[Cooker] [Bug 5099] [kernel] The obsolete module DC2XX is loaded when connecting Kodak digital camera
http://qa.mandrakesoft.com/show_bug.cgi?id=5099 --- Additional Comments From [EMAIL PROTECTED] 2003-11-11 00:24 --- It's fixed in the latest tmb and mm kernels... Regards Thomas -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: See the URL. If one connects a digital camera from Kodak, the DC2XX kernel module is loaded and this blocks the access via GPhoto2. One has always to rmmod the module manually to be able to access the camera and newbies do not know this and think their camera is not supported. The user who reported the problem in the MandrakeClub probably uses Mandrake 9.1, but it is possible that the bug still persists in 9.2. I cannot test as I do not have a Kodak camera and the problem does not appear with my Olympus C-3000Z and Canon Digital IXUS 400. If the bug is already fixed, simply mark it as fixed, if another package is responsable please change it.
[Cooker] [Bug 6084] [acpi] ACPI block new hardware search in boot process
http://qa.mandrakesoft.com/show_bug.cgi?id=6084 [EMAIL PROTECTED] changed: What|Removed |Added Status|UNCONFIRMED |RESOLVED Resolution||FIXED --- Additional Comments From [EMAIL PROTECTED] 2003-10-25 08:50 --- also the soundcard is working good. [sgozzi] wrote: --- Additional Comments From [EMAIL PROTECTED] 2003-10-25 09:00 --- also the soundcard is working good. [sgozzi] wrote: --- Additional Comments From [EMAIL PROTECTED] 2003-10-25 09:10 --- also the soundcard is working good. [sgozzi] wrote: --- Additional Comments From [EMAIL PROTECTED] 2003-10-25 09:20 --- also the soundcard is working good. [sgozzi] wrote: --- Additional Comments From [EMAIL PROTECTED] 2003-10-25 09:30 --- also the soundcard is working good. [sgozzi] wrote: --- Additional Comments From [EMAIL PROTECTED] 2003-10-25 09:40 --- also the soundcard is working good. [sgozzi] wrote: --- Additional Comments From [EMAIL PROTECTED] 2003-10-25 09:50 --- also the soundcard is working good. [sgozzi] wrote: --- Additional Comments From [EMAIL PROTECTED] 2003-10-25 10:00 --- also the soundcard is working good. [sgozzi] wrote: --- Additional Comments From [EMAIL PROTECTED] 2003-10-25 10:10 --- also the soundcard is working good. [sgozzi] wrote: --- Additional Comments From [EMAIL PROTECTED] 2003-10-25 10:20 --- also the soundcard is working good. [sgozzi] wrote: --- Additional Comments From [EMAIL PROTECTED] 2003-10-25 10:30 --- also the soundcard is working good. [sgozzi] wrote: --- Additional Comments From [EMAIL PROTECTED] 2003-10-25 10:40 --- also the soundcard is working good. [sgozzi] wrote: --- Additional Comments From [EMAIL PROTECTED] 2003-10-25 10:50 --- also the soundcard is working good. [sgozzi] wrote: --- Additional Comments From [EMAIL PROTECTED] 2003-10-25 11:00 --- also the soundcard is working good. [sgozzi] wrote: --- Additional Comments From [EMAIL PROTECTED] 2003-10-25 11:10 --- also the soundcard is working good. [sgozzi] wrote: --- Additional Comments From [EMAIL PROTECTED] 2003-10-25 11:20 --- also the soundcard is working good. [sgozzi] wrote: --- Additional Comments From [EMAIL PROTECTED] 2003-10-25 11:30 --- also the soundcard is working good. [sgozzi] wrote: --- Additional Comments From [EMAIL PROTECTED] 2003-10-25 11:40 --- also the soundcard is working good. [sgozzi] wrote: --- Additional Comments From [EMAIL PROTECTED] 2003-10-25 11:50 --- also the soundcard is working good. [sgozzi] wrote: --- Additional Comments From [EMAIL PROTECTED] 2003-10-25 12:00 --- also the soundcard is working good. [sgozzi] wrote: --- Additional Comments From [EMAIL PROTECTED] 2003-10-25 12:10 --- also the soundcard is working good. [sgozzi] wrote: --- Additional Comments From [EMAIL PROTECTED] 2003-10-25 12:20 --- also the soundcard is working good. [sgozzi] wrote: --- Additional Comments From [EMAIL PROTECTED] 2003-10-25 12:30 --- also the soundcard is working good. [sgozzi] wrote: --- Additional Comments From [EMAIL PROTECTED] 2003-10-25 12:40 --- also the soundcard is working good. [sgozzi] wrote: --- Additional Comments From [EMAIL PROTECTED] 2003-10-25 12:50 --- also the soundcard is working good. [sgozzi] wrote: --- Additional Comments From [EMAIL PROTECTED] 2003-10-25 13:00 --- also the soundcard is working good. [sgozzi] wrote: --- Additional Comments From [EMAIL PROTECTED] 2003-10-25 13:10 --- also the soundcard is working good. [sgozzi] wrote: --- Additional Comments From [EMAIL PROTECTED] 2003-10-25 13:20 --- also the soundcard is working good. [sgozzi] wrote: --- Additional Comments From [EMAIL PROTECTED] 2003-10-25 13:30 --- also the soundcard is working good. [sgozzi] wrote: --- Additional Comments From [EMAIL PROTECTED] 2003-10-25 13:40 --- also the soundcard is working good. [sgozzi] wrote: --- Additional Comments From [EMAIL PROTECTED] 2003-10-25 13:50 --- also the soundcard is working good. [sgozzi] wrote: --- Additional Comments From [EMAIL PROTECTED] 2003-10-25 14:00 --- also the soundcard is working good. [sgozzi] wrote: --- Additional Comments From [EMAIL PROTECTED] 2003-10-25 14:10 --- also the soundcard is working good. [sgozzi] wrote: --- Additional Comments From [EMAIL PROTECTED] 2003-10-25 14:20 --- also the soundcard is working good. [sgozzi] wrote: --- Additional Comments From [EMAIL PROTECTED] 2003-10-25 14:30 --- also the soundcard is working good. [sgozzi] wrote: --- Additional Comments From [EMAIL PROTECTED]
[Cooker] [Bug 5326] [kernel] kernel fails to load usb
http://qa.mandrakesoft.com/show_bug.cgi?id=5326 --- Additional Comments From [EMAIL PROTECTED] 2003-15-10 21:32 --- Could you try my kernel-tmb-2.4.22.12.1mdk from contribs... Does it work for you? Regards Thomas PS. about the buggy OOo RC4 ... if IRC there are only two minor patches that got added before RC5 / Final, so it shouldn't be a problem ;-) -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: On my acer aspire 1700+ with MDK 9.2rc1 the usb ports don´t work. I had this problem with MDK 9.1 too.lsusb returns a nice 0x0 even with my webcam and speedtouch modem plugged in. Adding pci usb ports has the same result. I know these ports are from VIA,and they work perfectly with suse live cd 8.2 (That uses kernel 2.4.20). I think it could be a bus system problem, as in MDK 9.1 sound did't work even if it installed and loaded the drivers, and this works with the suse live cd too, I´m installing KDE and will report on sound as soon as I can. Please try and fix this, without usb I loose my modem, mywebcam, my printer and my scanner. I can send more info on the chips, just let me know how to get it (Cat something in proc, run a script,whatever)
[Cooker] [Bug 5326] [kernel] kernel fails to load usb
http://qa.mandrakesoft.com/show_bug.cgi?id=5326 --- Additional Comments From [EMAIL PROTECTED] 2003-15-10 22:37 --- Thanks for the info... Here is a few tests... try to remove 'acpi=ht' from the lilo append line, rerun lilo and reboot add 'nolapic' to the lilo append line, rerun lilo and reboot add 'noapic' to the lilo append line, rerun lilo and reboot and tell me if any of them works... and no need to post another dmesg outpout if the errors are the same... and finally... what's the output of 'lspcidrake -v' ? -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: On my acer aspire 1700+ with MDK 9.2rc1 the usb ports don´t work. I had this problem with MDK 9.1 too.lsusb returns a nice 0x0 even with my webcam and speedtouch modem plugged in. Adding pci usb ports has the same result. I know these ports are from VIA,and they work perfectly with suse live cd 8.2 (That uses kernel 2.4.20). I think it could be a bus system problem, as in MDK 9.1 sound did't work even if it installed and loaded the drivers, and this works with the suse live cd too, I´m installing KDE and will report on sound as soon as I can. Please try and fix this, without usb I loose my modem, mywebcam, my printer and my scanner. I can send more info on the chips, just let me know how to get it (Cat something in proc, run a script,whatever)
[Cooker] [Bug 5326] [kernel] kernel fails to load usb
http://qa.mandrakesoft.com/show_bug.cgi?id=5326 --- Additional Comments From [EMAIL PROTECTED] 2003-15-10 23:31 --- No need to try the other ones ;-) It's to _way_ to late for default kernel that ships with 9.2, as the isos are already sent, and probably half way through the manufacturing process my now... But Juan is working on an Update kernel, that will be in updates when it's considered ready enough... But of course you have the choice of running my kernels for now ;-), as they are in contribs... So this bug is theoretically fixed, but I won't close it until it works with the main mdk kernels... -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: On my acer aspire 1700+ with MDK 9.2rc1 the usb ports don´t work. I had this problem with MDK 9.1 too.lsusb returns a nice 0x0 even with my webcam and speedtouch modem plugged in. Adding pci usb ports has the same result. I know these ports are from VIA,and they work perfectly with suse live cd 8.2 (That uses kernel 2.4.20). I think it could be a bus system problem, as in MDK 9.1 sound did't work even if it installed and loaded the drivers, and this works with the suse live cd too, I´m installing KDE and will report on sound as soon as I can. Please try and fix this, without usb I loose my modem, mywebcam, my printer and my scanner. I can send more info on the chips, just let me know how to get it (Cat something in proc, run a script,whatever)
[Cooker] [Bug 5821] [kernel] kernel 2.4.22-9mdk-i686-up-4GB does not boot w/ACPI enabled
http://qa.mandrakesoft.com/show_bug.cgi?id=5821 --- Additional Comments From [EMAIL PROTECTED] 2003-13-10 13:47 --- Just out of curiosity, does my kermel-tmb-2.4.22.12.tmb.1mdk work for you? it has the newest acpi available (2003-10-02)... Regards Thomas -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: New cooker kernel freezes when ACPI is enabled. Hardware is HP omnibook 4500XE.
[Cooker] [Bug 5821] [kernel] kernel 2.4.22-9mdk-i686-up-4GB does not boot w/ACPI enabled
http://qa.mandrakesoft.com/show_bug.cgi?id=5821 --- Additional Comments From [EMAIL PROTECTED] 2003-13-10 15:53 --- OK, thanks for testing... I'll blacklist it in my next kernel... -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: New cooker kernel freezes when ACPI is enabled. Hardware is HP omnibook 4500XE.
[Cooker] [Bug 5326] [kernel] kernel fails to load usb
http://qa.mandrakesoft.com/show_bug.cgi?id=5326 --- Additional Comments From [EMAIL PROTECTED] 2003-11-10 23:31 --- The only reason the speedtouch module in the kernel is disabled, is because we also have a standalone rpm that the installer uses... So to not duplicate the drivers, the easiest fix was done..., by only disabling it in the kernel... othervise it would have required changes to the installer, and it was way to late for that... -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: On my acer aspire 1700+ with MDK 9.2rc1 the usb ports don´t work. I had this problem with MDK 9.1 too.lsusb returns a nice 0x0 even with my webcam and speedtouch modem plugged in. Adding pci usb ports has the same result. I know these ports are from VIA,and they work perfectly with suse live cd 8.2 (That uses kernel 2.4.20). I think it could be a bus system problem, as in MDK 9.1 sound did't work even if it installed and loaded the drivers, and this works with the suse live cd too, I´m installing KDE and will report on sound as soon as I can. Please try and fix this, without usb I loose my modem, mywebcam, my printer and my scanner. I can send more info on the chips, just let me know how to get it (Cat something in proc, run a script,whatever)
[Cooker] [Bug 5377] [Installation] vmlinuz/initrd symlinks in /boot points to the wrong kernel...
http://qa.mandrakesoft.com/show_bug.cgi?id=5377 [EMAIL PROTECTED] changed: What|Removed |Added Component|program |Installation Product|bootloader-utils|Installation Version|1.6-3mdk|1.847 --- Additional Comments From [EMAIL PROTECTED] 2003-30-09 23:52 --- I have just finished a new testinstall with a fully synced Cooker, that uses DrakX v. 1.847 and this problem still exists... and this bug does _not_ have anything to do with bootloader-utils, since if I install the 2.6 kernel using rpm the symlinks does not change... so afaik it's DrakX / drakboot that is messing up ... -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: When installing standard kernel-2.4.22.5mdk-1-1mdk from main and kernel-2.6.0-0.test4.3mdk-1-1mdk from contribs during install the initrd.img and vmlinuz symlinks in /boot points to the 2.6 kernel: lrwxrwxrwx 1 root root 29 syys 8 2003 initrd.img -initrd-2.6.0-0.test4.3mdk.img lrwxrwxrwx 1 root root 26 syys 8 2003 vmlinuz -vmlinuz-2.6.0-0.test4.3mdk This is _bad_ since the lilo options linux, linux-nonfb and failsafe all use: image=/boot/vmlinuz initrd=/boot/initrd.img as their kernel choice... This will lead to users trying to fix their broken systems most likely ending up with more problems, since without they knowing it, they will be booting into an 2.6 test-kernel :-( And this is definately an installer bug since all contrib kernels are using -L parameter with /sbin/installkernel, and installing a 2.6 kernel _after_ a newly installed system has been rebooted into, won't trigger this behaviour Regards Thomas
[Cooker] [Bug 5385] [Installation] Decline button don't work in text-mode
http://qa.mandrakesoft.com/show_bug.cgi?id=5385 [EMAIL PROTECTED] changed: What|Removed |Added Version|1.830 |1.847 --- Additional Comments From [EMAIL PROTECTED] 2003-30-09 23:53 --- This one is still valid, as I tested it today... -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: When you get to the point where you have to accept/decline the MDK licence, if you choose decline... nothing happends... AFAIK the installer should abort and shutdown or reboot the computer... Thomas
[Cooker] [Bug 5386] [Installation] text-mode choosing security-level window needs scrollable help window
http://qa.mandrakesoft.com/show_bug.cgi?id=5386 [EMAIL PROTECTED] changed: What|Removed |Added Status|NEW |RESOLVED Resolution||FIXED --- Additional Comments From [EMAIL PROTECTED] 2003-30-09 23:55 --- This problem does not exist anymore ... -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: When you get to the point where you have to choose default security level, the help window does not show the help text for all options, since there are more text in the helpfile than fits in the present window... AFAIK the helpwindow needs the same vertical scrollbars as used in the mdk licence window... Thomas
[Cooker] [Bug 5387] [rpmdrake] text-mode package selection broken (or uggly...)
http://qa.mandrakesoft.com/show_bug.cgi?id=5387 [EMAIL PROTECTED] changed: What|Removed |Added Component|Installation|rpmdrake Product|Installation|rpmdrake Version|1.830 |2.1-35mdk --- Additional Comments From [EMAIL PROTECTED] 2003-30-09 23:59 --- This one is still valid as of today with DrakX 1.847 -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: When you geet to the point where you choose packages, every package group header line has many underscores after them... ex: Development [ ] package 1 [ ] package 2 ... Servers [ ] package 1 [ ] package 2 ... wich makes the uggly to look at and read... Thomas
[Cooker] [Bug 5388] [drakxtools] text-mode partitioning wont let you change fs type after a partition is created..
