Re: [LegacyUG] Still using 7,5 for some files
The saga continues. I tried again with the same result- a part file that wouldn't open. I then went on with some other work and went to the desk top and there was the Legacy.exe file I opened it and brought up the sample file I went to Help - About - General it was V 282 I tried to open anthe file and got this message */Error deleting Temple. Error 3167: Record is deleted Would you like to try it again /*_* I clicked Yes and no reponse*_*/ /*Anne */ /* On 11/03/2014 2:51 PM, Ron Taylor wrote: The .part extension will be changed to .exe when the entire file has been downloaded. If the download fails, then the .part extension will still be on the filename. It means that the download is partial. Delete it and try to get the full download. A partial download will not work. By the way, the size of 30mb is a very old message. I have suggested that Millennia update it. Version 7.5.0.278 download is about 47.5mb. The download still works for 7.5 as I have done it recently. The last release to the test group before version 8 was released was 7.5.0.282. There was some expectation that another release would be posted when all the Legacy Family Tree issues with Family Search were resolved so that 7.5 would interface similar to version 8. Without official word from Millennia, it may remain just a rumor. Ron Taylor On Monday, March 10, 2014 8:48 PM, Anne Hollingshead holl...@melbpc.org.au wrote: Thanks Wendy. I had tried several times. This time I closed everything down but I still got the message /The process cannot access the file because it is being used by another process. Legacy along with all files except Firefox is closed / /I am sorry but this is very frustrating/ Anne On 11/03/2014 11:20 AM, Wendy Howard wrote: Hi Anne, I'm not an expert on these things, but it sounds to me like your download got interrupted somehow and didn't finish. I've downloaded a copy from that page just now and it completed properly. If I were you, I would give it another try. Hope this helps. :-) Wendy Anne Hollingshead said the following on 11/03/2014 12:11 p.m.: I clicked on on the link /The final release of Legacy 7.5 was Version 7.5.0.278 (Build Date 12 November 2013)// // //Download Full Setup (30 MB)// //Click on Save in download dialog box to save the setup file to disk, then run the Legacy7Setup.exe:// //Legacy7Setup.exe / I got a file named Legacy7Setup.exe.part which would not open. Anne On 11/03/2014 8:16 AM, Wendy Howard wrote: Hi Marie, On the download page on the Legacy web site there is a Frequently Asked Questions section on the right of the page near the top. There, you will find a link for earlier versions of Legacy. That takes you to http://legacyfamilytree.com/helpDownloadVersion7.asp where - despite the URL's name - you will find links to download six past versions. You can choose to download v7.5 from there if that is what you want. Legacy v8 installs itself in a different place to past versions. This makes it very easy to install it and have a look around while still using v7 (or earlier) for your main data file maintenance, if you want to do that. As I said in another post just yesterday, be aware that v8 will want to convert any older data file to its format, so make sure you use a copy of your data file for this purpose, or use the sample data file provided with the program to look around the program. Hope this helps. :-) Wendy Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp http://www.legacyfamilytree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support:http://www.LegacyFamilyTree.com/Help.asp http://www.legacyfamilytree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com http://news.legacyfamilytree.com/). To unsubscribe:http://www.LegacyFamilyTree.com/LegacyLists.asp http://www.legacyfamilytree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009:
[LegacyUG] New Legacy User Group - Mess, AZ
We have started a new LUG in Mesa, AZ. We will be having our second meeting on March 20 at 6pm. We are meeting at the LDS Chapel at 1415 E. Southern Ave. This month will be reviewing sources and how to enter them. If you have any questions please email me directly. Thanks, Richard Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] LEGACY 8
All programs have 'unresolved issues'. :-) It is entirely your choice whether you download Legacy v8 and start looking around now, or wait for a later date to do so. If you're undecided about spending money on an upgrade, use it in the free Standard mode for a while before making up your mind. As has already been said several times now (most recently earlier today), Legacy v8 installs itself in a different location to previous versions, so it is possible to have both v8 and whatever you're using now (v7 in your case) running at the same time. Just don't try to open the same file in both programs - make a copy to open in v8 so you can still open the original in the older version. Kind Regards, Wendy Sid Ross said the following on 11/03/2014 4:38 p.m.: I am currently using legacy 7.5 and was considering an upgrade to Legacy 8. It would appear that v8 still has a lot of unresolved issues. Should I go ahead and upgrade or wait several more months be fore transitioning to v8. Also with respect to the manual, I agree that a PDF corrections update should be made available much the same way as the military updates it's technical manuals. Sid Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] LEGACY 8
On 11 Mar 2014 05:38, Sid Ross wrote: Should I go ahead and upgrade or wait several more months be fore transitioning to v8. First of all, an 'upgrade' implies a replacement of what you've already got. Because it can be installed alongside Legacy 7.5, Legacy 8 should be regarded as a separate product. So, I would download the standard version for now and get to grips with it using copies of your own data. Then, when you're satisfied that it's stable enough for your use, purchase the upgrade and unleash the premium features. I would still not make Legacy 8 my main program until I was happy that the premium feature were at least as effective as their 7.5 counterparts. Only then would I move across to using Legacy 8 full time, but I'd still keep 7.5 around in case of problems. -- Regards, Mike Fry Johannesburg (g) Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Still using 7,5 for some files
Have you rebooted your computer during all of this? If you haven't, give it a try. :-) Wendy Anne Hollingshead said the following on 11/03/2014 3:46 p.m.: Thanks Wendy. I had tried several times. This time I closed everything down but I still got the message /The process cannot access the file because it is being used by another process. Legacy along with all files except Firefox is closed / /I am sorry but this is very frustrating/ Anne On 11/03/2014 11:20 AM, Wendy Howard wrote: Hi Anne, I'm not an expert on these things, but it sounds to me like your download got interrupted somehow and didn't finish. I've downloaded a copy from that page just now and it completed properly. If I were you, I would give it another try. Hope this helps. :-) Wendy Anne Hollingshead said the following on 11/03/2014 12:11 p.m.: I clicked on on the link /The final release of Legacy 7.5 was Version 7.5.0.278 (Build Date 12 November 2013)// // //Download Full Setup (30 MB)// //Click on Save in download dialog box to save the setup file to disk, then run the Legacy7Setup.exe:// //Legacy7Setup.exe / I got a file named Legacy7Setup.exe.part which would not open. Anne On 11/03/2014 8:16 AM, Wendy Howard wrote: Hi Marie, On the download page on the Legacy web site there is a Frequently Asked Questions section on the right of the page near the top. There, you will find a link for earlier versions of Legacy. That takes you to http://legacyfamilytree.com/helpDownloadVersion7.asp where - despite the URL's name - you will find links to download six past versions. You can choose to download v7.5 from there if that is what you want. Legacy v8 installs itself in a different place to past versions. This makes it very easy to install it and have a look around while still using v7 (or earlier) for your main data file maintenance, if you want to do that. As I said in another post just yesterday, be aware that v8 will want to convert any older data file to its format, so make sure you use a copy of your data file for this purpose, or use the sample data file provided with the program to look around the program. Hope this helps. :-) Wendy Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Still using 7,5 for some files
On 11 Mar 2014 08:53, Anne Hollingshead wrote: The saga continues. I tried again with the same result- a part file that wouldn't open. I then went on with some other work and went to the desk top and there was the Legacy.exe file I opened it and brought up the sample file I went to Help - About - General it was V 282 If you've only got the .PART file, then the download has failed or is in progress. Where is Firefox putting downloaded files when it's finished? Where is Firefox putting the download whilst it's in progress? If all you see is the .PART file, don't be impatient. Wait for it to finish. Even with a super-fast DSL line, downloading 48683kb is going to take more than a few minutes. Check the little Firefox downloads icon (the downwards-pointing arrow) for progress. -- Regards, Mike Fry Johannesburg (g) Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] LEGACY 8
The Military has bottomless pockets (i.e. Taxpayers) - I'm very sure that Legacy (Millennia Corp) does not have that same luxury. Ron Bernier Woonsocket, RI On Mon, Mar 10, 2014 at 11:38 PM, Sid Ross sidros...@gmail.com wrote: I am currently using legacy 7.5 and was considering an upgrade to Legacy 8. It would appear that v8 still has a lot of unresolved issues. Should I go ahead and upgrade or wait several more months be fore transitioning to v8. Also with respect to the manual, I agree that a PDF corrections update should be made available much the same way as the military updates it's technical manuals. Sid Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] LEGACY 8
On 11 Mar 2014 09:56, Ron Bernier wrote: The Military has bottomless pockets (i.e. Taxpayers) - I'm very sure that Legacy (Millennia Corp) does not have that same luxury. Millennia could adopt a slightly more user-friendly policy. a) Issue hardcopy at time of initial release and when a reprint is indicated b) Issue PDF copy at initial release and at each major e.g. 8.1 release c) Issue an Errata file (RTF or DOC or...) and include in each version. This last could be installed along with the program and accessed from the Help menu. -- Regards, Mike Fry Johannesburg (g) Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] LEGACY 8
Sid Ross wrote: Also with respect to the manual, I agree that a PDF corrections update should be made available much the same way as the military updates it's technical manuals. When last I worked w/ the US military, those manuals were in ring-binders; updates were individual sheets one was expected to switch out manually. PITA of truly colossal proportions. Cheryl Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
RE: [LegacyUG] Still using 7,5 for some files
