Re: [Elecraft] P3 + SVGA (and cables)

That's the connector where the K-POD connects in addition to whatever Elecraft techs use it for 73, Fred ["Skip"] K6DGW Sparks NV DM09dn Washoe County Robert Brown via Elecraft wrote on 3/6/2024 6:34 PM: Excellent condition P3 w/SVA option. Only “defect” is that a underbody connector

[Elecraft] P3 + SVGA (and cables)

Excellent condition P3 w/SVA option. Only “defect” is that a underbody connector (presumably only used by Elecraft techs) is detached. Will provide original part if replacement is desired, but seems to serve no useful purpose. Unit is otherwise in pristine operational and cosmetic condition.

[Elecraft] P3/SVGA

I have for sale my back up P3/SVGA in the original box, and it comes with the original manual and cables. $850. SN 4806 if interested contact me off the reflector. I am good on QRZ. US sales only . Thanks Bruce WW8II __ Elecraft

[Elecraft] P3 SVGA card repair

Good afternoon, My P3 was just returned from Elecraft, where I sent it for repair (lightning). The SVGA card was in the box with paperwork saying the U502 voltage regulator was replaced, but the unit was unrepairable. Is there anyone on the list who would be willing to try and repair it? I

[Elecraft] P3 SVGA board wanted

Does anyone have an SVGA board for the P3 Panadapter for sale? Thanks, Tom G3OLB __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net

[Elecraft] P3 SVGA Option module

Looking for a P3 SVGA option module. Contact me if you have one for sale. W7SNR Bob Hughes b...@fctaz.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post:

Re: [Elecraft] P3 SVGA board blinking red light

OK thank you. > On Jul 25, 2020, at 9:56 AM, Grant Youngman wrote: > > The blinking red light is normal. Indicates the onboard processor is working. > > Grant NQ5T > >> On Jul 25, 2020, at 12:48 PM, Michael Gillen via Elecraft >> wrote: >> >> My P3SVGA board is acting up and there is a

Re: [Elecraft] P3 SVGA board blinking red light

The blinking red light is normal. Indicates the onboard processor is working. Grant NQ5T > On Jul 25, 2020, at 12:48 PM, Michael Gillen via Elecraft > wrote: > > My P3SVGA board is acting up and there is a blinking red light on the board > (did not notice that before because the lid was

[Elecraft] P3 SVGA board blinking red light

My P3SVGA board is acting up and there is a blinking red light on the board (did not notice that before because the lid was always on). Is the blinking red light bad? If yes, is there something I can do about it? My symptoms are that I am unable to successfully load the FPGAx firmware - it

[Elecraft] P3 SVGA kit

Looking for a P3 SVGA kit. If anyone has one for sale, please let me know. Thanks, Bob Hughes W7SNR Cave Creek, AZ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm

Re: [Elecraft] P3/SVGA Macro and USB

Hi Dave, Using the setup described at: https://www.nk7z.net/adding-external-keypad-k3/ I have been unable to swap to a KBD from the Genovation. I direct swap fails, so prior to purchasing a switch, do a manual replace to insure it works for you... Macro Loading is by hand, using that God

[Elecraft] P3/SVGA Macro and USB

I am in the process of getting a Genovation KeyPad working with the P3/SVGA but also want to have the keyboard available as I like to run RTTY and CW without the computer.  So I have a few questions: 1) Has anyone found a USB switch that would allow selectable use of a keyboard or the

[Elecraft] P3 SVGA Display issue

Hi all, I just finished installing and setting up the SVGA option for my P3. All appears to be working fine, except the spectrum is displayed differently on the monitor than on the P3 itself. The signals sit above the horizontal divider rather than immediately at it. When adjusting the ref

Re: [Elecraft] P3 SVGA Question

: Thursday, October 17, 2019 9:13:42 PM Subject: Re: [Elecraft] P3 SVGA Question I suspect that might be a function of the monitor. Why put a small image of the P3 on a big monitor. Just look at the small P3 image itself. Sent from my iPhone ...nr4c. bill > On Oct 17, 2019, at 5:10 PM,

