Phil wrote:
I need to switch my K2 mic input between two mic sources (TNC audio and
a real microphone). Both have the default Kenwood pinout.
I'm very pleased with my NCS-3240 Multi-Switcher. Switches mics, speakers,
computer lines, keyers, etc. Very versatile.
Someone previously wrote: Some of Elecraft's customers are faced with
having to spend $50 for a tool to use only one time? Why?, although they
have a choice to do it either way. Why do you say that? Elecraft does not
require them to use a crimp tool.
I purchased the cheapo crimper years ago
Chuck, AE4CW, posted:
Ron, I too had the headphone jack problem. After talking with tech
support I reveisited the assembly and am certain it's perfect, but there is
still a gap between the shoulder of the headphone jack and the front panel.
I measured it with a shim guage but, unfortunately
Drew, AF2Z wrote:
Yes, it is pretty easy to get within 10 or 20 hz by ear.
My dad was an entertainer and had perfect pitch. He could pick up a
telephone and tell you the note of the dial tone. I am a drummer and pretty
much tone deaf (When I sing I'm told I can change keys in the middle of a
Actually a ten minute countdown timer for we rag chewers would be kind
of nice touch and helps to comply with U.S. FCC regulations for ID
every ten minutes. The other option would be to have a built in CW
IDer that ID's every ten minutes.
Just an idle thought for when the Elecraft team has
Fellow Elecraftorians:
Some weeks back I recall a post here that the K3 6-meter performance did not
seem to be up to par with its HF band performance as well as that of some of
the other HF thru 6 rigs on the market, and there was some related
discussion regarding a future accessory receive
Hi Brian,
I have the Heil PR781 on my K3 (#474). I run the mic gain per the manual,
EQ flat and compression at about 10 and have gotten very good audio reports.
Also, no other in-line amps, mixers, etc.
73,
Terry, W0FM
-Original Message-
From: br...@brianlinn.com
Just how did this post get in here? Isn't this the Noisy K3 Receiver
forum. ;o)
Terry, WØFM
(sorry David)
-Original Message-
From: David [mailto:david_clo...@bigpond.com]
Sent: Saturday, December 19, 2009 5:12 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] Q
Hi,I am building
I can't seem to locate any info on the installation of the Revision D
K3DSPUPGD DSP board on the Elecraft web site. Is it not available until you
actually order and receive the upgrade board? If it IS available as a
download, I'd like to review it before ordering. Can anyone please help
point
Thanks Fred.
Terry, W0FM
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Fred Atchley
Sent: Saturday, December 26, 2009 10:41 AM
To: Elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 K3DSPUPGD Installation info?
Terry,
Thanks Fred! Happy New Year!
Terry, W0FM
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Fred Atchley
Sent: Saturday, December 26, 2009 10:41 AM
To: Elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 K3DSPUPGD
Did something change or am I misunderstanding Jim's post here. I thought
that the IF Output Buffer Mod would not be necessary with the P3. If one
does the IF buffer mod for the LP Pan now, how is the P3 affected in the
future? Does it then need to be reversed?
73,
Terry, W0FM
-Original
Miserable. I too was blanked in my attempts to check in from Missouri
yesterday. Could not hear net control at all or most other stations on
frequency either. Two stations I heard booming in I asked for help with a
relay and received no response. I figured the net wrapped up quickly and
was
Notified yesterday (12/4/08) that KDVR3 ordered in June of 2007 with K3/100
#474 will be shipping to me in about a week.
Terry, W0FM
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber
Don, W3FPR, wrote My vote is to do them all at once, but YMMV depending on
your
confidence level.
That has been my theory too. But it begs one further question.
I have the KRX3 second receiver, the ALC mod, Ant Shunt Switch Mod, CW Rise
Time Mod, the Hardware AGC Mod all sitting here
Then Id like the hat if possible.
