Re: [Elecraft] Elecraft website and Fios

What are you using for a browser ? I'm in the middle of Pennsylvania, using Windows 10 with the latest build, with Firefox, and it comes up quickly. According to YSlow, it has an overall Grade A for performance. Again, it appears that the issue is limited to Verizon users in parts of the co

[Elecraft] Elecraft Website

the issue to a higher priority. 73 Neil Zampella KN3ILZ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by

Re: [Elecraft] suggested PC???

ernet. Neil Zampella KN3ILZ On 1/5/2016 8:14 PM, Gary K9GS wrote: Hi Jerry, Don't use a wired network. I had my shack computer on a wired network when I took a lightning hit a couple of years ago. Everything connected on the wired network was zapped (2 PCs, router, modem, K3 RS-232 po

Re: [Elecraft] Lightning Protection (was-Re: suggested PC???)

more than a 60 foot end fed :) 73s, Neil Z. KN3ILZ On 1/6/2016 12:52 PM, Barry Baines wrote: Neil: On Jan 6, 2016, at 8:25 AM, Neil Zampella wrote: FWIW ... I've got everything setup wired in the shack, but everything (cable coax, ethernet, power) runs through an uninterruptib

Re: [Elecraft] Elecraft Website back up today for Verizon FiOS & DSL customers

Well, as of 12:33 am here in PA, the new IP address was the one the local DNS computer replied with. And I have to say, it does load fast! Now, if you'd like to update the look of the site, and add a good shopping cart, we should talk :) Neil Z. KN3ILZ On 1/8/2016 8:14 PM, Eric Swartz - W

Re: [Elecraft] USB Soundcard

I'm currently using a Creative Labs Sound Blaster SB1095 with my laptop and the KX3. I bought the KX3-PCKT cable set when I bought the kit, made it much easier not having to worry if the cables would work or not, for $19.95 it was a no brainer. The SB1095 works well with WSJT-X for JT modes,

[Elecraft] K2 Power Switch modification

Just a heads up: I'm putting together another K2, and planning to build this as a base rig keeping it all low power with the battery option. I got to the part where I'm setting the initial parts on the RF board, then plugging in the front board, and the control board, to the RF board. Discov

[Elecraft] K2 Alignment & Test Part II

Hi, Started to do the Align/Test Pt II, and properly saw the correct frequency of 12090 +/- 30 kHz.   Tried the next part to adjust the Reference Oscillator using my other K2 as the receiver and was able to hear the oscillator at 3999, but C22 would not adjust to a zero-beat. OK ... so it was

Re: [Elecraft] K2 Alignment & Test Part II

Range Test, then get a replacement Q19 from pa...@elecraft.com. Merry Christmas everyone. 73, Don W3FPR On 12/24/2019 6:19 PM, Neil Zampella wrote: Hi, Started to do the Align/Test Pt II, and properly saw the correct frequency of 12090 +/- 30 kHz.   Tried the next part to adjust the Refe

Re: [Elecraft] K2 Alignment & Test Part II

Don, I installed the 12pF cap as suggested didn't help, so I'm going to request a replacement Q19. Thanks, Neil, KN3ILZ On 12/25/2019 3:24 PM, Neil Zampella wrote: Don, Thanks, I'll work on that tomorrow and let you know how it goes. Merry Christmas!! Neil On 12/25/201

Re: [Elecraft] KE6D K2 Software

OK ... you're talking about the K2"S" software ... kinda confusing there for a sec. The program has not been updated (as far as I can tell) since 2003.    Have you tried running the program under COMPATIBILITY MODE?   Right click on the software's icon to bring up the menu and select PROPERTIES. 

Re: [Elecraft] K2 FT8

I've used my K2 to work WSJT-X modes for a year now, using the external speaker audio out, and a cable connected to the mic for audio in. They connect to a $10 USB soundcard from Amazon.The rig is connected using the AUXBUS serial cable, to a USB adapter to the computer, which runs DXLabs Comm

Re: [Elecraft] anyone recommend where to buy a SERIAL to USB cable for a k3

FWIW .. he's looking for a K3 cable .. DX Engineering only carries the KXUSB cable for the KX3. Neil KN3ILZ On 1/25/2020 7:00 PM, Dave wrote: I ordered my KXUSB-A cable from DX Engineering. Closer to me, faster shipping. I see you have a 6 area call. If you are in CA then ordering from Elecraf

Re: [Elecraft] Elecraft Digest, Vol 190, Issue 22 Open Office etc

Jim if all you're using Open/Libre Office for is creating PDFs, you may want to look at the PDF printer driver from Software995.com.    Its free (with ads) but if you want to pay the $9.95, its yours for life.    I use it for all my work, and I create a LOT of PDFs as records of transactions in m

Re: [Elecraft] Where is Elecraft Support ?