http://qa.mandrakesoft.com/show_bug.cgi?id=5388 [EMAIL PROTECTED] changed: What|Removed |Added Component|Installation|diskdrake Product|Installation|drakxtools Summary|tex-mode partitioning wont |text-mode partitioning wont |let you change fs type after|let you change fs type after |a partition is created..|a partition is created.. Version|1.830 |9.2-16mdk --- Additional Comments From [EMAIL PROTECTED] 2003-01-10 00:12 --- This is now tested with DrakX 1.847: If you try to change that line by editing the textline (ex: ext3-ReiserFS), the installer will later complain about an unknown filesystem... This part now kind of works, but you have to know exactly how the fs has to be typed: ex: 'Journalised FS: ReiserFS' is OK, 'Journalised FS: reiserfs' will give you a fs/partition type of 0x0, wich breaks the install 'Journalised FS: XFS' is OK, 'Journalised FS: xfs' will give you a fs/partition type of 0x0, wich breaks the install Another bug that showed up is that if you try to create a new partition, the window that shows available filesystems is _way_ too wide, breaking the install window... probably due to theese filesystem descriptions: Digital Research... IBM ThinkPad... Linux/MINIX... OS/2 (1.0-1.3)... SpeedStor 1024... And last, but not least, a Request... When you choose a partition size, and you request a larger size than the available unpartitioned space on the hdd, diskdrake should correct the request to largest possible... -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: When you get to the point where you have to partition the harddisks, you can only choose fs type when you create the partition... If you try to change fs type on an existing partition, you are presented with an dialog with an editable text string: Journalised FS: ext3 If you try to change that line by editing the textline (ex: ext3-ReiserFS), the installer will later complain about an unknown filesystem... AFAIK the user should be presented with a list of available filesystems... Thomas
[Cooker] [Bug 5389] [rpmdrake] text-mode package depencies selection is broken....
http://qa.mandrakesoft.com/show_bug.cgi?id=5389 [EMAIL PROTECTED] changed: What|Removed |Added Component|Installation|rpmdrake Product|Installation|rpmdrake Version|1.830 |2.1-35mdk --- Additional Comments From [EMAIL PROTECTED] 2003-01-10 00:19 --- Still Valid with DrakX 1.847... a funny part is that even If I unselected kernel-enterprise, and selected kernel-i686..., the enterprise version got installed, not the i686 one... another problem that has showed up during install (but only once so far), is that when selecting packages in the advanced mode, the installer executed probing for serial ports, and went back to the beginning to language selection... -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: When you select the packages, the installer does not select packages that the selected package depends on... ex. if you select samba3-client, samba3-common should be selected... if you select openssh-clients, openssh should be selected... and so on... Since this does not happend, every package that does not have their depencies satisfied will be left uninstalled, leaving you with a minimal install, even if you have chosen more packages... And the urpmi databases / hdlist.cz is ok, since after rebooting into the newly installed system, you can install all packages normally using urpmi, and every needed package/ depencies will be installed as they should... Thank God for urpmi ;-) Thomas
[Cooker] [Bug 5880] [kernel] kernel-secure is broken
http://qa.mandrakesoft.com/show_bug.cgi?id=5880 [EMAIL PROTECTED] changed: What|Removed |Added Severity|blocker |normal Priority|P1 |P2 Summary|kernel-secure is broken |kernel-secure is broken --- Additional Comments From [EMAIL PROTECTED] 2003-01-10 00:23 --- Well, I can't reproduce the firewall bug above anymore, since I have been running the 10mdksecure for about 7 days, without lockups... so the only problem left is the initrd umount failure wich still is valid..., so I'm lowering the rating on this bug ... -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: the grsec part of kernel-secure is locking the kernel too tight, as it blocks the initrd to get unmounted on boot... (or actually it fails to sense the limits, setting them to 0) Easy way to reproduce: 1. install kernel-secure 2. boot with it 3. you will see an error message about failing to unmount initrd.. if you look at the syslogs you will see: grsec: attempted resource overstep by requesting 4096 for RLIMIT_CORE against limit 0 by... (in this case console-chars) now this same bug will show up if you try to start for example X (not that I want tu run X on a secured kernel, but anyway...) The worse part of this is that if you put it on your firewall, it will slowly start to lock up the kernel since the grsec thinks it's an hacking attempt, and will freeze it's functions by longer and longer periods until your firewall/gw stops passing traffic through...
[Cooker] [Bug 5900] [initscripts] nonenglish characters shows up as garbage on shutdown...
http://qa.mandrakesoft.com/show_bug.cgi?id=5900 [EMAIL PROTECTED] changed: What|Removed |Added Status|NEW |RESOLVED Resolution||FIXED --- Additional Comments From [EMAIL PROTECTED] 2003-01-10 00:24 --- This one I cant reproduce anymore, so I'm closing it... -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: I have a fully synced cooker as of Sunday Sept 21, 2003 12:00 UTC and looking at the text at shutdown, every nonenglish character shows up as garbage... it worked before, but now with theese last changes to fonts and initscript the output is broken :( my settings: [EMAIL PROTECTED] Documentation]# cat /etc/sysconfig/i18n LC_PAPER=fi_FI.UTF-8 LC_TELEPHONE=fi_FI.UTF-8 LC_IDENTIFICATION=fi_FI.UTF-8 LC_NAME=fi_FI.UTF-8 LANGUAGE=fi_FI.UTF-8:fi LC_MONETARY=fi_FI.UTF-8 LC_COLLATE=fi_FI.UTF-8 LC_MEASUREMENT=fi_FI.UTF-8 LC_ADDRESS=fi_FI.UTF-8 LC_MESSAGES=fi_FI.UTF-8 LANG=fi_FI.UTF-8 LC_TIME=fi_FI.UTF-8 SYSFONT=lat0-16 LC_CTYPE=fi_FI.UTF-8 LC_NUMERIC=fi_FI.UTF-8
[Cooker] [Bug 5377] [drakxtools] vmlinuz/initrd symlinks in /boot points to the wrong kernel...
http://qa.mandrakesoft.com/show_bug.cgi?id=5377 [EMAIL PROTECTED] changed: What|Removed |Added Component|Installation|drakboot Product|Installation|drakxtools Version|1.847 |9.2-16mdk --- Additional Comments From [EMAIL PROTECTED] 2003-01-10 00:33 --- changing product to a more likely one... and more info that tells me that it isn't bootloader-utils that are messing up... when I install my own kernel-tmb using rpm, the /sbin/installkernel strips away the mdk part from the lilo label..., but when I installed it during a clean install, the 'mdk' part was not stripped from the label... so ... either the drakboot is not using /sbin/installkernel, or it passed weird info along to it... -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: When installing standard kernel-2.4.22.5mdk-1-1mdk from main and kernel-2.6.0-0.test4.3mdk-1-1mdk from contribs during install the initrd.img and vmlinuz symlinks in /boot points to the 2.6 kernel: lrwxrwxrwx 1 root root 29 syys 8 2003 initrd.img -initrd-2.6.0-0.test4.3mdk.img lrwxrwxrwx 1 root root 26 syys 8 2003 vmlinuz -vmlinuz-2.6.0-0.test4.3mdk This is _bad_ since the lilo options linux, linux-nonfb and failsafe all use: image=/boot/vmlinuz initrd=/boot/initrd.img as their kernel choice... This will lead to users trying to fix their broken systems most likely ending up with more problems, since without they knowing it, they will be booting into an 2.6 test-kernel :-( And this is definately an installer bug since all contrib kernels are using -L parameter with /sbin/installkernel, and installing a 2.6 kernel _after_ a newly installed system has been rebooted into, won't trigger this behaviour Regards Thomas
[Cooker] [Bug 1521] [Hardware] network unreacheble
http://qa.mandrakesoft.com/show_bug.cgi?id=1521 --- Additional Comments From [EMAIL PROTECTED] 2003-23-09 22:15 --- Are you using the firewall? If so, is it configured correctly? How do you configure your network ip numbers, through DHCP, or have you entered them yourself? This also looks like an acpi bug, so please try to boot with one of theese: (by pressing F1 end enter them on the command line) linux acpi=off linux pci=noapic -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: ASSIGNED creation_date: description: l.s, Mandrake 9.1 beta 3 Pc medion (aldi) motherbord MD 5000 M_ATX onboard network card windows xp identification sis900 based PCI during start up bringing up interface eth 0 ok eth0 interrupt 19 Info centre network interfaces eth0 not shown. if config eth0 shown without the line inet adrr Bcast Mask (this line is missing) configuratieotherlinuxconf networking host name and ip network devices hostname + domain kruissink10.thuis.nl adapter1 enabled manual kruissink10.thuis.nl aliasses kruissink10 ip 192.168.50.10 mask 255.255.255.0 netdevice eth0 kernel module sis900 dns 212.142.28.66 212.142.28.67 routing and gateways default 192.168.50.1 enable routing /var/log/messages kernel eth0 unknown PHY found at adress 0 kernel eth0 realtek RTL8201 PHY transceiver found at address 1 2 t/m 31 unknown kernel: eth0: using transceiver found at address 31 as default kernel: eth0: SiS 900 PCI Fast Ethernet at 0xec00, irq 19, 00:10:dc:c5:f3:19. ... ... ifplugd[778] warning could not get interface address ifplugd[778] using interface eth0/00:10:DC:C5:F3:19 with driver sis900 v1.08.06 9/24/2002 ... network bringing up interface eth0: succeeded why is PHY at address 31 taken as default realtec RTL8201 is at address 1 Windows Xp home can use the network card But also Lindows 3.0 succeded in using the network interface.
[Cooker] [Bug 5880] [kernel] New: kernel-secure is broken
http://qa.mandrakesoft.com/show_bug.cgi?id=5880 Product: kernel Component: secure Summary: kernel-secure is broken Product: kernel Version: 2.4.22-10mdk Platform: PC OS/Version: All Status: NEW Severity: blocker Priority: P1 Component: secure AssignedTo: [EMAIL PROTECTED] ReportedBy: [EMAIL PROTECTED] CC: [EMAIL PROTECTED] the grsec part of kernel-secure is locking the kernel too tight, as it blocks the initrd to get unmounted on boot... (or actually it fails to sense the limits, setting them to 0) Easy way to reproduce: 1. install kernel-secure 2. boot with it 3. you will see an error message about failing to unmount initrd.. if you look at the syslogs you will see: grsec: attempted resource overstep by requesting 4096 for RLIMIT_CORE against limit 0 by... (in this case console-chars) now this same bug will show up if you try to start for example X (not that I want tu run X on a secured kernel, but anyway...) The worse part of this is that if you put it on your firewall, it will slowly start to lock up the kernel since the grsec thinks it's an hacking attempt, and will freeze it's functions by longer and longer periods until your firewall/gw stops passing traffic through... -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is.
[Cooker] [Bug 5900] [initscripts] New: nonenglish characters shows up as garbage on shutdown...
http://qa.mandrakesoft.com/show_bug.cgi?id=5900 Product: initscripts Component: i18n Summary: nonenglish characters shows up as garbage on shutdown... Product: initscripts Version: 7.06-27mdk Platform: PC OS/Version: All Status: NEW Severity: normal Priority: P2 Component: i18n AssignedTo: [EMAIL PROTECTED] ReportedBy: [EMAIL PROTECTED] CC: [EMAIL PROTECTED] I have a fully synced cooker as of Sunday Sept 21, 2003 12:00 UTC and looking at the text at shutdown, every nonenglish character shows up as garbage... it worked before, but now with theese last changes to fonts and initscript the output is broken :( my settings: [EMAIL PROTECTED] Documentation]# cat /etc/sysconfig/i18n LC_PAPER=fi_FI.UTF-8 LC_TELEPHONE=fi_FI.UTF-8 LC_IDENTIFICATION=fi_FI.UTF-8 LC_NAME=fi_FI.UTF-8 LANGUAGE=fi_FI.UTF-8:fi LC_MONETARY=fi_FI.UTF-8 LC_COLLATE=fi_FI.UTF-8 LC_MEASUREMENT=fi_FI.UTF-8 LC_ADDRESS=fi_FI.UTF-8 LC_MESSAGES=fi_FI.UTF-8 LANG=fi_FI.UTF-8 LC_TIME=fi_FI.UTF-8 SYSFONT=lat0-16 LC_CTYPE=fi_FI.UTF-8 LC_NUMERIC=fi_FI.UTF-8 -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is.
[Cooker] [Bug 509] [kernel] Intel ICH4 based Motherboards-- sound and IDE DMA do not work
http://qa.mandrakesoft.com/show_bug.cgi?id=509 --- Additional Comments From [EMAIL PROTECTED] 2003-20-09 13:18 --- Please test with the latest Cooker kernel wich is 2.4.22-10mdk -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: The intel motherboards with the ICH4 controller have severe problems with kernel 2.4.19.16mdk. a) On boot up, the message PCI: Device 00:1f.1 not available because of resource collisions The relevant sections from dmesg are The first reference to 00:1f.1 PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Using IRQ router PIIX [8086/24c0] at 00:1f.0 PCI: Found IRQ 9 for device 00:1f.1 PCI: Sharing IRQ 9 with 00:1d.2 .Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH4: IDE controller on PCI bus 00 dev f9 PCI: Device 00:1f.1 not available because of resource collisions ICH4: (ide_setup_pci_device:) Could not enable device. hda: Maxtor 91531U3, ATA DISK drive hdb: ST340016A, ATA DISK drive hdc: HL-DT-ST CD-ROM GCR-8520B, ATAPI CD/DVD-ROM drive hdd: HITACHI DVD-ROM GD-2000, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 lspci gives ... 00:1f.0 ISA bridge: Intel Corp.: Unknown device 24c0 (rev 01) 00:1f.1 IDE interface: Intel Corp. 82801DB ICH4 IDE (rev 01) 00:1f.3 SMBus: Intel Corp.: Unknown device 24c3 (rev 01) ... b) trying to start up dma does not work. hdparm /dev/hda /dev/hda: multcount= 16 (on) IO_support = 0 (default 16-bit) unmaskirq= 0 (off) using_dma= 0 (off) keepsettings = 0 (off) readonly = 0 (off) readahead= 8 (on) geometry = 1868/255/63, sectors = 30015216, start = 0 ]hdparm -d1 /dev/hda /dev/hda: setting using_dma to 1 (on) HDIO_SET_DMA failed: Operation not permitted using_dma= 0 (off) The disks are very slow. c) Sound does not work. The standare oss drivers do not load at all. -- error that the codec cannot be intialised. The alsa drivers load fine, but again no sound. (again using the onboard sound ICH4 sound card)
[Cooker] [Bug 3847] [Installation] 9.1 Installation kernel fails
http://qa.mandrakesoft.com/show_bug.cgi?id=3847 --- Additional Comments From [EMAIL PROTECTED] 2003-18-09 13:06 --- Nothing has substantially changed... It may feel so... but since the newer chipsets are not fully supported in older kernels, there will most likely be problems one way or another... try booting with my boot-cd, press F1 at the beginning and type linux noapic acpi=off and see if it works... Here is an other suggestion... go grab this image (from current cooker) ftp://ftp.uninett.no/linux/Mandrake/Mandrake-devel/cooker/i586/images/cdrom.img ( or this one if you want to actually try to install a MDK 9.2 RC2+: ftp://ftp.uninett.no/linux/Mandrake/Mandrake-devel/cooker/i586/images/cdrom.img) and make a bootdisk to boot from ... Of course you can't install your 9.1 with it, but I wan't to know if the 9.2 kernels work with your h/w... so if you can boot with it, and it will complain about secondary stage installer or modules... we'll know that 9.2 is capable of booting on you h/w -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: Attempting to install Mandrake Linux 9.1 fails on most obvious paths: 1) Boot from CD1. Enter. Black screen and hang. 2) Boot from CD2. Enter. Black screen and hang. 3) Boot from CD1: text: loads kernel image. Ready. and hang. vgahi: loads kernel image. Ready. and hang. vgalo: loads kernel image. Ready. and hang. linux: loads kernel image. Ready. and hang. alt1: loads kernel image. Ready. and hang. 4) All of items under #3, with option mem=800M. 5) All of items under #3, with option mem=200M. 6) Boot from floppy, repeat #3, #4, and #5. I wasn't able to try booting from floppy intending to install from HD since the instructions for doing so appear to have been well hidden. Hardware: Gigabyte GA-7VRXP (rev. 1.0, BIOS F11) AMD Athlon XP 1800+ 2 x 512MB DDR/266 ECC SDRAM DIMMs MSI GF4 Ti 4800, 8xAGP, 128MB Adaptec AHA-2940UW Pioneer DVD-305S Pioneer DVR-104 [other SCSI devices] SB Audigy Platinum CDs's MD5 ckecksums are correct.