Anne, You really need to send this in as a support ticket. Michele Technical Support mailto:mich...@legacyfamilytree.com mich...@legacyfamilytree.com http://www.LegacyFamilyTree.com www.LegacyFamilyTree.com From: Anne Hollingshead [mailto:holl...@melbpc.org.au] Sent: Tuesday, March 11, 2014 2:53 AM To: legacyusergroup@LegacyUsers.com Subject: Re: [LegacyUG] Still using 7,5 for some files The saga continues. I tried again with the same result- a part file that wouldn't open. I then went on with some other work and went to the desk top and there was the Legacy.exe file I opened it and brought up the sample file I went to Help - About - General it was V 282 I tried to open anthe file and got this message Error deleting Temple. Error 3167: Record is deleted Would you like to try it again I clicked Yes and no reponse Anne On 11/03/2014 2:51 PM, Ron Taylor wrote: The .part extension will be changed to .exe when the entire file has been downloaded. If the download fails, then the .part extension will still be on the filename. It means that the download is partial. Delete it and try to get the full download. A partial download will not work. By the way, the size of 30mb is a very old message. I have suggested that Millennia update it. Version 7.5.0.278 download is about 47.5mb. The download still works for 7.5 as I have done it recently. The last release to the test group before version 8 was released was 7.5.0.282. There was some expectation that another release would be posted when all the Legacy Family Tree issues with Family Search were resolved so that 7.5 would interface similar to version 8. Without official word from Millennia, it may remain just a rumor. Ron Taylor On Monday, March 10, 2014 8:48 PM, Anne Hollingshead mailto:holl...@melbpc.org.au holl...@melbpc.org.au wrote: Thanks Wendy. I had tried several times. This time I closed everything down but I still got the message The process cannot access the file because it is being used by another process. Legacy along with all files except Firefox is closed I am sorry but this is very frustrating Anne On 11/03/2014 11:20 AM, Wendy Howard wrote: Hi Anne, I'm not an expert on these things, but it sounds to me like your download got interrupted somehow and didn't finish. I've downloaded a copy from that page just now and it completed properly. If I were you, I would give it another try. Hope this helps. :-) Wendy Anne Hollingshead said the following on 11/03/2014 12:11 p.m.: I clicked on on the link /The final release of Legacy 7.5 was Version 7.5.0.278 (Build Date 12 November 2013)// // //Download Full Setup (30 MB)// //Click on Save in download dialog box to save the setup file to disk, then run the Legacy7Setup.exe:// //Legacy7Setup.exe / I got a file named Legacy7Setup.exe.part which would not open. Anne On 11/03/2014 8:16 AM, Wendy Howard wrote: Hi Marie, On the download page on the Legacy web site there is a Frequently Asked Questions section on the right of the page near the top. There, you will find a link for earlier versions of Legacy. That takes you to http://legacyfamilytree.com/helpDownloadVersion7.asp where - despite the URL's name - you will find links to download six past versions. You can choose to download v7.5 from there if that is what you want. Legacy v8 installs itself in a different place to past versions. This makes it very easy to install it and have a look around while still using v7 (or earlier) for your main data file maintenance, if you want to do that. As I said in another post just yesterday, be aware that v8 will want to convert any older data file to its format, so make sure you use a copy of your data file for this purpose, or use the sample data file provided with the program to look around the program. Hope this helps. :-) Wendy Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com http://news.legacyfamilytree.com/ ). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe:
RE: [LegacyUG] problem with Legacy 8, build 412 and up
If you did a Set Direct Line As Preferred, then those names will be bold. Seems to me I’ve seen other messages commenting that there is no way to undo this. You might be able to get around it by creating a new unlinked dummy person, do a Set Direct Line as Preferred on that person, and then delete it. From: Chuck Sechler [mailto:csech...@att.net] Sent: Thursday, March 06, 2014 6:18 PM To: legacyusergroup@LegacyUsers.com Subject: [LegacyUG] problem with Legacy 8, build 412 and up I believe that since I updated to build 412 I have started seeing Children in the Family file listed with bolded names. I have been all through option 3.8 in the customization to no avail. I set Use + at the end of name to indicate spouses and continued lines. the other 3.8 options are unchecked, which can cause bolding. However, some of the names in the Children lists still come out bolded, with no seeming rhyme or reason as to why they do. I have wiped out version 8 and reinstalled , to no avail. I have tried resetting options to Legacy default, to no avail. I do not believe this was occurring before build 412. Any ideas? Thanks. Chuck. Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
RE: [LegacyUG] Problem with Family Group Report
There’s a bug in the [FirstHeShe] function. From: Diane [mailto:manley1...@gmail.com] Sent: Sunday, March 09, 2014 5:30 PM To: legacyusergroup@LegacyUsers.com Subject: RE: [LegacyUG] Problem with Family Group Report Charles; I have had the same issue and reported it; however, I haven't heard any further about the status. Like you, I've tried doing a restart and a check/repair. I've noticed the incorrect names pulled into shared events. Diane From: Charles Apple [mailto:apple1...@centurylink.net] Sent: Sunday, March 09, 2014 1:30 PM To: legacyusergroup@LegacyUsers.com Subject: [LegacyUG] Problem with Family Group Report The event sentence in the Family Group Report is displaying the wrong person. I ran Check/Repair, checked the event sentence definition, restarted Legacy 8 (latest release), to no avail. The problem persists, and nothing seems to correct it. First problem: My Citizenship event definition reads as follows [FirstHeShe] was automatically granted [Desc] [onDate] [inPlace].[Notes] [Sources] which should read as “John was automatically granted United States Citizenship at the moment of his birth on 9 May 1949 in Cleveland, Cuyahoga County, Ohio.” Instead of displaying this way, the [FirstHeShe] placeholder picks up his mother’s name, instead of his. Second problem: While checking the event sentence definitions I also noticed that all of the [sources] and [notes] were missing from the event sentence definitions even though the sources and notes displayed correctly in the Report. Is there a setting that I have missed? Any assistance in resolving these two issues would be greatly appreciated, Charles Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
[LegacyUG] Master sources
Hi - a simple question but one which confounds me at the moment. I have to create numerous new sources which are similar (Single county parish registers where only the name of the parish is different but the origin of the source is different). Is it possible to copy a master source? Then I could just change the name and origin. Graham Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
RE: [LegacyUG] Master sources
Yes, I do it all the time but you need to be VERY careful when you do this. Bring up the source you want to use but alter. Click Edit over on the right side. Make the changes you need. Now click Save. Make sure that you select 2. APPLY THE CHANGES TO A NEW COPY OF THIS MASTER SOURCE. You don't want to accidentally pick the first option or you will overwrite the one you already have and then you will have a mess. Make sure that you don't forget to change the NAME of the source too. Michele Technical Support mich...@legacyfamilytree.com www.LegacyFamilyTree.com -Original Message- From: Graham Love [mailto:love-fam...@blueyonder.co.uk] Sent: Tuesday, March 11, 2014 11:11 AM To: legacyusergroup@LegacyUsers.com Subject: [LegacyUG] Master sources Hi - a simple question but one which confounds me at the moment. I have to create numerous new sources which are similar (Single county parish registers where only the name of the parish is different but the origin of the source is different). Is it possible to copy a master source? Then I could just change the name and origin. Graham Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
RE: [LegacyUG] Problem with Family Group Report
Thank you Diane and Kurt, I have also sent in a bug report, however, I have not heard anything further. For me, this is a critical issue since I try to reconstruct the events of my ancestors lives, and if I cannot rely on the Event Sentence Definitions, reports will be subject to error. Charles From: Kurt Kneeland [mailto:kurt-kneel...@sbcglobal.net] Sent: Tuesday, March 11, 2014 10:56 AM To: legacyusergroup@LegacyUsers.com Subject: RE: [LegacyUG] Problem with Family Group Report There’s a bug in the [FirstHeShe] function. From: Diane [mailto:manley1...@gmail.com] Sent: Sunday, March 09, 2014 5:30 PM To: legacyusergroup@LegacyUsers.com Subject: RE: [LegacyUG] Problem with Family Group Report Charles; I have had the same issue and reported it; however, I haven't heard any further about the status. Like you, I've tried doing a restart and a check/repair. I've noticed the incorrect names pulled into shared events. Diane Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Legacy failing to recognize my email address
Two things I haven't been able to do thus far: download the latest build for Legacy 8 and sign in to a webinar I had registered for but didn't see at the time. Pat On Mon, Mar 10, 2014 at 8:37 PM, Wendy Howard wendy.how...@gmail.comwrote: What do you mean? Where exactly are you trying to enter your address? Wendy Pat Hickin said the following on 11/03/2014 1:25 p.m.: Legacy is failing to recognize my email address (i.e, this address. What can I do?? Pat Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
RE: [LegacyUG] Question - Cemetery or Tombstone as the source?
Slightly tongue in cheek but my favourite quote at the moment is from Geoff - 'What have you got in your hand?'. The answer in this case is a photograph so that should be the source and the source detail self evident. Cemetery burial records would be another source. Just a thought. Graham From: Poppke Genealogy [mailto:ad...@poppkegenealogy.com] Sent: 11 March 2014 00:05 To: legacyusergroup@LegacyUsers.com Subject: [LegacyUG] Question - Cemetery or Tombstone as the source? Hello, I photograph during cemetery trips and use the images as a source without transcription. I'm planning on listing the cemetery as the source, and record tombstone details as the various source details. Are there pros and cons to doing it this way? Would like some comments before I start. Thanks, Ted Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Legacy failing to recognize my email address
Pat, Your email address should have nothing to do with downloading updates. You do not even need to provide an email address to download updates. If you are getting an invalid email address notice when trying to log into the Family Tree Webinars site, that means that the email address you are trying to log in with is not the same email address you originally registered with. On Tuesday, March 11, 2014, Pat Hickin pph...@gmail.com wrote: Two things I haven't been able to do thus far: download the latest build for Legacy 8 and sign in to a webinar I had registered for but didn't see at the time. Pat On Mon, Mar 10, 2014 at 8:37 PM, Wendy Howard wendy.how...@gmail.comjavascript:_e(%7B%7D,'cvml','wendy.how...@gmail.com'); wrote: What do you mean? Where exactly are you trying to enter your address? Wendy Pat Hickin said the following on 11/03/2014 1:25 p.m.: Legacy is failing to recognize my email address (i.e, this address. What can I do?? Pat Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp -- Ron Bernier, Woonsocket, RI Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Master sources
On 11/03/2014 15:17, Michele/Support wrote: Yes, I do it all the time but you need to be VERY careful when you do this. Bring up the source you want to use but alter. Click Edit over on the right side. Make the changes you need. Now click Save. Make sure that you select 2. APPLY THE CHANGES TO A NEW COPY OF THIS MASTER SOURCE. You don't want to accidentally pick the first option or you will overwrite the one you already have and then you will have a mess. Make sure that you don't forget to change the NAME of the source too. What I try and remember to do, just in case I slip up later on, is change ONLY the name of the Source and save it. Then, if I've saved it correctly as a new Source, I open it and carry on with the edits and save it again. If I have accidentally overwritten the one I was editing, it doesn't matter because it's only the name which has changed. -- Jenny M Benson Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Legacy failing to recognize my email address
Pat, Do you have a Family Tree Webinars subscription? Most of the webinars are only available for a brief period (I believe 7 days or less) after they have been presented. Registering for a webinar does not mean that you can watch the webinar anytime you desire unless you do have a subscription. By the same token, if you do not have a subscription, then you cannot use your email to log into the Family Tree Webinars site. You will only be able yo view the webinars that are currently free for viewing. On Tuesday, March 11, 2014, Pat Hickin pph...@gmail.com wrote: Two things I haven't been able to do thus far: download the latest build for Legacy 8 and sign in to a webinar I had registered for but didn't see at the time. Pat On Mon, Mar 10, 2014 at 8:37 PM, Wendy Howard wendy.how...@gmail.comjavascript:_e(%7B%7D,'cvml','wendy.how...@gmail.com'); wrote: What do you mean? Where exactly are you trying to enter your address? Wendy Pat Hickin said the following on 11/03/2014 1:25 p.m.: Legacy is failing to recognize my email address (i.e, this address. What can I do?? Pat Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp -- Ron Bernier, Woonsocket, RI Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
RE: [LegacyUG] Question - Cemetery or Tombstone as the source?
