IEE600I REPLY TO 02 IS;M=FT
09.07.56 IAT6369 JES3 WAITING FOR CHECKPOINT DATA SET
RESERVE
- CHKPNT ,ZCPRD2,0A86.
09.07.57 CSV028I ABEND806-04 JOBNAME=IEESYSAS
STEPNAME=JES3AUX
09.07.57 IEF404I IEESYSAS - ENDED - TIME=09.07.57
09.08.36 IAT6397 FCT JSS (NODEVICE) HAS BEEN
DISPATCHED
CONTINUOUSLY FOR:
09.08.36 IAT6398 0 HOURS 00 MINUTES 30
SECONDS
09.08.37 IAT6415 at 0002BDE2 in LOADMOD=IATINIC ,
EPNAME=IATINIC ,EPADDR=00027E70,LEN=004190
09.08.37 *03 IAT6418 Reply 'JES3' to fail JES3
INITIALIZATION or 'nnn' to ask later
At this point, I'm stuck and have zero JES3 experience to
fall back on. I have
been reading the RedBook The ABCs of zOS System Programming
Volume 13,
and have successfully run the JES3INFT JES3 parms used for
the spool format
through the JES3 verify utility.
Re: JES3 on a zPDT running zOS 1.12?
Never mind. I totally misread your post. You're not having a RACF problem. the
S806-4 would likely mean some DSN is not on the LNKLST. I don't know JES3.
--
John McKown
Systems Engineer IV
IT
Administrative Services Group
HealthMarkets(r)
9151 Boulevard 26 * N. Richland Hills * TX 76010
(817) 255-3225 phone *
john.mck...@healthmarkets.com * www.HealthMarkets.com
Confidentiality Notice: This e-mail message may contain confidential or
proprietary information. If you are not the intended recipient, please contact
the sender by reply e-mail and destroy all copies of the original message.
HealthMarkets(r) is the brand name for products underwritten and issued by the
insurance subsidiaries of HealthMarkets, Inc. -The Chesapeake Life Insurance
Company(r), Mid-West National Life Insurance Company of TennesseeSM and The
MEGA Life and Health Insurance Company.SM
-Original Message-
From: IBM Mainframe Discussion List
[mailto:IBM-MAIN@bama.ua.edu] On Behalf Of McKown, John
Sent: Thursday, April 07, 2011 9:57 AM
To: IBM-MAIN@bama.ua.edu
Subject: Re: JES3 on a zPDT running zOS 1.12?
Can you IPL with JES2 and do some RACF work? If so, then I'd
do the following RACF commands on JES2 to update RACF. Or, if
you have the RACF subsystem active on your system, you could
possibley LOGON to the z/OS console and issue the RACF
commands from there using the RACF subsystem command prefix.
I can do this on our system. The RACF commands would be
something like:
ADDUSER JES3 NAME('JES3 STC') OWNER(SYS1) NOPASSWORD
DFLTGRP(SYS1) OPERATIONS
RDEF STARTED JES3.* STDATA(USER(JES3) GROUP(SYS1) TRACE(YES)
TRUSTED(YES))
You should then be able to S JES3 and it should have all the
RACF authority it needs. Likely it will have too much, but at
this point, I'd not really worry about it.
--
John McKown
Systems Engineer IV
IT
Administrative Services Group
HealthMarkets(r)
9151 Boulevard 26 * N. Richland Hills * TX 76010
(817) 255-3225 phone *
john.mck...@healthmarkets.com * www.HealthMarkets.com
Confidentiality Notice: This e-mail message may contain
confidential or proprietary information. If you are not the
intended recipient, please contact the sender by reply e-mail
and destroy all copies of the original message.
HealthMarkets(r) is the brand name for products underwritten
and issued by the insurance subsidiaries of HealthMarkets,
Inc. -The Chesapeake Life Insurance Company(r), Mid-West
National Life Insurance Company of TennesseeSM and The MEGA
Life and Health Insurance Company.SM
-Original Message-
From: IBM Mainframe Discussion List
[mailto:IBM-MAIN@bama.ua.edu] On Behalf Of Don Thimsen
Sent: Thursday, April 07, 2011 9:23 AM
To: IBM-MAIN@bama.ua.edu
Subject: JES3 on a zPDT running zOS 1.12?
We're running two zPDT development systems with the IBM
ADCD zOS 1.12
system. I'd like to convert one to a JES3 system for testing.
I found an older
webpage that documented the Steps to Configure JES3 on ADCD:
http://dtsc.dfw.ibm.com/MVSDS/'HTTPD2.ADCD.JES3.HTML($README)'
Note: You may need to cut and paste to view the link.
There were several errors in the setup guide, but were not
difficult to work
through. And all the JES3 data sets are available on the
ADCD system -they
reside on the ZCPRD2 volume. However, all the datasets were RACF
protected (according to the VTOC), but there were no entries
in the RACF
DB. I used the ADDSD command to set UACC(ALTER) for all the
JES3 data
sets.
During the IPL for JES3, the system prompts for the JES3 COLD
start, and
after selecting the cold start member it seems to hang:
09.06.37 *IAT3041 COLD START REQUIRED, ERROR READING
JESCKPNT
RECORD
09.06.37 IAT3011 SPECIFY JES3 START TYPE
09.06.37 *01 IAT3011 (C, L, H, HA, HR, HAR, W, WA,
WR, WAR, OR
CANCEL)
09.06.37 CMP001I DFSMS COMPRESSION SERVICES
AVAILABLE
09.06.38 IEF404I BLSJPRMI - ENDED - TIME=09.06.38
09.06.41 CSV210I LIBRARY LOOKASIDE INITIALIZED
09.06.44 IRA600I SRM CHANNEL DATA NOW AVAILABLE FOR
ALL SRM
FUNCTIONS
09.07.20 1,c
09.07.20 IEE600I REPLY TO 01 IS;C
09.07.20 IAT2063 ADCD UNABLE TO DETERMINE THE
STATUS OF
JESXCF GROUP NAVAIL - NOT PRESENT IN COMPLEX STATUS
RECORD
09.07.20 *02 IAT3012 SELECT JES3 INISH ORIGIN (N
OR M=), AND
OPTIONAL EXIT PARM (,P=) OR CANCEL
09.07.56 2,m=ft
Re: IPLed Volume- ISMF Panel
Hi All, She is asking about her SYSRES volume. Is anyone running with their SYSRES in an SMS Pool or Storage Group? Does IBM even support a SYSRES being in a SMS POOL? I was under the impression that it is not supported, but I could be wrong. Thanks...Guy M. Gates Jr. TTI Z/OS Systems Programmer II Email: guy.ga...@ttiinc.com Mainframe-inspired reliability for optimal system uptime. -SNIP - From: IBM Mainframe Discussion List [IBM-MAIN@bama.ua.edu mailto:IBM-MAIN@bama.ua.edu] On Behalf Of SAURABH KHANDELWAL [saurabh.khandel...@oracle.com mailto:saurabh.khandel...@oracle.com] Sent: 07 April 2011 09:36 To: IBM-MAIN@bama.ua.edu mailto:IBM-MAIN@bama.ua.edu Subject: IPLed Volume Hello, If I have two RES volume( example IPE100 and IPE101) in my system, then how can I find the detail about 1) from which RES volume my system is currently IPLed. 2) Is there any option in SMPE panel, by which we can come to know about volume detail, my target datasets are pointing to. Also in which volume my DDDEF are defined ( example SYSUT1 and SYSUT2 etc) Regards Saurabh -SNIP - -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: How/Why Is This Looping?
