o build an actual unit and measure the parameters listed above
AND resonant frequencies of the unit.
What you think is happening, most likely is not.
The "wives" tale associated with the Ugly Balun is just that. Put an Ugly
Balun on an analyzer, and very few would use them.
Jim
W6AIM
-
100% defective. Power company replaced it, and the noise was gone ever
since.
Jim
W6AIM
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Wes
(N7WS)
Sent: Wednesday, July 1, 2015 7:41 PM
To: elecraft@mailman.qth.net; SADXA
Subject: Re: [Elecraft
Fred, I purchased & have the K3microman app on my IPOD touch. Often receive
updates on other apps. I have never had one on your K3microman app. Any
updates coming???
73 de KE4WY Jim
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net
Tom sure will be missed. I remember him from our old Fox Tango Days 30 plus
years ago when Milt Lowen N4ML
ran the net and published the newsletters and we were running FT-101E's. He was
a great help to that group also.
73 de KE4WY Jim
On Aug 5, 2011, at 1:23 PM, Dave KK7SS wrote:
&
g Linux (Ubuntu 12.04) but I'm getting help with that end.
I've installed Fldigi for Linux.
There will be other questions no doubt but one is about Mic Gain.
From the K2 Menu mic gain is set at ssbc 1-1 is that the correct
setting for mic ga
but I am happy with it.
Jim
WA9ZBV
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
ery time of my brain from
all the "clatter" it just heard for hours.
Jim
WA9ZBV
--
Subject: Re: [Elecraft] K3 and a timewave Dsp 599zx
It is useless if you run QSK CW. The time delay is too great.
John/K4WJ
ex KN8PXG
I am sorry for the use of the bandwidth. If someone could direct me to
the specific post, I would appreciate it.
Tnx
Jim
WA9ZBV
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailm
Yes, the ribbon cable is routed in the
proper manner per Elecraft
recomendations.
Jim
WA9ZBV
- Original Message -
From: "Don Wilhelm"
To: "Jim" ;
Sent: Friday, December 06, 2013 4:24 PM
Subject: Re: [Elecraft] P3 Artifacts
Jim,
Have you tried re-dressi
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: htt
The text of my email didn't make it, so I'm sending this as plain text.
73, Jim N7US
Original Message
My Winkeyer keyer can easily generate a key-down. In addition, I have a
macro in Commander, the rig control module of DXLab, my logging program,
that is t
I want to capture a snap shot of the information that the P3 generates and
subsequently displays on my SVGA monitor in a common file format so I can send
it over the internet.
Are there any applications that will do this?
Thanks
Jim
WA9ZBV
and on
top position.
I found my arms and wrist got tired when having to
access the knobs and controls when the P3 sat on
top of the K3
YMMV
Jim
WA9ZBV
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo
sources. I no longer have the
room for beverages, which were the best with a phaser for 160-40 meters for my
physical location
Jim
W6AIM
Sent from my iPad
__
Elecraft mailing list
Home: http://mailman.qth.net/mailma
K1 is listed on eHam under ‘Transceivers’. Please contact me off list.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list
Always nice discount on New Years day just wish they would allow you to
order out of stock items but then I guess it's an inventory reduction sale!
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Joseph M. Durnal
Sent: Thursd
This was the exact statement in the QST review,
"Elecraft reported that they are working on developing an improved selection
process." I wouldn't read in that they are hand picking. If they are I would
like a confirmation.
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto
I really have not checked my K-3 out on 6 but just went to 6 meters on both
my Icoms and heard 2 different QSO's and then switched to my K-3 and it
appears to receive the stations just as well as a IC7000 & IC7700?
73 de KE4WY Jim
-Original Message-
From: elec
I never believe anything from an anonymous
source.
(((He has posted here in the last few dayslook back you will see it))
My view is different than his but he does have a right to his opinion.
I sure don't buy or discount a rig from an EHAM review.
Jim
KE4WY
-Original Me
2.80 available..
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
Administrator sign on and sometimes have to sign on
as an Administrator to install programs as an administrator.
73 de KE4WY Jim
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Adam Koczarski
Sent: Tuesday, January 27, 2009 2
rate things are changing, it's always
going to be a bit out-of-date.
My thoughts also.
Jim
KE4WY
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Doug Faunt N6TQS
+1-510-655-8604
Sent: Thursday, January 29, 2009 10:40
Ron, the AF gain knob fell off here same way. Emailed Elecraft parts and
they sent me one out in a very timely manner.
