actually objected to the present method?
Cheers, Gene Heskett, CET.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 1940)
If we desire respect for the law, we must first make the law r
else looked at this bug report? What do you think?
https://github.com/LinuxCNC/linuxcnc/issues/2956
Currently we can click on a history line, re-use it or edit it before
clicking on go or hitting enter. We are used to it. Please do not change
it if the change disables our ability
s, 90 volt nema 17 or nema 23-34 are LC42 or LC57,
both of those can use psu's to 90 volts or more.
On Fri, Apr 5, 2024, 12:44 PM gene heskett wrote:
On 4/5/24 08:25, Curtis Dutton wrote:
yessir thank you. I studied it a fair bit a few years ago. It's part of
the
inspiration for this for
/lists/listinfo/emc-developers
___
Emc-developers mailing list
Emc-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-developers
Cheers, Gene Heskett, CET.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please
__
Emc-developers mailing list
Emc-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-developers
.
Cheers, Gene Heskett, CET.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order
that the 2
linear bearings I chose out of the 4 I ordered, were not made on the
same machine, I chose to use every third bolthole, which on 1 was about
59.98 mm while the other was 60.000 mm. I don't have accurate enough
gauges to say which was correct. Or if either.
Cheers, Gene Heskett, CET
On 3/13/24 15:19, gene heskett wrote:
On 3/12/24 16:35, gene heskett wrote:
On 3/12/24 13:49, gene heskett wrote:
On 3/11/24 12:31, andy pugh wrote:
On Mon, 11 Mar 2024 at 00:11, gene heskett
wrote:
Since no one has commented I updated to todays build, no help there.
lcnc refuses to move
On 3/12/24 16:35, gene heskett wrote:
On 3/12/24 13:49, gene heskett wrote:
On 3/11/24 12:31, andy pugh wrote:
On Mon, 11 Mar 2024 at 00:11, gene heskett wrote:
Since no one has commented I updated to todays build, no help there.
lcnc refuses to move the machine by my code more than once
On 3/12/24 13:49, gene heskett wrote:
On 3/11/24 12:31, andy pugh wrote:
On Mon, 11 Mar 2024 at 00:11, gene heskett wrote:
Since no one has commented I updated to todays build, no help there.
lcnc refuses to move the machine by my code more than once per startup.
It sounds like the code
On 3/11/24 12:31, andy pugh wrote:
On Mon, 11 Mar 2024 at 00:11, gene heskett wrote:
Since no one has commented I updated to todays build, no help there.
lcnc refuses to move the machine by my code more than once per startup.
It sounds like the code leaves a parameter in a state that causes
On 3/9/24 20:38, gene heskett wrote:
This gcode, when I can get it to run, finda all 8 holes just fine. And
now it will not run twice, refusing to go past the first move command on
the 2nd try after a full restart, and rehome.. With no reported errors
on the first run..
This is the current
have before
saving it, I won't touch till someone tells me to.
Thanks all. Take care & stay well.
Cheers, Gene Heskett, CET.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 1940)
If we
f F2 has
not then toggled on.
Many thanks for any advice Jon. Take care & stay well.
Cheers, Gene Heskett, CET.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 1940)
If we desire respec
.
Nicklas Karlsson
Take care & stay well Nicklas.
Cheers, Gene Heskett, CET.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 1940)
If we desire respect for the law, we must first make the l
On 3/8/24 12:46, Nicklas SB Karlsson wrote:
tor 2024-03-07 klockan 21:26 -0500 skrev gene heskett:
Greetings all;
one of the problems I am having when using a reasonable speed to search
for the edge of a hole is that it does not stop fast enough on first
contact, and leaves the probe touching
On 3/8/24 10:47, andy pugh wrote:
On Fri, 8 Mar 2024 at 02:29, gene heskett wrote:
is there a way to make it ignore such a false trigger
during the first few milliseconds of the back to center move?
My probing routines do a fast probe onto the edge (G38.2) and then a
slower move out
On 3/7/24 21:28, gene heskett wrote:
Greetings all;
one of the problems I am having when using a reasonable speed to search
for the edge of a hole is that it does not stop fast enough on first
contact, and leaves the probe touching the side of the hole as it spins
often enough I get a probe
all.
Cheers, Gene Heskett, CET.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 1940)
If we desire respect for the law, we must first make the law respectable.
- Louis D
tps://lists.sourceforge.net/lists/listinfo/emc-developers
Cheers, Gene Heskett, CET.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 1940)
If we desire respect for th
On 3/7/24 12:55, John Allwine wrote:
Lines 188-190 are missing calls.
