Ok thanks anywaySent from my Verizon, Samsung Galaxy Tablet
Original message From: ahycrace via CnC-List
Date: 7/10/20 8:47 AM (GMT-05:00) To:
cnc-list@cnc-list.com Cc: ahycrace Subject: Re: Stus-List
HilleRange stove parts BrianI have a stainless steel hillerange not sure
The control in backSent from my Verizon, Samsung Galaxy Tablet
Original message From: ahycrace via CnC-List
Date: 7/10/20 8:47 AM (GMT-05:00) To:
cnc-list@cnc-list.com Cc: ahycrace Subject: Re: Stus-List
HilleRange stove parts BrianI have a stainless steel hillerange not
BrianI have a stainless steel hillerange not sure of the model. The control
wingback of the oven knob is frozen I need that control assembly. Is your
stove a stainless steel model and could I send you a picture of the part I
need. I would be happy to send Stu a contribution as payment.Sent from
hing cabin floor
I did mine last winter and used a standard floor polyurethane: Minwax Fast
Drying Polyurethane Satin. So far, so good. Dave
S/V Aries
1990 C&C 34+
New London, CT
On Jul 7, 2020, at 7:44 AM, ahycrace via CnC-List wrote:
Sorry for bringing this up again
Sorry for bringing this up again I know it was discussed before but I can't
find the old discussions. I have just about finished stripping the floor in
Liberty using that non toxic orange stuff from home depot it worked pretty
good. I want to coat it with something not to slippery that looks go
I just accidentally sent a few pics of my owners manual to the list please
disregard my posting.Thank you ..Gary KolcSent from my Verizon, Samsung
Galaxy Tablet___
Thanks everyone for supporting this list with your contributions. Each and
eve
Matt
when I did my backing plates I used colloidal silica and used wax paper to
allow the plates to be removed after everything set up. You must protect the
threads from the silica as well. http://gkolc3.wixsite.com/liberty
> On February 6, 2019 at 12:22 PM Thomas Delaney via CnC-List
> w
I have a 10 inch samsung with Opencpn and have opencpn on my sam phone. I would
like to get ais as well , can I do that with my tablet? I have an old green
screen Raytheon radar and would like something newer but this unit is working
ok so that is on the back burner. I also have a Dell laptop t
Gary Kolc. "Liberty"38 foot c&c 1976Hull #99Purchased 2002
Sent from my Verizon, Samsung Galaxy smartphone
Original message From: james via CnC-List
Date: 9/30/18 8:08 PM (GMT-05:00) To: Don Kern via
CnC-List Cc: james Subject: Re:
Stus-List Rob - C&C long time question
Gary
I've had my rudder off 3 times now (don't ask!). The first time I was
able to get the bolts out with a little struggle but they came apart with no
damage. I put some wood blocks under the rudder so when I took the top collar
off it only dropped down an inch or so . We dropped it
I once replaced the impeller on my yanmar 3gm30 and when I put the plate back
on the pump it was not seated properly and the pump kept losing its prime. With
enough rpm s it would start pumping again only to lose its prime again on start
up. Might be worth checking. The plate must be air/water t
just the connection (cable)?
Marek
Sent from
Mail for Windows 10
From: CnC-List on behalf of ahycrace ahycrace
via CnC-List
Sent: Friday, May 4, 2018 8:07:32 PM
To: cnc-list@cnc-list.com
Cc: ahycrace ahycrace
Subject: Stus-List depth sounder
Well we went in the water today and
y to check it out is to borrow a transducer from
someone else and plug it in. See you tomorrow.GaryS/V Kaylarah'90 C&C 37+East
Greenwich, RI, USA
~~~_/)~~
On Fri, May 4, 2018 at 8:07 PM, ahycrace ahycrace via CnC-List
wrote:
Well we went in the water today and everyt
Well we went in the water today and everything was good except the
depth sounder. The only thing that shows up on the readout is three
dashes thinking the transducer is probably bad anyone been down
this path before. Raymarine st60s.
Gary K
Liberty
Al
After checking looks like 15$ is a little low sorry
Gary
> On April 15, 2018 at 4:30 PM ahycrace ahycrace wrote:
>
>
> Al
> I might be interested in the injectors are they rebuilt and unused if so how
> much is 50%, 15$ a piece?
>
> Gary Kolc "Liberty"
>
>
> > On April 15, 2018 at 2:02 PM Al
Al
I might be interested in the injectors are they rebuilt and unused if so how
much is 50%, 15$ a piece?
