[NTG-context] new options for \setupinteractionscreen
Dear ConTeXters,
for PDF document one can set /PageLayout. It is a mode in which reader
shows us pages (Single, Continous, Facing, ...). in ConTeXt one can set
\setupinteractionscreen[option=doublesided]
which set layout /TwoColumnRight (understand two facing continuous pages
with odd pages on the right side). Since PDF 1.5 there is a possibility
to set 3 more layouts:
/TwoColumnLeft
/TwoPageRight
/TwoPageLeft
I poropose to incorporate next lines of code to sources to enable
setting of these layouts
% double=facing, column=continuous, right|left=where odd page
\setupinteractionscreen[
option=doublecolumnleft,
option=doublepageright,
option=doublepageleft,
option=doublecolumnright, % for compatibility = doublesided
option=doublecolumn, % for simplicity = doublecolumnright
option=doublepage,% for simplicity = doublepageright
]
These names are derrived from curren naming convention (doublesided) and
PDF names. May be we can use more intuitive variants:
option=facingright,
option=facingleft,
option=facingcontinuousright,
option=facingcontinuousleft,
Sorry I know English and Czech interface only and for FDF driver. May be
somebody add more.
Vit
Proposal:
-
% mult-con.tex
\startvariablesdutch english
germanczech
italian romanian
french
doublecolumnright: doublecolumnright doublecolumnright
doublecolumnright dvasloupcevpravo
doublecolumnright doublecolumnright
doublecolumnright
doublecolumnleft: doublecolumnleft doublecolumnleft
doublecolumnleft dvasloupcevlevo
doublecolumnleft doublecolumnleft
doublecolumnleft
doublecolumn: doublecolumn doublecolumn
doublecolumn dvasloupce
doublecolumn doublecolumn
doublecolumn
doublepageright: doublepageright doublepageright
doublepageright dvestrankyvpravo
doublepageright doublepageright
doublepageright
doublepageleft: doublepageleftdoublepageleft
doublepageleftdvestrankyvlevo
doublepageleftdoublepageleft
doublepageleft
doublepage: doublepagedoublepage
doublepagedvestranky
doublepagedoublepage
doublepage
\stopvariables
% core-int
\setvalue{\??sc\c!option\v!doublecolumnright}{4} % compatibility
\setvalue{\??sc\c!option\v!doublecolumnleft}{5} % new
\setvalue{\??sc\c!option\v!doublepageright}{6} % new
\setvalue{\??sc\c!option\v!doublepageleft}{7}% new
\setvalue{\??sc\c!option\v!doublecolumn}{4} % compatibility
\setvalue{\??sc\c!option\v!doublepage}{6}% compatibility
% spec-fdf.tex
\def\doPDFsetupscreen#1#2#3#4#5#6% watch the extra argument
{\bgroup
\xdef\currentPDFpagemode
{\ifnum#6=4
/PageLayout /TwoColumnRight
\else\ifnum#6=5
/PageLayout /TwoColumnLeft
\else\ifnum#6=6
/PageLayout /TwoPageRight
\else\ifnum#6=7
/PageLayout /TwoPageLeft
\else
/PageMode \ifcase#6
/UseNone\or/FullScreen\or/UseOutlines\else/UseNone\fi
\fi\fi\fi\fi}%
\xdef\currentPDFviewerprefs % space after #6 needed, else \relax
{\ifcase#6 \or\or\else /ViewerPreferences << /FitWindow true >>\fi}%
\egroup}
___
If your question is of interest to others as well, please add an entry to the
Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : https://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___
Re: [NTG-context] new options for \setupinteractionscreen
Hans Hagen wrote:
> Vit Zyka wrote:
>> Dear ConTeXters,
>>
>> for PDF document one can set /PageLayout. It is a mode in which reader
>> shows us pages (Single, Continous, Facing, ...). in ConTeXt one can set
>>
>>\setupinteractionscreen[option=doublesided]
>>
>> which set layout /TwoColumnRight (understand two facing continuous
>> pages with odd pages on the right side). Since PDF 1.5 there is a
>> possibility to set 3 more layouts:
>>
>>/TwoColumnLeft
>>/TwoPageRight
>>/TwoPageLeft
>>
>> I poropose to incorporate next lines of code to sources to enable
>> setting of these layouts
>>
>>% double=facing, column=continuous, right|left=where odd page
>>\setupinteractionscreen[
>> option=doublecolumnleft,
>> option=doublepageright,
>> option=doublepageleft,
>> option=doublecolumnright, % for compatibility = doublesided
>> option=doublecolumn, % for simplicity = doublecolumnright
>> option=doublepage,% for simplicity = doublepageright
>>]
>
> another option is (less new keywords)
>
> option={doublesided,left,continue} % any order
Much cleverer! But in this case there is a backward incompatibility
{doublesided,continue} = current {doublesided}
{doublesided} = would mean NONcontinuous
Actually whenever I wanted to use facing layout, I wanted NONcontinuous.
So I do not bother with this backward incompatibility. May be somebody
else do?
Vit
>> These names are derrived from curren naming convention (doublesided)
>> and PDF names. May be we can use more intuitive variants:
>> option=facingright,
>> option=facingleft,
>> option=facingcontinuousright,
>> option=facingcontinuousleft,
>>
>> Sorry I know English and Czech interface only and for FDF driver. May
>> be somebody add more.
>>
>> Vit
>>
>> Proposal:
>> -
>> % mult-con.tex
>> \startvariablesdutch english
>> germanczech
>> italian romanian
>> french
>>
>> doublecolumnright: doublecolumnright doublecolumnright
>> doublecolumnright dvasloupcevpravo
>> doublecolumnright doublecolumnright
>> doublecolumnright
>> doublecolumnleft: doublecolumnleft doublecolumnleft
>> doublecolumnleft dvasloupcevlevo
>> doublecolumnleft doublecolumnleft
>> doublecolumnleft
>> doublecolumn: doublecolumn doublecolumn
>> doublecolumn dvasloupce
>> doublecolumn doublecolumn
>> doublecolumn
>>doublepageright: doublepageright doublepageright
>> doublepageright dvestrankyvpravo
>> doublepageright doublepageright
>> doublepageright
>> doublepageleft: doublepageleftdoublepageleft
>> doublepageleftdvestrankyvlevo
>> doublepageleftdoublepageleft
>> doublepageleft
>> doublepage: doublepagedoublepage
>> doublepagedvestranky
>> doublepagedoublepage
>> doublepage
>> \stopvariables
>>
>> % core-int
>>\setvalue{\??sc\c!option\v!doublecolumnright}{4} % compatibility
>>\setvalue{\??sc\c!option\v!doublecolumnleft}{5} % new
>>\setvalue{\??sc\c!option\v!doublepageright}{6} % new
>>\setvalue{\??sc\c!option\v!doublepageleft}{7}% new
>>\setvalue{\??sc\c!option\v!doublecolumn}{4} % compatibility
>>\setvalue{\??sc\c!option\v!doublepage}{6}% compatibility
>>
>> % spec-fdf.tex
>> \def\doPDFsetupscreen#1#2#3#4#5#6% watch the extra argument
>>{\bgroup
>>\xdef\currentPDFpagemode
>> {\ifnum#6=4
>> /PageLayout /TwoColumnRight
>>\else\ifnum#6=5
>> /PageLayout /TwoColumnLeft
>>\else\ifnum#6=6
>&g
[NTG-context] fix of Kurier typefaces
Hi, there is a miscorrespondence between names of Kurier fonts (in type-one.tex and type-syn.tex) - missing 'Regular' or '-'. I propose to fix type-syn.tex as follows. Vit --- \starttypescript [sans] [kurier-light] [name] \setups[font:fallback:sans] \definefontsynonym [Sans] [Kurier-Light-Regular] %<- \definefontsynonym [SansItalic] [Kurier-Light-Italic] %<- \definefontsynonym [SansBold] [Kurier-Medium-Regular] %<- \definefontsynonym [SansBoldItalic] [Kurier-Medium-Italic] %<- \stoptypescript \starttypescript [sans] [kurier] [name] \setups[font:fallback:sans] \definefontsynonym [Sans] [Kurier-Regular] \definefontsynonym [SansItalic] [Kurier-Regular-Italic] %<- \definefontsynonym [SansBold] [Kurier-Bold-Regular] %<- \definefontsynonym [SansBoldItalic] [Kurier-Bold-Italic] %<- \stoptypescript \starttypescript [sans] [kurier-medium] [name] \setups[font:fallback:sans] \definefontsynonym [Sans] [Kurier-Medium-Regular] %<- \definefontsynonym [SansItalic] [Kurier-Medium-Italic] %<- \definefontsynonym [SansBold] [Kurier-Heavy-Regular] %<- \definefontsynonym [SansBoldItalic] [Kurier-Heavy-Italic] %<- \stoptypescript \starttypescript [math] [kurier-light] [name] \definefontsynonym [MathRoman] [Kurier-Math-Letters-Light] \definefontsynonym [MathItalic][Kurier-Math-Letters-Light-Italic] %<- \definefontsynonym [MathSymbol][Kurier-Math-Symbols-Light] \definefontsynonym [MathExtension] [Kurier-Math-Extension-Light] \stoptypescript \starttypescript [math] [kurier] [name] \definefontsynonym [MathRoman] [Kurier-Math-Letters-Regular] \definefontsynonym [MathItalic] [Kurier-Math-Letters-Regular-Italic] %<- \definefontsynonym [MathSymbol][Kurier-Math-Symbols-Regular] \definefontsynonym [MathExtension] [Kurier-Math-Extension-Regular] \stoptypescript \starttypescript [math] [kurier-medium] [name] \definefontsynonym [MathRoman] [Kurier-Math-Letters-Medium] \definefontsynonym [MathItalic] [Kurier-Math-Letters-Medium-Italic] %<- \definefontsynonym [MathSymbol][Kurier-Math-Symbols-Medium] \definefontsynonym [MathExtension] [Kurier-Math-Extension-Medium] \stoptypescript -- ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : https://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
Re: [NTG-context] Problems with Natural Tables
Hans Hagen wrote: Adam Duck wrote: Eckhart Guthöhrlein <[EMAIL PROTECTED]> writes: Am Sonntag, den 14.08.2005, 17:17 +0200 schrieb Adam Duck: - how do I set the spacing between a vertical line (between two columns) and the text inside that columns? I already used "framedoffest=-3pt", but the output is unacceptable. Spacing is a weak point of natural tables. Afaik, there is no good way to tune spacing. I would try using dummy colums like \bTD[width=1em]\eTD. OK, That sounds reasonable. I'll try that. On the other hand this means many \bTD\eTD ... but one can write a macro for that, I think. a next release will support: \input core-ntb-new.tex \starttext \showframe \setupTABLE[c][1][distance=2em] \setupTABLE[c][2][distance=3em] I was looking for core-ntb-new.tex or 'distance' in current beta core-ntb.tex but have not been successful. Please, where I can find it? Thanks Vit \bTABLE \bTR \bTD test \eTD \bTD test \eTD \bTD test \eTD \eTR \bTR \bTD[nx=2] test \eTD \bTD test \eTD \eTR \bTR \bTD test \eTD \bTD[nx=2] test \eTD \eTR \eTABLE \bTABLE[option=stretch] \bTR \bTD test \eTD \bTD test \eTD \bTD test \eTD \eTR \bTR \bTD[nx=2] test \eTD \bTD test \eTD \eTR \bTR \bTD test \eTD \bTD[nx=2] test \eTD \eTR \eTABLE \stoptext ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
[Fwd: Re: [NTG-context] Problems with Natural Tables]
Hello Hans, (I guess you are the only person who can specify your previous answer), so please, is the file 'core-ntb-new.tex' somewhere available? Actually what I want. I have plenty of natural tables. If I want to make closer interline space between table lines the only way I know is to make smaller value of offset param. But after that, columns are too close together (framed object as a core of natural table does not distinguish between vertical and horizontal offsets). So bellow mentioned \setupTABLE[c][1][distance=2em] would be nice solution. So ones more, is the new code available? Thank you in advance for the answer. Vit Hans Hagen wrote: Adam Duck wrote: Eckhart Guthöhrlein <[EMAIL PROTECTED]> writes: Am Sonntag, den 14.08.2005, 17:17 +0200 schrieb Adam Duck: - how do I set the spacing between a vertical line (between two columns) and the text inside that columns? I already used "framedoffest=-3pt", but the output is unacceptable. Spacing is a weak point of natural tables. Afaik, there is no good way to tune spacing. I would try using dummy colums like \bTD[width=1em]\eTD. OK, That sounds reasonable. I'll try that. On the other hand this means many \bTD\eTD ... but one can write a macro for that, I think. a next release will support: \input core-ntb-new.tex \starttext \showframe \setupTABLE[c][1][distance=2em] \setupTABLE[c][2][distance=3em] I was looking for core-ntb-new.tex or 'distance' in current beta core-ntb.tex but have not been successful. Please, where I can find it? Thanks Vit \bTABLE \bTR \bTD test \eTD \bTD test \eTD \bTD test \eTD \eTR \bTR \bTD[nx=2] test \eTD \bTD test \eTD \eTR \bTR \bTD test \eTD \bTD[nx=2] test \eTD \eTR \eTABLE \bTABLE[option=stretch] \bTR \bTD test \eTD \bTD test \eTD \bTD test \eTD \eTR \bTR \bTD[nx=2] test \eTD \bTD test \eTD \eTR \bTR \bTD test \eTD \bTD[nx=2] test \eTD \eTR \eTABLE \stoptext ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] interline space in setupparagraphs
Peter Rolf wrote: Gerben Wierda wrote: On 27 Oct 2005, at 18:59, Peter Rolf wrote: Hi Gerben, Gerben Wierda wrote: I have: \setupinterlinespace[medium] \setupinterlinespace[line=\dimexpr1.25\bodyfontsize\relax] That works. But why? And does this relate to the fact that textrule spacing as done normally is not used inside the paragraph (see other thread)? I was also surprised, that a bold variant of the same size is handled differently. The interlinespace is calculated each time you change the body font (so in your case at the start of the columns). Maybe bold adds some extra to the line factor? Better ask the font wizzards... By default, the interlinespace is set to 2.8ex. But ex unit may be dependent to the font variant (tf, bf, ...). So setting fix distance or distance based on \bodyfontsize solves the problem. vit And this works, because the \bodyfontsize is equal for both variants. Using only the line-parameter is maybe not enough, so it's safer to change it after calling \setupinterlinespace[medium]. Peter G ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context -- === Ing. Vít Zýka, Ph.D. TYPOkvítek database publishing databazove publikovani data maintaining and typesetting in typographic quality priprava dat a jejich sazba v typograficke kvalite tel.: (+420) 777 198 189 www: http://typokvitek.com === ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] Problems with Natural Tables
Vit Zyka wrote:
> ...
so please, is the file 'core-ntb-new.tex' somewhere available?
Solution of my own question, for who is interesting.
Description:
The next patch enables to define intercolumn gaps in Natural Table
(bTABLE...eTABLE) environment.
Features:
- one can distinguish the amounts of first (colsepfirst), inner
(colsepbetween), and last (colseplast) gaps.
- patch operates for both 'fit' or 'stretch' table options.
- gaps has no 'background' you have to use external one.
Example:
http://typokvitek.com/tmp/nattab-colskip.pdf
Usage:
\bTABLE[colsepbetween=2cm,colsepfirst=.3cm,colseplast=.5cm]
\bTR
\bTD A\eTD\bTD B\eTD\bTD C\eTD
\eTR
\eTABLE
Enjoy it,
vit
Patch:
---
% suppressing spurious space from setupTABLE
\let\DosetupTABLE=\setupTABLE
\def\setupTABLE[#1][#2][#3]{\DosetupTABLE[#1][#2][#3]\ignorespaces}
% new bTABLE options : colsepbetween, colsepfirst, colseplast
\def\nexttblcol
{\doglobal\increment\colTBL\hskip\tbltblcolsepbetween\hbox{}&} % VZ
\def\begintblrow
{\noalign
{\doglobal\increment\rowTBL
\doglobal\newcounter\colTBL}%
\nexttblcol
\hskip\tbltblcolsepfirst\hskip-\tbltblcolsepbetween} % VZ
\unprotected\def\endtblrow
{\hskip-\tbltblcolsepbetween\hskip\tbltblcolseplast\hbox{}% VZ
\crcr
\noalign
{\nointerlineskip
\allowbreak
\bgroup % protect local vars
\@@tblsplitafter
\egroup
\bgroup % protect local vars
\increment\rowTBL\relax
\ifnum\rowTBL>\noftblhdnxlines\relax
\ifnum\rowTBL<\maximumrow\relax
\doifsomething\tbltblspaceinbetween{\blank[\tbltblspaceinbetween]}%
\fi
\fi
\egroup}}
\unprotected\def\endTBL
{\appendtoks
\endtbl
\to\tbltoks
\setbox\scratchbox\hbox
{\localframed
[\@@tbl\@@tbl]
[\c!frame=\v!off,\c!background=,\c!align=\v!no]
{\strut}}%
\edef\minimalcellheight{\the\ht\scratchbox}%
\dorecurse\maximumcol
{\settblaut\recurselevel\!!zeropoint % \zeropoint etc
% new
\let\xcol\recurselevel
\dorecurse\maximumrow
{\settblwd \recurselevel\xcol\!!zeropoint
\settblht \recurselevel\xcol\!!zeropoint}%
% till here
\settblwid\recurselevel\!!zeropoint}%
\dorecurse\maximumrow
{\settblhei\recurselevel\maxdimen}%
\chardef\TBLpass\plusone
\let\handleTBLcell\dohandleTBLcellA
\def\makeTBL##1##2%
{\gettbltxt{##1}{##2}}%
\def\inTBLcell##1##2%
{\ExpandBothAfter\doifinsetelse\localwidth{\v!fit,\v!broad} % user set
{}
{\scratchdimen\gettblaut\colTBL\relax
\ifdim\localwidth>\scratchdimen
\settblaut\colTBL\localwidth
\fi}}%
\setbox0\vbox{\trialtypesettingtrue \the\tbltoks}%
\ifautoTBLspread
% experimental, stretch non fixed cells to \hsize
\checktblwidthsone % trial run
\checktblwidthstwo % real run
\stretchtblwidths
\let\handleTBLcell\dohandleTBLcellB
\setbox\scratchbox\vbox{\trialtypesettingtrue \the\tbltoks}%
\else\ifdim\wd0>\hsize
\ifautoTBLhsize
\checktblwidthsone % trial run
\checktblwidthstwo % real run
\let\handleTBLcell\dohandleTBLcellB
\setbox\scratchbox\vbox{\trialtypesettingtrue \the\tbltoks}%
\fi
\else\ifautoTBLrowspan\ifnum\maximumrowspan>1 % max ?
% added jan 2002 because nx=* did no longer work
\checktblwidthsone % trial run
\checktblwidthstwo % real run
%
\let\handleTBLcell\dohandleTBLcellC
\setbox\scratchbox\vbox{\trialtypesettingtrue \the\tbltoks}%
\fi\fi\fi\fi
\let\handleTBLcell\dohandleTBLcellD
\chardef\TBLpass\plustwo
\def\makeTBL##1##2% meer in cellD
{\dimen2\zeropoint
\globalpushmacro\colTBL
\dorecurse{\gettblcol{##1}{##2}}
{\advance\dimen2 \gettblwid\colTBL
\advance\dimen2 \tbltblcolsepbetween % VZ
\increment\colTBL}%
\advance\dimen2 -\tbltblcolsepbetween % VZ
\edef\widthTBL{\the\dimen2}%
\globalpopmacro\colTBL
\setbox\scratchbox\hbox{\gettbltxt{##1}{##2}}%
\settblht{##1}{##2}{\the\ht\scratchbox}%
\settblwd{##1}{##2}{\the\wd\scratchbox}%
\ifdim\ht\scratchbox>\gettblhei{##1}\relax
\settblhei{##1}{\the\ht\scratchbox}%
\fi}%
\setbox\scratchbox\vbox{\trialtypesettingtrue \the\tbltoks}%
\checktblheightsone
\checktblheightstwo
\let\handleTBLcell\dohandleTBLcellE
\chardef\TBLpass\plusthree
\def\makeTBL##1##2%
{% height
\globalpushmacro\rowTBL
\scratchdimen\zeropoint
\def\rowTBL{##1}%
\ifnum\gettblcol{##1}{##2}=\maximumcol\relax
% case: nc=maxcolumns
\else
\dorecurse{\gettblrow{##1}{##2}}
{\advance\scratchdimen \gettblhei\rowTBL
\increment\rowTBL}%
\ifdim\scratchdimen<\gettblht{##1}{##2}\relax
\scratchdimen\gettblht{##1}{##2}
Re: [NTG-context] Bug / feature request tracking
Thomas A. Schmitz wrote:
Taco,
great to have your bug collector, and let's hope it'll be a bug
squasher before long...
I had submitted a couple of bugs and feature requests for the index
command that don't seem to be resolved and which didn't make it to your
list. I'd say they are fairly critical because they will really mess up
index generation:
1. index ranges inserted via \startregister[index] will gobble all
other entries for the term;
2. \seeindex gives an error and will foul up the .tui file when
processed with newtexexec;
3. again with newtexexec: capital letters at the beginning of terms are
disregarded for the index, thus Taco will be sorted under "a."
Yes, I agree.
4. and a feature request: it would be good to have some formatting
options like LaTeX makeidx offers: \index{keyword|textit} will produce
a page-number in italics in the register. That would be immensely
useful to produce a structured index.
This is already present in the ConTeXt even in more general way then in
the LaTeX is. More info in the manual.
vit
All best
Thomas
On Nov 7, 2005, at 6:50 PM, Taco Hoekwater wrote:
Hi all,
Some of you may be aware of the fact that there is a bug /
feature request tracker for ConTeXt. The URL is:
http://context.literatesolutions.com/collector
I have to do a call-to-arms for the people that have made
feature requests and / or found bugs in the past few months,
especially if the extension /solution has not been included
in the latest distribution (2005.10.27).
Will you all please have a look at the current list, and see
if I have added your item(s) already?
I have a rather large archive of context-related email (because
I let it slip for a while), and I fear that may have missed
some extant bugs. This is quite important, because if it is not
in the list, it is much less likely to get fixed.
Greetings,
Taco
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] Mini-survey: What do you do with ConTeXt?