On Tue, 5 Apr 2011 08:06:50 -0500, Paul Gilmartin paulgboul...@aim.com wrote: Thanks for the research. The messages indicate that your HLQ is SMS managed. Mine isn't. I suspect that can make the difference. I did a test with non-SMS managed datasets. The end result is indeed not quite as expected, and the behaviour is quite surprising... Pre-SMS, I'd expect allocation to choose a different volume. It did allocate a new DUP1 on a different volume. This one did not get catalogued. That is expected. However, it was kept and that, I would not have expected. Indeed, the allocate statement specifies delete for the normal disposition, so it should really have deleted the one allocated on the other volume. The delete of the catalogued DUP1 failed and I don't quite understand why... The rename did not take place because the DUP1 already (still) exists, but that is to be expected when the delete has failed. The free failed as well, saying the file(atomic) is not allocated. Again, not what I expect, because the allocate has been successful... I got 256 times the IEF237I B68F ALLOCATED TO SYS00nnn message. Very strange, but not looping after all. Notice the first is for another volume (the one where the other DUP1 got created. All other are for the volume where the pre-existing DUP1 and DUP2 reside. I leave it up to you to further investigate. I include the full log of my job here. Cheers, Jantje. 1 J E S 2 J O B L O G -- S Y S T E M T E S T -- N O D E T M M E P R O D 0 17.11.43 JOB22420 THURSDAY, 07 APR 2011 17.11.43 JOB22420 IRR010I USERID H3091VA IS ASSIGNED TO THIS JOB. 17.11.43 JOB22420 ICH70001I H3091VA LAST ACCESS AT 17:10:25 ON THURSDAY, APRIL 7, 2011 17.11.43 JOB22420 #HASP373 JMO2659M STARTED - WLM INIT - SRVCLASS SC650 - SYS TEST 17.11.43 JOB22420 IEF403I JMO2659M - STARTED - TIME=17.11.43 17.11.45 JOB22420 - --TIMINGS (MINS.)--PAGING COUNTS--- 17.11.45 JOB22420 -JOBNAME STEPNAME PROCSTEPRC EXCPCPUSRB CLOCK SERV PG PAGE SWAPVIO SWAPS STEPNO 17.11.45 JOB22420 -JMO2659M RENAME 12282.00.00 .03 126K 0 0 0 0 0 1 17.11.45 JOB22420 -JMO2659M ENQ FLUSH 0.00.00 .00 0 0 0 0 0 0 2 17.11.45 JOB22420 IEF404I JMO2659M - ENDED - TIME=17.11.45 17.11.45 JOB22420 -JMO2659M ENDED. NAME- TOTAL CPU TIME= .00 TOTAL ELAPSED TIME= .03 17.11.45 JOB22420 #HASP395 JMO2659M ENDED 0-- JES2 JOB STATISTICS -- - 07 APR 2011 JOB EXECUTION DATE - 17 CARDS READ - 837 SYSOUT PRINT RECORDS -0 SYSOUT PUNCH RECORDS - 38 SYSOUT SPOOL KBYTES - 0.03 MINUTES EXECUTION TIME 1 //JMO2659M JOB 'NPAA.TMME.BATCH.COMPILE', JOB22420 // CLASS=N, // MSGCLASS=X,MSGLEVEL=(1,1), // NOTIFY=SYSUID //* //* //*.+|+|+|+|+|+|+|+| IEFC653I SUBSTITUTION JCL - 'NPAA.TMME.BATCH.COMPILE',CLASS=N,MSGCLASS=X,MSGLEVEL=(1,1),NOTIFY=H3091VA 2 //RENAME EXEC PGM=IKJEFT01 3 //SYSTSPRT DD SYSOUT=(,) 4 //SYSTSIN DD * //* 5 //ENQ EXEC PGM=IEFBR14,COND=(0,LE) 6 //X DD DISP=MOD,DSN='SYS2.BU.DUP1' ICH70001I H3091VA LAST ACCESS AT 17:10:25 ON THURSDAY, APRIL 7, 2011 IEF236I ALLOC. FOR JMO2659M RENAME IEF237I JES2 ALLOCATED TO
Re: ABARS QUESTION
Hi John, Check if the ABACKUP ACTIVITY log is available if not you could try running an ARECOVER with NOREPLACE. If you have parm FILTEROUTPUTDATASE coded in the aggregate set up for the ABACKUP. Good Luck --- On Tue, 4/5/11, John Dawes jhn_da...@yahoo.com.au wrote: From: John Dawes jhn_da...@yahoo.com.au Subject: ABARS QUESTION To: IBM-MAIN@bama.ua.edu Received: Tuesday, April 5, 2011, 10:18 AM G'Day To All, I would like to know if there is something similar to the TTOC function in ABARS? The reason I ask is that the tape is badly damaged and I would like to know what dsns are on the tape. This application hasn't been run for over 1 year. Cheers Thanks. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: ABARS QUESTION
Willie, Thanks for the suggestions. I am unable to execute the ARECOVER because the tape is damaged. The ACTIVITY log is no longer available. I checked the criteria in the ABACKUP and lo and behold their is the FILTEROUTPUTDATASET parm. I am presently checking the dsns associated with this aggregate. Thanks for the tip Cheers --- On Fri, 8/4/11, willie bunter williebun...@yahoo.com wrote: From: willie bunter williebun...@yahoo.com Subject: Re: ABARS QUESTION To: IBM-MAIN@bama.ua.edu Received: Friday, 8 April, 2011, 1:47 AM Hi John, Check if the ABACKUP ACTIVITY log is available if not you could try running an ARECOVER with NOREPLACE. If you have parm FILTEROUTPUTDATASE coded in the aggregate set up for the ABACKUP. Good Luck --- On Tue, 4/5/11, John Dawes jhn_da...@yahoo.com.au wrote: From: John Dawes jhn_da...@yahoo.com.au Subject: ABARS QUESTION To: IBM-MAIN@bama.ua.edu Received: Tuesday, April 5, 2011, 10:18 AM G'Day To All, I would like to know if there is something similar to the TTOC function in ABARS? The reason I ask is that the tape is badly damaged and I would like to know what dsns are on the tape. This application hasn't been run for over 1 year. Cheers Thanks. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: JES3 on a zPDT running zOS 1.12?
On Thu, 7 Apr 2011 09:23:22 -0500, Don Thimsen wrote: 09.07.57 CSV028I ABEND806-04 JOBNAME=IEESYSAS STEPNAME=JES3AUX Questions: 1) Is the reserve message on the checkpoint normal? Yes 2) JES3AUX used to be optional, but in zOS 1.12, JES3 always attempts the start. Is is required? And does it have it's own proc?? Yes. No. http://publibz.boulder.ibm.com/cgi-bin/bookmgr_OS390/BOOKS/iat2a690/2.7?DN=SA22-7549-09DT=20100701105608SHELF=ez2zo210CASE=PATH=/bookmgr/ Any suggestions would be appreciated, JES3AUX must be defined to RACF with the trusted attribute http://publibz.boulder.ibm.com/cgi-bin/bookmgr_OS390/BOOKS/iat2a690/3.4?SHELF=ez2zo210DT=20100701105608#HDRJESSTRT Check (again) LNKLST, LPALST, APF (SYS1.SIATxxx-Libs). IPL with CLPA is required (LPALST change) Norbert Friemel -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: How to start RMF Monitor III automatically after IPL the system.
On Thu, 7 Apr 2011 10:24:23 +0800, ibmnew ibm...@163.com wrote: Hi all We don't have SA. How to start RMF Monitor III automatically after IPL the system? Any suggestions is apprecited! So many ways. Long ago in our sandbox LPARs we just used a home grown program that issued a command after a delay time that was set in a parm. Those commands were all part of COMMNDxx in the parmlib concatenation. Long ago, I got rid of all that and use the COMMAND package from CBT file 19. Using that, there is a script started at IPL time with built in delays. After RMF is started, it delays 20 seconds and does the F RMF,START III command. Mark -- Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS mailto:m...@mzelden.com Mark's MVS Utilities: http://www.mzelden.com/mvsutil.html Systems Programming expert at http://expertanswercenter.techtarget.com/ *** Please note the new URL for Mark's MVS Utilities *** -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: IPLed Volume- ISMF Panel
Saurabh, You can see the storage group for a given volser in RMFPP reports and RMF II online displays. RMF II would be DEV V(smsvol). Ron -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of SAURABH KHANDELWAL Sent: Thursday, April 07, 2011 3:25 AM To: IBM-MAIN@bama.ua.edu Subject: Re: [IBM-MAIN] IPLed Volume- ISMF Panel Thanks Rob. I am able to see storage group name against volume serial number. Regards Saurabh Khandelwal On 4/7/2011 3:46 PM, Rob Scott wrote: D SMS,VOL(volser) -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: IPLed Volume- ISMF Panel
Thanks alot. I am able to see volume detail with storage group. Regards Saurabh Khandelwal On 4/7/2011 10:32 PM, Ron Hawkins wrote: Saurabh, You can see the storage group for a given volser in RMFPP reports and RMF II online displays. RMF II would be DEV V(smsvol). Ron -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of SAURABH KHANDELWAL Sent: Thursday, April 07, 2011 3:25 AM To: IBM-MAIN@bama.ua.edu Subject: Re: [IBM-MAIN] IPLed Volume- ISMF Panel Thanks Rob. I am able to see storage group name against volume serial number. Regards Saurabh Khandelwal On 4/7/2011 3:46 PM, Rob Scott wrote: D SMS,VOL(volser) -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
RSU Receive Error
Hello,
I am trying receiving RSU in to system. My unzip step
completed successfully, but in REC step I am getting below error for the
insufficient space.