Gary Kolc "Liberty"
> On April 15, 2018 at 2:02 PM Allan Hester via CnC-List
> wrote:
>
>
>
> Hi,
>
>
> I am new to the list although I have been enjoying
check them out. A neighbor is an agent.
Virus-free. www.avg.com
On Wed, Feb 21, 2018 at 6:05 PM, ahycrace ahycrace via CnC-List
wrote:
Well I just got some information from the broker that I talked to at the boat
show. He said
Well I just got some information from the broker that I talked to at the boat
show. He said that most of the quotes he got were the same or more than boat
US. He did find one company that had a good rating named Berkley Recreational
Marine and they came in at 924$ with a 3% deductible. Boat US
I called back again and they went from 1125$ to 1092$ for 40k still way to
much. I talked to an agent at the providence boat show (maritime insurance
int.) and he agreed that boat US was unusually high. I will talk to him next
week and he will have quotes for me maybe an agent is the way to go.
Hello all
Well I just got my insurance bill from boat US and it went up
238$ a pretty big increase. I called to ask why and they said it was nothing
on my end rates just went up. I am wondering if everybody else got raised as
well? I tried to increase my deductible which is
I also use tef-gel to protect against galling however I never have backed off
when redoing the torque on my bolts. I always go 10% less on the accepted
engineering values. Its been 10 years since I redid my keel, backing plates are
5/16 stainless perhaps this year I will back off bolts and add m
appreciate the
input.
Any lubricant going forward as a preventative?
> On Oct 3, 2017, at 12:53 PM, ahycrace--- via CnC-List
> wrote:
>
> Should use 300 series its more corrosion resistant. I used 316.
>
> Gary Kolc 38' mk ll "liberty"
>
>
> Liz Mathe
Should use 300 series its more corrosion resistant. I used 316.
Gary Kolc 38' mk ll "liberty"
Liz Mather via CnC-List wrote:
> Good Morning!
>
> I have a question actually looking for opinion and experiences replacing the
> keel backing plates, washers complete.
> Thinking of replacing
Sailing down Narragansett bay a few years ago broad reach 7kts we hear a loud
BANG and no steering. Get the sails down and anchor. We look under the cockpit
and see that the idler plate is so rusted that one of the pullys has pulled
right off. Get the emergency tiller out and attach it motor hom
few nights before heading to Block Island. Hope to catch some racing en
route to Block Chuck Gilchrest S/V Half Magic1983 35 LandfallPadanaram,MA
Sent from my iPhone
On Aug 10, 2017, at 6:02 PM, ahycrace via CnC-List
wrote:
Chuck still going to newportv next week for the J class races?Gary Kolc
Chuck still going to newport next week for the J class races?Gary Kolc
"Liberty"
Sent from my Verizon, Samsung Galaxy smartphone
Original message From: Chuck Gilchrest via CnC-List
Date: 8/10/17 3:39 PM (GMT-05:00) To:
cnc-list@cnc-list.com Cc: Chuck Gilchrest Subject:
R
Fix the pump if possible
Gary Kolc "Liberty"
Sent from my Verizon, Samsung Galaxy smartphone
Original message From: Matthew Schlanger via CnC-List
Date: 7/25/17 11:45 AM (GMT-05:00) To:
cnc-list@cnc-list.com Cc: Matthew Schlanger Subject:
Stus-List Water pump for Yanmar 3GM
Just replaced mine last week yanmar 3gm30. Clean off the spline and put fresh
grease on it slide it into the engine. Mine had 6 bolts tighten them up in an
opposing pattern. Reconnect everything as it was.
Gary. "Liberty"
Mine does that every few years i remove the pin connections and clean off with
alcohol and coat with wd 40 or dialectical grease and problem went away. It
did it this week on the way to cuttyhunk and i slaped the head it has worked
since then. The salt gets on the connections i think
Sent fr
I just did this on my pump 3gm30. The problem was the rear seal. I just
replaced it no problem. Clean off the shaft with 600 wet paper as well as the
other surface. Probably just the seal easy fix. Gary
Liberty 38' mk ll
Sent from my Verizon, Samsung Galaxy smartphone
The outbound hose is coiled below the sink and the end hangs on a small hook. I
just grab it and put it in the sink.