Taco Hoekwater wrote: Hi all, For the next issue of the ntg's Maps journal, Hans and I believe it would be nice to publish the collected responses to this simple question: What do you do with ConTeXT? - proceedings from individual PDFs, - presentations, - posters, - logos, visiting cards, - manual (HTML and PDF form from XML source), - personal electronic travel-journal (http://typokvitek.com/nzs you can see evolution of my ConTeXt skills) - booklet with very complex layout (sometimes seems to me over my ConTeXt skills) with two-column, margin, many, many floats, balancing, sorting, in Czech, ... I will write some experience with this -- if I will finnish it and survive two times postponned deadline... As a 'clever plain' with METAPOST, layers, and overlayes the ConTeXt it is excelent! As a 'all-in-one key-val LaTeX' it is nice and uniform. And as a tool to solve 'so far TeX dreams' it is problematic: without deadlines it is a funny game, with them a pain. In every point, thanks to authors for Him. vit ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] Problems with Natural Tables
Hans Hagen wrote: Vit Zyka wrote: Vit Zyka wrote: > ... so please, is the file 'core-ntb-new.tex' somewhere available? i merged the 'core-ntb-new.tex' code into the main file Solution of my own question, for who is interesting. Description: The next patch enables to define intercolumn gaps in Natural Table (bTABLE...eTABLE) environment. I added your patches, but renamed the keys: Thanks, renaming makes sence. vit ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] Index
Hans Hagen wrote:
Thomas A. Schmitz wrote:
... it's still missing a few features (I don't think it can
post-process pdf-files yet) and has a few buglets...
it should at least i remember writing some code -)
Here is an old example:
\defineregister[Name][Names]
\setupregister[Name][pagestyle=\it]
\setupregister[Name][bf][pagestyle=\bf]
\starttext
Names:
\Name[bf::]{Hans}
\Name{Taco}
\startregister[Name][bf::]{Patrick}
\page[yes]
\Name{Hans}
\stopregister[Name][bf::]{Patrick}
\page[yes]
\Name{Patrick}
\placeregister[Name]
\stoptext
--
Regrettably, I have now no time to install and check the new version of
newtexexec.rb, so perhaps it is already done. Please, for quick check
focus on 'Patrick' entry, it should have "1--2, 3" page numbers.
Or more complex example:
\defineregister[Name][Names]
\setupregister[Name]
\setupregister[Name][bf][pagestyle=\bf]
\starttext
Names:
\Name{Patrick}
\Name[bf::]{Hans}
\Name{Taco}
\startregister[Name][bf::]{Patrick}
\page[yes]
\Name{Patrick}
\page[yes]
\Name{Hans}
\stopregister[Name][bf::]{Patrick}
\placeregister[Name]
\stoptext
--
Possible variants:
1) Patrick 1, 2, {\bf 1--3}
2) Patrick {\bf 1--3}, 1, 2
3) Patrick 1--2, {\bf 1--3}
4) Patrick {\bf 1--3}, 1--2
in case of variants 1 v. 2 and 3 v. 4 I am not sure how the categories
'empty_string' and "bf" are sorted. But it does not matter since user
can set any category name.
variants 3, 4 should be set if some register option (coupling?) is set on
vit
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
[NTG-context] marking in columnset
Dear ConTeXters,
several kind of marking variants (first, last, both, ...) works
perfectly in standard one-column layout:
\definemarking[M]
\startsetups S
default=(\getmarking[M])~
first=(\getmarking[M][first])~
last=(\getmarking[M][last])~
previous=(\getmarking[M][previous])~
both=(\getmarking[M][both])~
all=(\getmarking[M][all])~
current=(\getmarking[M][current])
\stopsetups
\setupheadertexts[text]
[\setups{S}][]
[\setups{S}][]
\setuppagenumbering[location=footer]
\starttext
\startbuffer
\section{Knuth}
\marking[M]{k1}\marking[M]{k2}
\input knuth
\section{Zapf}
\marking[M]{z}
\input zapf
\stopbuffer
\dorecurse{10}{\getbuffer}
\stoptext
---
If I try the same example in columnset layout, only last variant works
as expected:
---
\definemarking[M]
\startsetups S
default=(\getmarking[M])~
first=(\getmarking[M][first])~
last=(\getmarking[M][last])~
previous=(\getmarking[M][previous])~
both=(\getmarking[M][both])~
all=(\getmarking[M][all])~
current=(\getmarking[M][current])
\stopsetups
\setupheadertexts[text]
[\setups{S}][]
[\setups{S}][]
\setuppagenumbering[location=none]
\definecolumnset[C][n=3]
\starttext
\startbuffer
\section{Knuth}
\marking[M]{k1}\marking[M]{k2}
\input knuth
\section{Zapf}
\marking[M]{z}
\input zapf
\stopbuffer
\startcolumnset[C]
\dorecurse{10}{\getbuffer}
\stopcolumnset
\stoptext
---
(Focus on page 1 and 4)
Is there any idea how to fix this?
Vit
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] marking in columnset
Hans Hagen wrote: Vit Zyka wrote: (Focus on page 1 and 4) Is there any idea how to fix this? afaiks, what you get is the markings of the last column so, it looks like i have to fix something Hans Yes, you are right. I check it on a real doc. And if no mark sign is in the last col, then marks from previous col(s) is taken. It would be a great news if you succeed to fix it. I cross my fingers. Vit ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] marking in columnset
Hans Hagen wrote: Vit Zyka wrote: It would be a great news if you succeed to fix it. I cross my fingers. well, it's actually relatively easy to make that (works on my machine now) but as always .. how to interface best -) and ... of course it takes some time to find all points where synchronization has to take place Hans Understand. I appreciate if upgrading the whole context distro will not be needed. I am afraid of something works differently - and there is no time to fix it. So some patches/file exchanges are feasible? Vit ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] marking in columnset
Hans Hagen wrote: Vit Zyka wrote: Hans Hagen wrote: Vit Zyka wrote: It would be a great news if you succeed to fix it. I cross my fingers. well, it's actually relatively easy to make that (works on my machine now) but as always .. how to interface best -) and ... of course it takes some time to find all points where synchronization has to take place Hans Understand. I appreciate if upgrading the whole context distro will not be needed. I am afraid of something works differently - and there is no time to fix it. So some patches/file exchanges are feasible? actually, the patch i sent you off-list is not that dangerous because (1) it is written on top of the untouched low level mark handler (2) it leaves the normal marks untouched not at all: \getmarking[A][all] does not swallow [A] so it will end up in the distribution if you find no flaws as usual the problem is in documenting it (i.e. when adding new things for you others may complain that the manual is way behind -) What does it mean \global\mofcolumns\plusone inside of setups in your test example? Is it really needed? I put the info to tex-show (getmarking). I reminds me there are many items missing in the tex-show, the list is on the wiky - columnsets are among them. vit ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] marking in columnset
Hans Hagen wrote: Vit Zyka wrote: It would be a great news if you succeed to fix it. I cross my fingers. ok, you can uncross them; see separate mail Hans All right, I read this parallel message just now... Perhaps due to I was working with crossing fingers all the time ;-) vit ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] beginners manual
Hans Hagen wrote: Hi, I 'reorganized' (split) the beginners manual and put it in svn, so anyone who is willing to translate can check out a copy. I didn't yet change anything (only the file structure etc) and the styles need a cleanup (more modern setup). Because each chapter now has its own file, we can (as suggested on this list) edit piecewise. Don't start yet. First we need to add/remove things and rewrite chapters. But you can try to compile the file. Hans Hello, I got unexpected positive responce to idea of beginners manual translation on Saturday's Czech/Slovak TUG meeting. The small working group of 5 people was establish there. Nobody but me has context experience now, but I think it is not a serious drawback for translating. There was an interest (when the work will be finnished) to publish it in the Czechoslovac TeX Bulletin. I find only advantages for ConTeXt to do so, nevertheless I have to ask if such idea is welcomed. Vit ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
[NTG-context] shading box many times
Dear Metafun Wizards,
I have noticed some strange behaviour with box shading. It works OK
until some number of shadings. Please see example:
http://typokvitek.com/tmp/shade-many.pdf
Any idea for solving? Next not-minimal but small and illustrative
example can help.
Thanks in advance
Vit
\def\Log#1{%
def log(expr Xstart, Xstop)=
begingroup
save x, y, D, w, P;
pair D;
path P;
w := #1; w := w/2;
D := unitvector(Xstop-Xstart) rotated 90;
z1 = Xstart shifted (w*D);
z2 = Xstop shifted (w*D);
z3 = Xstop shifted (-w*D);
z4 = Xstart shifted (-w*D);
P := z1--z2{z2-z1}..{z4-z3}z3--z4{z4-z3}..{z2-z1}cycle;
P
endgroup
enddef;
}
\def\ObdobiFrame#1#2{%
def Rand(expr b) =
(.5pt*(floor(uniformdeviate (2*b+1))-b))
enddef;
path P;
xBor := \overlaylinewidth;
yBor := #1; yCor := 0pt;
x11 = x14 = 0;
x12 = x13 = \overlaywidth;
y11 = y31 = \overlayheight-yBor+yCor + Rand(2*#2);
y12 = y32 = \overlayheight-yBor+yCor + Rand(2*#2);
y13 = y33 = yBor + Rand(1*#2);
y14 = y34 = yBor + Rand(1*#2);
x21 = x31 = xBor + Rand(6*#2);
x24 = x34 = xBor + Rand(6*#2);
x22 = x32 = \overlaywidth-xBor + Rand(6*#2);
x23 = x33 = \overlaywidth-xBor + Rand(6*#2);
y21 = y22 = \overlayheight+yCor;
y23 = y24 = 0;
fill (z31--z32--z33--z34--cycle) withcolor \MPcolor{\overlaycolor};
P:= log(z11,z12); linear_shade(P,8,(1,1,1),(0,0,0)); draw P;
P:= log(z13,z14); linear_shade(P,8,(1,1,1),(0,0,0)); draw P;
P:= log(z21,z24); linear_shade(P,5,(1,1,1),(0,0,0)); draw P;
P:= log(z22,z23); linear_shade(P,5,(1,1,1),(0,0,0)); draw P;
}
\startuseMPgraphic{F}
\Log{2.5pt}%
\ObdobiFrame{3pt}{1}%
\stopuseMPgraphic
\defineoverlay[F][\uniqueMPgraphic{F}]
\defineframed[F]
[offset=2mm,rulethickness=.5mm,align={middle,lohi},strut=yes,
backgroundcolor=gray,background=F,frame=off,
]
\starttext
\noindent\dorecurse{256}{\F{\recurselevel} }
\stoptext
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] beginners manual
Hans Hagen wrote: Vit Zyka wrote: I got unexpected positive responce to idea of beginners manual translation on Saturday's Czech/Slovak TUG meeting. The small working group of 5 people was establish there. Nobody but me has context experience now, but I think it is not a serious drawback for translating. i don't know if david antos was present, but he knows his way around context and can be of help (given that he has time) He was not. Anybody's help will be welcomed, especially David... Vit ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] shading box many times
Hans Hagen wrote: Vit Zyka wrote: Dear Metafun Wizards, I have noticed some strange behaviour with box shading. It works OK until some number of shadings. Please see example: http://typokvitek.com/tmp/shade-many.pdf Any idea for solving? Next not-minimal but small and illustrative example can help. works ok here; since it concerns independent mp runs, i cannot imagine what goes wrong; mayeb a bad random numer; does your log say something? Hans Hmmm strange, the second similar result in last two days: wrong result also on wiki. My log says (whole log is attached) systems : randomizer starts with 981406338 Vit This is pdfeTeXk, Version 3.141592-1.21b-2.2 (Web2C 7.5.4) (format=cont-en 2005.11.24) 28 NOV 2005 13:56 entering extended mode \write18 enabled. %&-line parsing enabled. (c:/TeXLive/texmf-experim2/web2c/natural.tcx) **&cont-en shade-many.tex (./shade-many.tex ConTeXt ver: 2005.09.08 fmt: 2005.11.24 int: english mes: english language: language en is active system : cont-new loaded (c:/TeXLive/texmf-experim2/tex/context/base/cont-new.tex systems : beware: some patches loaded from cont-new.tex color : palette rollover is available ) system : cont-old loaded (c:/TeXLive/texmf-experim2/tex/context/base/cont-old.tex loading : Context Old Macros ) system : cont-fil loaded (c:/TeXLive/texmf-experim2/tex/context/base/cont-fil.tex loading : Context File Synonyms ) system : cont-sys loaded (c:/TeXLive/texmf-experim2/tex/context/user/cont-sys.tex (c:/TeXLive/texmf-experim2/tex/context/base/type-exa.tex) (c:/TeXLive/texmf-experim2/tex/context/base/type-syn.tex) (c:/TeXLive/texmf-experim2/tex/context/base/type-enc.tex) (c:/TeXLive/texmf-experim2/tex/context/base/type-dis.tex) (c:/TeXLive/texmf-experim2/tex/context/base/type-siz.tex) (c:/TeXLive/texmf-experim2/tex/context/base/type-map.tex) (c:/TeXLive/texmf-experim2/tex/context/base/type-spe.tex) (c:/TeXLive/texmf-experim2/tex/context/base/type-akb.tex)) bodyfont: 12pt rm is loaded language: patterns en->ec:ec->1->2:2 uk->ec:ec->2->2:2 de->texnansi:tex nansi->3->2:2 de->ec:ec->4->2:2 fr->texnansi:texnansi->5->2:2 fr->ec:ec->6->2:2 es->ec:ec->7->2:2 pt->texnansi:texnansi->8->2:2 pt->ec:ec->9->2:2 it->texnansi :texnansi->10->2:2 it->ec:ec->11->2:2 nl->texnansi:texnansi->12->2:2 nl->ec:ec- >13->2:2 cz->il2:il2->14->2:2 cz->ec:ec->15->2:2 sk->il2:il2->16->2:2 sk->ec:ec ->17->2:2 pl->pl0:pl0->18->2:2 pl->ec:ec->19->2:2 pl->qx:qx->20->2:2 loaded specials: tex,postscript,rokicki loaded \openout2 = `shade-many.tui'. system : shade-many.top loaded (./shade-many.top specials: loading definition file tpd (c:/TeXLive/texmf-experim2/tex/context/base/spec-tpd.tex specials: loading definition file fdf (c:/TeXLive/texmf-experim2/tex/context/base/spec-fdf.tex) specials: fdf loaded ) specials: fdf,tpd loaded ) \openout0 = `shade-many-mpgraph.mp'. \openout0 = `mpgraph.mp'. (./shade-many.tuo) (./shade-many.tuo) (./shade-many.tuo) (./shade-many.tuo) (./shade-many.tuo) (./shade-many.tuo) (./shade-many.tuo) (./shade-many.tuo) (./shade-many.tuo) (./shade-many.tuo) (./shade-many.tuo) (./shade-many.tuo) (./shade-many.tuo) systems : begin file shade-many at line 56 \openout5 = `shade-many-mpgraph.mp'. systems : randomizer starts with 981406338 [MP to PDF] (./shade-many-mpgraph.4000) [MP to PDF] (./shade-many-mpgraph.3999) [MP to PDF] (./shade-many-mpgraph.3998) [MP to PDF] (./shade-many-mpgraph.3997) [MP to PDF] (./shade-many-mpgraph.3996) [MP to PDF] (./shade-many-mpgraph.3995) [MP to PDF] (./shade-many-mpgraph.3994) [MP to PDF] (./shade-many-mpgraph.3993) [MP to PDF] (./shade-many-mpgraph.3992) [MP to PDF] (./shade-many-mpgraph.3991) [MP to PDF] (./shade-many-mpgraph.3990) [MP to PDF] (./shade-many-mpgraph.3989) [MP to PDF] (./shade-many-mpgraph.3988) [MP to PDF] (./shade-many-mpgraph.3987) [MP to PDF] (./shade-many-mpgraph.3986) [MP to PDF] (./shade-many-mpgraph.3985) [MP to PDF] (./shade-many-mpgraph.3984) [MP to PDF] (./shade-many-mpgraph.3983) [MP to PDF] (./shade-many-mpgraph.3982) [MP to PDF] (./shade-many-mpgraph.3981) [MP to PDF] (./shade-many-mpgraph.3980) [MP to PDF] (./shade-many-mpgraph.3979) [MP to PDF] (./shade-many-mpgraph.3978) [MP to PDF] (./shade-many-mpgraph.3977) [MP to PDF] (./shade-many-mpgraph.3976) [MP to PDF] (./shade-many-mpgraph.3975) [MP to PDF] (./shade-many-mpgraph.3974) [MP to PDF] (./shade-many-mpgraph.3973) [MP to PDF] (./shade-many-mpgraph.3972) [MP to PDF] (./shade-many-mpgraph.3971) [MP to PDF] (./shade-many-mpgraph.3970) [MP to PDF] (./shade-many-mpgraph.3969) [MP to PDF] (./shade-many-mpgraph.3968) [MP to PDF] (./shade-many-mpgraph.3967) [M
Re: [NTG-context] shading box many times
Taco Hoekwater wrote:
Hans Hagen wrote:
Vit Zyka wrote:
Dear Metafun Wizards,
I have noticed some strange behaviour with box shading. It works OK
until some number of shadings. Please see example:
http://typokvitek.com/tmp/shade-many.pdf
Any idea for solving? Next not-minimal but small and illustrative
example can help.
works ok here; since it concerns independent mp runs, i cannot imagine
what goes wrong; mayeb a bad random numer; does your log say something?
My results are the same as Vit's example: The last 9 items are
not shaded but have 3 black sides and 1 white one
(with \write18 disabled, using a single \jobname-mpgraph.mp)
I don't know what is going, but at least I can reproduce the problem.
I'm attaching an example wrong image.
Taco
A minimal version is here. It shows the randomization is not the reason.
Shade disappears at 989th shade.
===
\startuseMPgraphic{F}
def log(expr Xstart, Xstop)=
begingroup
save x, y, D, w, P;
pair D;
path P;
w := 2.5pt; w := w/2;
D := unitvector(Xstop-Xstart) rotated 90;
z1 = Xstart shifted (w*D);
z2 = Xstop shifted (w*D);
z3 = Xstop shifted (-w*D);
z4 = Xstart shifted (-w*D);
P := z1--z2{z2-z1}..{z4-z3}z3--z4{z4-z3}..{z2-z1}cycle;
P
endgroup
enddef;
path P;
x11 = 0;
x12 = \overlaywidth;
y11 = y12 = \overlayheight;
P:= log(z11,z12); linear_shade(P,8,(1,1,1),(0,0,0)); draw P;
\stopuseMPgraphic
\defineoverlay[F][\uniqueMPgraphic{F}]
\defineframed[F][offset=2mm,strut=yes,background=F,frame=off]
\starttext
\noindent\dorecurse{1000}{\F{\recurselevel} }
\stoptext
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] shading box many times
Hans Hagen wrote:
Taco Hoekwater wrote:
Hans Hagen wrote:
Vit Zyka wrote:
Dear Metafun Wizards,
I have noticed some strange behaviour with box shading. It works OK
until some number of shadings. Please see example:
http://typokvitek.com/tmp/shade-many.pdf
Any idea for solving? Next not-minimal but small and illustrative
example can help.
works ok here; since it concerns independent mp runs, i cannot
imagine what goes wrong; mayeb a bad random numer; does your log say
something?
My results are the same as Vit's example: The last 9 items are
not shaded but have 3 black sides and 1 white one
(with \write18 disabled, using a single \jobname-mpgraph.mp)
I don't know what is going, but at least I can reproduce the problem.
it's related to the fact that there can be 1000 specials only (this
/1000 in mp-spec)
if you add:
\def\MPrgbnumber#1{\expandafter\doMPrgbnumber#1.0\relax}
\def\doMPrgbnumber#1.#2#3#4#5#6\relax{#2#3#4#5}
\startMPinclusions
_special_div_ := 1 ;
\stopMPinclusions
to the file, and change all 1000's in mp-spec.tex into _special_div_ it
works ok; so, the question (for taco is): does mp have the right
Really? Hmmm, not for me. I have got the graphics with flat color per
picture; every picture in the sequence has lighter and lighter color
(starting from black). (After performing your instructions in the
mp-spec.mp and refreshing metafun.mem.)
--
\def\MPrgbnumber#1{\expandafter\doMPrgbnumber#1.0\relax}
\def\doMPrgbnumber#1.#2#3#4#5#6\relax{#2#3#4#5}
\startMPinclusions
_special_div_ := 1 ;
\stopMPinclusions
\startuseMPgraphic{F}
def log(expr Xstart, Xstop)=
begingroup
save x, y, D, w, P;
pair D;
path P;
w := 2.5pt; w := w/2;
D := unitvector(Xstop-Xstart) rotated 90;
z1 = Xstart shifted (w*D);
z2 = Xstop shifted (w*D);
z3 = Xstop shifted (-w*D);
z4 = Xstart shifted (-w*D);
P := z1--z2{z2-z1}..{z4-z3}z3--z4{z4-z3}..{z2-z1}cycle;
P
endgroup
enddef;
path P;
x11 = 0;
x12 = \overlaywidth;
y11 = y12 = \overlayheight;
P:= log(z11,z12); linear_shade(P,8,(1,1,1),(0,0,0)); draw P;
\stopuseMPgraphic
\defineoverlay[F][\uniqueMPgraphic{F}]
\defineframed[F][offset=2mm,strut=yes,background=F,frame=off]
\starttext
\noindent\dorecurse{1000}{\F{\recurselevel} }
\stoptext
--
precission (it looks ok to me, unless we need to start calculating with it)
so, it may be a dangerous patch. I'll adapt spec-mp to this new
constant but for the moment keep the 1 in my cont-loc file
Hans
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
--
===
Ing. Vít Zýka, Ph.D. TYPOkvítek
database publishing databazove publikovani
data maintaining and typesetting in typographic quality
priprava dat a jejich sazba v typograficke kvalite
tel.: (+420) 777 198 189 www: http://typokvitek.com
===
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] shading box many times
Hans Hagen wrote:
Vit Zyka wrote:
Hans Hagen wrote:
Taco Hoekwater wrote:
Hans Hagen wrote:
Vit Zyka wrote:
Dear Metafun Wizards,
I have noticed some strange behaviour with box shading. It works
OK until some number of shadings. Please see example:
http://typokvitek.com/tmp/shade-many.pdf
Any idea for solving? Next not-minimal but small and illustrative
example can help.
works ok here; since it concerns independent mp runs, i cannot
imagine what goes wrong; mayeb a bad random numer; does your log
say something?
My results are the same as Vit's example: The last 9 items are
not shaded but have 3 black sides and 1 white one
(with \write18 disabled, using a single \jobname-mpgraph.mp)
I don't know what is going, but at least I can reproduce the problem.
it's related to the fact that there can be 1000 specials only (this
/1000 in mp-spec)
if you add:
\def\MPrgbnumber#1{\expandafter\doMPrgbnumber#1.0\relax}
\def\doMPrgbnumber#1.#2#3#4#5#6\relax{#2#3#4#5}
\startMPinclusions
_special_div_ := 1 ;
\stopMPinclusions
to the file, and change all 1000's in mp-spec.tex into _special_div_
it works ok; so, the question (for taco is): does mp have the right
Really? Hmmm, not for me. I have got the graphics with flat color per
picture; every picture in the sequence has lighter and lighter color
(starting from black). (After performing your instructions in the
mp-spec.mp and refreshing metafun.mem.)
can you try the experimental zip i posted yesterday (.../temp/cont-tmf.zip)
forget about the definitions, just set \settrue \manyMPspecials in your
file
should work
>
> Hans
yes, it works!
Now it works even on my old distrib also. Seems the crutial line was
inside this vardef:
vardef add_special_signal = % write the version number
if (length _global_specials_ <> 0) or (length _local_specials_ <> 0) :
special ("%%MetaPostSpecials: 2.0 " & decimal _special_signal_ & "
" & decimal _special_div_) ;
fi ;
enddef ;
Again many thanks, Hans
Vit
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] Context 2005.11.30 Released (bis)
Taco Hoekwater wrote: New features since 2005.11.24: > * Extension for the use of marks in column sets using a new, three-argument, call to \getmarking : \getmarking[subsection][first][1] % column 1 \getmarking[subsection][first][3] % column 3 If Hans did not change a syntax after testing version for me, the correct syntax is \getmarking[subsection][1][first] % column 1 \getmarking[subsection][3][first] % column 3 Vit ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
[NTG-context] columnset & layers
Hello,
there is some collision between columnset and layer. See following example:
-
\newdimen\tgrX \newdimen\tgrY
\tgrX=3cm \tgrY=2cm
\starttext
\startcolumnset
\definelayer[tgr-cow][position=no,corner=top]
\setlayer[tgr-cow][x=.0\tgrX,y=.0\tgrY,location=middle]{O}%
\framed
[width=fit,height=fit,offset=none,
background={foreground,tgr-cow},frame=off]
{\externalfigure[cow][width=\tgrX,height=\tgrY]}%
\stopcolumnset
\stoptext
---
I got the error:
! Bad character code (361).