[Cooker] [Bug 5377] [bootloader-utils] vmlinuz/initrd symlinks in /boot points to the wrong kernel...
http://qa.mandrakesoft.com/show_bug.cgi?id=5377 --- Additional Comments From [EMAIL PROTECTED] 2003-18-09 13:48 --- Actually I don't think bootloader-utils is to blame, since as I stated in the initial report... If you install the same kernel-2.6 on a running system with only 2.4 kernels using rpm, the symlinks wont be changed... so there bug is elsewere afaik... -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: When installing standard kernel-2.4.22.5mdk-1-1mdk from main and kernel-2.6.0-0.test4.3mdk-1-1mdk from contribs during install the initrd.img and vmlinuz symlinks in /boot points to the 2.6 kernel: lrwxrwxrwx 1 root root 29 syys 8 2003 initrd.img -initrd-2.6.0-0.test4.3mdk.img lrwxrwxrwx 1 root root 26 syys 8 2003 vmlinuz -vmlinuz-2.6.0-0.test4.3mdk This is _bad_ since the lilo options linux, linux-nonfb and failsafe all use: image=/boot/vmlinuz initrd=/boot/initrd.img as their kernel choice... This will lead to users trying to fix their broken systems most likely ending up with more problems, since without they knowing it, they will be booting into an 2.6 test-kernel :-( And this is definately an installer bug since all contrib kernels are using -L parameter with /sbin/installkernel, and installing a 2.6 kernel _after_ a newly installed system has been rebooted into, won't trigger this behaviour Regards Thomas
[Cooker] [Bug 5221] [bootloader-utils] Fail to create /lib/modules/kernel/build symlink
http://qa.mandrakesoft.com/show_bug.cgi?id=5221 [EMAIL PROTECTED] changed: What|Removed |Added Status|RESOLVED|REOPENED Resolution|FIXED | --- Additional Comments From [EMAIL PROTECTED] 2003-16-09 17:16 --- Can you verify that /sbin/installkernel is fixed in your system according to the patch: http://qa.mandrakesoft.com/attachment.cgi?id=732action=view do you install the kernel or the kernel-source first ? I'm seeing some other weird things here... I'm installing the kernel-source first... my /usr/src now has: (since I have installed every source with rpm -i ...) linux-2.4.22-7mdk/ linux-2.4.22-8mdk/ linux-2.4.22-9mdk/ then when I installed the 9mdk kernel, I got a ~linux-2.4.22-9mdk symlink in the 7mdk and 8mdk directories... that points to the 9mdk (the /lib/modules/'uname -r'/~build symlink gets created correctly) Seems I have to take a second look at the installkernel script.. -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: REOPENED creation_date: description: Whenever new kernel is installed, the following message will be seen: ln: invalid option -- o Try `ln --help' for more information. It's because there is a typo in do_create_link_source(): version=`echo $version | sed 's/-BOOT//'` local kernel_source=/usr/src/linux-$version if [ -d $kernel_source ]; then ln -sf $kernel-source /lib/modules/$kversion/build fi The hyphen between $kernel and source should be underscore instead. Otherwise -source will be parsed as option to ln, thus causing failure to create the .../build symlink.
[Cooker] [Bug 5221] [bootloader-utils] Fail to create /lib/modules/kernel/build symlink
http://qa.mandrakesoft.com/show_bug.cgi?id=5221 [EMAIL PROTECTED] changed: What|Removed |Added Status|NEW |RESOLVED Resolution||FIXED --- Additional Comments From [EMAIL PROTECTED] 2003-15-09 20:54 --- have you installed the latest version? [EMAIL PROTECTED] thomas]$ rpm -qa bootloader-utils bootloader-utils-1.6-2mdk it's fixed there... (AFAIK it was fixed in 1.5-1mdk) -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: Whenever new kernel is installed, the following message will be seen: ln: invalid option -- o Try `ln --help' for more information. It's because there is a typo in do_create_link_source(): version=`echo $version | sed 's/-BOOT//'` local kernel_source=/usr/src/linux-$version if [ -d $kernel_source ]; then ln -sf $kernel-source /lib/modules/$kversion/build fi The hyphen between $kernel and source should be underscore instead. Otherwise -source will be parsed as option to ln, thus causing failure to create the .../build symlink.
[Cooker] [Bug 4899] [Installation] USB modules do not load
http://qa.mandrakesoft.com/show_bug.cgi?id=4899 --- Additional Comments From [EMAIL PROTECTED] 2003-10-09 23:23 --- Have you tested with the latest kernel from Cooker? We want the output of lspcidrake -v, and the file /var/log/dmesg -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: During installation usb-ehci and usb-ohci do not load (error message pops up)
[Cooker] [Bug 5303] [mkbootdisk] cannot make bootdisk
http://qa.mandrakesoft.com/show_bug.cgi?id=5303 --- Additional Comments From [EMAIL PROTECTED] 2003-08-09 11:14 --- That's not the problem... you also need space for an initrd on the floppy... Thomas -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: It complains about running out of space. It seems to unmount the When the program starts out df shows this: /dev/floppy/0u14401.4M 1.3M 106K 93% /tmp/mkbootdisk After some pointe df shows this ( and says that there is no space ) /dev/floppy/0u14402.4G 1.8G 454M 81% /tmp/mkbootdisk oddly enough this is the same as: /dev/ide/host0/bus0/target0/lun0/part7 2.4G 1.8G 455M 81% / It makes it hard to create a floppy. ( And lately I need it with my lilo/reiserfs problems...) mkbootdisk was run both from the gui and from the command line: mkbootdisk --device /dev/fd0u1440 2.4.22-5mdk
[Cooker] [Bug 5227] [kernel] suspend/resume issue.
http://qa.mandrakesoft.com/show_bug.cgi?id=5227 --- Additional Comments From [EMAIL PROTECTED] 2003-08-09 11:16 --- Have you tried with the latest kernel (2.4.22-6mdk)? Thomas -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: On a ThinkPad A22p with the builtin ethernet card there is an issue with susped / resume if the machine is started with the network attached. This is with acpi set to ht. When the machine suspends with the network attached it takes about a minute to go through it's operations then the machine emits a single low beep and does not suspend ( to ram ). This is what shows in messages: Sep 2 21:04:25 localhost xinetd[1587]: Sending signal 9 to sgi_fam server 2252 Sep 2 21:04:25 localhost xinetd[1587]: Exiting... Sep 2 21:04:25 localhost xinetd: xinetd shutdown succeeded Sep 2 21:04:25 localhost kernel: unloading Kernel Card Services Sep 2 21:04:26 localhost modprobe: modprobe: Can't locate module snd-card-1 Sep 2 21:04:26 localhost modprobe: modprobe: Can't locate module snd-card-2 Sep 2 21:04:26 localhost modprobe: modprobe: Can't locate module snd-card-3 Sep 2 21:04:26 localhost modprobe: modprobe: Can't locate module snd-card-4 Sep 2 21:04:26 localhost modprobe: modprobe: Can't locate module snd-card-5 Sep 2 21:04:26 localhost modprobe: modprobe: Can't locate module snd-card-6 Sep 2 21:04:26 localhost modprobe: modprobe: Can't locate module snd-card-7 Sep 2 21:04:28 localhost alsa: succeeded Sep 2 21:04:29 localhost alsa: succeeded Sep 2 21:04:30 localhost network: Shutting down interface eth0: succeeded Sep 2 21:04:30 localhost network: Shutting down loopback interface: succeeded Sep 2 21:04:30 localhost /etc/hotplug/net.agent: NET unregister event not suppo rted Sep 2 21:04:32 localhost ntpd[1514]: sendto(208.201.224.76): Invalid argument Sep 2 21:04:40 localhost kernel: unregister_netdevice: waiting for eth0 to beco me free. Usage count = 2 Sep 2 21:05:11 localhost last message repeated 3 times Sep 2 21:06:12 localhost last message repeated 6 times When the machine is opened the screen is garbled and the keyboard is dead. Power cycling the machine is the only option. If the machine is started *without* the network attached then suspend/resume works fine. After the first suspend/resume you can connect the network cable and then suspend/resume with no problems.
[Cooker] [Bug 3847] [Installation] 9.1 Installation kernel fails
http://qa.mandrakesoft.com/show_bug.cgi?id=3847 --- Additional Comments From [EMAIL PROTECTED] 2003-08-09 18:26 --- Yes, if you go to http://www.iki.fi/tmb/9.1/ and use the bootfloppy there, or the boot-cd if you prefer... and follow the instructions on the page on how to use them... Thomas -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: Attempting to install Mandrake Linux 9.1 fails on most obvious paths: 1) Boot from CD1. Enter. Black screen and hang. 2) Boot from CD2. Enter. Black screen and hang. 3) Boot from CD1: text: loads kernel image. Ready. and hang. vgahi: loads kernel image. Ready. and hang. vgalo: loads kernel image. Ready. and hang. linux: loads kernel image. Ready. and hang. alt1: loads kernel image. Ready. and hang. 4) All of items under #3, with option mem=800M. 5) All of items under #3, with option mem=200M. 6) Boot from floppy, repeat #3, #4, and #5. I wasn't able to try booting from floppy intending to install from HD since the instructions for doing so appear to have been well hidden. Hardware: Gigabyte GA-7VRXP (rev. 1.0, BIOS F11) AMD Athlon XP 1800+ 2 x 512MB DDR/266 ECC SDRAM DIMMs MSI GF4 Ti 4800, 8xAGP, 128MB Adaptec AHA-2940UW Pioneer DVD-305S Pioneer DVR-104 [other SCSI devices] SB Audigy Platinum CDs's MD5 ckecksums are correct.
[Cooker] [Bug 5420] [bootloader-utils] 1.6-1mdk conflict with initscripts-7.06-20mdk
http://qa.mandrakesoft.com/show_bug.cgi?id=5420 [EMAIL PROTECTED] changed: What|Removed |Added Status|UNCONFIRMED |RESOLVED Resolution||FIXED --- Additional Comments From [EMAIL PROTECTED] 2003-08-09 22:59 --- fixed in bootloader-utils-1.6-2mdk -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: file /etc/rc.d/init.d/kheader from install of bootloader-utils-1.6-1mdk conflicts with file from package initscripts-7.06-20mdk
[Cooker] [Bug 2764] [Installation] kernel-enterprise needed for mem=1024 on i8200 bit strange?
http://qa.mandrakesoft.com/show_bug.cgi?id=2764 [EMAIL PROTECTED] changed: What|Removed |Added Status|UNCONFIRMED |RESOLVED Resolution||INVALID --- Additional Comments From [EMAIL PROTECTED] 2003-08-09 02:00 --- Closing as invalid, as it's a mdk decision to provide users with the choice speed vs full memory, so it's a feature, not a bug On a side note... we now also have an up kernel with highmem support... -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: It is a bit curious that when mem=1024 two kernels get installed: kernel and kernel-enterprise. When booting with kernel only 896 MB memory is found. Trying to boot with 'mem=1024' in grub does not succeed. The boot stops with error. kernel-enterprise works and shows 127 MB HIGHMEM and 896 MB LOWMEM. Why is not kernel-enterprise installed as default. Or why not just make one kernel?
[Cooker] [Bug 3847] [Installation] 9.1 Installation kernel fails
http://qa.mandrakesoft.com/show_bug.cgi?id=3847 [EMAIL PROTECTED] changed: What|Removed |Added Status|UNCONFIRMED |RESOLVED Resolution||FIXED --- Additional Comments From [EMAIL PROTECTED] 2003-08-09 02:03 --- This one is fixed in Cooker, and the mdk 9.1 update kernels... This hang was due to the vesafb memory allocation bug... -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: Attempting to install Mandrake Linux 9.1 fails on most obvious paths: 1) Boot from CD1. Enter. Black screen and hang. 2) Boot from CD2. Enter. Black screen and hang. 3) Boot from CD1: text: loads kernel image. Ready. and hang. vgahi: loads kernel image. Ready. and hang. vgalo: loads kernel image. Ready. and hang. linux: loads kernel image. Ready. and hang. alt1: loads kernel image. Ready. and hang. 4) All of items under #3, with option mem=800M. 5) All of items under #3, with option mem=200M. 6) Boot from floppy, repeat #3, #4, and #5. I wasn't able to try booting from floppy intending to install from HD since the instructions for doing so appear to have been well hidden. Hardware: Gigabyte GA-7VRXP (rev. 1.0, BIOS F11) AMD Athlon XP 1800+ 2 x 512MB DDR/266 ECC SDRAM DIMMs MSI GF4 Ti 4800, 8xAGP, 128MB Adaptec AHA-2940UW Pioneer DVD-305S Pioneer DVR-104 [other SCSI devices] SB Audigy Platinum CDs's MD5 ckecksums are correct.
[Cooker] [Bug 5377] [Installation] New: vmlinuz/initrd symlinks in /boot points to the wrong kernel...
http://qa.mandrakesoft.com/show_bug.cgi?id=5377 Product: Installation Component: Installation Summary: vmlinuz/initrd symlinks in /boot points to the wrong kernel... Product: Installation Version: 1.830 Platform: Other OS/Version: All Status: NEW Severity: blocker Priority: P1 Component: Installation AssignedTo: [EMAIL PROTECTED] ReportedBy: [EMAIL PROTECTED] When installing standard kernel-2.4.22.5mdk-1-1mdk from main and kernel-2.6.0-0.test4.3mdk-1-1mdk from contribs during install the initrd.img and vmlinuz symlinks in /boot points to the 2.6 kernel: lrwxrwxrwx 1 root root 29 syys 8 2003 initrd.img -initrd-2.6.0-0.test4.3mdk.img lrwxrwxrwx 1 root root 26 syys 8 2003 vmlinuz -vmlinuz-2.6.0-0.test4.3mdk This is _bad_ since the lilo options linux, linux-nonfb and failsafe all use: image=/boot/vmlinuz initrd=/boot/initrd.img as their kernel choice... This will lead to users trying to fix their broken systems most likely ending up with more problems, since without they knowing it, they will be booting into an 2.6 test-kernel :-( And this is definately an installer bug since all contrib kernels are using -L parameter with /sbin/installkernel, and installing a 2.6 kernel _after_ a newly installed system has been rebooted into, won't trigger this behaviour Regards Thomas -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is.