Re: [Elecraft] P3 SVGA Question

I suspect that might be a function of the monitor. Why put a small image of the P3 on a big monitor. Just look at the small P3 image itself. Sent from my iPhone ...nr4c. bill > On Oct 17, 2019, at 5:10 PM, n...@n1ix.com wrote: > > I have a P3 with the SVGA option installed. > > Is it

[Elecraft] P3 SVGA Question

I have a P3 with the SVGA option installed. Is it possible to display the frequency spectrum in a window rather than using the entire monitor? 73 Dave N1IX __ Elecraft mailing list Home:

Re: [Elecraft] P3 SVGA Display Waterfall Contrast (Mark / WU6R)

On 6/23/2019 5:53 AM, Mark Wheeler via Elecraft wrote: I've recently noticed that I have almost no waterfall displaying on my 24" monitor which makes using the SVGA feature almost useless.  I thought maybe it was because of poor band conditions, but now I'm wondering if there is something that

[Elecraft] P3 SVGA Display Waterfall Contrast (Mark / WU6R)

I've recently noticed that I have almost no waterfall displaying on my 24" monitor which makes using the SVGA feature almost useless.  I thought maybe it was because of poor band conditions, but now I'm wondering if there is something that needs to be adjusted...  I used to have a near exact

Re: [Elecraft] P3 SVGA - measuring occupied bandwidth

On 5/23/2018 6:47 AM, Joe Subich, W4TV wrote: The greater difficulty is in measuring the occupied bandwidth of very narrow modes (e.g. JT65, JT9, FT8, RTTY or even CW) due to the 2 KHz minimum span of the P3 ... a 500 Hz span would be better for measuring narrow modes. Not so difficult at

Re: [Elecraft] P3 SVGA - measuring occupied bandwidth

On 5/23/2018 12:54 AM, Richard Lamont wrote: Jim - in this context, are you using the definition of "occupied bandwidth" as in ITU RR 1.153, i.e. 99% mean power? If so, how do you do that with the P3 SVGA? For CW, I transmit a long series of dits, put the P3 in peak mode, and accumulate

[Elecraft] P3 SVGA schematics and usb port

Hi, The SVGA schematics were missing at http://www.elecraft.com/manual/P3_svga_D_sch.pdf... I was trying to see if the 5 Vdc was available at the keyboard port to drive a SVGA to HDMI converter or if it needed to be turned on in software. I could not find this information in the manual. Other

Re: [Elecraft] P3 SVGA - measuring occupied bandwidth

On 2018-05-23 3:54 AM, Richard Lamont wrote: > Jim - in this context, are you using the definition of "occupied bandwidth" as in ITU RR 1.153, i.e. 99% mean power? If so, how do you do that with the P3 SVGA? Whilst it's not completely accurate, it is very easy to approximate the "occupied

[Elecraft] P3 SVGA - measuring occupied bandwidth

On 22/05/18 19:57, Jim Brown wrote: > Yes. AND in the hands of a knowledgeable engineer/technician, a near > lab-quality test instrument, with a display that can easily be > calibrated to the signal level at the antenna input. I've used it to > measure occupied bandwidth of transmitted signals to

Re: [Elecraft] P3 SVGA interference -

Mike, I don't think I have seen this as a suggestion so far in the thread. It is important that you dress the cables for the SVGA option exactly as shown in the installation manual. If they do not want to stay in place, use a ty-wrap around the cables. 73, Don W3FPR On 2/11/2018 12:50 PM,

Re: [Elecraft] P3 SVGA interference -

Somehow I managed to lose my last post describing the attached photo. suffice to say my Span is set for 14.000-14.104MHZ and my cursor is tuned to 14.029, but notice that the baseline noise level while near S-2 across most of the band, shows a hump back at the center of the screen and the

Re: [Elecraft] P3 SVGA interference -

I am almost overwhelmed by all the very thoughtful suggestions. Here's what I know so far. I had previously performed the idea of turning off all items in the room except for the radio and P3, but the reported symptom remains. I then switched my antenna switch to the grounded position, and the

