Good morning,
After a one year +/- hiatus I am back on this list. I am interested in
how the K3 is doing. No need to post anything. I will just watch.
However, if anyone wishes to send me an email off list, I will read and
respond as appropriate.
73 and HNY,
Dave, K4TO
K2 S/n 4??? (I
Esteemed group,
I have really enjoyed lurking and reading this thread, which until now,
has emphasized the technical aspects of music recordings. I can't help
but add the following comments about the human aspects.
Studio recordings are wonderful in that they allow control of many
things, a
Ten-Ten International calling frequency is 28.450, if I remember
correctly. There seems always to be activity with those folks.
K4TO
Robert Tellefsen wrote:
Ron
For cw tune 28000 to 28100.
For ssb tune 28300 up to perhaps
29000.When activity is thin, I
expect you will find what there is
niftyaccesories.com
Phil LaMarche wrote:
I can no longer find the small mini manuals sold on the Elecraft site. What
was the name so I can Google. They were great.
Philip LaMarche
LaMarche Enterprises, Inc.
www.instantgourmetspices.com http://www.instantgourmetspices.com/
www.W9DVM.com
niftyaccessories.com
better spellingsorry---K4TO
Dave Sublette wrote:
niftyaccesories.com
Phil LaMarche wrote:
I can no longer find the small mini manuals sold on the Elecraft
site. What
was the name so I can Google. They were great.
Philip LaMarche
LaMarche Enterprises, Inc
One man's nemesis is another man's requirement By pure chance, I
learned to use a keyer with a Mode B machine many,,,many years ago. I
now find that I have trouble leaving off trailing dots if I use a Mode A
machine. So the remark that Mode B allows leaving off a tiny bit earlier
is
I have enjoyed the list and have met several very interesting people
from it. However, it is time to close out my run with this forum. It is
quite a chore to keep up with the 30-50 emails per day that run through
this list. I enjoy my K2 and use it a lot as an IF rig for microwave
operation
Gee--I don't remember it as being particularly difficult. Is there some
flaw in the threads of either the nut or the connector? Is it the
correct size nut?
K4TO
Michael Cook wrote:
Hi all. I've been assembling my K2 since thursday and having a ton of
fun. Last night I just finished the last
I have the following two rotators for sale:
M squared OR2800PX Azimuth positioner (rotator) and companion RC2800PX
Control box. RS-232 control port built in. This unit is just back from M
squared where it was completely checked out. It comes with mast clamp
and hardware that will accept up
Well..I can't let the classical musicians dominate this thread :-)
. I am lead trumpet in a 16 piece Big Band. We play all the Big Band
Classics from the 20's, 30's, 40's, and 50's. I am almost the youngest
at age 63. We have three who are 85. Some of our guys actually played
with the
Dan, et. al.,
I have a dialup connection and photos and other large attachmets don't
work well. The 160 antenna has been up since 1990. It is constructed of
Rohn 45 tower, guyed at three levels with Phillystran. There is a Rohn
insulated section inserted with the insulator at 28 feet above
Dan, et. al.,
I have a dialup connection and photos and other large attachmets don't
work well. The 160 antenna has been up since 1990. It is constructed of
Rohn 45 tower, guyed at three levels with Phillystran. There is a Rohn
insulated section inserted with the insulator at 28 feet above
Jeff,
I wish I were close to you so that I could help, but KY to the West
Coast is a bit far. I would, however, like to commend and encourage you
to work on your code speed. On the air experience is great, but there
are alternatives. Some keyers have an option to send random code groups.
music!
After 10 minutes anything will sound good!
Sorry, couldn't resist ...
Speaking of bagpipes, do you know why pipers walk while they play? To
get away from the sound!
- Keith KD1E -
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Dave Sublette
*snip
Gee guys, maybe you need to check eyesight. I found it in 3
secondsat the right hand side of the page in the box at the bottom.
K4TO
Dan Barker wrote:
Can you be a bit more vague on the URL? I searched the home page and site
map for poll, and used their search function for vote, vote
H...bad problem. Have you considered elective surgery to swap sides
with your arms? :-P
Sorrycouldn't resist.
73,
Dave, K4TO
Darwin, Keith wrote:
I'd LOVE to order one but there is a Problem with them. I send left
handed with paddles and right handed with a straight key. I need
I would have tried to check in, perhaps, but I thought there would be no
net due to Kevin's situation. Perhaps next time.