Hope you are enjoying your K3. Still enjoying mine & the nice rig you sold
me.
73 de KE4WY Jim
_
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-
Metal or Brass insert! Not just plastic.
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of WILLIS COOKE
Sent: Tuesday, February 03, 2009 10:14 PM
To: Elecraft Reflector
Subject: Re: [Elecraft] K3 RF knob Broken
I don't know wh
Same here. No issue with 2.80.
73 de KE4WY Jim
_
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Lee Buller
Sent: Wednesday, February 04, 2009 9:16 AM
To: OE5CSP-Chris; Elecraft Reflector
Subject: Re: [Elecraft] Firmware bug
AF limiterSET TO 13 HERE
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Ignacy
Sent: Saturday, February 07, 2009 11:08 AM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 AF Limiter needs higher threshold
I use
Bill, the adapter you probably have for your ProSet is the one with the
yellow band (Yaesu), you need to rewire it (Wiring Diagram is in the K-3
manual)or get the Heil adapter with the red band (Kenwood). Then you should
be ok.
73 de KE4WY Jim
-Original Message-
From: elecraft-boun
Mine is set to set as KENW baud 4800.
73 de KE4WY Jim
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Dick Housden, W0NTA
Sent: Monday, February 09, 2009 12:12 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 to
For Sale, Factory Assembled LP Pan $175. Price includes shipping conus.
Please reply off the list.
73, Jim
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
Anyone on the group now running K3 #367?
73 de KE4WY Jim (#2165 & #1520)
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Phil and Christina
Sent: Sunday, February 15, 2009 10:38 PM
To: elecraft@mailman.qth.net
Sub
Amen!
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of David and Dianne on
Comcast
Sent: Monday, February 16, 2009 1:28 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] K3: "Qiuck Split"
It's an excellent feature that auto
it I
will ship it to them priority mail for $120. Conus only.
Please reply off the list.
73 de KE4WY Jim
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
The Elecraft PR6 has sold.
Also have an INRAD
1.8 filter that I would like to trade for a 2.1 INRAD or sell outright.
250 hz filter that I would like to trade for a 400 hz INRAD or just sell
outright.
Please reply off the list.
73 de KE4WY Jim
It works. Good addition.
73 de KE4WY Jim
_
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Robert Dorchuck
Sent: Friday, February 20, 2009 6:32 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] K3 Birdies
I recently installed the
nu, I
changed SUB AF from NOR to BALANCE.
Now all is well.
73 de KE4WY Jim
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Bill W4ZV
Sent: Saturday, February 21, 2009 11:18 AM
To: elecraft@mailman.qth.net
Subject:
Have (2) K3'S Selling one.
For Sale Mint K3 with current updates (Enhancements)
Fully equipped less two filters, DVR & Sub Receiver.
Anyone interested Please reply off the list & will give more details.
73 de KE4WY Jim
__
Have two K3's, selling one.
Have REDUCED price.
Anyone interested Please reply off the list & will give more details.
73 de KE4WY Jim
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elec
K3 has sold.
Thanks to all who replied.
73 de KE4WY Jim
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Jim
Sent: Tuesday, February 24, 2009 6:05 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] K3 F/S
Have two K3&#
Agree, The K3 is stellar.
Never any desensing in the presence of strong signals observed with my K3.
I have found nothing that compares.
73 de KE4WY Jim
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Gary Smith
Sent
Robert, when I got to the part concerning the chokes I was told if you are
not having a problem leave as is, so I did (I did add the jumper to mic
same with sense mod (However I did the sense mod anyway).
73 de KE4WY Jim
-Original Message-
From: elecraft-boun...@mailman.qth.net
Randy, I have experimented with 1/4 wave slopers here with good success.
Just wish the Par's would handle legal limit.
73 de KE4WY Jim
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Randy Cook
Sent: Monday, Mar
I went this route and updated (2) K3's with the E850235 boards. The boards
are $20 verses the kit with some resistors spec. to 1% is $15.
73 de KE4WY Jim
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Bill W4ZV
window would expire on Saturday (the
test session was on Thursday). An hour later the VE that administered the CW
part of the tests came back in with the new operator and said that we had a new
Extra.
73,
Jim KD5VXH
JIM DAVIS wrote:
> On Mon, 9 Mar 2009 16:48:59 -0400
> KC2UEE
Just loaded MCU 3.03 and DSP1 & 2.. 2.10.
Went without a hitch.
73 de KE4WY Jim
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
erica Earthquake Center
headquartered at the University of Illinois about the strong probability of a
seismic event somewhere along the New Madrid fault line could make for a very
active season for emergency operations.
