[EMAIL PROTECTED] writes:
Evan, K9SQGWeds. 6-20-07
Hi Evan,
We have not met but, Carl Hibbard WD8NHK
Was listening last night, on about 20 ft of lampcord wire, have no antenna
that comes close to being usable even with a tuner for 80 M. You were
Hello to the group,
If anyone needs a readable schematic of the TR4 I have three spare 11 x
17's. You almost hate to fold them.
Thanks to Roger at R and L in Cincinnati. They had a unit with a manual.
(no affiliation)
In the manual was one unusual piece of information and a schematic,
[EMAIL PROTECTED] writes:
What is the serial number printed in the center near the bottom of the
schematic for the TR-4 73, Garey - K4OAH
Garey,
The schematic number ...small print is 966727000
The manual was with TR4 serial number27502
My unit is 19579...older but all appears the
Hi to the group,
T4 is getting there...have the new AC-4R board kit on the AC3 unit and now
when I turn on the rig at least I don't hear the transformer windings bang on.
Board was easy. I had to scrounge a bit for the correct color wires with
the new no wire kit but I did and it
[EMAIL PROTECTED] (mailto:[EMAIL PROTECTED]) writes:
The TR-3 and early TR-4 final cage didn't have a top at all.
Hi Garey,
Several people have advised about the no top, including yourself I believe
on a prior post.
However the one that's presently on the unit had a top as all the slots and
[EMAIL PROTECTED] (mailto:[EMAIL PROTECTED]) writes:
I have a schematic for 19500, It is a large file, high
resolution and designed to print out at 11 x 17. If your email will
allow you to receive a 7-8 MB file I'd be glad to send it to you.
You are on, and I would appreciate it. Tired
[EMAIL PROTECTED] writes:
your AC3 no longer has the test point that mine did (if your had it at all).
Hi Ron,
The only test point indicated was on the high voltage output on my AC3, with
nil to lift.
After you install the board kit you will have three test points for HI, Lo,
and Bias.
In a message dated 7/28/2007 8:41:32 A.M. Eastern Daylight Time,
[EMAIL PROTECTED] writes:
Can you drop the list owner phrase from future posts about the subject
thanks
Thom
I'm sorry Thom,
I sent you a not on the list email.
But that was after I had that question already on the
Hello to the group,
From the Forum
To KA9S who wanted an 8 pin Jones plug to use an RV4 with his TR4C...yep...I
have one.
Tried answering on the forum...but know or remember what my username and
password are
Does anyone out there have a PA cage that would work on my TR4 that they
[EMAIL PROTECTED] writes:
I have a spare cage in good shape but without a top/lid. If that would help
you on your way, you are welcome to it! Mike VA3MR Ottawa
Hi Mike,
Thanks for the reply and the offer...I was feeling down...Its not the
greatest TR4 but ...if your cage is in good
[EMAIL PROTECTED] writes:
Anyone have key parts for the J-38. I need a knurled screw for top of the
post (brass I think) Jim
What comes to mind of course was the war surplus place I picked up mine at
in 1958, but other than that the one place I can think of, if some member
cannot come
In a message dated 10/24/2007 8:24:55 P.M. Eastern Daylight Time,
[EMAIL PROTECTED] writes:
Halo.net [EMAIL PROTECTED] made an utterance to the drakelist gang
--
John Kriner sells a kit which converts the TR-4 frame relay
[EMAIL PROTECTED] writes:
Garey - K4OAH
HI,
You still working on a TR4 cd ?
We've discussed some of what follows before butI need an Elmer.
Hamvention rig w/AC3. SER # 19579
AC3 Install the new power supply board. Now as it turns out I will
probably replace the cable connector PS
Hi all,
OK OK I give...my beat up TR4
All the tubes light upreceives fine...although will need a general
alignment.
When you go to tune up a TR4 by the book...It will not. No increase in
plate current.
Does not matter into a dummy load or on an antenna.
In any case all of the presets
[EMAIL PROTECTED] (mailto:[EMAIL PROTECTED]) writes:
abbreviated excerpt below
The 6GJ5's will work fine... Garey - K4OAH
Hi, TR4 will not tune up...no plate current...have been advised that 6GJ5's
may have to have pin 8 cut off.
