Mike,
I think that the second antenna port (without a tuner) was not high on
the list of the designcriteria when the K3 started off. Changing a full
grown product and full grown production line now is not wise. Not that
it cannot be done, but how much must one invest to get this done and how
Guys,
On the other hand, there nothing wrong with trying to characterize the
beastie you have as best you can. If for no other reason to see if
something changes with time and how much.
Also, how does my kit comparing to other kits which presumable have
similar but not identical
Hi Gary, group, Elecraft support,
I think I have found a strong correlation between CW in SSB not
working and the QRQ setting. Here follows:
To make CW in SSB work: set CONFIG:QRQ to OFF, power-cycle the K3.
To break CW in SSB: set CONFIG:QRQ to ON, power-cycle the K3.
73,
Frank PA4N
At
According to latest info on the DXpedition's Clublog page,from N2OO:
All logs have been uploaded except for one small log which must wait
until the team returns to the mainland. I do not know what band/mode or
specific timeframe log is on that laptop but it was from February. The
log is not
Arie,
What you are requesting is easier to implement externally. I for one think
there are too many options. I need to cut internal AF switching to A-b, A-A,
b-b. It takes too long to cycle through all the switchig AF options when in
the contest. So I will implement what I need externally
Cannot believe that unless the factory and especially the girls on the LL's
have gone on strike, or theirs been a natural disaster.
Even at 4k miles away, I always get a reply within hours.
One reason i guess why we ALL choose Elecraft products, The service is
exemplary!
Ken..G0ORH/ M3i
Hello:
I have completed my AF-1 audio filter and am impressed with its performance. I
want to put it into an enclosure. I'm aware of a nice unit made by W8FGU but,
for aesthetic reasons, I'm interested in something different. Does anyone know
other options for the filter? I'd optimally like
Igor,
Antenna switching is also very easy to implement outside the K3 or any
other trx. Still transceivers and also the KAT3 tuner are delivered with
2 antenna ports.
Just let me explain and share with everybody how I switch the K3 audio
and why I donot want to do this 'outboard'.
During the
I meant SubRX connector here instead of RX Ant
Op 8-2-2012 16:10, Arie Kleingeld PA3A schreef:
snip During the last CQ 160 CW at PI4D I had the main transmitting antenna
connected to the K3 Ant1 and a receive antenna to the RX ant connector. snip
Hi Jacob,
I have several W8FGU enclosures. He -think- he can make them from
different colors of plastic.
I have a W1 enclosure with smoked sides and a clear front, for example.
73!
Ken Kopp - K0PP
elecraftcov...@gmail.com
On Wed, Feb 8, 2012 at 3:01 PM, jacob chambers
It's no doubt an unwarranted bias of mine, but personally I tend to
discount the rants from people who post in all caps and expect
satisfaction in less than 24 hours. Just say'n
Dave AB7E
On 7 Feb 2012, at 21:33, Larry effectiveh...@bellsouth.net wrote:
I HAVE BEEN HEARING ABOUT
Enough said. Let's get back to the subject in hand.
--Original Message--
From: David Gilbert
Sender: elecraft-boun...@mailman.qth.net
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] No Response From Elecraft
Sent: Feb 8, 2012 12:11
It's no doubt an unwarranted bias of mine, but
I have an assembled KDSP-2 board that I don't need. I purchased it in hopes I
could install it in my older K2, but more upgrades are necessary than I am
willing to doso, I am putting it up for sale..asking $200.00 shipped to
CONUS..I accept Paypal. Please respond to n...@juno.com. Thanks
Arie,
my comments below:
Antenna switching is also very easy to implement outside the K3 or any
other trx. Still transceivers and also the KAT3 tuner are delivered with 2
antenna ports.
It does not mean this feature is used often. I sometimes (very seldom) need
antenna tuner but almost
The shift control selects upper or lower sideband when in AM -s mode.
73,
Bill AF4B
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
I made some inquiries and it seems to be unstuck, though I don't know if
someone fixed it or if it fixed itself.
Leigh/WA5ZNU
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Reflector-seems-stuck-on-Feb-05-tp7262232p7266832.html
Sent from the Elecraft mailing list archive
The link does not work... Can you check that you posted the correct one...
Regards,
Adde, SM0SHG
--
View this message in context:
http://elecraft.365791.n2.nabble.com/k3-configuration-tool-tp7263861p7266899.html
Sent from the Elecraft mailing list archive at Nabble.com.
Oups... Sorry... Found the correct link down the page...
Adde
--
View this message in context:
http://elecraft.365791.n2.nabble.com/k3-configuration-tool-tp7263861p7266905.html
Sent from the Elecraft mailing list archive at Nabble.com.
Given the lack of response to N8CEP's recent WTB Reflector message, we are
curious if there's sufficient interest to warrant another production run.
FYI, although 700 Hz was originally requested by CW ops who felt that 1000
Hz was too wide and 500 Hz too narrow, digital mode enthusiasts have since
My feelings exactly I won't even read any e-mail in all caps they all
get deleted.