Exactly Jim.   Elecraft had to discontinue their 60 meter adapter (K60XV) for the K2 as a key part is no longer available, and it would require a major board change to continue providing the same functionality. Evidently they no longer sell enough of that option to make it fiscally possible.

Re: [Elecraft] K4???

Wayne, quick question ... I am giving very serious consideration to a K4, but the kit version.   Assuming the new timeline on the factory version works out, should we expect a kit by Sept 2021? Thanks, Neil, KN3ILZ On 5/16/2020 1:15 PM, Wayne Burdick wrote: Mike, K4HDs will take longer. We w

Re: [Elecraft] Elecraft Digest, Vol 193, Issue 29

To unsubscribe .. you need to follow the directions at the bottom of every message: To subscribe or unsubscribe via the World Wide Web, visit http://mailman.qth.net/mailman/listinfo/elecraft or, via email, send a message with subject or body 'help' to elecraft-requ...@mailman.qth.

[Elecraft] KPA100 No Longer Available

Hi all, I saw that the K2 100w tuner accessory, the KAT100  is no longer available and discontinued.   I'm guessing its due to the permanent unavailability of a through part.    I'm wondering if Wayne or Eric could comment on this, and if there's any suitable replacement for that tuner? Neil, KN

[Elecraft] KAT100 No Longer Available, was KPA100 No Longer Available

Sorry for the confusion ... wasn't thinking when I typed out the subject line.  Thinking KAT100 typed KPA100, then sent it  :( Neil, KN3ILZ On 6/4/2020 3:32 AM, Neil Zampella wrote: Hi all, I saw that the K2 100w tuner accessory, the KAT100  is no longer available and discontinued. 

Re: [Elecraft] K4 cables

Probably not .. but you can get CAT6 cable (which will work with CAT5 connections) at Amazon at various cable lengths if you don't have one lying around. https://tinyurl.com/ycrsycwg Neil, KN3ILZ On 6/15/2020 11:12 AM, Joseph Trombino, Jr wrote: Howdy Gang. Does anyone know if the K4 will shi

Re: [Elecraft] CODEC

Jim, I use PTT with both my K2 and my KX3, its just one additional USB connection to the PC.  The other is to my external USB soundcard which does audio for both. Neil, KN3ILZ On 10/2/2018 4:20 AM, Jim Brown wrote: On 10/1/2018 10:47 PM, Rick WA6NHC wrote: While thousands may use VOX I'

Re: [Elecraft] CODEC UPDATE & CLOSE

Mike, I had heard anecdotal stories about Xfinity modems and ethernet connections to non-computer equipment.  I actually had one customer who had the problem, I took a spare Linksys router, and connected it between the Xfinity modem, and the equipment, and that fixed the issue for my customer

Re: [Elecraft] Worldwide Transceiver Survey

Might have more to do with the fact that ICOM is a supporter/advertiser on that site .. LOL Neil, KN3ILZ On 10/3/2018 11:51 AM, Charlie T wrote: You know, I'll bet the reason Icom is #1 in this survey is just possibly, I'm going out on a limb here, they got more votes. Along the same lines,

Re: [Elecraft] Worldwide Transceiver Survey

surprised that Yaesu and Kenwood are not ahead of Elecraft... but what does it matter anyway. I don't know a soul who would sell their Elecraft rig just because of the results of that "survey". Dave - K9FN On Wed, Oct 3, 2018 at 11:26 PM Neil Zampella <mailto:ne...@techie.com>

Re: [Elecraft] K3 FT8 Problem VP6D

FWIW ... K1JT in the FT8 DXPedition mode user guide specifically says, if you can't hear the DXPedition station, don't call them. Item #7 for hounds says: "Please do not call Fox if you are not receiving his transmissions. Do not call Fox if he issues a directed CQ (“CQ EU”, “CQ 7”, …) and your

