Stus-List 35-3 Bimini question

I am going to try my hand at some canvas work by adding a bimini to my 35-3. I am looking to use a Sailrite kit. Any other 35-3 owners out there who have done this? Did you use a 2-bow frame, or 3 bow? Mounting from rear pulpit or deck? I also want to add a flexible 100 W solar panel on top. Will

Re: Stus-List 35-3

a Belle Aurore C 25 mk1 #225 Washington, NC From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Mazen Aziz via CnC-List Sent: Friday, July 24, 2020 3:15 PM To: cnc-list@cnc-list.com Cc: Mazen Aziz Subject: Stus-List 35-3 Hi all, New 35-3 enterprise owner Here in the Bay

Re: Stus-List 35-3

@cnc-list.com Cc: Mazen Aziz Subject: Stus-List 35-3 Hi all, New 35-3 enterprise owner Here in the Bay Area. Love the boat and want to take your opinions here. Boat has original standing riggings and currently going thru changing halyards and standing riggings. Few questions, 1

Re: Stus-List 35-3

Very appreciate your recommendations Alan and Dennis. Can’t wait to take her sailing. Ian, I’m in oyster point marina for now by the airport till I move her to clippers by you next month. Would you like to go sailing sometime? Mine is getting hull out on Monday for the survey and bottom paint

Re: Stus-List 35-3

Hi Mazen Where in the Bay Area do you keep your boat? I have a C 29-1 which I love. I am based at Paradise Cay near Tiburon. I have done many projects on my boat although I never had rod rigging so never had to worry about that. Feel free to contact me directly for local information etc.

Re: Stus-List 35-3

Welcome to the group Mazen. You'll get a lot of information here. There is also a C group on Facebook: C Sailboat Owners Group. Wire forestay is ok with the new furler. Baby stay can also be wire. Keep the rod rigging for the rest of the boat. If you have any concerns, the rigging can be reheaded.

Re: Stus-List 35-3

OK to change the fore stay to wire when installing a Harken furler. I removed a Hood Seafoil (twin slot rod) from my boat in 1999 and replaced it with a Harken furler and wire forestay. No issues. Re-head the rest of the rod rigging and keep it rod. Rod rigging generally fails at the head.

Stus-List 35-3

Hi all, New 35-3 enterprise owner Here in the Bay Area. Love the boat and want to take your opinions here. Boat has original standing riggings and currently going thru changing halyards and standing riggings. Few questions, 1- planning to change my forestay twinstay rod with wire system harken

Re: Stus-List 35-3 Mast Wedges

I use the Rig-Rite NGA-19 (large rubber) wedges on my 30 MK I and the damned things still fall out. I’m warming up to the idea of a spar-tite plug - but now thanks to Joe I’ve got muffin-top images in my head :) Cheers, Randy Stafford S/V Grenadine C 30 MK I #79 Ken Caryl, CO > On Jun 3,

Re: Stus-List 35-3 Mast Wedges

Rig-Rite has rubber wedges. https://www.rigrite.com/Spars/SparParts/Mast_wedges.php Chuck > On June 3, 2020 at 12:38 PM rick bushie via CnC-List > wrote: > > > I use rubber wedges on my 30-1. I don’t remember where I sourced them but > google is your friend. My mast boot is constructed

Re: Stus-List 35-3 Mast Wedges

I use rubber wedges on my 30-1. I don’t remember where I sourced them but google is your friend. My mast boot is constructed from a tire inner tube and contact cement. Works great. Rick Bushie Anchovy 1971 30-1 ___ Thanks everyone for supporting this

Re: Stus-List 35-3 Mast Wedges

. From: CnC-List On Behalf Of Della Barba, Joe via CnC-List Sent: Wednesday, June 03, 2020 12:11 PM To: cnc-list@cnc-list.com Cc: Della Barba, Joe Subject: Re: Stus-List 35-3 Mast Wedges I think the idea when you set it up is to sand the mast a bit to make it rough and spray mold release

Re: Stus-List 35-3 Mast Wedges

I think the idea when you set it up is to sand the mast a bit to make it rough and spray mold release or coat the collar with Vaseline so it sticks to the mast but not the boat. If I ever redo mine I am going to make a “muffin top” to keep water out better. Joe Della Barba Coquina C 35 MK I