Here is how I do it. I record the source using this template…. Cemetery Records Grave Markers, Plaques, Tombstones, Monumental Inscriptions Grave Markers, Rural (most of mine are rural) Here is how my citation looks: Pine Grove Baptist Church Cemetery (Lamar County, Mississippi), Eliza J. Barefoot marker, personally read, 2001. I then attach the photograph of the marker to the cemetery event. Michele Technical Support mich...@legacyfamilytree.com www.LegacyFamilyTree.com From: Poppke Genealogy [mailto:ad...@poppkegenealogy.com] Sent: 11 March 2014 00:05 To: legacyusergroup@LegacyUsers.com Subject: [LegacyUG] Question - Cemetery or Tombstone as the source? Hello, I photograph during cemetery trips and use the images as a source without transcription. I'm planning on listing the cemetery as the source, and record tombstone details as the various source details. Are there pros and cons to doing it this way? Would like some comments before I start. Thanks, Ted Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
RE: [LegacyUG] Master sources
It will definitely save you a ton of time :) Michele Technical Support mich...@legacyfamilytree.com www.LegacyFamilyTree.com -Original Message- From: Graham Love [mailto:love-fam...@blueyonder.co.uk] Sent: Tuesday, March 11, 2014 11:31 AM To: legacyusergroup@LegacyUsers.com Subject: RE: [LegacyUG] Master sources Brilliant! - works just fine. Thanks Michelle Graham Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Legacy failing to recognize my email address
Maybe not when you download, but on my screen that says Download Legacy 8.0 update, at the bottom of the screen it says in red letters Required email address and there's a box to put it in. Ron, the email address for webinars is the one I originally used to register for the webinars, the one on which I receive notices of webinars, the one I use for LUG emails. Pat On Tue, Mar 11, 2014 at 11:50 AM, Ron Bernier ronaldbern...@bernfrin.netwrote: Pat, Your email address should have nothing to do with downloading updates. You do not even need to provide an email address to download updates. If you are getting an invalid email address notice when trying to log into the Family Tree Webinars site, that means that the email address you are trying to log in with is not the same email address you originally registered with. On Tuesday, March 11, 2014, Pat Hickin pph...@gmail.com wrote: Two things I haven't been able to do thus far: download the latest build for Legacy 8 and sign in to a webinar I had registered for but didn't see at the time. Pat On Mon, Mar 10, 2014 at 8:37 PM, Wendy Howard wendy.how...@gmail.comwrote: What do you mean? Where exactly are you trying to enter your address? Wendy Pat Hickin said the following on 11/03/2014 1:25 p.m.: Legacy is failing to recognize my email address (i.e, this address. What can I do?? Pat Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp -- Ron Bernier, Woonsocket, RI Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Legacy failing to recognize my email address
Ron, the webinar I'm trying to watch was one presented last week and is supposed to still be available for viewing. Pat On Tue, Mar 11, 2014 at 12:57 PM, Pat Hickin pph...@gmail.com wrote: Maybe not when you download, but on my screen that says Download Legacy 8.0 update, at the bottom of the screen it says in red letters Required email address and there's a box to put it in. Ron, the email address for webinars is the one I originally used to register for the webinars, the one on which I receive notices of webinars, the one I use for LUG emails. Pat On Tue, Mar 11, 2014 at 11:50 AM, Ron Bernier ronaldbern...@bernfrin.netwrote: Pat, Your email address should have nothing to do with downloading updates. You do not even need to provide an email address to download updates. If you are getting an invalid email address notice when trying to log into the Family Tree Webinars site, that means that the email address you are trying to log in with is not the same email address you originally registered with. On Tuesday, March 11, 2014, Pat Hickin pph...@gmail.com wrote: Two things I haven't been able to do thus far: download the latest build for Legacy 8 and sign in to a webinar I had registered for but didn't see at the time. Pat On Mon, Mar 10, 2014 at 8:37 PM, Wendy Howard wendy.how...@gmail.comwrote: What do you mean? Where exactly are you trying to enter your address? Wendy Pat Hickin said the following on 11/03/2014 1:25 p.m.: Legacy is failing to recognize my email address (i.e, this address. What can I do?? Pat Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp -- Ron Bernier, Woonsocket, RI Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Legacy failing to recognize my email address
Pat, If you do not have a Webinars subscription, then you do not need to log in. Click on the tab that says Archived Webinars Any webinar that is available for viewing will be listed. If the webinar you are looking for is not listed, that means that it is no longer available. On Tue, Mar 11, 2014 at 12:59 PM, Pat Hickin pph...@gmail.com wrote: Ron, the webinar I'm trying to watch was one presented last week and is supposed to still be available for viewing. Pat On Tue, Mar 11, 2014 at 12:57 PM, Pat Hickin pph...@gmail.com wrote: Maybe not when you download, but on my screen that says Download Legacy 8.0 update, at the bottom of the screen it says in red letters Required email address and there's a box to put it in. Ron, the email address for webinars is the one I originally used to register for the webinars, the one on which I receive notices of webinars, the one I use for LUG emails. Pat On Tue, Mar 11, 2014 at 11:50 AM, Ron Bernier ronaldbern...@bernfrin.net wrote: Pat, Your email address should have nothing to do with downloading updates. You do not even need to provide an email address to download updates. If you are getting an invalid email address notice when trying to log into the Family Tree Webinars site, that means that the email address you are trying to log in with is not the same email address you originally registered with. On Tuesday, March 11, 2014, Pat Hickin pph...@gmail.com wrote: Two things I haven't been able to do thus far: download the latest build for Legacy 8 and sign in to a webinar I had registered for but didn't see at the time. Pat On Mon, Mar 10, 2014 at 8:37 PM, Wendy Howard wendy.how...@gmail.comwrote: What do you mean? Where exactly are you trying to enter your address? Wendy Pat Hickin said the following on 11/03/2014 1:25 p.m.: Legacy is failing to recognize my email address (i.e, this address. What can I do?? Pat Ron Bernier Woonsocket, RI Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Legacy failing to recognize my email address
Pat, Correction to my last email - it looks like all webinars are listed under Archived Webinars but you will only be able to view those that are free. If a webinar viewing period has expired, you will be able to view a preview but not the entire webinar. On Tue, Mar 11, 2014 at 12:59 PM, Pat Hickin pph...@gmail.com wrote: Ron, the webinar I'm trying to watch was one presented last week and is supposed to still be available for viewing. Pat On Tue, Mar 11, 2014 at 12:57 PM, Pat Hickin pph...@gmail.com wrote: Maybe not when you download, but on my screen that says Download Legacy 8.0 update, at the bottom of the screen it says in red letters Required email address and there's a box to put it in. Ron, the email address for webinars is the one I originally used to register for the webinars, the one on which I receive notices of webinars, the one I use for LUG emails. Pat On Tue, Mar 11, 2014 at 11:50 AM, Ron Bernier ronaldbern...@bernfrin.net wrote: Pat, Your email address should have nothing to do with downloading updates. You do not even need to provide an email address to download updates. If you are getting an invalid email address notice when trying to log into the Family Tree Webinars site, that means that the email address you are trying to log in with is not the same email address you originally registered with. On Tuesday, March 11, 2014, Pat Hickin pph...@gmail.com wrote: Two things I haven't been able to do thus far: download the latest build for Legacy 8 and sign in to a webinar I had registered for but didn't see at the time. Pat On Mon, Mar 10, 2014 at 8:37 PM, Wendy Howard wendy.how...@gmail.comwrote: What do you mean? Where exactly are you trying to enter your address? Wendy Pat Hickin said the following on 11/03/2014 1:25 p.m.: Legacy is failing to recognize my email address (i.e, this address. What can I do?? Pat Ron Bernier Woonsocket, RI Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Legacy failing to recognize my email address
Pat, What build of Legacy 8 were you running before you tried to update? Ron Ferguson http://www.fergys.co.uk/ Pat Hickin pph...@gmail.com wrote: Ron, the webinar I'm trying to watch was one presented last week and is supposed to still be available for viewing. Pat On Tue, Mar 11, 2014 at 12:57 PM, Pat Hickin pph...@gmail.com wrote: Maybe not when you download, but on my screen that says Download Legacy 8.0 update, at the bottom of the screen it says in red letters Required email address and there's a box to put it in. Ron, the email address for webinars is the one I originally used to register for the webinars, the one on which I receive notices of webinars, the one I use for LUG emails. Pat On Tue, Mar 11, 2014 at 11:50 AM, Ron Bernier ronaldbern...@bernfrin.net wrote: Pat, Your email address should have nothing to do with downloading updates. You do not even need to provide an email address to download updates. If you are getting an invalid email address notice when trying to log into the Family Tree Webinars site, that means that the email address you are trying to log in with is not the same email address you originally registered with. On Tuesday, March 11, 2014, Pat Hickin pph...@gmail.com wrote: Two things I haven't been able to do thus far: download the latest build for Legacy 8 and sign in to a webinar I had registered for but didn't see at the time. Pat On Mon, Mar 10, 2014 at 8:37 PM, Wendy Howard wendy.how...@gmail.com wrote: What do you mean? Where exactly are you trying to enter your address? Wendy Pat Hickin said the following on 11/03/2014 1:25 p.m.: Legacy is failing to recognize my email address (i.e, this address. What can I do?? Pat Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp -- Ron Bernier, Woonsocket, RI Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
RE: [LegacyUG] Question - Cemetery or Tombstone as the source?