Re: [Elecraft] K3 FT8 Problem VP6D

Considering that Joe Taylor has specifically said that v2.0-RC3 will default to 77 bit messages in DXPedition mode and should not be used for any DXPeditions until after the final General Availability release; and VP6D on the website's FT8 operating procedure page asks that v1.9.1 be used SPECI

Re: [Elecraft] Cableing for KX3 to HRD

Nope .. just the KXUSB cable .. does it all. On 11/16/2018 9:34 AM, John Pierce wrote: Is there any special cableing required to use HRD software with a KX3? John, AD2F --- This email has been checked for viruses by AVG. https://www.avg.com

Re: [Elecraft] Cableing for KX3 to HRD

1/16/2018 10:59 AM, Neil Zampella wrote: Nope .. just the KXUSB cable .. does it all. On 11/16/2018 9:34 AM, John Pierce wrote: Is there any special cableing required to use HRD software with a KX3? John, AD2F --- This email has been checked for viruses by AVG. https://www.avg

Re: [Elecraft] KX3/SignaLink issues....

Tom, I've been using my KX3 for digital work for years.  I second Don's advice about using the KXUSB cable for CAT control.  The Signallink is nothing but a external Sound Card, a very expensive soundcard. Since you already have it use it, but my advice on sound interfacing is this.  Ditc

Re: [Elecraft] Chrome OS and Elecraft Utilities

A Chromebook will not run the utilities.    I'm fairly sure Chromebooks run on a version of Linux, but you're limiting yourself to a lot of 'cloud based' stuff. Look at a AMD powered laptop, a bit cheaper than an Intel, but you often get more bang for the buck. Neil, KN3ILZ On 11/30/2018 9:

Re: [Elecraft] Flummoxed about my antenna

Mike, the reflector includes attachments to the digest (if that's how you get it), you just find the attachment with the post you want to reply to, double click on it, it 'should' open as another email.   You then click on the reply button... and write your reply. Does this help? Neil, KN3I

Re: [Elecraft] Receiving Digest

John, I think you have to go to the 'mailman' page to verify your settings.  Look at the bottom of the page, where it says "Elecraft Subscribers", and enter your email address in the line that says 'To unsubscribe from Elecraft, get a password reminder, or change your subscription options ent

Re: [Elecraft] Opportunism, bravery, insanity: putting the "eXtreme" in Elecraft's KX and AX gear

It went QRT in April when it returned to Hawaii.  If they send it out again, it'll probably run 2.0 :) Neil, KN3ILZ On 12/18/2018 5:02 PM, Bob N3MNT wrote: How about KH6JF/MM? Is KH6JF/MM running 2.0 or 1.9 ? -- Sent from: http://elecraft.365791.n2.nabble.com/ --- This email has been

Re: [Elecraft] Opportunism, bravery, insanity: putting the "eXtreme" in Elecraft's KX and AX gear

FWIW ... easier said than done, there's a lot more to it than there is to CW, RTTY, or even PSK. Neil, KN3ILZ On 12/19/2018 9:44 AM, Andy McMullin wrote: I’d vote for that idea too! Regards Andy, G8TQH On 19 Dec 2018, at 14:36, Bob N3MNT wrote: Maybe add WSJT-X capability to PX3 -- Sen

Re: [Elecraft] K2 with KPA-100

Gene ... if you were planning to buy a K2 kit,  you should do that.   It was a pleasure, and a lot of fun to put together.   The KAT2 will not work with the KPA100 option for the reason Don pointed out also, and Don correct me if I'm wrong, I'm not sure its rated for more than 20w. The KAT10

Re: [Elecraft] K2 100 Tuner question

You know, the point is moot.   I would assume that Wayne & Eric looked at getting a replacement vendor, but then after getting bids based on the sales history of the EC2, they determined that it would not be feasible at the price point they wanted to sell them at. Now, it would be great if the

Re: [Elecraft] Off-topic, but I need help.

FWIW .. I've got my K2/100 running FT8 right now ... just in time for the next RTTY contest where its a new mode :) Neil, KN3ILZ K2/100 SN: 7788 KX3 SN: 6596 On 12/29/2018 7:05 PM, Phil Kane wrote: On 12/29/2018 12:14 PM, W2xj wrote: It is just that too many do not seem to have fully grasped

Re: [Elecraft] Ideas for an FT8 Radio

As long as the developer is using any part of the WSJT-X code it cannot be added to closed source firmware.    It doesn't matter that it can be done. It would be in violation of the GPL Neil, KN3ILZ On 12/30/2018 8:59 PM, John Harper wrote: Here's the thread - scroll down to message #27527:

Re: [Elecraft] Ideas for an FT8 Radio

Carl, you tell that to Joe Taylor, who himself has said he uses the power it takes to make the contact, especially on EME and Meteor Scatter. It is not a low power mode.  For some people using 500w from California results in a - 19 report from  Israel.    That is a weak signal. You use what

Re: [Elecraft] KX3 and RPi DRAWS hat?