Terry, WØFM
From: G4MKP [mailto:[EMAIL PROTECTED]
Sent: Monday, December 08, 2008 12:05 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] RE: KXV3 Available
Blimey! Didnt expect such a response so quickly. I will take all of the
names of those
Very nice article Chuck! You had told me you could read and write and I'm
sorry I ever doubted you. :o)
Terry, W0FM
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
[EMAIL PROTECTED]
Sent: Tuesday, December 09, 2008 11:07 AM
To:
K3/100 SN 474 (kit). DEAD QUIET fans.
They work. I've checked. I just can't hear them. Sweet.
Terry, W0FM
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr.
Dave, N1LQ wrote:
Has anyone with a K3 Serial Number around 370 received their KDVR or
received notice of its upcoming shipment?
Dave-
I have K3/100 #474 and was notified about a week ago that the KDVR3 was
about to ship. It arrived in my mailbox this past Saturday, 12/13/08.
73, Terry,
Jack K8ZOA wrote:
A good hobby shop catering to the model aircraft builders should have
2-56 hardware.
http://rtlfasteners.com/RC/index.html
RTL Fasteners has a large selection of 2-56 screws and other small black
hardware. They ship quick and are nice to deal with. I use them for my
How about GPS TRACKING ENABLED
Or, possibly DETONATES IN 9 SECONDS?
Terry, W0FM
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
What about the Kenwood microphones, like the MC-60 or MC-80?
Werner,
I'm using a stock Kenwood MC-34S with good results.
Terry, W0FM
K3/100 #474
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to
Roy, WK4Y wrote:
If it is possible and practical from a programming aspect, the following
would be a nice feature to have in the K3.
To have each menu function screen numbered and a sheet for reference with
the menu settings and there numbers listed. It would make finding what you
are looking
Wayne Burdick wrote:
Humans use lexicographical and semantic clues to fill in dropped CW
characters, and computers can do the same. But this goes way beyond the
simple signal processing used in, say, the K3's present CW decoder or
the one used in HRD. (I studied natural language recognition
Jim,
I thought that my sarcasm would be obvious in my post below Wayne's. I
probably should have included a :o).
73, Terry...W0FM
:o) :o) :o) :o)
-Original Message-
From: JIM DAVIS [mailto:nn...@astound.net]
Sent: Thursday, January 22, 2009 5:49 PM
To: Terry Schieler; elecraft
Ron, AC7AC wrote:
I can't speak for the engineering or product decisions that went into
offering 6 meters with the K3, but for an excellent low-noise 6 meter
capability Elecraft does offer the XV50 transverter which is well integrated
into the K3 and K2 rigs offering direct frequency readout, all
to all in Aptos!
Terry, W0FM
-Original Message-
From: wayne burdick [mailto:n...@elecraft.com]
Sent: Monday, January 26, 2009 11:21 AM
To: Terry Schieler
Cc: elecraft@mailman.qth.net; 'Ron D'Eau Claire'
Subject: Re: 6 Meters
Terry Schieler wrote:
I posted a number of months back asking
Hi Jim,
I had a similar experience with my K3 and ACLog from N3FJP. When I
contacted Scott I got the same reply. Of course, he never had an FT1000MP
like mine when he made my 'MP work with his software. I just got the
feeling that it's time for me to move to another program. His log worked
I am completing the installation of my KRX3. I am electing to share the
selected antenna (ANT-1 or ANT-2) with the sub receiver. I have the KAT3
installed. Do I still need to connect the 12 TMP cable between the KRX3
and J92 on the KAT3, or is this connection made somewhere else in the
Got it now! Thanks to all who responded directly and so quickly. Finally
got through this think skull of mine!
73 de Terry, WØFM
___
I am completing the installation of my KRX3. I am electing to share the
selected antenna (ANT-1 or ANT-2) with the sub receiver.
Wayne wrote:
This works smoothly, but as you noted, you might hear a soft blip
under just the right circumstances as you cross one of the transition
points. It's a little reminder of what it takes to create a very quiet,
high-dynamic-range RX.
