ALL SOLD!
Thank you to all who participated.
Thank you "Elecraft" for continuing to make this list available. smile>
73,
Clay E. Autery, Jr.
KY5G
On 2/4/2024 8:38 PM, Clay Autery wrote:
Still available:
SOLD - 1 each - KFL3C-400 (400 Hz) filter, Offset = -0.71 ** $8
could send a MO, cashier's check, personal check (held to clear)
to me at
CLAY AUTERY <Pay to Order of...
2617 BEAVERWOOD CIR
HAUGHTON LA 71037-9353
(318) 518-1389
Or, if you just HAVE to, PayPal to k...@montac.com (though I loathe
giving PayPal money, and won't d
Still available:
1 each - KFL3C-400 (400 Hz) filter, Offset = -0.71 ** $85.00 shipped
** (Never used)
Other stuff sold.
Clay E. Autery, Jr.
KY5G
On 2/1/2024 10:31 PM, Clay Autery wrote:
SOLD - 1 each - KFL3A-2.7K filter ** $40.00 shipped ** (Never used)
1 each - KFL3C-400 (400 Hz
1 each - KFL3A-2.7K filter ** $40.00 shipped ** (Never used)
1 each - KFL3C-400 (400 Hz) filter, Offset = -0.71 ** $85.00 shipped
** (Never used)
1 pair - 2SC2782A-MP (NOS) - Matched pair, Toshiba NPN Silicon Epitaxial
Planar ** $70.00 shipped ** (New as received)
Basically, these
NOT directly related, and MAY not be related AT ALL but consider
clearing the tuning solutions stored on a section of the band where it
oscillates and let it RE-tune at a power level JUST below what it was
oscillating at
Then turn her up and see if it still does it. Likely will, but
Listen to Jim, guys. THE most frustrating thing in troubleshooting is
when the "trouble" is in the cheap/low quality parts used in an assembly.|
ALWAYS buy the best you can find/afford. Buy the best; buy once. I have
a FEW more vendors than Jim, but his point is nonetheless valid and
should
All the details are on my QRZ listing:
https://forums.qrz.com/index.php?threads/elecraft-k3s-100-dual-receiver-transceiver-10643-more.887926/
$3500.00 SHIPPED!! (lower 48, rest of world is at my cost)
Limited time, price lowered, shipping thrown in.
Perfect Christmas gift...
73,
--
Clay
1) It ain't Elecraft.
2) The XV-144 is out of production as you well know.
$600.00 is well within the realm of reasonable for the right buyer.
Guess you ain't the right buyer.
73,
Clay E. Autery, Jr.
KY5G
On 10/25/2023 5:32 PM, Wes wrote:
Wow, $600. You can buy a 25W Q5 Signal
Almost never, unless it is a new product that was not available at the
time of original purchase.
I do my research, analysis, comparison shopping, etc. /before/ I buy.
Saves a lot of mistakes and regrets.
For instance, I spent about 6 months researching my purchase of an ALL
BANDS
it here,
because I was openly mocked the last time I posted my stuff for sale.”
Sent from my iPhone
On Oct 23, 2023, at 1:49 PM, Clay Autery wrote:
No sir, that was not the least you could say. You could have kept your mouth
shut and keyboard silent.
You are also WRONG. I was NOT rude. I
about the comparison of
Elecraft equipment vs other manufacturers. I prefer to live without my head in
the sand.
Rob Mantz
NR4B
Sent from my iPhone
On Oct 23, 2023, at 11:22 AM, Clay Autery wrote:
I don't come to this list to talk about Kenwood. Please take your Kenwoo0d
stuff to another
art acting like a grown man, not some "soy
boy" ruled by his emotions.
Sincerely,
Clay E. Autery, Jr.
KY5G
Get TypeApp for Android
On Oct 23, 2023, 11:59 AM, at 11:59 AM, James Bennett via Elecraft
wrote:
>Rude, to say the least.
>
>
>
>
>> On Oct 23, 2023,
I don't come to this list to talk about Kenwood. Please take your
Kenwoo0d stuff to another list. Groups.io, etc...
Clay E. Autery, Jr.