Jim
ron wrote:
> Jim Wiley wrote:
> > This is very OT, to be sur
were
described in the following manner: "A Bug is an Undocumented Feature."
Jim KD5VXH
- Original Message -
From: "ab2tc"
To:
Sent: Wednesday, August 11, 2010 8:21 AM
Subject: Re: [Elecraft] K3: PR
Hope this gets through. I had downloaded the file and with permission of
the list moderator will share it here. Enjoy and 73.
Jim Good KD5VXH
- Original Message -
From: "Nels Nelsen"
To:
Sent: Monday, October 05, 2009 12:34 PM
Subject: [Elecraft] Elecraft] Incredible R
hones like a Heil Pro set you
cannot listen to both sides of a conversation at the same time WHEN both VFO
A and B set...VFO A at 14.195 and VFO B at 14.205...you must always
push the REV to listen to B. They can never be heard at the same time??
that is now on my computer.
73 to all,
Jim Good KD5VXH
- Original Message -
From: Microsoft Online Customer Service
To: Jim
Sent: Tuesday, October 27, 2009 9:09 AM
Subject: RE: SRX1115380891ID - Compatibility with software written for
earlier versions of Windows
Hello James,
Thank you
Locally they charge $10 more for the Handbook but picking it up and paying
tax I save about $4 over the special offer account the freight charge.
73, Jim
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Bill W4ZV
Sent
That's $4 saved by ordering from Elecraft.
73 de Jim
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Jim
Sent: Wednesday, November 25, 2009 3:43 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Special
Maarten, I found just the opposite having compared my K3 with two separate
7700's with the K3 winning out each time.
Also my wife being a non Ham picked the K3 audio over both of the 7700's
each time.
73 de KE4WY Jim
-Original Message-
From: elecraft-boun...@mailm
u.
Still, I don't hear any appreciable hiss in the K3.
73 de KE4WY Jim
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Ken Kopp
Sent: Monday, April 06, 2009 8:10 PM
To: elecraft@mailman.qth.net
Subj
My k3 audio level is typically set to 10 o'clock.
73 de ke4wy jim
Sent from my iPod
On Apr 28, 2009, at 11:52 AM, Allan Taylor wrote:
> I recently had my K3 (S/N 740) updated at the factory with the 2nd
> receiver and other relevant mods. It has firmware 2.78 installed and
&g
Oh'
Sent from my iPod
On May 13, 2009, at 7:37 PM, Radio Amateur N5GE wrote:
> On Wed, 13 May 2009 22:53:59 +, rfenab...@gmail.com wrote:
>
>> No KPA-800
>> No Panadapter
>> No 200W PA
>>
>> :-(
>>
>> Gary
>> Sent via BlackBerry® from Telstra
>
> Bummer!
>
> Sent from my five year old N5GE
which I set to +3
73 de KE4WY Jim
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of John Campbell, Jr.
Sent: Wednesday, May 20, 2009 2:50 PM
To: Elecraft@mailman.qth.net
Subject: [Elecraft] eq settings with a pr 781 mic
Any
I use the noise gate feature because I have a dehumidifier in my basement
close to the operating position and I have askedno one has noticed the
loud fan when it kicks on.
Config:TX Gate On 15
73 de KE4WY Jim
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft
Not sure but doesn't Vista come with 2.0 intergraded in the OS.
73 de KE4WY Jim
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Dan
Sent: Saturday, May 30, 2009 2:57 PM
To: Elecraft@mailman.qth.net
Subject: [Elecraft]
Anyone have a spare 2.7 Khz filter for the K-3 they would like to sell
please reply to me off the list with your price shipped.
Thanks de KE4WY Jim
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help
Have for Sale current run factory assembled LP Pan.
Anyone interested please reply to me off the board.
73 de KE4WY Jim
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net
2nd that, a 781 works fb.
73 de KE4WY Jim
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of David and Dianne on
Comcast
Sent: Monday, August 03, 2009 8:13 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] K3 and SM-20 mic
Heil kenwood 8 pin to 3 pin.
73 de ke4wy jim
Sent from my iPod
On Aug 3, 2009, at 11:00 PM, "amstel78" wrote:
> What cable would I need to get the PR-781 to work with the K3? I
> don't feel
> like fabricating anything this time around, and would just prefer t
There is nothing to be dismayed about.