Your thoughts.
Carl Hibbard WD8NHK
To the group all who offered assistance I did get it to load up about 1:30
AM this morning
Garey Barrell [EMAIL PROTECTED]
Hi Garey, Yep all of the filiments on the 6GJ5's were working as I advised,
and you accepted as fact.
Did get to the problem, my procedures and the antenna
:
[EMAIL PROTECTED]
Hi Garey, When you get the TR4 repair cd done I presume you will announce
same on the Drakelist.
Looking forward to it.
Carl Hibbard WD8NHK
** See what's new at http://www.aol.com
[EMAIL PROTECTED] writes:
Howard Traxler [EMAIL PROTECTED]
Hello again Howard, This is germain to your original question.
I'm the one that said watch out for the pictures that make things look
better than they are.
Good example was an AC3 power supply that I very recently purchased.
[EMAIL PROTECTED] writes:
Dick I have been allthrough this since about Juneon the Drakelist.
The 6JB6-6JB6A should be interchangeable as long as all tubes are the same
in one transmitter?
The A was just a warmup factor as in quicker if my research was correct.
2. I believe I
In a message dated 11/29/2007 10:40:51 A.M. Eastern Standard Time,
[EMAIL PROTECTED] writes:
buy Sylvania or RCA 6JB6 tubes beside RF Parts? Thank you for any
information. DW Holtman
WB7SSN
Although I have been using another number, and have been having good results
from.
Try the
Hi all,
All of the conversation about L7 amps ( I thought it was an L75 btw) got me
to thinking.
Anyone out there have a piece of garbage (woops- basket case) Heathkit SB200
they would like to clean out of the basement, garage, shack or other place
where it is just taking up space.
Hi all,
TR3-4-4c etc
The sliding plastic freq plate, w/ little red knob. A wave washer goes
over the red knob. I am assuming the washer goes between the clear plastic
and the aluminum front cover ? With the bow on the washer in or out? I have
tried in and the twin edges hang on the
[EMAIL PROTECTED] writes:
Has anyone looked at _http://bama.sbc.edu/_ (http://bama.sbc.edu/) ?
I have
I downloaded a few from there. They are image files with a djvu extention.
Many are in .pdf format, if you use the mirror sight in particular.
73, WD8NHK
Gypsymt34 writes:
Took a fast look..at my available sights.
.
The mirror sight for BAMA _http://bama.edebris.com/manuals_
(http://bama.edebris.com/manuals) (complete list)
The other one I have used is DK Mods_www.mods.dk/_ (http://www.mods.dk/)
You can also get
, [EMAIL PROTECTED] writes:
I thought I'd put it on the bench tonight -- anyone have any hints
before I dig in?
unplug your key or close the contacts.
**See AOL's top rated recipes
(http://food.aol.com/top-rated-recipes?NCID=aoltop000304)
[EMAIL PROTECTED] (mailto:[EMAIL PROTECTED]) writes:
BTW, how does one label the crystal switch positions on an R4x? Dan, K8WV
My daughter (teacher) has a small battery powered label maker that you can
change the tape and colors on, and change the sizes of print which will just
fit the
Hello to the group,
Looking for ideas before I really start to tear things apart.
The subject say's it allTR4 will not loadnow most of the time. I
have brought this up before .When it does load its between 150 180 Watts
to the dummy load as per a W4. .
Now you'd have to know
[EMAIL PROTECTED] writes:
I have two Radio Shack 115VAC cooling fans that I would like to mount
(without modification) on my R-4C, and my T-4XC
Hi,perhaps
Think about running them on a line cord that goes x ft away. Have a outlet
(or two) in box with a switch in switch out of
[EMAIL PROTECTED]
(mailto:[EMAIL PROTECTED]) writes:
cooling fans
Forgot to mention. Have a neoprene foot pad/rubber in each corner and just
lay up on the top of the PA cage or on the rt center ish of the R4. In that
manner you can use or not. Suck the air out, and the last comment
[EMAIL PROTECTED] writes:
soldering tips for a Wen
My last two for my 100 watt Wen were filed down other brandsfunction
tips.