73,
Wayne
N6KR
Thanks Wayne. I've not noticed
Perhaps Elecraft or a machinist would consider offering optional left and
right side panels for the K3 that are drilled and tapped to accept a mobile
mounting bracket. Painted to match, of course.
73 de Terry, W0FM
Robert Klein wrote:
I have a K3/100, no sub-receiver.
I do not find
G4ILO wrote:
I am sorry, this is going to be a rant, but exactly what do they think they
are playing at in Elecraft Sales?
Nearly 3 weeks ago I ordered a KXV3 and a couple of hardware upgrades for my
K3. I paid using PayPal, accepting the USPS charge which was nearly half the
cost of the actual
Geoff,
I experience the same issues between my factory aligned K3/100 (#474) and my
LP-100A (aligned by Larry at Telepost, Inc). Firmware 3.11 here as well.
Terry, W0FM
-Original Message-
From: Geoffrey Downs [mailto:geoff...@downs.globalnet.co.uk]
Sent: Sunday, May 03, 2009 6:12 PM
Bill,
N3FJP's ACLog was pretty much plug and play with my K3 connected via the
K3USB cable. I don't have my rig here at the office to check the settings,
but I'm sure others will respond with the info you need.
You should be good to go for FD.
73,
Terry, W0FM
-Original Message-
From:
So, if I understand it correctly, I jumped the gun and ordered the 100
degree 4-40 x 3/16 Flat Head Phillips SS black machine screws from Fastener
Express based on info posted here, when, in fact, Wayne is saying now that
they should be 82 degree countersinks?
I'd suppose this is now the final
Difficult to solicit reviews on a product that doesn't exist. ;o)
-Original Message-
From: Larry K1UO [mailto:k...@uninet.net]
Sent: Monday, July 06, 2009 1:35 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] E-Ham listing of KPA1500 gone
the KPA-1500 listing on the Amplifier
Kevin wrote:
How about if we have it sing the national anthem, proper selection for
DX of course, brew the coffee, and cook breakfast while we're at it? How
about voice recognition so you'll never have to touch another knob?
For crying out loud!
Actually, I was hoping it would have a rear
M0CDL wrote:
Hi I wonder if the powers that be have thought about doing a few elecraft
transverters in K3 Black to match K3's?
When I ordered my K3 a year ago I sent an email to Elecraft regarding this
same issue. I suggested that they consider having black housings available
for the KXV
W4VPI wrote:
I have a new k2 that is all but useless as a CW rig because of audio pops
when transition from tx to rx. Pop is also present when power on or pwr
off, vol setting no difference in level of pop. Worse with NR off.
I sent my K2 back to Elecraft a little more than a year ago because
For those tracking:
Ordered KRX3 with K3/100: 6/22/07
Confirmation of KRX3 order email from Katie: 8/18/08
Shipping confirmation received: 8/19/08
Scheduled delivery: 8/25/08
DVR Still backordered.
73,
Terry, W0FM
K3/100 #474
Ken,
I'd also bet that the incident spoiled that horse on apples for life!
Terry, W0FM
-Original Message-
From: Bill W5WVO [mailto:[EMAIL PROTECTED]
Sent: Thursday, August 21, 2008 11:36 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Even more OT: Electric fences
Ken Kopp
Sorry, meant for Bill.
-Original Message-
From: Bill W5WVO [mailto:[EMAIL PROTECTED]
Sent: Thursday, August 21, 2008 11:36 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Even more OT: Electric fences
Ken Kopp wrote:
I've heard that most critters ... once bit ... never
I received my KRX3 (ordered with K3/100 #474 on 6/22/07) this past Monday.
As we all know, the DVR ordered at the same time is still back ordered.