FWIW .. I just run the Raspbean .deb of WSJT-X v2.0, the KXUSB for CAT control,  and a cheap USB soundcard with my KX3.   The hat does me no good, as I'd have to find an adapter cable to use the DIN connectors.   The USB soundcard just cost me $9.00 or so. Neil, KN3ILZ On 1/2/2019 7:42 PM, Th

Re: [Elecraft] Suggested prices?

Michael, If I were still living in Ashburn, I'd be down to your house with a check for around $800.00 in about a half hour for the K2.  New it costs about $1,000.00, the tuner an additional $220.   You didn't give the Serial Number of the rig and I'm guessing its a KAT2 tuner? As someone els

Re: [Elecraft] K2 VCO Alignment T5 L30

Tom, welcome to the club.   I think anyone who has put together a K2 has such stories.   In my case I had installed U4 backwards and did not notice it as the chip has a very pronounced 'dimple' on one end which (for some reason) made me overlook the notch on the other end.    I spent a week tryin

Re: [Elecraft] Will there be a K4

FWIW .. the FT8 code is not 'open source' it is under the General Public License v3.   According to the GPL v3 FAQ: "You cannot incorporate GPL-covered software in a proprietary system. The goal of the GPL is to grant everyone the freedom to copy, redistribute, understand, and modify a program. I

Re: [Elecraft] Rework Eliminator Gone in 5 minutes

I need to change from a digest version of the list ... :( Neil, KN3ILZ On 4/15/2019 1:41 PM, EricJ wrote: Free Rework Eliminator "sold" in 5 minutes. Free really works! Eric KE6US --- This email has been checked for viruses by AVG. https://www.avg.com _

Re: [Elecraft] [K2] Rig Control Error

Phil, I've got my K2/100  running under Win10 using DXLabs Commander.    I could never get WSJT-X running the K2 directly using the built in Hamlib settings, or with Omnirig or Flrig.    It works fine, and I was able to create custom controls for Commander to adjust the power if I'm running r

Re: [Elecraft] Macbook Pro, K3, FT 8 audio quits

Just a heads up ... on WSJT-X, there is an updated v1.9.0-RC3 on K1JT's website that WILL be needed for the 'Fox & Hounds' live test this coming Saturday, April 7th.   It has many fixes for the DXpedition mode. Neil, KN3ILZ On 4/3/2018 2:52 PM, John Stengrevics wrote: Sorry, I should have ad

Re: [Elecraft] 15% discount KE7X book

Hi Fred, I've got your great KX3 book, and your 'assembling the KX3 line station' book (from Lulu).   Did you ever create a K2 book, and if so, is it still available anywhere?? 73, Neil, KN3ILZ On 4/6/2018 8:35 PM, Cady, Fred wrote: www.lulu.com has a 15% discount going o

[Elecraft] K2 - Issue after installing K60XV

Hi all .. has anyone seen this type of issue with their K2.   Before installing the K60XV, I had no problems seeing 10 w on 40 meters.   After installing the K60XV, I can't get above 1 watt on 40 meters OR 60 meters. Did I screw something up, or is there some menu setting I missed when I did

Re: [Elecraft] K2 - Issue after installing K60XV

d, be certain the change KAT2 R6 to 470 ohms, there is a resistor provided in the K60XV kit for that. 73, Don W3FPR On 5/20/2018 11:27 PM, Neil Zampella wrote: Hi all .. has anyone seen this type of issue with their K2.   Before installing the K60XV, I had no problems seeing 10 w on 40 meter

Re: [Elecraft] K2 Build: Options Advice

I just finished my K2 build, with all the options and Agree with Peter, there if you buy the options now, the K2 manual will point out just when you should install the various plugs and other components during the main K2 build. My advice, all the K2 manuals are online as PDF at the Elecraft

Re: [Elecraft] Boldly OT: 6 meter Sporadic-E season and the FT-8 microjuggernaut

Considering that FT8 is done with 8-tone frequency-shift keying (8-FSK) at 12000/1920 = 6.25 baud.   I'd like to know how you can get that tone in CW? As far as the S/N threshold of the various WSJT-X  modes (from the protocol specs in the WSJT-X user guide): FT8  : -21 JT4A         :

Re: [Elecraft] Please take me off the Elecraft email list...