Graham, Thank you. I considered this approach. My concern is; If I take a couple of photos of a monument, say to get a closer shot of each spouse, do I end up having a bunch of sources, say Pic01.jpg, Pic02.jpg, and Pic03.jpg? Are individual photos my sources, or is the collection of photos gathered together from one cemetery trip and stored together (digitally) my source? If I went this route, I would cite my source as a photo album of tombstone photos and have a photo album for each cemetery. That is how I store them now. My hierarchy on my storage drive is Country - State - County - City - Cemetery Name - Date I believe that photos are just a method of transcription. They can limit some types of errors. Thanks, Ted From: love-fam...@blueyonder.co.uk To: legacyusergroup@LegacyUsers.com Subject: RE: [LegacyUG] Question - Cemetery or Tombstone as the source? Date: Tue, 11 Mar 2014 15:46:20 + Slightly tongue in cheek but my favourite quote at the moment is from Geoff - 'What have you got in your hand?'. The answer in this case is a photograph so that should be the source and the source detail self evident. Cemetery burial records would be another source. Just a thought.Graham From: Poppke Genealogy [mailto:ad...@poppkegenealogy.com] Sent: 11 March 2014 00:05 To: legacyusergroup@LegacyUsers.com Subject: [LegacyUG] Question - Cemetery or Tombstone as the source? Hello, I photograph during cemetery trips and use the images as a source without transcription. I'm planning on listing the cemetery as the source, and record tombstone details as the various source details. Are there pros and cons to doing it this way? Would like some comments before I start. Thanks, Ted Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Legacy failing to recognize my email address
Ron, I'm was and still am running 8.0.0.358 with a build date of 6 Dec 2013. Pat On Tue, Mar 11, 2014 at 1:10 PM, Ron Ferguson ronfergy@tiscali.co.ukwrote: Pat, What build of Legacy 8 were you running before you tried to update? Ron Ferguson http://www.fergys.co.uk/ Pat Hickin pph...@gmail.com wrote: Ron, the webinar I'm trying to watch was one presented last week and is supposed to still be available for viewing. Pat On Tue, Mar 11, 2014 at 12:57 PM, Pat Hickin pph...@gmail.com wrote: Maybe not when you download, but on my screen that says Download Legacy 8.0 update, at the bottom of the screen it says in red letters Required email address and there's a box to put it in. Ron, the email address for webinars is the one I originally used to register for the webinars, the one on which I receive notices of webinars, the one I use for LUG emails. Pat On Tue, Mar 11, 2014 at 11:50 AM, Ron Bernier ronaldbern...@bernfrin.net wrote: Pat, Your email address should have nothing to do with downloading updates. You do not even need to provide an email address to download updates. If you are getting an invalid email address notice when trying to log into the Family Tree Webinars site, that means that the email address you are trying to log in with is not the same email address you originally registered with. On Tuesday, March 11, 2014, Pat Hickin pph...@gmail.com wrote: Two things I haven't been able to do thus far: download the latest build for Legacy 8 and sign in to a webinar I had registered for but didn't see at the time. Pat On Mon, Mar 10, 2014 at 8:37 PM, Wendy Howard wendy.how...@gmail.comwrote: What do you mean? Where exactly are you trying to enter your address? Wendy Pat Hickin said the following on 11/03/2014 1:25 p.m.: Legacy is failing to recognize my email address (i.e, this address. What can I do?? Pat Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp -- Ron Bernier, Woonsocket, RI Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from
Re: [LegacyUG] Master sources
Be aware that you only get that message if that source is already being used otherwise it will overwrite that source if no citation is being used. Make sure you choose one that is being used already. -Original Message- From: Michele/Support Sent: Tuesday, March 11, 2014 11:17 AM To: legacyusergroup@LegacyUsers.com Subject: RE: [LegacyUG] Master sources Yes, I do it all the time but you need to be VERY careful when you do this. Bring up the source you want to use but alter. Click Edit over on the right side. Make the changes you need. Now click Save. Make sure that you select 2. APPLY THE CHANGES TO A NEW COPY OF THIS MASTER SOURCE. You don't want to accidentally pick the first option or you will overwrite the one you already have and then you will have a mess. Make sure that you don't forget to change the NAME of the source too. Michele Technical Support mich...@legacyfamilytree.com www.LegacyFamilyTree.com -Original Message- From: Graham Love [mailto:love-fam...@blueyonder.co.uk] Sent: Tuesday, March 11, 2014 11:11 AM To: legacyusergroup@LegacyUsers.com Subject: [LegacyUG] Master sources Hi - a simple question but one which confounds me at the moment. I have to create numerous new sources which are similar (Single county parish registers where only the name of the parish is different but the origin of the source is different). Is it possible to copy a master source? Then I could just change the name and origin. Graham -- Russell G. Strong P. S. Check out Legacy Family Tree today! This full featured genealogy program can be downloaded FREE at http://www.legacyfamilytreestore.com/Articles.asp?ID=133Click=1114 Oh so many branches and not enough time to check out all the roots!!!. Check out my Genealogy Pages at http://www.rgstrong-genes.com . Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Question - Cemetery or Tombstone as the source?
Ted, I would say that the photo is the record of your personally read headstone, and the cemetery is the source and/or the repository of those headstones. From: Poppke Genealogy Sent: Tuesday, March 11, 2014 2:16 PM To: legacyusergroup@LegacyUsers.com Subject: RE: [LegacyUG] Question - Cemetery or Tombstone as the source? Graham, Thank you. I considered this approach. My concern is; If I take a couple of photos of a monument, say to get a closer shot of each spouse, do I end up having a bunch of sources, say Pic01.jpg, Pic02.jpg, and Pic03.jpg? Are individual photos my sources, or is the collection of photos gathered together from one cemetery trip and stored together (digitally) my source? If I went this route, I would cite my source as a photo album of tombstone photos and have a photo album for each cemetery. That is how I store them now. My hierarchy on my storage drive is Country - State - County - City - Cemetery Name - Date I believe that photos are just a method of transcription. They can limit some types of errors. Thanks, Ted From: love-fam...@blueyonder.co.uk To: legacyusergroup@LegacyUsers.com Subject: RE: [LegacyUG] Question - Cemetery or Tombstone as the source? Date: Tue, 11 Mar 2014 15:46:20 + Slightly tongue in cheek but my favourite quote at the moment is from Geoff - 'What have you got in your hand?'. The answer in this case is a photograph so that should be the source and the source detail self evident. Cemetery burial records would be another source. Just a thought. Graham From: Poppke Genealogy [mailto:ad...@poppkegenealogy.com] Sent: 11 March 2014 00:05 To: legacyusergroup@LegacyUsers.com Subject: [LegacyUG] Question - Cemetery or Tombstone as the source? Hello, I photograph during cemetery trips and use the images as a source without transcription. I'm planning on listing the cemetery as the source, and record tombstone details as the various source details. Are there pros and cons to doing it this way? Would like some comments before I start. Thanks, Ted -- Russell G. Strong P. S. Check out Legacy Family Tree today! This full featured genealogy program can be downloaded FREE at http://www.legacyfamilytreestore.com/Articles.asp?ID=133Click=1114 Oh so many branches and not enough time to check out all the roots!!!. Check out my Genealogy Pages at http://www.rgstrong-genes.com . Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Question - Cemetery or Tombstone as the source?
What source would you use for cemetery information from a cemetery website?(I use the cemetery, compiled, website one) I also have the headstone picture. I like the grave marker etc. source. Would it be entered as a separate event? Marli Yoder A M Farms Eureka Sturgeon Missouri From: Michele/Support mich...@legacyfamilytree.com To: legacyusergroup@LegacyUsers.com Sent: Tuesday, March 11, 2014 11:54 AM Subject: RE: [LegacyUG] Question - Cemetery or Tombstone as the source? Here is how I do it. I record the source using this template…. Cemetery Records Grave Markers, Plaques, Tombstones, Monumental Inscriptions Grave Markers, Rural (most of mine are rural) Here is how my citation looks: Pine Grove Baptist Church Cemetery (Lamar County, Mississippi), Eliza J. Barefoot marker, personally read, 2001. I then attach the photograph of the marker to the cemetery event. Michele Technical Support mich...@legacyfamilytree.com www.LegacyFamilyTree.com From: Poppke Genealogy [mailto:ad...@poppkegenealogy.com] Sent: 11 March 2014 00:05 To: legacyusergroup@LegacyUsers.com Subject: [LegacyUG] Question - Cemetery or Tombstone as the source? Hello, I photograph during cemetery trips and use the images as a source without transcription. I'm planning on listing the cemetery as the source, and record tombstone details as the various source details. Are there pros and cons to doing it this way? Would like some comments before I start. Thanks, Ted Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
RE: [LegacyUG] Question - Cemetery or Tombstone as the source?
Again, this is just the way I do it… For Find-A-Grave I use Cemetery Record Grave Markers, Plaques, Tombstones, Monumental Inscriptions Online Images This is what my citation looks like. Find A Grave, digital images (http://www.findagrave.com : accessed 01 November 2013), Kizzire Jenkins marker, Memorial #36842743, photograph by Belford Carver. Michele Technical Support mailto:mich...@legacyfamilytree.com mich...@legacyfamilytree.com http://www.LegacyFamilyTree.com www.LegacyFamilyTree.com From: Marli Yoder [mailto:yosbutter...@yahoo.com] Sent: Tuesday, March 11, 2014 2:47 PM To: legacyusergroup@LegacyUsers.com Subject: Re: [LegacyUG] Question - Cemetery or Tombstone as the source? What source would you use for cemetery information from a cemetery website?(I use the cemetery, compiled, website one) I also have the headstone picture. I like the grave marker etc. source. Would it be entered as a separate event? Marli Yoder A M Farms Eureka Sturgeon Missouri From: Michele/Support mich...@legacyfamilytree.com mailto:mich...@legacyfamilytree.com To: legacyusergroup@LegacyUsers.com mailto:legacyusergroup@LegacyUsers.com Sent: Tuesday, March 11, 2014 11:54 AM Subject: RE: [LegacyUG] Question - Cemetery or Tombstone as the source? Here is how I do it. I record the source using this template…. Cemetery Records Grave Markers, Plaques, Tombstones, Monumental Inscriptions Grave Markers, Rural (most of mine are rural) Here is how my citation looks: Pine Grove Baptist Church Cemetery (Lamar County, Mississippi), Eliza J. Barefoot marker, personally read, 2001. I then attach the photograph of the marker to the cemetery event. Michele Technical Support mich...@legacyfamilytree.com mailto:mich...@legacyfamilytree.com www.LegacyFamilyTree.com http://www.LegacyFamilyTree.com From: Poppke Genealogy [mailto:ad...@poppkegenealogy.com mailto:ad...@poppkegenealogy.com ] Sent: 11 March 2014 00:05 To: legacyusergroup@LegacyUsers.com mailto:legacyusergroup@LegacyUsers.com Subject: [LegacyUG] Question - Cemetery or Tombstone as the source? Hello, I photograph during cemetery trips and use the images as a source without transcription. I'm planning on listing the cemetery as the source, and record tombstone details as the various source details. Are there pros and cons to doing it this way? Would like some comments before I start. Thanks, Ted Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Question - Cemetery or Tombstone as the source?