But they at this time, never execute as #<_measure> is 1, might as well
be an M2 above them.
On Thu, Mar 7, 2024 at 10:21 AM gene heskett wrote:
On 3/7/24 12:12, andy pugh wrote:
On Thu, 7 Mar 2024 at 16:44
On 3/7/24 12:12, andy pugh wrote:
On Thu, 7 Mar 2024 at 16:44, gene heskett wrote:
o
It needs to be
o CALL
What line Andy, call is there in line 160 of the main do/while loop,
you've got week old code i think as I've posted two versions.
That was from the version you posted 1 hour ago
versions.
Cheers, Gene Heskett, CET.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 1940)
If we desire respect for the law, we must first make the law respectable.
- Louis D
On 3/7/24 09:38, gene heskett wrote:
See below> On 3/7/24 05:03, andy pugh wrote:
On Thu, 7 Mar 2024 at 00:30, gene heskett wrote:
If there is
any error that stops it, such as a probe trip when not in a probe move,
its all done until shut down, restarted and rehomed.
It really should
On 3/7/24 05:03, andy pugh wrote:
On Thu, 7 Mar 2024 at 00:30, gene heskett wrote:
If there is
any error that stops it, such as a probe trip when not in a probe move,
its all done until shut down, restarted and rehomed.
It really shouldn't need a shutdown and restart.
It did Andy
On 3/6/24 15:49, gene heskett wrote:
specifically the command to set spindle speed MUST BE LOWERCASE
Nothing in a gcode file causing machine motion beyond
S1000 will execute. No error messages of any kind either. Found it by
surround the first move with (debug, msg) statements.
I have
fixes it.
I changed the file back to a lowercase s:
s1000
and everything then seems to run normally.
So the old canary will live. ;o)> But he is certainly surprised.
Cheers, Gene Heskett, CET.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Pl
rse(filename)
File "/usr/bin/halcompile", line 441, in parse
a, b = f.split("\n;;\n", 1)
ValueError: not enough values to unpack (expected 2, got 1)
It is older code from 2017, by Kurt Jacobsen
Can anyone advise?
Cheers, Gene Heskett, CET.
--
"There are four boxe
the z for finding the xy. Electrical contact, spindle running so
the probe is dead circular. I have even done it with a tool spinning
backwards, does not mark a pcb.
Thank you, John. Take care & Stay well.
On Mar 3, 2024, at 4:56 PM, gene heskett wrote:
On 3/3/24 17:33, John Allwine w
Does the local/global status of the var make a diff? I note you used
a local in your example above.
Thanks a bunch.
[...]
Cheers, Gene Heskett, CET.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt
1) returns .
(debug , #[200+1]) returns "#[200+1]" but not the value stored there.
So how do I read back what I wrote?
Or is it busted?
Cheers, Gene Heskett, CET.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in tha
On 3/2/24 10:28, Andy Pugh wrote:
On 2 Mar 2024, at 12:35, gene heskett wrote:
I renamed tholefinder.ngc to tholefinder,
Leave the filename the same.
Rename the subroutine inside that file.
Call it by the subroutine name.
I did that, it worked but now complains about a syntax error
On 3/2/24 04:59, andy pugh wrote:
On Fri, 1 Mar 2024 at 23:38, gene heskett wrote:
Well, I seem to be up to the first named subroutine call. But it cannot
find it.
Drop the ".ngc" from the subroutine name in the .ngc fle.
You have
o sub
Didn't help, Andy.
I renamed thole
On 3/1/24 07:22, andy pugh wrote:
On Fri, 1 Mar 2024 at 08:04, gene heskett wrote:
One last Q in this thread, assuming the machine has been homed and I
want to G38.2 z-70. where contact is expected at about -67mm. But I
occasionally get a stop before contact. Noise? Will #5070 tell me
On 2/29/24 18:50, gene heskett wrote:
On 2/29/24 15:56, andy pugh wrote:
On Thu, 29 Feb 2024 at 18:14, gene heskett wrote:
Is it possible to concatenate several string vars into a variable name
in order to access an array of vars
No.
But you can do this with numbered variables.
So #[100
On 2/29/24 15:56, andy pugh wrote:
On Thu, 29 Feb 2024 at 18:14, gene heskett wrote:
Is it possible to concatenate several string vars into a variable name
in order to access an array of vars
No.
But you can do this with numbered variables.