\@@layerboxtgr-cow
I am a bit puzzled by strange error message. If the columnset is
commented, the code is proceeded as expected.
Vit
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] columnset & layers
Hans Hagen wrote:
Vit Zyka wrote:
Hello,
there is some collision between columnset and layer. See following
example:
-
\newdimen\tgrX \newdimen\tgrY
\tgrX=3cm \tgrY=2cm
\starttext
\startcolumnset
\definelayer[tgr-cow][position=no,corner=top]
\setlayer[tgr-cow][x=.0\tgrX,y=.0\tgrY,location=middle]{O}%
\framed
[width=fit,height=fit,offset=none,
background={foreground,tgr-cow},frame=off]
{\externalfigure[cow][width=\tgrX,height=\tgrY]}%
\stopcolumnset
\stoptext
---
I got the error:
! Bad character code (361).
\@@layerboxtgr-cow
I am a bit puzzled by strange error message. If the columnset is
commented, the code is proceeded as expected.
define the layer outside the columnset; it's probably a grouping problem
Hans
OK, it works and is sufficient for me since I know a number of needed
layers.
But generally it is not a clean solution. Can be solved counting number
of layers in one pass and defining in the second, but... Hans, do you
think is the grouping problem doable? If yes I will put the note to the
collector.
Thanks
Vit
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
[NTG-context] float over both text and margin
Hi.
1) I am unsuccessfully solving the problem of making float spanning both
text and margin. More over, it is inside columnset... Example follows.
Is there some solution?
-
\showframe
\setupcolors[state=start]
\setuplayout[margin=0pt,rightmargin=1.5cm,width=middle]
\starttext
\startcolumnset
\dorecurse{2}{\input knuth \endgraf\blank}
\placefloat[page]{none}
{\framed
[width=\dimexpr\makeupwidth+\rightmarginwidth+
\rightmargindistance\relax,
height=\textheight]
{Here I would like to be a float over both text and margin. How?}
}
\dorecurse{10}{\input knuth \endgraf\blank}
\stopcolumnset
\stoptext
-
2) As a side effect I discover that in the following example the float
is over the text (so some text is disappeared).
-
\showframe
\setupcolors[state=start]
\setuplayout[margin=0pt,rightmargin=1.5cm,width=middle]
\starttext
\startcolumnset
\dorecurse{2}{\input knuth \endgraf}
\placefloat[page]{none}
{\framed
[width=\makeupwidth,height=\textheight,background=screen]
{Here I would like to be a float over both text and margin. How?}
}
\dorecurse{10}{\input knuth \endgraf}
\stopcolumnset
\stoptext
---
Vit
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] bold \tt and pdf-output
Taco Hoekwater wrote: Peter Münster wrote: And there are a lot more. If someone does not want bold tt in lm, then there could be a switch like "\nobftt". Nevertheless: thanks for your suggestions, they work very well! Cheers, Peter P.S.: Any comments about bold small caps? Latin Modern doesn't have a bold small caps (yet?), I think. If you really need it, generate pseudo small caps http://wiki.contextgarden.net/Pseudo_Small_Caps Vit ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] float over both text and margin
Hans Hagen wrote:
Vit Zyka wrote:
Hi.
1) I am unsuccessfully solving the problem of making float spanning
both text and margin. More over, it is inside columnset... Example
follows. Is there some solution?
2) As a side effect I discover that in the following example the float
is over the text (so some text is disappeared).
don't use \placefloat.
\definefloat
[pagefigure]
[figure]
\setupfloat
[pagefigure]
[default={page,none},
location=inner]
OK, I thought \placefloat[page] is defined like this, but now I see this
is more flexible.
Thank you for your patch it behaves better but still the float is over
the text, see page 2 in the example. I also do not see the influence of
location argument.
Vit
-
\showframe
\setupcolors[state=start]
\setuplayout[margin=0pt,rightmargin=1.5cm,width=13cm]
\setuppagenumbering[alternative=doublesided]
\definefloat
[pagefigure]
[figure]
\setupfloat
[pagefigure]
[default={page,none},
location=outer]
\unprotect
\def\dogetfloat{
\ifsomefloatwaiting
\global\setbox\floatlist\vbox{%
\unvbox\floatlist
\global\setbox\globalscratchbox\lastbox
}%
\ifcenterfloatbox
\ifdim\wd\globalscratchbox<\hsize
\setbox\floatbox\hbox to \hsize{\hss\box\globalscratchbox\hss}%
\else
\setbox\floatbox\box\globalscratchbox % local !
\wd\floatbox\makeupwidth
\fi
\else
\setbox\floatbox\box\globalscratchbox % local !
\fi
\global\advance\savednoffloats \minusone
\ifcase\savednoffloats
\global\somefloatwaitingfalse
\fi
\else
\global\savednoffloats\zerocount
[EMAIL PROTECTED]
\fi}
\protect
\starttext
\startcolumnset
\dorecurse{2}{\input knuth \endgraf\blank}
\placepagefigure{none}
{\framed
[width=\dimexpr\makeupwidth+\rightmarginwidth+\rightmargindistance\relax,height=\textheight]
{Here I would like to be a float over both text and margin. How?}
}
\dorecurse{10}{\input knuth \endgraf\blank}
\stopcolumnset
\stoptext
-
\dorecurse{3}{\input knuth \endgraf\blank}
\placepagefigure
{}
{...}
etc
maybe the next helps, but i hesitate to include this patch too fast
def\dogetfloat
{\ifsomefloatwaiting
\global\setbox\floatlist\vbox
{\unvbox\floatlist
\global\setbox\globalscratchbox\lastbox}%
\ifcenterfloatbox
\ifdim\wd\globalscratchbox<\hsize
\setbox\floatbox\hbox to \hsize{\hss\box\globalscratchbox\hss}%
\else
\setbox\floatbox\box\globalscratchbox % local !
\wd\floatbox\makeupwidth
\fi
\else
\setbox\floatbox\box\globalscratchbox % local !
\fi
\global\advance\savednoffloats \minusone
\ifcase\savednoffloats
\global\somefloatwaitingfalse
\fi
\else
\global\savednoffloats\zerocount
[EMAIL PROTECTED]
\fi}
Hans
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] problems with bold small caps
Hans Hagen wrote:
Taco Hoekwater wrote:
Peter M�nster wrote:
On Mon, 12 Dec 2005, Taco Hoekwater wrote:
\starttext
{\sc Normal and \bf bold Small-Caps. Accents: �}
\stoptext
Hi Peter,
And here are my problems:
1.) I get bold sc font, but the normal \sc is now the normal font.
\sc and \bf are defined at the same level in ConTeXt, so they (normally)
exclude each other. My guess is that it is very unlikely that this will
be fixed, but I assume it would be possible to do something using the
\variants mechanism (note: I am not sure and would not know how)
thi sis an option indeed;
This is implemented at http://wiki.contextgarden.net/Pseudo_Small_Caps
(links to files on typokvitek.com has to be retyped, sorry)
Vit
the other method is just to define an
additional typeface
\definetypeface[mainface].
\definetypeface[smallface].
\definetypeface[osface].
andthen do things like \smallface\bf
typeface switching is rather efficient
Hans
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
--
===
Ing. Vít Zýka, Ph.D. TYPOkvítek
database publishing databazove publikovani
data maintaining and typesetting in typographic quality
priprava dat a jejich sazba v typograficke kvalite
tel.: (+420) 777 198 189 www: http://typokvitek.com
===
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] Some localizations
Hans Hagen wrote: Richard Gabriel wrote: Hello Hans, quite incidentally I've found out that some of the localization files (lang-*.tex) are incomplete. I've filled in missing phrases in lang-ger.tex and lang-sla.tex for the languages I speak, i.e. English, German, Czech and Slovak. Hmmm. What about to suggest the changes first here in the list? I did not catch the original email. It is not in the archive too. So me and other users of these languages can not discuss the changes... Vit Please look at the attached files and if you consider them OK (they really should be! :-) ), please add them to the distribution. ok, patched (i made the section related labels comments since we default no nothing) btw, your lang-ger had no patch (apart from some AA change) Hans ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] Some localizations
Thank you both Gabriel and Hans, it was my double faut. First I did not find the original message and when I find it I sent my appology only to myself... Perhaps due to very late time. There is a minor typo in the file, please see following message. Sorry, Vit Vit Zyka wrote (2005-12-14 1:11 a.m.): > Hans Hagen wrote: > >> Richard Gabriel wrote: >> >>> Hello Hans, >>> >>> quite incidentally I've found out that some of the localization files (lang-*.tex) are incomplete. >>> I've filled in missing phrases in lang-ger.tex and lang-sla.tex for the languages I speak, i.e. English, German, Czech and Slovak. > > > > Hmmm. What about to suggest the changes first here in the list? I did not catch the original email. It is not in the archive too. So me and other users of these languages can not discuss the changes... > > Vit Sorry, original e-mail came to me much much later that the discussion... Changes seems to me OK at least of Czech with exception of one (old ?) typo: \setuplabeltext [\s!cz][\v!page=strana ] % not =strna Vit Hans Hagen wrote: Richard Gabriel wrote: Hi Vit, I've originally posted my updates here to the ntg-context list and asked Hans to review them and incorporate them into the distribution. Now it seems I've made something horribly bad... :-( I swear I won't be so active anymore! As one Czech proverb says: "For goodness to beggary." ;-) here are the diffs (old/proposed) ... the changes in lang-ger are only comments, but in lang-sla some (seldom used) labels are assigned: >diff t:\texmf\tex\context\base\lang-ger.tex t:\sources\lang-ger.tex 409c409,411 < \setuplabeltext [\s!en] [\v!chapter=] --- > %D We don't set these here. One can do that in a style. > > \setuplabeltext [\s!en] [\v!chapter=] % Chapter 411c413 < \setuplabeltext [\s!de] [\v!chapter=] --- > \setuplabeltext [\s!de] [\v!chapter=] % Kapitel 414c416 < \setuplabeltext [\s!af] [\v!chapter=] % [\v!chapter=hoofstuk] --- > \setuplabeltext [\s!af] [\v!chapter=] % Hoofstuk 422c424 < \setuplabeltext [\s!af] [\v!section=] % [\v!section=paragraaf] --- > \setuplabeltext [\s!af] [\v!section=] % Paragraaf 449c451 < \setuplabeltext [\s!en] [\v!appendix=] --- > \setuplabeltext [\s!en] [\v!appendix=] % Appendix 451,452c453,454 < \setuplabeltext [\s!de] [\v!appendix=] < \setuplabeltext [\s!da] [\v!appendix=] % [\v!appendix=bilag] --- > \setuplabeltext [\s!de] [\v!appendix=] % Anhang or Anschlu\ssharp > \setuplabeltext [\s!da] [\v!appendix=] % Bilag 454c456 < \setuplabeltext [\s!af] [\v!appendix=] % [\v!appendix=bylae] --- > \setuplabeltext [\s!af] [\v!appendix=] % Bylae and < \setupheadtext [\s!cz] [\v!graphics=Grafika] % new < \setupheadtext [\s!sk] [\v!graphics=...] --- > \setupheadtext [\s!cz] [\v!graphics=Graf] > \setupheadtext [\s!sk] [\v!graphics=Graf] 268c269 < \setupheadtext [\s!sk] [\v!intermezzi=...] --- > \setupheadtext [\s!sk] [\v!intermezzi=Intermezz\aacute] 279,280c280,281 < \setupheadtext [\s!cz] [\v!abbreviations=Zkratky] % new < \setupheadtext [\s!sk] [\v!abbreviations=...] --- > \setupheadtext [\s!cz] [\v!abbreviations=Zkratky] > \setupheadtext [\s!sk] [\v!abbreviations=Skratky] 285,286c286,287 < \setupheadtext [\s!cz] [\v!logos=Loga] % new < \setupheadtext [\s!sk] [\v!logos=...] --- > \setupheadtext [\s!cz] [\v!logos=Loga] > \setupheadtext [\s!sk] [\v!logos=Log\aacute] 291,292c292,293 < \setupheadtext [\s!cz] [\v!units=Jednotky] % new < \setupheadtext [\s!sk] [\v!units=...] --- > \setupheadtext [\s!cz] [\v!units=Jednotky] > \setupheadtext [\s!sk] [\v!units=Jednotky] 304c305 < \setuplabeltext [\s!sk] [\v!figure=... ] --- > \setuplabeltext [\s!sk] [\v!figure=Obr\aacute zok ] 310c311 < \setuplabeltext [\s!sk] [\v!intermezzo=... ] --- > \setuplabeltext [\s!sk] [\v!intermezzo=Intermezzo ] 315,316c316,317 < \setuplabeltext [\s!cz] [\v!graphic=... ] < \setuplabeltext [\s!sk] [\v!graphic=... ] --- > \setuplabeltext [\s!cz] [\v!graphic=Graf ] > \setuplabeltext [\s!sk] [\v!graphic=Graf ] 327,328c328,329 < \setuplabeltext [\s!cz] [\v!section=] % Sekce % new < \setuplabeltext [\s!sk] [\v!section=] --- > \setuplabeltext [\s!cz] [\v!section=] % Sekce > \setuplabeltext [\s!sk] [\v!section=] % Sekcia 333,334c334,335 < \setuplabeltext [\s!cz] [\v!subsection=] % Podsekce % new < \setuplabeltext [\s!sk] [\v!subsection=] --- > \setuplabeltext [\s!cz] [\v!subsection=] % Podsekce > \setuplabeltext [\s!sk] [\v!subsection=] % Podsekcia 339,340c340,341 < \setuplabeltext [\s!cz] [\v!subsubsection=] % Podpodsekce % new < \setuplabeltext [\s!sk] [\v!subsubsection=] --- > \setuplabeltext [\s!cz] [\v!subsubsection=] % Podpodsekce > \setuplabeltex
[NTG-context] extra nattab split in columns
Hi,
there occurs extra page break when natural tables is in the columns:
\showframe
\starttext
\startcolumns
Text.
\bTABLE[split=yes]
\dorecurse{100}{\bTR\bTD line\eTD\eTR}
\eTABLE
\stopcolumns
\stoptext
I do not know why there is extra \page
\bgroup\page\egroup
inside of \splittblboxa (core-ntb). Box breaking should be implicit here
(we are not inside a float here since \splittblbox forks this), should not?
Commenting mentioned line(s) solves this special problem.
Not understanding all background I do not know if it causes some
unwanted side-effect.
Vit
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] Legal Project Structure
David Arnold wrote:
All,
I have files:
~/IntermediateAlgebraText/book.tex
~/IntermediateAlgebraText/bookenv.tex
~/IntermediateAlgebraText/chapter1/chapter1.tex
...
~/IntermediateAlgebraText/chapter8/chapter8.tex
I also have:
~/IntermediateAlgebraText/chapter1/section1.tex
~/IntermediateAlgebraText/chapter1/section2.tex
~/IntermediateAlgebraText/chapter1/section3.tex
And similar files for each of the eight chapters. Here is my project
file: ~/IntermediateAlgebraText/book.tex
%output=pdftex
\startproject book
\environment bookenv
\product chapter1/chapter1
\product chapter2/chapter2
\product chapter3/chapter3
\product chapter4/chapter4
\product chapter5/chapter5
\product chapter6/chapter6
\product chapter7/chapter7
\product chapter8/chapter8
\stopproject
%%% Local Variables:
%%% mode: conTeXt-en
%%% End:
Here, for example, is my ~/IntermediateAlgebraText/chapter1/chapter1.tex
\startproduct chapter1
\project book
\startbodymatter
\chapter[chap:1]{Functions}
\input zapf
\component section1
\component section2
\component section3
\stopbodymatter
\stopproduct
%%% Local Variables:
%%% mode: conTeXt-en
%%% End:
As an example of a section, consider ~/IntermediateAlgebraText/
chapter1/section1.tex
%output=pdf
\startcomponent section1
\project book
\product chapter1
\section[sec:1]{The Function Concept}
\input knuth
\stopcomponent
%%% Local Variables:
%%% mode: conTeXt-en
%%% End:
This look OK to folks? Will I get in trouble with this plan?
Do not think so.
Project is not intended to translate as a whole. It is only some unique
environment, say for your textbooks. A single textbook (the
IntermediateAlgebraText) is a product. Each chapters are components.
So, move the structure down.
Vit
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] CSRoman again
Hans Hagen wrote: Hi I've spent some time experimenting with LatinModern font. After all I was able to use it, but I found I hate it. 1) The have accents positioned in a ugly way (or at least, in a way not common in the Czech typesetting) Do you have the current version - 0.99.3? 2) Some accents do no work, for instance \"o (at least this doesn't work: \loadmapfile[psclean.map] don't use that one, context will load map files for you (like il2-.) it looks like you load the wrong map file \enableregime[il2] ... B\"ohm-Bawerk Is there some way to get privately back to CS-Modern fonts? It seems these fonts are redefined to Latin Modern, so I can't use them. Please help. you can take a look at type-old.tex, and copy the relevant mapping (il2)to a local typeface file and load that one (as long as you make sure that the definitions are seen last) another option is to use a private map file (or a file with \pdfmaplines) that map the latin modern fonts to csr fonts (maybe a better options; the metrics that tex uses are the same anyway) anyhow, a few remarks: - at the last bachotek there was a talk about czech type design and one of the remarks was that fo rmany fonts this whole accent business was more a matter of taste than of quality (i will not quote the speaker on czech typesetting tradition here-) Probably Karel Horak. There was done big improvements since this time (spring 2005). So I have to support Hans's opinion. There was a HUGE discussion on the Czech TeX list before and during Boguslaw's lecture in Brno (nov 2005). The result was: - LM is suitable for Czech typesetting despite of some minor compromises followed from multinational typesetting. - Boguslaw admited some minor bugs in LM and promised to fix them. He also carried out many notes and proof sheets. - LM is much more consistent over the whole CM family. - CS Type1 has many bugs in accents (nearly in any non csr10 font). Vit - if one goes open type (some day soon for tex) one has to live with some general design (consistent positioning among a large range) - computer modern was never designed with all those accented characters in mind, and it will probably never look real great (plr, csr, vnr all look kin dof bad unless printed on high resolutions) - as far as i've heard, there will be some compromis cooked up for cs in the next release of lm, and afaik after that the majority of cstug will adopt the font, so in the end - csr is a rather limited font since it only implements a small subset of il2 (same for pl0 which also implements a subset; such subsets are a nightmare for tex developers and stand in the way for future tex's, this is why the lm project was started ... we need to survive) - just curious: do you always use cm fonts? there are other fonts with math nowadays Hans ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] ownnumber=yes
David Arnold wrote:
All,
This:
%output=pdf
\definehead[david][section]
If you set
\setuphead[david][ownnumber=yes]
>
\starttext
\chapter{One}
\input tufte
\section{Two}
\input tufte
then add a mandatory argument:
\david{10}{Three}
Vit
\david{Three}
\input tufte
\section{Four}
\input tufte
\stoptext
Causes this:
! TeX capacity exceeded, sorry [input stack size=5000].
\s!section
-3
\previoussection #1->\csname \??se #1
\c!before \endcsname
\countervalue #1->\csname #1
\endcsname
\@@longsectionnumber ...?se \previoussection {#1}}
>\zerocount \csname
\previ...
\finalsectionnumber ...alue {\@@sectie \c!number }
\fi \fi
\@@shortsectionnumber ...1\c!ownnumber \endcsname
\fi
...
l.14 \david{Three}
Any ideas?
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
--
===
Ing. Vít Zýka, Ph.D. TYPOkvítek
database publishing databazove publikovani
data maintaining and typesetting in typographic quality
priprava dat a jejich sazba v typograficke kvalite
tel.: (+420) 777 198 189 www: http://typokvitek.com
===
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
[NTG-context] last natural table column longer
Hello Wizards,
my multi page (and multicolumn) table exceeds the last page by 2 rows.
Is there a way to make last column a bit longer? Here is a minimal example:
--
\startbuffer[table]
\bTABLE[split=yes]
\dorecurse{138}{\bTR\bTD cell #1\eTD\eTR}
\eTABLE
\stopbuffer
\starttext
\startcolumns
\getbuffer[table]
\stopcolumns
\stoptext
--
Thanks
Vit
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] last natural table column longer
Taco Hoekwater wrote: Hi Vit, Vit Zyka wrote: Hello Wizards, my multi page (and multicolumn) table exceeds the last page by 2 rows. Is there a way to make last column a bit longer? Here is a minimal example: The underlying problem is that you have to enlarge the height of page 2. I don't know how that is 'normally' done, but perhaps it gives someone else a hint ? It may be done by \adaptlayout[2][height=+1cm] but it does not solve the problem. Natural tables (IFAIK) are splitted at one moment as a whole to one fix (page) height. If I enlarge the page (where \bTABLE) then every column will be longer. We need some option (or command inside table) that say: hey, naturaltable-split-mechanism, start to split to different value. There is some \extratblsplitheight in core-ntb, but I did not cook too deep to understand it. Vit Cheers, Taco ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
[NTG-context] typo in core-ntb.tex
Hi, there is typo in core-ntb.tex: \def\splittblboxb#1% \pagina -> \page Vit ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] typo in core-ntb.tex
Hans Hagen wrote: Vit Zyka wrote: Hi, there is typo in core-ntb.tex: \def\splittblboxb#1% \pagina -> \page you mean, in your ancient version? not here ... Hans Sorry, in this case. Yes, my version is pretty deluvial. Big project tends to be finnished, after that I upgrade and do some backlogs... vit ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
[NTG-context] [Fwd: after=\page in natural tables]
Hello,
this example from core-ntb.tex
\startbuffer[table3]
\bTABLE[split=yes]
\bTR \bTD left \eTD\bTD right \eTD\eTR
\bTR[after=\page] \bTD left \eTD\bTD right \eTD\eTR
\bTR \bTD left \eTD\bTD right \eTD\eTR
\eTABLE
\stopbuffer
\starttext
\getbuffer[table3]
\stoptext
---
does not work. Here is a log from live-wiki:
(./texweb-table3.tmp
! Use of \dododecrement doesn't match its definition.
\doifnextcharelse ...token =#1\def \!!stringa {#2}
\def \!!stringb
{#3}\futur...
\popTBL ...\intablefalse \fi \doglobal \decrement
\TBLlevel \relax
l.5 \eTABLE
?
! Emergency stop.
Vit
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] [Fwd: after=\page in natural tables]
Hans Hagen wrote:
Vit Zyka wrote:
Hello,
this example from core-ntb.tex
\startbuffer[table3]
\bTABLE[split=yes]
\bTR \bTD left \eTD\bTD right \eTD\eTR
\bTR[after=\page] \bTD left \eTD\bTD right \eTD\eTR
\bTR \bTD left \eTD\bTD right \eTD\eTR
\eTABLE
\stopbuffer
\starttext
\getbuffer[table3]
\stoptext
---
does not work. Here is a log from live-wiki:
(./texweb-table3.tmp
! Use of \dododecrement doesn't match its definition.