Dave, K4TO
Mark Saunders, KJ7BS wrote:
Thanks to Tom for running the ECN while Kevin tended to pressing matters.
The QSB was slow and deep here in AZ plus I could not
To all,
With tongue firmly in cheek and a smile on my face (try that!) let me
say to this issueGET A LIFE, people. I remember the good old days
of the straight key. I could hardly wait to ditch the @#$%^ thing and
get a bug. I bet the use of the straight key was the second leading
Larry,
You have just explained the very reason that I have sold all of my Japanese
radios. Service is expensive and slow. I now have all American made, and
for the most part built myself from kits equipment. I would highly
recommend the TenTec line of gear. The Jupiter or a used OMNI VI+
I probably won't be home in time for the net. I am presently in
Indianapolis, where I'm being charmed by my granddaughters6 year old
twins and their 2 year old sister. We will be home later tonight...Happy
New Year to All.
Dave, K4TO K2 s/n 4117
If this is a duplicate, I appologize, but I posted it 18 hours ago and
it hasn't appeared. Is there some delay built into this relector??
Good afternoon,
Now that I have your attention, I don't really think that my K2 is
haunted, but it does seem to want to tune itself.
As I tune the knob
Thanks to all who responded. The haunting is now over. I adjusted
the VFO knob to put a bit more pressure on the felt washer and now it
stays put when I turn loose of the knob.
Dave
Dave Sublette wrote:
If this is a duplicate, I appologize, but I posted it 18 hours ago and
it hasn't
Thanks to all who responded. The haunting is now over. I adjusted
the VFO knob to put a bit more pressure on the felt washer and now it
stays put when I turn loose of the knob.
Dave
Dave Sublette wrote:
If this is a duplicate, I appologize, but I posted it 18 hours ago and
it hasn't
Just use a G6Y relay and key it with an input from the K2 and switch the
commom input of the transverter between T and R connectors of the K2 at
the appropriate times. It is simpler than trying to modify the DEM
transverter.
Dave, K4TO
Kent Tannery wrote:
I am trying to use my K2/100
Congratulations Jo!
The only comment I can make is that I don't know if it is a good idea to
put your K2 on Top of the kenwood...for two reasons
!) Heat...will it get too hot there?
and
2) embarrassment. Won't the Kenwood just die of embarrassment when it
hears how much better the K2
Sandy,
What antenna did you use on 160? It must have beeen pretty good to have
worked that many stations. I ran 100W(TenTec Omni VI+) for the contest
and worked 397 Qs and 80 multipliers, many of which were DX. But my
antenna is a full quarterwave elevated groundplane. I have found that
Same hereK4TO
Tom Skinner wrote:
I am running wireless keyboard and mouse (both USB) and a wireless internet
connection (USB) with no problems that I have noticed.
Tom, KJ3D
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Mark Baugh
Sent:
Hello to all,
I'm getting ready to do a realignment of my K2 using Spectragram. The
first thing it calls for is to make a cable using 1/8 stereo plugs
using two wire cable and only the tip and sleeve connection. Well I
have a perfectly good 1/8 stereo cable that includes the third wire
ring
Shoot, don't feel bad. I just aligned my filters last week after having
and using the radio for two years and found I hadn't touched the
alignment at all. No readings were written down for the VFO settings. I
don't know what I was doing. As you say, the radio worked pretty well
anyway.
73,
Internet Explorer thinks it's a blank page alsoK4TO
Stephen John Farthing wrote:
Greetings from England,
I wonder if anyone can help me get access to the AMRAD Website. I am
about to start building the K0BRA Active RX Antenna as featured in the
Sept 2001 QST and I am interested in
Well after all of the variations of URLs and browsers, I finally clicked
on the Active LF Antenna article and was told You are forbidden access
to this pageI guess I'm not interested after all :-( K4TO
Don Wilhelm wrote:
It worked with Firefox for me. First has to manually add the
With tongue firmly in cheek, let me offer the following advice ..
Just remember the motto of the Red Green Show, Any tool can be the
right tool for the job. I have used the wrong tool for the job for so
many years that, now that I can afford to buy what is needed, I don't
know what the
Can someone tell me what the QRP hang out frequency is on 80m CW?
Thanks
Dave, K4TO
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
Thanks to all for the info
Dave, K4TO
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
I woodn't have believed it had I not read it all for myself :-)
K4TO
Thom R LaCosta wrote:
On Mon, 20 Mar 2006, Simon Brown (HB9DRV) wrote:
- Original Message - From: W2AGN [EMAIL PROTECTED]
I have been wondering how come the OT POLICE haven't pounced on
this thread yet, then I
Excess to my needs, I have an M-Squared OR2800 rotator and control box.