Re: Stus-List 35-3 Mast Wedges

. From: CnC-List On Behalf Of Luke Wolbrink via CnC-List Sent: Wednesday, June 03, 2020 10:57 AM To: cnc-list@cnc-list.com Cc: Luke Wolbrink Subject: Stus-List 35-3 Mast Wedges Hello Fellow C'ers, Things here in Chicago are finally opening up and I'm anticipating being able to re-step my

Re: Stus-List 35-3 Mast Wedges

From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Luke Wolbrink via CnC-List Sent: Wednesday, June 03, 2020 10:57 AM To: cnc-list@cnc-list.com Cc: Luke Wolbrink Subject: Stus-List 35-3 Mast Wedges Hello Fellow C'ers, Things here in Chicago are finally opening up and I'm

Re: Stus-List 35-3 Mast Wedges

I used urethane from Spar-Tight and it works 1,000 times better than wood wedges IMHO. It is a bit of a pain to set up though. Joe Coquina 35 MK I On 6/3/2020 10:57 AM, Luke Wolbrink via CnC-List wrote: Hello Fellow C'ers, Things here in Chicago are finally opening up and I'm anticipating

Stus-List 35-3 Mast Wedges

Hello Fellow C'ers, Things here in Chicago are finally opening up and I'm anticipating being able to re-step my mast for 2020 pretty soon. When I pulled the mast in Fall the wooden wedges at the partners were pretty beat up (probably original 1985) and I hate to continue re-using them. Any

Re: Stus-List 35-3 Asym Conversion

gybe isn’t a big deal. I do have a Seldon bow sprit for sale if you want it. From: CnC-List On Behalf Of Luke Wolbrink via CnC-List Sent: Friday, August 9, 2019 8:01 AM To: Bruno Lachance Cc: Luke Wolbrink ; cnc-list@cnc-list.com Subject: Re: Stus-List 35-3 Asym Conversion I

Re: Stus-List 35-3 Asym Conversion

, August 9, 2019 7:12 AM To: Bruno Lachance Cc: cnc-list@cnc-list.com; PETE SHELQUIST Subject: Re: Stus-List 35-3 Asym Conversion Thanks for the responses. The local phrf will give me a 6s credit if I ditch the pole, which is surprising. I'll look up the mast mfr, I just assumed they were out

Re: Stus-List 35-3 Asym Conversion

. Hope that helps. From: CnC-List mailto:cnc-list-boun...@cnc-list.com>> On Behalf Of Luke Wolbrink via CnC-List Sent: Thursday, August 8, 2019 5:11 PM To: cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com> Cc: Luke Wolbrink mailto:luke.wolbr...@gmail.com>> Subject: Stus-List 35-3

Re: Stus-List 35-3 Asym Conversion

y only Asyms. For the longer >>> distance races I sail I wouldn’t go back to sym. Simple, fast and less >>> crew needed. >>> >>> >>> >>> I don’t use a top down furler so can’t help you there. From those that >>> I know that do, a

Re: Stus-List 35-3 Asym Conversion

From: CnC-List mailto:cnc-list-boun...@cnc-list.com>> On Behalf Of Luke Wolbrink via CnC-List Sent: Thursday, August 8, 2019 5:11 PM To: cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com> Cc: Luke Wolbrink mailto:luke.wolbr...@gmail.com>> Subject: Stus-List 35-3 Asym Conversi

Re: Stus-List 35-3 Asym Conversion

’t use a top down furler so can’t help you there. From those that >> I know that do, a sock has same reliability and a lot cheaper. >> >> >> >> If racing, check with you local rating officials to make sure you >> understand the adjustments that will be applied. >>

Re: Stus-List 35-3 Asym Conversion

understand the adjustments that will be applied. Hope that helps. From: CnC-List mailto:cnc-list-boun...@cnc-list.com>> On Behalf Of Luke Wolbrink via CnC-List Sent: Thursday, August 8, 2019 5:11 PM To: cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com> Cc: Luke Wolbrink mailto:luke.wolbr...@

Re: Stus-List 35-3 Asym Conversion

*On Behalf Of *Luke > Wolbrink via CnC-List > *Sent:* Thursday, August 8, 2019 5:11 PM > *To:* cnc-list@cnc-list.com > *Cc:* Luke Wolbrink > *Subject:* Stus-List 35-3 Asym Conversion > > > > Hello Folks, > > > > I'm considering simplifying things on my 35-3 and c

