Thank you Joe & Don for the help.
I had forgotten about how critical balancing the soundcard levels.
Tks. 73, Chuck N7BV
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
My original post (below) morphed into a thread on standards, etc ... the
discussion was insightful and useful in defining my solution to question #1
below. Thanks.
Question #2 remains. How do I remotely switch between 4 positions on an RX
antenna switch (e.g. K9AY switch box) via some kind of
I've been having a similar BAT LOW issue only in digital modes when
running more than 80w out. This past weekend I picked up some 45A APP
connectors and 8 ga wire, made a new 5' power cable and all is well. 100
watts with no issue.
73, Dennis NJ6G
On 3/4/2018 08:03, Barry wrote:
In
I use a VizBug these days. Love it - like a well made sewing machine.
Quiet!!
Bill W2BLC K-Line
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
Hi,
Seems like there is a problem with the KX3 Utility running with the newer
linux kernels... After updating I just started getting the following error
immediately after running:
Segmentation fault (core dumped)
I've never had a problem before with the KX3 utility so not sure what is
I just worked it in CL51. It was calling CQ and I got a response
on my first call. It was -05 dB and I was +05 dB with 100W to a
5 band trapped vertical (raised with 4 raised tuned radials.
73 Bill AE6JV
On 3/6/18 at 1:45 PM, ki0g...@gmail.com (Bob Cutter) wrote:
Just worked it.
What a
The first electronics books I studied came from my dad's WWII foot
locker. He was a radioman on B17s, did a stint as a Marine Corps DI,
then went to radar school in Ogden, Utah. After that he went back to
the Pacific Theater and was a radar/radioman for the rest of the war in
B24s. Each
See the example configuration for microKEYER (or microKEYER II as
appropriate) at www.microHAM-USA.com/Support.html. In addition to
following the example for your particular software, you will want
to set up transmit audio levels in your sound card and microKEYER
(or microKEYER II) as
Chuck,
It is the right address for the Elecraft Email Reflector.
Are you using DATA A mode? If not you should be.
Do you have audio sufficient to drive the ALC meter up to 4 bars solid
with the 5th bar flashing?
For more details go to my website www.w3fpr.com and scroll down to the
last
Byron,
You will have better and more stable power out if you increase the audio
to 4 bars solid with the 5th bar flashing.
73,
Don W3FPR
On 3/6/2018 3:21 AM, Byron Peebles wrote:
.
So, I had the radio listening and keying, but not making any noise. What
I missed is the LEVEL control that
Just worked it.
What a thrill, thanks.
72, Bob KI0G
> On Mar 6, 2018, at 2:15 PM, Mike Flowers wrote:
>
> Thanks, Jim - that was pretty cool!
>
> - 73 and good DX de Mike, K6MKF, Past President - NCDXC
>
>> -Original Message-
>> From:
GD,
Hope this is right Email address.
I apparently have something set wrong on my K3 for PSK31.
Am using HRD & microKEYER (interfact)
Have no problem RX'ing
TX'ing seems to output as see TX on water fall and on Watt Meter
however people locally don't see anything from me.
K3 is in PSK31
This is as good a time as any, I guess. I'm selling off items from the
estate of my friend Marv, W0ZK. One of the items is a clean and
functional T.O. Keyer, a.k.a., Hallicrafters Model HA-1. The package
includes the octal control plug with the speaker jump installed. A
printed copy of the
Still have a TO. It’s for sale.
> On Mar 6, 2018, at 4:12 PM, Bill wrote:
>
> I purchased a TO Keyer and a Vibroplex paddle from Allied Radio, in 1966.
> What an advancement from a straight key! Both are long gone now - compliments
> of Uncle Sam and too many moves.
>
> Bill
I purchased a TO Keyer and a Vibroplex paddle from Allied Radio, in
1966. What an advancement from a straight key! Both are long gone now -
compliments of Uncle Sam and too many moves.
Bill W2BLC K-Line
__
Elecraft mailing list
Home:
Reducing overhead and underfoot, selling redundant complete Elecraft
K-Line setup.
Lightly used and owned by a broadcast engineer, kept covered,
non-smoking home. All units work excellently as new. New this full
shack setup cost $7800, if purchased as a set will sell for $5200. If
purchased
Sadly, I would suggest *not* using Anker's product - I've had link
stability and data corruption issues with it, as have some others.