It is just back from M-squared where it was checked out and everything
replaced that was suspect. It is the older AC model. There is no rotor
cable with it. This is a used unit. I have used it to turn my VHF/UHF
antennas
It was a 500w slug, which leaves us with a 25 watt error, max.
Vic K2VCO wrote:
Dave Sublette wrote:
I stopped by to see them at their booth at a large hamfest to discuss
a problem I was having with their 300 watt amp for two meters. In
spite of careful tweaking and adequate drive
Winston Churchill once defined the United States and Great Britain as,
Two peoples separated by a common language.
K4TO
Darwin, Keith wrote:
One of my favorites is car parts. The hood is the bonnet. The trunk is
the boot. I think a fender is also different.
And of course UK women do not
I believe the conversation continued with Lady Astor saying, Sir, if
you were my husband, I would poison your tea. Whereupon Sir Winston
replied,Madam, if you were my wife, I would drink it!
Andy McMullin wrote:
On 10 Apr 2006, at 14:18, Dave Sublette wrote:
Winston Churchill once defined
Any opinions about the model 936 Hakko soldering station...any better
recommendations?
Thanks,
Dave, K4TO
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub,
I notice that these devices come with various ratings up to 30 amps.
Please be aware that the cigarette lighter socket in your auto is
probabably fused at five amps or so and the design of the cigarette
lighter plug probably will not sustain more than five amps without
melting down. I
I have had my KX3 for just over a year now, and love it. I am wanting to
try some of the digital modes using a computer and a third party software
package. I already use a logging program which controls the KX3. I also
have a Softrock SDR receiver and use HDSDR to look at the spectrum. I tell
/B0017QQQAE
73,
Matt VK2RQ
On 6 Dec 2014, at 2:49 pm, Dave Sublette k4to.d...@gmail.com wrote:
I have had my KX3 for just over a year now, and love it. I am wanting to
try some of the digital modes using a computer and a third party software
package. I already use a logging program
Has anyone used the KX3 with the Ham Radio Deluxe DM-780 digital software
package? I am trying to get the IQ output to run the waterfall with no
success so far.
Dave, K4TO
__
Elecraft mailing list
Home:
A friend sent me the post about this and so I thought I would join the group
and post my experience. I have had a KX3 for two or three years. I replaced
one of the high end rigs with it and am very pleased with the results. I have
a full quarter wave elevated ground plane antenna for 160.
I had one once. It was a tremendous TVI generator….
K4TO
> On Aug 15, 2017, at 4:07 PM, KENT TRIMBLE wrote:
>
> The Johnson 250-39 and B 380 T/R switches both had a certain amount of
> "suck-out" but they did protect tube receivers.
>
> I had both (still do) and preferred
; this doesn't impact usability, e.g. locating signals of interest. In fact
>> most sound cards are limited to displaying about 48 kHz of spectrum, while
>> the PX3 can go wider thanks to its high-performance/high-speed A-to-D
>> converter.
>
> 73 from David GM4JJJ
>
Hearing one weak sig under the noise (and there is NO noise) Called CQ 3 times
— no answer. 50 Watts, Dipole Location on highest point in the county.
KX3/KXPA100Sorry folks. No propagation here.
Dave, K4TO
> On Jul 15, 2017, at 4:04 PM, Wayne Burdick wrote:
>
> Hi
Heard your CQ, Wayne — called and got no response…. K4TO
> On Jul 15, 2017, at 4:10 PM, M. George wrote:
>
> Wayne, the NAQP RTTY contesting going on... it started at 1800Z today. It
> goes for 12 hours. There are a lot of signals on 15 meters, about half as
> many
efoot...
> 73 de W0ZF
> On Sat, Jul 15, 2017 at 3:17 PM Dave Sublette <k...@arrl.net
> <mailto:k...@arrl.net>> wrote:
> Hearing one weak sig under the noise (and there is NO noise) Called CQ 3
> times — no answer. 50 Watts, Dipole Location on highest poi
I was an ET in the navy. We had a week of school on that rig. The drawers
were on rollers and rolled out for maintenance, then tilted so you could get to
the bottom. You had to reach back along the sides and press a release to get
the drawer to tilt for maintenance. The only trouble was,
I have had my PX3 for a little over a year (I think). It has been used
sparingly. Until this afternoon, it has worked perfectly. Now I see a spike
in the center of the display and periodic spikes across the entire screen.