Re: Stus-List 35-3 Asym Conversion

Hope that helps. From: CnC-List mailto:cnc-list-boun...@cnc-list.com>> On Behalf Of Luke Wolbrink via CnC-List Sent: Thursday, August 8, 2019 5:11 PM To: cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com> Cc: Luke Wolbrink mailto:luke.wolbr...@gmail.com>> Subject: Stus-List 35-

Re: Stus-List 35-3 Asym Conversion

day, August 8, 2019 5:11 PM To: cnc-list@cnc-list.com Cc: Luke Wolbrink Subject: Stus-List 35-3 Asym Conversion Hello Folks, I'm considering simplifying things on my 35-3 and changing to an asymmetrical system. I'm interested in any information from folks here that have done a simi

Re: Stus-List 35-3 Asym Conversion

Try Rig Rite: https://www.rigrite.com/Spars/SparParts/MH_Spinnaker_bails.php They should have something that will fit your boat. All the best, Mike Mike Brannon Virginia Lee 93295 C 36 CB Virginia Beach, VA > On Aug 8,

Stus-List 35-3 Asym Conversion

Hello Folks, I'm considering simplifying things on my 35-3 and changing to an asymmetrical system. I'm interested in any information from folks here that have done a similar conversion: positives, negatives, cautionary tales? One thing I'm concerned about is that my mast does not have a crane,

Re: Stus-List 35-3 Upper (inner?) Genoa Track

via CnC-List > *Sent:* Wednesday, December 12, 2018 12:49 PM > *To:* cnc-list@cnc-list.com > *Cc:* Luke Wolbrink > *Subject:* Stus-List 35-3 Upper (inner?) Genoa Track > > Hello All, > > I recently purchased a new to me 35-3 and an very excited for the coming > spring and

Re: Stus-List 35-3 Upper (inner?) Genoa Track

Cc: Luke Wolbrink Subject: Stus-List 35-3 Upper (inner?) Genoa Track Hello All, I recently purchased a new to me 35-3 and an very excited for the coming spring and am grateful to this board. I did have a question about the 'upper' genoa tracks on the 35-3 that are about 2' long a

Re: Stus-List 35-3 Upper (inner?) Genoa Track

From: Luke Wolbrink Sent: Wednesday, December 12, 2018 7:14:29 PM To: John Conklin Cc: cnc-list@cnc-list.com; PETE SHELQUIST Subject: Re: Stus-List 35-3 Upper (inner?) Genoa Track Yes, that's it. Sounds like it's for eeking out a few more degrees to windward and you can

Re: Stus-List 35-3 Upper (inner?) Genoa Track

Luke - I use the inner track for my light #1. it's a bit of a nuisance since the car is not easily adjustable like the primary jib cars. I still like it and believe it gives us a little more point. to change jib cars to the primary track, either for the same sail or a headsail change, just

Stus-List 35-3 Upper (inner?) Genoa Track

Hello All, I recently purchased a new to me 35-3 and an very excited for the coming spring and am grateful to this board. I did have a question about the 'upper' genoa tracks on the 35-3 that are about 2' long and mounted on the cockpit coamings just aft of the cabin. I assume that these are for

Re: Stus-List 35-3 Bimini

Subject: Stus-List 35-3 Bimini In an attempt to not recreate the wheel, I'm looking for information, pictures, or a source lead on a bimini frame for an '87 35-3. Any help would be greatly appreciated. Brien Sadler S/V TAZ 1987 C 35-3 ___ Thanks

Re: Stus-List 35-3 Bimini

I haven't used these but, I've seen them during some searches https://shop.sailboatowners.com/cat.php?53966 On 8/6/2018 8:14 AM, Brien Sadler via CnC-List wrote: In an attempt to not recreate the wheel, I'm looking for information, pictures, or a source lead on a bimini frame for an '87 35-3.

