http://notice.abettorusa.com
Unknown
___
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist
Nice Drake TR4, MS4 Speaker, and AC4 power supply. The AC-4 power supply has
had the electrolytic capacitors replaced. Local pick-up or I will meet halfway
within a reasonable distance from my QTH. $350. Email me if you have questions.
73, Gary
What is a nice TR 4 + solid state Ps. worth? KE8NP___
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist
Huh?
From: "Wrayhamishfisher Fisher" <wrayhamishfis...@gmail.com>
To: Drakelist@zerobeat.net
Sent: Monday, January 2, 2017 8:43:13 AM
Subject: [Drakelist] (no subject)
Hi looking for sum one in the kent how nows tr7 as it
Hi looking for sum one in the kent how nows tr7 as it needs sum woark on it
___
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist
Looking to buy a 2-CQ and a 2-NB thank you and 73
smiley...@aol.com
___
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist
Sent on the new Sprint Network
___
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist
___
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist
___
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist
referral program http://goldenmax.ru/134604.php
From: john.roccaro 9/3/2013 4:17:06 PM
___
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist
referral http://bso-site.nl/ocomehmi/tati.php
Sent: 8/27/2013 10:45:48 AM
From morry.ham
___
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist
referral program http://turkuaz-gmbh.com/749211.php
From: john.roccaro 8/25/2013 5:29:12 AM
___
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist
Looking for few part for my new Drake components - (TR-4C w/ 34-PNB
*Noise*Blanker,
TR-4Cw, RV-4C, 2ea AC-4, DC-4, MN-4, MS-4, Shure 444D, Astatic Noice
Cancelling hand mic) New to the BoatAnchor world, like the nostalgia of
tubes.
Need the following: MN-4 Push to Set-Release for VSWR Knob,
Make M0ney 0nline Fast
http://www.omiags.org/httptyr7eaz-1.php?binFriendID=630
Thu, 7 Jun 2012 14:29:58
__
_Fig.6Application of the Gyroscope. (c) colleen windsor
___
Drakelist mailing list
Drakelist@zerobeat.net
- Original Message -
From: gypsym...@aol.com
To: drakelist@zerobeat.net
Sent: Friday, April 13, 2012 10:42 PM
Subject: Re: [Drakelist] (no subject)
Hi all,
Just checking, have not seen any messages since Apr.7., checked the archives
to verify that It didn't seem
Hi all,
Just checking, have not seen any messages since Apr.7., checked the
archives to verify that It didn't seem to be me related. Carl wd8nhk___
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist
=^_^=
http://www.yorksmith.co.uk/wp-includes/friends.php?black169.html
===
Success is the ability to go from failure to failure without losing your
enthusiasm. (c) Prime Minister Winston Churchill
2/10/2012 8:46:18 PM
Terry Biernacki
Hi,
Thanks guys for the great response. All very similar. :-)
It's just what I did to my Yaesu FTDX-400 in 1972. The thing got so hot
that you could fry an egg on it. Then I bought a fan, Papst, real robust
German thing. The finals were probably cooler than the rest of the rig.
BOth fan and rig
Kris -
Yeah, good point! You mean AM is not related to a FS: R-4B and T-XB?? :-)
73, Garey - K4OAH
Glen Allen, VA
Drake 2-B, 2-C/2-NT, 4-A, 4-B, C-Line
and TR-4/C Service Supplement CDs
www.k4oah.com
Kris Merschrod wrote:
Hey guys/gals, how about changing the subject line to fit the
http://eliamagana.com/modules/mod_wdbanners/like.php?photo126.jpg
___
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist
.. http://njzion.org/friends.php?aluckyid=o4oa
___
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist
.
--
From: Kevin Elliott kg...@yahoo.com
Sent: Sunday, November 06, 2011 7:29 PM
To: badg...@ticon.net; danpvalde...@yahoo.com;
diletta...@mikedaisey.com; drakelist@zerobeat.net;
ft-950-ow...@yahoogroups.com; ham-radio-del...@yahoogroups.com;
i...@heilsound.com
Subject: [Drakelist
. http://philippemuyl.fr/friends.php?oppage=yaexo
___
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist
There is a rather straight forward mod for the Johnsons to allow them to cover
160. Somewhere I have the article. Does require some work and potentially a
12volt supply if you use relays vs switches. Unfortunately, it mods/butchers a
classic tuner unit, but if you can stand doing that.