KY5G
On 10/22/2023 10:17 PM, Wes wrote:
Like you I own a K3 and owned and sold a K3S. I also have a KPA500
and KAT500. I too got tired of waiting for a
Mine is the LAST NEW, not refurbished, KRX3A on the shelf from before
the world changed. :)
New synth etc...
I'd prefer to find someone who'd keep the entire transceiver together,
but I will absolutely sell the Sub-RX complete with synthesizer, AUX
DSP, etc... whatever came in the original
I was told they are done.
I have one for sale on QRZ as part of or on its own. I will not post it
here, because I was openly mocked the last time I posted my stuff for sale.
Clay E. Autery, Jr.
KY5G
On 10/8/2023 4:52 PM, Bernie and Cheryl wrote:
Dear Folks:
I suspect that Elecraft no
If I had that issue on either my 35 or 50, I'd do similar, but I would
use the Sorbathane purpose built isolators of the correct dimensions as
per the engineering doc.
I started out making my own isolators with raw Sorbathane sheet stock,
It's phenomenal when you mmatch the right material to
Talk top Keith who does tech stuff for Elecraft.
This started happening after I put my 2M module in... Then I slipped
with a screwdriver and shorting a resister so Keith fixed it all for me.
Not sure WHY it was throwing High CURR, but he got it all fixed up a
couple of years ago. :)
*KBPF3A General Coverage Receive (module plus extras), 1 each*
*$199.95 + Shipping* (world-wide)
Shipping + Full purchase price insurance, carrier of my choice, but
will consider recommendations.
_*Payment *__(in order of preference):__
_
*1)**Zelle
I appreciate you complete and considered response!
P3 is sold Will post the 2x SP3 later tonight. Still prayin' over
the radio's future.
73,
Clay E. Autery, Jr.
KY5G
On 9/14/2023 8:52 PM, Kenneth Christiansen wrote:
I managed to lose the EMAIL from the ham that wanted to sell
Still need to downsize. My K3s/P3 etc. is just a little to much volume
to consume on the travel trailer, and between traveling and visiting my
kids and grandkids, I am simply not going to have a lot of time to use
my "base station". I need to me mobile/portable, so I am going to try
to put
That's what the Chinese do Start taking parts out of the certified
design until it quits working, and then put the last one back.
Clay E. Autery, Jr.
KY5G
On 1/25/2023 5:23 PM, James Michener wrote:
If the radio still works, and if you find what part it is, Elecraft
can cost reduce the
Need to downsize Hopefully, I will be getting into a fully optioned
KX3/PX3/KPXA100 setup so I can more easily hump the radio (sans other)
to the field on foot, bike, or canoe.
This combo was/is assembled and tuned and petted, and... by me with
exacting detail, babied like my own children,
Unfortunately, SOME of us have had our bonding/grounding plans pushed
well down in the priority for 2+ years now Air gap is my only
choice right now.,
Clay E. Autery, Jr.
KY5G
On 8/24/2022 2:35 PM, Jim Brown wrote:
On 8/24/2022 12:10 PM, Bill Mader wrote:
A recent article in QEX talked
Yup Glad my hutch/desk are on ball bearing transfers Because I
remove EVERY cable/wire too. A year ago March I lost over 20k in
electronics, et al from a lightning strike on a TREE 20 feet from the
UN-GROUNDED pedestal. I'm STILL fighting them to recover. And with a
FULLY stuffed
It was a no-brainer for me to choose Elecraft as my equipment maker of
choice when I entered the hobby.
Took a long time and some bit of sacrifice to do so, but I finally got
my K3s, et al. FULLY optioned right before the parts started getting scarce.
Love ALL my Elecraft gear!
Clay E.
It is supposed to be in the signature
Be well!
Clay E. Autery, Jr.
KY5G
On 3/30/2022 12:03 PM, Wes wrote:
I didn't find his post out of line. His callsign is in his email address.
Wes N7WS
On 3/30/2022 9:49 AM, Clay Autery wrote:
Doug,
You last response makes you come off like
Doug,
You last response makes you come off like a gigantic "procreation tool".
I would like to think that this is not the case. Perhaps you would
consider "considering" your responses more completely from here forward.
And for ALL... It is, and has always been, customary to include your
LOL!!! That's funny and cruel. I wish my XYL would use some pledge
somewhere... anywhere pick a T-shirt... ;)
(Note: I KNEW the deal when I chose her. She's my treasure!)