After looking over the KRX3 installation manual I wonder if anyone on the
reflector has looked into what will be necessary to install the DVR when it
Head's up on the PR6 6-Meter Manual. On page 3 of the manual it states that
the white control wire from the PR6Pre-amp should go to Pin 6 of the ACC
connector. However, the drawing actually shows that wire going to Pin 11,
which is highlighted.
I ordered one anyway!
Terry, W0FM
Fellow Elecraftonians,
For years I have used N3FJP's ACLog logging software in conjunction with my
FT1000MP and TS-850SAT. Like most others, the program has a DX Tel-net spot
point--click feature that changes the frequency, band and mode on my rigs
with lightning quickness. This weekend in
Thanks all. From what I read here it is most likely a combination of K3
settings and logging software problems. Years ago, I worked closely with
Scott, N3FJP to get the FT1000MP working with his software. He was most
diligent and appreciative of my input. I will continue to dig.
73,
Terry,
To: Terry Schieler; elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3-Problem with DX spot point--click and ACLog
Terry and All,
Hmmm! Sure doesn't sound like the Scott I've been dealing with for 8 years?
10 year? I have been using his ACLog program for all that time, and he has
always been very
I think that, in the spirit of the Elecraft design team and this reflector
(and before Wayne and Eric feel the need to step in), I would like to ask
that this thread be terminated at this point.
I was simply trying to provide a heads-up to other K3 owners. It has
never been my intention to
I have had the clock displayed on my K3 since day one. Today I noticed that
tapping DISP only rotates between the VFO B Frequency readout and the
current date. Went into CONFIG and TIME and the clock was still set to the
second. I'm sure it's something simple I bumped somewhere along the line.
Disregard. I found that you tap DISP then rotate VFO B to select what is
displayed. Apparently it only rotates between two selections.
Terry, W0FM
From: Terry Schieler [mailto:[EMAIL PROTECTED]
Sent: Saturday, November 22, 2008 6:35 PM
To: 'elecraft@mailman.qth.net'
Subject: K3 Real
Eric wrote:
we will not let quality supper
Many thanks for the update Eric. Now take a break guy and get something to
eat. You're obviously starving. :o)
Terry, W0FM
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You
Me too! All day long. The site must be swamped.
Terry, WØFM
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
[EMAIL PROTECTED]
Sent: Monday, January 14, 2008 4:15 PM
To: elecraft@mailman.qth.net
Subject: Elecraft Digest, Vol 45, Issue 23
Send Elecraft
What a dream come true. I would have had to have boxed up and shipped my
present high-end rig back to Japan four times by now for the same amount of
updates. You guys amaze me!
73,
Terry, W0FM
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
[EMAIL
Just a thought...
This question caused me to remember a conversation that I had with Lisa
shortly after placing my K3 order last June. I had just completed my XV50
for use with my K2. I immediately thought about building an XV144 for use
with the K3 that I am expecting in the next few weeks.
I just received my Lisa-Gram informing me that my K3 order will be shipping
in 7 to 10 days. The order was placed by phone with deposit on June 22,
2007.
Need to run home now and put some dry pants on.
Cheers!
Terry, W0FM
K2 #3617
ITS A K3!
At 7:10 PM on February 27, 2008, the Big Brown Stork delivered K3 kit #474
to W0FM. An 8.5 pound, 10 long bundle of joy. The delivery went
flawlessly and involved minimal labor, thanks mostly to the fine pre-natal
care provided by the amazing professionals in Aptos. The birth came
I was in the process of installing the KXV3 board in my K3. When
plugging the 16 Pin connector on the KXV3 board into J66 on the K3, I
noticed that the third pin from the right on the KXV3 connector was
missing. The photo appears to clearly show all 16 pins there.