But I am able to know, where exactly the system is getting
insufficient space.
Error :
IEW4000I FETCH FOR MODULE IDCAMS FROM DDNAME -LNKLST- FAILED BECAUSE
INSUFFICFFICIENT STORAGE WAS AVAILABLE.
CSV031I LIBRARY ACCESS FAILED FOR MODULE IDCAMS , RETURN CODE 24,
REASON CODE 26080021, DDNAME *LNKLST*
JCL used
//RSU1008C JOB (3623),'Saurabh',MSGCLASS=X,CLASS=A,
// NOTIFY=SYSUID
//UNZIPEXEC PGM=GIMUNZIP,PARM='HASH=NO'
//SYSUT3 DD UNIT=3390,SPACE=(CYL,(100,50))
//SYSUT4 DD UNIT=3390,SPACE=(CYL,(100,50))
//SMPOUT DD SYSOUT=*
//SYSPRINT DD SYSOUT=*
//SMPDIR DD PATH='/u/zos18',
//PATHDISP=KEEP
//SYSINDD DATA,DLM=$$
GIMUNZIP
ARCHDEF
name=SMPPTFIN/S0001.SHOPZ.S5192595.SMPMCS.pax.Z
volume=SPACD9
newname=SMPE.TEC1008.S5192595.SMPMCS
/ARCHDEF
ARCHDEF
name=SMPHOLD/S0002.SHOPZ.S5192595.SMPHOLD.pax.Z
volume=SPACD9
newname=SMPE.TEC1008.S5192595.SMPHOLD
/ARCHDEF
/GIMUNZIP
$$
//REC EXEC PGM=IKJEFT01,COND=(4,LT,UNZIP)
//SMPCSI DD DISP=SHR,
//DSN=SMPE.BIN8.GLOBAL.CSI
//SMPPTS DD DISP=OLD,
//DSN=SMPE.BIN8.SMPPTS
//SMPOUT DD SYSOUT=*
//SMPRPT DD SYSOUT=*
//SMPLIST DD SYSOUT=*
//SYSPRINT DD SYSOUT=*
//SMPLOG DD SYSOUT=*
//SMPLOGA DD DUMMY
//SYSUT1 DD UNIT=3390,SPACE=(CYL,(100,50)),DISP=(,DELETE)
//SYSUT2 DD UNIT=3390,SPACE=(CYL,(100,50)),DISP=(,DELETE)
//SYSUT3 DD UNIT=3390,SPACE=(CYL,(100,50)),DISP=(,DELETE)
//SYSUT4 DD UNIT=3390,SPACE=(CYL,(100,50)),DISP=(,DELETE)
//SMPCNTL DD DATA,DLM=$$
SETBOUNDARY (GLOBAL)
.
RECEIVE
.
$$
//SYSTSPRT DD SYSOUT=*
//SYSTSIN DD DATA,DLM=$$
ALLOC FI(SMPPTFIN) SHR DA('SMPE.TEC1008.S5192595.SMPMCS')
ALLOC FI(SMPHOLD) SHR DA('SMPE.TEC1008.S5192595.SMPHOLD')
CALL *(GIMSMP)
$$
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO
Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: RSU Receive Error
Specify a region size on the job card ..eg: REGION=8M
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of
SAURABH KHANDELWAL
Sent: Thursday, April 07, 2011 1:14 PM
To: IBM-MAIN@bama.ua.edu
Subject: RSU Receive Error
Hello,
I am trying receiving RSU in to system. My unzip step
completed successfully, but in REC step I am getting below error for the
insufficient space.
But I am able to know, where exactly the system is getting
insufficient space.
Error :
IEW4000I FETCH FOR MODULE IDCAMS FROM DDNAME -LNKLST- FAILED BECAUSE
INSUFFICFFICIENT STORAGE WAS AVAILABLE.
CSV031I LIBRARY ACCESS FAILED FOR MODULE IDCAMS , RETURN CODE 24,
REASON CODE 26080021, DDNAME *LNKLST*
JCL used
//RSU1008C JOB (3623),'Saurabh',MSGCLASS=X,CLASS=A,
// NOTIFY=SYSUID
//UNZIPEXEC PGM=GIMUNZIP,PARM='HASH=NO'
//SYSUT3 DD UNIT=3390,SPACE=(CYL,(100,50))
//SYSUT4 DD UNIT=3390,SPACE=(CYL,(100,50))
//SMPOUT DD SYSOUT=*
//SYSPRINT DD SYSOUT=*
//SMPDIR DD PATH='/u/zos18',
//PATHDISP=KEEP
//SYSINDD DATA,DLM=$$
GIMUNZIP
ARCHDEF
name=SMPPTFIN/S0001.SHOPZ.S5192595.SMPMCS.pax.Z
volume=SPACD9
newname=SMPE.TEC1008.S5192595.SMPMCS
/ARCHDEF
ARCHDEF
name=SMPHOLD/S0002.SHOPZ.S5192595.SMPHOLD.pax.Z
volume=SPACD9
newname=SMPE.TEC1008.S5192595.SMPHOLD
/ARCHDEF
/GIMUNZIP
$$
//REC EXEC PGM=IKJEFT01,COND=(4,LT,UNZIP)
//SMPCSI DD DISP=SHR,
//DSN=SMPE.BIN8.GLOBAL.CSI
//SMPPTS DD DISP=OLD,
//DSN=SMPE.BIN8.SMPPTS
//SMPOUT DD SYSOUT=*
//SMPRPT DD SYSOUT=*
//SMPLIST DD SYSOUT=*
//SYSPRINT DD SYSOUT=*
//SMPLOG DD SYSOUT=*
//SMPLOGA DD DUMMY
//SYSUT1 DD UNIT=3390,SPACE=(CYL,(100,50)),DISP=(,DELETE)
//SYSUT2 DD UNIT=3390,SPACE=(CYL,(100,50)),DISP=(,DELETE)
//SYSUT3 DD UNIT=3390,SPACE=(CYL,(100,50)),DISP=(,DELETE)
//SYSUT4 DD UNIT=3390,SPACE=(CYL,(100,50)),DISP=(,DELETE)
//SMPCNTL DD DATA,DLM=$$
SETBOUNDARY (GLOBAL)
.