I use the Cemetery recordsCompiled records: database online template for those like at rootsweb and if they are for those from find a grave then I use the InternetWebsite, generic with a new source for each contributor to that Cemeteries find a grave memorials. So I may have several find a grave sources for a cemetery but different contributors and each contributors memorials would be the citation. From: Marli Yoder Sent: Tuesday, March 11, 2014 2:47 PM To: legacyusergroup@LegacyUsers.com Subject: Re: [LegacyUG] Question - Cemetery or Tombstone as the source? What source would you use for cemetery information from a cemetery website?(I use the cemetery, compiled, website one) I also have the headstone picture. I like the grave marker etc. source. Would it be entered as a separate event? Marli Yoder A M Farms Eureka Sturgeon Missouri From: Michele/Support mich...@legacyfamilytree.com To: legacyusergroup@LegacyUsers.com Sent: Tuesday, March 11, 2014 11:54 AM Subject: RE: [LegacyUG] Question - Cemetery or Tombstone as the source? Here is how I do it. I record the source using this template…. Cemetery Records Grave Markers, Plaques, Tombstones, Monumental Inscriptions Grave Markers, Rural (most of mine are rural) Here is how my citation looks: Pine Grove Baptist Church Cemetery (Lamar County, Mississippi), Eliza J. Barefoot marker, personally read, 2001. I then attach the photograph of the marker to the cemetery event. Michele Technical Support mich...@legacyfamilytree.com www.LegacyFamilyTree.com From: Poppke Genealogy [mailto:ad...@poppkegenealogy.com] Sent: 11 March 2014 00:05 To: legacyusergroup@LegacyUsers.com Subject: [LegacyUG] Question - Cemetery or Tombstone as the source? Hello, I photograph during cemetery trips and use the images as a source without transcription. I'm planning on listing the cemetery as the source, and record tombstone details as the various source details. Are there pros and cons to doing it this way? Would like some comments before I start. Thanks, Ted -- Russell G. Strong P. S. Check out Legacy Family Tree today! This full featured genealogy program can be downloaded FREE at http://www.legacyfamilytreestore.com/Articles.asp?ID=133Click=1114 Oh so many branches and not enough time to check out all the roots!!!. Check out my Genealogy Pages at http://www.rgstrong-genes.com . Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
[LegacyUG] Unable to open Legacy after update
What next? I think I downloaded the updaye. Ar least I got a message from Norton (my anti-virus) saying legacy.exe was safe, but now I can't open the program from either the taskbar or the start menu. Gr-r-r-r. Pat Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
[LegacyUG] Marriage media files
Something has happened to my Marriage Media Files icon that I have never seen before. Its probably something that I have entered but, on some people the icon on the Family view is only coloured on the lefthand side whilst the right-hand side of the icon is black and white. What does this indicate ? Jo Poi Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Unable to open Legacy after update
Pat, My previous response still stands at this stage – perhaps more so! Ron Ferguson http://www.fergys.co.uk/ From: Pat Hickin Sent: Tuesday, March 11, 2014 8:33 PM To: legacyusergroup@LegacyUsers.com Subject: [LegacyUG] Unable to open Legacy after update What next? I think I downloaded the updaye. Ar least I got a message from Norton (my anti-virus) saying legacy.exe was safe, but now I can't open the program from either the taskbar or the start menu. Gr-r-r-r. Pat Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Legacy failing to recognize my email address
Pat, Thank you. Initially may I make it clear that I do not know why you are hitting the download problems. I can, therefore, only suggest what I would do under your circumstances, rather than give a proven resolution for the problem. I would start by forgetting about updating and consider a complete reinstall. To this end I would uninstall v. 8.0.0.358. I have thought quite a bit about this, as I realise that it is the only working version of v 8.0 which you have. Nevertheless, I think it would be advisable. It will not affect your data etc. which is now stored in your documents. Then download the full version of the current version (v 8.0.0.414) from the web. It will ask for your email address (any will do) and do let it download until complete – keep an eye on the progress, and if it stops leave it until it restarts. Then install. Please let us know the outcome. Ron Ferguson http://www.fergys.co.uk/ From: Pat Hickin Sent: Tuesday, March 11, 2014 6:31 PM To: legacyusergroup@LegacyUsers.com Subject: Re: [LegacyUG] Legacy failing to recognize my email address Ron, I'm was and still am running 8.0.0.358 with a build date of 6 Dec 2013. Pat On Tue, Mar 11, 2014 at 1:10 PM, Ron Ferguson ronfergy@tiscali.co.uk wrote: Pat, What build of Legacy 8 were you running before you tried to update? Ron Ferguson http://www.fergys.co.uk/ Pat Hickin pph...@gmail.com wrote: Ron, the webinar I'm trying to watch was one presented last week and is supposed to still be available for viewing. Pat On Tue, Mar 11, 2014 at 12:57 PM, Pat Hickin pph...@gmail.com wrote: Maybe not when you download, but on my screen that says Download Legacy 8.0 update, at the bottom of the screen it says in red letters Required email address and there's a box to put it in. Ron, the email address for webinars is the one I originally used to register for the webinars, the one on which I receive notices of webinars, the one I use for LUG emails. Pat On Tue, Mar 11, 2014 at 11:50 AM, Ron Bernier ronaldbern...@bernfrin.net wrote: Pat, Your email address should have nothing to do with downloading updates. You do not even need to provide an email address to download updates. If you are getting an invalid email address notice when trying to log into the Family Tree Webinars site, that means that the email address you are trying to log in with is not the same email address you originally registered with. On Tuesday, March 11, 2014, Pat Hickin pph...@gmail.com wrote: Two things I haven't been able to do thus far: download the latest build for Legacy 8 and sign in to a webinar I had registered for but didn't see at the time. Pat On Mon, Mar 10, 2014 at 8:37 PM, Wendy Howard wendy.how...@gmail.com wrote: What do you mean? Where exactly are you trying to enter your address? Wendy Pat Hickin said the following on 11/03/2014 1:25 p.m.: Legacy is failing to recognize my email address (i.e, this address. What can I do?? Pat Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
RE: [LegacyUG] Duplicate ID Numbers Software Problem?
Curious. I tried on my database which is about the same size and it only found 12 duplicates and all seem to be correctly identified. The duplicated id shows in the title line of duplicates window. Did you notice anything strange about the ID #'s it was displaying as duplicate? Were they truncated? Ignoring the alpha component? -Original Message- From: J.M. Jay Ingalls [mailto:jay_inga...@pipeline.com] Sent: Friday, March 07, 2014 5:55 PM To: legacyusergroup@LegacyUsers.com Subject: [LegacyUG] Duplicate ID Numbers Software Problem? If you use the ID Number field in Legacy, have you tried a search for duplicate ID numbers? Go to; My Toolbar, Merge, Find Duplicates, Special Duplicates Search, Find duplicates using only User ID number, Continue. I ran the search for duplicate ID numbers and found 57, 416 duplicate ID numbers per the Legacy version 8 software. I have ran it in the past with previous versions of Legacy and did not find many. When I go to the Name List, I only have 66,194 people in my database! I do have duplicate ID numbers starting with B, because I imported data long ago for Ingalls listed in Burleigh's 1903 book on the Ingalls. The researcher who added the data to her genealogy program added ID numbers starting with B for Burleigh to indicate the number came from his book. The book was published in 1903, so many of the individuals she added to her data are descendants of some one in his book. She handled that by using the number for the last ancestor listed in Burleigh plus a dash number indicating the number of generations an individual is removed from B1. So, there can be many descendants with the same ID number such as B1222-10. I did a search for ID numbers starting with B and found 3,948 People with ID Numbers starting with B. Not all of them are duplicates! I did a fairly extensive audit of all my ID numbers and found very few identical ID Numbers, except for the Burleigh numbers. Looks to me like there is a software problem. Jay Ingalls Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Marriage media files
On 11/03/2014 20:45, Jo Poi wrote: Something has happened to my Marriage Media Files icon that I have never seen before. Its probably something that I have entered but, on some people the icon on the Family view is only coloured on the lefthand side whilst the right-hand side of the icon is black and white. What does this indicate ? When the icon is half-coloured it indicates that you have added media to the person's Events, but not an Individual's Picture. If the person has a picture attached to him/herself the icon is fully coloured. -- Jenny M Benson Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Unable to open Legacy after update
Have you done the install after the download? On 03/11/2014 16:33, Pat Hickin wrote: What next? I think I downloaded the updaye. Ar least I got a message from Norton (my anti-virus) saying legacy.exe was safe, but now I can't open the program from either the taskbar or the start menu. Gr-r-r-r. Pat Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
RE: [LegacyUG] Duplicate ID Numbers Software Problem?
V800-414. 120,902 individuals. No User ID Duplicates. C.G. Ouimet Kingston ON -Original Message- From: Kurt Kneeland [mailto:kurt-kneel...@sbcglobal.net] Sent: March 11, 2014 05:30 PM To: legacyusergroup@LegacyUsers.com Subject: RE: [LegacyUG] Duplicate ID Numbers Software Problem? Curious. I tried on my database which is about the same size and it only found 12 duplicates and all seem to be correctly identified. The duplicated id shows in the title line of duplicates window. Did you notice anything strange about the ID #'s it was displaying as duplicate? Were they truncated? Ignoring the alpha component? -Original Message- From: J.M. Jay Ingalls [mailto:jay_inga...@pipeline.com] Sent: Friday, March 07, 2014 5:55 PM To: legacyusergroup@LegacyUsers.com Subject: [LegacyUG] Duplicate ID Numbers Software Problem? If you use the ID Number field in Legacy, have you tried a search for duplicate ID numbers? Go to; My Toolbar, Merge, Find Duplicates, Special Duplicates Search, Find duplicates using only User ID number, Continue. I ran the search for duplicate ID numbers and found 57, 416 duplicate ID numbers per the Legacy version 8 software. I have ran it in the past with previous versions of Legacy and did not find many. When I go to the Name List, I only have 66,194 people in my database! I do have duplicate ID numbers starting with B, because I imported data long ago for Ingalls listed in Burleigh's 1903 book on the Ingalls. The researcher who added the data to her genealogy program added ID numbers starting with B for Burleigh to indicate the number came from his book. The book was published in 1903, so many of the individuals she added to her data are descendants of some one in his book. She handled that by using the number for the last ancestor listed in Burleigh plus a dash number indicating the number of generations an individual is removed from B1. So, there can be many descendants with the same ID number such as B1222-10. I did a search for ID numbers starting with B and found 3,948 People with ID Numbers starting with B. Not all of them are duplicates! I did a fairly extensive audit of all my ID numbers and found very few identical ID Numbers, except for the Burleigh numbers. Looks to me like there is a software problem. Jay Ingalls Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Unable to open Legacy after update
On 11 Mar 2014 22:33, Pat Hickin wrote: What next? I think I downloaded the updaye. Ar least I got a message from Norton (my anti-virus) saying legacy.exe was safe, but now I can't open the program from either the taskbar or the start menu. Where is the downloaded file? What are its' properties? Sometimes, on Vista or later versions of Windows, downloaded files are marked as being a security risk. The Properties page for a downloaded file has extra information on the General tab that says Security: This file came from another computer and might be blocked to help protect this computer. There will also be an Unblock button next to this message. Click it and then click OK. The installation should then run. -- Regards, Mike Fry Johannesburg (g) Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Duplicate ID Numbers Software Problem?