You might try _www.McMaster-Carr.com_ (http://www.McMaster-Carr.com)out
of Chicago, and for that matter _www.grainger.com_ (http://www.grainger.com)
Hi All,
Was looking through old emails to the list and ran into the above subject
Morse key.
H
I have one of those somewhere.Turns out to be an old Lionel
J-38...anyone got a spare old sliding lock lever (switch) preferably with
knob. I
would like to use it for our Drake stuff
Hi to the group,
Well out of aggravation and frustration my TR4 is on the shelf...now has
developed internal popping noises not caused by anything I'm
doingAAAGGG
So I tackled the TR4C.
Got it all cleaned up, everything seems to check out as much as I can.
Receives fine, even
Hi all,
Cleaning out ...stuff...
Who among the list is a Swan devotee who might like a small piece of
memorabilia ? Am looking for a collector, not a seller.
Carl WD8NHK
**Start the year off right. Easy ways to stay in shape.
[EMAIL PROTECTED] (mailto:[EMAIL PROTECTED]) writes:
I'll have to keep this in mind. The relay in my TR-3 is an open
frame relay screwed down to a small metal base where all the
feed through caps are. I believe the later TR-4 changed this;
but I'm not sure as I don't (yet :-) have a
[EMAIL PROTECTED] writes:
just bought a home-made power supply--that you all no doubt have seen--for
the drake transmitter line. It has a Jones female plug hanging from it.
Wonder if someone could tell me how to count the pins and what I should find
on each one? Would like to know that
[EMAIL PROTECTED] writes:
It would need the rectangular cutouts for the pushbuttons, so that would
mean it would likely be custom made or NOS. David Wd9cmd
If you have to go that route I have seen several products from
_Http://www.frontpanelexpress.com_
In a message dated 1/18/2008 1:45:55 P.M. Eastern Standard Time,
[EMAIL PROTECTED] writes:
I'd like to align my TR-3. By crystal calibrator signal, do they mean to
use the internal calibrator to tune the rig to precise frequencies?
That's the way my TR4 manual reads to me, using a
[EMAIL PROTECTED] writes:
Also, could use suggestions on best ways to clean the chassis. Thanks-73
Lew K1NDV
Hi,
Can't help with the switch.
By cleaning do you mean dust dirt removal ? If so rubbing alcohol, or
denatured alcohol and Q-tips.
Others recommend Windex on paper towels.
[EMAIL PROTECTED] writes:
What is more frustrating is there appears to be no information about what
the drake transceiver wants for mic impedance.
Rich,
My TR4 book says high impedence.
If you go to the Drake musium on line all three of their mic's are shown as
accessories, click on the
Hello to the group,
I really don't feel like going through the archives for this one.
Earlier this month (Jan '08) someone was working on a TR3, as I recall, and
broke the plastic adjust screw off of a pot on the side of the unit, can't
really remember which one.
Is that party still looking
[EMAIL PROTECTED] writes:
Yes indeed! It is I. I broke the shaft off mine. Do you have a
replacement? I'd be happy to pay a fair price for it or trade for a tube or
other
item. Rich Carter
Rich, It would be out of a TR4 chassis but I suspect still the same per the
schematics, I
[EMAIL PROTECTED] writes:
I broke the anti-vox adjustment pot. This is a 500K pot. It has a black
plastic shaft.
Rich on a TR4 the VOX pot is 500 K the Anti VOX is 100k. Yes you could
swap the plastic shaft but to do so you have to remove anyway. Please verify
which one and
In a message dated 1/30/2008 3:37:30 P.M. Eastern Standard Time,
[EMAIL PROTECTED] writes:
Tnx for an info or reply.
I7RUX, Joe
I can tell you that Don Garrett WA9TGT who had an online store no longer
had the parts ...he was/is in Muncie, Indiana, and closed down his supplies in
+/-
[EMAIL PROTECTED] writes:
Ron Baker WB4HFN and got his answering service. I requested an email from
him if he is alright.Jim/NW5F
He came up on the Drake net last Sunday as I recall.