RECEIVE
.
$$
//SYSTSPRT DD SYSOUT=*
//SYSTSIN DD DATA,DLM=$$
ALLOC FI(SMPPTFIN) SHR DA('SMPE.TEC1008.S5192595.SMPMCS')
ALLOC FI(SMPHOLD) SHR DA('SMPE.TEC1008.S5192595.SMPHOLD')
CALL *(GIMSMP)
$$
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO
Search the archives at http://bama.ua.edu/archives/ibm-main.html
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO
Search the archives at http://bama.ua.edu/archives/ibm-main.html
April 7, 1964 IBM Announces System 360 Computer Family
From http://www.computerhistory.org/tdih/ April 7, 1964 IBM Announces System 360 Computer Family IBM announces the release of its System 360 mainframe computer architecture--embodied in five new models--launching its most successful computer system of all time. Called the 360 because it was meant to address all possible sizes and types of customer with one unified software-compatible architecture, the 360 family of machines generated in excess of $100 billion in revenue for IBM. After five years of turbulent development, the Models 30, 40, 50, 60/62, and 70 were introduced along with 150 new supporting products, with IBM proudly claiming that software written for one model of System/360 could run on any other. This allowed customers to add or remove computing capacity without losing their investment in software. This had been a serious problem before the 360 with IBM alone having seven different, mutually-incompatible mainframe computer systems. The 360 architecture was the basis for all subsequent mainframe architectures developed at IBM, as well as at IBM's many plug-compatible imitators. Its standardization of interfaces and methods allowed other companies to carve out a niche in the 360-dominated computer ecosystem. Throughout most of the 1960s, the System/360's success gave IBM a 65% market share, prompting observers to term the industry Snow White (IBM) and the Seven Dwarfs. In 1965, the relative market shares were: 1. IBM: 65.3% 2. Sperry Rand (formerly Remington Rand): 12.1% 3. Control Data Corp.: 5.4% 4. Honeywell (formerly a division of Raytheon): 3.8% 5. Burroughs: 3.5% 6. General Electric: 3.4% 7. RCA: 2.9% 8. NCR (National Cash Register): 2.9% 9. The oft-forgotten eighth dwarf, Philco: 0.7% This email/fax message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution of this email/fax is prohibited. If you are not the intended recipient, please destroy all paper and electronic copies of the original message. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: ADRDSSU issue
VSAM data sets are required to be cataloged. If you look up the ADR468E message is says: If the REPLACE or REPLACEUNCONDITIONAL keyword was not specified, one of the following conditions applies: * If DELETE is specified and the entry name is a SYS1., page, or swap data set, the RENAMEUNCONDITIONAL or PROCESS(SYS1) subparameter was not specified. * If the entry name is a cluster name and DELETE was not specified: (1) the RENAMEUNCONDITIONAL subparameter was not specified or (2) the RECAT subparameter was not specified. * If the entry name is an alternate index or a user catalog name: (1) the DELETE subparameter was not specified or (2) the RENAMEUNCONDITIONAL subparameter was specified. * If the entry name is a user catalog name, INDDNAME or INDYNAM was specified. So you either need to specify the DELETE keyword if you are trying to move the data sets. If you are not trying to move the data sets and just want another copy then you need to specify the RECAT(catalogname) where the catalog catalogname is not in the standard order of search (no alias defined to the master catalog). Or if you are trying to just have a copy with a new name then you need to specify the RENAMEU(high_level_qualifier) to rename the data set's high level qualifier to which will then catalog the target VSAM data sets with the new name (other renaming options are available, look up the RENAMEU keyword in the DSS Storage Admin Guide). Some of your non-VSAM data sets may have been copied because they do not have the requirement to be cataloged. So then there is no conflict because they can be copied and leave the target data set uncataloged. BYPASSACS(**) and NSC will bypass the ACS routines and allow you to direct the datasets to a non-SMS volume. Keep in mind though that some data set types require SMS management. Hope that helps. Justin Eastman IBM DFSMSdss Development -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Accessing MF Data From Distributed Systems
I was looking only at your past point: .. convert each field to ASCII and appropriate numeric formats. How would you know where each field was and what it was? Without the orignal programs, I'd say just about impossible. -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of Ron Hawkins Sent: Wednesday, April 06, 2011 9:31 PM To: IBM-MAIN@bama.ua.edu Subject: Re: Accessing MF Data From Distributed Systems Hal I have to agree. The data written to the ATL on FICON channels will be CKD structure which is encapsulated into SCSI FBA at some point between the FICON interface and disk buffer. It's all SCSI after that. To read the data on the mainframe tapes from Fibre Channel the ATL vendor would likely have to provide an API that understands the proprietary encapsulation process in order to read the SCSI blocks, strip of the wrappers and reassemble the CKD blocks. Once the block is assembled it would have to be passed to another procedure to process the block based on its format (FB, VB, VBS. Etc), and convert each field to ASCII and appropriate numeric formats. The short answer is I think they are screwed unless they export the tapes to another compatible ATL and read them with FICON. Ron -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of Hal Merritt Sent: Wednesday, April 06, 2011 1:14 PM To: IBM-MAIN@bama.ua.edu Subject: Re: [IBM-MAIN] Accessing MF Data From Distributed Systems Short answer: most likely no. You might could 'access' the data, but would have little hope of making any sense of it. I'd take a look at a contingency contract with a service provider. And test the service, of course. -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of Dazzo, Matt Sent: Wednesday, April 06, 2011 2:08 PM To: IBM-MAIN@bama.ua.edu Subject: Accessing MF Data From Distributed Systems Luckily this required info is not for our shop, another MF is biting the dust here in the north east. The powers that be are concerned about accessing data that resides in a VTS/ATL device once the plug is pulled on the MF, should there be a need to. Is there any software/hardware product that provides the capability to access data in that device from a distributed platform, most likely HP or Linux. That's all the info I have for now. Anybody been there, done that? Thanks Matt -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html NOTICE: This electronic mail message and any files transmitted with it are intended exclusively for the individual or entity to which it is addressed. The message, together with any attachment, may contain confidential and/or privileged information. Any unauthorized review, use, printing, saving, copying, disclosure or distribution is strictly prohibited. If you have received this message in error, please immediately advise the sender by reply email and delete all copies. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html NOTICE: This electronic mail message and any files transmitted with it are intended exclusively for the individual or entity to which it is addressed. The message, together with any attachment, may contain confidential and/or privileged information. Any unauthorized review, use, printing, saving, copying, disclosure or distribution is strictly prohibited. If you have received this message in error, please immediately advise the sender by reply email and delete all copies. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Identifying Latest zOS Fixes
Hi all, our management have asked us to do a weekly review of new PTFs to ensure we apply any that are relevant. I realise there are flaws to this but who am I to argue. However I don't really know where to start - we've a mixture of zOS 1.9 (under extended support) and 1.11 systems - is there somewhere on IBM support that simply lists all the latest PTFs? I have tried using the My Notifications under Electronic Support but wasn't convinced this gave me a definitive list. Any advice on where to start on this would be appreciated. Thanks. Tony. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Identifying Latest zOS Fixes
Does the phrase 'Labors of Hercules' ring a bell with you? Seriously though, I'd just utilize the report missing fix functionally of SMP/E and use that information as the focus of your maintenance processes. Mark Jacobs On 04/07/11 13:42, Tony Lessells wrote: Hi all, our management have asked us to do a weekly review of new PTFs to ensure we apply any that are relevant. I realise there are flaws to this but who am I to argue. However I don't really know where to start - we've a mixture of zOS 1.9 (under extended support) and 1.11 systems - is there somewhere on IBM support that simply lists all the latest PTFs? I have tried using the My Notifications under Electronic Support but wasn't convinced this gave me a definitive list. Any advice on where to start on this would be appreciated. Thanks. Tony. -- Mark Jacobs Time Customer Service Tampa, FL A schlemiel is a waiter who spills hot soup, and the schlimazel is the one who gets it in his lap. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Identifying Latest zOS Fixes
Look at preventive service planning on ibmlink- Select maint search on left, then z/os, fill in system (z/os from menu) and year and put level https://www-304.ibm.com/ibmlink/psp/submit.wss -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of Tony Lessells Sent: Thursday, April 07, 2011 1:43 PM To: IBM-MAIN@bama.ua.edu Subject: Identifying Latest zOS Fixes Hi all, our management have asked us to do a weekly review of new PTFs to ensure we apply any that are relevant. I realise there are flaws to this but who am I to argue. However I don't really know where to start - we've a mixture of zOS 1.9 (under extended support) and 1.11 systems - is there somewhere on IBM support that simply lists all the latest PTFs? I have tried using the My Notifications under Electronic Support but wasn't convinced this gave me a definitive list. Any advice on where to start on this would be appreciated. Thanks. Tony. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: DATACLASS
No, the space parameter cannot tell the system the DSORG is PS. At best, it tells the system the DSORG is not PO. That still leaves PS, VS, IS, DA, etc. You have to use DSORG=PS because you wrote the ACS routine to check for that particular attribute. If you want to eliminate the need for the extra JCL, there are some options that you might be able to implement: Can you assign the data class to every dataset that matches the naming convention, regardless of DSORG? If so, simply remove the unnecessary check in the ACS routine. If not, change the check in the ACS routine from DSORG EQ PS to DSORG NE (PO, VS, IS, DA, etc) Barry Schwarz OS/390 System Programmer M/S 80-JE Phone: 253-657-5262 Fax: 253-657-8574 -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of ibmnew Sent: Wednesday, April 06, 2011 8:11 PM To: IBM-MAIN@bama.ua.edu Subject: Re: DATACLASS Hi Thanks your answers. I am sorry that I just came back by holiday Today I submit the following JCL: //ALOCHSKP EXEC PGM=IEFBR14 //MESSAGE DD DSN=ABSP.CEB.TEST9,DISP=(NEW,CATLG,DELETE), //UNIT=3390,SPACE=(4096,(10,10)), // DCB=(LRECL=300,BLKSIZE=27900,RECFM=FB) Below is the output: Data class . . . . . : DCSTD snip Then I submit the other JCL below: //ALOCHSKP EXEC PGM=IEFBR14 //MESSAGE DD DSN=ABSP.CEB.TEST8,DISP=(NEW,CATLG,DELETE), //UNIT=3390,SPACE=(4096,(10,10)),DSORG=PS, // DCB=(LRECL=300,BLKSIZE=27900,RECFM=FB) The output is below:Data class . . . . . : DCPS snip My question: When I allocate a dataset using PGM=IEFBR14 with SPACE=(4096,(10,10)), Could the parm of space ask system to allocate a PS dataset? Why do we must use DSORG=PS in the JCL? -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: RSU Receive Error
W dniu 2011-04-07 19:14, SAURABH KHANDELWAL pisze:
Hello,
I am trying receiving RSU in to system. My unzip step completed
successfully, but in REC step I am getting below error for the
insufficient space.