FWIW .. you can do it yourself by heading to this url: http://mailman.qth.net/mailman/listinfo/elecraft Neil, KN3ILZ On 6/3/2018 7:52 PM, Greg Neely wrote: Thanks. 73 KL4JN __ Elecraft mailing list Home: http://mailman.qth.net/m

Re: [Elecraft] What to check when FT8 won't transmit (K3, Signalink)

So you're saying that if you select K3 as the rig, and PTT to use CAT, you get error messages? FWIW .. FT8 mode DEFINITELY needs CAT control, especially if you're going to be chasing any DXpeditions as they will be using the Fox & Hounds mode.   It also makes sure that when you send spots to P

Re: [Elecraft] Please unsubscribe from list

Rick .. you can do this by going to this URL and unsubscribing your self: http://mailman.qth.net/mailman/listinfo/elecraft On 6/5/2018 3:36 PM, Rick Chilcote wrote: __ Elecraft mailing list Home: http://mailman.qth.net/mailman/list

Re: [Elecraft] KAT500 Utility for MAC

Um ... just a heads up to the Elecraft folks, the older 1.13.6.17 version is the only version that's shown on the Firmware & Software page on the Elecraft website. Neil, KN3ILZ On 6/8/2018 8:23 PM, John Hiatt wrote: Does it have to be that old version? The current version is at: http://www

Re: [Elecraft] K2 Build: Requesting Tips and Tricks

I just finished mine, and its loaded. I agree with all the previous advice, I picked up another 40 drawer parts cabinet for the parts, used them both,  and kept them in order that way.  Each board had its own area of the cabinets,Packing Box bag in one area,  Control Board in the next, RF boar

Re: [Elecraft] k2 kit progress - Woops! Did I really do that?

Yep .. been there, .. done that ... waited for the replacement from California ... ... and as Richard points out, finished mine with timely advice from Don. FWIW .. its often faster to email to supp...@elecraft.com, as Don usually answers within a few hours or less. Neil, KN3ILZ On 6/29/2

Re: [Elecraft] K3 and WSJT-X Split operation.

I can backup Don's statement about the K2. I have my K2/100 working reliably with the KAT100, connected to the PC using a serial to USB adapter.   Using the DXLabs DX Commander to control the rig, and interface with WSJT-X, PTT is through CAT. I can even work remotely using VNC, as the DX Com

Re: [Elecraft] K2: The green glow returns!

Wayne, you've almost made me want to order another K2 kit, even though I just finished one.    That said, if anyone has one they want someone else to build .. hi hi. Neil, KN3ILZ On 6/29/2018 5:21 PM, Wayne Burdick wrote: A few years ago, in a distant land known for its modular seafood del

Re: [Elecraft] Mail List Procedure Question

Lee, I get the digest too, and the Elecraft reflect includes the messages as attachments.  I'm not sure what email program you're using, as I use Thunderbird, and it does this. What I do is if I find a message I want to reply to I look at the list, get an idea of which message it is in the a

Re: [Elecraft] FT8: "Magic radio"?

Andy, that's not right ... you have to be in the shack to make sure the system keeps calling as there is a 2 minute timer that will turn off your transmission. It is also suggested that if you don't get a reply back after the first two minute period, manually move the Tx freq. Finally, o

Re: [Elecraft] FT8: "Magic radio"?

Mike, the only automation is in the middle of the contact, the operator has to be in front of the radio and computer in order to select a station to answer,  to begin transmission, and to log the QSO. None of that is automated in WSJT-X.   I cannot speak for other programs that have gone bey

Re: [Elecraft] FT8: "Magic radio"?

Wes, you're taking that out of context.   The structured messages allow for redundancy if some of the original message is missing. The decoder can take the sync symbols so that the system can understand what type of message it is, it still needs the callsign and signal report. More details c

Re: [Elecraft] FT8: "Magic radio"?