[Cooker] [Bug 5377] [Installation] vmlinuz/initrd symlinks in /boot points to the wrong kernel...
http://qa.mandrakesoft.com/show_bug.cgi?id=5377 --- Additional Comments From [EMAIL PROTECTED] 2003-08-09 02:28 --- Created an attachment (id=767) -- (http://qa.mandrakesoft.com/attachment.cgi?id=767action=view) The install report for verification... -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: When installing standard kernel-2.4.22.5mdk-1-1mdk from main and kernel-2.6.0-0.test4.3mdk-1-1mdk from contribs during install the initrd.img and vmlinuz symlinks in /boot points to the 2.6 kernel: lrwxrwxrwx 1 root root 29 syys 8 2003 initrd.img -initrd-2.6.0-0.test4.3mdk.img lrwxrwxrwx 1 root root 26 syys 8 2003 vmlinuz -vmlinuz-2.6.0-0.test4.3mdk This is _bad_ since the lilo options linux, linux-nonfb and failsafe all use: image=/boot/vmlinuz initrd=/boot/initrd.img as their kernel choice... This will lead to users trying to fix their broken systems most likely ending up with more problems, since without they knowing it, they will be booting into an 2.6 test-kernel :-( And this is definately an installer bug since all contrib kernels are using -L parameter with /sbin/installkernel, and installing a 2.6 kernel _after_ a newly installed system has been rebooted into, won't trigger this behaviour Regards Thomas
[Cooker] [Bug 5383] [Installation] New: UTF-8 breaks text-mode install
http://qa.mandrakesoft.com/show_bug.cgi?id=5383 Product: Installation Component: i18n Summary: UTF-8 breaks text-mode install Product: Installation Version: 1.830 Platform: Other OS/Version: All Status: NEW Severity: normal Priority: P2 Component: i18n AssignedTo: [EMAIL PROTECTED] ReportedBy: [EMAIL PROTECTED] I tried to do an text-mode install, selecting the Finnish locale... and Use UTF-8 by default option From the next screen the text was a PITA to read since every non-english character was replaced with weird characters, makeing it impossible to continue the install... Thomas -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is.
[Cooker] [Bug 5383] [Installation] UTF-8 breaks text-mode install
http://qa.mandrakesoft.com/show_bug.cgi?id=5383 --- Additional Comments From [EMAIL PROTECTED] 2003-08-09 02:50 --- I forgot to add: I didn't finish the install, so there is no report.bug.gz to check... The Finnish libDrakX.mo uses UTF-8 by default... Doing a text-mode install without selecting the: Use UTF-8 by default the install text works as it should... Thomas -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: I tried to do an text-mode install, selecting the Finnish locale... and Use UTF-8 by default option From the next screen the text was a PITA to read since every non-english character was replaced with weird characters, makeing it impossible to continue the install... Thomas
[Cooker] [Bug 5384] [Installation] New: text in VGA16 install mode is almost impossible to read...
http://qa.mandrakesoft.com/show_bug.cgi?id=5384 Product: Installation Component: Installation Summary: text in VGA16 install mode is almost impossible to read... Product: Installation Version: 1.830 Platform: Other OS/Version: All Status: NEW Severity: normal Priority: P2 Component: Installation AssignedTo: [EMAIL PROTECTED] ReportedBy: [EMAIL PROTECTED] When I tried to install on my old server, the installer chose vga16 as installmode (it's an old S3 trio64 card) This made the language selection screen almost impossible to use... maybe we need to choose better colors... Thomas -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is.
[Cooker] [Bug 5385] [Installation] New: Decline button don't work in text-mode
http://qa.mandrakesoft.com/show_bug.cgi?id=5385 Product: Installation Component: Installation Summary: Decline button don't work in text-mode Product: Installation Version: 1.830 Platform: Other OS/Version: All Status: NEW Severity: normal Priority: P2 Component: Installation AssignedTo: [EMAIL PROTECTED] ReportedBy: [EMAIL PROTECTED] When you get to the point where you have to accept/decline the MDK licence, if you choose decline... nothing happends... AFAIK the installer should abort and shutdown or reboot the computer... Thomas -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is.
[Cooker] [Bug 5386] [Installation] New: text-mode choosing security-level window needs scrollable help window
http://qa.mandrakesoft.com/show_bug.cgi?id=5386 Product: Installation Component: Installation Summary: text-mode choosing security-level window needs scrollable help window Product: Installation Version: 1.830 Platform: Other OS/Version: All Status: NEW Severity: normal Priority: P2 Component: Installation AssignedTo: [EMAIL PROTECTED] ReportedBy: [EMAIL PROTECTED] When you get to the point where you have to choose default security level, the help window does not show the help text for all options, since there are more text in the helpfile than fits in the present window... AFAIK the helpwindow needs the same vertical scrollbars as used in the mdk licence window... Thomas -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is.
[Cooker] [Bug 5387] [Installation] New: text-mode package selection broken (or uggly...)
http://qa.mandrakesoft.com/show_bug.cgi?id=5387 Product: Installation Component: Installation Summary: text-mode package selection broken (or uggly...) Product: Installation Version: 1.830 Platform: PC OS/Version: All Status: NEW Severity: normal Priority: P2 Component: Installation AssignedTo: [EMAIL PROTECTED] ReportedBy: [EMAIL PROTECTED] When you geet to the point where you choose packages, every package group header line has many underscores after them... ex: Development [ ] package 1 [ ] package 2 ... Servers [ ] package 1 [ ] package 2 ... wich makes the uggly to look at and read... Thomas -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is.
[Cooker] [Bug 5388] [Installation] New: tex-mode partitioning wont let you change fs type after a partition is created..
http://qa.mandrakesoft.com/show_bug.cgi?id=5388 Product: Installation Component: Installation Summary: tex-mode partitioning wont let you change fs type after a partition is created.. Product: Installation Version: 1.830 Platform: PC OS/Version: All Status: NEW Severity: major Priority: P2 Component: Installation AssignedTo: [EMAIL PROTECTED] ReportedBy: [EMAIL PROTECTED] When you get to the point where you have to partition the harddisks, you can only choose fs type when you create the partition... If you try to change fs type on an existing partition, you are presented with an dialog with an editable text string: Journalised FS: ext3 If you try to change that line by editing the textline (ex: ext3-ReiserFS), the installer will later complain about an unknown filesystem... AFAIK the user should be presented with a list of available filesystems... Thomas -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is.
[Cooker] [Bug 5389] [Installation] New: text-mode package depencies selection is broken....
http://qa.mandrakesoft.com/show_bug.cgi?id=5389 Product: Installation Component: Installation Summary: text-mode package depencies selection is broken Product: Installation Version: 1.830 Platform: PC OS/Version: All Status: NEW Severity: blocker Priority: P1 Component: Installation AssignedTo: [EMAIL PROTECTED] ReportedBy: [EMAIL PROTECTED] When you select the packages, the installer does not select packages that the selected package depends on... ex. if you select samba3-client, samba3-common should be selected... if you select openssh-clients, openssh should be selected... and so on... Since this does not happend, every package that does not have their depencies satisfied will be left uninstalled, leaving you with a minimal install, even if you have chosen more packages... And the urpmi databases / hdlist.cz is ok, since after rebooting into the newly installed system, you can install all packages normally using urpmi, and every needed package/ depencies will be installed as they should... Thank God for urpmi ;-) Thomas -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is.
[Cooker] [Bug 5389] [Installation] text-mode package depencies selection is broken....
http://qa.mandrakesoft.com/show_bug.cgi?id=5389 --- Additional Comments From [EMAIL PROTECTED] 2003-08-09 03:41 --- Created an attachment (id=768) -- (http://qa.mandrakesoft.com/attachment.cgi?id=768action=view) text-mode install report for verification I forgot to add that in graphical install this problem does not exist... Thomas -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: When you select the packages, the installer does not select packages that the selected package depends on... ex. if you select samba3-client, samba3-common should be selected... if you select openssh-clients, openssh should be selected... and so on... Since this does not happend, every package that does not have their depencies satisfied will be left uninstalled, leaving you with a minimal install, even if you have chosen more packages... And the urpmi databases / hdlist.cz is ok, since after rebooting into the newly installed system, you can install all packages normally using urpmi, and every needed package/ depencies will be installed as they should... Thank God for urpmi ;-) Thomas
[Cooker] [Bug 5267] [kernel] swsusp patches for the kernel
http://qa.mandrakesoft.com/show_bug.cgi?id=5267 [EMAIL PROTECTED] changed: What|Removed |Added Status|UNCONFIRMED |RESOLVED Resolution||INVALID --- Additional Comments From [EMAIL PROTECTED] 2003-04-09 22:37 --- We already have swsusp 1.0.3 in the kernel... and 9.1 had beta19-16 if IRC... -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: Greetings, it would be very advantageous to the Mandrake distribution to support by default the sotware suspend (swsusp) patches in its kernel. Doing so, it would be the first and only distribution offering this definite bonus. Swsusp patches can be found at: http://swsusp.sf.net/ To give a quick overview, when activated, those patches enable the writing of all the RAM to the swap partition (and a few other things) and turns off the machine. At next bootup, the RAM will be rewritten with what's in the swap, so the state of the machine is virtually identical to when it was turned off, bypassing all the init scripts and so forth, bringing the boot time to a decent time. Thanks for considering this very valuable addon. Aurelien Marchand
[Cooker] [Bug 5221] [bootloader-utils] Fail to create /lib/modules/kernel/build symlink
http://qa.mandrakesoft.com/show_bug.cgi?id=5221 --- Additional Comments From [EMAIL PROTECTED] 2003-03-09 08:33 --- rebuilt rpms for those who can't wait: http://www.iki.fi/tmb/Cooker/bootloader-utils-1.4-2mdk.i586.rpm http://www.iki.fi/tmb/Cooker/bootloader-utils-1.4-2mdk.src.rpm -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: Whenever new kernel is installed, the following message will be seen: ln: invalid option -- o Try `ln --help' for more information. It's because there is a typo in do_create_link_source(): version=`echo $version | sed 's/-BOOT//'` local kernel_source=/usr/src/linux-$version if [ -d $kernel_source ]; then ln -sf $kernel-source /lib/modules/$kversion/build fi The hyphen between $kernel and source should be underscore instead. Otherwise -source will be parsed as option to ln, thus causing failure to create the .../build symlink.
[Cooker] [Bug 5221] [bootloader-utils] Fail to create /lib/modules/kernel/build symlink
http://qa.mandrakesoft.com/show_bug.cgi?id=5221 --- Additional Comments From [EMAIL PROTECTED] 2003-03-09 08:25 --- Created an attachment (id=731) -- (http://qa.mandrakesoft.com/attachment.cgi?id=731action=view) fixes obsoletes / provides the bootloader-utils needs even more fixes: - it needs to obsolete/provide kernel-utils for updates, or rpm will complain about older kernels... -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: Whenever new kernel is installed, the following message will be seen: ln: invalid option -- o Try `ln --help' for more information. It's because there is a typo in do_create_link_source(): version=`echo $version | sed 's/-BOOT//'` local kernel_source=/usr/src/linux-$version if [ -d $kernel_source ]; then ln -sf $kernel-source /lib/modules/$kversion/build fi The hyphen between $kernel and source should be underscore instead. Otherwise -source will be parsed as option to ln, thus causing failure to create the .../build symlink.
[Cooker] [Bug 5221] [bootloader-utils] Fail to create /lib/modules/kernel/build symlink
http://qa.mandrakesoft.com/show_bug.cgi?id=5221 --- Additional Comments From [EMAIL PROTECTED] 2003-03-09 08:26 --- Created an attachment (id=732) -- (http://qa.mandrakesoft.com/attachment.cgi?id=732action=view) /sbin/installkernel fixes... the bootloader-utils needs even more fixes: - fix typo mentioned in initialbugreport of installkernel - fix getopts in installkernel -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: Whenever new kernel is installed, the following message will be seen: ln: invalid option -- o Try `ln --help' for more information. It's because there is a typo in do_create_link_source(): version=`echo $version | sed 's/-BOOT//'` local kernel_source=/usr/src/linux-$version if [ -d $kernel_source ]; then ln -sf $kernel-source /lib/modules/$kversion/build fi The hyphen between $kernel and source should be underscore instead. Otherwise -source will be parsed as option to ln, thus causing failure to create the .../build symlink.
[Cooker] [Bug 4530] [kernel-source] Kernel source is not world-readable
http://qa.mandrakesoft.com/show_bug.cgi?id=4530
[EMAIL PROTECTED] changed:
What|Removed |Added
Status|UNCONFIRMED |ASSIGNED
Ever Confirmed||1
--- Additional Comments From [EMAIL PROTECTED] 2003-07-08 00:49 ---
The trubling parts are the bcm drivers...
It should be fixed if you accept the patches I sent
to you Juan... (since I did a chmod on the patches before I packaged them...)
It is theese patches:
MC29-2_bcm5700_v6.2.11.tar.bz2
MC31-2_bcm4400_v2.0.2.tar.bz2
And you know where to get them...
Thomas
--
Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email
--- You are receiving this mail because: ---
You are on the CC list for the bug, or are watching someone who is.
--- Reminder: ---
assigned_to: [EMAIL PROTECTED]
status: ASSIGNED
creation_date:
description:
Not all files in the kernel-source package are world-readable.
Some packages, such as kernel-win4lin (from Netraverse) build kernels by copying
the kernel-sources from the installed kernel-source package, and the build fails
since it cannot copy an entire kernel tree.
Please add a 'chmod -R a+r %{buildroot}/usr/src/linux*' or %defattr or
equivalent to the kernel spec file so this doesn't happen ...
[Cooker] [Bug 4434] [kernel] IDE DMA unavailable on Acer Travelmate 800LCi
http://qa.mandrakesoft.com/show_bug.cgi?id=4434 [EMAIL PROTECTED] changed: What|Removed |Added Status|NEW |RESOLVED Component|Hardware|kernel Product|Hardware|kernel Resolution||INVALID Version|9.2-0.3mdk |2.4.21-6mdk --- Additional Comments From [EMAIL PROTECTED] 2003-30-07 12:17 --- That kernel is for 9.1 BugZilla is for upcoming 9.2, where that ide chipset already is supported altleast since 2.4.21 final -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: IDE DMA is still unavailable with kernel 2.4.21-0.25mdk on the laptop Acer TM800 LCi (I imagine also with other Centrino laptops). Here are some information on how to patch the kernel in order to have this: http://www-lehre.informatik.uni-osnabrueck.de/~rfreund/tm.php
[Cooker] [Bug 3546] [kernel] Can't use Normal IDE on Raid channels on MSI KT3 Ultra2-R
http://qa.mandrakesoft.com/show_bug.cgi?id=3546 --- Additional Comments From [EMAIL PROTECTED] 2003-29-07 01:30 --- http://www.iki.fi/tmb/9.1/ -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: I have been using Mdk 9.0 on this motherboard with a modded bios to allow the use of the raid channels as normal ide, for optical drives and hard drives. With Mdk 9.0 it has performed without flaw. First I tried installing Mdk 9.1 RC2. Neither during install nor after install would the Mandrake see the hard drive or the cd burner on IDE3 and 4. It is the same for 9.1 final. Going into the mandrake control center under hardware the only controller that shows up in Mdk 9.0 is the via IDE controller. In Mdk 9.1 both an IDE controller and a promise 20276 RAID controller shows. Yes it is a promise 200276 RAID controller but with Mdk 9.0 it is recognised as an IDE controller and functions as is should based on the bios settings.