Re: [Elecraft] P3 SVGA interference -

4:49 AM Subject: Re: [Elecraft] P3 SVGA interference - I have the P3 attached to a HP 23" flat screen. I power off the external monitor and still have the issue on the P3 internal monitor. I power off the monitor on two PCs in the room and power off the flat screen TV in the room. Still n

Re: [Elecraft] P3 SVGA interference -

I have the P3 attached to a HP 23" flat screen. I power off the external monitor and still have the issue on the P3 internal monitor. I power off the monitor on two PCs in the room and power off the flat screen TV in the room. Still no relief. I removed and reconnected all connections on the

Re: [Elecraft] P3 SVGA interference -

Hi Mike, Have you tried turning your monitor off? I've never had the issue you describe 73 Frank W3LPL - Original Message - From: "mjpilgrim" <mpilg...@bellsouth.net> To: elecraft@mailman.qth.net Sent: Saturday, February 10, 2018 8:32:03 PM Subject: Re: [E

Re: [Elecraft] P3 SVGA interference -

Mike, You didn't mention if you had a large monitor connected but consider that the noise you "see" may come from it or a TV your have connected. Do you see the pattern on the P3 also? Watch the P3 screen and turn the large monitor off and see if the signal disappears. Many of them do make a

Re: [Elecraft] P3 SVGA interference -

I wonder if this discussion and suggested ribbon clips address my issue. I acquired my K3 this past summer and then a P3 off of eBay shortly thereafter. I installed the SVGA adapter a couple months ago and I have a problem which sounds similar to what is described in this thread. For lack of a

Re: [Elecraft] P3 SVGA macro editor

Me too! Additionally, I think it would be great to have the ability to change, save, and read all settings, similar to K3_Ez. I've just spent 45 minutes walking a friend through various P3 settings. It would have been nice if I could have e-mail him a file to upload into his P3. The same would

Re: [Elecraft] P3 SVGA macro editor

I would love to see this also Dave K5MWR On 10/26/2017 10:10 AM, Chuck Teague via Elecraft wrote: Is there anything in the works to provide a macro editor for the P3 that allows creation and editing of the 50 macros in the SVGA? That would be really helpful and a vast improvement over the

Re: [Elecraft] P3 SVGA macro editor

I second that! I would LOVE a macro editor. 73s and thanks, Dave NK7Z http://www.nk7z.net On 10/26/2017 08:10 AM, Chuck Teague via Elecraft wrote: Is there anything in the works to provide a macro editor for the P3 that allows creation and editing of the 50 macros in the SVGA? That would be

[Elecraft] P3 SVGA macro editor

Is there anything in the works to provide a macro editor for the P3 that allows creation and editing of the 50 macros in the SVGA? That would be really helpful and a vast improvement over the present, very limited, editing capability. Chuck TeagueNN7U 

Re: [Elecraft] P3/SVGA Digital terminal questions

Hi Ken, 1) That is correct. The P3/SVGA does not actually decode any RF. All that is done inside the radio and you must choose between any of built-in modes, such as FSK-D, PSK-D or CW. 2) The manual instructs you to turn off text display ONLY if you're going to use the K3 or P3 Utility's

[Elecraft] P3/SVGA Digital terminal questions

I'm trying to assist a local with his K3S/P3/SVGA using the P3 terminal. I don't have the SVGA so trying to piece together the info using the manuals. A few questions for all you P3 Terminal Digital mode users: 1. The P3 terminal setup looks to be identical for all modes. Mode is apparently

Re: [Elecraft] [P3] SVGA Option: transmitted text not visible on external display

Ok thanks!Any Idea if this will be implemented in the future?I was convinced that this will be the same as with PX3 where this is implementedTechnically, no issue, right? 73, Adrian, DH1AHL __ Elecraft mailing list Home:

Re: [Elecraft] [P3] SVGA Option: transmitted text not visible on external display

