£ cables and
interconnects). For me TT3.0 works - I don't know why but it does!
I've kept the screen on, IR on and don't use tt -k to kill active
daemons - some of us need the flexibility!
Thank you Klaus for something that really seems to work.
Bob
--
bobertuk
1 x Touch - SC 7.7.1 - SSOTS v4.14
1 x
that transcoding is carried out by the touch though!
Could be the recent LMS 7.7.1 nightly I suppose!
Bob
--
bobertuk
1 x Touch - SC 7.7.1 - SSOTS v4.14
1 x Radio
1 x Boom
Lavry DA-10 DAC
QNAP TS-509 3.5.1 build 1002T
Starfish Pre-amp : Based on NAIM
Heavily modified NAIM NAP 250 Power-amp
. ;)
That was it :)
Need to reset Touch reinstall TT3.0 after LMS ( presumably SbS)
update.
Bob
--
bobertuk
1 x Touch - SC 7.7.1 - SSOTS v4.14
1 x Radio
1 x Boom
Lavry DA-10 DAC
QNAP TS-509 3.5.1 build 1002T
Starfish Pre-amp : Based on NAIM
Heavily modified NAIM NAP 250 Power-amp
Behringer DEQ2496
Linn
.
This was after a complete Touch 'Restore Factory Settings'.
Any suggestions?
Bob
--
bobertuk
1 x Touch - SC 7.7.1 - SSOTS v4.14
1 x Radio
1 x Boom
Lavry DA-10 DAC
QNAP TS-509 3.5.1 build 1002T
Starfish Pre-amp : Based on NAIM
Heavily modified NAIM NAP 250 Power-amp
Behringer DEQ2496
Linn
set to no rate limiting.
Server CPU occasionally spikes to 24% but is mostly under 4% with
hi-res files.
Thanks for your help.
Bob
--
bobertuk
1 x Touch - SC 7.7.1 - SSOTS v4.14
1 x Radio
1 x Boom
Lavry DA-10 DAC
QNAP TS-509 3.5.1 build 1002T
Starfish Pre-amp : Based on NAIM
Heavily modified
with 24bit/96kHz
cleared immediately.
So... if anyone in the UK using a BT HomeHub 3 is having issues with
TT3.0, that could well be the problem.
Hope this is helpful info.
Bob
--
bobertuk
1 x Touch - SC 7.7.1 - SSOTS v4.14
1 x Radio
1 x Boom
Lavry DA-10 DAC
QNAP TS-509 3.5.1 build 1002T
Starfish
to the Touch for some time.
I kind of agree with Phil - that the TT buffer shouldn't cause network
issues. Maybe the Homehub was only just coping with 24/96 - I have had
other problems with it (homehub) stalling on internet and/or networking
so requiring a fairly frequent reboot.
Bob
--
bobertuk
Phil,
Presumably you use 2x 'Startech 10/100 Ethernet To Multi Mode Fiber
Media'. One at router end connected by fibre to another at Touch end
with short UTP cables.
i.e.
Router---UTP---Startech---Fiber---Startech---UTP---Touch
Or is it simpler than that?
Bob
--
bobertuk
1 x
At that price it needs to be a superconductor with a lifetimes supply of
cryogenic Helium :)
--
bobertuk
1 x Touch - SC 7.7.1 - SSOTS v4.14
1 x Radio
1 x Boom
Lavry DA-10 DAC
QNAP TS-509 3.5.1 build 1002T
Starfish Pre-amp : Based on NAIM
Heavily modified NAIM NAP 250 Power-amp
Behringer
Fahzz;673066 Wrote:
So is it $3 each or per pair? I need to know before I talk to the
bank...
For a 5M length...
--
bobertuk
1 x Touch - SC 7.7.1 - SSOTS v4.14
1 x Radio
1 x Boom
Lavry DA-10 DAC
QNAP TS-509 3.5.1 build 1002T
Starfish Pre-amp : Based on NAIM
Heavily modified NAIM NAP
things like AV, VNC
nothing else is running. I've also un-installed all the retailer kak'
and stopped non essential services.
Thanks
Bob
P.S. Have you noticed that Inguz for Windows has recently been updated
to v0.93?
--
bobertuk
1 x Touch - SC 7.7.1 - SSOTS v4.14
1 x Radio
1 x Boom
Lavry DA
ralphpnj;696578 Wrote:
Well at least the OP has the decency to explain everything you need to
know in his user name: Deaf Cat
Try using a liquid cooled PC instead of an air cooled PC - the sound is
much more.