So #[100 + #3] is a valid construction
is
pretty good.
What is your experience in similar situations?
Cheers, Gene Heskett, CET.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 1940)
If we desire respect for the law, we must first ma
s scanning thru the docs pdf w/o finding any
string manipulation stuff. It would be handier than sliced bread or
bottled beer for this. And would shrink my final code to 15% of
unrolling the whole maryann bolthole by bolthole.
Thanks all.
Cheers, Gene Heskett, CET.
--
"There are four b
On 2/29/24 04:05, andy pugh wrote:
On Wed, 28 Feb 2024 at 17:14, gene heskett wrote:
The Halshow "Watch" tab can be better for this.
Sounds useful. is it covered by a manpage?
https://linuxcnc.org/docs/stable/html/hal/tools.html#_halshow
Bookmarked, thanks Andy.
Cheers, Ge
On 2/29/24 04:03, andy pugh wrote:
On Wed, 28 Feb 2024 at 21:29, gene heskett wrote:
and I've copies of it in nc_files and in nc_files/subs, error msg claims
EOF while searching for it.
That isn't the most helpful message, it means that it hasn't found the
subroutine in the current G-code
On 2/28/24 16:27, gene heskett wrote:
On 2/28/24 12:15, gene heskett wrote:
On 2/28/24 08:02, andy pugh wrote:
On Wed, 28 Feb 2024 at 11:59, gene heskett wrote:
I often have as many as 8 open while developing code so I can see whats
going on in real time and now I can't see things w/o
On 2/28/24 12:15, gene heskett wrote:
On 2/28/24 08:02, andy pugh wrote:
On Wed, 28 Feb 2024 at 11:59, gene heskett wrote:
I often have as many as 8 open while developing code so I can see whats
going on in real time and now I can't see things w/o clicking on them,
The Halshow "Watch
On 2/28/2024 5:59 AM, gene heskett wrote:
On 2/28/24 06:27, John Thornton wrote:
That's probably the OS theme doing that. I ran into that with Debian
a few years ago the theme updated then windows not in focus became
very dim. It was so annoying I searched for a new theme that didn't
do
On 2/28/24 08:02, andy pugh wrote:
On Wed, 28 Feb 2024 at 11:59, gene heskett wrote:
I often have as many as 8 open while developing code so I can see whats
going on in real time and now I can't see things w/o clicking on them,
The Halshow "Watch" tab can be better for this. You
this?
Thanks John. Stay well.
JT
On 2/27/24 19:12, gene heskett wrote:
Hey guys; Genuine show stopper here at the Heskett den;
Running an axis gui. linuxcnc master updated yesterday. Camera gone
again. Has been gone for months. Minor, this project won't use it
anyway. I've almost given up on ever
On 2/28/24 05:03, andy pugh wrote:
On Wed, 28 Feb 2024 at 01:14, gene heskett wrote:
Some one since the last time I wrote some gcode on my g0704, has hooked
the hal meter up to focus status
I am not aware of any changes made to Halmeter recently.
Chris has made some stylesheet changes
cused, its way too dim. halmeter
and halscope if its affected, so they s/b be removed from focus and made
to behave as if they are focused full time. I am DIW until i can see
this stuff.
Is there anything I can do in hal to fix this?
Thanks all.
Cheers, Gene Heskett, CET.
--
"There are
m here in the
house. Sixty40 is a much more complex machine, still runs a several day
old buster update.
Is this fixable or is it finally time to install bookworm?, which has
NOT been a resounding success on this main machine.
Plz advise as I have a job for the go704 pending. Favor for a frie
list
Emc-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-developers
___
Emc-developers mailing list
Emc-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-developers
Cheers, Gene Heskett.
--
"T
ceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-developers
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 1940)
If we desire respect for the law, we must first mak
20 years I've only reported
3 gotcha's. That, compared to what Redmond does, is legendary and
every one of you should be proud it. Take care, all of you, stay warm
and well.
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, a
it.
Its really too late to offer solutions now, get behind the current build
process and work with it.
Rod Webster
*1300 896 832*
+61 435 765 611
Vehicle Modifications Network
www.vehiclemods.net.au
On Fri, 29 Dec 2023 at 03:04, gene heskett wrote:
On 12/28/23 09:05, Andy Pugh wrote
On 12/28/23 09:05, Andy Pugh wrote:
On 28 Dec 2023, at 12:55, gene heskett wrote:
Any chance of updating the buildbots page yellow table?
I can’t. I have no access to the buildbot.