Gary
Sent from my Verizon, Samsung Galaxy smartphone
Original message From: Dave via CnC-List
Date: 6/5/17 7
I have small square plastic container located under the engine. That hose is
connected to that container which has a small bilge pump in it. The pump has a
hose that ends under the sink where there is a switch. I take the hose put it
in the sink and flip the switch let the water pump into the si
> Fred Street -- Minneapolis
> S/V Oceanis (1979 C&C Landfall 38) -- Bayfield, WI
>
> > On May 29, 2017, at 10:49 AM, Neil Gallagher via CnC-List
> > wrote:
> >
> > Are you thinking of Cajun Rope?
> >
> > Neil Gallagher
> > Weatherly 35
Weatherly 35-1
> > Glen Cove, NY
> >
> > On 5/29/2017 11:28 AM, ahycrace--- via CnC-List wrote:
> >> Looks line I have to replace the furling line on Liberty"s furling drum.
> >> What was the name of that mail o
Looks line I have to replace the furling line on Liberty"s furling drum. What
was the name of that mail order company that sells
reasonable priced quality line I just cant remember it. ( Old timers
syndrome. )
Gary
Ron
A few years ago I took my keel off because of weeping at the keel to
hull seam. I ended up replacing all of my bolts
ans a bunch of other glass work. Where in Bristol is your boat? Looks like
you have very good backing plates but some other
issues. I've been a machinist for 40 yr
What is the theory behind loosening the bolts before re-tightening?
Gary
"liberty"
Ken Heaton via CnC-List wrote:
> Hello Ron,
>
>
> 1. What are the torque values that you’ve used?
>
>
> 3/4" Keel Bol
There is a boat show in Annapolis on the 28th to the 30th we were thinking of
making it a road trip.
Can anybody tell me if it is a worthwhile event to go to? Spring, boat show,
fresh crabs, cold beer
sounds like its worth the trip from Rhode Island to me. Has anybody from the
area attended in
Hypalon WILL last much longer that's why I went with an achilles. Be carefull
to stay away from cheap boats made in China big problems. I have an 8hp nisson
that I take off with a removeable crane. I think its called a little boy crane
when you are done with it it can be removed in about 2 min.
Achillies 9.6 had one that lasted over 20 yrs bought it used !! Just got a new
one great boat. Tows very good.
nothing but good things to say about it.
Gary Kolc
"Liberty"
Apponaug Harbor (East Greenwich Ba
box.
>
> Dennis C.
>
> On Mon, Feb 13, 2017 at 5:17 PM, Neil Schiller via CnC-List <
> cnc-list@cnc-list.com> wrote:
>
> > Galvanic corrosion?
> >
> > Neil Schiller
> > 1970 Redwing 35, Hull #7
> > (C&C 35, Mark I)
> > "Cors
, Mark I)
> "Corsair"
> White Lake, Michigan
>
> On 2/13/2017 5:39 PM, ahycrace via CnC-List wrote:
> > The maststep on liberty is cast stainless heavy yes but very strong
> > why would any of them be made of anything else? 1976 mk ll
> >
> >
> &
The maststep on liberty is cast stainless heavy yes but very strong why would
any of them be made of anything else? 1976 mk ll
Sent from my Verizon, Samsung Galaxy smartphone
Original message From: Dreuge via CnC-List
Date: 2/13/17 11:01 AM (GMT-05:00) To:
cnc-list@cnc-lis
Don
On my boat they drilled the holes in the right place but never used any
calking around the bolts, that was swell wasn't it !!
Gary K
Don Wagner via CnC-List wrote:
> I have experienced keel
Barbara
I have been down the worst case scenario road and the whole
story is on the cnc photoalbum. ( http://www.cncphotoalbum.com/ ). This really
was the worst case and I agree with the others that you should start with
tightening the keel bolt first to see what happens. I thin
I was at the consignment store today and I picked up a Danforth 20lb hi
tensile anchor. When I got it home and looked at it more closely I discovered
that the the rail along the top was shortened by 3" on each side (6" total). I
think this was done so it would fit in someone's anchor locker. T
I put a small clam cleat on the pedestal and use a small pc of rope. It always
stays put.
Gary Kolc
mike amirault via CnC-List wrote:
> There should be a saddle clamp on the throttle cable inside the STBD cockpit
> locker, near the companionway. Tighten it down to provide more resistan
So bottom line is poly Glow good or not so much? Friend of mine has a badly
chalked Santana and received for free an almost full kit of Polyglow he asked
me if it was worth using.