...fluid vs airy? :)
--
bobertuk
1 x Touch - SC 7.7.1 - SSOTS v4.14
1 x
magiccarpetride wrote:
Double blind listening tests are tricky at best because they tend to
deliver a lot, and I mean a lot of false positives. There are well
documented cases where sufficiently large population of double blind
testers were reporting significant differences in the sound
tonyptony wrote:
Does anyone know if Inguz uses the alsa plugin layer or the jive_alsa
process? It would be unfortunate if this interesting new app is not able
to run with Inguz in line. I'll have to try it out and see.
I've been using Phil Leighs 'custom-convert.conf' for Inguz which uses
adamdea wrote:
Triode thank you for your sterling efforts to provide something tangible
and useful namely usb and 192 output capability
I'm afraid that getting involved in any discussion about subjective
improvements in this area is inevitably going to get you into
intractable exchanges
is that running the WebUI on Firefox or Safari
on a MAC some of the 'up' buttons do nothing. In IE8 they all work as
expected.
--
bobertuk
1 x Touch - SC 7.6.0 - SSOTS v4.91
1 x Radio
1 x Boom
Lavry DA-10 DAC
QNAP TS-509 3.3.6 build 1110T
Starfish Pre-amp : Based on NAIM
Heavily modified NAIM NAP 250
!
Bob
--
bobertuk
1 x Touch - SC 7.6.0 - SSOTS v4.91
1 x Radio
1 x Boom
Lavry DA-10 DAC
QNAP TS-509 3.3.6 build 1110T
Starfish Pre-amp : Based on NAIM
Heavily modified NAIM NAP 250 Power-amp
Behringer DEQ2496
Linn Isobarik DMS
Why not run cat6 instead? You don't need it at the moment but if you're
laying it in the walls it will provide much higher ethernet speeds in
future - it's inevitable that speeds will increase.
Bob
--
bobertuk
1 x Touch - SC 7.6.0 - SSOTS v4.91
1 x Radio
1 x Boom
Lavry DA-10 DAC
QNAP TS-509
... where are you :)
TIA
Bob
--
bobertuk
1 x Touch - SC 7.6.0 - SSOTS v4.91
1 x Radio
1 x Boom
Lavry DA-10 DAC
QNAP TS-509 3.3.6 build 1110T
Starfish Pre-amp : Based on NAIM
Heavily modified NAIM NAP 250 Power-amp
Behringer DEQ2496
Linn Isobarik DMS
#client:f0:b4:79:4e:94:0b# * END AUTOMATICALLY GENERATED
SECTION - DO NOT EDIT *
--
bobertuk
1 x Touch - SC 7.6.0 - SSOTS v4.91
1 x Radio
1 x Boom
Lavry DA-10 DAC
QNAP TS-509 3.3.6 build 1110T
Starfish Pre-amp : Based on NAIM
Heavily modified NAIM NAP 250 Power
Phil,
I've edited custom-convert.conf Plugin.pm - same error and still
nothing in error or log.txt.
Been searching internet for another binary version of sox but can't
find one so far. Currently have sox v14.3.0 - can't even find an
earlier version :(
Bob
--
bobertuk
1 x Touch - SC 7.6.0
that would cause the broken pipe error...
I'll keep investigating...
Thanks Phil.
The only player of interest at the moment is 00:04:20:xx:xx:xx - I'll
delete the entry for the other one anyway.
Bob
--
bobertuk
1 x Touch - SC 7.6.0 - SSOTS v4.91
1 x Radio
1 x Boom
Lavry DA-10 DAC
QNAP TS-509
pid
or something else?
Bob
--
bobertuk
1 x Touch - SC 7.6.0 - SSOTS v4.91
1 x Radio
1 x Boom
Lavry DA-10 DAC
QNAP TS-509 3.3.6 build 1110T
Starfish Pre-amp : Based on NAIM
Heavily modified NAIM NAP 250 Power-amp
Behringer DEQ2496
Linn Isobarik DMS
new prioritiy
chrt -f -p 55 $jalsa1 /dev/null
How can I check that the change has been applied?
I included both jive_alsa's to make it easier to change if I use the
wrong one.
Thanks
Bob
--
bobertuk
1 x Touch - SC 7.6.0 - SSOTS v4.91
1 x Radio
1 x Boom
Lavry DA-10 DAC
QNAP TS-509 3.3.6
-d
`
chrt -f -p 55 $jalsa1
BUT - when included in the rcS script it doesn't work.
Ideas anyone?