Stus-List 35-3 Bimini

In an attempt to not recreate the wheel, I'm looking for information, pictures, or a source lead on a bimini frame for an '87 35-3. Any help would be greatly appreciated. Brien Sadler S/V TAZ 1987 C 35-3 ___ Thanks everyone for supporting this list

Stus-List 35 - 3 price reduction

Hello All, Knot Again, my 35-3 which I have lovingly owned since 1993, has been for sale as I am moving to California. I am doing one last price reduction and am now offering, what IMHO is the nicest and best prepared 35-3 available for $35,900.00. Anyone interested in copious info and pix on

Stus-List 35-3 Bulkhead Rot

Hi all, I am looking at a 1984 model 35-3 for sale. Boat looks good overall. Recent keel re bed etc. upon inspection have found the following bothersome issues; the bulkhead that the v birth door is hinged upon shows rot at the bottom as well as the bottom of the diagonal bulkhead separating

Re: Stus-List 35-3

Howard, I hope the next owner gets as much joy from her as you and Skippy have! Joel On Mon, Oct 30, 2017 at 12:59 PM, Howard and Skippy via CnC-List < cnc-list@cnc-list.com> wrote: > My 35-3 is for sale. Here is a link to the ad: > > https://www.popyachts.com/cruising-sailboats-for-sale/c- >

Stus-List 35-3

My 35-3 is for sale. Here is a link to the ad: https://www.popyachts.com/cruising-sailboats-for-sale/c-c-yachts-35-mk-iii-in-perth-amboy-new-jersey-135392 ___ The bills have started coming in for the year 2018 and have gone up again. October will

Re: Stus-List 35 - 3; hauling costs?

: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of bushmark4--- via CnC-List Sent: Saturday, August 5, 2017 6:03 AM To: cnc-list@cnc-list.com Cc: bushma...@aol.com Subject: Re: Stus-List 35 - 3; hauliiing costs? I agree its not a deal breaker...I had my 37 trucked from Newburyport

Re: Stus-List 35 - 3

1982 C 34 Noank, CT -Original Message- From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Leslie Paal via CnC-List Sent: Saturday, August 05, 2017 1:32 AM To: cnc-list@cnc-list.com Cc: Leslie Paal Subject: Re: Stus-List 35 - 3 I have shipped a C from Marblehead to San Diego

Re: Stus-List 35 - 3; hauliiing costs?

40220-1462 502-584-7255 -Original Message- From: Leslie Paal via CnC-List <cnc-list@cnc-list.com> To: cnc-list <cnc-list@cnc-list.com> Cc: Leslie Paal <lpaalc...@yahoo.com> Sent: Sat, Aug 5, 2017 1:37 am Subject: Re: Stus-List 35 - 3 I have shipped a C from Marbl

Re: Stus-List 35 - 3

wrote: Subject: Stus-List 35 - 3 To: cnc-list@cnc-list.com Cc: "Howard and Skippy" <emp...@optonline.net> Date: Tuesday, August 1, 2017, 6:20 PM Hello All, I have owned Knot Again, a 35-3 for about 25 years. I have raced and cruised with her extensively. She is one of

Re: Stus-List 35 - 3

Howard Kindly send me your photos and details. We received a very good offer on our C 39 TM (owned since 1976) today and are looking to downsize. The 35 II maybe a good choice for us. Thank you Best regards, Jack Fitzgerald Savannah, GA 31410 USA Tel. no: 912 898.1069 - Fax no: 912 898.9458 -

Stus-List 35 - 3

Hello All, I have owned Knot Again, a 35-3 for about 25 years. I have raced and cruised with her extensively. She is one of the winning-est boats in the Middle Atlantic states. 18 trophies in the Around Long Island Regatta, multiple club championships. Multiple NJ offshore racing conference

Stus-List 35-3 racing sails

to Bob Curtis: If you are willing to separate the set, what do you wish for the genoa and what are its specs. Thanks Howard Paul Knot Again 35 - 3 ___ This list is supported by the generous donations of our members. If you wish to make a

Re: Stus-List 35-3 emergency helm flex NOW C 35 MK I rudder bearing

-list.com Cc: Neil Gallagher Subject: Re: Stus-List 35-3 emergency helm flex Joe, Does that upper bearing come out without removing the rudder stock? I'm getting some of the same movement at the top. Neil Gallagher Weatherly, 35-1 Glen Cove, NY On 9/26/2016 9:04 AM, Della Barba, Joe via CnC-List

Re: Stus-List 35-3 emergency helm flex

-List 35-3 emergency helm flex Greetings, I recently purchased my first C, a 1984 35-3 here in Southern California. As I was motoring from marina del Rey to her new home port I noticed the emergency tiller stub flexing slightly as we took swell to the beam. I am wondering if this is normal

