I want my signal to show me on my P3 where I am transmitting split. 73,
Jim KG0KP
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
On 4/17/2014 22:53, Nr4c wrote: Well it's out of league.
that's also how I feel. Waa over my head.
Are you sure the mode is either DATA A or FSK D?
Not sure where I find a Mode named FSK D on the K3.
--
Bob KD7YZ
AMSAT LM 0901
http://www.qrz.com/db/KD7YZ
www.denstarfarm.us/LGD
Bob,
DATA A, AFSK A, PSK D, and FSK D are data submodes. Set the mode to
DATA, then hold the DATA MD button and the current data submode will be
displayed. Rotate VFO B to change it.
See the K3 manual page 31 - Data Mode Selection.
73,
Don W3FPR
On 4/18/2014 7:29 AM, Bob KD7YZ wrote:
Not
Slava,
Congrats on the P3. I love mine with the P3SVGA board installed. Not only
can I find and work the pile-ups, I can also easily show visitors to my
shack what band conditions look like and where the big signals are, using
the external monitor.
I also have a W2. I will share, from my
On 4/17/2014 23:02, Don Wilhelm wrote:
Bob,
Does the same thing happen if you operate into a dummy load?
Ah Don W. , Perfect as ever!
I put the Dummy-Load onto KAT500 ANT#3 and stepped through the bands,
initiating a Tune on each. Then I transmitted Tx-Data mode and was
able to get the 50
When split, the band-pass indicator for VFO B turns red. What more could you
ask?
Sent from my iPhone
...nr4c. bill
On Apr 18, 2014, at 7:15 AM, Jim Miller jimmil...@stl-online.net wrote:
I want my signal to show me on my P3 where I am transmitting split. 73,
Jim KG0KP
It's a sub-mode of DATA mode. Press and hold the AFX button to show digital
sub-modes in VFO B portion of display. Rotate VFO B knob to change mode.
Sent from my iPhone
...nr4c. bill
On Apr 18, 2014, at 7:29 AM, Bob KD7YZ kd...@denstarfarm.us wrote:
On 4/17/2014 22:53, Nr4c wrote:
Bob,
The best current mode chokes I know about are the ones you can make
yourself - featured in Jim Brown's K9YC Tutorial on RFI. See
http://audiosystemsgroup.com/RFI-Ham.pdf See page 29 for some photos.
You can get the FT240-31 toroid cores from Diz at
http://www.partsandkits.com/
You may
Hi Wayne,
I have one question.
Is it possible to use KX3 + PX3 combination together with KXPA100?
I have ordered one PX3 already.
73 Ruchan Ozatay, TA2AH
__
Elecraft mailing list
Home:
Ruchan,
I am not Wayne, but I can answer that with a YES.
73,
Don W3FPR
On 4/18/2014 8:34 AM, Ruchan Ozatay wrote:
Hi Wayne,
I have one question.
Is it possible to use KX3 + PX3 combination together with KXPA100?
What are these red LEDs that are flashing inside my new P3?
It's been proven that the guys at Elecraft are using alien technology in
their products. In the recent words of a famous personality in DC: You
don't want to go there buddy!
73' Charlie k3ICH
I see.
Well, that's what i pretty much figured: it must be the flux capacitor that is
flashing, right?
Does it need a firmware update?
Slava B
W2RMS
On Apr 18, 2014, at 8:46 AM, Charlie T, K3ICH pin...@erols.com wrote:
What are these red LEDs that are flashing inside my new P3?
It's
Slava,
Congrats on the P3. I love mine with the P3SVGA board installed. Not
only can I find and work the pile-ups, I can also easily show visitors to
my shack what band conditions look like and where the big signals are,
using the external monitor.
I also have a W2. I will share, from my
HI,
Yes, Almost all CW operations. The K3 rx is quiet, and as such makes
even SSB operation nice... The thing is a dream on CW.
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
for
Possibly the best option for the K3 (beyond a good set of filters) has to
be the KRX3 sub receiver, in my opinion.
I have found this especially helpful in quickly and easily finding the
worked station for split operations. With all of the W1AW/x operations this
year--most of them running
Need some help. I have made several PSK, RTTY, MFSK and Domino contacts
using FLDigi but I am only able to get about 18 watts of output out of
the K3 even though the K3 is set to 100 watts. My set up is a K3,
MicroKeyerII and FLDigi(3.21.81). The K3 is set to Data A, FLDigi is
configured
When I purchased my K3 I also ordered the sub receiver, all was good.
Then I ordered a P3 recently.
What a lethal combination for working split operation dxpeditions. The
sub receiver is absolutely great, the P3 add's the visual side of things
and makes it even better.
If I could have only
If you are split only a 100 Hz or so the red line will hide behind the green.