[Cooker] [Bug 4355] [initscripts] localized umlauts shows up as ? on startup...
http://qa.mandrakesoft.com/show_bug.cgi?id=4355 --- Additional Comments From [EMAIL PROTECTED] 2003-28-07 01:21 --- Created an attachment (id=557) -- (http://qa.mandrakesoft.com/attachment.cgi?id=557action=view) adds export LANG in functions This patch (initially created by Andrey) adds the line: 'export LANG' to /etc/rc.d/init.d/functions By adding this minimal patch my initscripts now speak to me correctly... Now I don't know if this is the correct way to solve this problem, but atleast it works for me... -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: Upon bootup when the initscripts output scrolls by, all special characters a.k.a umlauts (for example å, ä, ö, ...) shows up as ? This bug apeared somewhere after MDK 9.1 Release... And it is present in 9.2beta1 and current Cooker... This is on a Finnish locale, but I have seen others complain about it on th ML... my settings: [EMAIL PROTECTED] root]# cat /etc/sysconfig/i18n SYSFONTACM=iso15 LC_TELEPHONE=fi_FI LC_CTYPE=fi_FI LANGUAGE=fi_FI:fi LC_MONETARY=fi_FI LC_ADDRESS=fi_FI LC_COLLATE=fi_FI LC_NAME=fi_FI LC_PAPER=fi_FI LC_NUMERIC=fi_FI SYSFONT=lat0-16 LC_TIME=fi_FI LC_MEASUREMENT=fi_FI LANG=fi_FI LC_MESSAGES=fi_FI LC_IDENTIFICATION=fi_FI
[Cooker] [Bug 4355] [initscripts] New: localized umlauts shows up as ? on startup...
http://qa.mandrakesoft.com/show_bug.cgi?id=4355 Product: initscripts Component: initscripts Summary: localized umlauts shows up as ? on startup... Product: initscripts Version: 7.06-14mdk Platform: PC OS/Version: All Status: NEW Severity: normal Priority: P2 Component: initscripts AssignedTo: [EMAIL PROTECTED] ReportedBy: [EMAIL PROTECTED] Upon bootup when the initscripts output scrolls by, all special characters a.k.a umlauts (for example å, ä, ö, ...) shows up as ? This bug apeared somewhere after MDK 9.1 Release... And it is present in 9.2beta1 and current Cooker... This is on a Finnish locale, but I have seen others complain about it on th ML... my settings: [EMAIL PROTECTED] root]# cat /etc/sysconfig/i18n SYSFONTACM=iso15 LC_TELEPHONE=fi_FI LC_CTYPE=fi_FI LANGUAGE=fi_FI:fi LC_MONETARY=fi_FI LC_ADDRESS=fi_FI LC_COLLATE=fi_FI LC_NAME=fi_FI LC_PAPER=fi_FI LC_NUMERIC=fi_FI SYSFONT=lat0-16 LC_TIME=fi_FI LC_MEASUREMENT=fi_FI LANG=fi_FI LC_MESSAGES=fi_FI LC_IDENTIFICATION=fi_FI -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is.
[Cooker] [Bug 1562] [kernel-2.4.21-0.pre7.0.2mdk] gdb doesn't seem to work
http://qa.mandrakesoft.com/show_bug.cgi?id=1562
[EMAIL PROTECTED] changed:
What|Removed |Added
Status|REOPENED|RESOLVED
Resolution||FIXED
--- Additional Comments From [EMAIL PROTECTED] 2003-23-07 15:27 ---
This one is fixed in the Cooker 2.4.21-5mdk,
and for 9.1 with the 2.4.21.0.24mdk update kernel
--
Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email
--- You are receiving this mail because: ---
You are on the CC list for the bug, or are watching someone who is.
--- Reminder: ---
assigned_to: [EMAIL PROTECTED]
status: RESOLVED
creation_date:
description:
Example:
dimple-lt% cat simple.c
#include stdio.h
int main(int argc, char *argv[])
{
printf(%d\n, argc);
}
dimple-lt% gcc -v -g -o simple simple.c
Reading specs from /usr/lib/gcc-lib/i586-mandrake-linux-gnu/3.2.1/specs
Configured with: ../configure --prefix=/usr --libdir=/usr/lib
--with-slibdir=/lib --mandir=/usr/share/man --infodir=/usr/share/info
--enable-shared --enable-threads=posix --disable-checking --enable-long-long
--enable-__cxa_atexit --enable-languages=c,c++,ada,f77,objc,java
--host=i586-mandrake-linux-gnu --with-system-zlib
Thread model: posix
gcc version 3.2.1 (Mandrake Linux 9.1 3.2.1-5mdk)
/usr/lib/gcc-lib/i586-mandrake-linux-gnu/3.2.1/cc1 -lang-c -v -D__GNUC__=3
-D__GNUC_MINOR__=2 -D__GNUC_PATCHLEVEL__=1 -D__GXX_ABI_VERSION=102 -D__ELF__
-Dunix -D__gnu_linux__ -Dlinux -D__ELF__ -D__unix__ -D__gnu_linux__ -D__linux__
-D__unix -D__linux -Asystem=posix -D__NO_INLINE__ -D__STDC_HOSTED__=1 -Acpu=i386
-Amachine=i386 -Di386 -D__i386 -D__i386__ -D__tune_i586__ -D__tune_pentium__
simple.c -quiet -dumpbase simple.c -g -version -o /local/home/bill/tmp/cce1WvLh.s
GNU CPP version 3.2.1 (Mandrake Linux 9.1 3.2.1-5mdk) (cpplib) (i386 Linux/ELF)
GNU C version 3.2.1 (Mandrake Linux 9.1 3.2.1-5mdk) (i586-mandrake-linux-gnu)
compiled by GNU C version 3.2.1 (Mandrake Linux 9.1 3.2.1-5mdk).
ignoring nonexistent directory /usr/i586-mandrake-linux-gnu/include
#include ... search starts here:
#include ... search starts here:
/usr/local/include
/usr/lib/gcc-lib/i586-mandrake-linux-gnu/3.2.1/include
/usr/include
End of search list.
as -V -Qy -o /local/home/bill/tmp/cco543Ws.o /local/home/bill/tmp/cce1WvLh.s
GNU assembler version 2.13.90.0.16 (i586-mandrake-linux-gnu) using BFD version
2.13.90.0.16 20021126
/usr/lib/gcc-lib/i586-mandrake-linux-gnu/3.2.1/collect2 --eh-frame-hdr -m
elf_i386 -dynamic-linker /lib/ld-linux.so.2 -o simple
/usr/lib/gcc-lib/i586-mandrake-linux-gnu/3.2.1/../../../crt1.o
/usr/lib/gcc-lib/i586-mandrake-linux-gnu/3.2.1/../../../crti.o
/usr/lib/gcc-lib/i586-mandrake-linux-gnu/3.2.1/crtbegin.o
-L/usr/lib/gcc-lib/i586-mandrake-linux-gnu/3.2.1
-L/usr/lib/gcc-lib/i586-mandrake-linux-gnu/3.2.1/../../..
/local/home/bill/tmp/cco543Ws.o -lgcc -lgcc_eh -lc -lgcc -lgcc_eh
/usr/lib/gcc-lib/i586-mandrake-linux-gnu/3.2.1/crtend.o
/usr/lib/gcc-lib/i586-mandrake-linux-gnu/3.2.1/../../../crtn.o
dimple-lt% gdb
GNU gdb 5.3-1mdk (Mandrake Linux)
Copyright 2002 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you are
welcome to change it and/or distribute copies of it under certain conditions.
Type show copying to see the conditions.
There is absolutely no warranty for GDB. Type show warranty for details.
This GDB was configured as i586-mandrake-linux-gnu.
(gdb) file simple
Reading symbols from simple...done.
(gdb) run
Starting program: /local/home/bill/Projects/SurfaceFitting/Maths/C/simple
Warning:
Cannot insert breakpoint -2.
Error accessing memory address 0x4000ae90: Input/output error.
The same program may be running in another process.
(gdb) The program is running. Exit anyway? (y or n) y
I don't think the problem is with gdb itself because I built an old
version (5.2.1) and got the same error. I've also tried old versions
of gcc (2.95, 2.96) too.
[Cooker] [Bug 4054] [xfsdump] xfs_fsr works only partially
http://qa.mandrakesoft.com/show_bug.cgi?id=4054 [EMAIL PROTECTED] changed: What|Removed |Added Status|UNCONFIRMED |RESOLVED Resolution||FIXED --- Additional Comments From [EMAIL PROTECTED] 2003-23-07 15:39 --- the xfsprogs for 9.1 got updated: Mandrake Linux Update Advisory __ Package name: xfsprogs Advisory ID:MDKA-2003:017 Date: June 27th, 2003 Affected versions: 9.1 __ acl-2.1.1-1.1mdk attr-2.1.1-1.1mdk xfsdump-2.2.3-1.1mdk xfsprogs-2.3.5-1.1mdk and is also included in current Cooker... -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: I get a lot of these messages on some filesystems with Mandrake 9.1 and Cooker could not pre-alloc tmp space: /home/.fsr/ag0/tmp1650 Workaround. Update these tools to version 2.2.6 from the XFS site
[Cooker] [Bug 4158] [kernel] gdb doesn't work with XFS file systems
http://qa.mandrakesoft.com/show_bug.cgi?id=4158 [EMAIL PROTECTED] changed: What|Removed |Added Status|UNCONFIRMED |RESOLVED Resolution||FIXED --- Additional Comments From [EMAIL PROTECTED] 2003-23-07 15:29 --- This one is fixed in the Cooker 2.4.21-5mdk, and for 9.1 with the 2.4.21.0.24mdk update kernel -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: Attempts to run any program under gdb fail with: [EMAIL PROTECTED] glenn]# gdb t GNU gdb 5.3-22mdk (Mandrake Linux) Copyright 2002 Free Software Foundation, Inc. GDB is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. Type show copying to see the conditions. There is absolutely no warranty for GDB. Type show warranty for details. This GDB was configured as i586-mandrake-linux-gnu... (gdb) r Starting program: /home/glenn/t Warning: Cannot insert breakpoint -2. Error accessing memory address 0x4000af50: Input/output error. The same program may be running in another process. Others (see bug #4000) have noted that this is due to a problem with XFS. I haven't seen this problem on a 9.1 system that uses ext3. It's also been reported that only if the root partition is ext3, and the other partitions are XFS, there is no problem. This problem is in all the kernels since 2.4.21-0.13mdk, and all, including the current 'cooker' release, use the same XFS patch snapshot 2.4.20-2003-01-14_00:43_UTC I've built a clean 2.4.21 kernel, and applied the current patch from SGI SGI XFS snapshot-2.4.21-2003-06-23_01:45_UTC for version 1.3 of XFS, and the debugger works. I suggest that an entry in the 9.1 Errata be made that systems that are to be used for development shouldn't use XFS.
[Cooker] [Bug 3615] [kernel] no acls in XFS
http://qa.mandrakesoft.com/show_bug.cgi?id=3615 [EMAIL PROTECTED] changed: What|Removed |Added Status|NEW |RESOLVED Resolution||FIXED --- Additional Comments From [EMAIL PROTECTED] 2003-23-07 15:32 --- This one is fixed in the Cooker 2.4.21-5mdk, and for 9.1 with the 2.4.21.0.24mdk update kernel -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: I try to assign ACLs in a XFS formatted partition and I fail I've got this message; setfacl -m u:toto:rwx /home/tomcat/ setfacl: /home/tomcat: Operation not supported in the /var/log/dmesg, nothing refer to XFS'ACLs ; SGI XFS snapshot 2.4.20-2003-01-14_00:43_UTC with quota, no debug enabled XFS mounting filesystem ide0(3,6) In Linux-mandrake9.0, no problem ... so.
[Cooker] [Bug 1140] [drakxtools] second ethernet adaptor not recognized at boot
http://qa.mandrakesoft.com/show_bug.cgi?id=1140 --- Additional Comments From [EMAIL PROTECTED] 2003-22-07 19:19 --- ne2k-pci: Realtek|RTL-8029(AS) 8139too : Realtek|RTL-8139 Well... According to your lspcidrake and dmesg , you are using ne2k-pci only for the 10mbit card, and 8139too for your 100mbit card so your /etc/modules.conf need to have: alias eth0 ne2k-pci alias eth1 8139too Thomas -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: ASSIGNED creation_date: description: Actually, DrakConnect was working fine for me. But I don't know where to report the hardware initialization problem solved by DrakConnect. I have two ethernet PCI adaptors. Both are ne2000 compatibles. eth0 is a 10 Mb/s connected to Internet via University LAN and it works fine. eth1 is a 10/100 Mb/s is for a connection with a second PC in my office for Internet sharing. It cannot be set up at boot. Here is the message : SIOCGIFFLAGS no such device failed to bring up eth1 However, by running Drakconnect I am able to set up eth1 card and it runs well. I can ping my other PC. Both eth0 and eth1 are managed by n2kpci module. Here are lspci and lspcidrake report plus dmesg showing the effect of Drakconnect at the end. gpgart : Intel Corporation|440BX/ZX - 82443BX/ZX Host bridge unknown : Intel Corporation|440BX/ZX - 82443BX/ZX AGP bridge unknown : Intel Corporation|82371AB PIIX4 ISA unknown : Intel Corporation|82371AB PIIX4 IDE usb-uhci: Intel Corporation|82371AB PIIX4 USB sonypi : Intel Corporation|82371AB PIIX4 ACPI - Bus Master IDE Controller es1371 : Ensoniq|ES1371 [AudioPCI-97] ne2k-pci: Realtek|RTL-8029(AS) 8139too : Realtek|RTL-8139 Card:ATI Rage 128: ATI|Rage 128 VR AGP 1x/2x unknown : Virtual|Hub [] 00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03) 00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03) 00:04.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02) 00:04.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01) 00:04.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01) 00:04.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02) 00:0a.0 Multimedia audio controller: Ensoniq ES1371 [AudioPCI-97] (rev 08) 00:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8029(AS) 00:0d.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C (rev 10) 01:00.0 VGA compatible controller: ATI Technologies Inc Rage 128 RL/VR AGP Linux version 2.4.21pre3-2mdk ([EMAIL PROTECTED]) (gcc version 3.2.1 (Mandrake Linux 9.1 3.2.1-2mdk)) #1 Thu Jan 23 23:18:06 CET 2003 BIOS-provided physical RAM map: BIOS-e820: - 0009fc00 (usable) BIOS-e820: 0009fc00 - 000a (reserved) BIOS-e820: 000f - 0010 (reserved) BIOS-e820: 0010 - 0fffc000 (usable) BIOS-e820: 0fffc000 - 0000 (ACPI data) BIOS-e820: 0000 - 1000 (ACPI NVS) BIOS-e820: - 0001 (reserved) 255MB LOWMEM available. ACPI: have wakeup address 0xc0001000 On node 0 totalpages: 65532 zone(0): 4096 pages. zone(1): 61436 pages. zone(2): 0 pages. ACPI: RSDP (v000 ASUS ) @ 0x000f5a60 ACPI: RSDT (v001 ASUS P3B_F12336.12337) @ 0x0fffc000 ACPI: FADT (v001 ASUS P3B_F12336.12337) @ 0x0fffc080 ACPI: BOOT (v001 ASUS P3B_F12336.12337) @ 0x0fffc040 ACPI: DSDT (v001 ASUS P3B_F0.04096) @ 0x ACPI: BIOS passes blacklist ACPI: MADT not present Kernel command line: auto BOOT_IMAGE=linux ro root=301 devfs=mount hdd=ide-scsi quiet ide_setup: hdd=ide-scsi Local APIC disabled by BIOS -- reenabling. Found and enabled local APIC! Initializing CPU#0 Detected 451.026 MHz processor. Console: colour dummy device 80x25 Calibrating delay loop... 897.84 BogoMIPS Memory: 256484k/262128k available (1330k kernel code, 5256k reserved, 512k data, 144k init, 0k highmem) Dentry cache hash table entries: 32768 (order: 6, 262144 bytes) Inode cache hash table entries: 16384 (order: 5, 131072 bytes) Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes) Page-cache hash table entries: 65536 (order: 6, 262144 bytes) CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 512K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0383fbff CPU: Common caps: 0383fbff CPU: Intel Pentium III (Katmai) stepping 03
[Cooker] [Bug 3002] [Installation] Mandrake 9.1rc2 does not recognize additional harddrives
http://qa.mandrakesoft.com/show_bug.cgi?id=3002 [EMAIL PROTECTED] changed: What|Removed |Added Status|ASSIGNED|RESOLVED Resolution||FIXED --- Additional Comments From [EMAIL PROTECTED] 2003-10-07 18:31 --- This bug was caused by the missing config_pdc_force in the install kernel... With my modified boot disks the install worked, but the Promise controller won the race over the VIA controller regarding wich ide chipset would be the booting one... This of course messed up the system, since the BIOS was set to use VIA as primary IDE chipset... Then the MDK installer tried to resolve the mess, by adding theese to the lilo.conf: disk=/dev/hde bios=0x81 other=/dev/hde1 label=windows2 table=/dev/hde map-drive=0x80 to=0x81 map-drive=0x81 to=0x80 but obviously it was not the way to go... This bug was fixed by adding the ide=reverse to every append line, and removing the lines above made by the installer,and making changes to lilo.conf and fstab to match the ide=reverse setting... Thomas -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: Trying to install on a computer running Mandrake 9.0. Motherboard is an Asus A7V333 with Promise Raid. I am not using the Raid but have hard drives 2 and 3 plugged in there. When I try to install it only shows the drive on the standard motherboard ide ports. I have Mandrake 9.0 running on a drive on the Promise ide and it has no problem recognizing all the drives. I did not know of any special kernel commands to give since I have never had to do that in the past when installing Redhat or Mandrake. Lee Partridge
