Dick,
You're supposed to be on vacation!
Step away from that computer... or in this case, iPhone...
Rick
K6LE
On 4/18/2010, at 1:18 , Dick Dievendorff wrote:
Either should work.
Dick
Sent from my iPhone
__
Elecraft
Not integrated in to the site yet I guess.
I imagine it has been a crazy-busy week around there with Visalia this weekend.
http://www.elecraft.com/order_form_p3.htm
Rick
K6LE
On 4/16/2010, at 5:39 , eric norris wrote:
I cannot find anything on the P3 on the Elecraft web page, including a way
Don,
I guess you missed the fact that he is working with an indoor antenna...
If he has wind and water problems he is in even bigger trouble than he thinks!
:-)
Rick
K6LE
On 4/12/2010, at 1:07 , Don Wilhelm wrote:
LS,
If the L/C settings do not change, then the antenna load
I think you did a great job of troubleshooting it and narrowing it down to
something outside the K3.
Rick
K6LE
On 4/12/2010, at 3:21 , lstavenhagen wrote:
True, hi hi. As it is I feel dumb for even posting this without actually
checking the actual settings first to see if they're not being
to split with various
offsets which I used to use extensively until I set up the macros.
Rick
K6LE
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft
;
will give you Up 2
and for the wider SSB split:
SWT13;SWT13;FT1;UPB7;RT0;XT0;
yields Up 5
If you then push the Split button twice it will unset the Split and re-equalize
the VFO's
BTW, These Macros are copied or derived from the examples in the K3
Programmers Reference
Rick
K6LE
On 4/11
than those solved problems I don't have any interference between the Mac
and the K3.
I don't know how I could operate computerless these days!
Rick
K6LE
On 4/9/2010, at 5:46 , lstavenhagen wrote:
Well, for what it's worth, I'm still trying to get over my prejudice that
computers and HF
Playback can also be done very nicely, without involving your computer, with
the very slick KDVR3 in the K3.
Rick
K6LE
On 4/6/2010, at 6:55 , Bob McGraw - K4TAX wrote:
Snip
With this approach, using available free software, one can record audio
direct from the receiver and play it back
question about
which way the fans should be blowing in the OP's K3 can generate!
Rick
K6LE
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft
For me, raiding the kitchen and borrowing all the metal cupcake baking trays I
could find worked great.
Heavy enough to not worry about knocking over, big enough to get my fingers in
to and metal so no worries about static.
Rick
K6LE
Don't know how you can say that about Apple..
They NEVER give out advanced info and seldom announce release dates until after
a new product has been announced with details specs and prices.
Now, the rumor sites are a different story.
On 3/30/2010, at 11:50 , John Ragle wrote:
snip
The
features he finds as he explores the P3.
Rick
K6LE
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http
After installing the 6.0 kHz AM filter I notice the Max DSP b/w is 5.0 and the
Shift center is 1.5 kHz.
Is this the normal set up?
TIA,
Rick
K6LE
# 3727
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
One of the Macros used as an example in the Programmers Reference does that for
Up 2 :
SWT13;SWT13;FT1;UPB5;RT0;XT0;
You can modify that for Up 1:
SWT13;SWT13;FT1;UPB4;RT0;XT0;
I have them programmed on my PF1 and PF2 keys and use them all the time.
Rick
K6LE
On 3/21/2010, at 10:48 , ac
than usable except for N4PY software and the proprietary Ten-Tec One
Plug software.
I personally don't see the angst. I connect my Mac via either of two
Serial/USB adaptors to my logging and / or control software and haven't had a
major problem.
Rick
K6LE
On 3/14/2010, at 5:28 , Roger de
A joke, right?
Rick
K6LE
On 3/12/2010, at 7:52 , Ken Roberson wrote:
Hello all,
I would like a macro to program into M3 memory
that would take the K3 out of split mode , then
send ( UP ) in CW and return to split mode.
Would appreciate any help.
Thanks 73 Ken K5DNL
Have you tweaked the input levels in the Sound panel in System Preferences?
Rick
K6LE
On 2/25/2010, at 9:01 , Richard Thorpe wrote:
I have a question for the group. I'm trying to setup for digital,
this is what I have, K3 running through a microham USB II to my Mac
running cocoaModem
Basically I set the output from the Mac to mid-range and then while
transmitting I bring up the Mic Gain ( Line ) until I see it flickering between
4 and 5 bars on the ALC. Set the power to what I want to run and go..
Rick
K6LE
On 2/25/2010, at 2:41 , Richard Thorpe wrote:
Thank you
by this were K3 operators
since if they had it cranked down to minimum they never heard me when I was on
their freq. Darn K3!
Rick
K6LE
On 2/25/2010, at 1:06 , John Harper wrote:
Gary,
Rick, you do realize that the more people that know this, the more difficult
the pile-ups will become
the Auto-spot worked beautifully; just not by spotting the DX but
by spotting the caller.
Rick
K6LE
On 2/24/2010, at 1:04 , Gary Smith wrote:
I've got the K3 and even the precision txco. When I am in most normal
qsos 1:1 I have no issues bring the digital filter to 50Hz and having
a delightful
!
Rick
K6LE
On 2/24/2010, at 3:36 , Don Wilhelm wrote:
Chuck,
While you cannot have one antenna set to bypass and the other one for
tuning - there is an easy way to accomplish that.
Since the K2 and K3 tuners remember the settings for each antenna jack
separately, just pre-tune the one you
I'll second that!
Rick
K6LE
On 2/11/2010, at 11:35 , Craig D. Smith wrote:
OK, I might as well document my personal wish list:
500W is more than enough. I want it physically small and acoustically
quiet.