Anyway, the buildbot doesn’t build anything for arm64.
Is that a lack of hardware? I have offered some
On 12/28/23 06:46, andy pugh wrote:
On Thu, 28 Dec 2023 at 03:24, gene heskett wrote:
All packages are up to date.
W: Skipping acquire of configured file '2.9-rt/source/Sources' as
repository 'https://www.linuxcnc.org bookworm InRelease' does not seem
to provide it (sources.list entry
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 1940)
If we desire respect for the law, we must first make the law respectable.
- Louis D
On 12/27/23 23:44, gene heskett wrote:
On 12/27/23 22:33, Rob M wrote:
Gene are you after a PC image or a Pi image ?
rpi4 here.
Or have you made a type with the amd64 bit ?
No, arm64.
I must admit with the "role your image utility" rod uses the locale
things
is a bit messy &am
rst, a possibility
since my next b-day will be the 90th. Got hardware keeping me alive now,
pacemaker and a TAVR valve in my heart. 5 or 6 years left on each ;o)>
On Thu, Dec 28, 2023 at 1:53 PM gene heskett wrote:
On 12/27/23 20:18, andy pugh wrote:
On Thu, 28 Dec 2023 at 01:15, andy pu
765 611
Vehicle Modifications Network
www.vehiclemods.net.au
On Thu, 28 Dec 2023 at 12:35, gene heskett wrote:
On 12/27/23 16:50, Rod Webster wrote:
You could try this image that contains preempt_rt for the Pi 5 (Linuxcnc
2.9.1)
https://drive.google.com/file/d/1H_q0Ra
://www.linuxcnc.org/iso/linuxcnc_2.9.1-amd64.hybrid.iso
could not read control file from URL
https://www.linuxcnc.org/iso/linuxcnc_2.9.1-amd64.hybrid.iso
What do I do next?
Thanks all
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and
e.net
https://lists.sourceforge.net/lists/listinfo/emc-developers
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 1940)
If we desire respect for the l
On 10/22/23 09:28, Rene Hopf via Emc-developers wrote:
On 16.10.23 00:00, gene heskett wrote:
On 10/14/23 10:17, gene heskett wrote:
On 10/14/23 09:13, Sam Sokolik wrote:
I have actually seen this playing with axis from master on
bookworm. At
some point the refresh button in axis just
On 10/19/23 09:48, andy pugh wrote:
On Wed, 18 Oct 2023 at 11:49, gene heskett wrote:
no place
to spec it as an RN tool.
What's an RN tool?
Radius Nose? I am fairly sure that the Axis Preview knows nothing
about that. (and as it only plits the tool tip centre, it is probably
only
I mean. And why is there
not a shape box to indicate an RN tool. That seems pretty basic to me.
Far more trouble to dup the diameter and shape of the tools cut. But
someday, maybe.
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Plea
On 10/14/23 10:17, gene heskett wrote:
On 10/14/23 09:13, Sam Sokolik wrote:
I have actually seen this playing with axis from master on bookworm. At
some point the refresh button in axis just quits working. You have to
physically re-open the gcode file for the changes to show up
opers mailing list
Emc-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-developers
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 1940)
If we desire resp
g
old code. geany launched from the menu->edit.
That really ought to set a flag to do the reload automatically when
geany exits.
I first thought geany was starting to do gedit's 54 pickup tricks but
several subsequent cats of the file were correct but lcnc was reloading
old code.
Che
On 10/14/23 05:29, andy pugh wrote:
On Sat, 14 Oct 2023 at 03:10, gene heskett wrote:
What I found may not actually be linuxcnc, but in linux itself. All the
indications are that its a stale cache problem. The only way to get the
edited code into linuxcnc is to use the pulldown to load
a cache flush and
reread of the dir when the reload icon is clicked on? Lose the inode
info by reloading the file by name maybe? That sould fix whats turned
into a major aggravation, reloading old code.
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
nds to around the 75 area.
Much of that diff I suspect is due to the wider stack frame, but I've no
actual timing evidence to back that up. Perhaps Rod could comment?
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Pleas
Emc-developers mailing list
Emc-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-developers
___
Emc-developers mailing list
Emc-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listin
On 10/1/23 13:13, andy pugh wrote:
On Sun, 1 Oct 2023 at 18:09, gene heskett wrote:
No, this is master. It, shall we say, caught me by surprise, but now tat
i see how it works, I'll get used to it.