Re: Stus-List 35-3 emergency helm flex

Coquina > C 35 MK I > > > -Original Message- > From: CnC-List [mailto:cnc-list-boun...@cnc-list.com <javascript:;>] On > Behalf Of Kris O'Brien via CnC-List > Sent: Sunday, September 25, 2016 21:08 > To: cnc-list@cnc-list.com <javascript:;> > Cc: K

Re: Stus-List 35-3 emergency helm flex

21:08 To: cnc-list@cnc-list.com Cc: Kris O'Brien Subject: Stus-List 35-3 emergency helm flex Greetings, I recently purchased my first C, a 1984 35-3 here in Southern California. As I was motoring from marina del Rey to her new home port I noticed the emergency tiller stub flexing slightly as we

Stus-List 35-3 emergency helm flex

Greetings, I recently purchased my first C, a 1984 35-3 here in Southern California. As I was motoring from marina del Rey to her new home port I noticed the emergency tiller stub flexing slightly as we took swell to the beam. I am wondering if this is normal and if not the potential causes and

Re: Stus-List 35-3 Spinnaker Dimensions

SLE: 45.95 SLU: 45.95 SGF: 24.8 SGM: 24.8 SPL: 13.6 Alan Bergen 35 Mk III Thirsty Rose City YC Portland, OR On Thu, Jun 2, 2016 at 1:37 PM, Sam Wheeler via CnC-List < cnc-list@cnc-list.com> wrote: > Hi all, > > Does anyone know what dimensions the spinnaker should be on a C 35 mk > III?

Re: Stus-List 35-3 Spinnaker Dimensions

From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Sam Wheeler via CnC-List Sent: Thursday, June 2, 2016 4:38 PM To: cnc-list <cnc-list@cnc-list.com> Cc: Sam Wheeler <samwheeler.s...@gmail.com> Subject: Stus-List 35-3 Spinnaker Dimensions Hi all, Does anyo

Stus-List 35-3 Spinnaker Dimensions

Hi all, Does anyone know what dimensions the spinnaker should be on a C 35 mk III? I'm thinking about picking up a secondhand spinnaker for mine and don't need to find a perfect match, but would like to get something in the ballpark of what the boat was designed for. It's a liveaboard so this

Re: Stus-List 35-3 Rudder post sleeve

: Thursday, June 02, 2016 02:28 Subject: Re: Stus-List 35-3 Rudder post sleeve It's hard to imagine having to replace the rudder post sleeve, and needing a new collar. Sometimes turning the grease cup (if it has any grease left in it) will make the steering easier. If the cup is already

Re: Stus-List 35-3 Rudder post sleeve

Make sure that you check the alignment of the upper bearing connected to the cockpit floor before replacing anything! Sometimes this bearing shifts laterally and make the steering appear to be stiff. It is an easy correction to make. Bob Bob Boyer s/v Rainy Days C Landfall 38 (Hull # 230)

Re: Stus-List 35-3 Rudder post sleeve

It's hard to imagine having to replace the rudder post sleeve, and needing a new collar. Sometimes turning the grease cup (if it has any grease left in it) will make the steering easier. If the cup is already screwed in all the way, remove it, fill it with grease and screw it back on until

Stus-List 35-3 Rudder post sleeve

Indigo, a 35-3 in central NJ has had a tight steering wheel. Inspection revealed the need for a new rudder post sleeve and collar that holds the rudder in place. Does any one know of where replacements can be found for this. The local yard has said it may require a custom made piece. Of question

Re: Stus-List 35-3 chain plate removal

ead. >>> >>> Jake >>> >>> Jake Brodersen >>> C 35 Mk-III "Midnight Mistress" >>> Hampton VA >>> >>> >>> >>> >>> -Original Message- >>> From: CnC-List [mailto:cnc-list-

Re: Stus-List 35-3 chain plate removal

4:09 > To: Stu <cnc-list@cnc-list.com> > Cc: JP Mail <jon.peterpr...@gmail.com> > Subject: Stus-List 35-3 chainplate removal > > Looking for any experiences with repairing/replacing a chainplate or 2 on a > 35-3 I'm showing a hairline crack about 3/4" on the weld tha