If you are split too far the red line may be off the edge of the screen.
Otherwise it should be there. I'm not aware of an option to turn it off/on.
The P3 has revolutionized the way I work in a pileup!
73,
Brian,
Windows maintains a separate output level for *every program*. Open
Windows Volume Mixer, select the Headset Earphone (microHAM CODEC)
output, place fldigi into transmit (generating audio) and adjust the
slider marked fldigi-AA8R to drive the K3 to 4-5 bars of ALC.
73,
... Joe, W4TV
On
I had just noticed those lines but didn't think they were necessarily the
transmit freq as I was in CW and the line wasn't at 600 as I would have
expected. Figured it was new for something but did not further research
them at the time. I had my width wide to see the pileup and with it in the
I've purchased knobs for my K2, K3, and KX3 from _www.73cnc.com_
(http://www.73cnc.com/) .
They even modified a K2 knob to fit my K3 VFO B shaft. Much better than
the smaller VFO B knob!
And all my knobs have the ball bearing spinner dimples.
No
Perhaps, I would like to share some experience.
I set VFO AB 'LINK' and use both main and sub receivers receiving the same
frequency. Even both receivers are using the same 'main' antenna, I notice a
much earier copying of the signal. By turning and balancing the outer and
inner knob of the
Randy,
I suspect that you are not driving the audio sufficiently.
You would first set the K3 to DATA A mode. Connect the MicroKeyer II to
the K3 line in and line out jacks in the rear. Then consult the
MicroKeyer manual to be sure you have it configured for Line level
output (I believe the
Hi Jim,
We see a lot of similar questions on the reflector. Self experimentation is
probably the best method for you to fully understand the use of the P3 with
respect to VFO B and split operation. Just remember the three cursor colors.
VFO-A is green. VFO-B is magenta. When you are transmitting
Early model (#321) displays ERR I01, indicating MISO line stuck low (asserted).
I can't find any reference to 'MISO line' in the manual. Any help would be
much appreciated.
73,
Ken ZL1AIH
From: elecraft-requ...@mailman.qth.net
On 4/18/2014 07:42, Don Wilhelm wrote:
Bob,
DATA A, AFSK A, PSK D, and FSK D are data submodes.
I am in Data-A
--
Bob KD7YZ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
wikipedia says MISO is a bus logic signal
MISO : Master Input, Slave Output (output from slave).
https://en.wikipedia.org/wiki/Serial_Peripheral_Interface_Bus
now what that means to your situation someone else will have to tell
you, I'm clueless. Is this happening when you are trying a
On 4/18/2014 08:25, Don Wilhelm wrote:
You may want to put them at the antenna feedpoint,
If your feedline runs away from
the antenna perpendicular to the radiator for at least 1/4 wavelength,
Kinda seen in the picture I put, at the bottom of others, on QRZ (link
below).
450-ohm line
On 4/17/2014 9:29 PM, Slava Baytalskiy wrote:
Its no LP-Pan/NaP3, i tell you that
The P3 is QUITE powerful once you set up the buttons and learn how to
use it. As with most gear, RTFM is a great start. :)
First, always use averaging mode, with long averaging times, and set the
screen so
On 4/18/2014 5:25 AM, Don Wilhelm wrote:
You can get the FT240-31 toroid cores from Diz at
http://www.partsandkits.com/
This is a pretty expensive way to buy them -- even the 10 piece price is
double his cost. If you need these parts (and most of us do), you might
try to organize a group
Some of you are aware that l've been dealing with medical issues for
several weeks. I'm back home from the hospital and slowly getting back to
work. (:-)
I received kind messages from many of you wishing me a speedy recovery.
Thank you!
I've asked Elecraft for the loan of an empty PX3 cabinet
Hi Jim,
In answer to your question:
I am new at split. Can I run split using my second receiver for the
transmit freq?? Then narrow the receive width on the transmit
frequency vfo so the line would be where it belongs???
Thanks, 73, Jim KG0KP
Yes. When you are in Split, the VFO B
On Apr 18, 2014 12:19 PM, Rose elecraftcov...@gmail.com wrote:
On Apr 18, 2014 12:17 PM, Rose elecraftcov...@gmail.com wrote:
Some of you are aware that l've been dealing with medical issues for
several weeks. I'm back home from the hospital and slowly getting back to
work. (:-)
I
Yes.
73,
Wayne
N6KR
On Apr 18, 2014, at 5:34 AM, Ruchan Ozatay roza...@outlook.com.tr wrote:
Hi Wayne,
I have one question.
Is it possible to use KX3 + PX3 combination together with KXPA100?
I have ordered one PX3 already.