\doifnextcharelse ...token =#1\def \!!stringa {#2}
\def \!!stringb
{#3}\futur...
\popTBL ...\intablefalse \fi \doglobal \decrement
\TBLlevel \relax
l.5 \eTABLE
?
! Emergency stop.
nasty one: we need to make \page test-safe
\unexpanded\def\pagebreak
{\dosingleempty\dopagebreak}
I seee, OK thanks, it works. And I have to admit Taco was right with
actual page height influences column splitting. I was wrong with my
opinion. I was confused with
1) \adaptlayout[page][height=+3cm]
increases the height only by: min(3cm,footer-height)
(means UPTO footer-height)
2) there is some rounding error if setting height=(fit|middle), see
---
\showframe
\setuplayout[
height=fit, % or middle
]
\startbuffer[table]
\bTABLE[split=yes]
\dorecurse{200}{\bTR\bTD cell #1\eTD\eTR}
\eTABLE
\stopbuffer
\starttext
\startcolumns
\getbuffer[table]
\stopcolumns
\stoptext
Vit
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] last natural table column longer
Taco Hoekwater wrote:
Hi Vit,
Vit Zyka wrote:
Hello Wizards,
my multi page (and multicolumn) table exceeds the last page by 2 rows.
Is there a way to make last column a bit longer? Here is a minimal
example:
The underlying problem is that you have to enlarge the height of
page 2. I don't know how that is 'normally' done, but perhaps it
gives someone else a hint ?
Answer to my own question:
Question:
Imagine a table (\bTABLE) spanning several pages. Moreover the table
is inside multicolumn (\startcolumn). How to make some column longer
(having more rows in some column)? (Column height is given by page height.)
Solution:
1. Make page heigher (as high as the highest column) on every page where
the table is:
\setuplayout[lines=..]
2. Insert blank rows to appropriate table places to fill the columns:
\dorecurse{..}{\bTR\bTD\strut\eTD\eTR}
Remarks:
1. \adaptlayout{page}{height=+...} has limited capability of making page
heigher (not overcomes footer) so \setuplayout is more flexible.
2. Forsing column break by
\bTR[after=\column]\bTD...\eTD\eTR
works but add some spurious space on the top of next column. I was
not able to remove it even experimenting with my own
\installcolumnbreakhandler {MUL} {forse} {...}
and using
\bTR[after={\columnbreak[forse]}]\bTD...\eTD\eTR
Spurious space demonstration:
--
\startbuffer[table]
\bTABLE[split=yes]
\dorecurse{20}{\bTR\bTD cell #1\eTD\eTR}
\bTR[after={\columnbreak[yes]}]\bTD between \eTD\eTR
\dorecurse{100}{\bTR\bTD cell #1\eTD\eTR}
\eTABLE
\stopbuffer
\starttext
\startcolumns
\getbuffer[table]
\stopcolumns
\stoptext
--
Vit
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] Sorting question
Bernd Militzer wrote:
Hello,
is it possible to produce a sorted list without unsing the entry
\Ueberall in text?
%
\definesorting[person][personen]
\setupsorting[person][criterium = all]
%
\person{Unsinn, Klaus}
\person{Militzer, Bernd}
\person{Horten, Hans}
\person[Ueberall]{Überall, Heinrich}
%
\placelistofpersonen
>
> Any ideas?
We need to define (German?) sorting rules for newtexexec (newtexutil).
Tell me in between 'Ü' have to be sorted I will try to prepare a code
for this rule.
Vit
Thanks, Bernd
%#ConTeXt
%
% allgemeine Grundeinstellung
%
\enableregime[windows] % Eingabe-Codierung
\mainlanguage[de] % Sprachmodus
\usetypescript[modern][texnansi]
\setupbodyfont[12pt]
%
% Die besondere Seitenanpassung
%
\setuppapersize[a4][a4]
\setuplayout[location=singlesided]
\setuplayout[
backspace=2.46cm,topspace=1.2cm,
top=0cm,bottom=0cm,topdistance=0cm,bottomdistance=0cm,
header=1.5cm,footer=1.0cm,headerdistance=0cm,footerdistance=0cm,
leftedge=0cm,rightedge=0cm,leftedgedistance=0cm,rightedgedistance=0cm,
leftmargin=1.5cm,rightmargin=1.0cm,leftmargindistance=0.42cm,rightmargindistance=0.42cm,
width=16.5cm,height=27.4cm,
]
%
%
% Z�hler f�r die lfdNr.
%
\global\newcount\xlfd \xlfd=0
%
\def\LFD{\futurelet\testchar\MitOptArgLFD}
%
\def\MitOptArgLFD{\ifx[\testchar%
\let\next\OptArgLFD \else %
\let\next \NoOptArgLFD \fi \next}
%
% setzte den Z�hler auf bestimmten Wert
%
\def\OptArgLFD[#1]{%
{\global\xlfd=\number#1}
}
%
% erh�he den Wert um 1
% und gebe den Z�hler aus
% Besonderheit
% zweistellige Ausgabe der Zahl also 01., 02. ... 10. 11. ...
% und Punkt
%
\def\NoOptArgLFD{%
{\global\advance\xlfd by 1\relax}
\ifnum\xlfd<10
0\fi
\number\xlfd.
}
%
%Linie nach dem Namen
%
\def\myrule{ {\thinrules[n=1]\par}}
%
%
%
\starttext
%
%
% 1. ex no prob
%
\definesorting[personA][personenA]
\setupsorting[personA][criterium = all,before=\LFD,after=\myrule]
\personA{Unsinn, Klaus}
\personA{Militzer, Bernd}
\personA{Horten, Hans}
\placelistofpersonenA
\page
% 2. ex prob �berall on wrong position
%
\definesorting[personB][personenB]
\setupsorting[personB][criterium = all,before=\LFD,after=\myrule]
\personB{Unsinn, Klaus}
\personB{Militzer, Bernd}
\personB{Horten, Hans}
\personB{�berall, Heinrich}
\placelistofpersonenB
\page
% 3. ex prob �berall is missing
%
\definesorting[personC][personenC]
\setupsorting[personC][criterium = all,before=\LFD,after=\myrule]
\personC{Unsinn, Klaus}
\personC{Militzer, Bernd}
\personC{Horten, Hans}
\personC[Ueberall]{�berall, Heinrich}
\placelistofpersonenC
\page
% 4. ex prob �berall is missing
%
\definesorting[personD][personenD]
\setupsorting[personD][criterium = all,before=\LFD,after=\myrule]
\personD{Unsinn, Klaus}
\personD{Militzer, Bernd}
\personD{Horten, Hans}
\personD[Ueberall]{�berall, Heinrich}
First I use \Ueberall\ in text
\placelistofpersonenD
\page
\stoptext
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
--
===
Ing. Vít Zýka, Ph.D. TYPOkvítek
database publishing databazove publikovani
data maintaining and typesetting in typographic quality
priprava dat a jejich sazba v typograficke kvalite
tel.: (+420) 777 198 189 www: http://typokvitek.com
===
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] Sorting question
Mojca Miklavec wrote:
On 1/22/06, Vit Zyka wrote:
We need to define (German?) sorting rules for newtexexec (newtexutil).
Tell me in between 'Ü' have to be sorted I will try to prepare a code
for this rule.
ä (adiaeresis) is identical to a, ö (odiaeresis) identical to o, ü
(udiaeresis) identical to u, the same for uppercase. ß (ssharp) is
edentical to "ss" (same for uppercase, but in uppercase it's written
as SS anyway).
Hmmm, that is not complete: I understand that every ü, Ü, u, U comes to
single group, but is u<ü
--
\input sort-ini.tex
\useregime[win]
\enableregime[windows] % Eingabe-Codierung
\mainlanguage[de] % Sprachmodus
\usetypescript[modern][texnansi]
\startmode[sortorder-de]
\exportsortexpansion{u}{u+1}
\exportsortexpansion{udiaeresis}{u+2}
\exportsortexpansion{U}{u+3}
\exportsortexpansion{Udiaeresis}{u+4}
\exportsortdivision{u+1}{u}
\exportsortdivision{u+2}{u}
\exportsortdivision{u+3}{u}
\exportsortdivision{u+4}{u}
\stopmode
\setmode{sortorder-de}
\starttext
\definesorting[person][personen]
\setupsorting[person][criterium = all]
%\def\person#1{#1\expanded{\index{#1}}, }
%\def\person#1{#1\index{#1}, }
\person{Unsinn, Klaus}
\person{Militzer, Bernd}
\person{Horten, Hans}
%\person{Überall, Heinrich}
\person{\Udiaeresis berall, Heinrich}
Index:
\placelistofpersonen
%\placeindex[alternative=A]
\stoptext
--
Comments:
- newtexexec is needed!
- works for both index/sorting
- works only for \Udiaeresis not for direct Ü! Strange! Why?
Vit
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] Sorting question
Henning Hraban Ramm wrote: > Am 2006-01-23 um 01:08 schrieb Vit Zyka: > >>> ä (adiaeresis) is identical to a, ö (odiaeresis) identical to o, ü >>> (udiaeresis) identical to u, the same for uppercase. ß (ssharp) is >>> edentical to "ss" (same for uppercase, but in uppercase it's written >>> as SS anyway). >> >> >> Hmmm, that is not complete: I understand that every ü, Ü, u, U comes >> to single group, but is u<ü > > I didn't test your code, but u, ü, U and Ü should be handled as same > (in "normal German order") > and u=U, ü=ue=Ü=Ue=UE in "German phone book order". Hmmm, I feel that the situation is more complicated (same as in Czech). Proper sorting needs several (3 or 4, perhaps some languages more?) passes: 1. pass: division - define which letters comes to the same group (it can be also group of letters) - defined for newtexutil.rb 2. pass: sorting with the simplified rules e.g. ü=ue=Ü=Ue=UE 3. pass: if all letter are the same according the 2. pass, then apply e.g. ü Greetlings from Lake Constance! Enjoy it. Vit ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
[NTG-context] page float in columnset
Hi wizards,
let me go back to columnsets. I try to place a float spanning the whole
page area. When doing that the running text placing exactly one page is
completely and forever lost! Please see example:
-
\setuplayout[grid=yes]
\showgrid
\starttext
\startcolumnset
\dorecurse{4}{#1 --- \input knuth \blank\endgraf}
\placefigure[here]{none}{%
\framed
[width=\makeupwidth,height=\textheight,offset=overlay]
{Page float.}}
\dorecurse{10}{#1 --- \input knuth \blank\endgraf}
\stopcolumnset
\stoptext
---
Switching here -> page, tops, ... does not solve the problem.
The similar behaviour is observed when a float has one column width and
fit the whole column height.
Is there some solution or another way how to do that and preserve the text?
Thanks
Vit
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] Substack in Context
Taco Hoekwater wrote:
> Aditya Mahajan wrote:
>
>>>The definition from m-newmat is at least partly superceded by the
>>>new core math definitions Hans added last week, so a new implementation
>>>would be better.
>>
>>Can you suggest something?
>
>
> Like this maybe?
>
> \def\substack#1%
>{\begingroup
> \let\\\cr
> \startmathmatrix #1\stopmathmatrix
> \endgroup}
>
> Probably needs a bit of tweaking to make it look better
> (perhaps a [strut=no] parameter?).
What about use math primitive \atop:
\def\substack#1%
{\begingroup
\let\\\atop
#1
\endgroup}
Vit
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] page float in columnset
Hans Hagen wrote:
> Vit Zyka wrote:
>
>
>>Hi wizards,
>>
>>let me go back to columnsets. I try to place a float spanning the whole
>>page area. When doing that the running text placing exactly one page is
>>completely and forever lost! Please see example:
>>
>>-
>>\setuplayout[grid=yes]
>>\showgrid
>>
>>\starttext
>>\startcolumnset
>> \dorecurse{4}{#1 --- \input knuth \blank\endgraf}
>> \placefigure[here]{none}{%
>>\framed
>> [width=\makeupwidth,height=\textheight,offset=overlay]
>> {Page float.}}
>> \dorecurse{10}{#1 --- \input knuth \blank\endgraf}
>>\stopcolumnset
>>\stoptext
>>---
>>
>>Switching here -> page, tops, ... does not solve the problem.
>>The similar behaviour is observed when a float has one column width and
>>fit the whole column height.
>>
>>Is there some solution or another way how to do that and preserve the text?
>>
>>
>
> you were the guy running an ancient context, wasn;t it?
Yes on my machine, not so ancient on an notebook; but your context is
old too since you sent me off-list the same wrong result ;-)
Please, closely look on the paragraph numbering. In the second paragraph
sequence the number 2, 3, and 4 are missing, number 1 and 5 are partialy
missing -> total one page is lost.
> works ok here (although i admit that this mechanism is a bit tricky;
i believe; it is one context's advantage over plain or latex, so it can
be a new challenge to decrease the number of bugs...
> a solution is to make the graphic .99 textheight
even .98 not ;-) No, it does not solve. Text stops to disappear when
there is enough space for at least one line. But I would like only
figure on the page. Not with one or more line text. Yes one can add some
imaginary empty line, but it is agly (and difficult if some \vadjust
inside a paragraph is needed).
> (in columnset sone runs into rounding error problems
Perhaps but loosing text it the worst variant - no error, no warning, no
graphical mark. You can easily overlook such disaster.
Vit
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] page float in columnset
Hans Hagen wrote:
> Vit Zyka wrote:
>
>>Hans Hagen wrote:
>>
>>
>>>Vit Zyka wrote:
>>>
>
> ah ... your persistent ...
yes, slow but persistent (hopefully not annoying...)
> you can try this:
>
> \OTRSEToutput
> {\dontcomplain % new, get rid of overfull message (to be sorted out)
>\doloop
> {\OTRSETnaturalflush
> %\OTRSETstartnextpage % no
> \OTRSETdoflushfloats % actually belongs in \flushsavedfloats (but goes
> wrong)
> \OTRSETcheckfreelines
> \ifsomefreecolumncells \exitloop \fi}%
>\OTRSETchecksidefloat}
Hura!!! Great. It works! It works! It works! It works at least for:
- full page float: [page|here](\textheight,\makeupwidth) in simple example
- full column float: [here](\textheight,\OneColWidth) in simple example
- does not change page break and/or float positions in 160 pages 2 or 3
columnsets document with about 330 floats!
- and more over: preserves any text in this doc!
It does not work for \startcolumns (not columnsets) but
- seems to me it is another problem (break one more line in each column
that is appropriate to \textheight)
- the behaviour is exactly the same with or without the new patch
Thank you, Hans, very much! I do not know how to reciprocate with...
(you sometimes suggest to buy a beer but I am afraid of your being
drunken if everybody who is helped by you buys to you a beer :)
Vit
> tricky patch so please test extensively! (for the moment put this in your
> local copy of cont-loc.tex or maybe in your doc)
>
> Hans
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] page float in columnset
Hans Hagen wrote: > Vit Zyka wrote: > >>- does not change page break and/or float positions in 160 pages 2 or 3 >>columnsets document with about 330 floats! ...I can add fluent marginal column where the main text spans 2 columnsets... > so you have the world record now of the most complex doc made with column > sets; makes me confident that this (tricky) mechanism is becoming workable > > Hans :-) That is a good news. Bad news is that I am working on this since March; on September it was to be done, but was not. Even worst, it has not been finnished yet - currently in the proofreading stage. Fortunately it is not a commercial job. But my friends are wondering what I can so long to do at it and they consider me to be crazy. Vit ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] line with height=0 in TABLE
Peter Münster wrote: > Hello, > > I would like to have a line with zero height in a TABLE, but it seems to be > more difficult, than I thought: > > \starttext > \setupTABLE[r][2][height=0pt,offset=0pt] ^^ offset=overlay Cheers Vit > \bTABLE > \bTR \bTD bla \eTD \eTR > \bTR \bTD \eTD \eTR > \bTR \bTD bla \eTD \eTR > \eTABLE > \stoptext > > There is still some height in line 2... > How could I get rid of this please? > > Greetings, Peter ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] Fonts problems
Michal Kvasnička wrote:
> Good afternoon.
>
> I apologize that I bother you once more, but I'm getting desperate. :-(
> I have still problem with fonts in ConTeXt---perhaps I'm not able to
> install it well. I use ConTeXt ver: 2006.02.03 21:00, pdfeTeX, Version
> 3.141592-1.21a-2.2 (Web2C 7.5.4), tetex-3.0-13 under SuSE Linux 9.2 (the
> tetex is grabbed from Suse 9.3). I tried to copy all files where I
> thought they should have been, texhashed, and build formats. Now, some
> things work, but not all of them, and not in an expected way.
>
> Problem 1: I expect that a following file should typeset "tufte" in
> Latin Modern font.
> \setupoutput[pdf]
> \starttext
> \input tufte
> \stoptext
> ConTeXt loads some map files (/usr/share/texmf/fonts/map
> /dvips/context/original-empty.map}{/usr/share/texmf/fonts/map/dvips/context/ori
> ginal-base.map}{/usr/share/texmf/fonts/map/dvips/context/ec-public-lm.map}{/usr
> /share/texmf/fonts/map/dvips/context/ec-base.map}{/usr/share/texmf/fonts/map/dv
> ips/context/8r-base.map}{/usr/share/texmf/fonts/map/dvips/context/t5-base.map}{
> /usr/share/texmf/fonts/map/pdftex/context/original-ams-base.map}{/usr/share/tex
> mf/fonts/map/dvips/context/original-ams-euler.map}{/usr/share/texmf/fonts/map/d
> vips/context/original-public-lm.map}), but it clearly isn't able to find
> the right one, since it writes this error message:
> kpathsea: Running mktexpk --mfmode / --bdpi 72 --mag 1+0/72 --dpi 72
> ec-lmr12
> mktexpk: don't know how to create bitmap font for ec-lmr12.
Hello,
it seems like old lm package (wrong map files). Try to update from
http://www.tug.org/cgi-bin/dirarchive/tex-archive/fonts/lm/fonts.zip
Vit Zyka
> kpathsea: Appending font creation commands to missfont.log.
> )
> Warning: pdfetex (file ec-lmr12): Font ec-lmr12 at 72 not found
> I can correct it when I add one more file:
> \loadmapfile[psclean.map]
> But I was told that I should omit this line. What's the problem? How can
> I correct it?
>
>
> Problem 2: Let's suppose I add into the previous file this
> B\"oh-Bawerk
> then the letter \"o is missing (a white space is on its place). Isn't
> there a bug in the Latin modern fonts/virtual fonts/metrics, or
> whatever? Moreover, gv views the hyphen over the "h" and "B" letters.
> (Acrobat Reader 7 view it all right.) How is that possible.
>
>
> Problem 3: Some fonts are not used properly. The following file
> \setupoutput[pdf]
> \loadmapfile[psclean.map]
> \usetypescript[ppl] % working pos
> \switchtobodyfont[ppl,10pt]
> \starttext
> \input tufte\par
> \stoptext
> works well. It works even if I change "pos" to "ppl", "ptm", "phv", or
> "tim". It works even when changed to "pcr", but the text is ragged. When
> changed to "con", "bookman", or "iwona", it does nothing---the text is
> typeset in Latin Modern. When changed to "ant", I get this error message:
> kpathsea: Running mktextfm sy-anttrz
> /usr/share/texmf/web2c/mktexnam: Could not map typeface abbreviation
> y- for sy-anttrz.
> /usr/share/texmf/web2c/mktexnam: Need to update
> /usr/share/texmf/fonts/map/fontname/special.map?
> mktextfm: Running mf-nowin -progname=mf \mode:=ljfour; mag:=1;
> nonstopmode; input sy-anttrz
> This is METAFONT, Version 2.71828 (Web2C 7.5.4)
> kpathsea: Running mktexmf sy-anttrz
> ! I can't find file `sy-anttrz'.
> I think I have installed all these fonts (instead of Adobe fonts I have
> URW ones). What's wrong.
>
>
>
> Problem 4: From what afm files were the tfm metrics for Times,
> Helvetica, and Palatino generated? Accents are positioned in a strange
> way and after a tquoteright is a strange hole (bad kerning). A long
> time ago I've generated myself tfm metrics from afm files of URW fonts,
> and they look much better. Were these afm files used, or were used some
> afm metrics of fonts that do not include accented letter, i.e. are those
> letters just TeX-based composites?
>
>
>
> Problem 5: How can I switch back to CS fonts? (Well, I know I bother you
> all, but I still do not like Latin Modern fonts.) :-( I thought that
> something like this could work, but it doesn't:
> \setupoutput[pdf]
> \loadmapfile[psclean.map]
> \loadmapfile[/usr/share/texmf/dvips/context/original-public-csr.map]
> \starttypescript [serif] [computer-modern] [il2]
> \definefontsynonym [cmb10][csb10][encoding=il2]
> \definefontsynonym [cmbsy10]
[NTG-context] wrong order of content-list items if using balanced columnsets
Hello Wizards,
the next example illustrates the problem with wrong order of
content-list items if using balanced columnsets:
-
\setuplayout[grid=yes,topspace=1cm,bottomspace=1cm,height=middle]
\showgrid
\definecolumnset[A][n=2,balance=yes]
\setupcolumnsetlines[A][1][1][21]
\setupcolumnsetlines[A][1][2][21]
\definecolumnset[B][n=2,balance=yes]
\starttext
\startcolumnset[A]
\section{Knuth}
\dorecurse{2}{\input knuth \endgraf}
\stopcolumnset
\placeongrid{\hairline}
\startcolumnset[B]
\section{Zapf}
\dorecurse{1}{\input zapf \endgraf}
\blank
Content:
\placecontent[criterium=all]
\stopcolumnset
\stoptext
Problem is that the second section (Zapf) is inserted to .tui before the
first one (Knuth). My observation: on the page where one columnset (A)
is closed by \setupcolumnsetlines and the second (B) continues, .tuo
contains marks from B firstly. This makes book content unsable in this
configuration.
Any solutions? I am thinking about: Proper order writting to .tuo or to
sort items according to mark number - it is correct (not sure if it is
implemented?).
Thanks
Vit
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] wrong order of content-list items if using balanced columnsets
Hans Hagen wrote:
> Vit Zyka wrote:
>
>>Hello Wizards,
>>
>>the next example illustrates the problem with wrong order of
>>content-list items if using balanced columnsets:
>>
>>-
>>\setuplayout[grid=yes,topspace=1cm,bottomspace=1cm,height=middle]
>>\showgrid
>>
>>\definecolumnset[A][n=2,balance=yes]
>>\setupcolumnsetlines[A][1][1][21]
>>\setupcolumnsetlines[A][1][2][21]
>>\definecolumnset[B][n=2,balance=yes]
>>
>>\starttext
>>\startcolumnset[A]
>> \section{Knuth}
>> \dorecurse{2}{\input knuth \endgraf}
>>\stopcolumnset
>>\placeongrid{\hairline}
>>\startcolumnset[B]
>> \section{Zapf}
>> \dorecurse{1}{\input zapf \endgraf}
>> \blank
>> Content:
>> \placecontent[criterium=all]
>>\stopcolumnset
>>
>>\stoptext
>>
>>
>>Problem is that the second section (Zapf) is inserted to .tui before the
>>first one (Knuth). My observation: on the page where one columnset (A)
>>is closed by \setupcolumnsetlines and the second (B) continues, .tuo
>>contains marks from B firstly. This makes book content unsable in this
>>configuration.