7:18 am
Subject: Re: [Drakelist] (no subject)
There is a rather straight forward mod for the Johnsons to allow them to cover
160. Somewhere I have the article. Does require some work and potentially a
12volt supply if you use relays vs switches. Unfortunately, it mods/butchers a
classic
...@earthlink.net wrote:
From: Steve Wedge w1es1...@earthlink.net
Subject: Re: [Drakelist] (no subject)
To: K9sqg k9...@aol.com, wd8...@yahoo.com, drakelist@zerobeat.net,
w...@yahoogroups.com, k...@yahoogroups.com
Date: Monday, October 3, 2011, 12:18 PM
#yiv265622571 {font-family:Geneva, Arial, Helvetica
I have a Drake R-4C with several of the Sherwood mods. It came to me
in non-working condition. The radio looks pretty clean, BTW, but the
PD-4 board was removed from the receiver, for some reason. The
installation of the mods looks a little rough, i.e. probably not done
by Sherwood. I could dope
Hi, everyone -
Everyone on HF eventually needs a good high-power tuner (unless you're
operating QRP, but even then, the high-power tuners have the least loss).
What I have right now that may interest you is a Murch UT-2000B. This is a
roller-inductor transmatch that does 160-10m. The caps
Interesting thing ,the last 2 or3 do not have the info on the bottom.wonder
why???
Bud W0HG
___
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist
Oops, you are sure right, Bud!! Man, am I wrong twice in the same evening
New high for me. (or low)?? I think the rules are the same though, just
follow the Drakelist link.
73,
Don___
Drakelist mailing list
Drakelist@zerobeat.net
Continuation from last night:
If I attempt to run a R4A from a pure sine wave 130 watt inverter, can I ruin
the inverter or just blow a fuse? If it's just a fuse, I give it a try.
___
Drakelist mailing list
Drakelist@zerobeat.net
Does anyone know if Toni Mills the man who sells front panel is still in
business need one for the R-4C T-4CX.
Thanks all
73, Wolf VK3WY___
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist
Am I the only one who is getting lots of duplicate posts from the list
,(same sent times??? May be my stupid mail program??
Bud W0HG
___
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist
Thanks to everyone for the overwhelming response for my Drake equipment.
Everything is sold with the exception of a FF-1 fixed frequency adapter.
Asking 45 shipped.
Thanks You T Ross___
Drakelist mailing list
Drakelist@zerobeat.net
Found a couple of more items.
TR4C Chassis. No tubes otherwise complete. Was a working rig. 75.00 OBO
FF-1 Fixed Frequency Adapter. average condition, as is. 45.00 OBO
Spoken for. Thanks Ron. WB1HGA1- TR4 Very close to collectors quality.
Comes with speaker, power supply and Ext. VFO.
The best place where you can find everything you need!...
http://roxanarao.com.ar/links.php?zegoogleId=04e4
___
Drakelist mailing list
Drakelist@zerobeat.net
It depends. If there are interfering stations nearby, it would help to have a
narrow filter. If clear conditions, an 8 kc filter would improve the fidelity.
Do you mean an 8 pole filter or an 8 khz filter? Why would 8 pole be 8 kc?
___
All Drake Q-multipliers worked with the IF frequency. The q-multiplier
cabinets also typically had a speaker in them for the rig.
Was a cable run from the 2-AQ to the receiver? Where did it plug in?
___
Drakelist mailing list
It plugs into a 4 pin socket on the back of the receiver.
On 3/6/2011 7:10 PM, Neil M Califano wrote:
All Drake Q-multipliers worked with the IF frequency. The q-multiplier cabinets
also typically had a speaker in them for the rig.
Was a cable run from the 2-AQ to the receiver? Where did it
They went into a 4-pin socket similar to the calibrator socket, only on the
back apron of the radio (at least this is where it is on the 2B).
--- On Sun, 3/6/11, Neil M Califano cchange...@yahoo.com wrote:
From: Neil M Califano cchange...@yahoo.com
Subject: [Drakelist] (no subject
___
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist
Hi to all Drake fans:
Do you think the Drake R-4C could be modified to accommodate one of these two
class A audio amps and the graphic equalizer?