Re: Stus-List 35-3 chain plate removal

eterpr...@gmail.com> Subject: Stus-List 35-3 chainplate removal Looking for any experiences with repairing/replacing a chainplate or 2 on a 35-3 I'm showing a hairline crack about 3/4" on the weld that attaches the flange to the chainplate at deck level. Replace them both? Remove

Stus-List 35-3 chainplate removal

Looking for any experiences with repairing/replacing a chainplate or 2 on a 35-3 I'm showing a hairline crack about 3/4" on the weld that attaches the flange to the chainplate at deck level. Replace them both? Remove, grind, reweld and replace? Is it fairly straight forward job of removing the

Re: Stus-List 35-3 sternn boarding ladder

st@cnc-list.com <mailto:cnc-list@cnc-list.com> > Cc: Howard and Skippy <emp...@optonline.net <mailto:emp...@optonline.net>> > Subject: Stus-List 35-3 sternn boarding ladder > > Hello All, > Anyone have a lead on a stern boarding ladder for a 35-3? Mine was bent b

Re: Stus-List 35-3 stern boarding ladder

list.com> Cc: "Jake Brodersen" <captain_j...@cox.net> Subject: Re: Stus-List 35-3 stern boarding ladder Howard, The stern ladder on the 35-3 isn't rocket science. It's a very simple design that any competent metal worker should be able to copy or replicate. Jake Jake Brod

Re: Stus-List 35-3 stern boarding ladder

oun...@cnc-list.com] On Behalf Of Howard and Skippy via CnC-List Sent: Wednesday, February 17, 2016 12:12 To: cnc-list@cnc-list.com Cc: Howard and Skippy <emp...@optonline.net> Subject: Stus-List 35-3 sternn boarding ladder Hello All, Anyone have a lead on a stern boarding ladder for a 35-3

Re: Stus-List 35-3 sternn boarding ladder

the SS tubing was kind of hard on bare feet. Danny -- Original Message -- From: Howard and Skippy via CnC-List <cnc-list@cnc-list.com> To: cnc-list@cnc-list.com Cc: Howard and Skippy <emp...@optonline.net> Subject: Stus-List 35-3 sternn boarding ladder Date: Wed, 17 Feb 2

Stus-List 35-3 sternn boarding ladder

Hello All, Anyone have a lead on a stern boarding ladder for a 35-3? Mine was bent by a sprit from a 109 in a race:-( . Howard Paul, Skipper of Knot Again ___ Email address: CnC-List@cnc-list.com To change your list preferences, including

Stus-List 35-3 keel centerboard

I was visiting my club on the weekend (Barrachois Harbour Yacht Club, Tatamagouche, NS) and there is now a 35-3 CB/Keel located there which draws 4 ft board up. We have a very shallow channel (2.3 feet at moon low tide) so anything over 5 foot has been a challenge and a CC99 was really pushing

Re: Stus-List 35-3 keel centerboard

Mike, Don't know if Chef Dave is still on the list, but he has one on the chesapeake. It rates 6 or 9 seconds slower than the keel version. Steve Sharkey and others have the 37 CB. I'd make sure the wire pennant is not corroded, but otherwise I don't see any negatives. Joel On Mon, Jun 22,

Re: Stus-List 35-3 polars

a 135 and a spinnaker...seems odd, i more expected a 100% jib for polars... where with regards to angle does the spinnaker come into play? Are those apparent wind angles or true wind angles...looks like they are apparent and if so the important numbers, like for apparent wind angle 25-40 suggest

Stus-List 35-3 polars

Good day. Attached here are the polars for a CC35-3 (Howard's in particular, but should be generic...). The polars are for a 135% jib and a spinnaker. This is in the format Raymarine's Lighthouse software will use, the format is wind speed along the top, angle on the side. 8

Re: Stus-List 35-3 polars

Hi Jim What is the pedigree of that chart? It looks hand drawn. Any idea what jib it assumes, or what wind speed one changes jib size? The spinnaker after 120 true is clear. Graham Collins Secret Plans CC 35-III #11 On 2015-05-08 1:17 AM, Jim Watts via CnC-List wrote: Do they look like

Re: Stus-List 35-3 polars

I really can't remember where I got that. I thought I had a printed guide that went with it, but I can't find it now. I'll have a look in the archives and see if I backed it up at some point. Jim Watts Paradigm Shift CC 35 Mk III Victoria, BC On 11 May 2015 at 14:40, Graham Collins via CnC-List