>>
>>Any solutions? I am thinking about: Proper order writting to .tuo or to
>>sort items according to mark number - it is correct (not sure if it is
>>implemented?).
>>
>
> it's a kind of bug; how about swapping the order: (page-lyr.tex)
>
> \def\settextpagecontent#1#2#3% #2 and #3 will disappear
> {\doifelselayerdata{OTRTEXT}
> {\setbox#1\hbox to \makeupwidth
> {\startoverlay
>{\tightlayer[OTRTEXT]} % first, otherwise problems with toc
>{\normalsettextpagecontent{#1}{#2}{#3}\box#1}
> \stopoverlay}%
> \dp#1\zeropoint}%
> {\normalsettextpagecontent{#1}{#2}{#3}}}
>
Slaaav!
> (you really don't want to know what happens there -)
World record document with 40 balanced columnsets says it is OK.
Thanks you Hans
Vit
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] sources of the manaul
[EMAIL PROTECTED] wrote: > On Thu, Mar 16, 2006 at 05:17:46PM -0500, Aditya Mahajan wrote: > >>On Thu, 16 Mar 2006, frantisek holop wrote: >> >>>i think i have read something about this issue, but i don't remember >>>where or when :) >> >>You can check out the manual sources from the svn respository >>svn://ctx.pragma-ade.nl/manuals > > > Is there a "read-only account" available? > When doing a check out, how much data will be transferred? > (So I can estimate the download time (or reconsider doing it ;- )) > > > > >>If you prefer to browse them online they are available at >>http://context.aanhet.net/svn/ > > > > Or is that the "read-only account"? > (Is `svn checkout http://context.aanhet.net/svn/ context-manual` > the way to go ? ) That is also my question. I would like to make a copy on my comp for making current version. My goal is to start to translate the beginners manual to Czech. Can somebody suggest me the better way to do that? - Will we store all language translations in one source files (and one repository)? (in blocks ... ... ... ...) - Or each language mutation will be done in a unique file set? I can imagine advantages and disadvantages of both ways. But my very little knowledge of SVN can not deside better solution. What is prefereble? Vit ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] sources of the manaul
Vit Zyka wrote:
>>>You can check out the manual sources from the svn respository
>>>svn://ctx.pragma-ade.nl/manuals
>
> That is also my question. I would like to make a copy on my comp for
> making current version.
>
> My goal is to start to translate the beginners manual to Czech. Can
> somebody suggest me the better way to do that?
>
> - Will we store all language translations in one source files (and one
> repository)? (in blocks ...
> ... ... ...)
>
> - Or each language mutation will be done in a unique file set?
I have managed to make a local copy of SVN yesterday (strange I was not
successfull some week ago) and the answers are obvious now from both the
en and nl files.
* Manual ma-cb-en:
- print version is OK.
- screen version errors:
ma-cb-screen.tex, l.18: midle -> middle
ma-cb-style.tex, l.59,60: raster -> screen;
backroundraster -> backgroundscreen
There was some discussion about beginners manual (hopefully ConTeXt at
Excursion) translation into another languages in autumn. Does somebody
make some steps towards this goal?
How stable do you (Hans, ...) think is the English version of ConTeXt in
Excursion (ma-cb-en) now?
* Manual context error:
This is pdfeTeXk, Version 3.141592-1.30.3-2.2 (Web2c 7.5.5)
(format=cont-en 2006.3.18) 20 MAR 2006 15:40
entering extended mode
%&-line parsing enabled.
(c:/TeXLive/texmf-experim/web2c/natural.tcx)
**&cont-en cont-en.tex
(./cont-en.tex
ConTeXt ver: 2006.02.15 17:41 fmt: 2006.3.18 int: english mes: english
.
(./co-en-01.tex [7.1.7]
layout : subpage set 1 processed (size 7)
[8.2.1] [MP cont-en-mpgraph.2] [9.3.2] [10.3.3]
chapter : - Preface
! Use of \@@opitemize1placestopper doesn't match its definition.
\doifelse #1#2->\edef \!!stringa {#1}
\edef \!!stringb {#2}\ifx
\!!stringa \!...
\setitemlevel ...temlevel \c!placestopper }\v!yes
{\def \tempsymbol
{\getite...
\redostartitemgroup ...ommando }\setitemlevel {#1}
\ifx \listitem \empty
\set...
\dostartitemgroup ... {\dodostartitemgroup [#2][]}
\fi
\par
l.26
---
Vit
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] sources of the manaul
John R. Culleton wrote: > On Friday 17 March 2006 08:47, Hans Hagen wrote: > >>Geert Stappers wrote: >> >>>On Thu, Mar 16, 2006 at 05:17:46PM -0500, Aditya Mahajan wrote: >>> On Thu, 16 Mar 2006, frantisek holop wrote: >i think i have read something about this issue, but i don't remember >where or when :) You can check out the manual sources from the svn respository svn://ctx.pragma-ade.nl/manuals >>> >>>Is there a "read-only account" available? >>>When doing a check out, how much data will be transferred? >>>(So I can estimate the download time (or reconsider doing it ;- )) >>> >>> If you prefer to browse them online they are available at http://context.aanhet.net/svn/ > > I downloaded a bunch of files from that location. Just a quick > question: Have they been updated since the 2001 edition? Seems to me, context manual, mathml, and fonts have been updated. Vit ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] \setupmarginrules
frantisek holop wrote: > hmm, on Fri, Mar 17, 2006 at 07:49:57PM +0100, Willi Egger said that > >>Hi Frantisek >> >>The correct command is \setupmarginrules[rulethickness=2pt]. The option >>is rulethickness and it takes a dimension. > > > i have tried this and it doesn't seem to work. > > \defineparagraphs [poem][n=2] > \setupparagraphs[poem][1][width=.25\textwidth] > \setupparagraphs[poem][2][rule=on] > > \setupmarginrules [rulethickness=5pt] Hi, this sets rules for margins. I guess the solution \setupparagraphs[poem][2][rule=on,rulethickness=5pt] Vit > the rule in front of the 2nd column (poem[2]) still > has the default thickness. > > -f ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] \setupmarginrules
frantisek holop wrote:
> hmm, on Sun, Mar 26, 2006 at 10:12:01PM +0200, Vit Zyka said that
>
>>>\defineparagraphs [poem][n=2]
>>>\setupparagraphs[poem][1][width=.25\textwidth]
>>>\setupparagraphs[poem][2][rule=on]
>>>
>>>\setupmarginrules [rulethickness=5pt]
>>
>>this sets rules for margins. I guess the solution
>>
>>\setupparagraphs[poem][2][rule=on,rulethickness=5pt]
>
>
> sorry, i forgot to add, that i tried this one also :)
> seemed logical, but the result is the same.
>
> -f
OK, there is a patch (with minor correction):
---
\defineparagraphs [poem][n=2,distance=20pt]
\setupparagraphs[poem][1][width=.25\textwidth]
\setupparagraphs[poem][2][rule=on,rulethickness=10pt]
\unprotected
\def\doalinealijn#1#2%
{\doifelsevalue{\??al#2\the\alteller\c!rule}\v!on
{\dimen2=#1\relax
\hskip.5\dimen2
% \hskip-\linewidth
\hskip-.5\getvalue{\??al#2\the\alteller\c!rulethickness}% VZ
% \vrule\!!width\linewidth
\vrule\!!width\getvalue{\??al#2\the\alteller\c!rulethickness}% VZ
\hskip-.5\getvalue{\??al#2\the\alteller\c!rulethickness}% VZ
\hskip.5\dimen2}
{\hskip#1}}
\starttext
\startpoem
\input knuth
\nextpoem
\input knuth
\stoppoem
\stoptext
-
for distro it also should be accompanied by
\c!rulethickness=\linewidth,
in \def\dodefineparagraphs[#1][#2]%
Vit
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] \setupmarginrules
Willi Egger wrote:
> Hi Vit!
>
> Thanks for this patch. Do you know why the rulethickness must be given
> in integer dimension. e.g. 2.5pt will cause an error, telling that a
> wrong dimension is used.
>
> Willi
Due to my fault. Sorry. This is a little bit better solution:
---
\defineparagraphs [poem][n=2,distance=20pt]
\setupparagraphs[poem][1][width=.25\textwidth]
\setupparagraphs[poem][2][rule=on,rulethickness=5.5pt]
\unprotected
\def\doalinealijn#1#2%
{\doifelsevalue{\??al#2\the\alteller\c!rule}\v!on
{\dimen2=#1\relax
\dimen3=\getvalue{\??al#2\the\alteller\c!rulethickness}% VZ
\hskip.5\dimen2
% \hskip-\linewidth
\hskip-.5\dimen3 % VZ
% \vrule\!!width\linewidth
\vrule\!!width\dimen3 % VZ
\hskip-.5\dimen3 % VZ
\hskip.5\dimen2}
{\hskip#1}}
\starttext
\startpoem
\input knuth
\nextpoem
\input knuth
\stoppoem
\stoptext
----
Vit
> Vit Zyka wrote:
>
>
>>frantisek holop wrote:
>>
>>
>>
>>>hmm, on Sun, Mar 26, 2006 at 10:12:01PM +0200, Vit Zyka said that
>>>
>>>
>>>
>>>
>>>>>\defineparagraphs [poem][n=2]
>>>>>\setupparagraphs[poem][1][width=.25\textwidth]
>>>>>\setupparagraphs[poem][2][rule=on]
>>>>>
>>>>>\setupmarginrules [rulethickness=5pt]
>>>>>
>>>>>
>>>>
>>>>this sets rules for margins. I guess the solution
>>>>
>>>>\setupparagraphs[poem][2][rule=on,rulethickness=5pt]
>>>>
>>>>
>>>
>>>sorry, i forgot to add, that i tried this one also :)
>>>seemed logical, but the result is the same.
>>>
>>>-f
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] \setupmarginrules
Taco Hoekwater wrote:
>
> Vit Zyka wrote:
>
>> \dimen3=\getvalue{\??al#2\the\alteller\c!rulethickness}% VZ
>
>
> Taco Hoekwater wrote:
>
>> \dimen4=\getvalue{\??al#2\the\alteller\c!rulethickness}% VZ
>
>
> That's funny ;)
>
> Cheers, Taco
Yes funny. Even line position is the same. But why 4? I know: why not.
Will be move to distro? (Indifferent which version.) Old code contained
buggy space calculation and the rule position, I think.
Vit
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] Problem with encoding, XML and writetolist...
Hans Hagen wrote: > Martin Kolařík wrote: > >>Aha, here maybe will be the solution :-) >> >>I'am using standalone Win32 distribution from Pragma and I'm running texexec >>with --translate=cp1252cs. Typescripts use il2, which corresponds to fonts, >>of course. If I run the code without XML (if I transcribe XML to \chapter >>etc.) I get toc entry correctly too. >> >>Where should I look for more? What is natural.ctx? >> > > this is a one-to-one translation vector, and the one standard used by > context; forget about all those other mappings, they can be done using > regimes; you can use an il2 input regime, and any (resonable) font encoding, > > Hans specifically for you: \mainlanguage[cz] \enableregime[windows] % or \enableregime[latin2] for il2 is enough for Latin Modern and Czech. Vit ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] Absolute positioning of grafics in ConTeXt
Johannes Fichtinger wrote:
> Hi all,
>
> I'm quite new to ConTeXt, but I've been working with LaTeX for several years
> now. Now I faced a problem which I'm not able to solve in LaTeX which
> probably can be solved in ConTeXt:
>
> I need a possibility to set grafics in a book on exact, absolute positions.
> Now I found the way for background images, like in the attached example.
> But obviously, normal text is written above the background image. I need
> now a possibility like this but for foreground grafics.
>
> So, how can I set the position of grafics absolutely in ConTeXt?
>
> Thanks,
> Johannes.
>
> My example:
>
> --
> \enableregime [il1]
> \mainlanguage [de]
> \setuplayout[grid=yes,marking=on,horoffset=2cm,veroffset=2cm]
> \definepapersize[jo][width=14cm,height=18cm]
> \setuppapersize [jo][a4]
>
> \useexternalfigure[wr][dpm][type=png, width=5cm, height=4cm]
> \definelayer[wr-layer]
> \defineoverlay[wr-overlay][\composedlayer{wr-layer}]
> \setupbackgrounds[page][background={wr-overlay}]
\setupbackgrounds[page][background={foreground,wr-overlay}]
Cheers, Vit
> \starttext
>
> \setlayer[wr-layer][x=-0.1cm,y=-0.1cm]{\externalfigure[wr]}
> Blablabla
>
> \stoptext
> --
> ___
> ntg-context mailing list
> ntg-context@ntg.nl
> http://www.ntg.nl/mailman/listinfo/ntg-context
>
--
===
Ing. Vít Zýka, Ph.D. TYPOkvítek
database publishing databazove publikovani
data maintaining and typesetting in typographic quality
priprava dat a jejich sazba v typograficke kvalite
tel.: (+420) 777 198 189 www: http://typokvitek.com
===
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] Problem with encoding, XML and writetolist...
Martin Kolařík wrote:
> Hi Hans,
>
> I've analyzed the situation using different combinations of regimes and
> encodings, including switching off handling (\donothandleactivecharacter) and
> it seems to me, that every text with chars > 127, which is fully expanded (as
> in 8bit.tex), must cause difficulties, because TOC entry read back from TUO
> is scanned independently and thus spaces are gobbled.
Hi Martin,
we have discussed this problem a year ago. In that time I solve it just
writing '{}' in each title where was needed, like
\chapter{Dobré{} ráno}
Now I have cooked an automatic solution. It is not optimal (effective)
but working. The only needs is to redefine
\def\numcharacter#1{\char#1{}}
\let\dochar\numcharacter
and to load appropriate encoding file once more. Since it is banned a
new macro \reuseencoding was introduce:
For Hans:
It would be nice if this feature was enabled in a standard distro.
Perhaps you will find some more optimal solution...
---
\unprotected
\def\doreuseencoding#1%
{\letvalue{\c!file\f!encodingprefix#1}\empty
\makeshortfilename[\f!encodingprefix#1]%
\startreadingfile
\readsysfile\shortfilename
{\showmessage\m!encodings2{#1}}
{\showmessage\m!encodings3{#1}}%
\stopreadingfile}
\def\reuseencoding[#1]%
{\processcommalist[#1]\doreuseencoding}
\def\numcharacter#1{\char#1{}}
\let\dochar\numcharacter
\reuseencoding[ec]
\enableregime[latin2]
\starttext
\writetolist[chapter]{1}{Dobré ráno}
\expanded{\writetolist[chapter]{2}{Dobré odpoledne}}
\placecontent
\stoptext
---
>
> Now I have solved it using not-stable solution -- I am using triple sequence
> of \expandafter to expand \XMLflush after \chapter instead \expanded. The
> solution is not stable as it is ConTeXt implementation dependent.
>
> On the other side, now I do not know, how to partially expand code
> \chaper{\XMLflush{XMLTag}} to obtain sequence of simple unexpanded chars.
> Simple \expandafter is not sufficient, more \expandafters is dirty trick and
> full expansion (\expanded) leads to TOC entry problem. In TeX source this
> cannot occur (or can occur in strange situations :-), in XML source this is
> almost rule.
>
> Maybe it would be useful to have in XML engine macro, which expands XMLdata
> exactly to get read (original) content (like mine triple \expandafter). Maybe
> such macro already exists and I am a real fool :-)
>
> Thank you for help, have a nice day,
>
> Martin
>
>
>>-Original Message-
>>From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
>>Behalf Of Hans Hagen
>>Sent: Monday, April 03, 2006 11:57 AM
>>To: [EMAIL PROTECTED]; mailing list for ConTeXt users
>>Subject: Re: [NTG-context] Problem with encoding, XML and writetolist...
>>
>>
>>Martin Kolařík wrote:
>>
>>>Aha, here maybe will be the solution :-)
>>>
>>>I'am using standalone Win32 distribution from Pragma and I'm
>>
>>running texexec with --translate=cp1252cs. Typescripts use il2,
>>which corresponds to fonts, of course. If I run the code without
>>XML (if I transcribe XML to \chapter etc.) I get toc entry correctly too.
>>
>>>Where should I look for more? What is natural.ctx?
>>>
>>
>>this is a one-to-one translation vector, and the one standard
>>used by context; forget about all those other mappings, they can
>>be done using regimes; you can use an il2 input regime, and any
>>(resonable) font encoding,
>>
>>Hans
>>
>>-
>> Hans Hagen | PRAGMA ADE
>> Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
>> tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com
>> | www.pragma-pod.nl
>>-
>>
>>___
>>ntg-context mailing list
>>ntg-context@ntg.nl
>>http://www.ntg.nl/mailman/listinfo/ntg-context
>>
>
>
> ___
> ntg-context mailing list
> ntg-context@ntg.nl
> http://www.ntg.nl/mailman/listinfo/ntg-context
--
===
Ing. Vít Zýka, Ph.D. TYPOkvítek
database publishing databazove publikovani
data maintaining and typesetting in typographic quality
priprava dat a jejich sazba v typograficke kvalite
tel.: (+420) 777 198 189 www: http://typokvitek.com
===
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] Problem with encoding, XML and writetolist...
Hans Hagen wrote:
> Vit Zyka wrote:
>
>>Martin Kolařík wrote:
>>
>>
>>>Hi Hans,
>>>
>>>I've analyzed the situation using different combinations of regimes and
>>>encodings, including switching off handling (\donothandleactivecharacter)
>>>and it seems to me, that every text with chars > 127, which is fully
>>>expanded (as in 8bit.tex), must cause difficulties, because TOC entry read
>>>back from TUO is scanned independently and thus spaces are gobbled.
>>>
>>
>>Hi Martin,
>>
>>we have discussed this problem a year ago. In that time I solve it just
>>writing '{}' in each title where was needed, like
>>
>> \chapter{Dobré{} ráno}
>>
>>Now I have cooked an automatic solution. It is not optimal (effective)
>>but working. The only needs is to redefine
>>
>> \def\numcharacter#1{\char#1{}}
>> \let\dochar\numcharacter
>>
>>and to load appropriate encoding file once more. Since it is banned a
>>new macro \reuseencoding was introduce:
>>
>>For Hans:
>>It would be nice if this feature was enabled in a standard distro.
>>Perhaps you will find some more optimal solution...
>>
>>---
>>\unprotected
>>\def\doreuseencoding#1%
>> {\letvalue{\c!file\f!encodingprefix#1}\empty
>>\makeshortfilename[\f!encodingprefix#1]%
>>\startreadingfile
>>\readsysfile\shortfilename
>> {\showmessage\m!encodings2{#1}}
>> {\showmessage\m!encodings3{#1}}%
>>\stopreadingfile}
>>\def\reuseencoding[#1]%
>> {\processcommalist[#1]\doreuseencoding}
>>
>>
>>\def\numcharacter#1{\char#1{}}
>>\let\dochar\numcharacter
>>
>>\reuseencoding[ec]
>>
>>\enableregime[latin2]
>>
>>\starttext
>>\writetolist[chapter]{1}{Dobré ráno}
>>\expanded{\writetolist[chapter]{2}{Dobré odpoledne}}
>>
>>\placecontent
>>\stoptext
>>
>
> the {} may break liguature building (and maybe kerning) ... taco knows ...
Hmmm, that's right.
> I got a brainwave ...
>
> \enableregime[latin2]
>
> \starttext
>
> \def\numcharacter#1{\rawcharacter{#1}}%
> \let\dochar\numcharacter
So there is no need to have only 7-bit chars in tui/tuo etc.? All right,
I think this will be better also for sorting. Sounds promissing.
> \writetolist[chapter]{1}{Dobré ráno}
>
> \expanded{\writetolist[chapter]{2}{Dobré odpoledne}}
>
> \placelist[chapter][criterium=text]
>
> test
>
> \typefile{test.tuo}
>
> \stoptext
>
> this can be sped up (a bit) with
>
> % \dostepwiserecurse{0}{255}{1}
> % {\setevalue{rchr:\recurselevel}{\rawcharacter\recurselevel}}
>
> % \def\rawcharacter#1{\getvalue{rchr:#1}}
>
> this means that all chars are round tripped to themselves in output files!
>
> raw characters are not active and they are therefore equivalent to \char
>
> it's enough then to put
>
> \def\numcharacter#1{\rawcharacter{#1}}%
> \let\dochar\numcharacter
>
> into cont-new.tex
>
> (i will discuss this in more detail with taco later)
All right, thanks Hans,
Vit
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] beta
Mojca Miklavec wrote: > On 4/4/06, Taco Hoekwater wrote: > >> >>Hans Hagen wrote: >> >>>Hi, >>> > > >>>- for mojca: take a look at regi-syn and let me know what vectors need >>>to be be added to the distribution > > >>Mojca, it would be nice if you could give a go/nogo signal quickly. >>I am slowly getting drowned with all the diff files so I am really >>eager to have Hans go ahead and release a new version :) > > > Taco & Hans: I'm really really really sorry. I didn't notice that > question in thousands of mails on the list. > > Thanks a lot for adding the file, Hans! > > This line > \defineregimesynonym[cp-1250] [cp1250] > is not really needed: I never spotted any cp125* with a hyphen > inbetween (in contrast to utf or iso encodings), otherwise everything > seems to be working ok. > > \defineregimesynonym[1250] [cp1250] > is also OK (didn't thought about it ;). > > > If you're asking me about the other changes: here's the same list that > I already suggested: > > renaming: > > windows -> cp1252 > il1 -> iso-8858-1 > latin2 -> iso-8858-2 > iso88595 -> iso-8858-5 ^^ Everywhere should be 8859! Everything else seems all right to me. Vit > grk -> iso-8859-7 > > > And then adding the following definitions (cp1250 is already there): > > \defineregimesynonym[utf-8][utf] > \defineregimesynonym[utf8][utf] > > \defineregimesynonym[windows-1250][cp1250] > \defineregimesynonym[windows-1251][cp1251] > \defineregimesynonym[windows-1252][cp1252] > \defineregimesynonym[windows-1253][cp1253] > \defineregimesynonym[windows-1254][cp1254] > %defineregimesynonym[windows-1255][cp1255] % not supported yet (Hebrew) > %defineregimesynonym[windows-1256][cp1256] % not supported yet (Arabic) > \defineregimesynonym[windows-1257][cp1257] > %defineregimesynonym[windows-1258][cp1258] % not supported yet (Vietnamese) > > % for historical reasons / compatibility > \defineregimesynonym[windows][cp1252] > > % 5 - Cyrillic > % 6 - Arabic (not supported) > % 7 - Greek > % 8 - Hebrew (3 signs missing) > % 11 - Thai (not supported) > > \defineregimesynonym[il1][iso-8859-1] > \defineregimesynonym[il2][iso-8859-2] > \defineregimesynonym[il3][iso-8859-3] > \defineregimesynonym[il4][iso-8859-4] > \defineregimesynonym[il5][iso-8859-9] > \defineregimesynonym[il6][iso-8859-10] > \defineregimesynonym[il7][iso-8859-13] > %defineregimesynonym[il8][iso-8859-14] > \defineregimesynonym[il9][iso-8859-15] > \defineregimesynonym[il10][iso-8859-16] > > \defineregimesynonym[latin1][iso-8859-1] > \defineregimesynonym[latin2][iso-8859-2] > \defineregimesynonym[latin3][iso-8859-3] > \defineregimesynonym[latin4][iso-8859-4] > \defineregimesynonym[latin5][iso-8859-9] > \defineregimesynonym[latin6][iso-8859-10] > \defineregimesynonym[latin7][iso-8859-13] > %defineregimesynonym[latin8][iso-8859-14] > \defineregimesynonym[latin9][iso-8859-15] > \defineregimesynonym[latin10][iso-8859-16] > > % for historical reasons / compatibility > \defineregimesynonym[iso88595][iso-8859-5] > \defineregimesynonym[grk][iso-8859-7] > > > > I don't know whether and how often people use all those encodings (I'm > only pretty sure that people use the cp1250 one). LaTeX offers all of > them for example. I would suggest at least to rename the five regimes > mentioned above and to point to the more consistent names using > synonyms. The mentioned regimes are all present on > http://pub.mojca.org/tex/enco/contextbase/, so it's up to you wheter > you add any of the other regimes to the distribution or perhaps better > wait till someone requests them. (There are so many files that taking > them all would almost require a separate folder.) I'm happy now that > cp1250 is in and I'm not using any other regime, so it's really not my > decision. > > As far as I remember there were also some inconsistencies in the > present greek and cyrillic regime. > http://pub.mojca.org/tex/enco/contextbase/regi-vis.tex is slightly > different than the file in the distro (uses named glyphs), but > conceptually the same. > > Mojca > ___ > ntg-context mailing list > ntg-context@ntg.nl > http://www.ntg.nl/mailman/listinfo/ntg-context > -- === Ing. Vít Zýka, Ph.D. TYPOkvítek database publishing databazove publikovani data maintaining and typesetting in typographic quality priprava dat a jejich sazba v typograficke kvalite tel.: (+420) 777 198 189 www: http://typokvitek.com === ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] feature request: clipping option for externalfigure
Hans Hagen wrote:
> � wrote:
>
>>Hello,
>>I would like to clip an external eps-figure as LaTeX does with the clip
>>option.
>>
>>Please consider the attachment as an example for en eps with white border
>>and the following LaTeX and ConTeXt code:
>>
>>\starttext % no clipping possible here
>>bla bla bla bla bla bla bla bla bla bla bla bla
>>
>>\externalfigure[test-img][width=0.5\textwidth]
>>
>>bla bla bla bla bla bla bla bla bla bla bla bla
>>\stoptext
>>
>>\documentclass{article}
>>\usepackage{graphicx}
>>\begin{document} % here the white border is clipped away
>>bla bla bla bla bla bla bla bla bla bla bla bla
>>
>>\includegraphics[clip,width=0.5\textwidth]{test-img}
>>
>>bla bla bla bla bla bla bla bla bla bla bla bla
>>\end{document}
>>
>>Or is there already such (undocumented) feature?
>>
>>
>
> \clip[nx=10,ny=20,x=2,y=4]{}
>
> and alike (grep for clip)
>
> Hans
Peter was asking for something different, I believe.
\clip do the thing well but you have to measure a bb somewhere, e.g. in
GhostView. Since \externalfigure have to know bb then an option 'clip'
can do that without manual measuring. There might be even en extension:
apart from 'clip' option there could also be 'bb=10 20 100 200' option
for overwritting original boundingbox. Clipping a figures would be a bit
more strightforward.
Vit
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] long style of a row to put in a macro
Hans Hagen wrote:
> olivier Turlier wrote:
>
>>Hi everybody,
>>
>>In writing a glossary of building terms (approx. 400 entries) in a natural
>>TABLE.
>>
>>For each letter, A, B, C, I want a screen background, spanning on 2 colomns,
>>with \bf style, etc. : this leads to a rather long definition that I don't
>>wish
>>to copy on each new letter row, so I made a little macro to recall this setup.
>>
>>This system is not working yet, so i beg your help, TIA for any answer
>>
>>%%%
>>\setupcolors[state=start]
>>
>>\starttext
>>
>>\def\Rowa#1{nc=2,background=color,backgroundcolor=screen,style=\bf,
>>frame=off,align={middle,lohi}{#1}}
>>
>>\bTABLE[frame=off,width=broad,split=yes]
>>\setupTABLE[column][1][style=\bf,align={right,lohi},width=3cm]
>>\setupTABLE[column][2][style=\tf,align={lohi}]
>>
>
> you can say odd/even etc instead of 1,3,5
Thinking about a feature request:
I very frequentely set every third (3,6,9,...) row with gray background
to make wide tables well-arranged. I did it by a loop or with a script
that generates data. Some 'everythird' equivalent to 'even' or 'odd'
would be more strightforward.
Vit
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
[NTG-context] \setupframed[...][...=...]
Hi,
I tied to extend \setupframed[...=...] to also \setupframed[...][...=...]:
-
\unprotect
\def\setupframed{\dodoubleempty\dosetupframed}
\def\dosetupframed{%
\ifsecondargument
[EMAIL PROTECTED]
\else
[EMAIL PROTECTED]
\fi
}
\def\dosinglesetupframed[#1][#2]{\getparameters[\??oi][#1]}
\def\dodoublesetupframed[#1][#2]{%
\bgroup
\def\dodoubleempty{}%
\def\doframed[##1]{##1}%
\xdef\tmp{\getvalue{#1}}%
\egroup
[EMAIL PROTECTED]@[EMAIL PROTECTED]@[EMAIL PROTECTED]@[EMAIL
PROTECTED]@EA[\tmp,#2]}%
}
\protect
\starttext
\setupframed[framecolor=yellow] \framed{A}
\defineframed[myframed][framecolor=blue] \myframed{B}
\setupframe[myframe][framecolor=red] \myframed{C}
\stoptext
-
it works but with fully expansion of options. So it works a bit
differently in a cases
1)
\def\ONorOFF{off}
\defineframed[myframed][frame=\ONorOFF]
\def\ONorOFF{on}\myframed{A}
2)
\def\ONorOFF{off}
\defineframed[myframed][frame=\ONorOFF]
\setupframed[myframe][framecolor=red]
\def\ONorOFF{on}\myframed{A}
Is there some simple solution? Or it has to be rewritten in a way like
other \definesomething[...] (storing every parameter/definition-instance
in a macro)? If sometimes this code would be reviewed I vote for doing
\setupframed in this 'standard' ConTeXt way.
Vit
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] feature request: clipping option for externalfigure
Hans Hagen wrote:
> Vit Zyka wrote:
>
>>Hans Hagen wrote:
>>
>>
>>>� wrote:
>>>
>>>
>>>
>>>>Hello,
>>>>I would like to clip an external eps-figure as LaTeX does with the clip
>>>>option.
>>>>
>>>>Please consider the attachment as an example for en eps with white border
>>>>and the following LaTeX and ConTeXt code:
>>>>
>>>>\starttext % no clipping possible here
>>>>bla bla bla bla bla bla bla bla bla bla bla bla
>>>>
>>>>\externalfigure[test-img][width=0.5\textwidth]
>>>>
>>>>bla bla bla bla bla bla bla bla bla bla bla bla
>>>>\stoptext
>>>>
>>>>\documentclass{article}
>>>>\usepackage{graphicx}
>>>>\begin{document} % here the white border is clipped away
>>>>bla bla bla bla bla bla bla bla bla bla bla bla
>>>>
>>>>\includegraphics[clip,width=0.5\textwidth]{test-img}
>>>>
>>>>bla bla bla bla bla bla bla bla bla bla bla bla
>>>>\end{document}
>>>>
>>>>Or is there already such (undocumented) feature?
>>>>
>>>>
>>>>
>>>
>>>\clip[nx=10,ny=20,x=2,y=4]{}
>>>
>>>and alike (grep for clip)
>>>
>>>Hans
>>>
>>
>>Peter was asking for something different, I believe.
>>
>>\clip do the thing well but you have to measure a bb somewhere, e.g. in
>>GhostView. Since \externalfigure have to know bb then an option 'clip'
>>can do that without manual measuring. There might be even en extension:
>>apart from 'clip' option there could also be 'bb=10 20 100 200' option
>>for overwritting original boundingbox. Clipping a figures would be a bit
>>more strightforward.
>>
>
> i dunno what the intended effect is but here's an example
>
> \starttext
>
> \startuseMPgraphic{test}
> draw fullcircle scaled 4cm withpen pencircle scaled 1cm ;
> setbounds currentpicture to boundingbox fullcircle scaled 4cm ;
> \stopuseMPgraphic
>
> \ruledhbox{\useMPgraphic{test}}
>
> \vskip3cm
>
> \ruledhbox{\clip{\useMPgraphic{test}}}
>
> \stoptext
I see, I did not realize such simple usage of \clip (without options).
That do exactly what was thinking about. One character of typing
difference between:
\clip{\externalfigure{test}}
and
\externalfigure[clip]{test}
is not crutial:) So sorry for noise.
But as far as I know, \clip works only with left|top,width|height
params. Could right|bottom be added (assuming at least one from
left-width-right and top-height-bottom is missing - if not width|height
is ignored)? Or there is again some secret that I missed?
Vit
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] \setupframed[...][...=...]
Hans Hagen wrote:
> Vit Zyka wrote:
>
>>Hi,
>>
>>I tied to extend \setupframed[...=...] to also \setupframed[...][...=...]:
>>
>>-
>>\unprotect
>>\def\setupframed{\dodoubleempty\dosetupframed}
>>\def\dosetupframed{%
>> \ifsecondargument
>> [EMAIL PROTECTED]
>> \else
>> [EMAIL PROTECTED]
>> \fi
>>}
>>\def\dosinglesetupframed[#1][#2]{\getparameters[\??oi][#1]}
>>\def\dodoublesetupframed[#1][#2]{%
>> \bgroup
>> \def\dodoubleempty{}%
>> \def\doframed[##1]{##1}%
>> \xdef\tmp{\getvalue{#1}}%
>> \egroup
>>
>>[EMAIL PROTECTED]@[EMAIL PROTECTED]@[EMAIL PROTECTED]@[EMAIL
>>PROTECTED]@EA[\tmp,#2]}%
>>}
>>\protect
>>
>>\starttext
>>\setupframed[framecolor=yellow] \framed{A}
>>\defineframed[myframed][framecolor=blue] \myframed{B}
>>\setupframe[myframe][framecolor=red] \myframed{C}
>>\stoptext
>>-
>>
>>it works but with fully expansion of options. So it works a bit
>>differently in a cases
>>1)
>>\def\ONorOFF{off}
>>\defineframed[myframed][frame=\ONorOFF]
>>\def\ONorOFF{on}\myframed{A}
>>
>>2)
>>\def\ONorOFF{off}
>>\defineframed[myframed][frame=\ONorOFF]
>>\setupframed[myframe][framecolor=red]
>>\def\ONorOFF{on}\myframed{A}
>>
>>Is there some simple solution? Or it has to be rewritten in a way like
>>other \definesomething[...] (storing every parameter/definition-instance
>>in a macro)? If sometimes this code would be reviewed I vote for doing
>>\setupframed in this 'standard' ConTeXt way.
>>
>>
>
> next time post with less typos -)
Sorry, next time I try to choose better time then 3 o'clock at night.
> anyway, here is a working solution:
>
> \unprotect
>
> \def\setupframed
> {\dodoubleempty\dosetupframed}
>
> \def\dosetupframed
> {\ifsecondargument
> [EMAIL PROTECTED]
>\else
> [EMAIL PROTECTED]
>\fi}
>
> \def\dosinglesetupframed[#1][#2]%
> {\getparameters[\??oi][#1]}
>
> \def\dodoublesetupframed[#1][#2]%
> {\bgroup
>\let\dodoubleempty\empty
>
> \def\doframed[##1]{\gdef\globalredefinedframed{\dodoubleempty\doframed[##1,#2]}}%
>\getvalue{#1}%
>\egroup
>\letvalue{#1}\globalredefinedframed}
>
> \protect
Clever.
> keep in mind that some 100 setups of the same instance may lead to rather big
> definitions
Yes, but no problem, I need only one (or two) resetuping after definition.
> \setupcolors[state=start]
>
> \starttext
> \setupframed[framecolor=yellow] \framed{A}
> \defineframed[myframed][framecolor=blue] \myframed{B}
> \setupframed[myframed][framecolor=red]\myframed{C}
> \stoptext
>
> i need to think about adding this, since it may break other things (i will
> run it for a while)
All right.
> you can add such patches to cont-loc.tex which is not distributed but read at
> runtime
I see, I did not know about this file. Fine.
Thanks Hans,
Vit
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] \setupframed[...][...=...]
Hans Hagen wrote:
> Vit Zyka wrote:
>
>>Is there some simple solution? Or it has to be rewritten in a way like
>>other \definesomething[...] (storing every parameter/definition-instance
>>
>
> btw, there is (beware: use some unique name):
>
> \presetlocalframed[myframed]
> \setuplocalframed[myframed][width=4cm,height=2cm]
> \localframed[myframed][framecolor=green]{oeps}
localframed was a mysterious stuff for me.
It seems do exactly what I wanted. In this perspective the
\setupframed[...][...=...] is not needed (only for not being suprised
since its absence is a bit against context filosofy).
I just wanted to fill texshow web, but it is missing this stuff. So I
added \*localframed note in missing texshow items on wiki.
Vit
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] \setupframed[...][...=...]
Hans Hagen wrote:
> Vit Zyka wrote:
>
>>Hans Hagen wrote:
>>
>>
>>>Vit Zyka wrote:
>>>
>>>
>>>
>>>>Is there some simple solution? Or it has to be rewritten in a way like
>>>>other \definesomething[...] (storing every parameter/definition-instance
>>>>
>>>>
>>>
>>>btw, there is (beware: use some unique name):
>>>
>>>\presetlocalframed[myframed]
>>>\setuplocalframed[myframed][width=4cm,height=2cm]
>>>\localframed[myframed][framecolor=green]{oeps}
>>>
>>
>>localframed was a mysterious stuff for me.
>>
>>It seems do exactly what I wanted. In this perspective the
>>\setupframed[...][...=...] is not needed (only for not being suprised
>>since its absence is a bit against context filosofy).
>>
>>I just wanted to fill texshow web, but it is missing this stuff. So I
>>added \*localframed note in missing texshow items on wiki.
>>
>
> it actually is a low level command, also, there is \defineframedtext which is
> (1) configurable and (2) provided \myframed as well
>
> Hans
And the content of \framed and \framedtext is formated the same way?
Hmm I am a bit confused with \framed v. \localframed v. \framedtext. If
the difference is only in an interface or even in functionality. I will
have to study the code but not time for that now.
Thanks for this note.
Vit
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
[NTG-context] feature request: \everytrypass
Dear ConTeXters,
I am counting occurence of some macro in the text. Problem is when this
macro is inside \bTABLE (and may be somewhere else). Due to try passes
the increment is counter is incremented more then once and the result is
multiplied.
It is possible to implement some \everytrypass in which user can (e.g.)
null incrementing? Or there is some another solution?
Thanks
Vit
Minimal example:
---
\newcount\C
\def\doIncrement{\global\advance\C by1\relax}
% \def\nullIncrement{\let\doIncrement\relax}
% \appendtoks \nullIncrement to \everytrypass
\starttext
\bTABLE
\bTR\bTD Counter\doIncrement\eTD\eTR
\eTABLE
\message{ <> }%
\stoptext
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] feature request: \everytrypass
Peter Rolf wrote:
> Vit Zyka wrote:
>> Dear ConTeXters,
>>
>> I am counting occurence of some macro in the text. Problem is when this
>> macro is inside \bTABLE (and may be somewhere else). Due to try passes
>> the increment is counter is incremented more then once and the result is
>> multiplied.
>>
>> It is possible to implement some \everytrypass in which user can (e.g.)
>> null incrementing? Or there is some another solution?
>>
>> Thanks
>> Vit
>>
>> Minimal example:
>> ---
>> \newcount\C
>> \def\doIncrement{\global\advance\C by1\relax}
>
> \def\doIncrement{\iftrialtypesetting
> \else\global\advance\C by1\relax\fi}%
>
> donno if this works correctly inside a TABLE...
Oh, it is already done! ... How I was able to think in opposite...
Seems it works correctly in TABLE.
... but there is (at least) two \trialtypesettingtrue missing in caption
composition. Bellow is the patch (see VZ comment marks).
Thanks Peter
Vit
--
\def\dopreparestackcaptionaut#1#2#3#4%
{\doifsomething\@@kjkjalign
{\ExpandBothAfter\doifnotinset\v!middle\@@kjkjalign
{\let\captionovershoot\!!zeropoint}}%
\edef\captionhsize{\the\wd\tempfloatbox}%
\ifdim\captionhsize>\hsize
% float is wider than \hsize
\dosetraggedvbox\@@kjkjalign
\setbox\scratchbox\raggedbox % trial run
{\hsize\captionhsize
\trialtypesettingtrue % VZ
\notesenabledfalse
\putcompletecaption{#4}{#2}{#3}{0}}%
\ifdim\ht\scratchbox>\lineheight % more lines
\dosetraggedvbox\@@kjkjalign
\setbox\tempcaptionbox\raggedbox
{\hsize\captionhsize
\advance\hsize -\captionovershoot\relax
\ifdim\hsize<\captionminwidth\relax
\hsize\captionhsize
\fi
\putcompletecaption{#4}{#2}{#3}{0}}%
\else
\setbox\tempcaptionbox\raggedbox
{\hsize\captionhsize
\putcompletecaption{#4}{#2}{#3}{0}}%
\fi
\else
% float is smaller of equal to \hsize
\ifdim\captionhsize<\captionminwidth\relax
\scratchdimen\captionminwidth % float smaller than min width
\edef\captionhsize{\the\scratchdimen}%
\fi
\setbox\scratchbox\vbox % test with overshoot
{\scratchdimen\captionhsize
\trialtypesettingtrue % VZ
\advance\scratchdimen \captionovershoot
\advance\scratchdimen 3em % an average word length
\ifdim\scratchdimen<\hsize \hsize\scratchdimen \fi
\notesenabledfalse
\putcompletecaption{#4}{#2}{#3}{0}}%
\ifdim\ht\scratchbox>\lineheight
% at least an average word longer than a line
\dosetraggedvbox\@@kjkjalign
\setbox\tempcaptionbox\raggedbox
{\scratchdimen\captionhsize
\advance\scratchdimen \captionovershoot
\ifdim\scratchdimen<\hsize \hsize\scratchdimen \fi
\putcompletecaption{#4}{#2}{#3}{0}}%
\else
% just over a line, don't use an overshoot
\expanded{\doifcommonelse{\@@kjkjalign}}{\v!left,\v!right,\v!flushleft,\v!flushright}
{\dosetraggedvbox\@@kjkjalign
\setbox\tempcaptionbox\raggedbox
{\hsize\captionhsize
% strange : \raggedcenter
\putcompletecaption{#4}{#2}{#3}{0}}}
{% nicer
\setbox\tempcaptionbox\cbox
{\hsize\captionhsize
\putcompletecaption{#4}{#2}{#3}{0}}}%
\fi
\fi}
>
> Greets, Peter
>
>> % \def\nullIncrement{\let\doIncrement\relax}
>> % \appendtoks \nullIncrement to \everytrypass
>>
>> \starttext
>>\bTABLE
>> \bTR\bTD Counter\doIncrement\eTD\eTR
>>\eTABLE
>>\message{ <> }%
>> \stoptext
>>
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] More Feature Requests for math
Aditya Mahajan wrote: > Hi Hans, > > 1. Allow \definematrix and \definemathcases to have a parameter > displaystyle or textstyle. Right now, everything is in textstyle. > ... > I don't know which syntax is better displaystyle=on|off (yes|no) or > [mathstyle=display|text]. I vote for [mathstyle=display|text] in such cases. It is more descriptive in the reference list like tex-show (showing all option variants on a single line; displaystyle=on|off does not say there is any other 'textstyle'). Moreover, I pernamently forget which option use on|off and which yes|no. Vit ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
[NTG-context] notes on columnset typesetting (not only about)
Dear ConTeXters,
surprisingly, in this e-mail you will find any bug report! It is a
summary of my experience with typesetting of a little complex book
layout. I have finnished it during a one year long winning battle. Thank
to everybody who helped, especially of course to Hans.
Thank you very much!
--
Next text can show, what is in present ConTeXt (or a bit older one)
possible and what is still problematic.
Firstly, let us show some examples:
- transparency frames
ftp://cmp.felk.cvut.cz/pub/cmp/users/zyka/vg-ex/vg05-ex-body1.pdf
- two columnsets + marginals + figures + balancing
ftp://cmp.felk.cvut.cz/pub/cmp/users/zyka/vg-ex/vg05-ex-body2.pdf
- two columnsets + page float
ftp://cmp.felk.cvut.cz/pub/cmp/users/zyka/vg-ex/vg05-ex-body3.pdf
- three columnsets + floats
ftp://cmp.felk.cvut.cz/pub/cmp/users/zyka/vg-ex/vg05-ex-encyk.pdf
- content
ftp://cmp.felk.cvut.cz/pub/cmp/users/zyka/vg-ex/vg05-ex-content.pdf
- index
ftp://cmp.felk.cvut.cz/pub/cmp/users/zyka/vg-ex/vg05-ex-index.pdf
Legend for comming comments:
+ pros
- cons
? dreaming about new feature
! attention
= my (perhaps suboptimal) solution
* note
Comments:
> grid
+ very powerfull and working support
+ works gracefully with columnsets and floats
* avoiding orphans and widows was done manually by:
= enlarging/decreasing figures
= adding/removing (half)blank lines around heads
? if we want to do avoiding orphans and widows automatically,
we would probably need the glue with DISCRETE STEP of
stretch/shrink.
Then we can say e.g.
\let\bl=\baselineskip
\setuphead
[section]
[before=\vskip1\bl plus1\bl withstep1\bl]
to get vertical space before section head exactly 1 OR 2
\baselineskip height.
Another solution with stepwise box:
\vbox to2\bl plus2\bl withstep1\bl{\vfil heading \vfil}
! the only problem was in the table of contents + columns;
from the first line there was a small shift between columns;
perhaps \splittopskip? but setting it to large enough value
does not solve it.
> columnsets
+ very nice feature, really;
after Hans improvement seems that some floats soes not dissappered
now, but need to be carefull
+ floats insertion with specifying place
? for top float: automatically setting \placeongrid[{broad,high}]
for bottom float \placeongrid[{broad,low}]
to be vertically align with text on the rest of column(s)
* balancing: only manually by setting:
\setupcolumnsetlines[columnset_id][columnset_page][column][line]
! Not so painful if it not occures next: If there are many
floats near balancing place they sometimes disappear or cause ignoring
balancing - even if they can fit on the place.
? understand that automatical balancing with floats is extremly
difficult
* page floats: big improvements during the work.
! running marginal text continue through the page with only float
= so you have to manually insert blank vertical margin on such place
* header & footers: Hans did a new column marking:
\getmarking[marking_id][column][last/first].
! There are some problems [perhaps with expansion (different
counter number and text)] if marking goes between two columnsets (framed
chapters cross two cols in examples).
= found acceptable hack but need more ivestigation on small
examples for cleaning.
> metapost inclusion
+ the most powerful, smooth and stable part of ConTeXt in my opinion
(see random frames, circles with transparent graphics, lines with color
shading)
= if you have many (over 1024!) shadings (-> MP specials) do
\settrue \manyMPspecials
> index (register)
+ nice possibility to differentiate several groups (here 8 from which
4 have different visual marking of page number, see index example)
- sorting: until this spring there was no satisfied backround for
Czech sorting in newtexutil.rb till this spring.
= I did dirty reimplementation of old texutil.pl for doing so
* I have to have a look for new sorting now.
- coupling: page numbers with group preserving (see example)
= also in texutil.pl reimplementation
> regime
* my great discovery was that the regime IS
\enableregime{latin2} % correct
and NOT
\enableregime{il2} % incorrect!
> pseudo-small caps
= http://wiki.contextgarden.net/Pseudo_Small_Caps
> ...
I provide the environment files (design definition) in case of
somebody's interest. But suddenly they are very very very dirty.
Partially due to my unsufficient ConTeXt knowledge, partially due to my
despair during trying many ways to solve some problem, partially due to
putting pathes to old ConTeXt (it was fresh of course when the work
begins), ...:
ftp://cmp.felk.cvut.cz/pub/cmp/users/zyka/vg-ex/vg05-env.tex (core)
ftp://cmp.felk.cvut.cz/pub/cmp/users/zyka/vg-ex/vg05-mark.tex (markup)
Best
Vit
_
Re: [NTG-context] notes on columnset typesetting (not only about)
batela wrote: > Many thanks for sharing your env file. I'm trying to use that making > some projects and components files. But every-time I run texexec I > found a error message. For fixing that I will need to include the files > vz-cont.tex and vg05-general. Hi she/he Batela, you are right (vz-cont contains my local settings, abbreviations and some macro patches related to current instalation; vg05-general contains Czech hyphenation exceptions and balancing definitions like: \setupcolumnsetlines[Rok-2][4][1][45] \setupcolumnsetlines[Rok-2][4][2][45] ). In closer view you will find even more included files like member list generated from XML and used for full name expansion to index. But there are provided all files that define design and can illustrate solutions. Take them as an inspiration and an example how to use some construct. I personally do not try to compile it with todays ConTeXt. > Did you can provide me some complete example of your work? So, the answer is no. Vit ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] notes on columnset typesetting (not only about)
Hans Hagen wrote:
> Vit Zyka wrote:
>> Firstly, let us show some examples:
>> - transparency frames
>>ftp://cmp.felk.cvut.cz/pub/cmp/users/zyka/vg-ex/vg05-ex-body1.pdf
>> - two columnsets + marginals + figures + balancing
>>ftp://cmp.felk.cvut.cz/pub/cmp/users/zyka/vg-ex/vg05-ex-body2.pdf
>> - two columnsets + page float
>>ftp://cmp.felk.cvut.cz/pub/cmp/users/zyka/vg-ex/vg05-ex-body3.pdf
>> - three columnsets + floats
>>ftp://cmp.felk.cvut.cz/pub/cmp/users/zyka/vg-ex/vg05-ex-encyk.pdf
>> - content
>>ftp://cmp.felk.cvut.cz/pub/cmp/users/zyka/vg-ex/vg05-ex-content.pdf
>> - index
>>ftp://cmp.felk.cvut.cz/pub/cmp/users/zyka/vg-ex/vg05-ex-index.pdf
>>
> nice; how about an article on such a project for the maps/tugboat
hmmm, I will think about it. But in the summer time I want to spent my
spare time by beginners manual translation...
>> Comments:
>> > grid
>>? if we want to do avoiding orphans and widows automatically,
>> we would probably need the glue with DISCRETE STEP of
>> stretch/shrink.
>> Then we can say e.g.
>>\let\bl=\baselineskip
>>\setuphead
>> [section]
>> [before=\vskip1\bl plus1\bl withstep1\bl]
>> to get vertical space before section head exactly 1 OR 2
>> \baselineskip height.
>> Another solution with stepwise box:
>>\vbox to2\bl plus2\bl withstep1\bl{\vfil heading \vfil}
>>
> hm, worth investigating but maybe wait for what pdftex will bring some
> day soon
you mean things about lua?
>>! the only problem was in the table of contents + columns;
>> from the first line there was a small shift between columns;
>> perhaps \splittopskip? but setting it to large enough value
>> does not solve it.
>>
> could be; actually i wish i'd set topskip to strutheight by default
> which would make life way easier
perhaps; but imagine different strutheight in different columns (each
column top line contains different font size - in the content it can be
very frequent if each head level is typeset with diferent size); what about
\setupcolumns[topskip=dimen|font] if font is given, dimen is calc
>> after Hans improvement seems that some floats soes not dissappered
>> now, but need to be carefull
>>
> i think that indeed some floats get lost bugs were solved but it's
> always a bit tricky with left-overs
>>+ floats insertion with specifying place
>> ? for top float: automatically setting \placeongrid[{broad,high}]
>>for bottom float \placeongrid[{broad,low}]
>>to be vertically align with text on the rest of column(s)
>>
> there is some control possible, so remind me when you need it again
> (\OTRSETprepareforcolumnslot permits log/middle/high handling but it's
> not keyword driven (yet)
OK.
>>* balancing: only manually by setting:
>> \setupcolumnsetlines[columnset_id][columnset_page][column][line]
>> ! Not so painful if it not occures next: If there are many
>> floats near balancing place they sometimes disappear or cause ignoring
>> balancing - even if they can fit on the place.
>> ? understand that automatical balancing with floats is extremly
>> difficult
>>
> indeed
>>* page floats: big improvements during the work.
>> ! running marginal text continue through the page with only float
>> = so you have to manually insert blank vertical margin on such place
>>* header & footers: Hans did a new column marking:
>> \getmarking[marking_id][column][last/first].
>> ! There are some problems [perhaps with expansion (different
>> counter number and text)] if marking goes between two columnsets (framed
>> chapters cross two cols in examples).
>>
> hm, some day ...
>> = found acceptable hack but need more ivestigation on small
>> examples for cleaning.
>>
> ok
>> > metapost inclusion
>>+ the most powerful, smooth and stable part of ConTeXt in my opinion
>> (see random frames, circles with transparent graphics, lines with color
>> shading)
>>
>>= if you have many (over 1024!) shadings (-> MP specials) do
>> \settrue \manyMPspecials
>>
> this is the default now (today i played with persistent mp runs and that
> will speed up runtime processing enourmously)
what is persistent mp run? It means mp that has not changed since
previous run? It would be great. (btw compilation the whole book takes
about 20 min on 3.2 Ghz AMD.)
Vit
>>> index (register)
>>&g
Re: [NTG-context] Font size in FLOWchart module.
John R. Culleton wrote:
> On Monday 08 August 2005 07:59, Hans Hagen wrote:
>> Vit Zyka wrote:
>>> John R. Culleton wrote:
>>>> I am using the flowchart module to create various goodies. What
>>>> I don't know how to do is regulate the size of the font for the
>>>> text that goes inside the little boxes. Any suggestions?
>>> I do not known any other way but put the size/style together with text:
>>>
>>> \startFLOWcell
>>> \name{Obs}
>>> \location{1,1}
>>> \shape{action}
>>> \text{{\switchtobodyfont[16pt]\bf Text in cell}}
>>> \stopFLOWcell
>>>
>>> If you want to be consistent over several cells, define a macro.
>>> vit
>> in m-chart you will find:
>>
>> \setupFLOWcharts
>> [\c!option=,
>>\c!bodyfont=,
>>\c!dot=, % private option
>>\c!width=12\bodyfontsize,
>>\c!height=7\bodyfontsize,
>>\c!maxwidth=,
>>\c!maxheight=,
>>\c!offset=\v!standard, % == auto offset
>>\c!dx=2\bodyfontsize,
>>\c!dy=2\bodyfontsize,
>>\c!nx=0, % 1,
>>\c!ny=0, % 1,
>>\c!x=1,
>>\c!y=1,
>>\c!autofocus=,
>>\c!focus=,
>>\c!background=, % \v!color,
>>\c!backgroundcolor=\s!white,
>>\c!rulethickness=\linewidth,
>>\c!frame=\v!off,
>>\c!framecolor=]
>>
>> \setupFLOWlines
>> [\c!corner=\v!round,
>>\c!arrow=\v!yes,
>>\c!dash=\v!no,
>>\c!radius=.375\bodyfontsize, % 2.5\c!rulethickness
>>\c!color=FLOWlinecolor,
>>\c!rulethickness=.15\bodyfontsize, % 2pt,
>>\c!offset=\v!none]
>>
>> \setupFLOWshapes
>> [\c!default=action,
>>\c!framecolor=FLOWframecolor,
>>\c!background=\v!color,
>>\c!backgroundcolor=FLOWbackgroundcolor,
>>\c!backgroundscreen=\@@rsscreen,
>>\c!rulethickness=.15\bodyfontsize, % 2pt,
>>\c!offset=.5\bodyfontsize]
>>
>> \setupFLOWfocus
>> [\c!framecolor=FLOWfocuscolor,
>>\c!background=\@@FLOSbackground,
>>\c!backgroundcolor=\@@FLOSbackgroundcolor,
>>\c!backgroundscreen=\@@FLOSbackgroundscreen,
>>\c!rulethickness=\@@FLOSrulethickness,
>>\c!offset=\@@FLOSoffset]
>>
>> \definecolor [FLOWfocuscolor] [s=.2]
>> \definecolor [FLOWlinecolor] [s=.5]
>> \definecolor [FLOWframecolor] [s=.7]
>> \definecolor [FLOWbackgroundcolor] [s=.9]
>>
>> so guess ... what variable can be used to set the bodyfont
>>
>> Hans
>
> Revisiting this question after an absence I tried redefining
> various values from the above list within \setupFLOWcharts. None
> worked. No doubt there is a magic combination I missed. But more
> than one user has been perplexed by this.
>
> You know I never did figure out the answer to this one. And
> factors such as \tfd were still too small. So I used the
John, I guess you have
maxwidth=\textwidth
and your natural chart is wider then \textwidth, is't it?
What happens if you put away maxwidth?
Vit
> TeX primitive:
> \font\cx=bchr8r at 10pt
> external to any other macro
> and for each text string in the chart definition
> I used the \cx prefix. This was simple,
> controllable, and did not interact with anything else. And the
> font came out at the expected size.
>
> A better (more Contextish) solution is still requested.
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] ec encoding and tcaron
Michal Kvasnicka wrote: > Hi Richard. >> I'm sure the EC encoding contains the 'tcaron' character (see the >> lm-ec.enc file for example). >> I have ConTeXt on top of TeXLive 2005. >> I can find: >> texmf/fonts/enc/dvips/base/ec.enc >> texmf/fonts/enc/dvips/lm/ec-lm.enc >> texmf/fonts/enc/dvips/lm/lm-ec.enc >> >> I use EC normally for typesetting Czech documents. So I would suggest >> to use EC ;-) > I'm sorry you're not right. The lm-ec.enc really includes tcaron, but > neither ec.enc nor EC.enc does, at least at my teTeX 3.0. If you use I believe this bug was fixed more then a year ago. The names of ec-lm and lm-ec was changed during a time a year ago. teTeX 3.0 has not changed since last year since it is dead. Vit > only LatinModern, it works, because lm-ec.enc is used. But I doubt it > works well for other fonts. Does it? I was unsuccessful. Can you send me > your ec.enc file please? > > Yours > Michal Kvasnicka > > P.S. It's nice to hear that more Czech use the ConTeXt. ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] frontmatter
Willi Egger wrote:
> Hi Wolfgang,
>
> I tried your code. Indeed there is no blank page after the "Schmutztitel".
> So you need to add to the \startstandardmakeup[page=yes]. - Something
Moreover:
page=yes|right|... makes the same page break setting to both place:
start...matter and stop...matter. I ussually need a different setting.
For now I am solving it by
\setupsectionblock
[frontpart]
[page=right,
after={\setvalue{\??sb\@@sectionblock\c!page}{}}]
but it is not elegant. Can be introduced pagestart|pagestop?
Vit
> fuzzy is at hand with grid=yes.
> If you comment this line then the output is as expected.
>
>
> Willi
>
>
> [EMAIL PROTECTED] wrote:
>> Hallo!
>>
>> I am trying to use 'standardmakeup' to produce 'Schmutztitel'-page
>> with a following blank page. I think this is what
>> \start\stopstandardmakeup is for (in doublesided environments).
>>
>> But the example bellow has first a blank page and then
>> 'Schmutztitel'.
>>
>> There is a fourth blank page too.
>>
>> -
>> \setuppagenumbering [alternative=doublesided]
>> \setuplayout [
>> footer=.04\paperheight, %1
>> grid=yes, %2
>> marking=on,
>> location=middle,
>> width=middle,
>> height=middle]
>> \starttext
>> \startfrontmatter %3
>> \startstandardmakeup
>> Schmutztitel
>> \stopstandardmakeup
>> \stopfrontmatter%3
>> bla
>> \stoptext
>> -
>>
>> My experiments:
>>
>> - a space-char between 'doublesided' and ']' removes the last blank
>> page (strange).
>>
>> - uncommenting the lines in position 1,2,3 exclusivly results in the
>> correct behaviour.
>>
>> I would like to understand what the problem is and why, for example,
>> uncommenting frontmatter solves the problem.
>>
>> I thought frontmatter is the place to do title-things and so.
>>
>> Grüße, Wolfgang
>> ___
>> ntg-context mailing list
>> ntg-context@ntg.nl
>> http://www.ntg.nl/mailman/listinfo/ntg-context
>>
> ___
> ntg-context mailing list
> ntg-context@ntg.nl
> http://www.ntg.nl/mailman/listinfo/ntg-context
>
--
===
Ing. Vít Zýka, Ph.D. TYPOkvítek
database publishing databazove publikovani
data maintaining and typesetting in typographic quality
priprava dat a jejich sazba v typograficke kvalite
tel.: (+420) 777 198 189 www: http://typokvitek.com
===
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] How to increase left and right padding of cells in a natural table?
Nicolas Grilly wrote: > Hello, > > I'm using natural tables (\bTABLE ... \eTABLE) and/ /I want to increase > the space between the cells borders and the text inside the cells (CSS > calls that left-padding and right-padding). > > I didn't use parameter "offset" because I want to increase only left and > right padding. I don't want to increase top and bottom padding. Let try offset=2pt,% hor+vert each cell distance=\zeropoint, % individual column columndistance=\zeropoint, % each column (whole table) leftmargindistance=\zeropoint, % whole table rightmargindistance=\zeropoint,% whole table Vit ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] How to increase left and right padding of cells in a natural table?
Hans Hagen wrote:
> Nicolas Grilly wrote:
>> Vit,
>>
>> I just tried your solution, but it doesn't work: it adds space to the four
>> side of table cells. But I want to add space ONLY TO LEFT AND RIGHT, not to
>> top and bottom, like in the following illustration:
>>
>> -
>> |My text|
>> -
>>
> inside the cell
>
> \leftskip1em \rightskip\leftskip
Not to four sides but between columns. Rows distance is not affected.
But you are right it does not increase distance between text and cell
frame. Since natural tables uses \framed construct in each cell and
\framed has no 'before'/'after'/'hoffset'/'leftoffset'/'rightoffset' it
can not be simply set for whole natural table.
Solution?
a) quick:
\bTD \hskip1cm Second movie \hskip2cm\null\eTD
or with macro:
\newdimen\lOffset \lOffset=1cm
\newdimen\rOffset \rOffset=2cm
\def\myNatTabCell#1{\bTD\hskip\lOffset#1\hskip\rOffset\null\eTD}
...
\myNatTabCell{Second movie}
...
b) systematic
create alternative \extframed with 'before', 'after', 'hoffset',
'leftoffset', 'rightoffset', 'voffset', 'topoffset', 'bottomoffset'
and add switches:
\bTABLE[alternative=extframed,leftoffset=1cm,rightoffset=2cm]
Vit
Minimal example:
---
\starttext
\bTABLE[frame=on]
\bTR
\bTH My Title \eTH
\bTH Your title \eTH
\eTR
\bTR
\bTD First try \eTD
\bTD Second try \eTD
\eTR
\bTR
\bTD First movie \eTD
\bTD \hskip1cm Second movie \hskip2cm\null\eTD
\eTR
\eTABLE
\stoptext
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] frontmatter
Hans Hagen wrote:
> Vit Zyka wrote:
>> Willi Egger wrote:
>>
>>> Hi Wolfgang,
>>>
>>> I tried your code. Indeed there is no blank page after the "Schmutztitel".
>>> So you need to add to the \startstandardmakeup[page=yes]. - Something
>>>
>> Moreover:
>>
>> page=yes|right|... makes the same page break setting to both place:
>> start...matter and stop...matter. I ussually need a different setting.
>> For now I am solving it by
>>
>> \setupsectionblock
>>[frontpart]
>>[page=right,
>> after={\setvalue{\??sb\@@sectionblock\c!page}{}}]
>>
> the problem has to do with an overflow of makeup in grid mode (due to already
> present mark reset nodes); i uploaded a beta that (hopefully) corrects the
> problem (thanks to taco for analyzing that it was textheight related)
>
> Hans
Good news the bug was fixed.
What I proposed was not related to mentioned error. It just recalled me
this problem of coupled 'page' option and the need to be split.
Vit
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] frontmatter
[EMAIL PROTECTED] wrote:
> I tried your code. Indeed there is no blank page after the
>> "Schmutztitel".
> So you need to add to the \startstandardmakeup[page=yes]. -
>> Something
>
Moreover:
page=yes|right|... makes the same page break setting to both
>> place:
start...matter and stop...matter. I ussually need a different
>> setting.
For now I am solving it by
\setupsectionblock
[frontpart]
[page=right,
after={\setvalue{\??sb\@@sectionblock\c!page}{}}]
>>> the problem has to do with an overflow of makeup in grid mode (due
>> to already present mark reset nodes); i uploaded a beta that
>> (hopefully) corrects the problem (thanks to taco for analyzing that
>> it was textheight related)
>>> Hans
>> Good news the bug was fixed.
>>
>> What I proposed was not related to mentioned error. It just recalled
>> me
>> this problem of coupled 'page' option and the need to be split.
>>
>> Vit
>
> Can you make a little example where a split 'page' option is from
> use?
When you want the frontmatter starts et right (odd) page and mainmatter
at arbitrary one.
Setting:
\setupsectionblock[frontpart][page=right]
put
\page[right]
at
\startfrontmatter
and also at
\stopfrontmatter
and that is why following mainmatter may skip even page starting at
right one. My solution is above but it is not user friendly.
Vit
> Wolfgang
> ___
> ntg-context mailing list
> ntg-context@ntg.nl
> http://www.ntg.nl/mailman/listinfo/ntg-context
>
--
===
Ing. Vít Zýka, Ph.D. TYPOkvítek
database publishing databazove publikovani
data maintaining and typesetting in typographic quality
priprava dat a jejich sazba v typograficke kvalite
tel.: (+420) 777 198 189 www: http://typokvitek.com
===
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] small caps italic and font switching inside math
Mojca Miklavec wrote:
> On 7/1/06, Taco Hoekwater wrote:
>> Mojca Miklavec wrote:
>>> On 6/29/06, Taco Hoekwater >>
{\bf A test \variant[Caps] in small caps}
>>> Does this work on your computer? (I don't get any caps here.)
>> No it doesn't, it was a leftover from a failed experiment
I did not follow the thread closely but can it help you
http://wiki.contextgarden.net/Pseudo_Small_Caps
?
vit
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] base/tex.rb comments
Hans Hagen wrote:
> Richard Gabriel wrote:
>> Hello Hans and others,
>>
>> I'd have two comments to the texmf/scripts/context/ruby/base/tex.rb
>> script.
>>
>> 1. I find quite impractical that the formats (cont-en, cont-nl etc.)
>> are hardcoded in the scripts. When one wants to add a new format, then
>> he must add it on 4 or 5 places in the script, and do it again and
>> again everytime when upgrading ConTeXt. :-(
> well, we can use:
>
> def validsomething(str,something)
> if str then
> list = [str].flatten.collect do |s|
> something[s] || s # || s added
> end .compact.uniq
> if list.length>0 then
> if str.class == String then list.first else list end
> else
> false
> end
> else
> false
> end
> end
>
> and then you can say
>
> texexec --all --make --texformats=cont-xx
>
> given that you have cont-xx.tex
>
>> 2. Maybe this is an OS and TeX distribution specific issue...
>> I use TeXLive 2005 on Windows XP.
>> The TeX formats are located in C:\TeXLive\texmf-var\web2c. [the
>> "kpsewhich --show-path=fmt" command also shows this path].
>> When generating a format using "texmfstart texexec --make en", the
>> generated format is placed into C:\TeXLive\texmf-var\web2c\pdfetex.
>> Then, when trying to use the format, it is not found...
>>
>> This is done on line 547 of tex.rb:
>>
>> texformatpath = if getvariable('local') then '.' else
>> Kpse.formatpath(texengine,true) end
>>
>> So I've changed it to "Kpse.formatpath(texengine,false)" and
>> everything is fine.
>>
>> But I don't understand why it is set so by default and why it doesn't
>> work for me.
>> Does anybody experience the same problem?
> we really need the engine path so i wonder why the format
> is not found; maybe an error in the cnf file (should recursively
> search the web2c path for formats)
I have the same observation. The TeXLive 2005 definition is
TEXFORMATS = .;$TEXMF/web2c/{$engine,}
but it seems to me tex binaries do not set $engine variable. If so, it
can be locally solved (without changing binaries and supposing not using
xetex or another engine) by
TEXFORMATS = .;$TEXMF/web2c//
Vit
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
[NTG-context] shortsetup and environment (resent from dev-context)
Hi Hans and others,
I have tried to find the solution of the problem described by minimal
example bellow without success.
(Parsing XML database cont-en.xml, every 'cd:command' with
'type=environment' have to be defined with 'start' prefix. As far as I
could check it is done OK. But \start commands are not known for
\shortsetups.)
It is needed for Beginners' manual. Please can you have a look at it?
Thanks
Vit
Original Message
Subject: shortsetup and environment
Date: Mon, 18 Sep 2006 01:08:03 +0200
From: Vit Zyka <[EMAIL PROTECTED]>
To: dev-context@ntg.nl
Dear Hans,
it seems to me that \shortsetup ignores cd:command with
type="environment". Please see the next example:
-
\usemodule[set-11] \loadsetups
\starttext
page (OK): \shortsetup{page}
startframedtext (NOTHING): \shortsetup{startframedtext}
framedtext (NOTHING): \shortsetup{framedtext}
\stoptext
--
Vit
--
===
Ing. Vít Zýka, Ph.D. TYPOkvítek
database publishing databazove publikovani
data maintaining and typesetting in typographic quality
priprava dat a jejich sazba v typograficke kvalite
tel.: (+420) 777 198 189 www: http://typokvitek.com
===
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] [dev-context] shortsetup and environment
Wolfgang Schuster wrote:
> On Mon, 18 Sep 2006 01:08:03 +0200
> Vit Zyka <[EMAIL PROTECTED]> wrote:
>
>> Dear Hans,
>>
>> it seems to me that \shortsetup ignores cd:command with
>> type="environment". Please see the next example:
>>
>> -
>> \usemodule[set-11] \loadsetups
>>
>> \starttext
>>
>> page (OK): \shortsetup{page}
>>
>> startframedtext (NOTHING): \shortsetup{startframedtext}
>>
>> framedtext (NOTHING): \shortsetup{framedtext}
>>
>> \stoptext
>> --
>>
>> Vit
>
> Not a problem with type="environment" but generated="yes".
>
> You should the the following code in x-set-11.tex from
>
> \defineXMLenvironmentsave [cd:command]
> [name=,type=,generated=,interactive=,variant=]
> {}
> {\doifelseXMLop{type}{environment}
>
> {\edef\currentSETUPname{start\getinterfacecomponent{string}{\XMLop{name
> {\edef\currentSETUPname{\getinterfacecomponent{string}{\XMLop{name%
>\doifsomething{\XMLop{variant}}
> {\edef\currentSETUPname{\currentSETUPname:\XMLop{variant}}}% like
> setupinterlinespace:1
>\doifXMLop{generated}{yes}
> {\edef\currentSETUPname{\currentSETUPname*}}%
>
> \doglobal\saveXMLdatainelement{stp:\currentSETUPname}{cd:command}{cd:command}%
>\expanded{\eachtexcommand[stp:x:\currentSETUPname]{\currentSETUPname}}%
>\expanded{\texcommand[stp:y:\currentSETUPname]{\currentSETUPname}}}
>
> to
>
> \defineXMLenvironmentsave [cd:command]
> [name=,type=,generated=,interactive=,variant=]
> {}
> {\doifelseXMLop{type}{environment}
>
> {\edef\currentSETUPname{start\getinterfacecomponent{string}{\XMLop{name
> {\edef\currentSETUPname{\getinterfacecomponent{string}{\XMLop{name%
>\doifsomething{\XMLop{variant}}
> {\edef\currentSETUPname{\currentSETUPname:\XMLop{variant}}}% like
> setupinterlinespace:1
>%\doifXMLop{generated}{yes}
>% {\edef\currentSETUPname{\currentSETUPname*}}%
Ohh, I see, thank you Wolfgang. I have overlooked the star. I think
everything is OK, only the star should be removed. The redefinition is
for expansion. Isn't it?
>
> \doglobal\saveXMLdatainelement{stp:\currentSETUPname}{cd:command}{cd:command}%
>\expanded{\eachtexcommand[stp:x:\currentSETUPname]{\currentSETUPname}}%
>\expanded{\texcommand[stp:y:\currentSETUPname]{\currentSETUPname}}}
>
> Look at the %-signs.
>
> I hope Hans will add something like \setupsetup[generated=yes|no] with
> generated=no as default
> to be backward compatible.
>
> Until Hans will include such a patched file you can use my attached one with
> \usemodule[t-set-11].
>
>
> For Hans! Shouldn't the "start" in the definition be a "\e!start"
I agree.
> \defineXMLenvironmentsave [cd:command]
> [name=,type=,generated=,interactive=,variant=]
> {}
> {\doifelseXMLop{type}{environment}
>
> {\edef\currentSETUPname{start\getinterfacecomponent{string}{\XMLop{name
> -
> \e!start
With current code the command name is typeset by uppercase, like
\startFRAMEDTEXT
Is this intended? In my opinion it confuses the user. I would redefine
\defineXMLenvironmentsave [cd:variable] [value=]
{{\expanded{\setupintfont{%
\getinterfacecomponent{variable}{\XMLop{value}\ignorespaces}
{\ignorespaces}
to
\defineXMLenvironmentsave [cd:variable] [value=]
{{\expanded{%
\getinterfacecomponent{variable}{\XMLop{value\ignorespaces}
{\ignorespaces}
Vit
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] calculations
Henning Hraban Ramm wrote:
> Am 2006-09-20 um 00:40 schrieb nico:
>
>> \figurewidth is not a dimension. I guess the following should work:
>>
>> \def\LPscale{.6315789} % downscale the image
>> \ifvmode
>> \getfiguredimensions[\bufferprefix
>> lilypond-\the\lily!figures.pdf][]%
>> \leavevmode%
>> \newdimen\FigWidth
>> \newdimen\FigWidthReal=\figurewidth
>> \FigWidth=\dimexpr(\LPscale\FigWidthReal)
>> \ifdim\FigWidth>\localhsize
>> \!!dimena=\localhsize
>> \advance\!!dimena by-\FigWidth
>> \noindent\hskip\!!dimena
>> \fi
>> \fi
>
> Thank you very much, that works indeed.
>
>> \externalfigure[\lily!img][scale=\dimexpr(1000\LPscale)]%
>
> But here \dimexpr is nonsense (should have seen that before).
> But "scale=1000\LPscale" just concatenates the two "strings", and TeX
> doesn't seem to reckognize a *
\def\LPscale{.6315789pt}
scale=\withoutpt\the\dimexpr\LPscale*1000\relax
Vit
> How can I multiply two values? Di I need some expansion magick or
> just something like "eval()"?
>
>
> Greetlings from Lake Constance!
> Hraban
> ---
> http://www.fiee.net/texnique/
> http://contextgarden.net
> http://www.cacert.org (I'm an assurer)
>
> ___
> ntg-context mailing list
> ntg-context@ntg.nl
> http://www.ntg.nl/mailman/listinfo/ntg-context
>
--
===
Ing. Vít Zýka, Ph.D. TYPOkvítek
database publishing databazove publikovani
data maintaining and typesetting in typographic quality
priprava dat a jejich sazba v typograficke kvalite
tel.: (+420) 777 198 189 www: http://typokvitek.com
===
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
[NTG-context] bug in beta: extra \else
Hi all,
there is some deep bug that was discovered translating Beginners manual.
Let take single chapter e.g. ma-cb-cz-alignments.tex
With today beta I got .log attached (error ! Extra \else)
This will appear in both modes screen and normal.
Interesting is that no error appears in context 2006-05-28.
In context 2006-09-10 this error appears only in normal mode. Screen
mode is OK.
Vit
P.S. Today's beta shows even more problems:
- inside typebuffer: only '\dochar {225}' instead of \'a in latin2
- some metapost graphics is wrong
But I suggest to solve them step by step.
This is pdfTeXk, Version 3.141592-1.40.0-beta-20060213 (Web2C 7.5.5)
(format=cont-en 2006.10.10) 10 OCT 2006 23:50
entering extended mode
\write18 enabled.
%&-line parsing enabled.
(c:/TeXLive2005/texmf-update/web2c/natural.tcx)
**ma-cb-cz-alignments.tex \emergencyend
(./ma-cb-cz-alignments.tex
ConTeXt ver: 2006.10.10 22:15 MK II fmt: 2006.10.10 int: english/english
language: language en is active
system : cont-new loaded
(c:/TeXLive2005/texmf-update/tex/context/base/cont-new.tex
systems : beware: some patches loaded from cont-new.tex
(c:/TeXLive2005/texmf-update/tex/context/base/cont-new.mkii))
system : cont-old loaded
(c:/TeXLive2005/texmf-update/tex/context/base/cont-old.tex
loading : Context Old Macros
)
system : cont-fil loaded
(c:/TeXLive2005/texmf-update/tex/context/base/cont-fil.tex
loading : Context File Synonyms
)
system : cont-sys loaded
(c:/TeXLive2005/texmf-update/tex/context/user/cont-sys.tex
(c:/TeXLive2005/texmf-update/tex/context/base/type-exa.tex)
(c:/TeXLive2005/texmf-update/tex/context/base/type-syn.tex)
(c:/TeXLive2005/texmf-update/tex/context/base/type-enc.tex)
(c:/TeXLive2005/texmf-update/tex/context/base/type-siz.tex)
(c:/TeXLive2005/texmf-update/tex/context/base/type-map.tex)
(c:/TeXLive2005/texmf-update/tex/context/base/type-spe.tex)
(c:/TeXLive2005/texmf-update/tex/context/base/type-akb.tex))
bodyfont: 12pt rm is loaded
language: patterns nl->texnansi:texnansi->1->2:3 nl->ec:ec->2->2:3 fr->
texnansi:texnansi->3->2:3 fr->ec:ec->4->2:3 de->texnansi:texnansi->5->2:3 de->e
c:ec->6->2:3 it->texnansi:texnansi->7->2:3 it->ec:ec->8->2:3 pt->texnansi:texna
nsi->9->2:3 pt->ec:ec->10->2:3 hr->ec:ec->11->2:3 pl->pl0:pl0->12->2:3 pl->ec:e
c->13->2:3 pl->qx:qx->14->2:3 cz->il2:il2->15->2:3 cz->ec:ec->16->2:3 sk->il2:i
l2->17->2:3 sk->ec:ec->18->2:3 sl->ec:ec->19->2:3 ru->t2a:t2a->21->2:3 en->ec:e
c->22->2:3 uk->ec:ec->23->2:3 us->ec:ec->24->2:3 agr->agr:agr->25->2:3 da->ec:e
c->26->2:3 sv->ec:ec->27->2:3 af->ec:ec->28->2:3 no->ec:ec->29->2:3 deo->ec:ec-
>30->2:3 es->ec:ec->31->2:3 ca->ec:ec->32->2:3 la->ec:ec->33->2:3 ro->ec:ec->34
->2:3 tr->ec:ec->35->2:3 fi->ec:ec->37->2:3 hu->ec:ec->38->2:3 loaded
specials: tex,postscript,rokicki loaded
\openout3 = `ma-cb-cz-alignments.tui'.
system : ma-cb-cz-alignments.top loaded
(./ma-cb-cz-alignments.top
specials: loading definition file tpd
(c:/TeXLive2005/texmf-update/tex/context/base/spec-tpd.tex
specials: loading definition file fdf
(c:/TeXLive2005/texmf-update/tex/context/base/spec-fdf.tex
(c:/TeXLive2005/texmf-update/tex/context/base/spec-fdf.mkii))
specials: fdf loaded
)
specials: fdf,tpd loaded
)
\openout0 = `ma-cb-cz-alignments-mpgraph.mp'.
\openout0 = `mpgraph.mp'.
systems : system commands are enabled
(./ma-cb-cz-alignments.tuo) (./ma-cb-cz-alignments.tuo)
(./ma-cb-cz-alignments.tuo) (./ma-cb-cz-alignments.tuo)
(./ma-cb-cz-alignments.tuo) (./ma-cb-cz-alignments.tuo)
(./ma-cb-cz-alignments.tuo) (./ma-cb-cz-alignments.tuo)
(./ma-cb-cz-alignments.tuo) (./ma-cb-cz-alignments.tuo)
(c:/TeXLive2005/texmf-update/tex/context/base/sort-def.tex)
(c:/TeXLive2005/texmf-update/tex/context/base/sort-lan.tex)
(./ma-cb-cz-alignments.tuo) (./ma-cb-cz-alignments.tuo)
systems : begin file ma-cb-cz-alignments at line 3
systems : begin file ma-cb at line 4
systems : end file ma-cb at line 4
systems : begin file ma-cb-env-cz at line 7
(./ma-cb-env-cz.tex (../generic/ma-cb.tex
systems : begin file ../generic/ma-cb-abbreviations at line 11
(./../generic/ma-cb-abbreviations.tex
check : logo CONTEXT replaces a macro, use CAPITALS!
check : logo PDFTEX replaces a macro, use CAPITALS!
check : logo PICTEX replaces a macro, use CAPITALS!
check : logo TABLE replaces a macro, use CAPITALS!
check : logo TEX replaces a macro, use CAPITALS!
check : logo METAPOST replaces a macro, use CAPITALS!
check : logo METAFUN replaces a macro, use CAPITALS!
)
systems : end file ../generic/ma-cb-abbreviations at line 11
systems : begin file ../generic/ma-cb-graphics at line 12
(./../generic/ma-cb-graphics.tex)
systems : end file ../generic/ma-cb-graphics at line 12
systems : begin file ../generic/ma-cb-style at line 13
(./../ge
Re: [NTG-context] bug in beta: extra \else
Hans Hagen wrote:
> Vit Zyka wrote:
>> Hans Hagen wrote:
>>> Wolfgang Schuster wrote:
>>>> On Fri, 13 Oct 2006 19:16:58 -0400 (EDT)
>>>> Aditya Mahajan <[EMAIL PROTECTED]> wrote:
>>>>
>>>>
>>>>> On Fri, 13 Oct 2006, Vit Zyka wrote:
>>>>>
>>>>>
>>>>>> Hans Hagen wrote:
>>>>>>
>>>>>>> Vit Zyka wrote:
>>>>>>>
>>>>>>>> Hans Hagen wrote:
>>>>>>>>
>>>>>>>>> Vit Zyka wrote:
>>>>>>>>>
>>>>>>>>>> Hi all,
>>>>>>>>>>
>>>>>>>>>> there is some deep bug that was discovered translating
>>>>>>>>>> Beginners manual. Let take single chapter e.g.
>>>>>>>>>> ma-cb-cz-alignments.tex
>>>>>>>>>>
>>>>>>>>>> With today beta I got .log attached (error ! Extra \else)
>>>>>>>>>> This will appear in both modes screen and normal.
>>>>>>>>>>
>>>>>>>>>> Interesting is that no error appears in context 2006-05-28.
>>>>>>>>>>
>>>>>>>>> quite some code is being rewritten / adapted to context mkiv so
>>>>>>>>> there could be low level differences
>>>>>>>>>
>>>>>>>>> can you make a small example, since this else problem can come
>>>>>>>>> from other places than reported
>>>>>>>>>
>>>>>>>> There are demonstrative files. Please, run
>>>>>>>> texmfstart texexec --pdf ma-cb-cz-test.tex
>>>>>>>> and
>>>>>>>> texmfstart texexec --pdf --mode=screen ma-cb-cz-test.tex
>>>>>>>>
>>>>>>> this file: ma-cb-env-cz.tex refers to itself and probably should
>>>>>>> be :
>>>>>>> \startenvironment ma-cb-env-cz
>>>>>>>
>>>>>>> \environment ma-cb.tex
>>>>>>>
>>>>>>> \mainlanguage[cz]
>>>>>>> \language[en]
>>>>>>> \enableregime[latin2]
>>>>>>>
>>>>>>> \stopenvironment
>>>>>>>
>>>>>> Sorry, my fault but it does not solve the problem. I obtain the
>>>>>> same error with fresh context and corrected version of this file:
>>>>>>
>>>>>> -
>>>>>> \startenvironment ma-cb-env-cz
>>>>>>
>>>>>> \mainlanguage[cz]
>>>>>> \language[en]
>>>>>> \enableregime[latin2]
>>>>>>
>>>>>> \stopenvironment
>>>>>> -
>>>>>>
>>>>> There is something wrong with ma-cb environment files. The file
>>>>> ma-cb-en does not compile. I get an error
>>>>>
>>>>> ! Undefined control sequence.
>>>>> \@@olbackground ->\StatusAchtergrond
>>>>>
>>>>> \doifvaluesomething ...inga {\csname #1\endcsname
>>>>>}\ifx \!!stringa
>>>>> \empty \e...
>>>>>
>>>>> \stoplocalframed ...ing {\@@framed \c!background }
>>>>>\dobackedbox
>>>>> \handleframed...
>>>>>
>>>>> \PlaatschapterStatus ... [\v!chapter \v!number ]}}
>>>>> \vskip 0pt plus
>>>>> \scratchc...
>>>>> \PlaatschapterStatus
>>>>> {}{}{}
>>>>> \firstoftwoarguments #1#2->#1
>>>>>
>>>>> ...
>>>>> l.19 \Introduction {Introduction}
>>>>>
>>>>>
>>>>> I tried making minimal example of the file that you posted, but
>>>>> always get the same error. I am pretty certain that ma-cb-en.tex
>>>>> used to compile in the past.
>>>>>
>>>>> Aditya
>>>>>
>&g
Re: [NTG-context] bug in beta: extra \else
Hans Hagen wrote:
> Aditya Mahajan wrote:
>> On Mon, 16 Oct 2006, Aditya Mahajan wrote:
>>
>>> On Sun, 15 Oct 2006, Vit Zyka wrote:
>>>> Great, thank you Hans!
>>>>
>>>> Let us process to teh next two problems also visible in the test file.
>>>>
>>>> 1. [snip]
>>>> 2. Accented characters inside \typebuffer are type set as
>>>> \dochar {225}
>>> This seems to be a bug. In utf-8 encoding, if an accented character is
>>> the first character of a buffer, it gets typed correctly. All other
>>> accented charaters come out as \dochar {225}. \getbuffer works fine.
>> I forgot to attach the test file. I am attaching it, hoping that the
>> encoding will come out correctly.
>>
>>> Can TeX choose the input encoding while writing files? If not, there
>>> may be really no robust way to solve this problem.
>>>
>>> Aditya
>
> in core-buf we need to treat the upper half of the vector:
>
>\recatcodeuppercharacterstrue % <---
>\setcatcodetable\vrbcatcodes
>
> in startbuffer
It also works well. Thank you
Vit
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] index bug ? [urgent]
Willi Egger wrote:
> Hi Steffen,
>
> After adding
> \enableregime[windows]
> \mainlanguage[de]
>
> I get as expected an index. The only thing which I do not understand
> quite well, is, that the entry for
> \index{Gesetzesvorbehalt&– Arbeitsanweisungen durch Bundesminister}
> results in the references 2,1,2, where I would expect only 1,2.
Guessing: is not the index entry inside the \chapter title which also
goes to content (or another list) that is on a separate page numbering?
Vit
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] Shapes spanning multiple grid cells in flowchart
Martijn Martijn wrote: > Hello, > > I've just started to use Context because of its great flowcharting > module. However, I'd like to use shapes that span multiple grid cells. > This is what I would like to accomplish: > > |---||---||---| > | |<-->| box 2 |<-->| box 3 | > | ||---||---| > | box 1 | > | ||---||---| > | |<-->| box 4 |<-->| box 5 | > | ||---||---| > | | > | | > | | > |---| > > > I could not find a way to do this in the manual. Every shape in the > manual has the same size. Thanks for the help! Current version of flowchart does not support this feature. Cells are arranged in a regular grid without spanning. Vit > > Martijn ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
[NTG-context] deep (?) error when page break occures inside of startlines together with MPgraphics
Hello Hans & all deep macros diggers,
making final editting of czech translation of beginners manual I have
discovered a next error. It appears when page break occures inside of
startlines environment together with MPgraphics. Minimal example is
attached. Any idea, please?
Thanks
Vit
--
\def\MPclipFourR#1#2#3%
{\startreusableMPgraphic{clip:fourR:#1#2#3}{}
draw fullcircle;
\stopreusableMPgraphic
\reuseMPgraphic{clip:fourR:#1#2#3}{}}
\defineoverlay
[StatusAchtergrondR]
[\MPclipFourR{\overlaywidth}{\overlayheight}{5pt}]
\setupfootertexts
[margin]
[][\PlaatschapterStatus]
\unexpanded\def\PlaatschapterStatus
{\framed[background=StatusAchtergrondR]{A}}
\starttext
\startlines
Foekepotterij, foekepotterij,
Geef mij een centje dan ga'k voorbij.
Geef mij een alfje dan blijf ik staan,
'k Zal nog liever naar m'n arrenmoeder gaan.
Hier woont zo'n rieke man, die zo vulle g\egrave ven kan.
G\egrave f wat, old wat, g\egrave f die arme stumpers wat,
'k Eb zo lange met de foekepot elopen.
'k Eb gien geld om brood te kopen.
Foekepotterij, foekepotterij,
Geef mij een centje dan ga'k voorbij.
Foekepotterij, foekepotterij,
Geef mij een centje dan ga'k voorbij.
Geef mij een alfje dan blijf ik staan,
'k Zal nog liever naar m'n arrenmoeder gaan.
Hier woont zo'n rieke man, die zo vulle g\egrave ven kan.
G\egrave f wat, old wat, g\egrave f die arme stumpers wat,
'k Eb zo lange met de foekepot elopen.
'k Eb gien geld om brood te kopen.
Foekepotterij, foekepotterij,
Geef mij een centje dan ga'k voorbij.
Foekepotterij, foekepotterij,
Geef mij een centje dan ga'k voorbij.
Geef mij een alfje dan blijf ik staan,
'k Zal nog liever naar m'n arrenmoeder gaan.
Hier woont zo'n rieke man, die zo vulle g\egrave ven kan.
G\egrave f wat, old wat, g\egrave f die arme stumpers wat,
'k Eb zo lange met de foekepot elopen.
'k Eb gien geld om brood te kopen.
Foekepotterij, foekepotterij,
Geef mij een centje dan ga'k voorbij.
Foekepotterij, foekepotterij,
Geef mij een centje dan ga'k voorbij.
Geef mij een alfje dan blijf ik staan,
'k Zal nog liever naar m'n arrenmoeder gaan.
Hier woont zo'n rieke man, die zo vulle g\egrave ven kan.
G\egrave f wat, old wat, g\egrave f die arme stumpers wat,
'k Eb zo lange met de foekepot elopen.
'k Eb gien geld om brood te kopen.
Foekepotterij, foekepotterij,
Geef mij een centje dan ga'k voorbij.
Foekepotterij, foekepotterij,
Geef mij een centje dan ga'k voorbij.
Geef mij een alfje dan blijf ik staan,
'k Zal nog liever naar m'n arrenmoeder gaan.
Hier woont zo'n rieke man, die zo vulle g\egrave ven kan.
G\egrave f wat, old wat, g\egrave f die arme stumpers wat,
'k Eb zo lange met de foekepot elopen.
'k Eb gien geld om brood te kopen.
Foekepotterij, foekepotterij,
Geef mij een centje dan ga'k voorbij.
Foekepotterij, foekepotterij,
Geef mij een centje dan ga'k voorbij.
Geef mij een alfje dan blijf ik staan,
'k Zal nog liever naar m'n arrenmoeder gaan.
Hier woont zo'n rieke man, die zo vulle g\egrave ven kan.
G\egrave f wat, old wat, g\egrave f die arme stumpers wat,
'k Eb zo lange met de foekepot elopen.
'k Eb gien geld om brood te kopen.
Foekepotterij, foekepotterij,
Geef mij een centje dan ga'k voorbij.
\stoplines
\stoptext
-
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] deep (?) error when page break occures inside of startlines together with MPgraphics
Taco Hoekwater wrote: > > Vit Zyka wrote: >> Hello Hans & all deep macros diggers, >> >> making final editting of czech translation of beginners manual I have >> discovered a next error. It appears when page break occures inside of >> startlines environment together with MPgraphics. Minimal example is >> attached. Any idea, please? > > > You mean this error? > > (/home/taco/texmf/tex/context/base/pdfr-ec.tex) > ! TeX capacity exceeded, sorry [parameter stack size=6000]. > \longMPflushN #1#2\par -> > \ifx #1\relax \else \nowriteMPgraphicline Exactly. Some infinite recurse. Vit ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] deep (?) error when page break occures inside of startlines together with MPgraphics
Hans Hagen wrote: > Vit Zyka wrote: >> Taco Hoekwater wrote: >> >>> Vit Zyka wrote: >>> >>>> Hello Hans & all deep macros diggers, >>>> >>>> making final editting of czech translation of beginners manual I have >>>> discovered a next error. It appears when page break occures inside of >>>> startlines environment together with MPgraphics. Minimal example is >>>> attached. Any idea, please? >>>> >>> You mean this error? >>> >>> (/home/taco/texmf/tex/context/base/pdfr-ec.tex) >>> ! TeX capacity exceeded, sorry [parameter stack size=6000]. >>> \longMPflushN #1#2\par -> >>> \ifx #1\relax \else \nowriteMPgraphicline >>> >> Exactly. Some infinite recurse. >> > \appendtoks \obeyMPlines \to \everyMPgraphic How simple, works as charm! Thank you Hans. Vit ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