At present I don't have the schematics for these products.
Here are the three links to look at:
, W9AC
- Original Message -
From: Chuck Pool
To: drakelist@zerobeat.net
Sent: Wednesday, December 01, 2010 11:55 AM
Subject: [Drakelist] (no subject)
Hi to all Drake fans:
Do you think the Drake R-4C could be modified to accommodate one of
these two class
Tom,
You won't get output in the non-X posn. in Tune or CW modes, only in
SSB. That's the way it is. Do you get output in the non-X posn on SSB
when you whistle into the mic? If so, then things are OK. If not, then
maybe a filter is bad, or the carrier osc. is not centered properly.
73,
I must be fairly lucky. I've shipped through UPS for years and have not had
any
problem. We have a local UPS Store here that does an exceptional job packing
radios. Every time I have shipped a rig, the recipients always comment on the
great packaging. On another note, I was looking at Rob
On Wed, 29 Sep 2010 13:58:34 -0700 (PDT), Hunter Ellington wrote:
I was looking at Rob Sherwood's Receiver data and noticed that the TR7 and R7
seem to be about equivalent in receiver performance. Am I correct in this
assumption, assuming that the two rigs are equivalently equipped?
I
How do you post to this list?
___
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist
You just did, Francis. It's as simple as addressing your email to
drakel...@zerobeat.net. It's nice to put a subject line in though, as some
on the list delete all messages with no subject. Welcome to the list.
73,
Don, WB5HAK
___
Drakelist
Happy Father's Day to the list. I acquired a pristine Drake R-7. I am looking
for the matching speaker. Does anyone have one they would part with?
Alternatively, can anyone tell me what they go for these days? I looked at
Ebay, but there were no listings. Thanks to all.
WB9NJB R. Hunter
Good evening to the list. I am a returning member with a question. I just
acquired a nice FS-4, but it did not come with the injection cable. Will a 24
run of RG8X terminated with RCA plugs work for this purpose?
WB9NJB R. Hunter Ellington
303-454-0543/720-560-8139
P.O. Box 44
Larkspur, CO
Hey Don, and to the Group --
Funny Story - but a good one too.
Often times, in the past I have questioned why I have more than one radio -
setting
here in the radio room, gathering dust, when I turn on my ole' favorite to
chase DX
on CW or to listen to the 3915 swap net on Sunday Morning.
Hi,
Does anyone know of a source for plastic feet of the type used on the Drake 4
series? I'm looking for the type held on by a screw in the center.
Thanks, John NT8C
Penny Stock Jumping 2000%
Sign up to the #1 voted penny stock
___
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist
Chuck -
No, that is not right. I would suggest checking the setting of the
Preselector end to end travel and the adjustment of the slugs in the
moveable rack. The dimensions are given in the manual, and are measured
from the top edge of the white coil form.
The typical situation is that
Hi to all:
This is a T4X-C question. I have a C-Line and I am giving the T-4XC an
alignment (R-4C too).
(1) 80 meters challenge: 80 meters has lower output than all the other
bands. I noticed three of the four alignment trimmer capacitors on the left
side of radio (T-4XC) are
ROGER DALE WILLIAMS
HI, I HAVE SOME DRAKE RADIOS THAT I WOULD LIKE TO REPAINT! CAN ANYONE TELL ME
WHERE I CAN FIND PAINT THAT WILL CLOSELY MATCH? THE RADIOS ARE A 2-B R4-A AND
T4X. THANKS AND 73 ROGER
___
Drakelist mailing list
: [Drakelist] (no subject)
ROGER DALE WILLIAMS
HI, I HAVE SOME DRAKE RADIOS THAT I WOULD LIKE TO REPAINT! CAN ANYONE
TELL ME WHERE I CAN FIND PAINT THAT WILL CLOSELY MATCH? THE RADIOS ARE A
2-B R4-A AND T4X. THANKS AND 73 ROGER
Hello,
I need a bottom cabinet cover for a Drake R-4B. I do have two extra
cabinets on hand that are the same physical size. These have
differient side cut-outs (notches for controls) that will not fit my
R-4B's chassis. As a last resort, I could modify one of these bases
to fit my R-4B.
: [Drakelist] (no subject)
I'm looking for a fan to install on the back of my TR4 to keep the tubes cool.