Hi Adrian, The only way to view transmitted cw on the P3 transmit window would be by using an USB keyboard plugged into the rear of the P3. Paddles will not work. 73, Charles N2SO Treasurer, Quarter Century Wireless Association, Inc. http://QCWA.org On Saturday, April 15, 2017 7:21 AM,

[Elecraft] [P3] SVGA Option: transmitted text not visible on external display

Hello,I finally was able to set up the SVGA option in my P3 but I'm just wondering why when transmitting CW with my paddle text is not visible on the external display.Everything seems to be setup correctly.thanks for Your help Adrian, DH1AHL, 

Re: [Elecraft] P3 SVGA works, but text stops

Okay very strange problem. The keyboard would quit working but showed it had power to it. Then finally the waterfall stopped. I switched to dummy load to make sure it was not a rf problem, still did not work. I did a complete reset and still did not fix the problem. I took the case off of the

[Elecraft] P3 SVGA works, but text stops

Okay today I was working with the P3 as to my earlier post hihi. I was sending psk, rtty and cw with the keyboard connected to the P3. All of a sudden the keyboard stops responding to any key or command. The P3 and SVGA are still showing the bands and waterfalls and all is functioning right

Re: [Elecraft] P3 SVGA Scratch Pad

Thank you so much for the info. I guess I need to check and update my manuals a little more. Thanks again that is what I needed. Gerald - KC6CNN - Gerald K1 # 0014 K3 # 6294 KX3 # 757 -- View this message in context:

Re: [Elecraft] P3 SVGA Scratch Pad

] On Behalf Of KC6CNN Sent: Sunday, January 8, 2017 12:21 PM To: elecraft@mailman.qth.net Subject: [Elecraft] P3 SVGA Scratch Pad Does anyone know what the scratch pad is for? Or where does the information go that is entered in to the scratch pad? Is there a way to transmit this scratch pad info

[Elecraft] P3 SVGA Scratch Pad

Does anyone know what the scratch pad is for? Or where does the information go that is entered in to the scratch pad? Is there a way to transmit this scratch pad info? Thanks Gerald - KC6CNN - Gerald K1 # 0014 K3 # 6294 KX3 # 757 -- View this message in context:

Re: [Elecraft] P3 SVGA Feature Request

On Wed, 2016-06-15 at 12:02 -0700, KD3RF wrote: > It would be great if the VGA adapter showed tic marks and frequency > across > the top or bottom of the display screen every 10 kHz or so like in > this > mocked-up picture. > >   >

[Elecraft] P3 SVGA Feature Request

It would be great if the VGA adapter showed tic marks and frequency across the top or bottom of the display screen every 10 kHz or so like in this mocked-up picture. Scaling of the frequency display should change as bandwith is

Re: [Elecraft] P3 SVGA problem

Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Nr4c Sent: Sunday, May 15, 2016 12:03 PM To: Bill Cc: elecraft@mailman.qth.net Subject: Re: [Elecraft] P3 SVGA problem I suppose. But the monitor is what most users wanted in the beginning and more recent features weren't

Re: [Elecraft] P3 SVGA problem

I suppose. But the monitor is what most users wanted in the beginning and more recent features weren't even in their dreams when the manual was written Sent from my iPhone ...nr4c. bill > On May 15, 2016, at 10:21 AM, Bill wrote: > > Never mind - got help to move things

Re: [Elecraft] P3 SVGA problem

Never mind - got help to move things around and plugged a monitor into the SVGA port. All fixed. Too bad the instruction manual never explicitly state that requirement. Would have saved hours of time and effort. Bill W2BLC K-Line __

Re: [Elecraft] P3 SVGA problem

Hi Bill, No, no external monitor is used...  You should see a message pop up on the P3 screen, indicating a USB device has been plugged in, when you plug in a keyboard.  If this does not happen, and you are sure you are using a dumb keyboard, not a multimedia keyboard, then something is either not

[Elecraft] P3 SVGA problem

I installed the SVGA board in my P3 and am unable to access the terminal mode. In effect, the P3 operates as it always did prior to the SVGA installation - nothing is new. I have installed the latest firmware - for the entire station. I only bought the SVGA for macro uses - hence, did not