Clay E. Autery, Jr.
KY5G
On 3/28/2022 7:43 PM, Stephen Black via Elecraft wrote:
All my best T shirts smell
Bwah ha ha ha ha!! That is hilarious! Well done, Wayne! Wel Done!
Clay
KY5G
On 12/22/2021 10:22 PM, Wayne Burdick wrote:
We considered offering a faster-than-light option for the virtual-K4 software:
the EleWarp(tm). But it turned out that, thanks to supply chain issues, we
can’t
of atmosphere.
I use 99.9 for cleaning all boards (flush after "scrub").Where allowed, I
follow up with RODI water flush and forced air drying.
Clay Autery
KY5G
>
> On Jul 15, 2021 at 06:51, Louandzip via Elecraft
> wrote:
>
&g
Wish it was readily available in the USA.
__
Clay Autery, KY5G
(318) 518-1389
On 03/22/21 07:43, hb9...@hispeed.ch wrote:
The book (1600 pages) is extremely valuable , systematic and professional.
Since 2019 (first English Edition) it also covers, among others, the North
My K3s "resting"/idle current is 1.37-1.39 Amos @ 13.3VDC indicated.
Hope this helps.
73,
__
Clay Autery, KY5G
(318) 518-1389
On 02/09/21 12:49, Ray wrote:
Igor……
I don’t have the Installation info on the K3,
But I found the Transistor data online for th
Oops, I apologize, I hit the wrong Reply button
__
Clay Autery, KY5G
(318) 518-1389
On 01/06/21 22:06, Clay Autery wrote:
Send it Can't imagine I can't figure it out... :)
__
Clay Autery, KY5G
(318) 518-1389
Send it Can't imagine I can't figure it out... :)
__
Clay Autery, KY5G
(318) 518-1389
On 01/06/21 21:14, Tox wrote:
Ah, but not the format you wanted.
On Wed, Jan 6, 2021 at 7:13 PM Tox <mailto:scott.sm...@gmail.com>> wrote:
For some reason, GMail won
he WayBack and download it all as a single intact website.
If anyone successfully does it, I will pay them $50.00 for a copy of it
to preserve for posterity. I would do it myself, but I am SLAMMED right
now with other duties.
73,
__
Clay Autery, KY5G
(318) 518-1389
On 01/06/21 1
s, records, drawings, et al so they say I spoke with
one of his heirs. I was going to take out a $500k loan to put the -808,
et al. back in production.
73,
__
Clay Autery, KY5G
(318) 518-1389
On 01/06/21 12:55, Tony KX3H wrote:
Maybe this isn't new news but the KE7X.c
fiat currency "dollar". And worth both
pennies.
73 and God Bless and Keep every single one of you!
__
Clay Autery, KY5G
(318) 518-1389
On 01/04/21 07:09, Barry wrote:
Just another reason why a forum makes so much more sense than pushing out
email
LOL!!!
__
Clay Autery, KY5G
(318) 518-1389
On 12/25/20 19:17, Wes wrote:
If you were woke, you'd know that the bell curve is racist.
Wes N7WS
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman
e person with whom I was interacting clearly
communicated that they thought I was "insane".
"I'm not crazy; my mother had me tested!" - Sheldon Cooper, Big Bang
Theory
__
Clay Autery, KY5G
(318) 518-1389
On 12/25/20 17:28, Joseph Shuman via Elecr
Thank you. I get tired of explaining this to folks.
__
Clay Autery, KY5G
(318) 518-1389
On 10/14/20 12:00, Jim Brown wrote:
On 10/14/2020 8:31 AM, E.H. Russell wrote:
Wireless introduces latency, wired does not.
DIGITAL introduces latency, NOT radio. ANALOG radio over
Yep I've used Office Depot and Office Max many times to do just that.
73,
__
Clay Autery, KY5G
(318) 518-1389
On 10/09/20 16:14, George Danner wrote:
Clay,
When I was traveling, we would send the document (PDF) to the local
Kinko which is now FEDEX.
They would print
books printed and in notebooks for flat, easy reference.
Practice on a small, multi-page doc to get your printer settings
optimized I print best quality, two-sided, standard paper... Works
great!
73,
__
Clay Autery, KY5G
(318) 518-1389
On 10/09/20 14:26, w4sc wrote
e K4 looks a LOT more reasonable than one might think from my perspective.