The reload button ought to work, so raise an issue about it:
https://github.com/LinuxCNC
On 10/1/23 12:46, andy pugh wrote:
On Sun, 1 Oct 2023 at 15:02, gene heskett wrote:
2 possible heads ups.
Something I ran into yesterday on my go704 mill, writing gcode to carve
a hard maple stick round preparatory to threading it for a vise screw,
the axis interfaces "reload" butt
ists.sourceforge.net/lists/listinfo/emc-developers
___
Emc-developers mailing list
Emc-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-developers
.
Cheers, Gene Heskett.
--
"There are four boxes to be used in defens
dresses
on the device.
I think I've covered everything
Rod Webster
*1300 896 832*
+61 435 765 611
Vehicle Modifications Network
www.vehiclemods.net.au <http://www.vehiclemods.net.au/>
On Thu, 28 Sept 2023 at 04:27, gene heskett <mailto:ghesk...@shentel.net>> wrote:
On 9/19/23 11:22, gene heskett wrote:
On 9/17/23 18:18, andy pugh wrote:
On Sun, 17 Sept 2023 at 22:24, gene heskett wrote:
Try libgpiod2 for Buster.
The gpiod team have done some rather odd things with their versioning.
https://packages.debian.org/buster/libs/libgpiod2
Same error
On 9/17/23 18:18, andy pugh wrote:
On Sun, 17 Sept 2023 at 22:24, gene heskett wrote:
Try libgpiod2 for Buster.
The gpiod team have done some rather odd things with their versioning.
https://packages.debian.org/buster/libs/libgpiod2
Same error, not available.
It's right there! If Apt
are not listed in the deb files on both images
Rod Webster
*1300 896 832*
+61 435 765 611
Vehicle Modifications Network
www.vehiclemods.net.au
Take care & stay well.
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. P
developers
___
Emc-developers mailing list
Emc-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-developers
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and a
1300 896 832*
+61 435 765 611
Vehicle Modifications Network
www.vehiclemods.net.au
On Mon, 18 Sept 2023 at 08:18, andy pugh wrote:
On Sun, 17 Sept 2023 at 22:24, gene heskett wrote:
Try libgpiod2 for Buster.
The gpiod team have done some rather odd things with their versioning.
h
On 9/17/23 18:18, andy pugh wrote:
On Sun, 17 Sept 2023 at 22:24, gene heskett wrote:
Try libgpiod2 for Buster.
The gpiod team have done some rather odd things with their versioning.
https://packages.debian.org/buster/libs/libgpiod2
Same error, not available.
It's right there! If Apt
On 9/17/23 12:34, andy pugh wrote:
On Sun, 17 Sept 2023 at 11:50, gene heskett wrote:
sudo apt install libgpiod-dev xvfb
But they don't seem to be available for raspios10. Buster
Try libgpiod2 for Buster.
The gpiod team have done some rather odd things with their versioning.
https
.deb files that are not
existing because the build never started because of those missing build deps.
That is a(n easily fixable) problem of the script.
Best,
Steffen
(traveling, not sending patches :-) )
. This are
Gesendet: Sonntag, 17. September 2023 um 11:28 Uhr
Von: "gene heskett"
Gesendet: Sonntag, 17. September 2023 um 11:28 Uhr
Von: "gene heskett"
An: "EMC Developers"
Betreff: [Emc-developers] wiped out lcnc on my pi
Trying to update my rpi4 running buster, but --fix-broken removed the
executables.
So I try to run my buildit script which build
/conflicts unsatisfied;
aborting
dpkg-buildpackage: warning: (Use -d flag to override.)
mv: cannot stat '*.deb': No such file or directory
real0m4.396s
user0m3.275s
sys 0m0.866s
What should I do next?
Thank you.
Cheers, Gene Heskett.
--
"There are four boxes to be used in de
On 9/6/23 16:12, Nathan Hartman wrote:
On Wed, Sep 6, 2023 at 2:06 PM gene heskett wrote:
Traceback (most recent call last):
File "/usr/bin/hal_manualtoolchange", line 65, in
app = tkinter.Tk(className="AxisToolChanger")
File "/usr/lib/python3.7/tkinte
it last night, and tlm is down
for power control mods, so I am totally out of business. Battery has
two shorted cells, expected, its 7 years old. Battery ordered.
What do I do now, folks?
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jur
in function2 found in /files/userscripts/uscripts
I've been running master since forever, thanks for the heads up, tagged.