Re: Stus-List 35-3 polars

, May 08, 2015 12:18 AM To: 1 CnC List Cc: Jim Watts Subject: Re: Stus-List 35-3 polars Do they look like these? https://lh3.googleusercontent.com/-UbnwcyZAcG4/VD8e9uiQxxI/CkM/xteY0mUYmXM/w1037-h813-no/C%2526C%2B35%2BMk%2BIII%2Bpolar.jpg Jim Watts Paradigm Shift CC 35 Mk III Victoria

Re: Stus-List 35-3 polars

I can assist with formatting. I'm interested I using them in an iPhone app. Thanks, Tim On May 7, 2015, at 9:50 PM, Howard and Skippy via CnC-List cnc-list@cnc-list.com wrote: I have the polars for the 35-3 and also have them set up for use with the Nexus NX2 system, not Raymarine. I

Re: Stus-List 35-3 polars

Could you add me to that list?  I often race with a friend who has the 35-3.RonWild CheriCC 30-1STL From: Kim Brown via CnC-List cnc-list@cnc-list.com To: cnc-list@cnc-list.com Cc: Kim Brown kimcbr...@comcast.net Sent: Friday, May 8, 2015 6:26 AM Subject: Stus-List 35-3 polars

Re: Stus-List 35-3 polars

Jake,please add me to the list ,also. Thanks Lee Christiansen CC 35-3 Maggielee -Original Message- From: Kim Brown via CnC-List cnc-list@cnc-list.com To: cnc-list cnc-list@cnc-list.com Cc: Kim Brown kimcbr...@comcast.net Sent: Fri, May 8, 2015 7:26 am Subject: Stus-List 35-3 polars Jake

Stus-List 35-3 polars

Jake, add me to the list of folks interested in 35-3 polars in any format- hard copy is fine. Kim Brown TrustMe!!! 35-3 2015-05-07 8:25 PM, Jake Brodersen via CnC-List wrote: I have the hard copy from US sailing, but not sure how to translate it into the appropriate format.

Re: Stus-List 35-3 polars

Jake, Me too please. Dave CC 35-3 Saltaire - Original Message - From: Ronald B. Frerker via CnC-List cnc-list@cnc-list.com To: cnc-list@cnc-list.com Cc: Ronald B. Frerker rbfrer...@yahoo.com Sent: Friday, May 8, 2015 11:35:40 AM Subject: Re: Stus-List 35-3 polars Could you

Stus-List 35-3 polars

I have the polars for the 35-3 and also have them set up for use with the Nexus NX2 system, not Raymarine. I will be glad to share them if someone can do the formatting. Howard Paul, Skipper of Knot Again ___ Email address: CnC-List@cnc-list.com To

Re: Stus-List 35-3 polars

Do they look like these? https://lh3.googleusercontent.com/-UbnwcyZAcG4/VD8e9uiQxxI/CkM/xteY0mUYmXM/w1037-h813-no/C%2526C%2B35%2BMk%2BIII%2Bpolar.jpg Jim Watts Paradigm Shift CC 35 Mk III Victoria, BC On 7 May 2015 at 18:50, Howard and Skippy via CnC-List cnc-list@cnc-list.com wrote:

Re: Stus-List 35-3 for sale in St Mary's City, MD

Glad to hear that about the 35 mk II as I am buying one. She needs some work but we are planning on racing her in 2016.___ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at:

Re: Stus-List 35-3 for sale in St Mary's City, MD

The hidden issue in my post was the 35-3 had its centerboard cranked up for 85% of the first race. That's one reason that most handicapping authorities do not include distance races in their evaluations of different boats. Dennis C. Sent from my iPhone On Mar 14, 2015, at 3:22 PM, robert

Re: Stus-List 35-3 for sale in St Mary's City, MD

Dennis: Interesting observations on different boats and their performance on different points of sail. The listers should pay close attention to these posts before they go 'hook up' on a fellow CC sailor. Some years back, we were campaigning a 1985 CC 33 MKII with beautiful new sails. At

Re: Stus-List 35-3 for sale in St Mary's City, MD

the 35 mkII has a LWL exactly 4 ft longer than the 33 mkII. Here is the answer in my opinion, as long as there is enough wind to push the heavier 35. in my expérience, everything else being equal, the 33 mkII or 35 mkIII do point higher. don't know about the CB... The mk II has a surprisingly