Almost all are symmetrical in frequency and amplitude about the center
the Rx I/Q plug from the PX3 and the irregularly space spikes went away and the
regularly spaced spikes were still there at the same levels as when the cable
was plugged in.
I’m still thinking there is a failure in the PX3.
Dave
> On Jul 16, 2017, at 6:06 PM, Dave Sublette <k...@arrl.net&
such as you are seeing.
>
> If it makes those responses substantial with the preamp on, then there may be
> a problem to be addressed.
>
> 73,
> Don W3FPR
>
> On 7/16/2017 10:07 PM, Dave Sublette wrote:
>> Good point. However I am on 20 meters, which r
quiet band, you'll see "stuff" that would normally
> be covered by the band noise. Turn on the preamp, and the artifacts that
> you're seeing should be pushed below the noise floor of just about any band.
>
> 73,
>
> Dale - WA8SRA
>
>
> On Sun, Jul 16, 201
Graham,
You didn’t say which microwave transverter you are using. Perhaps the
transverter input requirement can be adjusted to accept the 7W vs 5W. Many of
us who drive transverters at reduced levels find that the driving rigs often
have full power spikes for just a few milliseconds when
One more reason I forgot to mention. If your power output has to be adjusted
every time you switch to the band using the transverter, sooner or later, you
will forget. That might be the end of your transverter. That is why I always
set my stuff up so I don’t have to make any adjustments when
Don’t forget to look for noise in vertical and horizontal polarity.
Dave,
K4TO
> On Aug 1, 2017, at 9:33 AM, Rick Miller - N1RM wrote:
>
> I currently live in a townhouse and have made an offer on a few acres in a
> more rural area. I would like to measure the relative noise
Good Morning Bob,
I’m not sure my problem is the same as yours. My PX3 is only 2 years old and I
had never saved a configuration file to this point. Neither had I adjusted the
amplitude and phase on the I and Q channels. I did that for the first time
last night and, seeing it was
it is
> a hard error.
>
> If A hard error, contact supp...@elecraft.com and see if they might have any
> answers.
>
> 73,
> Don W3FPR
>
> On 10/16/2017 8:44 PM, Dave Sublette wrote:
>> I just went through the amplitude and phase adjustment to null out the
>
I just went through the amplitude and phase adjustment to null out the opposite
sideband response. All went well. I started the PX3 Utility and tried to save
the configuration settings, per the suggestion in the manual.
About half way into the process (Green Bar about 50%) I get an error
I just tried it again and got the same thing. I was able to download and
install firmware. It was the same that was in the PX3 but at least the comm
port is working.
> On Oct 16, 2017, at 8:57 PM, Dave Sublette <k...@arrl.net> wrote:
>
> I tried it at least three times a
My son, K4TOO uses his drone to place a messenger line where he wants it to
pull antennas up through trees. He has a remote release that makes it a very
accurate operation. He used it on Field Day this year and also to string
hidden antennas up at his home QTH.
Dave, K4TO
> On Aug 30, 2017,
Well, to state the obvious — just transmit during the same time slot that the
other station transmits….
K4TO
> On Aug 27, 2017, at 2:07 PM, Bob McGraw K4TAX wrote:
>
> A couple of things to check. Be sure the Line Output from the radio is not
> set to high such that it is
As a former CT — I enjoyed the web page. Thanks for sharing.
Dave, K4TO
> On Sep 1, 2017, at 1:09 AM, Mike Morrow wrote:
>
> Chas wrote:
>
>> SSB would have been the equivalent of encryption.
>
> Not even remotely so...SSB technology goes back decades before WWII.
>
>
This idea of putting headphones and mic on Bluetooth has interested me for some
time. Looking at the page on amazon, the 366-T device looks to be a
transmitter only. That would be fine. You could hook it to the speaker or
headphone output of the radio and buy a pair of Bluetooth headphones
I am happy to announce that my PX3 now saves the configuration without
complaint. Paul, N6HZ, project manager for the PX3 contacted me with
instructions. I took the PX3 apart, photographed the main board and emailed
him a copy. He looked it over and said all the correct parts were in the
Jerry,
Don’t obsess over which paddle is best for you. Which ever system you choose,
it will take hours and hours of off the air practice before you "should” put it
on the air. Which ever system you start with, you will learn to love and
prefer — if you get that far.