Houston, do I have a
Has anyone else experienced a rattle where the thick headphone washer
(used as a spacer) between the K3 headphone jack and front panel doesn't
quite fill the void? I have everything lined up perfectly, LED's, mic
connector fully seated, pots and panel screws. Every time I move the
radio it
No, thank YOU Carl. I had several emails that were beginning to make me
think I was hearing things, or made a serious mistake. I could possibly
tighten the knurled ring a wee bit more but it already appears to be
compressing the front panel slightly. I only used my fingers as directed,
but I
Hello to the group.
Interestingly, while reading the threads here about the delay in the
shipment of the K3, I have just concluded a most interesting book by Jay H.
Miller (KK5IM) called A Pictorial History of Collins Amateur Radio Equipment
(Trinity Graphic Systems, publisher). I was amused to
Hello to the group.
Interestingly, while reading the threads here about the delay in the
shipment of the K3, I have just concluded a most interesting book by Jay H.
Miller (KK5IM) called A Pictorial History of Collins Amateur Radio Equipment
(Trinity Graphic Systems, publisher). I was amused to
Fred,
The link that was provided was
http://www.n4lcd.com/k3
There are multiple photos. If you notice the cheap little stick-on feet on
the right side of the K3, Wayne has already confirmed for me that those were
for the proto types only and that the production K3's will have normal,
sturdy
Mike,
Yes, the web page indicates the following:
Note: Some options may not be available at initial ship date. You will be
notified of this before shipment, and can chose partial shipment or request
that we hold your order until they are available. Our Shipping Status Page
will be updated with
I agree, Ron. This entire (lenghty) thread would have been better posted on
eHam.net than here..
Terry, WØFM
-Original Message-
From: RonSpencer [mailto:[EMAIL PROTECTED]
Sent: Thursday, October 04, 2007 8:49 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] Restrictive CQs
Just
I use N3FJPs logging software, ACLog. Years ago, I helped Scott, the
author, debug his software to do CAT with my FT1000MP. Everything worked
very well. I could click on a DX spot in his program and my FT1000MP would
instantly change to the frequency and mode of the spot. Since Ive had my
K3
Thanks guys. Maybe this old dog is still young enough for new tricks.
Perhaps I'm not too old to change!
;o)
Terry, WØFM
-Original Message-
From: Phil LaMarche [mailto:plama...@verizon.net]
Sent: Tuesday, June 08, 2010 1:31 PM
To: d...@w3fpr.com; 'Terry Schieler'
Cc: elecraft
Same issue I am dealing with Andy. I have my headset plugged in the rear
and my boom mic in the front panel jack. Both need different settings and I
tend to switch back and forth between the two mics with some frequency.
Terry, W0FM
-Original Message-
From: Andy Wood
Wayne is correct. It's time for a change.
Terry, W0FM
-Original Message-
From: Wayne Burdick [mailto:n...@elecraft.com]
Sent: Friday, June 25, 2010 10:39 AM
To: Elecraft Reflector
Subject: Re: [Elecraft] Clock Accuracy and Outlook 2010 conversation
deletion
Maybe we've had enough
After reading WestMountain Radio's comments on the APP roll rings a few
years back, I began just snapping off toothpicks in the roll pin hole and
dropping a dab of CA (super glue) on the tooth pick. I can still get the
toothpicks out if necessary (use a small drill bit) and they don't get into
Mike,
That would be Radio Shack's lifetime, correct? ;o)
Terry W0FM
-Original Message-
From: Mike Short [mailto:mike.sh...@mchsi.com]
Sent: Wednesday, July 07, 2010 6:24 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Good side cutter pliers for PC board assembly
I use the
That would be great, Dick. Guy has a very valuable suggestion there. I
know you've got a plate full before you, but if I had a nickel for every guy
on this reflector that asked me (or that I asked) for their settings, I'd
own four K3's instead of one. Thanks for your consideration on this.
I ordered two pair. One for use with my drums in my basement. The other as
part of my home-brew sonic jewelry cleaner and freezer defroster! And to
think, Guns 'n Roses only use the to HEAR THEMSELVES!!! What a waste.