.. and if you add JT-Alert to the mix, it can do the QRZ lookup for you .. Neil, KN3ILZ On 7/3/2018 5:32 PM, Carl Yaffey wrote: On Jul 3, 2018, at 4:42 PM, Grant Youngman wrote: and don’t care to find out what the other guy’s name is or what he/she does when they aren’t punching at their o

Re: [Elecraft] KX3 Using FLDigi to send CW

Aaron, you really don't need the Signalink, just two stereo audio cables (I used the ones in the KX3-PCKT cable set) a good soundcard in your PC or an external USB soundcard, and the KXUSB cable that comes with the KX3. This gives you the audio input/output you need, and the CAT control need

Re: [Elecraft] KX3 Using FLDigi to send CW

Bill, true, but he was asking about FLDidgi to send CW ... Neil, KN3ILZ On 7/5/2018 9:25 PM, Bill Rowlett wrote: With the Elecraft USB cable, your computer, you send CW from your keyboard. The beauty of the KX3. On Jul 5, 2018, at 7:11 PM, Neil Zampella wrote: Aaron, you really don&#

Re: [Elecraft] KX3 Using FLDigi to send CW

TY or PSK. Keep it simple. 73 and good DX KC4IM On Jul 5, 2018, at 9:27 PM, Neil Zampella <mailto:ne...@techie.com>> wrote: Bill, true, but he was asking about FLDidgi to send CW ... Neil, KN3ILZ On 7/5/2018 9:25 PM, Bill Rowlett wrote: With the Elecraft USB cable, your compute

Re: [Elecraft] KX3/fldigi/USB sound card

Jim There is no added complexity of PTT using CAT at all.  The KX3 (and K2 for that matter) is just triggered by CAT commands, and not VOX. I've cot CAT control of PTT on my KX3 and K2, and all I had to do was plug in the K2's serial cable, and the KXUSB for the KX3. Even my IC-718 (now in s

Re: [Elecraft] [K2] Problem in setup for WSJT

Hi Don & Phil, I have my K2 setup for WSJT-X and found that the K2 settings in the Hamlib3 version in WSJT-X do not seem to work properly.   What I did was use DXLab's DX Commander as the rig interface, so it is talking to the K2, and then I have that selected as the 'rig' in WSJT-X. This gi

Re: [Elecraft] KX3 & Signalink Not Transmitting

Paul, I understand you're not wanting to use the PC Sound Card for Digi, as too often Windows sounds get into the transmission. FWIW .. you really don't need a Signalink with the KX3, but since you already have it I can understand your using it. In future if you want to take the KX3 for d

Re: [Elecraft] WSJT-X Band Following

One thing to add ... once you have the CAT control setup properly, you should change bands via WSJT-X, as it will control the band changes on the rig, not the reverse. Neil, KN3ILZ On 9/12/2018 6:15 PM, Don Wilhelm wrote: Richard, You must have communications between WSJT-X and the K3S in o

Re: [Elecraft] Running WSPR on KX3 using a Mac

WSJT-X v1.7 (and 1.6) has WSPR built-in, if you have WSJT-X working then use it for WSPR mode, as K1JT has indicated that there will not be further work on the separate program. All Elecraft transceivers are supported out of the box for rig control by v1.7. WSJT-X v1.7 is in release, no

Re: [Elecraft] K4: Coolness factor meets production complexities

This is why I'm going to patiently wait for the K4 kit release, along with putting money aside for it. I suspect that along with the other engineering challenges, y'all are working on putting together the instructions for a proper kit build. While it won't be as complex as a K2, it will proba

Re: [Elecraft] Anyone try K4 with JTDX or WSJT-X?

Just checked with WSJT-X v2.3.1 (and v2.4.0-RC4 beta), they both have the latest Hamlib updates, and the K4 is listed. Neil, KN3ILZ On 4/7/2021 2:49 PM, Paul Van Dyke wrote: Andy Yes, but Before I left on my business trip the K4 designation was not there yet. But it worked fine with a K3S..