I use iambic B and a
The issue of who has priority on a given frequency was being debated 60 years
ago when I first got on 75 meter AM. It hasn’t changed. It won’t change. The
language issue became a problem for me 20 years ago. As a result I gave up
phone and went to CW only, for the most part. I also went to
I have used my K2 with a DEMI 2M transverter board in it to drive
transverters from 902 through 10368 MHz for many years. When I used it to
drive both 902 and 903 MHz portions of that band, the output was very much
lower when 29MHz was in use for 903. I can't say whether it was due to the
29
I can think of a couple of things where my ham radio experience blends with
my other interests. Radio Control Models: for many years I used the 53 MHz
band for my RC link. Now that the GHz equipment has come along, I use
that.
Music: I play trumpet in a couple of bands. My experience with
I'm helping my son, K4TOO do some antenna work. The antenna is up and
tunes on all bands with the KX3 on QRP. When we put the amp in line, the
amp ATU tunes all bands, except 160. When we hit the ATU tune button on
160, there are no clicking sounds. The SWR remains High and the power out
is
I may have bought something I don't need. I recently bought two of the
Cady books. "The Elecraft KX-Line The Complete Station" and " The Elecraft
KXPA100, PX3 and 2M/4M Transverter, 2nd Edition."
I believe the first book includes the same information as covered in the
second book. If this is
A few weeks ago I posted this problem, worked on it a bit, then got
distracted into other projects. I am now back trying to resolve the faulty
SWR issue with My KX3. The problem only occurs on 160, 80 and 60 meters.
Using a known good dummy load and cable the indicated SWR on the KX3 is
high
Good morning,
I am using the standard power cable that is supplied with the KX3. Using a
digital multi meter and the built in voltage monitoring capability of the
KX3, it looks like the supply voltage is dropped by 0.5 volts in the power
cord when transmitting with 5 watts According to the
I have just had a most unfortunate experience with a UPS and when Gary said
he had an old UPS he was considering, I shuddered. As far as I know, older
UPS units overcharge the battery continuously. The best "problem" this
seems to cause is having to replace batteries every three years or so.
In
So here I am with three hours to wait until my plane boards. I tried a set
of Bluetooth Sony noise cancelling headphones. Big mistake. They're
great.
$300.00 is too much for me. What other models are in use with Elecraft
folks?
Dave, K4TO
We were putting up a 2 element Moxon for 40M this week and I ran over a
Bumblebee nest. Two of them got me before I bailed out and left the
tractor running (in neutral).
Oh the joys of country living :-)
73,
Dave, K4TO
On Mon, Jul 30, 2018 at 7:54 PM Wayne Burdick wrote:
> I operated
Any hams in Florence, Italy? I am in the bar at the Grand Hotel
Mediterrano for the next hour.
Dave, K4TO
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
I should start with an apology to the group. Although I stand by what I
said in a previous post, I feel that the way I expressed myself was in
violation of decorum standards for this group. I am sorry for that.
After letting my BP come down and thinking about it a bit, I realized that
I have
Is this some sort of a spoof? You can't be serious. Putting beautiful
equipment like this into the weather(not quite, but almost) is poor
engineering practice at least and at most, a felony. If you insist on
doing this, sell your Elecraft stuff and buy one of the other three
imported brands,
When I was a teenager, 61 years ago, I saw a U.S. Navy manual with a photo
of a Mon-Key. It was a WWII era manual. At the top and botomof the pare
was printed "Confidential". Evidently the keyer was important enough to
warrant being classified hardware.
I had a teen buddy who had one and we
I built, about 20 years ago, a small Bud box, 2 x 2 x 1 3/4, three female
jacks on the back and a DPDT mini toggle switch with center off position.
It has worked perfectly. The center off position keeps me from sending
when I bump the paddle accidently.
73,
K4TO
On Mon, Mar 12, 2018 at
I worked the XR0YD on 40M with 5 watts, one call. The KX3 is a cool rig!
K4TO
On Tue, Mar 13, 2018 at 5:02 PM, Wes Stewart wrote:
> I still use my ears.
>
> And I don't use skimmer, automatic tuning via spots, remote stations,
> etc. I also have only a single receiver
Are you in CW mode? If so, is VOX enabled?
K4TO
On Mon, Apr 9, 2018 at 12:20 PM, Martin Sole wrote:
> Not in test mode :(
>
> I get the red TX led bit the display show 0w and - - where the VSWR
> display would be when I press TUNE in TX NORM.