I applied the RINs preceded by RIN- to my database of about 5,000. I had used the ID field years ago when inputting data on my maternal grandparents descendants from a report created by a cousin at a family reunion so there were some manual IDs in the file as well, it was a spreadsheet and I used the line number for each person as their ID number. A duplicate ID field search found 296 duplicates. The first dozen I checked were all valid duplicate ID numbers because the spreadsheet had both husbands and wives on the same line number. Brian Customer Support Millennia Corporation br...@legacyfamilytree.com http://www.LegacyFamilyTree.com On 07/03/2014 6:55 PM, J.M. Jay Ingalls wrote: If you use the ID Number field in Legacy, have you tried a search for duplicate ID numbers? Go to; My Toolbar, Merge, Find Duplicates, Special Duplicates Search, Find duplicates using only User ID number, Continue. I ran the search for duplicate ID numbers and found 57, 416 duplicate ID numbers per the Legacy version 8 software. I have ran it in the past with previous versions of Legacy and did not find many. When I go to the Name List, I only have 66,194 people in my database! I do have duplicate ID numbers starting with B, because I imported data long ago for Ingalls listed in Burleigh's 1903 book on the Ingalls. The researcher who added the data to her genealogy program added ID numbers starting with B for Burleigh to indicate the number came from his book. The book was published in 1903, so many of the individuals she added to her data are descendants of some one in his book. She handled that by using the number for the last ancestor listed in Burleigh plus a dash number indicating the number of generations an individual is removed from B1. So, there can be many descendants with the same ID number such as B1222-10. I did a search for ID numbers starting with B and found 3,948 People with ID Numbers starting with B. Not all of them are duplicates! I did a fairly extensive audit of all my ID numbers and found very few identical ID Numbers, except for the Burleigh numbers. Looks to me like there is a software problem. Jay Ingalls Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] keyboard shortcut for the Index (not Name List)
Brian, You're wonderful! This is just what I needed! Thank you! Dee On Tue, Mar 11, 2014 at 6:25 PM, Brian/Support br...@legacyfamilytree.comwrote: ALT-F1 through ALT-F6 switch between the tab views. Alt-F6 will give you Index View. Brian Customer Support Millennia Corporation br...@legacyfamilytree.com http://www.LegacyFamilyTree.com On 11/03/2014 9:02 PM, Dee wrote: Is there a keyboard shortcut in Legacy 8 for the Index? Not the Name List, please. Legacy 8 is great. Dee Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Duplicate ID Numbers Software Problem?
The 220 set count include MRINs where the ID was set as well as the 160 individual RINS. The Sample database has 60 marriages and 160 people for a total of 220. The cleared count looks like it is not clearing those 60 Marriage IDs that were set. That is a problem I have input to our reporting system. Brian Customer Support Millennia Corporation br...@legacyfamilytree.com http://www.LegacyFamilyTree.com On 11/03/2014 9:28 PM, J.M. Jay Ingalls wrote: Thanks to the people who checked for duplicate ID numbers and did not find a software problem. I did go to the Sample data base. Checked for duplicate ID numbers and none found. Went to the customize option and used the option to clear all ID numbers, none found. Used the option to use the prefix JMI and the RIN number to set ID numbers for all. 220 set. Used the clear all, says cleared 160! Set the ID numbers again, the same way, says 160 set. Cleared again, 160 cleared. Name list says contains 160 individuals Ran the merge duplicate ID numbers again, none found. The 220 set, 160 cleared, 160 set, 160 cleared indicates there is a software problem. Would appreciate it if some of you would try this on the Sample data base. I am beginning to suspect that I may have a bad Legacy usr file or something. I Tried this on an old Legacy 7.5 file and had similar results as for the Legacy 8 Sample file. 62,168 Individuals in file 50,837 duplicate ID numbers 61,503 cleared (all) 84,620 set (all) 62,168 cleared Last 2 steps repeated Jay Ingalls Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
[LegacyUG] keyboard shortcut for the Index (not Name List)
Is there a keyboard shortcut in Legacy 8 for the Index? Not the Name List, please. Legacy 8 is great. Dee Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] keyboard shortcut for the Index (not Name List)
ALT-F1 through ALT-F6 switch between the tab views. Alt-F6 will give you Index View. Brian Customer Support Millennia Corporation br...@legacyfamilytree.com http://www.LegacyFamilyTree.com On 11/03/2014 9:02 PM, Dee wrote: Is there a keyboard shortcut in Legacy 8 for the Index? Not the Name List, please. Legacy 8 is great. Dee Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] keyboard shortcut for the Index (not Name List)
Brian, Those Alt-F1...F6 keys are not documented in the HelpShortcut Keys. Very helpful...thank you. Also, the single key command S is not documented in the HelpShortcut Keys under Family and Pedigree View. The single key command ? in Family and Pedigree View is great for all the shortcut key commands that are documented. Ron Taylor On Tuesday, March 11, 2014 7:50 PM, Dee deema...@gmail.com wrote: Brian, You're wonderful! This is just what I needed! Thank you! Dee On Tue, Mar 11, 2014 at 6:25 PM, Brian/Support br...@legacyfamilytree.com wrote: ALT-F1 through ALT-F6 switch between the tab views. Alt-F6 will give you Index View. Brian Customer Support Millennia Corporation br...@legacyfamilytree.com http://www.LegacyFamilyTree.com On 11/03/2014 9:02 PM, Dee wrote: Is there a keyboard shortcut in Legacy 8 for the Index? Not the Name List, please. Legacy 8 is great. Dee Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
[LegacyUG] Duplicate ID Numbers Software Problem?
Thanks to the people who checked for duplicate ID numbers and did not find a software problem. I did go to the Sample data base. Checked for duplicate ID numbers and none found. Went to the customize option and used the option to clear all ID numbers, none found. Used the option to use the prefix JMI and the RIN number to set ID numbers for all. 220 set. Used the clear all, says cleared 160! Set the ID numbers again, the same way, says 160 set. Cleared again, 160 cleared. Name list says contains 160 individuals Ran the merge duplicate ID numbers again, none found. The 220 set, 160 cleared, 160 set, 160 cleared indicates there is a software problem. Would appreciate it if some of you would try this on the Sample data base. I am beginning to suspect that I may have a bad Legacy usr file or something. I Tried this on an old Legacy 7.5 file and had similar results as for the Legacy 8 Sample file. 62,168 Individuals in file 50,837 duplicate ID numbers 61,503 cleared (all) 84,620 set (all) 62,168 cleared Last 2 steps repeated Jay Ingalls Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Unable to open Legacy after update
Yes, Mike, that did it. Thanks a million for you help!! Pat On Tue, Mar 11, 2014 at 6:54 PM, MikeFry emjay...@gmail.com wrote: On 11 Mar 2014 22:33, Pat Hickin wrote: What next? I think I downloaded the updaye. Ar least I got a message from Norton (my anti-virus) saying legacy.exe was safe, but now I can't open the program from either the taskbar or the start menu. Where is the downloaded file? What are its' properties? Sometimes, on Vista or later versions of Windows, downloaded files are marked as being a security risk. The Properties page for a downloaded file has extra information on the General tab that says Security: This file came from another computer and might be blocked to help protect this computer. There will also be an Unblock button next to this message. Click it and then click OK. The installation should then run. -- Regards, Mike Fry Johannesburg (g) Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
RE: [LegacyUG] Source Citation; multiple sources on clipboard
Thanks Cathy and Jenny; I get it now. . I somehow missed those 2 points, the right click on the source/save, and the copy to source clipboard at the bottom left. That helps immensely to be able to copy an assigned source to re-use for a specific family. I was using the prompt for detail, I understood that part, just was using the wrong save button and thus was losing my typing entries, and not the copy button at the bottom! I appreciate your time to help Sincerely, Pam -Original Message- From: Cathy Pinner [mailto:genea...@gmail.com] Sent: Sunday, March 09, 2014 11:37 PM To: legacyusergroup@LegacyUsers.com Subject: Re: [LegacyUG] Source Citation; multiple sources on clipboard Hi Pam, I haven't seen the presentation but I think you misunderstood unless there is a change coming that Geoff has and beta testers don't have. You can avoid having all the sources added if you have prompt for detail checked - but once you cancel that's it - the rest of the sources on the multiple source clipboard are not attached. Try it out on the Sample database or some other test database. I think the multiple source clipboard is an abomination and I wouldn't use it for anything - in fact I can't think of a case in my own research when it could be useful. So I use the single source clipboard constantly. How do I change back to another source without retyping? If I know I'll want to use it again soon, or it is a source I often use, I SAVE it and then LOAD it to the clipboard when I want to use it again. 10 sources can be saved in this way. If I didn't realise I'd want it again and so haven't saved it, then I find the person where I used it and go to their Assigned Sources page. Highlight it and then use the Copy to Source Clipboard button on the bottom left of that screen. If you haven't got Prompt for Detail always checked, you will need to then click the triangle of the Source Clipboard if you need to make any changes to the Source Detail or change the Recorded Date. However, it's worth updating. The cautious wait a few days after the release of a build. If there's any real problem, it will be followed within a day or two with another build. Have fun, Cathy At 01:22 PM 10/03/2014, you wrote: Hello, I saw Geoff’s great presentation on Sources on Friday great Geoff by the way! Anyway, it looked like, from his demo, now?  we can pick and choose which of the 5 sources on the clipboard we want to “sourceâ€, instead of them ALL being pasted at once. . is this new since the lastest build(s)? Or did I misunderstand him? What he showed (e.g. select one source from list),  doesn’t work for me, ( I am using the build from March 9, is that build 367? (not listing correctly in my download but that is another issue). It still pastes all sources to whatever event or person is applicable where I am working. So did I misunderstand his demo . .or I’m not doing it right?  I know they’ve been working on this issue, but hadn’t read about any changes. . .if this is not true, how do people handle having to go back to another previous source WITHOUT pasting/copy/retyping multiple lines of information?). I know I could make a SEPARATE new master source for everything, (I do it for census items,  it’s not that hard to redo w/ cut/paste w/ census information)  but for individual family sources,  I was trying to combine sources that are similar and easily copy specific data(e.g. a specific case or ID #, multiple line items) relevant to that particular family or situation, instead of adding thousands of similar master sources, just to prevent having to do a search and find and retype of the same source again later, when I already have it detailed for another family member. (not sure if I’m explaining myself very well. . feel free to ask for a better explanation)   I also  tried double clicking  on the previous (duplicate) source,  for example, for that previous family member in the  individual assigned source detail line, brings up the source, but that doesn’t save to the clipboard(would that be an easier change from a programming standpoint than changing the multiple source function on the clipboard?) Or, how do other people do this differently? I can figure out my own workarounds if there isn’t a better way, but wondered if I’m missing something. Or, maybe, if this is as shown in the seminar, I just need the newest build? Thanks for any help, from a sometimes tech challenged Pam Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To