Gary Kolc
Joseph Bognar via CnC-List wrote:
> I found that if your fenders rub the hull in the same spot . I
Does Poly Glow go bad after a while how long does it last why should you have
to take it off?
Gary
Kolc
"Liberty"
get some teflon
> tape around it and re-tighten)
>
> Mike
> Atacama 33mkii
>
>
> Sent wirelessly from my BlackBerry device on the Bell network.
> Envoyé sans fil par mon terminal mobile BlackBerry sur le réseau de Bell.
>
> -Original Message-
> From: ah
gary Kolc via CnC-List wrote:
I put Liberty in the water today and while doing my check of all thru hulls I
noticed that the knot meter was leaking
In between the large nut of the fixture and the wooden backing plate. Not much
of a leak but noticeable more like
a weep. The inside of the
My boat "Liberty" 38' Mk II was done in flag blue 15 years ago and now up
close it looks like crap from scratches and a few dings from the anchor. We
also have some cracking in the paint long lines of it near the bow. I have been
told it is from the hull heating up at different rates ( the pain
Al
See the C&C photo album story of "Liberty" repair same thing as Jason
but more complicated.
http://gkolc3.wix.com/liberty
Gary
Alan Bergen via CnC-List wrote:
> Jason:
>
> In 2004 I noticed the smile on my boat, when I
I see that Stu has just posted some information about my keel repair project of
a few years ago. I have just finished a small site with all my photos of the
project along with a running log of the explanation of the process, the link
for that site is here. Stu can now add this site to our list a
h water flush.
> > Joe
> > Coquina
> >
> >
> > -Original Message-
> > From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of
> > ahycrace--- via CnC-List
> > Sent: Wednesday, December 30, 2015 4:19 PM
> > To: cnc-list@cnc-list.co
We had the dink flip over in buzzards bay and we were lucky to get most of the
contents back so now (for the last 20 yrs) we never keep anything in it when we
are underway.
Gary Kolc
"Liberty"
-
I agree I have a max prop 2 blade and reverse is just incredible it's like a
tug boat is backing you up.
Gary Kolc
1976 38' MKII
Liberty
Indigo via CnC-List wrote:
> "No two blade prop will do very well in reverse although I would get a
> geared one so that you can be sure that it opened
Ahmet
If there is oil or grease on the threads of the bolt you should
reduce the torque by aprox 10%. Torque numbers are given assuming threads are
dry. Using lube would cause an over tightened condition.
ection on the C&C group site, otherwise, temporarily you
> can email it to me (ah...@sailnomad.com) and I can add it to my images
> website.
> Ahmet
>
> On Tue, Nov 24, 2015 at 6:39 PM, ahycrace--- via CnC-List <
> cnc-list@cnc-list.com> wrote:
>
> > I have a
I have a 16 part word log with pictures showing the replacement of my keel and
keel bolts. How can I send this to Stu for possible posting.
Gary Kolc
Liberty
_
Ahmet
I have a 1976 38' MKII and the aft keelbolt looked like your
picture #3 only worse the washer was actually curved as well as not sitting
flat. I eventually replaced the washer with a machined backing plate made of
stainless. I am sure they came from the factory that way.
I spent about 10 boat bucks there having keel work done and at the end of the
project I felt that I was taken advantage of and I would never do business with
them again. Just my opinion.
Gary K
I take a trash bag and push the opening onto the engine below the filter. When
the filter is removed I just let the whole mess drop into the bag. I have a
shop rag handy to wipe off any oil that escapes the bag. I have found that a
large trash bag that is also thick works best and I take the fir
“Believe me, my young friend, there is nothing - absolutely nothing - half so
much worth doing as simply messing about in boats.”
― Kenneth Grahame, The Wind in the Willows
I would drill into the head until it was gone using cobalt or carbide, this
has always worked for me. Easier to do on a bench in a vise if possible. A
small drill press would be ideal.
Gary Kolc
Brian
I'll ask Ron what the old prop/problem was and get back to you on
that.
Gary K
Gary Russell via CnC-List wrote:
> Hi Brian,
> I know the new prop is a Gori folding prop, but I don't know what the
> problematic problem was
Gary
Ron solved the vibration problem with a new prop last year smooth as
silk now. He also had the backstay area reinforced and the hull was addressed
as well, it should fly through a survey no problem. The boat is in better shape
than Ron is !
.