>
> Martin, HS0ZED
>
>
>
> On
Good morning David,
A curious bit of circumstance forced me to use an earlier version of the
Apple O/S recently. My old Mac Mini died when its UPS went hysterical and
cycled the power violently several times. I bought a new one, complete
with 16GB RAM and the 1TB Fusion Drive (and a new power
There is an APP that allows you to specify when you want your package
delivered by UPS. Also, you might have been able to go to the UPS
distribution point in your area and pick it up, depending on what time of
day you got home, etc... I have done this several times.
I know it is disappointing
No doubt there are good radios available. But just remember. If it
breaks, someone has to fix it. Elecraft is the ONLY manufacturer I know of
that will send me an email from support with hints and helpful suggestions
BEFORE I contact them. I Went first to TenTec many years ago and then to
I tried to register and it said I was already registered. I'm not
complaining, but I thought the info might be useful to the website managers.
I didn't tried to see if any of my prior order history was there.
Dave, K4TO
On Fri, Oct 19, 2018 at 3:58 PM Fred Jensen wrote:
> Great site! A real
For the past 30 years I have lived-in the highest point for 25 miles in any
direction. I have three towers, 70 feet, 150 feet, and, until two years
ago, 200 feet. I lowered the 200 foot tower to 155 feet two years ago.
For the first 15 years my equipment was struck and damaged 4 times for a
Good morning all,
Skip to the last paragraph to get the question.
I operate almost exclusively on CW with a KX3 and K2 that I built in 2004.
I have the audio from two computers and both radios run to a small Xenyx
502 mixer , then to a small stereo amp and a nice pair of speakers. I
seldom use
Congratulations David,
For those of us who build, there is nothing quite like the thrill of seeing
something we have built come to life for the first time! I hope to hear
you on the air.
73,
Dave, K4TO
K2 and KX3 owner
On Wed, Sep 19, 2018 at 12:45 AM aj4tf wrote:
> With some assistance
Good sig here -- Wayne
K4TO
On Sun, Sep 23, 2018 at 6:03 PM Dave Sublette wrote:
> Copying VA6FAB with a good signal right on top of the net
>
> K4TO
>
> On Sun, Sep 23, 2018 at 6:00 PM Dave Sublette wrote:
>
>> Me too-- K2 , 5w battery power 160M vert
Me too-- K2 , 5w battery power 160M vertical...
Dave, K4TO
On Sun, Sep 23, 2018 at 5:59 PM Wayne Burdick wrote:
> Hi Kevin,
>
> Warming up the gear. I'll see you on 14.050, conditions permitting.
>
> Wayne
> N6KR
>
>
>
> > On Sep 22, 2018, at 8:23 PM, kevinr wrote:
> >
> > Good Evening,
> >
>
Copying VA6FAB with a good signal right on top of the net
K4TO
On Sun, Sep 23, 2018 at 6:00 PM Dave Sublette wrote:
> Me too-- K2 , 5w battery power 160M vertical...
>
> Dave, K4TO
>
> On Sun, Sep 23, 2018 at 5:59 PM Wayne Burdick wrote:
>
>> Hi Kevin,
>>
&g
Got it. Thanks to K4TAX who told me that, yes, indeed there was a menu
item red face...
73,
Dave, k4TO
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
I had the K3s operating correctly controlling it with an RS232 cable from
the computer. When I try to replace that with a USB cable, the radio isn't
found. The computer says the port is operating correctly. I'm stumped.
The software's the N1MM. I've made an inquiry there.
Perhaps there is a
My K3s arrived over the weekend and I have been setting it up. I am using
the rear Audio jacks to drive either headphones, or the Line out to drive
an amplifier and two speakers in the stereo mode.
The headphone jack has stereo output ok. But the line out only has right
channel audio. Left
This is the third night operating my new K3s and P3. I have had a KX3/PX3
on the air for several years. I never use the waterfall. It just never
seemed to useful to me.
Tonight I connected my 20 inch monitor to the P3. Then I noticed I can see
very faint traces in the waterfall. The signals
yes
On Tue, Jan 15, 2019 at 9:05 PM Charles Jack Hawley
wrote:
> Config-Spkrs set to 2?
>
> Chuck Jack
> KE9UW
>
> Sent from my iPhone, cjack
>
> > On Jan 15, 2019, at 7:01 PM, Dave Sublette wrote:
> >
> > My K3s arrived over the weekend and I have been
1 - 100 of 177 matches
Mail list logo