When you have complex software development, upgrades, and patches, this
requires extensive software REGRESSION TESTING, in order to determine what
other existing functions or features may have been affected or impacted from
the new code release.
This is
KPA1500 would be nice.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Toby Deinhardt
Sent: Sunday, May 18, 2008 5:17 PM
To: Eric Swartz WA6HHQ - Elecraft; elecraft@mailman.qth.net
Subject: Re: [Elecraft] Re: Elecraft at Dayton
Hallo Eric & Reflector,
>>
mfortable
operating. In many cases it comes down to ease of operation and in some
cases pure looks.
Jim
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Robert Allbright
Sent: Tuesday, May 20, 2008 8:16 AM
To: ELECRAFT
Subject: [Elecraft] The K3 in compri
Don't forget the fan usually comes on when you transmit on the Solid State
stuff.
Jim
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of DOUGLAS ZWIEBEL
Sent: Tuesday, May 20, 2008 10:08 AM
To: Elecraft Reflector
Subject: [Elecraft] OT: THP 2.5KW amp
Stephen
Something is not right because you shouldn't hear fan noise. Mine is real
quiet, so quiet early on I checked to see if it was running.
Jim
- Original Message -
From: "Stephen Prior" <[EMAIL PROTECTED]>
To: "elecraft"
Sent: Thursday, May 29,
another. This could be the quick start type instructions found in most
owners manuals currently but with the files available for download and
someone's experienced direction towards those areas most likely to
require an individual's customization.
And anyone interested in a PCI Express Multi i/o card pretty cheap with 2
serial ports email me off the board.
Jim
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Bob DeHaney
Sent: Monday, February 04, 2008 12:51 PM
To: Elecraft@mailman.qth.net
Subject
Serial number 356 ordered May 15th arrived Feb 8th. Jim KE4WY.
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman
Sorry, Disregard. Wishful thinking...hit wrong key.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Jim
Sent: Thursday, February 07, 2008 5:11 PM
To: Elecraft@mailman.qth.net
Subject: [Elecraft] Got it!
Serial number 356 ordered May 15th arrived Feb
Serial number 367 received, ordered May 15th, no deposit, arrived Feb 8th de
Jim KE4WY.
UPS gave me a scare. The guy pulled up and was spending a lot of time in the
truck so I walked up to his truck and he said, "Looks like it's not on the
truck".
Since it is Friday lo
It's workable. Worked Ducie split on several bands and 12 meters without the
amp on. Yes, REV, like older Icoms & the new 7700. It works.
Jim
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Lee Buller
Sent: Friday, February 15, 2008 11
Just downloaded the latest & my 1st firmware update and all went without a
hitch.
MCU 01.68
DSP1 01.53
Jim
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change,
2nd that!
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Robert C.Abell
Sent: Thursday, February 21, 2008 6:45 PM
To: [EMAIL PROTECTED]
Cc: elecraft@mailman.qth.net
Subject: [Elecraft] Elecraft K3
Go for it, best SSB rig I have ever used. I operate SSB a
I use the presets often.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Phil & Debbie Salas
Sent: Friday, February 29, 2008 6:30 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] K3 filter presets I/II: present and future functionality
"Before we make
stion: Would you ever spend more
> for the identical unit made in the U.S.? If so, how much more?
>
> I'm very happy to have them here in the U.S., even if that means
> acknowledging that California IS part of it. :-)
>
> 73,
>
> Steve NN4X
>
&g
All
New firmware update is available. All went well without a hitch.
MCU 01.75
DSP101.57
73 de KE4WY Jim
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr
Stan, I use the 4 port keyspan with my K-3 and a dual core machine with
Vista Home Edition Premium, no issues. It has Worked on every upgrade.
73 de KE4WY Jim
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Stan Rife
Sent: Friday, March 07, 2008 10:44 PM
into the cost of the product
or the price you pay.
Just my thoughts.
Each company can handle their technical documentation in their own fashion,
however, it can get expensive, if not done efficiently.
Thanks,
Jim Dunbar
K4PV
Principal Engineer
Senior Technical Staff
MTC Technologies (BAE Systems
Has come up several times. Not in menu yet, understand soon!
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of John
Sent: Saturday, March 22, 2008 4:36 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] TX ESSB...K3
No, I am not an ESSB guy. But, I do li
How about 14.329 1800 utc
Icom is 1700 typically not long
Flex is 1900
TenTec is 2130
73 de KE4WY Jim
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of G3YMC
Sent: Monday, March 24, 2008 3:07 AM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft
Windy, correction
14.316 Icom is 1700 typically not long
14.329 Flex is 1900
14.329 TenTec is 2130
Yes, they are other radio forums on Sunday. One of these frequencies should
work.