[Cooker] [Bug 1647] [kernel] ipsec module problem
http://qa.mandrakesoft.com/show_bug.cgi?id=1647 [EMAIL PROTECTED] changed: What|Removed |Added Status|NEW |RESOLVED Resolution||FIXED --- Additional Comments From [EMAIL PROTECTED] 2003-05-07 10:54 --- This one is fixed in current cooker (2.4.21.3mdk) -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: attempting to start freeswan ipsec and got this in the log saying kernel compiled by gcc v3 but ipsec.o module compiled by gcc v2: Had the the problem with 9.1 beta3 (pre4-1mdk); upgraded to latest cooker kernel (pre4-6mdk) but same problem... Apr 26 16:14:35 localhost ipsec_setup: Starting FreeS/WAN IPsec 1.99... Apr 26 16:14:37 localhost ipsec_setup: /lib/modules/2.4.21pre4-6mdk/kernel/net/ipsec/ipsec.o.gz: The module you are trying to load (/lib/modules/2.4.21pre4-6mdk/kernel/net/ipsec/ipsec.o.gz) is compiled with a gcc Apr 26 16:14:37 localhost ipsec_setup: version 2 compiler, while the kernel you are running is compiled with Apr 26 16:14:37 localhost ipsec_setup: a gcc version 3 compiler. This is known to not work. Apr 26 16:14:37 localhost ipsec_setup: Using /lib/modules/2.4.21pre4-6mdk/kernel/net/ipsec/ipsec.o.gz Apr 26 16:15:00 localhost CROND[1178]: (root) CMD ( /usr/share/msec/promisc_check.sh) Apr 26 16:15:10 localhost ipsec_setup: /sbin/insmod /lib/modules/2.4.21pre4-6mdk/kernel/net/ipsec/ipsec.o.gz Apr 26 16:15:10 localhost ipsec_setup: /lib/modules/2.4.21pre4-6mdk/kernel/net/ipsec/ipsec.o.gz: The module you are trying to load (/lib/modules/2.4.21pre4-6mdk/kernel/net/ipsec/ipsec.o.gz) is compiled with a gcc Apr 26 16:15:10 localhost ipsec_setup: version 2 compiler, while the kernel you are running is compiled with Apr 26 16:15:10 localhost ipsec_setup: a gcc version 3 compiler. This is known to not work. Apr 26 16:15:10 localhost ipsec_setup: modprobe: insmod /lib/modules/2.4.21pre4-6mdk/kernel/net/ipsec/ipsec.o.gz failed Apr 26 16:15:10 localhost ipsec_setup: modprobe: insmod ipsec failed
[Cooker] [Bug 3002] [Installation] Mandrake 9.1rc2 does not recognize additional harddrives
http://qa.mandrakesoft.com/show_bug.cgi?id=3002 --- Additional Comments From [EMAIL PROTECTED] 2003-05-07 22:17 --- Could you send me the files /var/log/dmesg, /etc/fstab and /etc/lilo.conf both from 9.0 and 9.1 if possible. how do you have the system bios set? does it boot from hda first, or from Promise? where do you have lilo bootloader installed? and how do you exactly want your hardware to be recognized? hda= what hardware hdb= what hardware hdc= what hardware hdd= what hardware hde= what hardware hdf= what hardware ... You can send me this info directly to: [EMAIL PROTECTED] Regards Thomas -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: ASSIGNED creation_date: description: Trying to install on a computer running Mandrake 9.0. Motherboard is an Asus A7V333 with Promise Raid. I am not using the Raid but have hard drives 2 and 3 plugged in there. When I try to install it only shows the drive on the standard motherboard ide ports. I have Mandrake 9.0 running on a drive on the Promise ide and it has no problem recognizing all the drives. I did not know of any special kernel commands to give since I have never had to do that in the past when installing Redhat or Mandrake. Lee Partridge
[Cooker] [Bug 3615] [kernel] no acls in XFS
http://qa.mandrakesoft.com/show_bug.cgi?id=3615 --- Additional Comments From [EMAIL PROTECTED] 2003-02-07 10:03 --- Yep. This bug is still valid :-( Even 2.4.21-2mdk still lacks this patch... For the next 9.1 update kernel Vincent is planning to add this, but for cooker Thats Juans choice... -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: I try to assign ACLs in a XFS formatted partition and I fail I've got this message; setfacl -m u:toto:rwx /home/tomcat/ setfacl: /home/tomcat: Operation not supported in the /var/log/dmesg, nothing refer to XFS'ACLs ; SGI XFS snapshot 2.4.20-2003-01-14_00:43_UTC with quota, no debug enabled XFS mounting filesystem ide0(3,6) In Linux-mandrake9.0, no problem ... so.
[Cooker] [Bug 1614] [kernel] Unresolved symbols in aes.o module causes loopback to fail
http://qa.mandrakesoft.com/show_bug.cgi?id=1614 [EMAIL PROTECTED] changed: What|Removed |Added Status|UNCONFIRMED |RESOLVED Resolution||FIXED --- Additional Comments From [EMAIL PROTECTED] 2003-02-07 20:20 --- This one got fixed in 2.4.21-0.pre4.4mdk So I close it. -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: Attempted to upgrade from 2.4.21pre4.2 to pre4.5 and mkinitrd failed. traced it a bit, noticed the block device loop.o wasnt being loaded.. attempted to modprobe, aes.o hit me with a few unresolved symbols. I had to force a manual insmod of the pre4.5 aes.o module so that I could get the loopback device to insmod, so that I could mkinitrd for the new kernel. I am using this bugzilla report so people don't think it's the current kernel with the problem, when it's more than likely the kernel they are currently running... If you can't upgrade your kernel.. do what I did. It will probably work as long as we are still on the same pre4.x kernel... after that, lets hope the devs dont break loop.o and it's child mods (aes.o) again. :)
[Cooker] [Bug 2100] [drakxtools] oss is default for nforce2 audio (and not alsa)
http://qa.mandrakesoft.com/show_bug.cgi?id=2100 [EMAIL PROTECTED] changed: What|Removed |Added Status|UNCONFIRMED |RESOLVED Resolution||FIXED --- Additional Comments From [EMAIL PROTECTED] 2003-02-07 20:30 --- nForce2 audio uses alsa now... closing bug... -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: oss is the default driver for the nforce2 audio; this does not allow multi-channel sound. snd-intel8x0 is in an fact available option in draksound. Once this is set, and the volume has been unmuted and set to a reasonable level, multi-channel sound is possible. Note: I have not put any effort into testing the OSS sound compatibility; and the options suggested on the ALSA site for this card are not appropriate for Mandrake 9.1. This is the relevant lines from /etc/modules.conf: alias snd-slot-0 snd-intel8x0 above snd-intel8x0 snd-pcm-oss Thanks, Damon
[Cooker] [Bug 1557] [Installation] Lilo default waiting time is 0
http://qa.mandrakesoft.com/show_bug.cgi?id=1557 [EMAIL PROTECTED] changed: What|Removed |Added Status|UNCONFIRMED |RESOLVED Resolution||FIXED --- Additional Comments From [EMAIL PROTECTED] 2003-02-07 20:46 --- Installing 9.1 did sets up 10 sec. delay... So I'm closing this bug -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: Lilo default waiting time is 0 This causes that if you have Linux and Windows, you can't choose wich one you want to load
[Cooker] [Bug 2323] [Installation] Unable to detect root partition when upgrading from MDK 9.0 to MDK 9.1 RC1
http://qa.mandrakesoft.com/show_bug.cgi?id=2323 [EMAIL PROTECTED] changed: What|Removed |Added Status|UNCONFIRMED |RESOLVED Resolution||FIXED --- Additional Comments From [EMAIL PROTECTED] 2003-02-07 20:58 --- This one was due to missing config_pdc_force in kernel... It's fixed on my bootdisks at www.iki.fi/tmb/9.1/ and in MDK update kernels... and Cooker ... -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: During the initial stages of the Madrake installer the option to upgrade from a previous version is selected. The installer then asks what keyboard is required, and what security level is needed. After the security level is set, a message appears saying: An error occured: Opps, no root partition found The only button available to click is ok which reloads the error. The PC is currently running Mandrake 9.0, installed on an 80GB drive on a Promise U133 raid controller. A 13GB drive is located on the motherboad's controller, with Windows XP installed. MDK 9.1 Beta 3 exibits the same error, however the error does not occur with the Mandrake 9.0 installer. The partitions on the drive were originally set up automatically by the MDK 9.0 installer. I have tried removing the 13GB drive from the system, but this has no effect.
[Cooker] [Bug 1426] [Installation] hard disks return no response in setup
http://qa.mandrakesoft.com/show_bug.cgi?id=1426 [EMAIL PROTECTED] changed: What|Removed |Added Status|UNCONFIRMED |RESOLVED Resolution||FIXED --- Additional Comments From [EMAIL PROTECTED] 2003-02-07 20:43 --- Closing this bug... The reason for this bug is explained in comment #3 and #4 -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: When running setup, the screen where it attempts to detect the hardware devices on the system... it detects both of my cd-roms OK, but when it goes to check my hard drives, it displays on the screen: hde = no response hdf = no response It looked something similar to that. Afterwards, the setup continues on. I never went through the whole setup b/c I was unsure what problems this no response thing might cause for the setup. I have 2 hard disks in my machine. I am running an athlon xp 2100 cpu, asus a7n8x motherboard with the geforce2 chipset. 512MB RAM. Both hard disks are 80GB.
[Cooker] [Bug 2907] [Installation] Installation via hd.img: second IDE-disk not detected!
http://qa.mandrakesoft.com/show_bug.cgi?id=2907 [EMAIL PROTECTED] changed: What|Removed |Added Status|UNCONFIRMED |RESOLVED Resolution||FIXED --- Additional Comments From [EMAIL PROTECTED] 2003-02-07 21:11 --- This one is due to the missing config_pdc_force in kernel... It's fixed on my bootdisks at www.iki.fi/tmb/9.1/ and MDK 9.1 update kernels and Cooker -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: starting Installation of Mandrake 9.1RC2 from floppy, containing hd.img, only one of my two IDE-disks is detected! I have running Mandrake 9.0 succesfully on the same hardware and this problem didn't occur here. Mainboard:OEM ID: GIGABYTE Product ID: 7VRXP the first disk is connected to the IDE-port, the second to the RAID, but set in BIOS that it is treated like IDE. this is an excerpt from dmesg (Mandrake 9.1 RC1): ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: VIA vt8233a (rev 00) IDE UDMA133 controller on pci00:11.1 ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:pio, hdd:DMA hda: SAMSUNG SV0602H, ATA DISK drive hda: DMA disabled blk: queue c039acc0, I/O limit 4095Mb (mask 0x) hdd: HITACHI CDR-7930, ATAPI CD/DVD-ROM drive hdd: DMA disabled ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 - this is the analogue part from dmesg on the running system Mandrake 9.0: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: VIA vt8233a (rev 00) IDE UDMA133 controller on pci00:11.1 ide2: BM-DMA at 0xfc00-0xfc07, BIOS settings: hde:DMA, hdf:pio ide3: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdg:pio, hdh:DMA hdc: SAMSUNG SV0602H, ATA DISK drive hde: SAMSUNG SV0602H, ATA DISK drive hdh: HITACHI CDR-7930, ATAPI CD/DVD-ROM drive ide1 at 0xdc00-0xdc07,0xd802 on irq 19 ide2 at 0x1f0-0x1f7,0x3f6 on irq 14 ide3 at 0x170-0x177,0x376 on irq 15 hdc: 117304992 sectors (60060 MB) w/2048KiB Cache, CHS=116374/16/63, UDMA(100) hde: 117304992 sectors (60060 MB) w/2048KiB Cache, CHS=7301/255/63, UDMA(100) Partition check
[Cooker] [Bug 3562] [Installation] FastTrak
http://qa.mandrakesoft.com/show_bug.cgi?id=3562 [EMAIL PROTECTED] changed: What|Removed |Added Status|UNCONFIRMED |ASSIGNED Ever Confirmed||1 --- Additional Comments From [EMAIL PROTECTED] 2003-02-07 21:45 --- Have you tried my bootdisks / bootCD and fixes at http://www.iki.fi/tmb/9.1/ -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: ASSIGNED creation_date: description: I just download and thinking at the same time to buy the retail version of MDK 9.1. but I guess that you guys are so eager to introduce a product that still faulty. since version 8.2 all the motherboard with this FastTrak are having the same problem and I know a lot of people are sending you the same bug. I'm trying to convince my peers to use linux specialy MDK brecause it just looks good ( nothing else ) I belive that Linux MDK is the future of OS. but how far can we go like this? Thanks ps RedHat works beautiful from version 7 thru 8 without any problems
[Cooker] [Bug 3002] [Installation] Mandrake 9.1rc2 does not recognize additional harddrives
http://qa.mandrakesoft.com/show_bug.cgi?id=3002 [EMAIL PROTECTED] changed: What|Removed |Added Status|UNCONFIRMED |ASSIGNED Ever Confirmed||1 --- Additional Comments From [EMAIL PROTECTED] 2003-02-07 21:24 --- Have you tried with my bootdisks / bootCD found at http://www.iki.fi/tmb/9.1/ Thomas -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: ASSIGNED creation_date: description: Trying to install on a computer running Mandrake 9.0. Motherboard is an Asus A7V333 with Promise Raid. I am not using the Raid but have hard drives 2 and 3 plugged in there. When I try to install it only shows the drive on the standard motherboard ide ports. I have Mandrake 9.0 running on a drive on the Promise ide and it has no problem recognizing all the drives. I did not know of any special kernel commands to give since I have never had to do that in the past when installing Redhat or Mandrake. Lee Partridge
[Cooker] [Bug 3636] [kernel-source] error in sound/Config.in
http://qa.mandrakesoft.com/show_bug.cgi?id=3636 [EMAIL PROTECTED] changed: What|Removed |Added Status|UNCONFIRMED |RESOLVED Resolution||FIXED --- Additional Comments From [EMAIL PROTECTED] 2003-02-07 22:55 --- This one is fixed by the patches in bug 4060 Juan! You need to apply those patches to the 2.4.21.2mdk... As for the Madge Token Ring..., it's fixed in current Cooker As for the Library routines..., It's not a bug, they depend on a lot of things... (or actually many things depend on them) so for the most part they get autoselected so the system wont break... -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: When I run make menuconfig there is an error just before it displays the menu: Preparing scripts: functions, parsing..scr ipts/Menuconfig: ./MCmenu71: line 54: syntax error near unexpected token `fi' scripts/Menuconfig: ./MCmenu71: line 54: `fi' I am able to scroll back and see the error because I ssh into the server. This error results in me being unable to select the Advanced Linux Sound Architecture menu (under Sound on main menu). This is fixed by: [EMAIL PROTECTED] sound]# diff -u Config.in~ Config.in --- Config.in~ 2003-04-02 12:43:34.0 -0500 +++ Config.in 2003-04-02 12:43:34.0 -0500 @@ -24,9 +24,9 @@ fi # the following will depenend on the order of config. # here assuming USB is defined before ALSA -if [ $CONFIG_SND != n -a $CONFIG_USB != n ]; then - source sound/usb/Config.in -fi +#if [ $CONFIG_SND != n -a $CONFIG_USB != n ]; then +# source sound/usb/Config.in +#fi if [ $CONFIG_SND != n ]; then if [ $CONFIG_SPARC32 = y -o $CONFIG_SPARC64 = y ]; then source sound/sparc/Config.in Also the Library routines menu under the main menu is unselectable. I don't know what causes this. Just my effort to make LM even better.