Gary K
Josh Muckley via CnC-List wrote:
> "What's a cross over elbow?" I was wondering the same thing...
> On May 5, 2015 6:29 PM, "Richard Bush via CnC-List"
> wrote:
>
> > OK, what's a crossover elbow?
> >
>
Tom
I had the same problem and it turned out to be the crossover elbow,
changed it and the problem went away. You can get a kit with all new bolts and
gaskets from oldport marine in Newport RI. (Yanmar 3gm30) I hear it is a
common thing. It was easy to do.
Petar
We will be at the boatyard all day Sat. (4/18) stop by after 12 and
check out my traveler set up.
Gary"Liberty"
Petar Horvatic via CnC-List wrote:
> Hi everyone,
>
> Has anyone (DIY) installed a second mainsheet traveler
Petar
My boat Liberty has 2 travelers, one on the cabin top. If you would
like to you could stop by Apponaug and I'll pull the headliner off so you can
see how it was installed.
Gary Kolc
Petar Horvatic via CnC-List wrote:
> Hi everyone,
>
> Has a
ahycrace--- via CnC-List wrote:
> Monty
>I have the ST60 as well and my unit always spins slower than the
> other units in the marina and when things get real light it won't turn at
> all. I tried lubing it with a dry lube product and that helped a little but
&g
Monty
I have the ST60 as well and my unit always spins slower than the
other units in the marina and when things get real light it won't turn at all.
I tried lubing it with a dry lube product and that helped a little but not
much. Did you notice that issue with your setup when you wer
list
Gark Kolc
Liberty
Apponaug Harbor Warwick RI
Neil Gallagher via CnC-List wrote:
> Vote: List
>
> Stu, if the costs are not covered routinely by donations, I suggest you
> let us know that too.
>
> Neil Gallagher
> Weatherly, 35-1
> Glen Cove, NY
>
>
> On 3/13/2015 5:32 PM, Stu v
Ron
I have a 38 foot Mk II with a 3gm30 engine (27 hp). We have a 2 blade
feathering max prop and at 3000 rpm we get about
6.5 to 6.75 kts. You should check what your pitch is set to and possibly
re-adjust it. It is not that hard to do.
Gary
I have been using a dri-diver for years now and the pad is shot. I
can't find anyplace that will replace it I was wondering if we could by the
stuff by the sq ft or sq yd hope someone can help on this. I think it is a 3m
product I will keep looking for now.
The past owner of our boat would clip the main halyard to the base of the mast
and let it flop around and that is how our spreader was damaged by the wire.
Gary
ahycrace--- via CnC-List wrote:
>
I have a 38 MK II and the past owner let
I have a 38 MK II and the past owner let the wire on the main halyard rub on
the trailing edge of the spreader. It looked just like a crack but it was just
the material that had worn away. We had a piece welded on the back of the worn
out area. It looks a little weird so we just don't look at
in the bottom of the space inside the transom and have storage
space for spare dock lines, the floats for my anchor trip line, and some other
infrequently used items that were in the cockpit lazarettes.
Rick Brass
Sent from my iPad
> On Nov 12, 2014, at 17:51, ahycrace--- via CnC-List
> wro
Guys
I Have A 38' MK II with the same problem I want to replace that hose
but no way am I going in there. Thinking of going to Brewer yard around here
or oldport marine in Newport and hoping I don't have to take out a second
mortgage to pay for it.
Burt
I use the same rigger as Petar and I must say he is top shelf. I had
the mast taken down at a marina near Fall River and He took the whole mast and
all the rigging to his shop to inspect and replace what was needed. Best money
I ever spent knowing that the rig is in good shape.
Jim
The original paperwork on Liberty says nothing about it being a MKII
so I figure it to is a MKI. The hull # is 99 so I think the break off point is
changing from double digits to triple digits. That's my story and I'm sticking
to it !! :-))
...Gary Kolc
Rick
ow the difference I don't feel so bad. Also, it means the
> older boats are worth considering. I'm also reading mixed reports of cored vs
> non-cored hulls. Anyone care to comment on that one?? Mostly I read that they
> are cored all the way down.
>
>
>
> Thanks,
Jim and Steve
My 1976 hull# 99 has old perf papers that call it a mk I. I
have been trying to find out the difference for years. At the Mystic rendezvous
I asked Rob Ball and he didn't know said it might have been a marketing thing.
.Gary Kolc.."Liberty"
84 matches
Mail list logo