Carl WD8NHK
**Start the year off right. Easy ways to stay in shape.
[EMAIL PROTECTED] writes:
Alan,
was thee ever a SERVICE MANUAL for the 4B series as with the later radios?
Alan KB7MBI
Don't know but the sponsor of this list had the information on his WB4HFN
(.com) page it was Drake service cd put out by K4OAH. I keep waiting for the
TR4 series.
[EMAIL PROTECTED] writes:
Sunday, 2000 Zulu, 7238mhz Tuesday, 2000 EST 3.865mhz
Terry K7WLD
Terry, those are correct , Carl WD8NHK
FWIW I have not had a problem with AOL chopping things off
indiscriminately. Could it be the way you have your spam blocker set up?
Hi all,
FWIW
Was doing some antenna checking while the wx gave me a temporary warmup
yesterday.
Had two pieces of RG8--w/PL259's and a coupling in the middle run out to an
antenna.(for inserting my W4). To make things waterproof I had
wrapped with a silicone base tape, and gone
[EMAIL PROTECTED] writes:
Would someone who knows T4X's tell me if an R4 PTO was ever used. It would
seem to me that someone has swapped it out or replaced just the can cover
with same.
Carl WD8NHK
**Ideas to please picky eaters. Watch video on AOL Living.
Carl -When did I write that???
73, Garey - K4OAH
Garey, sorry, you didn't, my error, the way I pulled up the Drakelist send
to address was one of your old answers to an entirely different thing. I
believe I meant to use you as the send to.
carl
**Ideas to please picky
[EMAIL PROTECTED] writes:
Any idea who that was?? 73, Garey - K4OAH
Garey and group.
Original item 10-20- 2007 on archives...Jim Shorneyemail address n/a
said that he found a replacement metera series of emails...in response he
gave his supplier to W1FMR
There is an
Hi Chris,
I tried to email a thank for your response to my SB200 questions, but it
bounced on your .com.
In any case thank you, as I can see you've been there.
73 Carl WD8NHK
**Ideas to please picky eaters. Watch video on AOL Living.
[EMAIL PROTECTED] writes:
EP Swynar [EMAIL PROTECTED]
To Ed VE3CUI a nice home brew item with lots of time spent drilling holes
for xtal sockets, and enough small wiring to give you a headache. Not bad
especially as it does what you want.
I had thought about doing the identical thing
[EMAIL PROTECTED] writes:
I meant 12.6 is for 1.5 mhz
That's what I have. Carl WD8NHK
**It's Tax Time! Get tips, forms, and advice on AOL Money
Finance. (http://money.aol.com/tax?NCID=aolprf000301)
[EMAIL PROTECTED] writes:
so crystals for the R4C will work in an older R4?
BIll
[EMAIL PROTECTED] (mailto:[EMAIL PROTECTED]) wrote:
[EMAIL PROTECTED] (mailto:[EMAIL PROTECTED]) writes: I meant 12.6 is for
1.5 mhz
That's what I have. Carl WD8NHK
MAY NOT ! you asked
[EMAIL PROTECTED] (mailto:[EMAIL PROTECTED]) writes:
No the xtals used in the R-4 have a wider pin spacing than those used in the
R-4C.
73, Bob VE3XM
Bob, I really don't mind as Bill had his answer from me too, but I never
said his xtals R4c would fit an R4...His orig que. was
[EMAIL PROTECTED] (mailto:[EMAIL PROTECTED]) writes:
Lorne Barber said:
First the TR7 .friction ?
Then Joe said
Someone on the list may have more specific information as to after what
serial number the mod was no longer required or instructions for doing it in
the field.Joe, K9HDE
Hello to the group,
One to many.
For sale TR4 # 19579
Fully functional, new 6GJ5 PA's ...now with a full PA cage, Drake plug in
relay board, and new relay installed.
New blue light filters, all crystals, all original knobs, atypical rust
spots on chassis. original feet, non original
[EMAIL PROTECTED] writes:
QST for January 2008 it is...thanks...