Thanks
Bill
--
___
Drakelist mailing list
Drakelist
That is what I do. I use a 24VDC computer fan and run it at 12VDC. Effective
and quiet. Be sure to have it blow upward.
73,
Bob WW3QB
--- On Fri, 5/29/09, Kris Merschrod k...@merschrod.net wrote:
From: Kris Merschrod k...@merschrod.net
Subject: Re: [Drakelist] (no subject) cooling fan
@zerobeat.net;
Kris Merschrod k...@merschrod.net
Sent: Friday, May 29, 2009 9:55 AM
Subject: Re: [Drakelist] (no subject) cooling fan for Drakes
That is what I do. I use a 24VDC computer fan and run it at 12VDC.
Effective and quiet. Be sure to have it blow upward.
73,
Bob WW3QB
--- On Fri
and their application to social change and development
- Original Message - From: Robert Ladden
rmlad...@yahoo.com
To: yellowbankslady yeloe...@frontiernet.net;
drakelist@zerobeat.net; Kris Merschrod
k...@merschrod.net
Sent: Friday, May 29, 2009 9:55 AM
Subject: Re: [Drakelist] (no subject
Mount a small 3 inch 12 volt fan on the back of the PA cage, the holes match up
without any modification to the cage. Take 12 ac from the filament supply
somewhere under the chassis and run it through a diode to a small electrolytic.
The size of the electrolytic will actually decide the fan
On Fri, 29 May 2009 17:26:18 -0400, Gary Poland wrote:
Mount a small 3 inch 12 volt fan on the back of the PA cage, the holes match
up without any modification to the cage. Take 12 ac from the filament supply
somewhere under the chassis and run it through a diode to a small
electrolytic. The
I'm looking for a fan to install on the back of my TR4 to keep the tubes cool.
Thanks
Bill___
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist
Hello, I just received two tr4's a tr4 and a tr4c. tr4 has a 1/4 mic jack,
tr4c has the stock jack. I'm looking to get them on the air so I need
microphones for both of them all-the-while wanting good audio. Any good ideas
let me know I'm new to the Drake sport any information at this
___
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist
Title: Message
John has a new email address.: [EMAIL PROTECTED]
Lanny N0JZ
-Original Message-From:
[EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of [EMAIL PROTECTED]Sent: Saturday, January 21, 2006
2:33 PMTo: drakelist@www.zerobeat.netSubject:
[drakelist
N9PTZ Dan [EMAIL PROTECTED] made an utterance to the drakelist gang
--
Thanks everyone. All of the gear is sold, again thanks.
--
Submissions:
Lars E. Pettersson [EMAIL PROTECTED] made an utterance to the drakelist gang
--
On 09/27/2005 12:09 AM, [EMAIL PROTECTED] wrote:
I acquired a mint TR7A. However, it did not come with a power supply. I
have an opportunity to
Hi Randy!
There are some substantial differences between the PS7 and the PS75. Basically, PS7 will deliver25A, and PS75 just 15A. I have pasted below the general descriptions of both, for reference.
If I was you, I would go for the PS7. If you are not completely happy with the cosmetics, I don't
I would recommend the PS7. Very good supply,
with common parts if it needs repair.
73,
Don, WB5HAK
Hi,
I acquired a mint TR7A. However, it did not come with a power supply.
I have an opportunity to purchase a PS7 in good condition or a PS75 in mint
condition. I am told that both PS will work and are equivalent in output.
I would appreciate any advise.
Thanks, Randy KC2LLV
Hi Guys,
I have an otherwise mint MN75 but it is missing the chrome knob insert on
the AF switch (smaller of the two inserts that the sets use). Anyone have a
source for getting replacements.
Thanks,
Randy F/KC2LLV
billgoodwin [EMAIL PROTECTED] made an utterence to the drakelist gang
--
I am trying to get my old TR4 back on the air. I seem to be putting out
a good rf as shown on my old Philmore SWR meter but am told that my audio
is
unsubscribe [EMAIL PROTECTED]
--
Submissions:[EMAIL PROTECTED]
Subscribe: [EMAIL PROTECTED] - subscribe drakelist in body
Unsubscribe:[EMAIL PROTECTED] - unsubscribe drakelist in body
Hopelessly Lost:
76 matches
Mail list logo