Re: [Elecraft] P3 SVGA questions

On 04/22/2016 12:08 PM, Mike Dodd wrote: 1. I found some 6" LCD monitors commonly used with Raspberry Pi devices. If a monitor is specified as VGA, will the P3 SVGA option drive it OK? The user manual seems to imply that it will, with the various display resolutions, but I'd like to be sure

[Elecraft] P3 SVGA questions

After being disappointed by the P3's inability to display decode CW and data text (as the PX3 does) without the SVGA option (that's definitely the BOO of the week!), I am now searching for a tiny monitor that won't wipe out half my remaining desk space. I have a couple of questions: 1. I

[Elecraft] P3/SVGA 1.60/1.34 General Release, Now Available

P3/SVGA 1.60/1.34 Firmware is now available as a general release. Please be sure to download, install and use the latest version of P3 Utility which can be found here: http://www.elecraft.com/software/P3/P3_Utility_Setup_1_16_3_15.exe Currently our tech writer is in the process of updating the

Re: [Elecraft] P3 - SVGA USB Serendipitous Solution

Hi Paul, My experience with the P3 SVGA is that the Genovation USB keypad will not work unless data mode is on. 73, Ken, K6LA / VY2TT __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help:

Re: [Elecraft] P3 - SVGA USB Serendipitous Solution

Hi Ken, Yes, the USB keyboard is not active when not in data display mode. I realize that folks are using the Genovation keypad as means of executing macros to control the K3 (and soon the P3), however the USB keyboard port was designed for data. -Paul Paul Saffren - N6HZ Project Manager

Re: [Elecraft] P3 - SVGA Save/Restore State via USB Working

Hi Ken, I am not familiar with the USB switch but if it is electronic and not mechanical there could be an issue since the SVGA USB port is limited as to what it can support. For example it does not support a hub or really anything except a USB thumb drive and/or keyboard. -Paul -- View

Re: [Elecraft] P3 - SVGA USB Serendipitous Solution

Hi Ken, I don't understand what you mean by 'toggle a USB device'. The P3/SVGA board will enumerate a USB keyboard or thumb drive even if the SVGA en is turned off (the display is turned off) OR data display mode is turned off. I just checked.You can verify that by opening up the P3 and

[Elecraft] P3 - SVGA USB Serendipitous Solution

It seems that if you toggle a USB device on the P3, it loses its knowledge of the USB device and doesn't recognize the device when it is toggled back UNLESS the SVGA is in data display mode. IMHO this is a firmware bug. 73, Ken, K6LA / VY2TT

Re: [Elecraft] P3 - SVGA Save/Restore State via USB Working

I too am looking forward to the next release of P3 software, and hoping it contains the changes which allow P3 macros to be sent to the P3, via the P3 USB port. -- 73's, and thanks, Dave For software/hardware reviews see: http://www.nk7z.net For MixW support see:

[Elecraft] P3 - SVGA Save/Restore State via USB Working

I have no idea why it didn't work before, but the SVGASET.SAV file was saved to the USB Thumb Drive about the 10th time I tried. It restored to my other P3 perfectly and now the USB switch is working also. Maybe I didn't have the cables plugged in all the way, although the P3 recognized the USB

[Elecraft] P3/SVGA help..

just received used SVGA board. Installed following the manual. Nothing on external display. tried 2 cables, 2 monitors. Upgraded firmware on P3 to current 01.54, svga is on 01.25; all SVGA menu options are accessible… but nothing on external display. Opened top of P3, the cable is

Re: [Elecraft] P3/SVGA help..