Terry, W0FM
-Original Message-
From: Tony Morgan
Ken
Why not drop Elecraft sales a note asking who S/N 56 shipped to? That
person may not be active on this reflector, and, therefore, unaware of your
pursuit.
Just a thought.
Terry, W0FM
-Original Message-
From: Ken Kopp [mailto:k...@rfwave.net]
Sent: Thursday, August 05, 2010 10:07
Good point Don. Thanks.
Terry, W0FM
-Original Message-
From: Don Cunningham [mailto:wb5...@martineer.net]
Sent: Friday, August 06, 2010 9:47 AM
To: Terry Schieler; 'Ken Kopp'; elecraft@mailman.qth.net
Subject: Re: [Elecraft] P3 S/N 56 (:-)
I would hope that Elecraft wouldn't give out
Yes, it was a bad suggestion. My first mistake this year! ;o)
Terry, W0FM
-Original Message-
From: Bob [mailto:k...@att.net]
Sent: Friday, August 06, 2010 10:09 AM
To: Terry Schieler
Cc: 'Ken Kopp'; elecraft@mailman.qth.net
Subject: Re: [Elecraft] P3 S/N 56 (:-)
If I bought
Yeah, but you SOUNDED like you were in CA, Brendan!
Terry, W0FM
-Original Message-
From: Brendan Minish [mailto:ei6iz.bren...@gmail.com]
Sent: Monday, August 23, 2010 6:13 PM
To: Phil and Christina
Cc: Elecraft
Subject: Re: [Elecraft] Elecraft SSB Net results (8-22-10)
On Sun,
When I saw how long it was taking Aptos to fulfill P3 orders from the very
first day of order acceptance in April, I had hunkered down for a long wait
to receive mine. Shipments on the first day that P3 orders were accepted
back in April were being announced on this reflector with respect to the
For the clock watchers:
Ordered at 2:44 PM, July 1, 2010, P3-K #318 arrived in St. Louis at 6:10 PM
today (August 31, 2010).
73,
Terry, W0FM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
, 2010 6:29 PM
To: Terry Schieler; elecraft@mailman.qth.net
Subject: Re: [Elecraft] P3-K Arrival
I hope you enjoy your P3 as much as I have enjoyed mine, Terry!! It adds
another nice dimension to an already great rig. Now I can't wait for the
VGA output and other refinements to make it EVEN
My P3 (#318) was delivered last week. This morning I finally got time to
assemble it. What a joy!
I installed the P3 with the computer serial cable routed through it to the
K3. Since my first day of owning my K3 (#474) I have had the ability for my
logging software (N3FJP) to control the K3.
, 2010 4:50 PM
To: Terry Schieler
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] P3 Com Port Issues
It sounds like you have some other program on the PC using the COM port.
By any chance do you have P3 Utility or K3 Utility running at the same
time as the logging program? They can't both use
...@powersmith.net]
Sent: Saturday, September 04, 2010 4:38 PM
To: 'Terry Schieler'; elecraft@mailman.qth.net
Subject: RE: [Elecraft] P3 Com Port Issues
One quick thing to check Terry is the data rate on both the K3/P3 and your
logging program. They must be the same, and installation of the P3 may have
Which is further acknowledged by the fact that singers seldom record while
sitting down. More diaphragm punch when standing (especially after lunch!)
Terry, W0FM
-Original Message-
From: Toby Deinhardt [mailto:dj7...@muenchen-mail.de]
Sent: Tuesday, October 05, 2010 1:31 PM
To:
Guy, K2AV wrote: I want them PROFITABLE so I get to keep them.