Re: [Elecraft] OT - WSJT-X & K3s

HI all .. As a KX3/PX3/KXPA100 owner, with over 1,000 JT65/JT9/FT8 QSOs in my log, I can honestly say the only things you need to run WSJT-X on your KX3 are these: 1.  Good Soundcard with a 48kHz DVD quality input/output.  I use a Sound Blaster SBx pro USB soundcard picked up from Amazon.  T

Re: [Elecraft] OT - WSJT-X & K3s

If you're using your USB interface cable, such as the KXUSB for the KX3, there's no need to have VOX to trigger anything. The only problem with VOX and the soundcard is if you have only one soundcard, and you also have Windows sounds going to it. Neil, KN3ILZ On 9/5/2017 8:39 AM, Wes Stewart

Re: [Elecraft] OT - WSJT-X & K3s

Easy fix .. but you should hear some of the audio being Tx along with FT8  :( Neil, KN3ILZ On 9/5/2017 5:29 PM, Nr4c wrote: Go to the Mixer in Windows and MUTE Windows System sounds. Sent from my iPhone ...nr4c. bill On Sep 5, 2017, at 12:32 PM, Neil Zampella wrote: If you're using

Re: [Elecraft] FT8 output power KX2/KX3

FWIW ... with one of the KX3 aftermarket heat sinks, and after I performed the VFO Temperature Compensation routine, I was regularly doing 10W on the rig with JT65 with its 42 sec Tx cycle.   The heatsink did get warm enough that it worried me, and I added a salvaged 12v fan from an old desktop

Re: [Elecraft] Who would spend 30 hours+ building an Elecraft K2? (plus: special pricing)

Wayne, I've been trying to convince SWMBO that I need something to keep me busy now that I'm semi-retired, I almost have her convinced that my building a K2 would do it, but I noticed that the pricing lasts until Jan 31st.   Are you thinking about a Valentine's Day sale too

Re: [Elecraft] Who would spend 30 hours+ building an Elecraft K2? (plus: special pricing)

long after it arrives :) 73s, Neil Zampella, KN3ILZ On 1/28/2018 2:44 PM, Wayne Burdick wrote: Special K2 pricing is good until at least the end of February. We’ll fix this on the website early next week. tnx Wayne N6KR On Jan 27, 2018, at 6:19 PM, Neil Zampella wrote: Wayne, I

Re: [Elecraft] How many K2's sold

I'm working on K2 s/n 7788 right now.  Just started putting capacitors on the Control Board, taking my time :) Neil Z, KN3ILZ On 1/30/2018 2:46 PM, Robert G Strickland wrote: As the subject says, how many K2's have been sold to date? ...robert __

Re: [Elecraft] Old Posts

PM Mail .. that brought back memories.  My OS/2 box was my main computer until it got to the point where I had no choice to move to Win7, because Win7 was as stable as OS/2 - eComStation.   However, by that time I had moved from PM Mail (which was no longer being supported) to Thunderbird, have

Re: [Elecraft] KX3 and WSJT-X Setup

I've had WSJT-X working with my KX3 for over two years now. I realize that you already have the Signallink, but try going directly to the PC instead and see if that fixes anything. All you need is: 1.   KXUSB cable for CAT control 2.   Two stereo audio cables for audio in and out.  I bought the

Re: [Elecraft] FT 8

Well I'll comment on it. 1.  its from 2009 ... and refers to the old WSJT v6 2.  Its obvious he has not looked at the code for the JT65 decoder Now the system can use the saved data from previous QSOs, but there are so many new users that the only thing its good for is to show whether or not y

Re: [Elecraft] Planning the next filters

To add something to what Don said: I've been using my KX3 with a USB soundcard (SoundBlaster SBx) for digital modes, and WSJT-X modes especially for about two years now. Before that I was using an IC-718 with the same soundcard. You don't need to spend over $100 for a specialty piece of equipm

Re: [Elecraft] Another really good reason to come to the Visailia DX convention this weekend...

OK ... I only have a KX3/KXPA100/PX3 setup, but I'm excited to see something like this .. and its 19 days after April 1st too !! What I want to know is: Will you LIVE STREAM (of any sort) the reveal, or will you keep the rest of us in the hinterland unable to attend in suspense because you can

Re: [Elecraft] Trying to get on FT-8 with my KX2

Tom, Why are you using a Signalink ???Its not needed for WSJT-X, and I'm not sure that its needed for any other digital mode. You can connect the KX to your computer using the steps below. 1. Find yourself a good USB external soundcard that provides a 48,000 Hz DVD quality INPUT and OU

Re: [Elecraft] Trying to get on FT-8 with my KX2

25 AM, Tommy wrote: Thanks for the info. I'm using a Signalink because I have one and bought the appropriate cable for it. My issue is with the com port apparently. WSJT-X won't let me select one, it just says "USB" with no other choices. Tom On 07/21/2017 09:14 AM, Neil Zamp