Scott
On Tue, Mar 6, 2018 at 7:19 AM, Phil Hystad wrote:
> I use Apple's USB-C to USB adapter. $19 cost I think. I actually have a
> bunch of
When I was a teenager, 61 years ago, I saw a U.S. Navy manual with a photo
of a Mon-Key. It was a WWII era manual. At the top and botomof the pare
was printed "Confidential". Evidently the keyer was important enough to
warrant being classified hardware.
I had a teen buddy who had one and we
I used a HA-1 keyer during the early 1960's. However, it was not the
first successful commercial electronic keyer!
It was my third keyer. My first keyer was the "Mon Key," which did not
have self-completing code elements, and my second was a Eldico, which
was self-completing. Both these
Thanks, Jim - that was pretty cool!
- 73 and good DX de Mike, K6MKF, Past President - NCDXC
> -Original Message-
> From: elecraft-boun...@mailman.qth.net
> On Behalf Of Jim Brown
> Sent: Tuesday, March 06, 2018 11:26 AM
> To: Reflector Elecraft
this made a great case for my k2-100 and kant100 with mic , key and
cables at $39.99 w/o 20% off coupon found in most magazines.
https://www.harborfreight.com/3800-watertight-protective-case-16-516-in-63927.html
3800 case
__
Elecraft
Here's a neat operation using a KX3. Thanks to this "heads up" from
Rusty, I just worked it on 20M FT8. Go to the link below to read about
the operation, click on links at the bottom of the page to see details
of the station (KX3, computer, audio and control interface), then click
on the
Eric,
In addition to the KXPACBL, you need the KX2ACBL to separate the
computer control and the Key Out signals.
Yes, the computer connection is still to the KXPA100, but the KX2 has
only one ACC jack and the KX3 has ACC1 and ACC2 jacks.
You plug the KX2ACBL into the KX2 ACC jack and that
I did a Show-N-Tell with our club’s CW class last Saturday using my
46-year old Hallicrafters T.O. Keyer so they could operate the first
successful commercial electronic keyer, and to underscore how viable
vintage tube gear still can be. To add luster, I dug through old log
books to resurrect
I am a bit flummoxed as to how to set this up. I can't find anything in the
KX2 or KXPA100 manuals. I am at a remote site for today only, so please email
me directly if you can help.
I have the KX2 working fine with the KXPA100, and an FT817 + KXPA100 + CAT
working with a rigblaster.
I use Apple's USB-C to USB adapter. $19 cost I think. I actually have a bunch
of them for my Macbook Pro and two iMac computers in the house.
73, phil, K7PEH
> On Mar 6, 2018, at 4:51 AM, Jeff Davis wrote:
>
> Curious what others are using for a USB interface from the
Alan,
I have the KX3, KXPA and KPA500, but not the KAT. Instead, I am using the LDG
AT-1000ProII.
With the KPA off or in standby mode, I put the KX3 into XMIT and auto-tune the
LDG. Then, I hit ATU TUNE on the KX3. The power indication on the KX3 will
not include the KPA output, but it
I use VACO lugs and crimping tools. These are found at electronic
supply houses. For DC power and ground bonding of station equipment,
I use #10 AWG auto primary wire. It is available in multiple colors and
has fine strands making it flexible and easy to work with.
I also flow solder
Don... I removed the KAT3, cleaned the contacts as you suggested. Seems to
be working fine for now. Thanks for the tip.
Dave... I previously had problems with the front panel pins. They have
since been replaced with gold pins. Haven't had further issues.
Mike... thanks for your reply as well.
Curious what others are using for a USB interface from the KX3 to the
MacBook Pro with all USB-C ports.
73, Jeff KE9V
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Hi all,
No, the major contest season has not ended. The WPX contest is still to go
at the end of this month.
AB2TC - Knut
Byron Peebles-3 wrote
> I had a goal to take a shot at Digital modes after the 2017-2018 Major
> Contest Season, which ended Sunday with the close of ARRL DX SSB. So,
>
I had a goal to take a shot at Digital modes after the 2017-2018 Major
Contest Season, which ended Sunday with the close of ARRL DX SSB. So,
Monday I was determined to make as much progress as I could with
something digital.
My first effort was to try MMTTY, since it was already somehow
32 matches
Mail list logo