But I am able to know, where exactly the system is getting insufficient
space.
Error :
IEW4000I FETCH FOR MODULE IDCAMS FROM DDNAME -LNKLST- FAILED BECAUSE
INSUFFICFFICIENT STORAGE WAS AVAILABLE.
CSV031I LIBRARY ACCESS FAILED FOR MODULE IDCAMS , RETURN CODE 24, REASON
CODE 26080021, DDNAME *LNKLST*
JCL used
//RSU1008C JOB (3623),'Saurabh',MSGCLASS=X,CLASS=A,
// NOTIFY=SYSUID
//UNZIP EXEC PGM=GIMUNZIP,PARM='HASH=NO'
//SYSUT3 DD UNIT=3390,SPACE=(CYL,(100,50))
//SYSUT4 DD UNIT=3390,SPACE=(CYL,(100,50))
//SMPOUT DD SYSOUT=*
//SYSPRINT DD SYSOUT=*
//SMPDIR DD PATH='/u/zos18',
// PATHDISP=KEEP
//SYSIN DD DATA,DLM=$$
GIMUNZIP
ARCHDEF
name=SMPPTFIN/S0001.SHOPZ.S5192595.SMPMCS.pax.Z
volume=SPACD9
newname=SMPE.TEC1008.S5192595.SMPMCS
/ARCHDEF
ARCHDEF
name=SMPHOLD/S0002.SHOPZ.S5192595.SMPHOLD.pax.Z
volume=SPACD9
newname=SMPE.TEC1008.S5192595.SMPHOLD
/ARCHDEF
/GIMUNZIP
$$
//REC EXEC PGM=IKJEFT01,COND=(4,LT,UNZIP)
//SMPCSI DD DISP=SHR,
// DSN=SMPE.BIN8.GLOBAL.CSI
//SMPPTS DD DISP=OLD,
// DSN=SMPE.BIN8.SMPPTS
//SMPOUT DD SYSOUT=*
//SMPRPT DD SYSOUT=*
//SMPLIST DD SYSOUT=*
//SYSPRINT DD SYSOUT=*
//SMPLOG DD SYSOUT=*
//SMPLOGA DD DUMMY
//SYSUT1 DD UNIT=3390,SPACE=(CYL,(100,50)),DISP=(,DELETE)
//SYSUT2 DD UNIT=3390,SPACE=(CYL,(100,50)),DISP=(,DELETE)
//SYSUT3 DD UNIT=3390,SPACE=(CYL,(100,50)),DISP=(,DELETE)
//SYSUT4 DD UNIT=3390,SPACE=(CYL,(100,50)),DISP=(,DELETE)
//SMPCNTL DD DATA,DLM=$$
SET BOUNDARY (GLOBAL)
.
RECEIVE
.
$$
//SYSTSPRT DD SYSOUT=*
//SYSTSIN DD DATA,DLM=$$
ALLOC FI(SMPPTFIN) SHR DA('SMPE.TEC1008.S5192595.SMPMCS')
ALLOC FI(SMPHOLD) SHR DA('SMPE.TEC1008.S5192595.SMPHOLD')
CALL *(GIMSMP)
$$
Don't confuse space on disk with space in main memory (RAM).
The meesages above regard memory (RAM), not disk.
You should increase REGION for the step, i.e. by REGION=xxM to the UNZIP
EXEC statement. I would suggest you to be generous, i.e. specify 48M.
--
Radoslaw Skorupka
Lodz, Poland
--
Treść tej wiadomości może zawierać informacje prawnie chronione Banku
przeznaczone wyłącznie do użytku służbowego adresata. Odbiorcą może być jedynie
jej adresat z wyłączeniem dostępu osób trzecich. Jeżeli nie jesteś adresatem
niniejszej wiadomości lub pracownikiem upoważnionym do jej przekazania
adresatowi, informujemy, że jej rozpowszechnianie, kopiowanie, rozprowadzanie
lub inne działanie o podobnym charakterze jest prawnie zabronione i może być
karalne. Jeżeli otrzymałeś tę wiadomość omyłkowo, prosimy niezwłocznie
zawiadomić nadawcę wysyłając odpowiedź oraz trwale usunąć tę wiadomość
włączając w to wszelkie jej kopie wydrukowane lub zapisane na dysku.
This e-mail may contain legally privileged information of the Bank and is intended solely for business use of the addressee. This e-mail may only be received by the addressee and may not be disclosed to any third parties. If you are not the intended addressee of this e-mail or the employee authorised to forward it to the addressee, be advised that any dissemination, copying, distribution or any other similar activity is legally prohibited and may be punishable. If you received this e-mail by mistake please advise the sender immediately by using the reply facility in your e-mail software and delete permanently this e-mail including any copies of it either printed or saved to hard drive.
BRE Bank SA, 00-950 Warszawa, ul. Senatorska 18, tel. +48 (22) 829 00 00, fax
+48 (22) 829 00 33, e-mail: i...@brebank.pl
Sąd Rejonowy dla m. st. Warszawy XII Wydział Gospodarczy Krajowego Rejestru Sądowego, nr rejestru przedsiębiorców KRS 025237, NIP: 526-021-50-88.
Według stanu na dzień 01.01.2011 r. kapitał zakładowy BRE Banku SA (w całości wpłacony) wynosi 168.346.696 złotych.