73,
__
Clay Autery, KY5G
(318) 518-1389
On 10/04/20 12:41, Tom Azlin W7SUA wrote:
I agree Gary,
I think the price corrected for inflation and performance has actually
dropped compared to my fully lo
Absolutely!
__
Clay Autery, KY5G
(318) 518-1389
On 10/04/20 12:41, Tom Azlin W7SUA wrote:
I agree Gary,
I think the price corrected for inflation and performance has actually
dropped compared to my fully loaded, dual loaded K3 nearly 10 years
ago ( and sold keeping my
Excellent idea!
__
Clay Autery, KY5G
(318) 518-1389
On 09/27/20 03:03, Nr4c wrote:
Use the P3 menu to set one of gibe sict buttons to this feature and when you
wish to save a screen, just tap the button.
Don’t have a P3 anymore but this worked for me. Utility save only
I've done it on my P3 w/ SVGA kit installed many times. I have a
screensaver set and I take captures of RFI.
Haven't done it in a while, so forgive me if I don't write a tutorial.
But it most definitely works if you have SVGA installed and updated
firmware.
__
Clay
Oops... Here's the board nomenclature:
K144RFLK_K144XV Reference Lock Board, Kit × 1
__
Clay Autery, KY5G
(318) 518-1389
On 08/25/20 10:53, Ronnie Hull wrote:
I recently purchased a complete KV144 kit to install in my K3. I’m told that if
I want to use it on 2M SSB OR CW
ed to ship it in and fix several
issues, one of which I caused when I slipped and let the smoke out of a
latching switch circuit...
Works now... I'd ask Elecraft
__
Clay Autery, KY5G
(318) 518-1389
On 08/25/20 10:53, Ronnie Hull wrote:
I recently purchased a complete KV144 kit
,
__
Clay Autery, KY5G
(318) 518-1389
On 08/24/20 17:40, Jim Brown wrote:
Yes, and this should definitely be twisted pair, contrary to what's on
a highly regarded mobile site. Also, radio equipment in vehicles
should NOT by bonded to the frame/chassis/vehicle metal.
OTOH, coax return
, AND the ability to put chokes
wherever you might need them to quiet down the power source from
possible noise from the vehicle.
73,
__
Clay Autery, KY5G
(318) 518-1389
On 08/23/20 13:32, Ed K1EP wrote:
You could do that. I wouldn't advise it for other reasons. Why don't you
etractable razor knife
with big thick snappable section blades. I use this in the
construction/renovation stuff where I want a handle for the blade.
But I STILL use SE razor blades without a handle for detail work.
73,
__
Clay Autery, KY5G
(318) 518-1389
On 06/04/20 09:59,
will chime in with deatil or a reference to a procedure... If
not, I will do it later... Class in 3 minutes.
73,
__
Clay Autery, KY5G
(318) 518-1389
On 06/03/20 10:35, Peter Dougherty wrote:
No, and I wasn't sure how to accomplish this. It's stainless hardware, but
I'm
You are correct, as usual. My intent in citing motors, et al.
was that MOST of these devices, especially these days, are
monitored/controlled by potentially offending devices.
__
Clay Autery, KY5G
(318) 518-1389
On 05/27/20 17:29, Jim Brown wrote:
On 5/27/2020 3:09 PM
rce of RFI.
__
Clay Autery, KY5G
(318) 518-1389
On 05/27/20 12:08, Phil Hystad via Elecraft wrote:
I didn’t know that an HVAC system would be an RFI generator. What part of HVAC
is the cause of this and is this a recent problem in manufacturing units?
Note — I have never lived in a ho
LOL
__
Clay Autery, KY5G
(318) 518-1389
On 05/18/20 14:57, Victor Rosenthal 4X6GP wrote:
Or you can do what I did with my K3: burn up a static drain resistor on
your antenna entrance panel, decide that the smell is coming from the
K4, take it completely to pieces to try
environment or in the field.
But there is simply no substitute for a proper set of OTE phones when
you need to dig an audio signal out of a pack or out of the mud.
My 2/100ths of a paper debt instrument posing as "money"
73,
__
Clay Autery, KY5G
(318) 518-1389
O
erformance, quality and comfort at a
fraction of the cost.