Bob
--
bobertuk
1 x Touch - SC 7.6.0 - SSOTS v4.91
1 x Radio
1 x Boom
Lavry DA-10 DAC
QNAP TS-509 3.3.6 build 1110T
Starfish Pre-amp : Based on NAIM
Heavily modified NAIM NAP 250 Power-amp
$jalsa1 /dev/null
== End code ==
Thanks
Bob
--
bobertuk
1 x Touch - SC 7.6.0 - SSOTS v4.91
1 x Radio
1 x Boom
Lavry DA-10 DAC
QNAP TS-509 3.3.6 build 1110T
Starfish Pre-amp : Based on NAIM
Heavily modified NAIM NAP 250 Power-amp
Behringer DEQ2496
Linn Isobarik DMS
: SBT spdif -Supra Trico Coax - Audio-gd NFB-3 - Linn black
interconnects - Majik-I (just as preamp) - 2xLK100 - Active
Keilidhs
/Thomas
I think it's normal for the jive_alsa pid to vary - mine seems be
either 718 or 719.
Bob
--
bobertuk
1 x Touch - SC 7.6.0 - SSOTS v4.91
1 x Radio
1 x
the change in the
rcS file itself? Same difference, eh?
If you enter each command manually at the touch command-line it will
take effect immediately. If you want it to survive a Touch reboot -
e.g. a firmware update - it will need to be written into the Touch rcS
file as well.
Bob
--
bobertuk
1 x
SB_priority
Doing it this way is probably more robust and does work. Obviously use
your own preferred values in each 'chrt -f -p xx $xxx' setting.
Bob
--
bobertuk
1 x Touch - SC 7.6.0 - SSOTS v4.91
1 x Radio
1 x Boom
Lavry DA-10 DAC
QNAP TS-509 3.3.6 build 1110T
Starfish Pre-amp : Based on NAIM
for jive_alsa 'sound effects' was just to help sort out which
was the correct jive_alsa in the first place. As long as you leave in
the code for finding and setting 'jive_alsa audio', the code for sound
effects can be left out.
Bob
--
bobertuk
1 x Touch - SC 7.6.0 - SSOTS v4.91
1 x Radio
1 x
before it executes it's commands.
--
bobertuk
1 x Touch - SC 7.6.0 - SSOTS v4.91
1 x Radio
1 x Boom
Lavry DA-10 DAC
QNAP TS-509 3.3.6 build 1110T
Starfish Pre-amp : Based on NAIM
Heavily modified NAIM NAP 250 Power-amp
Behringer DEQ2496
Linn Isobarik DMS
in the late 600's -
early 700's - my jive_alsa pid has varied between 679, 718 or 719 far
:). But that's why the check to find the correct one is carried out.
Bob
--
bobertuk
1 x Touch - SC 7.6.0 - SSOTS v4.91
1 x Radio
1 x Boom
Lavry DA-10 DAC
QNAP TS-509 3.3.6 build 1110T
Starfish Pre-amp
captaink;654070 Wrote:
Seems a bit steep?
http://lampizator.eu/szop/szopproducts/LZ-TRANSPORT/Lampizator%20transport.html
A bit steep yes - and some diabolical solder work as a free gift by the
looks of it!
--
bobertuk
1 x Touch - SC 7.6.0 - SSOTS v4.91
1 x Radio
1 x Boom
Lavry DA-10
be considered good
quality without costing 'thousands'. This is a genuine question - not a
troll. I have only ever bought £5 - £10 cables and don't want to find
out the hard way that more expensive cables are no better :)
Bob
--
bobertuk
1 x Touch - SC 7.6.0 - SSOTS v4.91
1 x Radio
1 x Boom
Lavry DA-10
it was worth it.
Thanks Phil, I'll give one a go if I can find a used one.
Bob
--
bobertuk
1 x Touch - SC 7.6.0 - SSOTS v4.91
1 x Radio
1 x Boom
Lavry DA-10 DAC
QNAP TS-509 3.3.6 build 1110T
Starfish Pre-amp : Based on NAIM
Heavily modified NAIM NAP 250 Power-amp
Behringer DEQ2496
Linn Isobarik
is runing from a QNAP TS-509 NAS which should be quite
capable of transcoding with SOX - the errors don't seem to indicate a
problem with processor power either. Both files play on PC in
'MediaMonkey' and normal 'flac' plays without a problem from the NAS.
Any thoughts appreciated?
Bob
--
bobertuk
1
Phil Leigh;437909 Wrote:
What version of SC are you running - it looks like you need a later
version of SOX. From memory you need SOX 14.2 or later.
I'm using SC 7.3.4 so I guess(?) it's got the latest SOX. How can I
check which version is installed (in Linux)?
Bob
--
bobertuk
1 x Duet
(flac) is playing.
Thanks again
Bob
--
bobertuk
1 x Duet - SC 7.3.4 - SSOTS v3.18
Lavry DA-10 DAC
QNAP TS-509 3.1.0 build 0627T
Starfish Pre-amp : Based on NAIM
Heavily modified NAIM NAP 250 Power-amp
Behringer DEQ2496
Linn Isobarik DMS
Meant to add to the previous message.