Re: [Elecraft] Trying to get on FT-8 with my KX2

Actually, the rig control when using the KXUSB cable provides frequency changes, as well as PTT and split control. As far as the 'blank frequency list' .. all you need to do is RIGHT CLICK in the frequency, and select RESET from the menu, the program will then populate the list. When using

Re: [Elecraft] Trying to get on FT-8 with my KX2

Tom, You do not 'set up' auto sequencing and standard messages, the program does that. All you need to do is enter your Callsign and GRID in the settings for the program. You also need to make sure that you have a good time sync program as time is critical with JT65/JT9 and MOST critical

Re: [Elecraft] Trying to get on FT-8 with my KX2

OK ... see below On 7/22/2017 2:02 PM, Tim Boppre wrote: Sorry, yes, I shouldn't have added in the SignaLink comment in my reply as that's not the problem. In the PTT Method portion of the Radio dialog box is the PTT Method set to "CAT" instead of "VOX"? Good .. To clarify, the Port drop

Re: [Elecraft] Trying to get on FT-8 with my KX2

tostraight through cable (red band). This is what I use. Thanks for clarification Bjorn, SA0BXI On 2017-07-21 15:14, Neil Zampella wrote: Tom, Why are you using a Signalink ???Its not needed for WSJT-X, and I'm not sure that its needed for any other digital mode. You can connec

Re: [Elecraft] K3S Package Discounts

We used to call it a 'Short between the headsets!' :) Neil, KN3ILZ On 7/29/2017 11:07 AM, Kevin Stover, AC0H wrote: Exactly!! I'll bet it's more like 95% PEBCAR (Problem Exists Between Chair and Radio), Along with the "We Don't Need No Stinking Manuals" attitude exhibited by some "real" r

Re: [Elecraft] line IN and OUT on new computer

FWIW ... I do a lot of JT65/JT9/FT8 digital, and I would definitely suggest getting an external USB soundcard for such work. 1. It eliminates the probably of transmitting any OS sounds/beeps/alarms along with your digital audio. 2. Provides good isolation capabilities 3. While I'm assuming

Re: [Elecraft] Software for KX3

As was mentioned, the software you want to use depends on what your plans are. I've used Ham Radio Deluxe, and the DX Suite's Commander with the KX3 with no problems. I've also used some of the digital mode software that interfaces with both, WSJT-X for instance, and it works flawlessly. Wh

Re: [Elecraft] Elecraft Digest, Vol 129, Issue 36

Ask, and you shall receive ... well ... most times you'll receive. I love this company ... :) Neil, KB3TVU On 01/27/15 06:31 pm, elecraft-requ...@mailman.qth.net wrote: Subject: Re: [Elecraft] Panadapter From: Wayne Burdick Date: 01/27/15 01:46 pm To: Phil Hystad CC: "elecraft@mailman.qth.n

Re: [Elecraft] Elecraft Digest, Vol 130, Issue 4

I believe the DX Suite's DXView program does that now. On 02/04/15 05:40 pm, elecraft-requ...@mailman.qth.net wrote: ubject: Re: [Elecraft] Google Earth Pro Now Free From: David Ahrendts Date: 02/04/15 01:23 pm To: Nick Kemp CC: elecraft@mailman.qth.net Now to get it to auto-locate to the e

Re: [Elecraft] New Product to help many K3/KX3 users

But ... it isn't April 1st yet !!! On 03/16/15 08:24 pm, James kvochick wrote: https://factualradio.wordpress.com/2015/03/16/geen-idee-engineering-companion-radio-assistant-peripheral/

Re: [Elecraft] KX3 and Digital Modea

Has the Temperature Compensation been done on that KX3 ?? http://www.elecraft.com/manual/KX3%20Custom%20VFO%20TC%20rev%20A9.pdf I routinely run m KX3 at 5 watts using WSPR & WSJT-X for JT65/JT9 modes.The Temperature Compensation has been done, along with the replacement of the standard hea

[Elecraft] Using a KX3 with WSJT-X & DXLAB Commander

Hi all, Is anyone else using the same type of combination of software with the KX3? I'm using the KXUSB cable to control CAT, and an external USB soundcard directly hooked to the KX3. My issue is that I'm seeing some times when the KX3 does switch out of transmit at the end of the JT9 perio

  1   2   >