There are LEDs on the P3 front panel and on the SVGA board, both should be blinking. If you plug a keyboard or USB thumbdrive into the SVGA board, you should see another LED light up on the SVGA board. The next thing to try is a parameter reset on the P3. Do that holding down the MENU key and

[Elecraft] P3 SVGA adapter is sold

The subject line says it all. Jim/N1NK __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by:

[Elecraft] P3 SVGA help

My monitor reports "no signal" from my P3 SVGA. I've gone into the menu and enabled SVGA and set the resolution. Is there anything else I need to do? Thanks & 73, Barry N1EU __ Elecraft mailing list Home:

[Elecraft] Elecraft] P3 SVGA Self changing tracking mode

Re the SVGA off center bug. My fix is to put the fixed/tune menu control on a function button. Just hit the button after using the center control to reset the SVGA back to default. Rick W4GE __ Elecraft mailing list Home:

[Elecraft] P3 SVGA Self changing tracking mode

Hello all, I'm seeing an issue on the SVGA side of the P3. In order to utilize the screen space more effectively I often use the CENTER control to shift my TX frequency to the left side up the display (when the DX is listening up) to show those calling on the right side of the display.

Re: [Elecraft] P3 SVGA Self changing tracking mode

More data points: I usually use FixMode set to 'static' and FixTrack set to 'Fixed tune mode'. I don't know how that factors in... It may be another cause, but by cycling FixTrack, I can get it to display properly AFTER I recenter the display to start over again. This happens consistently

Re: [Elecraft] P3 SVGA Self changing tracking mode

Hi Rick, This is a known issue and on the P3/SVGA bug list. Basically what is happening is that the SVGA does not follow the center frequency adjustment correctly. Most folks just use fixed tune mode instead of tracking mode with a movable center frequency. Kind regards, Paul -- View

Re: [Elecraft] P3 SVGA Self changing tracking mode

Rick, I haven’t been able to duplicate what you describe. 73, Rick K6LE On Fri, Oct 30, 2015 at 8:26 AM, Rick WA6NHC wrote: > Hello all, > > I'm seeing an issue on the SVGA side of the P3. > > In order to utilize the screen space more effectively I often use the >

Re: [Elecraft] P3 SVGA Self changing tracking mode

Thank you Paul, I'll await a fix. Rick nhc On 10/30/2015 9:41 AM, Paul Saffren N6HZ wrote: Hi Rick, This is a known issue and on the P3/SVGA bug list. Basically what is happening is that the SVGA does not follow the center frequency adjustment correctly. Most folks just use fixed tune mode

[Elecraft] P3/SVGA Firmware 1.54/1.25 now available as general release

P3/SVGA firmware 1.54/1.25 is now available as a general release. This means you can simply use the P3 utility and press the "Copy new files from Elecraft" to download the firmware to your computer. *It's recommended that all customers and particularly those owning an SVGA card, download and

Re: [Elecraft] P3/SVGA Firmware 1.54/1.25 now available as general release

One other feature I forgot to mention regardking 1.54/1.25: When using the latest P3 Utility it is now possible to save and restore the P3 configuration. Using P3 Utility version 1.15.8.28 you'll see another tab labeled "Configuration." Clicking on this tab allows you to save or restore the

Re: [Elecraft] P3 - SVGA Monitor Compatibility Suggestions

Thank you for your responses. I ended up returning the Samsung and got an ASUS. Issue resolved. The ASUS handles the P3 output in all resolutions with no issues. I could not adjust the screen size with the Samsung, only the centering of the image. Extra benefit - the ASUS ended up being $50

Re: [Elecraft] P3 - SVGA Monitor Compatibility Suggestions

, 2015, at 3:39 PM, Gary K9GS <garyk...@wi.rr.com> wrote: Hi Marty Which model Asus did you get? 73 Gary K9GS Original message From: Marty <mtkos...@gmail.com> Date: 09/01/2015 1:27 PM (GMT-06:00) To: elecraft@mailman.qth.net Subject: Re: [Elecraft] P3 -

Re: [Elecraft] P3 - SVGA Monitor Compatibility Suggestions

Original message > From: Marty <mtkos...@gmail.com> > Date: 09/01/2015 1:27 PM (GMT-06:00) > To: elecraft@mailman.qth.net > Subject: Re: [Elecraft] P3 - SVGA Monitor Compatibility Suggestions > > Thank you for your responses. > > I ended up returning the Sa