Re: Stus-List 35-3 for sale in St Mary's City, MD

Dennis, I'd support those observations; I have found that we tend to slam more than other boats in short steep chop. In 10-14 knots / flatter water I think the upwind results may be different. Tim Mojito CC 35-3 Branford, CT On Sat, Mar 14, 2015 at 12:35 PM, Dennis C. via CnC-List

Stus-List 35-3 for sale in St Mary's City, MD

Hi, anyone on the list familiar with this particular boat? More generally, any specific concerns with the centerboard version of these boats? How do they point? Thanks, Dan ___ Email address: CnC-List@cnc-list.com To change your list

Re: Stus-List 35-3 for sale in St Mary's City, MD

-list.com Subject: Stus-List 35-3 for sale in St Mary's City, MD Hi, anyone on the list familiar with this particular boat? More generally, any specific concerns with the centerboard version of these boats? How do they point? Thanks, Dan ___ Email

Re: Stus-List 35-3 for sale in St Mary's City, MD

The CB version is rated 6 seconds slower for Chesapeake PHRF FWIW. I'm not sure why, it should be faster off the wind. My only concern specific to the CB vesrion would be to see if the CB pennant has been replaced. Joel 35/3 (keel version) Annapolis On Saturday, March 14, 2015, Josh Muckley

Re: Stus-List 35-3 for sale in St Mary's City, MD

I raced my 35-1 against a 35-3 CB in a 100 mile distance race two years running. First year was a 15 mile beat followed by 85 miles chute carry and broad reach. The 35-3 beat us by about 10 minutes corrected. They hung with us the entire race. The second year was 15 miles close reaching and

Re: Stus-List 35-3 for sale in St Mary's City, MD

Where are you from Dan? St. Mary's City is about 45-60min from me if you need local eyes on the boat. Josh Muckley S/V Sea Hawk 1989 CC 37+ Solomons, MD On Mar 14, 2015 10:14 AM, Berry Fox via CnC-List cnc-list@cnc-list.com wrote: Hi, anyone on the list familiar with this particular boat?

Stus-List 35-3 headsails

If anyone has old but serviceable laminate headsails they are looking to unload, please let me know. My #2 is about to become tote bags. Also, my 1.5 ounce chute is the same size as my light air chutes. If it is windy enough to need the 1.5 oz. chute it is way too big to handle. Has anyone had

Re: Stus-List 35-3 Ice Box Insulation

] On Behalf Of Jake Brodersen Sent: February 5, 2014 8:49 AM To: cnc-list@cnc-list.com Subject: Stus-List 35-3 Ice Box Insulation I know several of you are curious about adding insulation to the ice box. On my 35-3 I added rigid foam insulation (with a metallic coating on one side) to the inside

Re: Stus-List 35-3 Ice Box Insulation

I glued two inch closed cell foam to the under side of the top of the ice box. I also drilled a hole through the wall just aft of the stove, and injected foam into the void. The can comes with a long tube which I inserted as far as it would go toward the port side of the boat, and practically

Re: Stus-List 35-3 Ice Box Insulation

Ice block melt test. I would encourage anyone considering this exercise to read Don Casey's book This Old Boat. He goes into detail about ice box insulation, the best way to do it, how not to do it and how to quantify what difference you might have made. Steve Suhana, CC 32 Toronto On Wed,

Stus-List 35/3 MaxProp

All, The manual form my 2 blade max prop indicates that the pitch was reduced from 16 to 14 to 12 degrees over the years (last changed in 1997). I'm about to send mine in for service (hopefully not for the first time since 1997), and was wondering if 12 degrees sounds right. I should have a

Re: Stus-List 35/3 MaxProp

If your engine is able to just make maximum rated revs when you are underway with the throttle wide open, you are correctly pitched. If the revs are higher by 100 or so, you're under pitched, and if lower, the prop is over pitched. Check your manual for the rated RPM. Rich On Jan 12, 2014,

Re: Stus-List 35/3 MaxProp

That will depend on your engine, tranny gear ratio and the prop diameter. Mine is 17 x 10 (I think, my documents are on the boat). However, a pitch of 10 is equivalent to about 18° of blade angle... Jim Watts Paradigm Shift CC 35 Mk III Victoria, BC On 12 January 2014 08:42, Rich Knowles

  1   2   3   >