Elecraft is the best period is my experience, I removed my 20 year old
Y tattoo
when I got my k3 and did a side by side, only thing the ft2k was good
for was to
hold up the k3 to just the right height.
Let's end this thread.
It turns out the customer had a typo and sent the email to the wrong
email address. We are now in sync.
(Also, when replying to Digest postings, please delete ALL of the digest
from the reply.)
73,
Eric
List moderator
---
www.elecraft.com
On 2/7/2012 7:21 PM, Anndel
FOR SALE:
Selling the KIO2 and KAT2 together didn't fly, so I am pricing them separately:
(1) KIO2 Aux. I/O module is $55 shipped USPS CONUS
(2) KAT2 20-watt internal antenna tuner is $90 shipped USPS CONUS
(3) KAT100 Automatic antenna tuner is $125 (w/connecting cables) shipped USPS
CONUS
Just received the email shipping notification from Elecraft - my KPA-500 is on
its way and is scheduled to arrive on Valentine's Day. What a great present!
73,
H. Cary, K4TM
LYNCHBURG VA
h3c...@gmail.com
__
Elecraft mailing list
Home:
on the Elecraft web site under 'Firmware + S/W'
http://www.elecraft.com/software/elecraft_software_page.htm
under 'Logging and Control Software for the K3 and K2'
http://www.elecraft.com/k2_remote.htm
3rd entry is labeled as:
K3_EZ Manager by N2BC Includes: Band stack 'registers' - with AGC
Just curious is there any word on when the first KX3 transceivers will ship. It
is February now and I am getting very excited.
Keith
AG6AZ
Sent from my iPhone please excuse typos
__
Elecraft mailing list
Home:
Ah, yes, Tony. Today's need for instant gratification has not bypassed the
ham radio community. We probably invented the term. (And the boys at Elecraft
help keep it alive for us every day) ;o)
73,
Terry, W0FM
-Original Message-
From: Tony Estep [mailto:estept...@gmail.com]
Sent:
I think they meant the 'OTHER' end of February.. You know, closer
to March.
...bill nr4c
On Wed, 8 Feb 2012 11:33:36 -0800, Keith Heimbold wrote:
Just curious is there any word on when the first KX3 transceivers
will ship. It is February now and I am getting very excited.
Keith
Well I guess instead of a Valentine days present it will be my birthday present
(early March). :-)
Keith
AG6AZ
Sent from my iPhone please excuse typos
On Feb 8, 2012, at 11:43 AM, nr4c n...@widomaker.com wrote:
I think they meant the 'OTHER' end of February.. You know, closer
to
Hmmm. Eric, might we have a competitive lobbyist in our midst hurling
negative-vibe bombs into the friendly confines of the E-Team territory? AND IN
ALL CAPS?
Terry, W0FM
-Original Message-
From: Eric Swartz - WA6HHQ, Elecraft [mailto:e...@elecraft.com]
Sent: Tuesday, February 07,
No. Actual older customer. Innocent mistake.
End of thread.
Eric
---
www.elecraft.com
On 2/8/2012 12:04 PM, Terry Schieler wrote:
Hmmm. Eric, might we have a competitive lobbyist in our midst hurling
negative-vibe bombs into the friendly confines of the E-Team territory? AND
IN ALL
In spite of the limited means available, Franco fixed the amplifier. He
found a transformer completely uprooted from its place due to the strong
turbolonces during his fly to Togo.
However in the evening Franco intend to be on air firstly on 30 and 40 m.
Stay tuned!
Here are some pictures.
I concur Frank.
I have QRQ turned on 'permanently' and use QSK a lot, which I guess could be
the reason CW-in-SSB is mostly broken for me (and you I guess) but not for
everyone.
I just checked as you suggested: in sequence ...
1. I had been using CW on 30m. Changing the rig to SSB mode and
http://www.mdxc.org/5v7v/good-news-from-5v-land-soon-on-air/
And on the air:
http://www.reversebeacon.net/dxsd1/dxsd1.php?f=0c=5v7vt=dx
_
73 de LA8AW - Odd-Egil
_
__
Elecraft mailing list
Home:
Got my cable today. The driver is installed. It is on com 3, Baud rate4.8,
Paraty none, Data bits 8, Stop bits 2, com. pwr RTS, poling rate 2 sec,
String to frq FH; , string to mode MD; , and mode by rig. Does not change
band or mode in my N3FJP logger. what am I doing wrong now? Tnx Geo/w2BPI
On 2/8/2012 5:47 PM, George wrote:
Got my cable today. The driver is installed. It is on com 3, Baud rate4.8,
Paraty none, Data bits 8, Stop bits 2, com. pwr RTS, poling rate 2 sec,
String to frq FH; , string to mode MD; , and mode by rig. Does not change
band or mode in my N3FJP logger. what
Hello,
Finished the KPA500 this morning and posted final photos.
See http://wilcoxengineering.com/amateur-radio/kpa500 .
The web page is set up as a slide show. When you click on a photo, you
go to Picasa on the Web where you can view the complete set of pictures.
Cheers, Alan
Alan D. Wilcox,
Had not turned port on in the K2 . Thanks for help. This thread can end. 72
Geo/W2BPI
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
Bill,
Yes, good lesson in ohm's law, that too often is overlooked.