[Elecraft] P3 - SVGA Monitor Compatibility Suggestions

I just purchased a new Samsung 23.6” LED HD Monitor for my P3. Unfortunately I get the two black bars on each side of the screen when I set the resolution to 1920 X 1080 (1920 x 1080 alt fills the screen but clips the image on all four sides). I had read somewhere that the black bars

Re: [Elecraft] P3 - SVGA Monitor Compatibility Suggestions

- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Marty Sent: Tuesday, September 01, 2015 10:49 AM To: elecraft@mailman.qth.net Subject: [Elecraft] P3 - SVGA Monitor Compatibility Suggestions I just purchased a new Samsung 23.6” LED HD Monitor for my P3. Unfortunately I get

Re: [Elecraft] P3 - SVGA Monitor Compatibility Suggestions

I use a AVerMedia C126 Capture card so I can put it in a windows and display it on my existing monitors. From: Marty <mtkos...@gmail.com> To: elecraft@mailman.qth.net Sent: Tuesday, September 1, 2015 10:49 AM Subject: [Elecraft] P3 - SVGA Monitor Compatibility Suggestions

Re: [Elecraft] P3/SVGA Beta 1.54/1.25 now available

Thanks, Paul. I just loaded the new beta to my P3 (no SVGA) and it all seems to be working well with K3 s/n 4668 with latest firmware. I don't have any way to check the new transmit monitor trigger level because the K3 is my sole HF rig. 73, Steve W4FMD On 8/19/2015 6:35 PM, Paul Saffren

Re: [Elecraft] P3/SVGA Beta 1.54/1.25 now available

Glickstein Sent: Thursday, August 20, 2015 11:13 AM To: elecraft@mailman.qth.net Subject: Re: [Elecraft] P3/SVGA Beta 1.54/1.25 now available Thanks, Paul. I just loaded the new beta to my P3 (no SVGA) and it all seems to be working well with K3 s/n 4668 with latest firmware. I don't have any way

[Elecraft] P3/SVGA Beta 1.54/1.25 now available

This release adds features and fixes some bugs with the P3TXMON accessory board.We're trying to get this firmware into general release as soon as possible so even if you don't have the P3TXMON, you can still help us by loading this new firmware in your P3/SVGA. Please email me directly

Re: [Elecraft] P3/SVGA Beta 1.54/1.25 now available

I accidentally put in the wrong file name in the BETA firmware download/install instructions. The file name you should download is: P3-0154_SVGA-0125.ZIP (it's the only file in the beta ftp directory) -Paul Paul Saffren - N6HZ Project Manager Elecraft Inc. www.elecraft.com

[Elecraft] P3/SVGA Beta 1.50/1.24 now available (P3TXMON)

New BETA firmware for the P3/SVGA is available for download from HERE ftp://ftp.elecraft.com/P3/firmware/beta/P3-0150_SVGA-0124BETA.zip This release includes support for the new Elecraft P3TXMON accessory board. Please refer to the P3/SVGA Manual Rev E

Re: [Elecraft] P3 SVGA - Spurious Spike

There was also a problem with the BNC cable feeding the P3. I experienced that and merely changed to a mil spec cable. That cured the problem. No idea what caused the problem, but that cured it. Bill W2BLC K-Line __ Elecraft mailing

Re: [Elecraft] P3 SVGA - Spurious Spike

Hi Ted, Do an archive search for the string: SVGA ribbon cable Review the posts and see if they bear any similarity to what you are now experiencing. I think the gist of the thread was that placement of the ribbon cable could be the cause of spurious spikes. 73, Mike K2MK Dauer, Edward

[Elecraft] P3 SVGA - Spurious Spike

Just installed the SVGA option in the P3 and have an odd spike appearing on the screen. Any help would be appreciated. Here are the symptoms: The spike appears at 11.8 KHz above the VFO A frequency, and stays at that distance as VFO A is tuned - that is, it moves as VFO A moves. It appears on