Jim
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Windy Dankoff
So to make everyone happy a simple way to explain is 3.00 = 6.00
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Joe Subich, W4TV
Sent: Wednesday, March 26, 2008 3:00 PM
To: 'Dave G4AON'; elecraft@mailman.qth.net
Subject: RE: [Elecraft] re bandwidth selec
College Basketball tournaments plus I just flat out forgot.
Jim
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of KM5Q
Sent: Thursday, March 27, 2008 9:39 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] Elecraft SSB Net on 40m -- hello?
I heard
Got an extra one here in PCI express with (2) serial ports & software.
$20 shipped conus.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Dick Dievendorff
Sent: Thursday, April 03, 2008 11:50 AM
To: 'Bryan'; 'Elecraft'
Subject: RE: [Elecraft]KUSB
You
are being worked on for future
firmware updates. I think we are close.
Oh! And I have been looking at the 7700 also.
73 de KE4WY Jim
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of akm
Sent: Monday, April 07, 2008 11:17 AM
To: elecraft@mailman.qth.net
Su
Charles,
I believe that the Elecraft Moderator has asked for this Disruptive thread
"APP Roll Pins" to come to a halt.
I am not sure what point you are trying to make here.
K4PV
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Charles Harpole
Sent: Sunday,
An easy way to set up your filters correctly & quickly is to go into the K-3
Utility, go to configuration, click edit crystal filters, once there make
your edits and click ok and it will make the changes right away to your rig.
Jim
-Original Message-
From: [EMAIL PROTECTED]
[ma
Knut, no difference here either.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of ab2tc
Sent: Saturday, April 19, 2008 4:20 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3: Rob Sherwood's full text reply
I currently only have the 2.7kHz 5-pole
Low order distortion
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Jim Brown
Sent: Sunday, August 24, 2008 6:28 PM
To: Barry N1EU; elecraft@mailman.qth.net
Subject: Re: [K3] [Elecraft] Rx/Tx equalization band selection
On Sun, 24 Aug 2008 14:41:54
Anyone having & wanting to sell any of the below listed K-3 roofing filters
please reply privately to me off the list with your price.
Thanks de KE4WY Jim
KFL3A-400 400 Hz, narrow 8-pole roofing filter
KFL3A-500 500 Hz, narrow 5-pole roofing filter
KFL3A-2.1K 2.1 kHz, 8-pole roofing fi
Current out the door models mod'ed???
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Mike Harris
Sent: Thursday, November 13, 2008 11:08 AM
To: Elecraft@mailman.qth.net
Subject: Re: [Elecraft] [K3] in-band-IMD test
G'day,
The plot thickens.
Dave, I noticed a very small difference, but it's so very small and actually
never noticed it until you mentioned it.
73 de KE4WY Jim
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of David and Dianne on
Comcast
Sent: Saturday, November 22, 2008 5:51
Anyone having & wanting to sell any of the below listed K-3 roofing filters
please reply privately to me off the list with your price.
Thanks de KE4WY Jim
KFL3A-400 400 Hz, narrow 8-pole roofing filter
KFL3A-500 500 Hz, narrow 5-pole roofing filter
KFL3A-2.1K 2.1 kHz, 8-pole roofing fi
No fan noise here. Actually had to look closely. Yep! They are running.
73 de KE4WY Jim
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Rob May
Sent: Tuesday, December 09, 2008 10:58 AM
To: elecraft@mailman.qth.net
Subject: RE: [Elecraft] K3 Noisy fans
s far as a communication speaker I Have my trusty Icom SP-20.
Also a nice speaker is my Sounds Sweet speaker. I want to sell it but it
would cost a good bit to ship it.
73 de KE4WY Jim
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Beh
of a bummer, no QSK, band decoder or as you see as that added extra in
the foreign amps, 6 meters.
73 de KE4WY Jim
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Vic K2VCO
Sent: Saturday, December 20, 2008 10:45 PM
To
On 6/19/2024 9:38 AM, Dean Wood wrote:
It's fun to see where Elecraft gear is used.
Since about 2010, our team, usually signing W6BX, sometimes KU6W, has
always been an all Elecraft team, with two or three stations, each K3,
P3/SVGA, KPA500, KAT500.
73, Jim
male connector
that solders to a board, they can send you that.
73, Jim K9YC
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This
101 - 200 of 9507 matches
Mail list logo