Just a reminder to all, and there are various pictures of it on line, both
AC4 AC3.
That kit works nicely on an AC 3 (I have two).
Carl WD8NHK
**It's Tax Time! Get tips, forms, and advice on AOL
[EMAIL PROTECTED] writes:
what impedance for R4 headset ? Chuck, K1OM
My actual R4 manual suggests 600 ohm. I would infer that to be lo ohms.
Carl WD8NHK
**Create a Home Theater Like the Pros. Watch the video on AOL
Home.
[EMAIL PROTECTED] writes:
6JB6A being an acceptable replacement to the 6JB6. I have a nice TR-
6 that seems a little low on output and thought I would try replacing
the final tubes...
Archives in October/November/ maybe December 2007 covered in detail.
The two tube numbers you have above are
[EMAIL PROTECTED] (mailto:[EMAIL PROTECTED]) writes:
AC4
Frank
Considering that the AC3 AC4 were used to power the TR4's and T4x's
perhaps it would be easier to get out a TR4 manual and look up power
requirements.
Those would be the max's. and at least give you a clue.
The R4 series
[EMAIL PROTECTED] (mailto:[EMAIL PROTECTED]) writes:
What’s the website address for this INRAD place? Terry K7WLD
5 seconds on a subject search Terry ? ? ! !
Inrad filters
_www.qth.com/inrad_ (http://www.qth.com/inrad)
**Create a Home Theater Like the Pros. Watch
[EMAIL PROTECTED] writes:
Can anyone help me find a TR-4CW 500k VOX GAIN POT?
Thanks in advance,
Randy
W7CPA
Randy , TR4C ( vox ) pot is the dual ganged R98/R74 xmit gain...both 500K
ohm both labeled xmit gain.
The xmit gain on a TR4 is also a dual pot and is also an R98/R74
That
[EMAIL PROTECTED] writes:
Appreciate any recommendations. thanks Wade
I'd use contact adhesive. Hair dryer would get it back off in the future if
I had to.
**It's Tax Time! Get tips, forms and advice on AOL Money
Finance.
[EMAIL PROTECTED] writes:
What bugs me is the people who trace a problem down to a certian board, then
replace the board. Ever hear of FIXING the darn board?
Wish they would send me all their bad boards, I could fix them and make some
money on e-Pay.
-Jim
Well Jim, I'm not a TR7 or RV7
[EMAIL PROTECTED] writes:
Byron WA5THJ.
My TR4 with the original (fixed) relay would not pull in originally. After
cleaning the relay points it wouldn't release as you describe. After
putting the VOX VOX delay pots mid range and on the third cleaning it did
work ...sometimes. If
[EMAIL PROTECTED] writes:
I also need a set of plastic end strips! John. GI3KDR
John, Archives within the last two weeks had the source information on 7
line end plastic pieces.
Carl Hibbard WD8NHK
**Wondering what's for Dinner Tonight? Get new twists on family
favorites
[EMAIL PROTECTED] writes:
Terry. Electronicplus.com in California will have it . Their shipping
charges are high. Mouser.com may also have it. John. GI3KDR
Terry's listing says no longer available. A google search supplied that
address.
I do not think Mouser had it either.BTW
[EMAIL PROTECTED] writes:
I was cautioned by one person there to have the power supply checked first
(good idea). I'm wondering if there is anyone who rebuilds these with modern
circuit boards to eliminate bad cap problems?
Have three of the power supply's with the Heathkit shop's
Hi all,
Am sneaking in here, xyl is on a somewhat warpath with time spent over
latest black box from hamvention Hang in there with me Garey K4OAH I may
get
to work on that T4XB at 2 AM.;She hasn't spotted that there are two other
pieces..I think I'm in for a rough summer.
Hi all,
For those with experience in regards to dipole and inverted v antennas.
I do not have enough length available for an 80 M dipoleI do however
have enough room to run to wires from our chimney into my back yard with about
92 ft one way and 95 ft plus at another angle. This would
Hello all,
Anyone around Ohio have the equipment to properly align W4's and an MN4C ?