That's a message I've used in our business for many years. You NEED me to
be profitable so that I am around to continue to serve your needs is a
statement that I've ingrained in my sales reps. When you are not the low
priced
Today I decided to download the latest firmware for my P3. Perfect! Then I
decided to download the latest K3 firmware. When I ran K3 Utility all
seemed to go as usual. When I clicked Load firmware to K3 the LCD screen
on the K3 went out but I could still see MCU LD blinking in the display and
: Saturday, October 23, 2010 3:24 PM
To: Terry Schieler
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 - Firmware Download Issue
Im away from home so I'll be brief
Remove the P3 back panel power plug
Disconnect K3 power supply
Reboot PC
Connect K3 power. Do not connect P3 power.
Press K3
I, too, used my Astron SS-30 and Samlec SEC1225 power supplies for years to
direct feed (via the coax) my SG-230 without a single problem. I'm not sure
that the warning you read was even in the manual for the SG-230 when I
bought mine back in 1987.
Terry, W0FM
-Original Message-
From:
Phil,
Anyone who has just spent 5 weeks cruising through Europe then rubs our
noses in it on this reflector probably doesn't DESERVE an amplifier. ;o)
Terry, W0FM
-Original Message-
From: Phil LaMarche [mailto:plama...@verizon.net]
Sent: Wednesday, November 10, 2010 4:25 PM
To:
: Thursday, November 11, 2010 10:55 AM
To: Terry Schieler
Cc: 'Phil LaMarche'; elecraft@mailman.qth.net
Subject: Re: [Elecraft] Elecraft Amplifier
This is a totally inappropriate posting for the reflector and is outside
of the list guidelines.
It is never appropriate to make rude and directly
Mike,
My old Linksys router did this. After many attempts to attenuate the
birdies, I took someone's suggestion and swapped it out to a new Netgear
router. All my birdies left with the Linksys. That said, others have had
no problems with the Linksys and still others had problems like mine with
In response to your friend's comment I am not sure I want to buy a rig from
a QRP company or any company that is owned by two guys, you might have
pointed out that Collins Radio was, initially at least, owned by ONE guy,
Art Collins. The founder of Heathkit was an individual who originally built
K2QI wrote: but now try to work with the window open and
have small desktop fan which attempts to blow most of the fumes and
smoke out of that window.
VERY interesting. Is there a chance this approach might finally quiet my
neighbor's DOG?
Terry, W0FM
-Original Message-
From:
I have used N3FJP's ACLog logging software for quite a few years. I'm not a
big contester and his software has previously done everything I needed. It
always worked very well with my FT-1000MP (I helped Scott configure his
software rig control for that radio early on and he seemed very grateful
Don,
Thanks! Now I understand what is happening. The mode change being sent
first is what is causing the delay in moving to the spot frequency. I
recall hearing the audio quality change on the initial frequency (like you'd
expect changing to CW from LSB), then an annoying delay, then the
I receive the reflector in digest mode. Today I received Issue 30 and 32.
What happened to Issue 31? Is it lost in the ether or did my server somehow
overlook it?
Terry, W0FM
__
Elecraft mailing list
Home:
Heard no trace of the SSB net today. Listened from 1750 till 1820. I
assumed the net might be waiting for the QSOs to clear from 14.316 and
14.313, but nothing happened after they cleared either. Was the net
convened on a different freq?
Terry, W0FM
-Original Message-
From: Roger
I have also used emery boards which are flexible enough to bow under
pressure and get a good flat surface attack on the paint around the hole.
The ones I use have course surface on one side and finer surface on the
other. Some have a foam like middle layer and are a bit more flexible.
Usually I
Hi Gordan,
I originally used my K3 with a Heil Goldline and the W2IHY EQ box. I
received great reports. But I needed some space on the desktop, so I pulled
the W2IHY box, added the Heil PR781 mic and did virtually the same EQ tweak
within the K3' menu. Same results, great audio reports, less
It's known as a loss leader Phil. Been around in retail marketing for
years. Advertise Pepsi at an unbelievably low price hoping to draw
customers into the store that might just pick up some Doritos or other
products in that aisle at a decent enough profit margin to keep the bottom
line in the
1 - 100 of 287 matches
Mail list logo