Sounds marvellous as well.
Bob
--
bobertuk
1 x Duet - SC 7.3.4 - SSOTS v3.18
Lavry DA-10 DAC
QNAP TS-509 3.1.0 build 0627T
Starfish Pre-amp : Based on NAIM
Heavily modified NAIM NAP 250 Power-amp
Behringer DEQ2496
Linn Isobarik DMS
would have the necessay
knowledge - although there are almost certainly some that would
disagree!
Bob
--
bobertuk
1 x Duet - SC 7.3.4 - SSOTS v3.18
Lavry DA-10 DAC
QNAP TS-509 3.1.0 build 0627T
Starfish Pre-amp : Based on NAIM
Heavily modified NAIM NAP 250 Power-amp
Behringer DEQ2496
Linn
:-)
Thanks
Bob
--
bobertuk
1 x Duet - SC 7.3.4 - SSOTS v3.18
1 x Boom
Lavry DA-10 DAC
QNAP TS-509 3.1.0 build 0627T
Starfish Pre-amp : Based on NAIM
Heavily modified NAIM NAP 250 Power-amp
Behringer DEQ2496
Linn Isobarik DMS
quality can at best be described as
sounding 'different'. Sometimes what is described as better/different is
simply wishful thinking.
I always let my own ears decide and will eventually get around to a
comparative listen of coax v optical. My question was 'out of interest
only'.
Bob
--
bobertuk
effect as well. Like me,
he was a burn in skeptic as but after completing a pre-amp build (of
his design), we are both converts.
Cables though - apart from a few eccentric designs (Litz for example),
I'm still a skeptic :-)
Bob
--
bobertuk
1 x Duet - SC 7.3.4 - SSOTS v3.18
1 x Boom
Lavry DA-10
Wirrunna, tried looking at the YouTube video but it doesn't seem to
exist anymore :(
I managed to find IE on Windows 10 as well and as long as silverlight is
installed, as you say the graphical display is there. I have iPhone 6
with iPeng but can't find any way to use it to set up EQ or to save
Wirrunna,
I found the "|" earlier and discovered that it saved the profile. In my
attempts to get the graphical EQ display working I discovered a
Silverlight installer for Mac - silverlight needs activating through
Safari security preferences. That got the EQ display working and the
save button
The Inguz website http://inguzaudio.com
is partially down and seems to have been like that for some months.
The front page is still there but when trying to drill down to the
installation pages there are only errors.
Does anyone know of any other way to access the full site?
1 x Touch
1 x
John & Wirrunna
Using Johns commented instructions I have Inguz working on an Intel-NUC
which seems to have more than enough CPU power to run Inguz. I'm using
Ubuntu 16.04 LTS. John, I just followed your instructions to the letter,
apart from having to modify permissions a little.
The biggest
JohnB wrote:
> The download pages for InguzEQ and InguzDSP are still there (you need
> both), but there aren't any links to them from the front page.
>
> InguzEQ: http://inguzaudio.com/EQ/download.php
> InguzDSP: http://inguzaudio.com/DSP/download.php
>
> BUT, the installation instruction
JohnB wrote:
> Sure, I'll do that - but first I need to hunt out my notes and make sure
> that they make sense (you know how it is when you write notes for your
> own benefit). It will take a day or so.
Thank you. No problem about how long it takes.
>
> Are you hoping to use it for DRC or
Does anyone know what the various Inguz settings are for?
There are obvious ones of course, EQ and Balance for instance. But
others are not so obvious and most of the Inguz website isn't accessible
so it isn't possible to gather the information from there. JohnB was
kind enough to explain what
Wirrunna wrote:
> Bob and John,
> ...
>
> In an earlier life I spent 10 years writing IBM Assembler, so I had a
> look at the plugin code in
> C:\Program Files (x86)\Squeezebox\server\Plugins\InguzEQ,
> strings.txt contains the character string that appears on the Inguz
> screen with each
If anyone is interested attached is a zip file containing all of the
Inguz web site pages and content from 2015 which I downloaded it from
the 'Wayback Machine' one page at a time. The page URL links don't link
through to the other pages so each page needs to be looked at
individually but it may
I've found a fix for the 'Save Preset' button...
Replace Inguz plugin 'index.html' line 592 with...
Code:
original index.html line 592
Code:
gegen wrote:
> Hoping someone is going to correct me on that one :)
Well... not so much a correction but a possibility - which I haven't
tried for Inguz. Have a look at...
gegen wrote:
> Hi bobertuk
> Thanks those pages really helped.
> Noticed you're using an XU4 with ubuntu 16.04, same here, would love to
> get inguz running on that setup but haven't had much luck. Did you
> manage to get it working on the XU4?
> I got the plugin installed
55 matches
Mail list logo