73 Ruchan Ozatay, TA2AH
Hello,
playing around with the new P3 and K144XV, I've realized that I have
many carriers spaced roughly 30 kHz, which are also audible in the K3
(so probably not a bad K3-P3 coax). See the top screenshot in this image:
https://www.dropbox.com/s/t29sf9bwfpedspa/vhf-carriers.png
When I move the
Hi!
News: http://vehiclemaintenancelog.net/nu/friend.php
n2...@aol.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
The indicated site was blocked as a fraudulous attempt! Beware!
Probably not really N2ZDB,,,
73
Richard - HB9ANM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
My personal rule for safer computing - Never click on an email that
contains only a link. It does not matter who sent it - be safe, it's a
jungle out there.
73,
Don W3FPR
On 4/18/2014 4:21 PM, Richard wrote:
The indicated site was blocked as a fraudulous attempt! Beware!
Probably not really
Chances are good, since it is a PHP site, that the rather porous security of
PHP has been exploited, and they are using the site to deliver root kits.
A nasty. That's assuming it isn't just a click by shooting that took over his
email.
KK4QDZ - Now with Extra Class Priv's, and a tiny KX3 to
On 6m I notice a noise source just above or to the right of my vfo
frequency. The noise moves with the vfo. The peak is almost S2. It
traces an nice blue line.
Anyone know what this might be? I don't see this on any other band.
--
Mike W0MU
Randy, I had a similar situation.
After many tries and tests the problem was that the audio cables - although
expensive - were of bad quality.
Just using another set I was able to have the full output.
73
Reinaldo, YV5AM
On 4/18/2014 10:21 AM, Randy wrote:
Need some help. I have made several
Well, for what it's worth: I've had my P3 for about a year now, and
I've found that how one operates it is highly personal and takes some time.
Function Keys: Mine are all SPAN selections, 4 [for looking at a single
signal's spectrum, 20 [almost always my choice for CW], 50 [CW/RTTY in
I want to know the answer as well because I notice the same as yours.
73 Johnny VR2XMC
寄件人︰ W0MU Mike Fatchett w...@w0mu.com
收件人︰ elecraft@mailman.qth.net elecraft@mailman.qth.net
傳送日期︰ 2014年04月19日 (週六) 5:15 AM
主題︰ [Elecraft] P3 or K3 oddity
On 6m I notice a
Mike and Johnny,
In CW mode, set the P3 for the narrowest Span (2 kHz), then use the
cursor to find the difference in frequency between the VFO and the
spurious signal. That will be the clue as to its source.
73, Jim K9YC
On 6m I notice a noise source just above or to the right of my vfo
The peak is about 2khz away.
Mike W0MU
On 4/18/2014 5:15 PM, Jim Brown wrote:
Mike and Johnny,
In CW mode, set the P3 for the narrowest Span (2 kHz), then use the
cursor to find the difference in frequency between the VFO and the
spurious signal. That will be the clue as to its source.
Thanks for everyone's input on their P3 usage patterns!
Very helpful.
Just read the manual cover to cover (again) and set my new P3 up to what seems
to be good for now.
You know what would be a good addition to the firmware? I think it would be
nice if the last used FN button would be
I use a macro based on ZL2IFB's suggestions:
RT0;XT0;FR0;DV0;BW0040;SWT13;SWT13;UP4;SB1;BW0100;MN111;MP002;MN255;
It is assigned to PF1 (RIT button), you can do the job with K3 utils.
It copies the actual frequency to VFO B, moves the VFO 1 UP, sets on the
corresponding filters. Now you
Check the K3 manual there are some good button programs included like up
2 up 5 and cleanup which will take you out of split.
Mike W0MU
On 4/18/2014 8:01 PM, Martin Kratoska wrote:
I use a macro based on ZL2IFB's suggestions:
On 4/18/14 at 5:10 AM, n...@widomaker.com (Nr4c) wrote:
When split, the band-pass indicator for VFO B turns red. What more could you
ask?
Well, having operated at least once not split when I thought I
was split because I didn't notice the difference between magenta
and red, having the
What do you know, teasers have made their way to the list...
73,
Scott, N9AA
On 4/18/14 7:15 PM, Jim Brown wrote:
Mike and Johnny,
In CW mode, set the P3 for the narrowest Span (2 kHz), then use the
cursor to find the difference in frequency between the VFO and the
spurious signal. That
On Apr 17, 2014, at 9:23 PM, Phil Wheeler w...@socal.rr.com wrote:
Err .. KXPA100!
On 4/17/14, 9:08 PM, Phil Wheeler wrote:
The obvious fix is to satisfy your KX3's craving by adding a KXPA3 :-)
73, Phil
Aaaah! So you mean it is the KX3 that craves and not what is between the PTT
51 matches
Mail list logo