Re: [LegacyUG] keyboard shortcut for the Index (not Name List)
Thank you also to Ron for those missing keys. And, on the back cover of the manual, there are more. . . . On Tue, Mar 11, 2014 at 7:09 PM, Ron Taylor doit4...@yahoo.com wrote: Brian, Those Alt-F1...F6 keys are not documented in the HelpShortcut Keys. Very helpful...thank you. Also, the single key command S is not documented in the HelpShortcut Keys under Family and Pedigree View. The single key command ? in Family and Pedigree View is great for all the shortcut key commands that are documented. Ron Taylor On Tuesday, March 11, 2014 7:50 PM, Dee deema...@gmail.com wrote: Brian, You're wonderful! This is just what I needed! Thank you! Dee On Tue, Mar 11, 2014 at 6:25 PM, Brian/Support br...@legacyfamilytree.com wrote: ALT-F1 through ALT-F6 switch between the tab views. Alt-F6 will give you Index View. Brian Customer Support Millennia Corporation br...@legacyfamilytree.com http://www.LegacyFamilyTree.com http://www.legacyfamilytree.com/ On 11/03/2014 9:02 PM, Dee wrote: Is there a keyboard shortcut in Legacy 8 for the Index? Not the Name List, please. Legacy 8 is great. Dee Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asphttp://www.legacyfamilytree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asphttp://www.legacyfamilytree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.comhttp://news.legacyfamilytree.com/ ). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asphttp://www.legacyfamilytree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
[LegacyUG] Recording changes of residence
I'm trying to get some ideas for recording changes of residence for an individual. Similarly, though not the same, how might we record knowledge that a person lived at address A in year Y? In Legacy's Master Event Definition List are some possible event names (Land, Property, Immigration, Emigration), though I don't quite like any of them for reflecting either a change of residence within a country or that we know the person lived at address A in a given year. The Census event would seem fine for indicating the latter based on a census, but that is too specific and is rather arbitrary just to handle knowledge of a person's location based just on a census source. I added a Residence event to the list, but I am not particularly happy about that as it doesn't address a move. Any good ideas for handling this? Am I missing something? Roger Lamprey Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] keyboard shortcut for the Index (not Name List)
I know this must be a really dumb question, but once you use the AltF6 key to get to the index, which key combo takes one back to the family view? Jane On 3/11/2014 10:31 PM, Dee wrote: Thank you also to Ron for those missing keys. And, on the back cover of the manual, there are more. . . . On Tue, Mar 11, 2014 at 7:09 PM, Ron Taylor doit4...@yahoo.com mailto:doit4...@yahoo.com wrote: Brian, Those Alt-F1...F6 keys are not documented in the HelpShortcut Keys. Very helpful...thank you. Also, the single key command S is not documented in the HelpShortcut Keys under Family and Pedigree View. The single key command ? in Family and Pedigree View is great for all the shortcut key commands that are documented. Ron Taylor On Tuesday, March 11, 2014 7:50 PM, Dee deema...@gmail.com mailto:deema...@gmail.com wrote: Brian, You're wonderful! This is just what I needed! Thank you! Dee On Tue, Mar 11, 2014 at 6:25 PM, Brian/Support br...@legacyfamilytree.com mailto:br...@legacyfamilytree.com wrote: ALT-F1 through ALT-F6 switch between the tab views. Alt-F6 will give you Index View. Brian Customer Support Millennia Corporation br...@legacyfamilytree.com mailto:br...@legacyfamilytree.com http://www.LegacyFamilyTree.com http://www.legacyfamilytree.com/ On 11/03/2014 9:02 PM, Dee wrote: Is there a keyboard shortcut in Legacy 8 for the Index? Not the Name List, please. Legacy 8 is great. Dee Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp http://www.legacyfamilytree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp http://www.legacyfamilytree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com http://news.legacyfamilytree.com/). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp http://www.legacyfamilytree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Legacy failing to recognize my email address
Good idea, Ron, but I did find the problem with the update so it's all installed now. Thanks for your interest!! Pat On Tue, Mar 11, 2014 at 4:42 PM, Ron Ferguson ronfergy@tiscali.co.ukwrote: Pat, Thank you. Initially may I make it clear that I do not know why you are hitting the download problems. I can, therefore, only suggest what I would do under your circumstances, rather than give a proven resolution for the problem. I would start by forgetting about updating and consider a complete reinstall. To this end I would uninstall v. 8.0.0.358. I have thought quite a bit about this, as I realise that it is the only working version of v 8.0 which you have. Nevertheless, I think it would be advisable. It will not affect your data etc. which is now stored in your documents. Then download the full version of the current version (v 8.0.0.414) from the web. It will ask for your email address (any will do) and do let it download until complete - keep an eye on the progress, and if it stops leave it until it restarts. Then install. Please let us know the outcome. Ron Ferguson http://www.fergys.co.uk/ *From:* Pat Hickin pph...@gmail.com *Sent:* Tuesday, March 11, 2014 6:31 PM *To:* legacyusergroup@LegacyUsers.com *Subject:* Re: [LegacyUG] Legacy failing to recognize my email address Ron, I'm was and still am running 8.0.0.358 with a build date of 6 Dec 2013. Pat On Tue, Mar 11, 2014 at 1:10 PM, Ron Ferguson ronfergy@tiscali.co.ukwrote: Pat, What build of Legacy 8 were you running before you tried to update? Ron Ferguson http://www.fergys.co.uk/ Pat Hickin pph...@gmail.com wrote: Ron, the webinar I'm trying to watch was one presented last week and is supposed to still be available for viewing. Pat On Tue, Mar 11, 2014 at 12:57 PM, Pat Hickin pph...@gmail.com wrote: Maybe not when you download, but on my screen that says Download Legacy 8.0 update, at the bottom of the screen it says in red letters Required email address and there's a box to put it in. Ron, the email address for webinars is the one I originally used to register for the webinars, the one on which I receive notices of webinars, the one I use for LUG emails. Pat On Tue, Mar 11, 2014 at 11:50 AM, Ron Bernier ronaldbern...@bernfrin.net wrote: Pat, Your email address should have nothing to do with downloading updates. You do not even need to provide an email address to download updates. If you are getting an invalid email address notice when trying to log into the Family Tree Webinars site, that means that the email address you are trying to log in with is not the same email address you originally registered with. On Tuesday, March 11, 2014, Pat Hickin pph...@gmail.com wrote: Two things I haven't been able to do thus far: download the latest build for Legacy 8 and sign in to a webinar I had registered for but didn't see at the time. Pat On Mon, Mar 10, 2014 at 8:37 PM, Wendy Howard wendy.how...@gmail.com wrote: What do you mean? Where exactly are you trying to enter your address? Wendy Pat Hickin said the following on 11/03/2014 1:25 p.m.: Legacy is failing to recognize my email address (i.e, this address. What can I do?? Pat Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
RE: [LegacyUG] keyboard shortcut for the Index (not Name List)
Hi Jane, I’ll jump in here… With Legacy open there are six tabs across the top: Legacy Home, Family, Pedigree, Descendant, Chronology, Index. The six Alt-F1…F6 shortcuts represent those six tabs. To go to Family View (second tab) use Alt-F2, Index = Alt-F6. Bob A From: Jane Sarles [mailto:sarlesinsi...@gmail.com] Sent: Tuesday, March 11, 2014 7:47 PM To: legacyusergroup@LegacyUsers.com Subject: Re: [LegacyUG] keyboard shortcut for the Index (not Name List) I know this must be a really dumb question, but once you use the AltF6 key to get to the index, which key combo takes one back to the family view? Jane On 3/11/2014 10:31 PM, Dee wrote: Thank you also to Ron for those missing keys. And, on the back cover of the manual, there are more. . . . On Tue, Mar 11, 2014 at 7:09 PM, Ron Taylor doit4...@yahoo.com wrote: Brian, Those Alt-F1...F6 keys are not documented in the HelpShortcut Keys. Â Very helpful...thank you. Also, the single key command S is not documented in the HelpShortcut Keys under Family and Pedigree View. The single key command ? in Family and Pedigree View is great for all the shortcut key commands that are documented. Ron Taylor On Tuesday, March 11, 2014 7:50 PM, Dee deema...@gmail.com wrote: Brian, You're wonderful! This is just what I needed! Thank you! Dee On Tue, Mar 11, 2014 at 6:25 PM, Brian/Support br...@legacyfamilytree.com wrote: ALT-F1 through ALT-F6 switch between the tab views. Alt-F6 will give you Index View. Brian Customer Support Millennia Corporation br...@legacyfamilytree.com http://www.LegacyFamilyTree.com http://www.legacyfamilytree.com/ On 11/03/2014 9:02 PM, Dee wrote: Is there a keyboard shortcut in Legacy 8 for the Index? Not the Name List, please. Legacy 8 is great. Dee subscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
[LegacyUG] A simple place-name question
When recording the place of an event, we should record it as it was at the time of the event, rather than as it would be referred to today. In that case, how should we refer to the American Colonies as a group for events taking place before the United States became a nation (maybe just American Colonies?). And, at what date did the crossover from that name to United States take place? Thanks! Roger Lamprey Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Recording changes of residence