[Cooker] [Bug 2504] [kernel] promise fasttrak 376
http://qa.mandrakesoft.com/show_bug.cgi?id=2504 --- Additional Comments From [EMAIL PROTECTED] 2003-04-05 15:03 --- could you try out my boot / fix images on: http://www.iki.fi/tmb/Cooker/ and let me know if it works for you... Thomas --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: I still cant find any drivers for the promise fasttrak 376 ata/raid controller. My motherboard is an Asus P4PE, and my hard drive is connected to the raid controller. Mandrake 9.1 RC1 does not have any drivers to support this controller, so I cant install it. It cannot find my hard drive. Can you provide support for this in other releases of Mandrake 9.1?
[Cooker] [Bug 3546] [kernel] Can't use Normal IDE on Raid channels on MSI KT3 Ultra2-R
http://qa.mandrakesoft.com/show_bug.cgi?id=3546 --- Additional Comments From [EMAIL PROTECTED] 2003-04-05 16:27 --- could you try out my boot / fix images on: http://www.iki.fi/tmb/Cooker/ and let me know if it works for you... Thomas --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: I have been using Mdk 9.0 on this motherboard with a modded bios to allow the use of the raid channels as normal ide, for optical drives and hard drives. With Mdk 9.0 it has performed without flaw. First I tried installing Mdk 9.1 RC2. Neither during install nor after install would the Mandrake see the hard drive or the cd burner on IDE3 and 4. It is the same for 9.1 final. Going into the mandrake control center under hardware the only controller that shows up in Mdk 9.0 is the via IDE controller. In Mdk 9.1 both an IDE controller and a promise 20276 RAID controller shows. Yes it is a promise 200276 RAID controller but with Mdk 9.0 it is recognised as an IDE controller and functions as is should based on the bios settings.
[Cooker] [Bug 3518] [Hardware] USB2 module and device detection with nForce2 motherboard
http://qa.mandrakesoft.com/show_bug.cgi?id=3518 --- Additional Comments From [EMAIL PROTECTED] 2003-03-27 10:58 --- This is due to the funny way this board is designed... If you take a look at bootup messages, you will see that one usb controller does not get an irq assigned... Even more fun is that when you run it as usb v1.1, it uses 3 controllers with two ports each... but when you are switching to usb2 it seems that it's running 2 controllers with 3 ports each... Now... This wouldn't be a problem, but in order to get it to work as it should, we need ACPI, and the acpi support for this board isn't ready yet... but... it will be... Thomas PS. I'm posting my kernel later this evening with wich has udma100(133) and firewire support included among other things... --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: I am using an Asus A7N8X Deluxe motherboard with MDK9.1 RC2, Windows 2000 and XP installed. USB devices are: Kodak DC3400 camera, HP DeskJet 970 Printer, Epson Perfection 1250 Scanner (all USB1.1 devices). Problem: With BIOS USB settings set at V1.1 V2.0, Mandrake loads modules usb-ohci and ehci-hcd. No apparent problems in dmesg. However, my USB printer and scanner would be detected on only one of six available USB ports in MDK 9.1 RC2, and the camera would not be detected at all. (I am unsure of whether there was a problem with previous builds). Workaround: On changing the BIOS settings to V1.1 only, and commenting out the ehci-hcd part in /etc/modules.conf, all six USB ports are able to detect device insertion and removal (as seen in USBView); and the camera is now detected and works correctly. In Windows 2000/XP, all ports work correctly for device insertion and removal when the BIOS is set to USB1.1 USB2.0.
[Cooker] [Bug 3548] [drakxtools] eth0 fails to connect
http://qa.mandrakesoft.com/show_bug.cgi?id=3548 --- Additional Comments From [EMAIL PROTECTED] 2003-03-27 12:32 --- if lspcidrake -v tells you that it wants 3c509 for the network, make sure that /etc/modules.conf has a line: alias eth0 3c509 or if it wants 3c59x, make sure the above line states 3c59x instead of 3c509 Since you didn't tell us what hardware you actually have, this is the bast I can do... Thomas --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: [see bug #781 - closed as fixed] I have a 3c509 NIC and have failure to connect to network as in #781. Boot options (noapic and acpi=off), together or separately, make no difference. Have tried manual 'ifup eth0', this also fails. Mdk9.0 works fine, apparently with same module, 3c59x [I see a module 3c509 also present??] and without either of the above boot options. I have 9.0 and 9.1 installed on the same PC and have compared setup as far as I understand, can see no differences.
[Cooker] [Bug 3470] [Installation] 9.1rc2: LeadTek WinFast 7350KDA motherboard, noapic required
http://qa.mandrakesoft.com/show_bug.cgi?id=3470 --- Additional Comments From [EMAIL PROTECTED] 2003-03-21 13:20 --- Viestissä Torstai 20. Maaliskuuta 2003 21:02, jayrusman kirjoitti: well the 9.1 Installer will default to acpi=off, so this won't be a problem... Thomas PS. hopefully we will have better ACPI support in 9.2 ... ;-) --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: USB mouse and PCI network card do not function during install, most likely becaues noapic is not passed to the kernel. Also, after installation, noapic must be manually added to /etc/lilo.conf for most anything to work...
[Cooker] [Bug 3470] [Installation] 9.1rc2: LeadTek WinFast 7350KDA motherboard, noapic required
http://qa.mandrakesoft.com/show_bug.cgi?id=3470 --- Additional Comments From [EMAIL PROTECTED] 2003-03-21 17:37 --- That I know, but the ACPI stuff inthe kernel is known to get in conflict with the APIC stuff... on some systems ... Just an example: I have an nForce2 board that has onboard 3Com network that works only if either I'm running with acpi=off or noapic The idea of ACPI is to tell the system how to use the hardware, including the APIC... On my system the APIC assigns my 3Com to irq21, but the ACPI does not tell the rest of the system where to find the nic, so it does not work... (for now that is..., when we get better ACPI support this will be fixed...) When I run acpi=off the BIOS and APIC is communicating as they should, and the system works... same goes for acpi=on noapic... So yes... if ACPI and APIC does not communicate correctly, you get into trouble So...my question: Have you tried to boot with acpi=off? Does it work? If so... It proves my point... Thomas PS. ofcourse I would like the ACPI stuff to work perfect, perhaps 9.2 will be an ACPI release... But it mostly depends on how the kernel development goes... --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: USB mouse and PCI network card do not function during install, most likely becaues noapic is not passed to the kernel. Also, after installation, noapic must be manually added to /etc/lilo.conf for most anything to work...
[Cooker] [Bug 2923] [kernel] Kernel refuse to boot on a Packard Bell i-media
http://qa.mandrakesoft.com/show_bug.cgi?id=2923 --- Additional Comments From [EMAIL PROTECTED] 2003-03-17 09:13 --- How about: 1. boot into 9.1 beta3 2.install kernel 2.4.21-0.13mdk (dont reboot) 3. make a bootfloppy as root with command: mkbootdisk 2.4.21-0.13mdk 4. boot with the bootfloppy you made... Does it help? Other bootoptions you can try is: ide0=nodma ide0=noautotune mem=nopentium Thomas --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: The current kernel in 9.1 RC2 refuse to boot. It stops after the line: OK Now booting the kernel... I've had the same problem with 8.2 and 9.0 which I never could install. However the problem was gone in 9.1 Beta3 which I succefully installed. It sound like a kernel problems but I cannot apply any patches during boot since the kernel doesn't even start. Not even a single line of output, just the two lines: Uncompressing the kernel... OK Now booting the kernel Then the system just stay in the this state for ever. What sort of extra information would you need to fix this? I've got a 9.1 Beta3 currently running on this machine and everything seems to work fine kernel wise. I have a packard bell i-Media PC with the following component: Processor Athlon XP 1600+ and 256 Mb of RAM. Explorer (MS-6511) motherboard Name: Explorer (MS-6511) rev. 1.0 Type: Flex-ATX motherboard Manufacturer: MSI ATI Radeon VE 32 MB SDR video card Name: Radeon VE graphics card Type: 2D/3D graphics card Manufacturer: ATI Packard Bell USB Activboard keyboard and Mouse
[Cooker] [Bug 2618] [kernel] Installer hangs during boot
http://qa.mandrakesoft.com/show_bug.cgi?id=2618 --- Additional Comments From [EMAIL PROTECTED] 2003-03-17 11:20 --- Viestissä Maanantai 17. Maaliskuuta 2003 05:28, eric kirjoitti: search for Mandrake-devel/cooker/i586 on your favorite mirror... Thomas --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: After pressing Enter to install, the installer hangs. If I hit F1 and use text to boot in text mode, the following are the last lines printed before it hangs: Checking for popad bug... OK. POSIX conformance testing by UNIFIX enabled ExtINT on CPU#0 ESR value before enabling vector: 0002 The system is a brand new ECS K7VMM mainboard, AMD Athlon XP 2100+ processor, 512MB PC2100 (DDR266) ram. All other peripherals (video, network, audio, etc.) all are onboard. I can install Mandrake 8.2 fine. The 9.0 release has this problem. The 9.1 RC1 has this problem.
[Cooker] [Bug 1827] [Hardware] Cannot install on nForce2 SATA drives
http://qa.mandrakesoft.com/show_bug.cgi?id=1827 --- Additional Comments From [EMAIL PROTECTED] 2003-03-17 11:32 --- Could you try with 9.1 RC2... and make sure you boot with acpi=off Thomas --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: System: Asus A7N8X nForce2 with silicon Image sil3112 SATA raid controller on motherboard, 2x Seagate 120G SATA drives configured as a raid 0 array. WIn200 installed in primary partition of 80G. Remaining 160G unused. Hercules Prophet 9700Pro video card. LiteOn 48x24x CDRW. Beta 3 - text install as graphics install has display problems at first screen. (See other bug reports) Installation takes up to 10 minutes to get to first screen. Identifies sil3112 no problem and recogises ACPI is turned on. Stalls at drives sitting on hde and hdg with repeated messages about loosing IRQs. Takes about 1 minute to display each message and repeats itself 5 or 6 times per drive before finally continuing on with boot process. Then locks up at first screen when attempting to access the drives for information. I have tried several things and not been able to get past the first screen. beta 3 is a complete no go on this hardware.
[Cooker] [Bug 3358] [lirc] lirc not correctly creating symlinks for serial devices
http://qa.mandrakesoft.com/show_bug.cgi?id=3358
--- Additional Comments From [EMAIL PROTECTED] 2003-03-17 23:30 ---
Viestissä Maanantai 17. Maaliskuuta 2003 23:24, rkulagow kirjoitti:
When compiling the kernel, it states:
#warning **
#warning Your serial port driver is compiled into
#warning the kernel. You will have to release the
#warning port you want to use for LIRC with:
#warning setserial /dev/ttySx uart none
#warning **
Is this done automatic? if not... should it...
Thomas
--- You are receiving this mail because: ---
You are on the CC list for the bug, or are watching someone who is.
--- Reminder: ---
assigned_to: [EMAIL PROTECTED]
status: UNCONFIRMED
creation_date:
description:
I have a pinnacle systems dumb IR receiver which connects to the COM1 / COM2 serial
port.
The example /etc/sysconfig/lircd file gives the user no indication that they need to
create a
symlink between the actual tty device and the /dev/lirc entry.
Here's a working example:
# Customized setings for lirc daemon
# The hardware driver to use, run lircd --driver=? for a list
DRIVER=pinsys
# Hardware driver module to load
HWMOD=serial
# The device node that communicates with the IR device.
# with devfs enabled
DEVICE=/dev/lirc/1
snip
[EMAIL PROTECTED] dev]# ls -l /dev/lirc/1
lr-xr-xr-x1 root root 10 Mar 15 21:48 /dev/lirc/1 - /dev/ttyS1
It took me about 2 hours to figure this out. I recommend that the lircd file be a
little more
verbose with examples.
Here is an updated /etc/sysconfig/lircd file that I think explains things better.
(Note that the symlink is created correctly when manually installing lirc from a
tarball because
the lirc configure program does this as a part of the installation process)
[EMAIL PROTECTED] sysconfig]# cat lircd
# Customized setings for lirc daemon
# The hardware driver to use, run lircd --driver=? for a list
DRIVER=UNCONFIGURED
# Hardware driver module to load
# Choices are:
# serial
# lirc_serial (for home-brew serial port IR receivers)
# lirc_parallel
# etc. See /lib/modules/{kern-version}/kernel/3rdparty/lirc for a
# list of modules.
HWMOD=UNCONFIGURED
# The device node that communicates with the IR device.
# If you are using a serial device, create a symlink between the actual
# hardware device and the /dev/lirc/ entry
# Example for receiver connected to COM1
# as root# cd /dev
# as root# ln -sf ttyS0 lirc/0
# or as root# ln -sf ttyS0 lirc/serial
# If you are using devfs, use one of the following and create the symlink
# as shown above
# DEVICE=/dev/lirc/0
# DEVICE=/dev/lirc/serial
# Without devfs:
# If you are using a serial device, create a symlink between the actual
# hardware device and the /dev/lirc entry
# Example for receiver connected to COM1
# as root# cd /dev
# as root# ln -sf ttyS0 lirc
# DEVICE=/dev/lirc
# Serial port for the receiver (for serial driver)
# COM1 (/dev/ttyS0)
#COM_PORT=/dev/ttyS0
#DRIVER_OPTS=irq=4 io=0x3f8
# COM2 (/dev/ttyS1)
#COM_PORT=/dev/ttyS1
#DRIVER_OPTS=irq=3 io=0x2f8
# COM3 (/dev/ttyS2)
#COM_PORT=/dev/ttyS2
#DRIVER_OPTS=irq=4 io=0x3e8
# COM4 (/dev/ttyS3)
#COM_PORT=/dev/ttyS3
#DRIVER_OPTS=irq=3 io=0x2e8
[Cooker] [Bug 3047] [Hardware] no module for USR/3COM internal modem 5610
http://qa.mandrakesoft.com/show_bug.cgi?id=3047 --- Additional Comments From [EMAIL PROTECTED] 2003-03-16 10:30 --- Viestissä Sunnuntai 16. Maaliskuuta 2003 06:11, krisbaker kirjoitti: what's the output of lspcidrake -v Thomas --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: The hardware is detected, but the no module message shows in harddrake. This seems like deja vu all over again. I notice that bug 103 referred to the same problem for 9.0-0.2mdk, but it must have been fixed for the final release, because 9.0 works fine.