I have used these before, and they are awesome, which is why I am
willing to let go of my beloved HD598SE set. (Darling bride will use
them on her
new i9-based 16 core desktop.
73,
__
Clay Autery, KY5G
(318) 518-1389
O
creation alone, and simply
crack her open every 3 months and blow her out (CAREFULLY) with CLEAN
and DRY air...
73,
__
Clay Autery, KY5G
(318) 518-1389
On 04/30/20 14:40, Dave Cole wrote:
I wish you all had included a filter slot... :)
73, and thanks,
Dave (NK7Z)
https
Soo much awesome in those two posts!
__
Clay Autery, KY5G
(318) 518-1389
On 04/30/20 14:30, Raymond wrote:
Extra points if contacts made with K4
Ray
W8LYJ
Sent from my iPhone
On Apr 30, 2020, at 12:07, Wayne Burdick wrote:
DPOTA (n): Deserted Parks on the Air
Wayne is correct (of course). Thermal performance VERY often runs
altogether in opposition to intuitive thinking on the application.
__
Clay Autery, KY5G
(318) 518-1389
On 04/30/20 14:06, Wayne Burdick wrote:
For each product, we experimented with air flow direction
st amateur radio ON THE
PLANET!
__
Clay Autery, KY5G
(318) 518-1389
On 04/30/20 08:22, Tommy Judson via Elecraft wrote:
Ok, joined this group even though I don’t own an Elecraft radio - yet. I’m
wanting an Elecraft Elmer to help me understand which rig could be “the one”.
+1, yup! Mine is spot on, as calibrated... as in less than 1 Hz error rate.
__
Clay Autery, KY5G
(318) 518-1389
On 04/24/20 20:27, M. George wrote:
It sounds like you need to do the frequency calibration as documented on
page 39 of the manual
<https://ftp.elecraft.com
LOL! That's funny!
73,
__
Clay Autery, KY5G
(318) 518-1389
On 04/24/20 18:21, Dale Boresz wrote:
I have a stack of QST magazines from 1996 resting on top of my Astron
VS-35M. No transformer hum at all!
Have not tried magazines from any other years, so YMMV...
73,
Dale
ays in large CalPC steel towers Made them whisper
quiet AND protected the drives from shock as well.
73,
__
Clay Autery, KY5G
(318) 518-1389
On 04/24/20 15:07, Nate Bargmann wrote:
* On 2020 24 Apr 11:50 -0500, inventor61 . wrote:
If someone has a better idea than m
I ABSOLUTELY understand, and identify!
Could you clue us in on how you sourced/built that panel? I'd love to
have access to something like that!
73
__
Clay Autery, KY5G
(318) 518-1389
On 04/21/20 21:49, Dave Cole wrote:
Thanks Clay... I decided to add the patch panel
That is some really first rate work I dig it when folks
are fastidious about their cable routing and otherwise organize things
logically and NEATLY!!
73,
__
Clay Autery, KY5G
(318) 518-1389
On 04/21/20 18:53, Dave Cole wrote:
https://www.nk7z.net/rf-patch-panel
awesome.
Of course, I don't think it will do 10:1 either Can't imagine the
monster tuner (likely manual) that you'd have to build to handle 10:1 at
1500Watss, 100% duty cycle...
73,
__
Clay Autery, KY5G
(318) 518-1389
On 04/21/20 09:59, Lyn Norstad wrote:
Since
NO "water pipe" should ever be used as a service ground... I thought
the code was changed to actually bar that practice entirely.
__
Clay Autery, KY5G
(318) 518-1389
On 04/05/20 23:06, David Christ wrote:
That I understand but if the ground from the entrance bre
of puzzle! I'm guessing that not only can this be
demonstrated mathematically one way or another, but also experimentally
using say, my VNWA, sig generator, et al.
73,
__
Clay Autery, KY5G
(318) 518-1389
On 04/01/20 16:45, Mpridesti via Elecraft wrote:
Requested technic
I am an old Infantryman and Aviator. And I have been out a long time,
but I STILL use many of the "pro-words"...
Especially, I spell, phonetic alphabet, at al
I use "say again " in conversation without thinking Hey,
it works.
73,
______
Clay Au
for
which is pretty much everything I put my hand to. And I'm pretty
fond of talking to and sleeping with my XYL...