Roger: I enter a Residence Event for each residence. You can include the date the full address as part of the Event or in the Notes of the event. When a person moves to another location, I add a new Residence Event with the new date and new address. This becomes part of the individual's chronology or life store as to where that person lived. This information also allows you to Map Family that shows a nice graphic of where the person has lived and events have taken place. An example using Census information as the source would look like the following: 1900 Jun 20Residence:USA, IA, Wapello Co, Columbia. 1910 Jul 1Residence:USA, KS, Cowley Co, Pleasant Valley. 1920 Jan 2Residence:USA, OK, Kay Co, Vernon. Enjoy! Chap ___ Leon Chapman chap...@gmail.com - On Tue, Mar 11, 2014 at 7:43 PM, Roger Lamprey ro...@rogerlamprey.comwrote: I'm trying to get some ideas for recording changes of residence for an individual. Similarly, though not the same, how might we record knowledge that a person lived at address A in year Y? In Legacy's Master Event Definition List are some possible event names (Land, Property, Immigration, Emigration), though I don't quite like any of them for reflecting either a change of residence within a country or that we know the person lived at address A in a given year. The Census event would seem fine for indicating the latter based on a census, but that is too specific and is rather arbitrary just to handle knowledge of a person's location based just on a census source. I added a Residence event to the list, but I am not particularly happy about that as it doesn't address a move. Any good ideas for handling this? Am I missing something? Roger Lamprey -- Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] keyboard shortcut for the Index (not Name List)
Try each one of them until you get familiar with how they invoke the various tabs. Ron Taylor On Tuesday, March 11, 2014 9:14 PM, Bob Austen rgaus...@telus.net wrote: Hi Jane, I’ll jump in here… With Legacy open there are six tabs across the top: Legacy Home, Family, Pedigree, Descendant, Chronology, Index. The six Alt-F1…F6 shortcuts represent those six tabs. To go to Family View (second tab) use Alt-F2, Index = Alt-F6. Bob A From:Jane Sarles [mailto:sarlesinsi...@gmail.com] Sent: Tuesday, March 11, 2014 7:47 PM To: legacyusergroup@LegacyUsers.com Subject: Re: [LegacyUG] keyboard shortcut for the Index (not Name List) I know this must be a really dumb question, but once you use the AltF6 key to get to the index, which key combo takes one back to the family view? Jane On 3/11/2014 10:31 PM, Dee wrote: Thank you also to Ron for those missing keys. And, on the back cover of the manual, there are more. . . . On Tue, Mar 11, 2014 at 7:09 PM, Ron Taylor doit4...@yahoo.com wrote: Brian, Those Alt-F1...F6 keys are not documented in the HelpShortcut Keys. Â Very helpful...thank you. Also, the single key command S is not documented in the HelpShortcut Keys under Family and Pedigree View. The single key command ? in Family and Pedigree View is great for all the shortcut key commands that are documented. Ron Taylor On Tuesday, March 11, 2014 7:50 PM, Dee deema...@gmail.com wrote: Brian, You're wonderful! This is just what I needed! Thank you! Dee On Tue, Mar 11, 2014 at 6:25 PM, Brian/Support br...@legacyfamilytree.com wrote: ALT-F1 through ALT-F6 switch between the tab views. Alt-F6 will give you Index View. Brian Customer Support Millennia Corporation br...@legacyfamilytree.com http://www.LegacyFamilyTree.com On 11/03/2014 9:02 PM, Dee wrote: Is there a keyboard shortcut in Legacy 8 for the Index? Not the Name List, please. Legacy 8 is great. Dee subscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Recording changes of residence
The current residence is added using the Address icon. Consider that as your current address book. Historical residences are added using the Residence event. I enter the street address in the Description field, date range in the date field and city, county, state and country in the location field, with any notes about this residence that you want to include. Sincerely, Sherry Technical Support Legacy Family Tree On Tue, Mar 11, 2014 at 7:43 PM, Roger Lamprey ro...@rogerlamprey.comwrote: I'm trying to get some ideas for recording changes of residence for an individual. Similarly, though not the same, how might we record knowledge that a person lived at address A in year Y? In Legacy's Master Event Definition List are some possible event names (Land, Property, Immigration, Emigration), though I don't quite like any of them for reflecting either a change of residence within a country or that we know the person lived at address A in a given year. The Census event would seem fine for indicating the latter based on a census, but that is too specific and is rather arbitrary just to handle knowledge of a person's location based just on a census source. I added a Residence event to the list, but I am not particularly happy about that as it doesn't address a move. Any good ideas for handling this? Am I missing something? Roger Lamprey Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] keyboard shortcut for the Index (not Name List)
Bob, Thank you very much. I thought i had tried them all, but apparently I missed that one. Jane On 3/11/2014 11:13 PM, Bob Austen wrote: Hi Jane, I’ll jump in here… With Legacy open there are six tabs across the top: Legacy Home, Family, Pedigree, Descendant, Chronology, Index. The six Alt-F1…F6 shortcuts represent those six tabs. To go to Family View (second tab) use Alt-F*2*, Index = Alt-F6. Bob A *From:*Jane Sarles [mailto:sarlesinsi...@gmail.com] *Sent:* Tuesday, March 11, 2014 7:47 PM *To:* legacyusergroup@LegacyUsers.com *Subject:* Re: [LegacyUG] keyboard shortcut for the Index (not Name List) I know this must be a really dumb question, but once you use the AltF6 key to get to the index, which key combo takes one back to the family view? Jane On 3/11/2014 10:31 PM, Dee wrote: Thank you also to Ron for those missing keys. And, on the back cover of the manual, there are more. . . . On Tue, Mar 11, 2014 at 7:09 PM, Ron Taylor doit4...@yahoo.com mailto:doit4...@yahoo.com wrote: Brian, Those Alt-F1...F6 keys are not documented in the HelpShortcut Keys. Â Very helpful...thank you. Also, the single key command S is not documented in the HelpShortcut Keys under Family and Pedigree View. The single key command ? in Family and Pedigree View is great for all the shortcut key commands that are documented. Ron Taylor On Tuesday, March 11, 2014 7:50 PM, Dee deema...@gmail.com mailto:deema...@gmail.com wrote: Brian, You're wonderful! This is just what I needed! Thank you! Dee On Tue, Mar 11, 2014 at 6:25 PM, Brian/Support br...@legacyfamilytree.com mailto:br...@legacyfamilytree.com wrote: ALT-F1 through ALT-F6 switch between the tab views. Alt-F6 will give you Index View. Brian Customer Support Millennia Corporation br...@legacyfamilytree.com mailto:br...@legacyfamilytree.com http://www.LegacyFamilyTree.com http://www.legacyfamilytree.com/ On 11/03/2014 9:02 PM, Dee wrote: Is there a keyboard shortcut in Legacy 8 for the Index? Not the Name List, please. Legacy 8 is great. Dee subscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
[LegacyUG] Website Creation: Event Notes Privacy Brackets
I’ve just amended the Event notes for a particular event for my website, because of a complaint about privacy issues. It’s a Military Service event with date and place filled. I’ve amended the Notes with double brackets around the offending lines, but when I create the web pages the whole event disappears. I can do that with making the whole event “Private”. But I only wish to take out the so-called disputed statement and keep the title of the event and one sentence in the Notes. Any thoughts? Thank you Bryan Sent from Windows Mail Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] problem with Legacy 8, build 412 and up
A bolded name means it is on the Preferred Direct Line (when the last box in OptionsCustomize3.8 is checked). Look at the P column in Edit Children to see the + and * indicators that can appear left of a name (not to be confused with + on the right side of a name). Help filesSearchSiblings List explains What are those characters? which can also be reached with the Help button on the Edit Children window. Unchecking that option will un-bold the preferred direct line names. Apparently, the preferred direct line is stored somewhere in the database because if you again check the box, the names are bolded again without having to run ToolsSet Direct Line. I just tried both ways and the current release seems to function as expected. What is not functioning yet is the bolding in Descendant tab. Also, the preferred direct line is not bolded in the Spouse/Child or Siblings Lists in Pedigree tab but they do have the left side +. I believe that the preferred direct line names should only be bolded on all screens when the option is checked and they should have the left side + when the option is unchecked. Another check box is probably needed in 3.8 so that one box would be similar to what it is now Bold direct-line children names in lists and a box Show plus sign left of direct-line children names in lists. Then the user could select none, bold, +, or both. The important thing is that the notation would be consistent across all displays. Ron Taylor On Tuesday, March 11, 2014 9:10 AM, Kurt Kneeland kurt-kneel...@sbcglobal.net wrote: If you did a Set Direct Line As Preferred, then those names will be bold. Seems to me I’ve seen other messages commenting that there is no way to undo this. You might be able to get around it by creating a new unlinked dummy person, do a Set Direct Line as Preferred on that person, and then delete it. From:Chuck Sechler [mailto:csech...@att.net] Sent: Thursday, March 06, 2014 6:18 PM To: legacyusergroup@LegacyUsers.com Subject: [LegacyUG] problem with Legacy 8, build 412 and up I believe that since I updated to build 412 I have started seeing Children in the Family file listed with bolded names. I have been all through option 3.8 in the customization to no avail. I set Use + at the end of name to indicate spouses and continued lines. the other 3.8 options are unchecked, which can cause bolding. However, some of the names in the Children lists still come out bolded, with no seeming rhyme or reason as to why they do. I have wiped out version 8 and reinstalled , to no avail. I have tried resetting options to Legacy default, to no avail. I do not believe this was occurring before build 412. Any ideas? Thanks. Chuck. Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] A simple place-name question
By your reasoning (and apparently most traditional genealogists), what would be the location description for the place we call Boston, Massachusetts today if the event happened in 1690? or for New Orleans, Louisiana in 1802? or for Jacksonville, Florida in 1720? After working for many years with master code databases, I am very familiar with the ability to have a current code/location easily converted to how it may have been designated in some other time frame or language. A good example is how AniMap works. In the university files, it is necessary to have codes that represent various things. The code 26782 might be interpreted as Intermediate Math from 1965 thru 1973 and then the same code meant German Literature from 1974 to 1992. By combining the code with the date the computer can easily and quickly report the correct interpretation. The same logic is done regularly with locations. It is much easier and usually more accurate to specify the current location than to try to determine the right designation for a long past time frame. I believe that computer programming will evolve that will resolve this genealogical school of thought difference in much the same way that it is used in industry and education. Ron Taylor On Tuesday, March 11, 2014 9:22 PM, Roger Lamprey ro...@rogerlamprey.com wrote: When recording the place of an event, we should record it as it was at the time of the event, rather than as it would be referred to today. In that case, how should we refer to the American Colonies as a group for events taking place before the United States became a nation (maybe just American Colonies?). And, at what date did the crossover from that name to United States take place? Thanks! Roger Lamprey Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp