[AFMUG] contract verbage for site lease that covers all the bands

I am signing a site lease agreement but in this case, I want to make sure that nobody else uses any spectrum, aka, all of it, that might interfere. Does anyone have an addendum for that? Rory Conaway * Triad Wireless * CEO 4226 S. 37th Street * Phoenix * AZ 85040 602-426-0542

Re: [AFMUG] Fwd: Cambium Networks Inc. FCC ID Application for New Equipment

Uhm I think the Force 190 is showing up at distributors at this point? It's cheaper and 3db less than the Force 200. A good gap between 180 and 190, but I still suggest Force 200. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Wed, Aug 30,

Re: [AFMUG] Cost effective battery charging and monitoring device

OK so 50 amps full scale, .1 volt input. .002 ohms. 2 feet of #10 wire is your shunt. You can even coil it up and make it nice and small. Put it on the ground side of your battery. Then the telemetry measures from true ground to the other side of the shunt. I have done wire shunts many

Re: [AFMUG] Fwd: Cambium Networks Inc. FCC ID Application for New Equipment

I really don't know where this fits in. Who wants to keep three radios on the truck? If they could have made the same design for say a 27db antenna, that would be something we'd use. On Wed, Aug 30, 2017 at 1:53 PM, Mathew Howard wrote: > No, we'll probably keep using the

Re: [AFMUG] AP for VoIP

Yes, it is hard to please everyone !.. FYI.. in the small business markets, Panasonic is very well known for producing excellent phones and phone systems. But .. to each their own :) Faisal Imtiaz Snappy Internet & Telecom 7266 SW 48 Street Miami, FL 33155 Tel: 305 663 5518 x 232

Re: [AFMUG] contract verbage for site lease that covers all thebands

Just pee on it. Assert your dominance. On Aug 30, 2017 12:10 PM, "Rory Conaway" wrote: > I suspect some others are going to want this spot when they find out about > it. Just making sure it’s not an issue. > > > > *From:* Af [mailto:af-boun...@afmug.com] *On Behalf Of

Re: [AFMUG] Cost effective battery charging and monitoring device

Would these work on a SiteMonitor? They output 1-5V DC based on current flowing through. https://flexscada.com/product/hall-effect-current-sensor-ac-75a-dc-100a/ Jesse

Re: [AFMUG] contract verbage for site lease that covers all thebands

Do you want to play Words with Friends to keep from falling asleep? Rory From: Af [mailto:af-boun...@afmug.com] On Behalf Of Josh Reynolds Sent: Wednesday, August 30, 2017 10:33 AM To: af@afmug.com Subject: Re: [AFMUG] contract verbage for site lease that covers all thebands Well, right now I'm

Re: [AFMUG] Fwd: Cambium Networks Inc. FCC ID Application for New Equipment

WE will try to standardize on the Force 190, if we need more, then a 200 or Conn. With 2ft dish From: Af > on behalf of Mathew Howard > Reply-To: "af@afmug.com"

Re: [AFMUG] contract verbage for site lease that covers all thebands

Well, right now I'm in an all day meeting with a vendor about a federal product rollout. You guess how that's going. On Aug 30, 2017 12:26 PM, "Rory Conaway" wrote: LOL. Josh, I wonder what it would be like to live in your world. Rory *From:* Af

Re: [AFMUG] Fwd: Cambium Networks Inc. FCC ID Application for New Equipment

No, we'll probably keep using the 180 for really short links, but we really don't use that many as it is. I'm not really sure how often we'll end up using the 190, but I'm thinking it will be something like if we get less than -60 use a Force 200, otherwise, use a 190 or a 180. On Wed, Aug 30,

Re: [AFMUG] contract verbage for site lease that covers all the bands

On 8/30/17 06:18, Chuck McCown wrote: lessor grants exclusive use of (frequency ranges) 1MHz to 1THz

Re: [AFMUG] Cost effective battery charging and monitoring device

Yeah, about that. I wouldn't use those on 12VDC systems. Too much current. I've burned up a couple of the 10A shunts on Traco BCMUs that were running around 200W load on battery. 200/13 = 15 amps. Ungood. One site at about 225W, first time it went to battery, the shunt went kaput after 10-15

Re: [AFMUG] Cost effective battery charging and monitoring device

What is your max charging and discharging current? That is the first thing. Second thing is what is the voltage range of the device you are using to measure the current. For example, if you never expect more than 50 amps and your telemetry will measure 0-1 volt on the analog input, then

Re: [AFMUG] Cost effective battery charging and monitoring device

No, the SiteMonitor shunt input is ±100mV nominal. On 8/30/2017 12:42 PM, Jesse DuPont wrote: Would these work on a SiteMonitor? They output 1-5V DC based on current flowing through. https://flexscada.com/product/hall-effect-current-sensor-ac-75a-dc-100a/ *_Jesse DuPont_* Network Architect

Re: [AFMUG] Cost effective battery charging and monitoring device

So, R1 would be X Ohms and R2 would be X*.02 Ohms? Jesse DuPont Network Architect email: jesse.dup...@celeritycorp.net

Re: [AFMUG] Cost effective battery charging and monitoring device

it puts out so many millivolts depending on how many amps are moving through it, so with a volt meter you can monitor what your load is. -- Original Message -- From: "Steve Jones" To: "af@afmug.com" Sent: 8/30/2017 11:36:38 AM Subject: Re:

Re: [AFMUG] contract verbage for site lease that covers all the bands

What, what about my areas 800 miles off the coast, 400' under water? I should expand that to 1Hz just in case. Thanks. Rory -Original Message- From: Af [mailto:af-boun...@afmug.com] On Behalf Of Seth Mattinen Sent: Wednesday, August 30, 2017 9:12 AM To: af@afmug.com Subject: Re:

Re: [AFMUG] Fate of the CBRS band

On 8/29/17 10:52, Matt Hoppes wrote: What am I reading here that should be dooms day?  10MHz channels, you can only own 2 or 3.  So they want to CA... don't we?  What's the point?  We still keep the existing GAA spectrum regardless. The CTIA is pushing to change that and make the whole

Re: [AFMUG] Fwd: Cambium Networks Inc. FCC ID Application for New Equipment

Will ship from Asia around Oct. 1st. Jeff Broadwick ConVergence Technologies, Inc. 312-205-2519 Office 574-220-7826 Cell jbroadw...@converge-tech.com > On Aug 30, 2017, at 1:05 PM, Mathew Howard wrote: > > Yup... it's existence has been public for awhile... and this

Re: [AFMUG] AP for VoIP

Lol :) On Aug 30, 2017 12:05 PM, "Lewis Bergman" wrote: > If you use Panasonic your not picky in quality anyway. > > On Tue, Aug 29, 2017, 2:22 PM Faisal Imtiaz > wrote: > >> Never say Never ! >> >> >>

Re: [AFMUG] Cost effective battery charging and monitoring device

But you can use a voltage divider to convert the 0-5 volt to 0-.1 volt. Two resistors. From: George Skorup Sent: Wednesday, August 30, 2017 11:48 AM To: af@afmug.com Subject: Re: [AFMUG] Cost effective battery charging and monitoring device No, the SiteMonitor shunt input is ±100mV

Re: [AFMUG] contract verbage for site lease that covers all thebands

I guess I have been lucky...have always figured a way to overcome interference issues with out involving offender or anyone else. Jaime Solorza On Aug 30, 2017 10:48 AM, "Steve Jones" wrote: > remediation terms wouldn't be a bad thing to have. ie "if some MFer >

Re: [AFMUG] Cost effective battery charging and monitoring device

V out = Vin x [R1/(R1+R2)] So you are giving it 5 volts full scale and you need .1 volt to represent full scale. V out/ V in = .1/5 or .02 Pick a R1. Normally telemetry inputs are pretty high impedance like 100K or 1M so the divider resistance can use 1K as one of the resistances. So if

Re: [AFMUG] contract verbage for site lease that covers all thebands

remediation terms wouldn't be a bad thing to have. ie "if some MFer collocates, tenant is absolved of all liability for .40 remediation of all offending equipment" and as I recently found out, make sure the property is clearly defined, if there are multiple structures on the property, make sure

Re: [AFMUG] contract verbage for site lease that covers all thebands

LOL. Josh, I wonder what it would be like to live in your world. Rory From: Af [mailto:af-boun...@afmug.com] On Behalf Of Josh Reynolds Sent: Wednesday, August 30, 2017 10:12 AM To: af@afmug.com Subject: Re: [AFMUG] contract verbage for site lease that covers all thebands Just pee on it.

[AFMUG] open source netflow tool?

I’m looking for an open source way to analyze netflow and traffic flow (Mikrotik’s version), what are you guys using/happy with? Super nice if it provided historical information via RRD/mrtg so I can keep track of issues.

Re: [AFMUG] Cost effective battery charging and monitoring device

Forrest, quit working and come out and play with us From: Chuck McCown Sent: Wednesday, August 30, 2017 11:49 AM To: af@afmug.com Subject: Re: [AFMUG] Cost effective battery charging and monitoring device But you can use a voltage divider to convert the 0-5 volt to 0-.1 volt. Two

Re: [AFMUG] Cost effective battery charging and monitoring device

Look at the maximum current that will pass through the shunt, and then buy one just larger than that. For instance, if your charger can charge at 15A you need a 20A shunt. On Wed, Aug 30, 2017 at 11:28 AM, Ryan Ray wrote: > How would you properly spec out a shunt given a

Re: [AFMUG] DC Generators?

Someone posted this a while ago: http://www.ebay.com/itm/New-2-IN-1-Gas-Gasoline-Generator-3000W-DC-OUTPUT-24V-for-pure-power-inverter-/252041630986?hash=item3aaeda150a I think they make them in 12,24 and 48V. On Wed, Aug 30, 2017 at 2:41 PM, Gino A. Villarini wrote: >

Re: [AFMUG] Fwd: Cambium Networks Inc. FCC ID Application for New Equipment

I'm sorry...they are supposed to ship soon. Should be in the US around the beginning of October. Jeff Broadwick ConVergence Technologies, Inc. 312-205-2519 Office 574-220-7826 Cell jbroadw...@converge-tech.com > On Aug 30, 2017, at 1:08 PM, Jeff Broadwick - Lists wrote: > >

Re: [AFMUG] Cost effective battery charging and monitoring device

The challenge with higher current shunts is how much power is dissipated by the shunt. A 20A shunt at maximum will dissipate (waste) around 2 watts. I know this doesn't sound like a lot, but when you're talking a tiny device on a circuit board, it is. I've recently redesigned the shunts and

Re: [AFMUG] Cost effective battery charging and monitoring device

But what if working is putting rackinjectors in boxes so I can actually get back to engineering solutions for this type of stuff? On Wed, Aug 30, 2017 at 11:51 AM, Chuck McCown wrote: > Forrest, quit working and come out and play with us > > *From:* Chuck McCown > *Sent:*

Re: [AFMUG] DC Generators?

Aren't all "inverter generators" technically DC generators in the first place? They have to run whatever they produce through an inverter in order to produce 110, or 220 AC. I would poke into one to see what feeds into the inverter in the first place. bp On

[AFMUG] DC Generators?

Anyone using DC Generators for charging Batts ? Really hard to find Gino A. Villarini President Metro Office Park #18 Suite 304 Guaynabo, Puerto Rico 00968 [cid:aeronet-logo_310cfc3e-6691-4f69-bd49-b37b834b9238.png]

Re: [AFMUG] Cost effective battery charging and monitoring device

Most of these should work, as someone has pointed out, you should be able to use a voltage divider to get it down to the range... If you put a 204 ohm resistor across the shunt input and 10K ohms in series with the shunt that should scale 5V down to 0.1V. If you need other ranges, see

Re: [AFMUG] DC Generators?

all ours have dc outputs on them, I don't know how clean it is though, weve never used it. On Wed, Aug 30, 2017 at 1:41 PM, Gino A. Villarini wrote: > Anyone using DC Generators for charging Batts ? Really hard to find > > > > *Gino A. Villarini* > President > Metro Office

Re: [AFMUG] Cost effective battery charging and monitoring device

Thanks Chuck! Very helpful. On Wed, Aug 30, 2017 at 11:04 AM, Chuck McCown wrote: > V out = Vin x [R1/(R1+R2)] > > So you are giving it 5 volts full scale and you need .1 volt to represent > full scale. > > V out/ V in = .1/5 or .02 > > Pick a R1. Normally telemetry inputs are

Re: [AFMUG] AP for VoIP

And then there is Panasoanic From: Faisal Imtiaz Sent: Wednesday, August 30, 2017 12:14 PM To: af@afmug.com Subject: Re: [AFMUG] AP for VoIP Yes, it is hard to please everyone !.. FYI.. in the small business markets, Panasonic is very well known for producing excellent phones and phone

Re: [AFMUG] DC Generators?

Pretty easy to make DC out of AC. A true DC generator probably has brushes and a commutator. Not something you really want. I imagine anything you are likely to find is probably AC that is rectified. From: can...@believewireless.net Sent: Wednesday, August 30, 2017 12:56 PM To:

Re: [AFMUG] OT Home Battery Array, Generator and Solar Readiness

Tesla Powerwall looks to be 14kWh, so you'd be looking at about $2100 worth of batteries to get the equivalent. I don't see anything on Tesla's website about what size inverter it comes with, but from what I'm seeing on Google, it looks to only be 5kW. You'd also have to come up with some kind of

[AFMUG] how would you bill this? Voip question

I've received an inquiry to setup an automated attendant for a growing non-profit in our area. They take care of the vets. There basically is no office, just a network of volunteers. I may not charge them anything but assuming this were a for-profit of a similar type, how would you bill this?

Re: [AFMUG] Cost effective battery charging and monitoring device

Well, it certainly can't be less fun than I've been having over the last few months. On Wed, Aug 30, 2017 at 2:44 PM, Chuck McCown wrote: > What is the fun in that... > > *From:* Forrest Christian (List Account) > *Sent:* Wednesday, August 30, 2017 2:25 PM > *To:* af >

Re: [AFMUG] OT Home Battery Array, Generator and Solar Readiness

Ok. Is this easier to do with a APC Symmetra PC Power Array system? I found one for a good price for pickup 16Kva for $1800. -Original Message- From: Af [mailto:af-boun...@afmug.com] On Behalf Of Chuck McCown Sent: Wednesday, August 30, 2017 3:11 PM To: af@afmug.com Subject: Re: [AFMUG]

[AFMUG] Some kids are alright

My son posted this. https://youtu.be/KiOm_63djyM Apparently he just got the new engine put in my dump truck for me. What a nice boy

Re: [AFMUG] OT Hello Kopacetic Kool Kats

Yes sir...and my niece gave birth to Janette Lee an hour earlier...my brothers 3rd grandkid... hopefully one of mine will wipe spittle from my mouth when I am much older and out of it. Jaime Solorza On Aug 30, 2017 4:54 PM, "Steve Jones" wrote: hot dog man! On Wed,

Re: [AFMUG] Some kids are alright

Some kids grow up to be someone you want to burn, some kids grow to be someone who loves to learn ..mom loves both of them, you see blood is thicker than mud...it's a family affair... Apologies to Sly Stone Jaime Solorza On Aug 30, 2017 4:26 PM, "Chuck McCown" wrote: > My

Re: [AFMUG] how would you bill this? Voip question

we charge a one time setup fee per line, this is like 20 minutes of time and two voice recordings, then whatever the (in our case) reseller rate is per line monthly On Wed, Aug 30, 2017 at 7:46 PM, Josh Reynolds wrote: > 1/2 hr labor rate - VoIP customization and

Re: [AFMUG] OT Home Battery Array, Generator and Solar Readiness

1 watt of lead battery does not equal 1 watt of lithium ion. With lead acid you can only take them to about 40-50% depth of discharge but with the lithium ion you can get like 80-90% depth of discharge. Also the number of discharge is only like 1000-3000 cycles where with lithium it can be as high

Re: [AFMUG] Cost effective battery charging and monitoring device

What is the fun in that... From: Forrest Christian (List Account) Sent: Wednesday, August 30, 2017 2:25 PM To: af Subject: Re: [AFMUG] Cost effective battery charging and monitoring device But what if working is putting rackinjectors in boxes so I can actually get back to engineering

Re: [AFMUG] Cost effective battery charging and monitoring device

That product listed below shows it for use in scada operations so it must have overcome the cal and drift issues. It is claiming a tenth of an amp accuracy. From: Forrest Christian (List Account) Sent: Wednesday, August 30, 2017 2:24 PM To: af Subject: Re: [AFMUG] Cost effective battery

Re: [AFMUG] OT Home Battery Array, Generator and Solar Readiness

Ask the wife why shes looking at the roof in the first place, theres nothing to vacuum up there, there is no stove up there, it would be dangerous washing dishes up there, and unless she wants a clothesline up there there is no laundry up there. Somebody on the list will probably let you sleep on

Re: [AFMUG] OT Home Battery Array, Generator and Solar Readiness

How many kWh is that tesla wall of batts or whatever it is called? BTW, you have until November to file a net metering application with RMP in Utah to get grandfathered into the better deal. -Original Message- From: Sterling Jacobson Sent: Wednesday, August 30, 2017 3:14 PM To:

Re: [AFMUG] DC Generators?

I believe the Yamaha EF1000i and 2000i are dual rectifier alternators. On 8/30/2017 3:44 PM, Chuck McCown wrote: I think they are alternators, that rectify the output then feed it into an inverter.� So AC-DC-AC True DC generators are not seen much. Alternators have slip rings which last far

Re: [AFMUG] OT Hello Kopacetic Kool Kats

Congrats grandpa! From: Jaime Solorza Sent: Wednesday, August 30, 2017 4:15 PM To: Animal Farm Subject: [AFMUG] OT Hello Kopacetic Kool Kats My name is Robert James Mowad Solorza. I am number 15 Jaime Solorza

Re: [AFMUG] contract verbage for site lease that covers all thebands

DC to cosmic rays would be a bit more inclusive -Original Message- From: Seth Mattinen Sent: Wednesday, August 30, 2017 10:12 AM To: af@afmug.com Subject: Re: [AFMUG] contract verbage for site lease that covers all thebands On 8/30/17 06:18, Chuck McCown wrote: lessor grants

Re: [AFMUG] Fwd: Cambium Networks Inc. FCC ID Application for New Equipment

Yup... it's existence has been public for awhile... and this reminds me, I need to order some. The neat thing about the Force 190 is that it comes in the same size box as the Force 180. I still expect to use Force 200s most of the time, but there are a lot of cases where the 180 isn't quite

Re: [AFMUG] AP for VoIP

If you use Panasonic your not picky in quality anyway. On Tue, Aug 29, 2017, 2:22 PM Faisal Imtiaz wrote: > Never say Never ! > > > https://www.voipsupply.com/panasonic-kx-tpa65-desktop-dect-phone > > > :) > > Faisal Imtiaz > Snappy Internet & Telecom > 7266 SW 48

Re: [AFMUG] contract verbage for site lease that covers all thebands

I suspect some others are going to want this spot when they find out about it. Just making sure it’s not an issue. From: Af [mailto:af-boun...@afmug.com] On Behalf Of Jaime Solorza Sent: Wednesday, August 30, 2017 10:03 AM To: Animal Farm Subject: Re: [AFMUG] contract verbage for site lease

Re: [AFMUG] Cost effective battery charging and monitoring device

How would you properly spec out a shunt given a certain number of batteries? On Wed, Aug 30, 2017 at 8:39 AM, Adam Moffett wrote: > it puts out so many millivolts depending on how many amps are moving > through it, so with a volt meter you can monitor what your load is. > >

Re: [AFMUG] Cost effective battery charging and monitoring device

This assumes you can go positive or negative with the telemetry input. If not, then you have to shunt the charger and the load separately. From: Chuck McCown Sent: Wednesday, August 30, 2017 11:38 AM To: af@afmug.com Subject: Re: [AFMUG] Cost effective battery charging and monitoring

Re: [AFMUG] Fwd: Cambium Networks Inc. FCC ID Application for New Equipment

Are you dropping 180 for the 190? In what situation would you use a 190 (previously 180) instead of a 200? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Wed, Aug 30, 2017 at 1:05 PM, Mathew Howard wrote: > Yup... it's

Re: [AFMUG] Cost effective battery charging and monitoring device

They sure look like they would be great. Forrest needs to answer for certain but cannot think of any reason why they would not be ideal. From: Jesse DuPont Sent: Wednesday, August 30, 2017 11:42 AM To: Animal Farm Subject: Re: [AFMUG] Cost effective battery charging and monitoring device

Re: [AFMUG] contract verbage for site lease that covers all thebands

Isn't that what we're doing? :) On Aug 30, 2017 12:47 PM, "Rory Conaway" wrote: > Do you want to play Words with Friends to keep from falling asleep? > > > > Rory > > > > *From:* Af [mailto:af-boun...@afmug.com] *On Behalf Of *Josh Reynolds > *Sent:* Wednesday, August

Re: [AFMUG] DC Generators?

I think they are alternators, that rectify the output then feed it into an inverter. So AC-DC-AC True DC generators are not seen much. Alternators have slip rings which last far longer than commutators. From: Bill Prince Sent: Wednesday, August 30, 2017 2:35 PM To: af@afmug.com Subject:

Re: [AFMUG] Magnets on a warm summer day

I have not yet added up all the nuts bolts and washers but it will come in at a list – retail price of between $200 and $225 MINUS MAGNETS You just order it with the pull you need and I will add the magnets. A 250 lb magnet costs me about $30 so you would need three of them. I will not mark up

[AFMUG] OT Home Battery Array, Generator and Solar Readiness

Looks like it’s about $6k plus installation for a TESLA Wall battery. Couldn’t I just get about 10 $165 batteries and put them in an array in my utility room? I’ve got a Generac transfer switch that I haven’t hooked up. Ideally I would like to have ‘clean’ power through some sort of whole home

Re: [AFMUG] OT Home Battery Array, Generator and Solar Readiness

How many kwh is that? Batts can be had for 15 cents per watt hour - or - $150 per kWh. Inverters come in at 15-30 cents per watt. Lets say you want a 20 kWh battery, DIY it should cost $3K for the batts. 10 kW will run most homes unless you have all the AC and clothes dryers running at the

Re: [AFMUG] Cost effective battery charging and monitoring device

I would be very happy to have a 20A 100mv shunt in your DIN package. The Traco BCMU360 is only rated for 240W continuous. 240/12 = 20A. I will typically only load them up with no more than 220-225W, since I'm using Mean Well SDR-240-48's, so I still need 10-15 watts for battery charging. If I

Re: [AFMUG] OT Hello Kopacetic Kool Kats

hot dog man! On Wed, Aug 30, 2017 at 5:25 PM, Chuck McCown wrote: > Congrats grandpa! > > *From:* Jaime Solorza > *Sent:* Wednesday, August 30, 2017 4:15 PM > *To:* Animal Farm > *Subject:* [AFMUG] OT Hello Kopacetic Kool Kats > > My name is Robert James Mowad Solorza. I am

[AFMUG] Fwd: Cambium Networks Inc. FCC ID Application for New Equipment

-- Forwarded message -- From: "FCC ID Alert" Date: Aug 30, 2017 7:30 AM Subject: Cambium Networks Inc. FCC ID Application for New Equipment To: "FCC ID Alert" Cc: A new FCC ID application has been submitted by Cambium Networks Inc. for New

Re: [AFMUG] contract verbage for site lease that covers all the bands

lessor grants exclusive use of (frequency ranges) From: Rory Conaway Sent: Wednesday, August 30, 2017 12:30 AM To: af@afmug.com Subject: [AFMUG] contract verbage for site lease that covers all the bands I am signing a site lease agreement but in this case, I want to make sure that nobody

[AFMUG] Netonix + GIGEPOE ?

Hey Everyone / Chuck, I have a Netonix switch and want to verify that the GIGEPOE can be used to extract power from it. Netonix Specs say: 48VH 1.5A pins 1,2,4,5(+) 3,6,7,8(-) Are the + - lines compatable with the GIGEPOE? I thought it would be but it let the magic smoke out of a GIGEPOE. When I

Re: [AFMUG] contract verbage for site lease that covers all the bands

One phrase, I like it. Thanks. From: Af [mailto:af-boun...@afmug.com] On Behalf Of Chuck McCown Sent: Wednesday, August 30, 2017 6:18 AM To: af@afmug.com Subject: Re: [AFMUG] contract verbage for site lease that covers all the bands lessor grants exclusive use of (frequency ranges) From: Rory

[AFMUG] Cost effective battery charging and monitoring device

Hey all, I am getting away from using APC at a couple of our sites and right now I have installed a Tripp-Lite APS750 connected to 4 Deep cycle marine batteries for a total of 404 aH system. I'd like to be able to monitor the discharge rate of the batteries when power is out remotely. What have

Re: [AFMUG] Cost effective battery charging and monitoring device

4 batts in series or parallel? Shunt + sitemonitor would be a better way to go and you don’t have to write code. From: Sam Lambie Sent: Wednesday, August 30, 2017 9:06 AM To: af@afmug.com Subject: [AFMUG] Cost effective battery charging and monitoring device Hey all, I am getting away

Re: [AFMUG] Cost effective battery charging and monitoring device

Parallel. Site Monitor! Now where can I get a shunt? On Wed, Aug 30, 2017 at 9:09 AM, Chuck McCown wrote: > 4 batts in series or parallel? > Shunt + sitemonitor would be a better way to go and you don’t have to > write code. > > *From:* Sam Lambie > *Sent:* Wednesday, August

Re: [AFMUG] Netonix + GIGEPOE ?

Yes. The pairs on the GIGE-POE are 1/2 3/6 4/5 7/8 You must set the jumpers so that 1/2 and 4/5 are sending power to one of the terminals and 3/6 and 7/8 are sending the power to the other terminal. It is possible to short out the line if the jumpers are set wrong. From: Louis Arsenault

Re: [AFMUG] Cost effective battery charging and monitoring device

I think Forrest has them on his site with the site monitors. From: Sam Lambie Sent: Wednesday, August 30, 2017 9:15 AM To: af@afmug.com Subject: Re: [AFMUG] Cost effective battery charging and monitoring device Parallel. Site Monitor! Now where can I get a shunt? On Wed, Aug 30, 2017 at

Re: [AFMUG] contract verbage for site lease that covers all the bands

We use this fairly often: Interference:Lessor grants to Amplex exclusive right to use the Premises for the broadcast of radio signals in the frequency ranges of 2400 to 2500Mhz, 3550-3700Mhz and 5150-5825Mhz bands.Amplex may use other frequency bands at the site for which Amplex holds FCC

Re: [AFMUG] Cost effective battery charging and monitoring device

Yeah, up to 10 amp. -- Original Message -- From: "Chuck McCown" To: af@afmug.com Sent: 8/30/2017 11:18:36 AM Subject: Re: [AFMUG] Cost effective battery charging and monitoring device I think Forrest has them on his site with the site monitors. From:Sam Lambie

Re: [AFMUG] Cost effective battery charging and monitoring device

what does the shunt do in this case? On Wed, Aug 30, 2017 at 10:26 AM, Adam Moffett wrote: > Yeah, up to 10 amp. > > > -- Original Message -- > From: "Chuck McCown" > To: af@afmug.com > Sent: 8/30/2017 11:18:36 AM > Subject: Re: [AFMUG] Cost

Re: [AFMUG] [WISPA Members] how would you bill this? Voip question

For many(good reasons, Tax, reporting etc) we would break this down as follows:- 1) Application server (Phone/pbx functionality) (hosted applications are not subject to taxes). $50/MRC 2) Inbound Trunk w/ 1000 mou each. $19/each MRC (inbound calling min, multiple trunks would allow for

Re: [AFMUG] OT Hello Kopacetic Kool Kats

Congrats Jaime! Now be nice to that boy Mitch On 8/30/2017 5:15 PM, Jaime Solorza wrote: My name is Robert James Mowad Solorza.  I am number 15 Jaime Solorza

Re: [AFMUG] Motion Detection sensitivity setting

Does it support masking. We had a bear of a time at a factory til we realised a clipboard that had paper onnit fluttered enoug from a fan to trip md even though you couldnt really see it on the low res monitor. On Aug 30, 2017 10:30 PM, "Mitch Koep" wrote: Gen3 ? Gen 2s

[AFMUG] FRBs: Repeating Radio Signals Coming from Distant Galaxy Detected by Astronomers

Okay , who is using an Ubiquiti radio in Compliance Test Mode to tease these astronomers? http://www.newsweek.com/frb-fast-radio-bursts-deep-space-breakthrough-listen-657144 Jaime Solorza

Re: [AFMUG] how would you bill this? Voip question

1/2 hr labor rate - VoIP customization and configuration services On Aug 30, 2017 6:51 PM, "CBB - Jay Fuller" wrote: > > I've received an inquiry to setup an automated attendant for a growing > non-profit in our area. They take care of the vets. > There basically is

Re: [AFMUG] Magnets on a warm summer day

That is not bad pricing for what it is. On Wed, Aug 30, 2017 at 6:38 PM, Chuck McCown wrote: > I have not yet added up all the nuts bolts and washers but it will come in > at a list – retail price of between $200 and $225 MINUS MAGNETS > You just order it with the pull you need

Re: [AFMUG] Motion Detection sensitivity setting

Controller does, dunno if they are using that On Wed, Aug 30, 2017 at 11:19 PM, Steve Jones wrote: > Does it support masking. We had a bear of a time at a factory til we > realised a clipboard that had paper onnit fluttered enoug from a fan to trip > md even though you

[AFMUG] Motion Detection sensitivity setting

One of the cameras at Fabens Waste Water Treatment Plant is triggering night time recordings that manager asked me investigate and minimize. I changed sensitivity to 15 from 50. But I doubt it will help. Airvision Pro Cameras. I will check video on Friday. Ideas? Jaime Solorza

Re: [AFMUG] Motion Detection sensitivity setting

Gen3 ? Gen 2s always had an issue for us the night vision would trip motion for fly s and mosquito s. We finally put a yellow lamp near the cam and bugs went away (grams remedy for bugs in MN at night) shocked as I was Mitch On 8/30/2017 9:38 PM, Jaime Solorza wrote: One of the cameras