Solid state. Auto tune and QSK with K3. AC powered. Kit is fine. No
internal
of the reasons I run cocoaModem instead of Fldigi on RTTY is the
ability to watch both the Main and Sub receivers on a waterfall and line up the
next contact while waiting to finish another.
Rick
K6LE
On 2/8/2010, at 9:09 , Leigh L. Klotz Jr WA5ZNU wrote:
What would you like out of PSK D
MLDX or RUMlog connected to my radio and of course can have
only one program using the RS232 port.
The difference, of course, with Fldigi is it's also the logger but I don't use
it as such.
Rick
K6LE
On 2/8/2010, at 9:38 , Leigh L. Klotz Jr WA5ZNU wrote:
Thank you, Rick.
You can
mode.
I can't imagine running an RTTY contest anymore without using your dual
wideband RTTY mode.
Thanks,
Rick
K6LE
On 2/8/2010, at 4:18 , Kok Chen wrote:
Snip
Not completely bug free, yet. The K3's CAT command KY command interface
still has problems, so you can't do FSK directly through CAT
final resting place!
Rick
K6LE
#3757
On 2/8/2010, at 6:29 , Don Wilhelm wrote:
Richard,
All controls are not for everyone. There are those who just want to
operate, and the default setting should be their choice.
For those who want performance enhancement, then several of us are
trying
Bingo!
I restored my last config (from 1/20) and problem is gone..
Now I am trying to noodle over what configuration item may have changed during
the beta upgrade that caused it.
At any rate, all is good now!
Rick
K6LE
On 2/6/2010, at 11:07 , WW2PT wrote:
My K3 was working fine last time I
as it should.
Also when it goes from dead to audio at 3.0 I get a nasty click.
Scott, maybe it's a Prather deal.
Rick Prather
K6LE
On 2/5/2010, at 10:45 , Scott Prather wrote:
All: This evening when running FW 3.76 I'm seeing a problem with my K3 that
I've never seen before.
When the K3
and it definitely gives me a sense of pride
and even attachment to my K3.
Rick
K6LE
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list
thing that I can see on it that would be nice is the ability to
shift the passband.
Rick
K6LE
#3727
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
I am very glad I decided to pay a little extra and ordered mine through Amazon
in mid-December. Had it by Christmas!
Rick
K6LE
On 1/11/2010, at 5:50 , Hector Padron wrote:
I consider my order a lost,I made in November last year and I have sent
emails and always had same answes back
at the
same time, someone that bought a K3 two years ago can have an equivalent radio
to a new one without having to replace the old one and take the resale hit.
Buy the K3 kit and enjoy the satisfaction of putting it together yourself. I
sure do.
Rick
K6LE
-Original Message-
From
go astray (yet HI! )
I shipped a crystal filter to Slovakia using the small Priority Mail Flat Rate
box for only about $16! A pleasant surprise..
Rick
K6LE
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo
Brett,
You might consider ordering the Stainless fastener kit K3SSKT instead of
spending the time to inventory the ones you'll need.
You get a complete collection of all the exterior screws and nuts with plenty
of extras for later.
Oh yeah, get some new, quality screw drivers..
Rick
K6LE
Using the Sub for balance works fine for in or out of Diversity mode.
Rick
K6LE
On 12/27/2009, at 8:09 , Vic K2VCO wrote:
Don Wilhelm wrote:
You can set CONFIG: SUB AF to BALANCE and the SUB AF knob will balance
between left and right.
Unfortunately this only works in Diversity mode
Jim,
I thought that too but what's puzzling is that the mic gets bias even with the
mono adaptor in line.
Rick
K6LE
On 12/23/2009, at 9:11 , Jim Brown wrote:
On Wed, 23 Dec 2009 16:56:44 -0800, K6LE wrote:
It's a stereo plug
No, it's not a stereo plug, it's a 3-circuit plug the CAN
Thanks for all the help guys. I have taken the mono adaptor out of the line
and will carry on enjoying the radio and the CM500.
Rick
K6LE
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
radio,
Rick
K6LE
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support
card) and
the mic input on the K3 is Mono. Should I use a mono adaptor or not? Doesn't
seem to matter but I am worried about possible damage to the K3 since I have
heard that at one time that mis-match was a problem with the Line In connector.
Rick
K6LE
They might be pretty good, they are on back-order right now..
Rick
K6LE
On 12/22/2009, at 6:47 , W0SZ wrote:
I too have used these speakers for 1 ½ years and they have been excellent
with no RF with 1500 watts out. I highly recommend them. W0SZ
and J5 on the KREF3 board was off from J5. Plugged
it back in and I am good to go!
Rick
K6LE
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft
The EDS mat that I have has the same snap connector as the wrist strap and it
has the 1 Meg ohm resistor built in.
Rick
K6LE
On 12/13/2009, at 6:03 , Gary Hvizdak wrote:
Sun Dec 13 04:44:00 EST 2009 Lionel (f6fcd) wrote ...
Your pad and hand-strap must NEVER be connected directly
ups and set the
KRX3 to ANT=ATU.
Before I take the covers off and recheck my install is their anything I should
check from the outside?
In the meantime I will enjoy the radio as is and continue exploring it's
amazing features tonight, not up to messing with it anymore today!
Rick
K6LE
Would like to have the Rx Ant and I assume the IF out
will be needed for the P3 - also may want to do some Xverters later
KFL3A-400 x2
Suggestions?
TIA,
Rick
K6LE
__
Elecraft mailing list
Home: http://mailman.qth.net
44 matches
Mail list logo