Would really prefer to have the MN4C corrected first.
Using my TR5 and not changing anything, working into a dummy load (oil can).
One W4 (which I think I trust) shows 90 W ...was not driving full tilt,
[EMAIL PROTECTED] writes:
I cut erected a zip cord dipole based on 80-meter dimensions, I plan to
use it to-morrow with my rejuvenated Drake T-4X --- alongside the R-4 ---
outdoors, under the gazebo, WX permitting...
Are there any regular informal hang-out frequencies / times used
[EMAIL PROTECTED] writes:
Hi Eddie,
I cut erected a zip cord dipole based on 80-meter dimensions, I plan to
use it to-morrow with my rejuvenated Drake T-4X --- alongside the R-4 ---
outdoors, under the gazebo, WX permitting..
Good luck and I hope you are comfortable on the gazebo.
.Are
[EMAIL PROTECTED] writes:
Garey Barrell [EMAIL PROTECTED]
Thanks for the information and thought train Garey, have both a 10M ohm and
a 20M ohm VOM
that's a decent start.
73'sCarl WD8NHK
**Get the scoop on last night's hottest shows and the live music
scene in your area
[EMAIL PROTECTED] writes:
Garey Barrell [EMAIL PROTECTED] made an utterance to the drakelist gang
--
Carl -
If you have a VTVM or DMM with a 10-11M input impedance, all you need is
an RF probe.
Sorry folks, tired, sent to the list not the printer.
Carl
**Get the scoop on last night's hottest shows and the live music
scene in your area - Check out TourTracker.com!
(http://www.tourtracker.com?NCID=aolmus0005000112)
Well let me get my $.02 in here...
Folks in regards to this particular seller on ebayI really do think he's
being honest. This R4B and all of the rest of his stuff... are
undoubtedly unused,.BY HIM
Carl WD8NHK
**Get the scoop on last night's hottest shows and
[EMAIL PROTECTED] (mailto:[EMAIL PROTECTED]) writes:
To aadelma who ever you are
snips
Can anybody recommend a decent DMM ... Something with a fair sized display
for my aging eyes would be great. I don't need laboratory accuracy, just a
reliable instrument.
On a personal basis I
[EMAIL PROTECTED] writes:
You might want to keep your eyes open for one of the Heath VTVMs
Hi Garey,
And somewhere on the internet was rebuilding instructions (or have it done)
for the probes I believe I found the article somehow through the drakelist.
Carl WD8NHK
**Get
Hi to the group,
Anyone out there have the instruction set up sheets for what is apparently a
Hornet TB 500 tri band antenna hidden away in a filing cabinet or other
available source.
Appreciate any help.
Carl Hibbard WD8NHK
**New MapQuest Local shows what's happening at your
Hello to the group,
Has anyone out there installed a Hy-Gain MK80 adapter (80 meter top loading
coil setup) on top of their Hy-Gain 14AVQ (10-490 meter) VerticalNote
this is a non WARC setup.
If you have how much did you have to trim the 40 metier capacitor hat?
Roughly.
Did you
Hello to the group,
Off the subject a bit perhaps, but.
I have only Really been into Drake equipment for about a year and a
half. Read the archives etc.
Purchased some items from Don Garrett WA9TGT when he was still making his
Drake replacement pieces and he gave me a piece of advise
[EMAIL PROTECTED] (mailto:[EMAIL PROTECTED]) writes:
I Need a 200 ohm pot for the S meter zeroing circuit . It is R 70 in both
the TR 3 and the TR 4. It is TAB mounted ...John k5pgw
Yes John I have you covered, contact me.
Now looking for the East Coast person that wanted an MN 2000
To the group, I erased Johns email address or would have sent this direct.
Hi John,
Hope your potentiometer arrived safely.
I do not have a relay in my parts TR4,
Hope the information on the Drake/ John Kriner circuit board and plug in
relay made sense and is of use.
There was a ham who
rcle...@erols.com writes:
Bob WW3QB
Bob,
You are looking for a ham who was on the Drakelist from Halo.net with the
pcb mod to a TR3. It will be in the archives perhaps July or Aug of 2007.He
had the description and the write up of his projects.