73,
______
Clay Autery, KY5G
(318) 518-1389
On 03/30/20 00:34, donov...@starpower.net wrote:
Hi Clay,
This thread is a discussion about the relative
Bottom Line: As in many things "It's the Indian, not the arrow."
Though, I still prefer to have the best bow and arrow that I can
possibly afford.
And as for me, "mission accomplished". (100% self-funded)
73,
______
Clay Autery, KY5G
(318) 518-
to my Elecraft extended gamily be well; be safe;
and be Blessed beyond their capacity to contain it.
73 all,
__
Clay Autery, KY5G
(318) 518-1389
On 03/29/20 13:37, Wayne Burdick wrote:
As Eric alluded to, the entire Elecraft design team is safely working from
home. We're busy
Again, out of curiosity. How do you define "better"?
__
Clay Autery, KY5G
(318) 518-1389
On 03/29/20 11:56, donov...@starpower.net wrote:
Hi Tony
Any of the top-of-the-line radios from Flex, Icom, Yaesu and Kenwood
have significantly better SSB performance t
What is this "better" SSB performance of which you speak.
I am primarily a voice guy And I am constantly complimented on the
quality of my transmissions.
How are defining "better" SSB performance?
73,
______
Clay Autery, KY5G
(318) 518-1389
On 0
Awesome, thank you!
__
Clay Autery, KY5G
(318) 518-1389
On 03/25/20 22:01, Dave Sublette wrote:
A brief, but excellent video on you tube discusses Maxwell and his
importance in history. If you are not familiar with "The History Guy",
this is an excellent way
Wish I could afford to buy 4 more to fill out the CW generator setup I
built 2 years ago
Such useful tool.
__
Clay Autery, KY5G
(318) 518-1389
On 03/24/20 20:21, Eric Swartz wrote:
We have them new in the box at www.elecraft.com :-)
73,
Eric
elecraft.com
Mine just happens to be sub-1dB accurate as tested I can't find the
datasheet from the XG3 measurement I did it several years ago.
I power mine with a Bioenno battery rather than a wall wart, too. FYI...
__
Clay Autery, KY5G
(318) 518-1389
On 03/24/20 14:41, Greg
Best money I have spent on instrumentation I have used it for tons
of stuff. And it REALLY makes calibrating the K3s easier and IMO more
accurate.
__
Clay Autery, KY5G
(318) 518-1389
On 03/24/20 14:17, Bill Smith via Elecraft wrote:
Looking at buying the XG3 signal
https://www.bioennopower.com/
LiFePO4, the best balance of power per unit volume/weight and safety.
They probably have one to meet your requirements off the shelf, but they
are capable of producing pretty much any custom battery you require.
__
Clay Autery, KY5G
(318) 518
I would have traded redundant parts of my anatomy for something like the
KX2 back in my day. There are few things worse than NOT being able to
talk to the folks you need to talk to. And not far away on that
list is having to hump a heavier ruck.
__
Clay Autery
That looks like a fun project. I may build that pair of units as a
field unit...
__
Clay Autery, KY5G
(318) 518-1389
On 02/05/20 21:37, K1FFX wrote:
If a build-from-kit solution would work for you, I can recommend two kits
from
qrp-labs.com <http://qrp-labs.
(indirectly).
There are better units available... maybe... but NOT at a cost I am
willing to pay.
I am VERY happy with my Bodnar stuff.
73,
__
Clay Autery, KY5G
(318) 518-1389
On 02/05/20 13:43, Gary Peterson wrote:
Does anyone have any recommendations for a particular 10 MHz GPS
I can also verify that the VSCOM serial boxes workI have this 8 port
one, and it greatly simplifies my cabling in the station.They have all
different types and port#s...
http://www.vscom.de/usb-8com-plus.html
73,
Clay, KY5G
>
> On Jan 25, 2020 at
UNinstall the knobs CAREFULLY. Wash in warm water with Dawn dishwashing
liquid and perhaps a toothbrush if soaking doesn't work.
Use compressed air to make double sure they are dry before
re-installation. Be CAREFUL with the set screws...
__
Clay Autery, KY5G
(318) 518
-and-p3-3rd-edition/paperback/product-23172859.html
73,
__
Clay Autery, KY5G
(318) 518-1389
On 01/19/20 10:55, w0xa wrote:
Anyone have this book they would like to sell?