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO
Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Accessing MF Data From Distributed Systems
W dniu 2011-04-07 19:38, Hal Merritt pisze: I was looking only at your past point: .. convert each field to ASCII and appropriate numeric formats. How would you know where each field was and what it was? Without the orignal programs, I'd say just about impossible. IMHO the problem is upside down. Author started from hardware, but he should start from application data. The goal is to have old application data available. Available means able to read *by existing* tools, with known format and content. Connecting hardware or interpreting CKD (it's tape, I know) data on PC could be a method. Much easier method is to export (ftp with EBCDIC-ASCII conversion) data to PC side. I bet that few commodity disks 2TB each would be enough to store the data. Last, but not least - the real issue is to identify relevant, or maybe_relevant or I_don't_think_so,_but_who_knows data. It should be subset of mainframe data, IMHO quite small one. Data selection require application knowledge... but even still having mainframe up and ready requires that! In other words, NO NEW KNOWLEDGE IS REQUIRED for the process. My €0.02 -- Radoslaw Skorupka Lodz, Poland -- Tre tej wiadomoci moe zawiera informacje prawnie chronione Banku przeznaczone wycznie do uytku subowego adresata. Odbiorc moe by jedynie jej adresat z wyczeniem dostpu osób trzecich. Jeeli nie jeste adresatem niniejszej wiadomoci lub pracownikiem upowanionym do jej przekazania adresatowi, informujemy, e jej rozpowszechnianie, kopiowanie, rozprowadzanie lub inne dziaanie o podobnym charakterze jest prawnie zabronione i moe by karalne. Jeeli otrzymae t wiadomo omykowo, prosimy niezwocznie zawiadomi nadawc wysyajc odpowied oraz trwale usun t wiadomo wczajc w to wszelkie jej kopie wydrukowane lub zapisane na dysku. This e-mail may contain legally privileged information of the Bank and is intended solely for business use of the addressee. This e-mail may only be received by the addressee and may not be disclosed to any third parties. If you are not the intended addressee of this e-mail or the employee authorised to forward it to the addressee, be advised that any dissemination, copying, distribution or any other similar activity is legally prohibited and may be punishable. If you received this e-mail by mistake please advise the sender immediately by using the reply facility in your e-mail software and delete permanently this e-mail including any copies of it either printed or saved to hard drive. BRE Bank SA, 00-950 Warszawa, ul. Senatorska 18, tel. +48 (22) 829 00 00, fax +48 (22) 829 00 33, e-mail: i...@brebank.pl Sd Rejonowy dla m. st. Warszawy XII Wydzia Gospodarczy Krajowego Rejestru Sdowego, nr rejestru przedsibiorców KRS 025237, NIP: 526-021-50-88. Wedug stanu na dzie 01.01.2011 r. kapita zakadowy BRE Banku SA (w caoci wpacony) wynosi 168.346.696 zotych. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Identifying Latest zOS Fixes
First off, you don't want to track 'PTFs' so much as APARs. Often a single APAR applies to multiple release levels, each of which will have its own unique PTF. If you track and order by APAR, you can submit essentially the same order for each level (CSI) that you support. As far as knowing what to track, I use... -- ASAP, a function of ServiceLink. Unfortunately I have not found a slick way to tell ASAP about the FMIDs I want to track, but once you get them all defined, you will get notified of important APARs for each tracked FMID. 'Important' generally means PE, HIPER, or ATTENTION. There are frequent, more or less daily, updates, but the number is not overwhelming. -- FIXCAT (fix category). This info comes along with HOLDDATA when you download 'ALL' data. A FIXCAT report tells you what important PTFs you're missing. 'Important' here is defined by each support organization, which supplies the HOLDDATA. If you report the results of these tracking mechanisms, you should satisfy this rather onerous demand. (Think pointy haired boss.) BTW any tracking method may have trouble with z/OS 1.9, which despite your contract is technically 'unsupported'. . . JO.Skip Robinson SCE Infrastructure Technology Services Electric Dragon Team Paddler SHARE MVS Program Co-Manager 626-302-7535 Office 323-715-0595 Mobile jo.skip.robin...@sce.com From: Barkow, Eileen ebar...@doitt.nyc.gov To: IBM-MAIN@bama.ua.edu Date: 04/07/2011 11:16 AM Subject:Re: Identifying Latest zOS Fixes Sent by:IBM Mainframe Discussion List IBM-MAIN@bama.ua.edu Look at preventive service planning on ibmlink- Select maint search on left, then z/os, fill in system (z/os from menu) and year and put level https://www-304.ibm.com/ibmlink/psp/submit.wss -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of Tony Lessells Sent: Thursday, April 07, 2011 1:43 PM To: IBM-MAIN@bama.ua.edu Subject: Identifying Latest zOS Fixes Hi all, our management have asked us to do a weekly review of new PTFs to ensure we apply any that are relevant. I realise there are flaws to this but who am I to argue. However I don't really know where to start - we've a mixture of zOS 1.9 (under extended support) and 1.11 systems - is there somewhere on IBM support that simply lists all the latest PTFs? I have tried using the My Notifications under Electronic Support but wasn't convinced this gave me a definitive list. Any advice on where to start on this would be appreciated. Thanks. Tony. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: JES3 on a zPDT running zOS 1.12?
Many Thanks. The problem turned out to be a LNKLST error. I've now IPL'd the system and performed a cold start with JES3. Don -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of Norbert Friemel Sent: Thursday, April 07, 2011 12:34 PM To: IBM-MAIN@bama.ua.edu Subject: Re: JES3 on a zPDT running zOS 1.12? On Thu, 7 Apr 2011 09:23:22 -0500, Don Thimsen wrote: 09.07.57 CSV028I ABEND806-04 JOBNAME=IEESYSAS STEPNAME=JES3AUX Questions: 1) Is the reserve message on the checkpoint normal? Yes 2) JES3AUX used to be optional, but in zOS 1.12, JES3 always attempts the start. Is is required? And does it have it's own proc?? Yes. No. http://publibz.boulder.ibm.com/cgi-bin/bookmgr_OS390/BOOKS/iat2a690/2.7?DN=SA22-7549-09DT=20100701105608SHELF=ez2zo210CASE=PATH=/bookmgr/ Any suggestions would be appreciated, JES3AUX must be defined to RACF with the trusted attribute http://publibz.boulder.ibm.com/cgi-bin/bookmgr_OS390/BOOKS/iat2a690/3.4?SHELF=ez2zo210DT=20100701105608#HDRJESSTRT Check (again) LNKLST, LPALST, APF (SYS1.SIATxxx-Libs). IPL with CLPA is required (LPALST change) Norbert Friemel -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Identifying Latest zOS Fixes
One way to accomplish this would be to order, using ShopzSeries, all new PTFs based off of a Service report of your SMP/E environment. You can find information on the ShopzSeries web-site about information on ordering using the report and how to create these reports. This will order the new PTFs based off your current SMP/E environment which can then be manually review for system impact and/or relavenance. As am sure you have already noted: The man power for this, depending on your shop's size, could be a full-time FTE or more. Craig Skip Robinson jo.skip.robin...@sce.com Sent by: IBM Mainframe Discussion List IBM-MAIN@bama.ua.edu 04/07/2011 03:10 PM Please respond to IBM Mainframe Discussion List IBM-MAIN@bama.ua.edu To IBM-MAIN@bama.ua.edu cc Subject Re: Identifying Latest zOS Fixes First off, you don't want to track 'PTFs' so much as APARs. Often a single APAR applies to multiple release levels, each of which will have its own unique PTF. If you track and order by APAR, you can submit essentially the same order for each level (CSI) that you support. As far as knowing what to track, I use... -- ASAP, a function of ServiceLink. Unfortunately I have not found a slick way to tell ASAP about the FMIDs I want to track, but once you get them all defined, you will get notified of important APARs for each tracked FMID. 'Important' generally means PE, HIPER, or ATTENTION. There are frequent, more or less daily, updates, but the number is not overwhelming. -- FIXCAT (fix category). This info comes along with HOLDDATA when you download 'ALL' data. A FIXCAT report tells you what important PTFs you're missing. 'Important' here is defined by each support organization, which supplies the HOLDDATA. If you report the results of these tracking mechanisms, you should satisfy this rather onerous demand. (Think pointy haired boss.) BTW any tracking method may have trouble with z/OS 1.9, which despite your contract is technically 'unsupported'. . . JO.Skip Robinson SCE Infrastructure Technology Services Electric Dragon Team Paddler SHARE MVS Program Co-Manager 626-302-7535 Office 323-715-0595 Mobile jo.skip.robin...@sce.com From: Barkow, Eileen ebar...