Rod Webster
*1300 896 832*
+61 435 765 611
Vehicle Modifications Network
www.vehiclemods.net.au
On Sun, 3 Sept 2023 at 15:11, gene heskett wrote:
On 9/2/23 23:43, Rod Webster
lopers
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 1940)
If we desire respect for the law, we must first make the law respectable.
- Louis D. Brandeis
Gene
ed mailbox in town
when I get done. Small town. :o)>
Rod Webster
*1300 896 832*
+61 435 765 611
Vehicle Modifications Network
www.vehiclemods.net.au
On Sat, 19 Aug 2023 at 01:48, gene heskett wrote:
On 8/18/23 10:09, gene heskett wrote:
Several problems? this morning.
1. Used synaptic
On 8/18/23 10:09, gene heskett wrote:
Several problems? this morning.
1. Used synaptic to fix broken-packages by removing my locally built
linuxcnc-v2.10.0 pacakages.
1a. debians arm64 netinstall, put on an sd card doesn't even try to
boot. Apparently no u-boot or miss-configured
On 8/16/23 19:15, gene heskett wrote:
On 8/16/23 09:50, Alan Condit via Emc-developers wrote:
Gene,
I was able to build linuxcnc on the Pine RockPro64 which is a 3399 chip.
But you've not reported if rpspi.ko built (and worked would be super
nice), and my 7i90HD hardware requires
bailed out. I reported that 2 or 3 times here, long ago
when bullseye was new, and was ignored.
So I'm stuck all alone out here in left field and everyone has gone home
for the rest of the month/year/whatever.
Please advise.
Cheers, Gene Heskett.
--
"There are four boxes to be used in de
On 8/16/23 09:50, Alan Condit via Emc-developers wrote:
Gene,
I was able to build linuxcnc on the Pine RockPro64 which is a 3399 chip.
Alan
Date: Tue, 15 Aug 2023 09:22:52 -0400
From: gene heskett
To: emc-developers@lists.sourceforge.net
Subject: Re: [Emc-developers] Downloading of DOCS
On 8/15/23 12:47, gene heskett wrote:
On 8/15/23 09:32, gene heskett wrote:
On 8/15/23 07:23, andy pugh wrote:
On Mon, 14 Aug 2023 at 20:57, gene heskett wrote:
because there is no longer an in-release file
for buster,
http://buildbot.linuxcnc.org/dists/buster/
. I can't even restore
On 8/15/23 09:32, gene heskett wrote:
On 8/15/23 07:23, andy pugh wrote:
On Mon, 14 Aug 2023 at 20:57, gene heskett wrote:
because there is no longer an in-release file
for buster,
http://buildbot.linuxcnc.org/dists/buster/
. I can't even restore from the buildbot
because apt won't
On 8/15/23 07:23, andy pugh wrote:
On Mon, 14 Aug 2023 at 20:57, gene heskett wrote:
because there is no longer an in-release file
for buster,
http://buildbot.linuxcnc.org/dists/buster/
. I can't even restore from the buildbot
because apt won't access the site w/o that file.
You could
On 8/15/23 07:23, andy pugh wrote:
On Mon, 14 Aug 2023 at 20:57, gene heskett wrote:
because there is no longer an in-release file
for buster,
http://buildbot.linuxcnc.org/dists/buster/
. I can't even restore from the buildbot
because apt won't access the site w/o that file.
You could
On 8/14/23 11:20, andy pugh wrote:
On Sun, 13 Aug 2023 at 14:07, gene heskett wrote:
Because I have no interest in languages I don't speak and there is no
way to build just the English docs. I am locked out of any upgrades as
I'm running buster,
Can you explain what you mean by this?
Just
www.vehiclemods.net.au
On Sun, 13 Aug 2023 at 23:05, gene heskett wrote:
On 8/13/23 05:17, Steffen Mller wrote:
Hello,
Gesendet: Freitag, 11. August 2023 um 09:38 Uhr
Von: "Marius"
There seem to be a problem with the DOCS on the server. Upgrading is not
possible if the docs ar
are & stay well, Steffan.
___
Emc-developers mailing list
Emc-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-developers
.
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
On 8/10/23 20:20, gene heskett wrote:
ping
On 8/10/23 13:33, gene heskett wrote:
On 8/10/23 12:09, Sebastian Kuzminsky wrote:
On 8/10/23 09:38, Marius wrote:
Just so I understand please. Did the RPi 4 code crash or are you
using a RPi 4 to do some of the compilation?
The Pi is one
1 - 100 of 1996 matches
Mail list logo