[Cooker] [Bug 3345] [Installation] Booting Cooker from Promise Ultra 133 ATA Controller fails
http://qa.mandrakesoft.com/show_bug.cgi?id=3345 --- Additional Comments From [EMAIL PROTECTED] 2003-03-16 21:21 --- Try to boot with: linux acpi=off and maybe even: linux acpi=off noapic Thomas --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: I have a new system with Mainboard MSI nforce2 chipset and a Promise Ultra 133 ATA controller. This controller is connected with harddisk /dev/hde and /dev/hdg. Installing Mandrake cooker (2003-03-13) on /dev/hdax from harddisk (sources are on a reiserfs-partition on /dev/hde was successful. When booting this system, it hangs with following error message: lost interrupt hde lost interrupt hde lost interrupt hde lost interrupt hdg lost interrupt hdg . Booting an old Mandrake 9.0 Installation was successful
[Cooker] [Bug 1296] [drakxtools] Failed to setup eth0
http://qa.mandrakesoft.com/show_bug.cgi?id=1296 [EMAIL PROTECTED] changed: What|Removed |Added CC||[EMAIL PROTECTED] --- Additional Comments From [EMAIL PROTECTED] 2003-03-16 23:35 --- Ouch... I noticed that ldetect-lst database has been altered... lspcidrake -v states: 3c90x : 3Com Corporation|3c920 Tornado [NETWORK_ETHERNET] (vendor:10b7 device:9201 subv:1043 subd:80ab) WHO has changed it ... ??? the correct line for the database is: 0x10b7 0x9201 3c59x 3Com Corporation|3c920 Tornado as stated in this message: http://marc.theaimsgroup.com/?l=mandrake-cookerm=104352772601298w=2 This HAS to be fixed before the release... Thomas --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: Drakconnect seemed to detected the nvidia south bridge NIC ok and would tell me that it had written the configuration, however when I tried to bring up eth0 there was nothing there. I appears as if drakconnect is doing everything but actually writing the configuration. System: Athlon 2700+, Asus mobo A7N8X (nforce2), 1G DDR ram, Hercules Prophet 9700Pro video card.
[Cooker] [Bug 3047] [Hardware] no module for USR/3COM internal modem 5610
http://qa.mandrakesoft.com/show_bug.cgi?id=3047 --- Additional Comments From [EMAIL PROTECTED] 2003-03-16 23:50 --- Viestissä Sunnuntai 16. Maaliskuuta 2003 22:15, krisbaker kirjoitti: Take a look at this page: http://www.people.iup.edu/bclg/pci-modem.html it tells you how to use the modem... It does not need a module... Thomas --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: The hardware is detected, but the no module message shows in harddrake. This seems like deja vu all over again. I notice that bug 103 referred to the same problem for 9.0-0.2mdk, but it must have been fixed for the final release, because 9.0 works fine.
[Cooker] [Bug 3328] [harddrake] INSMOD error after running harddrake at boot
http://qa.mandrakesoft.com/show_bug.cgi?id=3328 --- Additional Comments From [EMAIL PROTECTED] 2003-03-15 10:20 --- Viestissä Lauantai 15. Maaliskuuta 2003 10:05, andy.dewhurst kirjoitti: So what is in the syslog? (the error message stated syslog _or_ dmesg ...) thomas --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: On screen message given after upgrading to latest harddrake does not happen on original release of RC2, on screen message is: Hint: Insmod errors can be caused by incorrect module parameters, including IO or IRQ parameters. You may find more information in SYSLOG or DMESG once you have logged in
[Cooker] [Bug 2923] [kernel] Kernel refuse to boot on a Packard Bell i-media
http://qa.mandrakesoft.com/show_bug.cgi?id=2923 --- Additional Comments From [EMAIL PROTECTED] 2003-03-15 22:30 --- Have you tried to boot with: linux acpi=off noapic Thomas --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: The current kernel in 9.1 RC2 refuse to boot. It stops after the line: OK Now booting the kernel... I've had the same problem with 8.2 and 9.0 which I never could install. However the problem was gone in 9.1 Beta3 which I succefully installed. It sound like a kernel problems but I cannot apply any patches during boot since the kernel doesn't even start. Not even a single line of output, just the two lines: Uncompressing the kernel... OK Now booting the kernel Then the system just stay in the this state for ever. What sort of extra information would you need to fix this? I've got a 9.1 Beta3 currently running on this machine and everything seems to work fine kernel wise. I have a packard bell i-Media PC with the following component: Processor Athlon XP 1600+ and 256 Mb of RAM. Explorer (MS-6511) motherboard Name: Explorer (MS-6511) rev. 1.0 Type: Flex-ATX motherboard Manufacturer: MSI ATI Radeon VE 32 MB SDR video card Name: Radeon VE graphics card Type: 2D/3D graphics card Manufacturer: ATI Packard Bell USB Activboard keyboard and Mouse
[Cooker] [Bug 3328] [harddrake] INSMOD error after running harddrake at boot
http://qa.mandrakesoft.com/show_bug.cgi?id=3328 --- Additional Comments From [EMAIL PROTECTED] 2003-03-15 04:49 --- What kernel version? what insmod error? dmesg does not show any insmod error...!!! --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: On screen message given after upgrading to latest harddrake does not happen on original release of RC2, on screen message is: Hint: Insmod errors can be caused by incorrect module parameters, including IO or IRQ parameters. You may find more information in SYSLOG or DMESG once you have logged in
[Cooker] [Bug 3132] [kernel] Network device SIS900 does not connect to LAN or internet (see also bug#: 2525)
http://qa.mandrakesoft.com/show_bug.cgi?id=3132 --- Additional Comments From [EMAIL PROTECTED] 2003-03-11 12:20 --- None of these options helped. As dmesg shows it seems that APIC can not be turned off by the noapic kernel option. Are there more options for APIC? I see that you have acpi=off in your lilo.conf, so those options I gave you does not help... but that is not the problem... this is: sis900.c: v1.08.06 9/24/2002 PCI: Found IRQ 5 for device 00:04.0 eth0: Unknown PHY transceiver found at address 1. eth0: Using transceiver found at address 1 as default eth0: SiS 900 PCI Fast Ethernet at 0xd400, IRQ 5, 00:0a:e6:57:2a:31. could you send the output of lspcidrake -v Thomas --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: As already reported in bug#: 2525 for ML9.1 RC1 this bug is still valid in ML 9.1 RC2. After trying the suggestions in bug#: 2525 I still can not connect to other computers in the LAN. ifconfig shows me correctly the device and pinging the device itself on the same box works out korrectly, but pinging another PC from this box I get a: ping: sendmsg: Operation not permitted. Pinging the device from other computers I get a host not reachable. The SIS900 network device is on motherboard: K7SOM+ with CPU AMD Athlon XP 2000. Thanks for any help!
[Cooker] [Bug 3132] [kernel] Network device SIS900 does not connect to LAN or internet (see also bug#: 2525)
http://qa.mandrakesoft.com/show_bug.cgi?id=3132 [EMAIL PROTECTED] changed: What|Removed |Added Component|libsasl2-plug-ntlm |booting --- Additional Comments From [EMAIL PROTECTED] 2003-03-10 22:18 --- Does it help to boot with: pci=noapic or acpi=off Thomas --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: As already reported in bug#: 2525 for ML9.1 RC1 this bug is still valid in ML 9.1 RC2. After trying the suggestions in bug#: 2525 I still can not connect to other computers in the LAN. ifconfig shows me correctly the device and pinging the device itself on the same box works out korrectly, but pinging another PC from this box I get a: ping: sendmsg: Operation not permitted. Pinging the device from other computers I get a host not reachable. The SIS900 network device is on motherboard: K7SOM+ with CPU AMD Athlon XP 2000. Thanks for any help!
[Cooker] [Bug 3147] [drakxtools] Network card
http://qa.mandrakesoft.com/show_bug.cgi?id=3147 --- Additional Comments From [EMAIL PROTECTED] 2003-03-11 03:20 --- Viestissä Tiistai 11. Maaliskuuta 2003 02:56, labandion kirjoitti: what is the output of lspcidrake -v Thomas --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: C-net network card /Davicom will not work unless you manualy enter dmf in to modules.conf
[Cooker] [Bug 3019] [kernel-source] Cannot rebuild the NVidia src rpms for my NForce motherboard
http://qa.mandrakesoft.com/show_bug.cgi?id=3019 --- Additional Comments From [EMAIL PROTECTED] 2003-03-09 13:50 --- Viestissä Sunnuntai 9. Maaliskuuta 2003 12:43, kenneth.krekula kirjoitti: Do as the error-message states: Make sure that the symbolic link /lib/modules/`uname -r`/build exists and points to the matching kernel source directory anp please place the output of uname -r instead of the 'uname -r' above ... and you actually dont need the whole nForce rpm, only the nvnet part, since every other part is already supported by the kernel... Thomas --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: With RC1 and RC2 I haven't been able to get the network working on my NForce motherboard (MSI K7N420Pro). In order to install the Nvidia NForce driver I need to do an rpm --rebuild of the driver, but it does not work (rebuilding the Nvidia GLX and kernel rpms does work). Yes, I have the kernel source installed. I will attach the error messages here.
[Cooker] [Bug 3058] [Hardware] Nforce2 driver support
http://qa.mandrakesoft.com/show_bug.cgi?id=3058 --- Additional Comments From [EMAIL PROTECTED] 2003-03-09 23:20 --- Viestissä Sunnuntai 9. Maaliskuuta 2003 22:23, waschk kirjoitti: Actually the UDMA support is there, but since the current nVidia driver in the kernel has problem with detecting 80pin cables, it defaults to UDMA33... This is possible to override with the boot-option ide0=ata66... This way we get UDMA100 wich is the highest we can get with the available documentation for now... Thomas PS. In about an hour I'll have a new testkernel out that upgrades the ide subsystem to pre5-ac2, wich has merged the amd74xx and the nvidia driver, to get UDMA100 directly. PS2. About the kernel and the source for building nvidia drivers, the kernel and kernel-source has been in sync for ages... the only problem has been the missing /lib/modules/'uname-r'/build symlink to /usr/src/linux Thomas --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: Problem 2: kernel - nvnet driver not included and compilation impossible without compiling first new kernel since the kernel-source is not for installed kernel!!! This has been with ALL mandrake versions I have used. Please make kernel-source reflect UP kernel (default) so that compilation of additional kernel modules will not require whole kernel compilation/installation. - also nvaudio is missing - Nforce2 IDE only in UDMA(33) mode (Maxtor supports UDMA133). This is SLOW. - Nforce2 drivers not included in the package (would be a good addition since they are getting popular) Configuration: - AMD Duron 1.2, 512Mb, Shuttle XPC SN41G2 Nforce2, Maxtor 120Gb - Fresh MDK 9.1 RC2 installation, no NVIDIA drivers installed
[Cooker] [Bug 3019] [kernel-source] /lib/modules/`uname -r`/build link not present
http://qa.mandrakesoft.com/show_bug.cgi?id=3019 --- Additional Comments From [EMAIL PROTECTED] 2003-03-10 01:30 --- Viestissä Maanantai 10. Maaliskuuta 2003 01:32, bgmilne kirjoitti: This was fixed in this kernel: * Tue Mar 04 2003 Juan Quintela [EMAIL PROTECTED] 2.4.21-0.12mdk - make /lib/modules/version/build link construction work. Thomas PS. What TP-specific device...? source? link? Thomas --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: With RC1 and RC2 I haven't been able to get the network working on my NForce motherboard (MSI K7N420Pro). In order to install the Nvidia NForce driver I need to do an rpm --rebuild of the driver, but it does not work (rebuilding the Nvidia GLX and kernel rpms does work). Yes, I have the kernel source installed. I will attach the error messages here.
[Cooker] [Bug 2922] [kernel-2.4.21.0.12mdk] ALSA output broken on SB16 PCI in current kernel
http://qa.mandrakesoft.com/show_bug.cgi?id=2922 --- Additional Comments From [EMAIL PROTECTED] 2003-03-08 17:01 --- Viestissä Lauantai 8. Maaliskuuta 2003 16:53, aw280 kirjoitti: Could you upgrade to latest kernel (..13mdk) and try again it has alsa 0.9.0rc8a. Thomas --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: As the summary states, ALSA output simply doesn't work on this card in current Cooker kernels. I expect the last ALSA update broke it (it used to work fine). The card uses the snd-ens1371 driver. Any program which attempts to output to ALSA natively freezes as soon as it attempts to play sound, and cannot be exited normally, even ctrl-c fails to work - has to be 'kill'ed. This has been verified with xmms in ALSA mode (using the xmms-alsa plugin), totem, xine with the ALSA plugin, and ogg123 (which attempts to output in ALSA mode by default). However, sound works with the ALSA driver if its OSS emulation is used - i.e., I can get sound perfectly well with any program set to output in OSS mode, using the ALSA driver. None of the programs I checked gave any error output, they just froze. This is quite a popular legacy card. Can't find anything in the ALSA mailing lists about this.
[Cooker] [Bug 2792] [mdkonline] The Mandrake Galaxy welcome screen is not found (Swedish install)
http://qa.mandrakesoft.com/show_bug.cgi?id=2792 --- Additional Comments From [EMAIL PROTECTED] 2003-03-05 23:20 --- Viestissä Keskiviikko 5. Maaliskuuta 2003 22:38, kenneth.krekula kirjoitti: Have you upgraded to latest: mandrake-galaxy-9.1-15mdk It solved a similar bug in the Finnish language... Thomas --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: The welcome page that pops up is not found when using Swedish install. The error message is: An error occured while loading file:/usr/share/mdk/mandrakegalaxy/mdkgalaxy.html: The file or directory /usr/share/mdk/mandrakegalaxy/mdkgalaxy.html does not exist. With US English install it works correctly. /Kenneth
[Cooker] [Bug 2669] [Installation] Could not uncompress second state ramdisk.
http://qa.mandrakesoft.com/show_bug.cgi?id=2669 --- Additional Comments From [EMAIL PROTECTED] 2003-03-04 11:50 --- From: donbrock [EMAIL PROTECTED] | http://qa.mandrakesoft.com/show_bug.cgi?id=2669 | | The kernel messages show: | | 6 end_request: I/O error, dev 03:40 (hdb), sector 1148956 | 4 hdb: status timeout: status=0xc0 (Busy) | 4 hdb: status timeout: status=0x00 | 3 hdb: drive not ready for command | 4 hdb: ATAPI reset complete | 4 hdb: irq timeout: status=0x00 (Busy) | 4 hdb: irq timeout: error=0x00 | 4 hdb: ATAPI reset complete | 4 hdb: irq timeout status=0xc0 (Busy) | 4 hdb: irq timeout: error=0x00 | 6 end_request: I/O error, dev 03:40 (hdb), sector 1148960 | Try to boot with ide1=nodma Thomas --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: When trying to install 9.1 RC1, I get the following error and then the computer just freezes: Could not uncompress second state ramdisk. This is probably a hardware error while reading the data. (This may be caused by a hardware failure or a Linux Kernel bug) The log window shows: * trying to load /tmp/image/Mandrake/base/mdinst_state2.bz2 as a ramdisk * reading compressed ramdisk: IO_ERROR * unsetting automatic The kernel messages show: 6 end_request: I/O error, dev 03:40 (hdb), sector 1148956 4 hdb: status timeout: status=0xc0 (Busy) 4 hdb: status timeout: status=0x00 3 hdb: drive not ready for command 4 hdb: ATAPI reset complete 4 hdb: irq timeout: status=0x00 (Busy) 4 hdb: irq timeout: error=0x00 4 hdb: ATAPI reset complete 4 hdb: irq timeout status=0xc0 (Busy) 4 hdb: irq timeout: error=0x00 6 end_request: I/O error, dev 03:40 (hdb), sector 1148960 This computer has an ASUS A7N8X motherboard with the integrated NVIDIA nForce 2 chipset. It also has an AMD XP 2000 CPU. BTW, I get the same errors when trying to install Mandrake 9.0. I currently have Mandrake 8.1 installed but I installed it on my drive using a different computer.
[Cooker] [Bug 1392] [kdebase] log in as root
http://qa.mandrakesoft.com/show_bug.cgi?id=1392 --- Additional Comments From [EMAIL PROTECTED] 2003-02-27 11:10 --- Viestissä Torstai 27. Helmikuuta 2003 01:43, jayare kirjoitti: It's the same behaviour as WindowsXP, where Administrator account is shown only in failsafe mode... And why do you need to log in as root when you have su and sudo... --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: mandrake 9.1 beta 3 how can i log in as root when i am using grapical interface i can use the users that i made during install i have no possibilty to enter root what is new that i do not know