@doitt.nyc.gov To: IBM-MAIN@bama.ua.edu Date: 04/07/2011 11:16 AM Subject:Re: Identifying Latest zOS Fixes Sent by:IBM Mainframe Discussion List IBM-MAIN@bama.ua.edu Look at preventive service planning on ibmlink- Select maint search on left, then z/os, fill in system (z/os from menu) and year and put level https://www-304.ibm.com/ibmlink/psp/submit.wss -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of Tony Lessells Sent: Thursday, April 07, 2011 1:43 PM To: IBM-MAIN@bama.ua.edu Subject: Identifying Latest zOS Fixes Hi all, our management have asked us to do a weekly review of new PTFs to ensure we apply any that are relevant. I realise there are flaws to this but who am I to argue. However I don't really know where to start - we've a mixture of zOS 1.9 (under extended support) and 1.11 systems - is there somewhere on IBM support that simply lists all the latest PTFs? I have tried using the My Notifications under Electronic Support but wasn't convinced this gave me a definitive list. Any advice on where to start on this would be appreciated. Thanks. Tony. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html ** This communication contains information which is confidential and may also be privileged. It is for the exclusive use of the intended recipient(s). If you are not the intended recipient(s), please note that any distribution, copying or use of this communication or the information in it is strictly prohibited. If you have received this communication in error, please notify the sender immediately and then destroy any copies of it. ** -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Identifying Latest zOS Fixes
I run a: RECEIVE SYSMODS HOLDDATA ORDER(ORDERSERVER(ORDSRVR) CONTENT(ALL)) DELETEPKG. And : REPORT ERRSYSMODS ZONES(IFCHECK) . REPORT MISSINGFIX FIXCAT(*) ZONES(IFCHECK) . Generally every day. That way I have all the fixes here. I don't review it everyday. I run an APPLY CHECK often enough that I know what needs to be held if I want to apply anything in response to a problem. As needed or a couple three times a year, I APPLY SOURCEID ( RSU* HIPER PRP IBM* ) I'm rethinking HIPER and maybe RSU*. Last time I ran this, I seem to have put a IOSAS real storage leak (or more likely invalid reporting of such) on. It was RSU and not HELD. Still, with this procedure, I rarely have a problem that causes difficulty. Dave Gibney Information Technology Services Washington State University -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of Craig Pace Sent: Thursday, April 07, 2011 2:35 PM To: IBM-MAIN@bama.ua.edu Subject: Re: Identifying Latest zOS Fixes One way to accomplish this would be to order, using ShopzSeries, all new PTFs based off of a Service report of your SMP/E environment. You can find information on the ShopzSeries web-site about information on ordering using the report and how to create these reports. This will order the new PTFs based off your current SMP/E environment which can then be manually review for system impact and/or relavenance. As am sure you have already noted: The man power for this, depending on your shop's size, could be a full-time FTE or more. Craig Skip Robinson jo.skip.robin...@sce.com Sent by: IBM Mainframe Discussion List IBM-MAIN@bama.ua.edu 04/07/2011 03:10 PM Please respond to IBM Mainframe Discussion List IBM-MAIN@bama.ua.edu To IBM-MAIN@bama.ua.edu cc Subject Re: Identifying Latest zOS Fixes First off, you don't want to track 'PTFs' so much as APARs. Often a single APAR applies to multiple release levels, each of which will have its own unique PTF. If you track and order by APAR, you can submit essentially the same order for each level (CSI) that you support. As far as knowing what to track, I use... -- ASAP, a function of ServiceLink. Unfortunately I have not found a slick way to tell ASAP about the FMIDs I want to track, but once you get them all defined, you will get notified of important APARs for each tracked FMID. 'Important' generally means PE, HIPER, or ATTENTION. There are frequent, more or less daily, updates, but the number is not overwhelming. -- FIXCAT (fix category). This info comes along with HOLDDATA when you download 'ALL' data. A FIXCAT report tells you what important PTFs you're missing. 'Important' here is defined by each support organization, which supplies the HOLDDATA. If you report the results of these tracking mechanisms, you should satisfy this rather onerous demand. (Think pointy haired boss.) BTW any tracking method may have trouble with z/OS 1.9, which despite your contract is technically 'unsupported'. . . JO.Skip Robinson SCE Infrastructure Technology Services Electric Dragon Team Paddler SHARE MVS Program Co-Manager 626-302-7535 Office 323-715-0595 Mobile jo.skip.robin...@sce.com From: Barkow, Eileen ebar...@doitt.nyc.gov To: IBM-MAIN@bama.ua.edu Date: 04/07/2011 11:16 AM Subject:Re: Identifying Latest zOS Fixes Sent by:IBM Mainframe Discussion List IBM-MAIN@bama.ua.edu Look at preventive service planning on ibmlink- Select maint search on left, then z/os, fill in system (z/os from menu) and year and put level https://www-304.ibm.com/ibmlink/psp/submit.wss -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of Tony Lessells Sent: Thursday, April 07, 2011 1:43 PM To: IBM-MAIN@bama.ua.edu Subject: Identifying Latest zOS Fixes Hi all, our management have asked us to do a weekly review of new PTFs to ensure we apply any that are relevant. I realise there are flaws to this but who am I to argue. However I don't really know where to start - we've a mixture of zOS 1.9 (under extended support) and 1.11 systems - is there somewhere on IBM support that simply lists all the latest PTFs? I have tried using the My Notifications under Electronic Support but wasn't convinced this gave me a definitive list. Any advice on where to start on this would be appreciated. Thanks. Tony. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html ** This communication
Re: Accessing MF Data From Distributed Systems
Radoslaw, Nice catch. I was reading ATL and thinking TMM. Ron Connecting hardware or interpreting CKD (it's tape, I know) data on PC could be a method. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: EMail attachments stopped working
Just to add to the fun: CSSMTP has a LRECL limit of 512 We went to zOS 1.11 and started using CSSMTP and after my programmers adjusted to the previous limit, they got hit with the new limit. No good deed goes unpunished. Now, really, I like the idea of CSSMTP, but if it is going to replace something, it should not change such things. From: Bryan Klimek klimek.br...@mayo.edu To: IBM-MAIN@bama.ua.edu Date: 01/18/2011 06:22 PM Subject:Re: EMail attachments stopped working Sent by:IBM Mainframe Discussion List IBM-MAIN@bama.ua.edu I know the original poster said they were using z/OS 1.8 and this does not address the original problem. But IBM now has a replacement SMTP client for z/OS. http://publib.boulder.ibm.com/infocenter/ieduasst/stgv1r0/topic/com.ibm.iea.commserv_v1/commserv/1.11z/appl/cssmtp.pdf We made the switch a couple months ago with very little effort. Bryan Klimek Mayo Clinic -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: RSU Receive Error
Space referred to is virtual storage. The explanation for message IEW4000I
makes that quite plain. Run the receive job with a larger region size. I
typically use REGION=0M for SMP/e jobs.
Ant.
Northern Territory Govt., Australia
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of
SAURABH KHANDELWAL
Sent: Friday, 8 April 2011 2:44 AM
To: IBM-MAIN@bama.ua.edu
Subject: RSU Receive Error
Hello,
I am trying receiving RSU in to system. My unzip step
completed successfully, but in REC step I am getting below error for the
insufficient space.
But I am able to know, where exactly the system is getting
insufficient space.
Error :
IEW4000I FETCH FOR MODULE IDCAMS FROM DDNAME -LNKLST- FAILED BECAUSE
INSUFFICFFICIENT STORAGE WAS AVAILABLE.
CSV031I LIBRARY ACCESS FAILED FOR MODULE IDCAMS , RETURN CODE 24,
REASON CODE 26080021, DDNAME *LNKLST*
JCL used
//RSU1008C JOB (3623),'Saurabh',MSGCLASS=X,CLASS=A,
// NOTIFY=SYSUID
//UNZIPEXEC PGM=GIMUNZIP,PARM='HASH=NO'
//SYSUT3 DD UNIT=3390,SPACE=(CYL,(100,50))
//SYSUT4 DD UNIT=3390,SPACE=(CYL,(100,50))
//SMPOUT DD SYSOUT=*
//SYSPRINT DD SYSOUT=*
//SMPDIR DD PATH='/u/zos18',
//PATHDISP=KEEP
//SYSINDD DATA,DLM=$$
GIMUNZIP
ARCHDEF
name=SMPPTFIN/S0001.SHOPZ.S5192595.SMPMCS.pax.Z
volume=SPACD9
newname=SMPE.TEC1008.S5192595.SMPMCS
/ARCHDEF
ARCHDEF
name=SMPHOLD/S0002.SHOPZ.S5192595.SMPHOLD.pax.Z
volume=SPACD9
newname=SMPE.TEC1008.S5192595.SMPHOLD
/ARCHDEF
/GIMUNZIP
$$
//REC EXEC PGM=IKJEFT01,COND=(4,LT,UNZIP)
//SMPCSI DD DISP=SHR,
//DSN=SMPE.BIN8.GLOBAL.CSI
//SMPPTS DD DISP=OLD,
//DSN=SMPE.BIN8.SMPPTS
//SMPOUT DD SYSOUT=*
//SMPRPT DD SYSOUT=*
//SMPLIST DD SYSOUT=*
//SYSPRINT DD SYSOUT=*
//SMPLOG DD SYSOUT=*
//SMPLOGA DD DUMMY
//SYSUT1 DD UNIT=3390,SPACE=(CYL,(100,50)),DISP=(,DELETE)
//SYSUT2 DD UNIT=3390,SPACE=(CYL,(100,50)),DISP=(,DELETE)
//SYSUT3 DD UNIT=3390,SPACE=(CYL,(100,50)),DISP=(,DELETE)
//SYSUT4 DD UNIT=3390,SPACE=(CYL,(100,50)),DISP=(,DELETE)
//SMPCNTL DD DATA,DLM=$$
SETBOUNDARY (GLOBAL)
.