[Elecraft] P3 (+SVGA) freeze update

One observation: I too have found the newest firmware to be much better. But I had it freeze once and it didn't seem like it was ever coming back. I didn't time it but it must have been stuck for at least 10 or 15 seconds. I tapped my foot switch to briefly flick the K3 in and out of transmit,

Re: [Elecraft] P3 (+SVGA) freeze update

I have been 'fighting' P3 freezes for a long time. Mostly mine have seemed to be RFI related. I recently implemented most of Jim Brown's RFI prevention suggestions, bonding, ferrite chokes, interconnected earth grounds, pin-1 problems, etc. and they have made a big difference. The freezing is not

Re: [Elecraft] P3 (+SVGA) freeze update

Hi Carl, I too am still experiencing occasional freezes. Typically 1 to 2 seconds in length. I'm going to guess that the improvement is on the order of 95%. I think the problem was described as the way in which the K3 tells the P3 that it is coming out of transmit. You would think that if the

Re: [Elecraft] P3 SVGA in Split

Hi Tighe, I was able to repeatedly duplicate what you described. I think you found a bug. First, we should get the nomenclature correct. You don't mean VFO A Marker you mean VFO A Cursor. And the problem only occurs in Tracking mode. And the problem is not just caused by pressing the Spot

Re: [Elecraft] P3 SVGA in Split

I confirmed the error. It's on the bug list, thanks. Alan N1AL On 02/08/2015 07:26 AM, Mike K2MK wrote: Hi Tighe, I was able to repeatedly duplicate what you described. I think you found a bug. First, we should get the nomenclature correct. You don't mean VFO A Marker you mean VFO A

[Elecraft] P3 SVGA in Split

Just noticed something odd with the latest P3 SVGA code (1.35/1.22). Am split on 80m. Held the P3 button for Center and rotated the knob so VFO A was closer to the left side of the screen then tapped the button again. All was fine until I tapped Spot on the K3. Then the VFO A marker on the

[Elecraft] P3 SVGA

 I still have a SVGA board for sale.  Only used about 5 hours.Sold the P3 without it.  P3SVGA P3 Video/FFT adapter   $230.00 PLUS $5.00 shipping to lower 48 States  Keith, KV5J, XE3/K5ENS nelasat@yahoo.comke...@kathyandkeith.mx __

Re: [Elecraft] P3 SVGA WaterFall Marker Issue

Hi Tighe, Thank you for detailed steps for reproducing the problem. I was able to find the bug quickly and fix it for the next beta/release. 73, Paul -- View this message in context: http://elecraft.365791.n2.nabble.com/P3-SVGA-WaterFall-Marker-Issue-tp7597230p7597269.html Sent from

[Elecraft] P3 SVGA WaterFall Marker Issue

Just loaded the latest P3 Beta to get WaterFall Markers. Thanks for the feature. But... I noticed a curious behavior. Using the button on my P3 which is programmed for WfallMkrs I noticed it's not controlling the SVGA marker as it does the P3 display marker. If I start with VFO A Marker

Re: [Elecraft] P3 SVGA WaterFall Marker Issue

Two more observations. If I turn the Waterfall Marker on and have it displaying on both P3 and SVGA then tap the assigned button to turn the Waterfall Mark off, it stops displaying on the P3 but on the SVGA where the marker is displaying the marker stays with the VFO frequency. If I turn the

Re: [Elecraft] P3 SVGA

Bump on this. Just checked and p3s0116 is still the most recent release for the P3 SVGA. Tighe NK4I On 6/2/14 1:56 PM, Sam Morgan wrote: SVGA Latest Production Release (MCU 1.16) February 27, 2013 any chance of the beta's being released to the masses? I know p3s0119 already addresses the

[Elecraft] P3 SVGA external monitor freezes - RFI?

When using KPA500 my external monitor (and the P3 display) often freezes, sometimes up to 5 seconds, after I transmit. With the external display disabled, the P3 does not freeze (and incidentally it refreshes much faster without the ext monitor enabled.) I also notice a slight flickering of the

  1   2   3   4   >