So the current draw dropped for 20A to 11.7A. That means you were
heating your lamp cord with 8.3A at 12.7v (= 105w). Not necessarily
bad on a cold winter's night (humour)! But actually a waste of
electrical power and
It was the TX1 setting. I know that I have never touched that since day one.
But it is working now. Thanks to all who replied.
Zack
- Original Message -
4...@comcast.net, flexra...@flex-radio.biz
Sent: Tuesday, February 7, 2012 8:34:44 PM
Subject: re: Has my KPA500 failed?
I hope you get enough. 700hz is a nice filter for general CW.
Sent from my iPhone
On Feb 8, 2012, at 1:52 PM, Gary W. Hvizdak gary.hviz...@cfl.rr.com wrote:
Given the lack of response to N8CEP's recent WTB Reflector message, we are
curious if there's sufficient interest to warrant another
My K3/100 kit arrives tomorrow. I did not order the sub receiver. I have only
a vertical here and have some antenna restrictions (height) I use a SteppIR
BigIR and it works great for me with my height restriction. So, unless one of
you can explain to me why I should have the sub receiver with
If you're interesting in chasing DXpeditions that run split pileups
(listening up), the sub-RX is very useful for tracking where they're
listening, so you can be calling where you're likely to be heard -
listen to the DX on one receiver and tune around with the other,
looking for the guy giving a
Hi John,
For one it makes working DX a bit easier. Not only can you work split, with
the second receiver, you can hear BOTH sides of the split. Big deal? Well
for one thing that ability allows you to figure out the pattern of the DX
station (moving up/down?). That makes you more effective in
John,
Depending on your operating interest you may or may not need/want the second
receiver. If you do now or in the future chase DX the 2nd rcvr is almost
required to work stations that xmit on one freq. and listen on another freq.
a couple of Khz up or down.
Regardless of your operating
I'm shopping for a remote antenna tuner that will work well with my
K2/10. At the moment I'm favouring the LDG Z11ProII and building a
weather proof container to put it in. The LDG draws little current and
may be battery powered. SGC make outdoor tuners and they have a wide
temperature operating
Ok guys, I get it. I've always worked split with dual vfos but I see the
advantage of the ability to hear the other guys instead of shooting blind and
hoping the dx staion picks me up.
If you don't have something, you don't know you need it! I'll put the sub
receiver on the buy list.
I use mine almost exclusively to monitor 6M for
band openings with a dedicated 6M antenna while
I'm operating on other bands.
The input to the 2nd RX can be configured in
several ways as outlined in the manual. KE7X's
after-market book has an excellent section on
this subject.
73!
Ken Kopp -
You probably have noticed, there are a lot of Elecraft missionaries lurking
in the weeds here.
73 Joe K2UF
No trees were harmed in the sending of this e-mail; however, many electrons
were inconvenienced.
-Original Message-
From: elecraft-boun...@mailman.qth.net
The Elecraft T-1 tuner if you need an external tuner that will work with
many transceivers.
If you willl only be using it with the K2/10, I highly recommend the
Elecraft KAT2. It will remember the settings for 2 antennas per band
and works seamlessly with the K2.
If your need is for a remote
Hi Ron,
I tried an LDG tuner operated remotely in an enclosure at the base of a
125'
tower with 120 radials. It was powered with a local 115VAC - 12VDCPS.
I had two failures, and even though LDG fixed the tuner under warranty,
I gave up and sold it. They couldn't ... or wouldn't ... tell me
Hi Ron,
I have a couple of those LDG tuners and like them. I have no experience with
the SGC tuners.
I did have a problem with the LDG tuner in single digit F temps, but the
winter has been mild here and that was only one night. I think I could
easily run an extension cord out to where the
Bill W4ZV wrote
***
(de W4ZV: Repairable products and excellent support are why Elecraft is
becoming the de facto standard for DXpeditions.)
And a great source for DX tips! Worked Franco on 80 CW tonight.
73,
Lou, W0FK
-
St. Louis, MO
K3 #2513, P3 #620
KX3 *On Order*
--
View
Thanks Mike,
the low temperature operation, if its mounted outside, would be a
problem. We've had an exceptionally mild winter here, but mild for us
is still below zero F during the day and quite a bit cooler at night
(when I'd be home to operate).
Ron VE8RT
On Wed, 2012-02-08 at
Congratulations! I built mine last week! Very nice! 73s Gene
--
View this message in context:
http://elecraft.365791.n2.nabble.com/KPA-500-coming-2-14-tp7267017p7268240.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Watch this video and you will understand how QSB can happen in multiple
ways simultaneously.
http://apod.nasa.gov/apod/astropix.html
Kevin. KD5ONS
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Has anyone crafted a case for the AT1 Step Attenuator?
(and how /do/ you make nice small rectangular holes for switches)
/eric
kj7ae
--
View this message in context:
http://elecraft.365791.n2.nabble.com/AT1-Step-Attenuator-Case-tp7268493p7268493.html
Sent from the Elecraft mailing list
56 matches
Mail list logo