RECEIVE
.
$$
//SYSTSPRT DD SYSOUT=*
//SYSTSIN DD DATA,DLM=$$
ALLOC FI(SMPPTFIN) SHR DA('SMPE.TEC1008.S5192595.SMPMCS')
ALLOC FI(SMPHOLD) SHR DA('SMPE.TEC1008.S5192595.SMPHOLD')
CALL *(GIMSMP)
$$
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO
Search the archives at http://bama.ua.edu/archives/ibm-main.html
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO
Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: IPLed Volume
I never IPL from the SMP/E target. I always clone to ZOSRx1 or ZOSRx2 where x is P for production and D for development (but is really the sandbox(s)). -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of Donald Likens Sent: Thursday, April 07, 2011 6:19 AM To: IBM-MAIN@bama.ua.edu Subject: Re: IPLed Volume I just have a suggestion... Create a batch procedure to copy your active IPL volume to your target IPL volume. The catalog entries are using indirect addressing either using symbolics or vol(**). Make sure all datasets that do not support indirect catalog entries are off the sysres (As I remember VSAM and zfs datasets do not support indirect catalog entries). In the procedure mass change all the dddefs in you target zone to replace the vol to point to your new target volume. If you have three sysres volumes... Target/backup/active you could continue working after a new sysres is implemented and still backoff. Also you could copy your target to the staging sysres (the previous backoff volume) avoiding mass change of smpe. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Multople zone in SMPE
-snip--- Can anybody help me, how to setup multiple zone to follow above concept. -unsnip What I always did was this: 1. Target zones was named to reflect the IPL folume set that it represented. For example, if my IPL volume was IPL001, that was the name of the target zone. 2. DLIB zones were named to reflect the first volume of the DLIB set. 3. The DLIB set for the IPL volumes were related in SMP/E. 4. ONLY one DLIB set was maintained. Once a new release appeared in shop, the old DLIB set was replaced and the new IPL set was defined. At that point, maintenance, other that critical stuff, was ceased on the existing IPL set. 5. The IPL set was defined using actual VOL-SER information, whereas the DLIB set was defined using a separate UCAT; HLQ's were changed such that the UCAT was used, rather than the MCAT. 6. In most cases, though not always, IPL set vol-ser information was altered to the new set using a ZONEEDIT under SMP/E. It may sound complicated but in our shop, no VOLSER is used twice in a release or between releases for an IPL set. Releawse 1.10 was named IP110a, IPL110B and IPL11C, and release 12 is being named IPL12A, IPL12B and IPL12C. VOLSER substitutions in PARMLIB and cataloging with VOL(**) DEVT(3390) save a LOT of pain. If a DSNAME is changed or added, we include both the new and old names in the catalog during the transition and our users are ABSOLUTELY FORBIDDEN from referring to datasets on the IPL volumes except by name. On rare occaissions, we'll install an alias for a dataset to make the transition between releases but since SYSTEMS controls the compile/link procs, we get those updated as soon as possible to reflect any changes and the dsname aliases go away. Our management is very inflexible; we are not allowed to make changes that require the applications staff to change anything. When System Determined Blocksize became availabe, the SYSTEMS staff had to update all the procs, both ours and applications', to take advantage of this. I know, parts of this are short-sighted and overly stupid, but that's the way it works here. Rick -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: REXX INCLUDE ?
But only the *compiler*. If you don't have the compiler, or you prefer to test interpreted and then compile, you will need to write your own program to process a Rexx member and expand the %INCLUDEs. Grr. Charles -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of Sambataro, Anthony (NIH/CIT) [E] Sent: Wednesday, April 06, 2011 4:01 AM To: IBM-MAIN@bama.ua.edu Subject: Re: REXX INCLUDE ? The REXX compiler offers an %INCLUDE statement. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Multople zone in SMPE
Assuming your target/dlib zones are in a separate VSAM datasets: 1) Copy/rename them using DF/DSS. You'll also need to make copies of the related SMP/E datasets (ie, SMPLTS, SMPMTS, SMPSCDS, SMPSTS, maybe SMPLOG and SMPLOGA depending on how you are set up) and the target and distribution libraries. 2) Rename the new zones using SMP/e: SET BDY(GLOBAL). ZONERENAME (old target zone name) TO(new target zone name) NEWDATASET(new target zone VSAM dataset name). ZONERENAME (old dlib zone name) TO(new dlib zone name) NEWDATASET(new dlib zone VSAM dataset name). 3) Link the new target/dlib zones SET BDY(new target zone name). UCLIN. REP TZONE(new target zone name) RELATED(new dlib zone name) ZDESC(new description if needed). ENDUCL. SET BDY(new dlib zone name). UCLIN. REP DZONE(new dlib zone name) RELATED(new target zone name) ZDESC(new description if needed). ENDUCL. 4) Update the DDDEFs in the new zones to point to the new datasets that the copied SMP/e environment reflects. Use SMP/e ZONEEDIT DDDEF. Don't forget the new SMP* files. SET BDY(new target zone name). /* For IPL-resident files */ ZONEEDIT DDDEF. IF (VOLUME=old IPL volser). CHANGE VOLUME(*,new IPL volser). ENDZONEEDIT. /* For other (non-IPL volume files */ ZONEEDIT DDDEF. CHANGE DATASET(old dsn prefix*,new dsn prefix*). ENDZONEEDIT. SET BDY(new dlib zone name). ZONEEDIT DDDEF. CHANGE DATASET(old dsn prefix*,new DSN prefix*). ENDZONEEDIT. For a simple example, if you copied you dlib's from, say, SYS1.A* to SYS1.MAINT.A* and copied the SMPLTS, SMPMTS etc. from SMPE.SMP* to SMPE.MAINT.SMP* then above for the dlib zone would look like: SET BDY(new dlib zone name). ZONEEDIT DDDEF. CHANGE DATASET(SYS1.A*,SYS1.MAINT.A*). CHANGE DATASET(SMPE.SMP*,SMPE.MAINT.SMP*). ENDZONEEDIT. You'll also need to cater for OMVS pathnames. The root filesystem for the maintenance system (and any ancilliary filesystems) would be mounted under a 'service' mountpoint on the system installing maintenance, usually called /service. So you'll need to ZONEEDIT DDDEF PATH as well: ZONEEDIT DDDEF. CHANGE PATH(*,'/service'*). ENDZONEEDIT. Cheers, Ant. Northern Territory Govt., Australia -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of SAURABH KHANDELWAL Sent: Thursday, 7 April 2011 7:59 PM To: IBM-MAIN@bama.ua.edu Subject: Multople zone in SMPE Hello, By the time of server pac installation, we just defined one target and one distribution zone. But if we create two RES volume, for applying maintenance then in this we case we would require two target and distribution zone. And in this way we always apply maintenance not on running RES volume. We always do on another RES volume. Can anybody help me, how to setup multiple zone to follow above concept. Regards Saurabh Khandelwal -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: REXX INCLUDE ?
On Thu, 7 Apr 2011 16:58:40 -0700, Charles Mills wrote: But only the *compiler*. If you don't have the compiler, or you prefer to test interpreted and then compile, you will need to write your own program to process a Rexx member and expand the %INCLUDEs. Grr. Grr (in harmony). Sometimes, when I'm testing an EXEC in instream data in a batch job, I concatenate my subroutine menbers in DD statements after the main code. -- gil -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