The bulb deal was also on the
_cptc...@flash.net_ (mailto:cptc...@flash.net) writes:
Curt said
If you dont get any other info, I know how to make one. Basically a blank
glass and a reverse image waterslide decal from inkjet/decal paper. Just need
a
scan of a 2b dial glass.Curt KU8L
Anybody ever tried this
Hi to the group,
Anyone out there got a spare 1N295 diode ,that they want to part with?
Else if you have purchased lately from what source if you would share that
information.
Carl Hibbard WD8NHK
**A Good Credit Score is 700 or Above. See yours in just 2 easy
steps!
Hello to the group,
Am working with my TR 5.
Initially used a R.S. fan but was way to noisy.
Read the archives. Evan K9SQG said he used 220 V. ...soo
A Boxer 230 V. with ball bearings Pewee starts and runs fine.
Still to noisy. Made neoprene washers for the metal to metal mount...no
help.
I
Hi to the group,
On an MN4c antenna tuner.
Well I have now had my first ever diode (a 1N295) that was a partial open ??
and another shorted ?
under load BTW all of the components checked good even with the board out
of circuit and the 68 ohm lifted
MN4C that maxed out on the pot would only
Is there anything sacred about a 1N295? K4RV
Typical GE I suppose except perhaps for the 500 mA surge.
But I know they work correctly and that's sometimes what counts.
Carl wd8nhk
**The year's hottest artists on the red carpet at the Grammy
Awards. AOL Music takes you there.
loren...@verizon.net writes:
Anyone have a source for the S-310-CCT and S-312-CCT power connectors?
Loren - WA3WZR
Loren, what do they fit as in application, I am presuming these are Cinch
connectors. Have you come up with perhaps a pic of what the pin / socket
setups are.
Carl-
Hello to the group,
First? Does anyone have an MN2000 parts rig ?
Oh yes; I still have a spare cabinet for one, will need refinishing, but a
great big black cabinet.
Second? Did the unit come with an aluminum top side cover when out of the
cabinet. The holes are all drilled and tapped,
Ok all, to those of you who have responded already a thank you.
I have to make a cover or ..
Wait and see if anyone responds that has a parts unit.
Carl WD8NHK
**A Good Credit Score is 700 or Above. See yours in just 2 easy
steps!
Hi to the group,
For those of you who have a PS7 looking at the metal grate cover on the
top...would you call it black or like mine a dull OD (olive drab) brown-ish.
Carl WD8NHK
PS for those of you who remember my MN2000 ? as to whether it had an inner
coverthe answer was yes...and now
k4...@mindspring.com writes:
abby...@juno.com wrote:
. any help would be appreciatedThanks Kay N5LUI
Kay, as Garey said 1N295 diodes are somewhat hard to find.. Your situation
was mine about a month or so ago. Found two sources online. Used
_www.surplussales.com_
n3...@verizon.net writes:
But if it is not what should we as hams do ???
Well if it were me and this was real I'd make sure the ARRL was aware of it.
Have them do a pass on the ARRL computers to find attorney's that were hams
in the effected area.
Then someone is going to have to
Hello to the group,
Anyone out there have a basket case MN2000 laying around. Don't need
cabinet or caps.
Carl WD8NHK
**Great deals on Dell’s most popular laptops – Starting at
$479
Am planning to sell my B line. Before I use ARRL or Ebay I thought of the
list. Do not need to sell but am not using it.
R4B # 15033 (G xtal) with a flull rack of accy xtals.
T4XB #18911 (Bxtal) including cabling.
AC-3 power supply with Mikes/Heathkit board mod.
MS4 speaker
All in nice
Hi all,
TR7 ...new to me.about 2 hrs. (was functional per a picture)
Yeah Yeah that's why I'm selling the B line...no comments please.
Also got stung on an MN2000 which you can you tell from my emails.
Digital readout non functional except for the dot...as in 7268 (dot) 00
DR7 board and Aux
1 - 100 of 161 matches
Mail list logo