The Elecraft K3 and P3, 3rd Edition by KE7X
Thanks
Kevin
W0XA
EVERY antenna is an IDEAL antenna and you don't need towers to hold them
up. You simply will it to sit where you want it to stay.
__
Clay Autery, KY5G
(318) 518-1389
On 01/16/20 09:20, WILLIE BABER wrote:
K7? Does that imply that Elecraft company makes it to heaven too
e
between the "in-house" 6-pole I just bought, or an INRAD #701 that
matches the one I bought with my MAIN Receiver...
73,
______
Clay Autery, KY5G
(318) 518-1389
On 01/14/20 11:16, Nr4c wrote:
I think you’ll find in the release notes that main/sub filters no longer need
to
s one more Elecraft box show up anytime
soon. LOL!!
__
Clay Autery, KY5G
(318) 518-1389
On 01/14/20 07:07, Martin Sole wrote:
Break the piggy bank, take out a loan, sell the kids, just do what it
takes. I did back in 2017 and built 7723 while I was working in the
desert.
f finding an "by INRAD" 8-pole available on the market
seems much less likely...
Obviously, I am operating on a number of assumptions here... which is
why I am asking...
73
__
Clay Autery, KY5G
(318) 518-1389
___
to
respond from an obviously faulty memory.
__
Clay Autery, KY5G
(318) 518-1389
On 01/13/20 16:00, John Altman wrote:
My K-Pod has stopped working ... it works (macros are functional) for a
few minutes after K3S turned on and then power light is out and button
functions
Wish I could afford to buy one while they are still available I
would like to say that I had the experience of doing s solder build...
__
Clay Autery, KY5G
(318) 518-1389
On 01/13/20 17:37, Wayne Burdick wrote:
And we're still selling them, too :)
73,
Wayne
N6KR
to be safe. You CAN use solid cable or solid
wire connectors, but the durability will be greatly reduced.
Hope this helps...
73,
______
Clay Autery, KY5G
(318) 518-1389
On 01/13/20 16:00, John Altman wrote:
My K-Pod has stopped working ... it works (macros are functiona
I've never been to Watsonville... BUT, I'd give my eye teeth to visit
Elecraft HQ IF I was going to be within 200 miles or so, I would
attempt to coordinate a visit. I have no idea what the company policies
are RE: customer drop-ins/visits.
73,
__
Clay Autery, KY5G
everything I can
think of at least a dozen times.
73,
__
Clay Autery, KY5G
(318) 518-1389
On 01/12/20 08:59, Don Wilhelm wrote:
Clay,
Have you measured the voltage displayed by the K3S during transmit? A
low voltage is a common cause for Hi Curr.
Reduce the vo
der.
I'm running out of ideas...
73,
__
Clay Autery, KY5G
(318) 518-1389
On 01/11/20 23:22, Clay Autery wrote:
Update...
1) Strictly speaking, removing the RefLock option board and associated
SINGLE TMP cable did not "fix" anything... Still have the "HIGH CUR
f is what you are looking for
73,
______
Clay Autery, KY5G
(318) 518-1389
On 01/12/20 02:01, Pedro, EA4KD wrote:
Many thanks Don;
Only need the instructions to add the resistors, I'll keep looking because I
haven't found yet.
Pedro, EA4KD
-Mensaje original-
De: Do
roblem"? The ANT3 TNP board connector is set at a slightly OFF angle,
and the TMP outer (coax shiield) might be touching the enclosure. Just
trying t figure out what is "wrong", and if it anything I have control
over...
73,
__
Clay Autery, KY5G
(318) 518-1389
On
RX was installed a couple days ago.
Any ideas as to what is causing this "issue"? I'm missing all my weekend
nets.
73,
--
__
Clay Autery, KY5G
(318) 518-1389
__
Elecraft mailing list
Home: http://mailma
n speakers, so they don't have to be monster-sized
conductors. I considered using CAT-5(+) wire and bonding all 4 pair to
a single loop, but I don't think a single run would be enough copper
(?), and I don't want to make multiple runs per driver.
*Any ideas?*
73,
--
__
C
1 - 100 of 608 matches
Mail list logo
