On Dec 2, 2008, at 9:26 PM, Stephen Wille Padnos wrote:
> Dave Engvall wrote:
>
>> Hi all,
>>
>> IIUC there is no way to dynamically replace a whole tool table.
>> IOW I must shut down emc, edit the .ini to point to the new tool
>> table and then start emc ag
We'll give a try.
Tnx
Dave
On Dec 2, 2008, at 9:59 PM, Jon Elson wrote:
> Dave Engvall wrote:
>> Hi all,
>>
>> IIUC there is no way to dynamically replace a whole tool table.
>> IOW I must shut down emc, edit the .ini to point to the new tool
>> table and t
Hi all,
IIUC there is no way to dynamically replace a whole tool table.
IOW I must shut down emc, edit the .ini to point to the new tool
table and then start emc again.
Dave
-
This SF.Net email is sponsored by the Moblin Y
On Dec 2, 2008, at 7:51 PM, [EMAIL PROTECTED] wrote:
> What do you guys use as the quickest and best cost effective and
> time-effective way to finish flat surfaces before the parts are
> Anodized?
> The parts are 8"x6"x3" Al boxes made from square tube with a few slots
> and holes CNC'd in so
On Nov 30, 2008, at 8:27 PM, tomp wrote:
> Kirk
>
> Kirk Wallace wrote:
>> On Sun, 2008-11-30 at 20:20 -0700, [EMAIL PROTECTED] wrote:
>>
>>> Hi
>>> I reduced Default_valacity =1.
>>> Max_velacity =2.0
>>> Default_acceleration = 2.0
>>> Max_acceleration =3.0
>>>
>>> The picture is:
>>> www.conce
Good Show
Dave
On Nov 30, 2008, at 7:03 PM, Jon Elson wrote:
> Please excuse a short commercial plug
>
> Dave Engvall gave me a Panasonic brushless motor at the CNC
> Workshop to
> see if I could figure out how to run it.
> It took me a LONG time to get around to fi
On Nov 24, 2008, at 3:26 AM, Jack Coats wrote:
> I checked out the various ITX cards, and they all have one flaw, video
> on board, and sometimes
> no parallel port, or way to put a 'bus' on them. Video, ethernet,
> parallel or other interface
> on-board makes for a non-optimum selection IMHO.
On Nov 5, 2008, at 4:25 PM, Jim Fleig - CNC Services wrote:
> And I've got MSC catalogs, but Hennley
>> beats their prices everytime.
>
> I tried Googling Hennley and Henley but still did not find a source of
> cutters.
>
> Jim
Try hemly tool
www.hemlytool.com
>
>
>
> - Original Message --
On Nov 4, 2008, at 10:16 PM, Andrew Ayre wrote:
> I don't mean to take this OT, but I must note the term "sales
> engineer".
> It's depressing to see people use the title engineer when they likely
> don't design and create systems or infrastructure, or operate a train.
> Perhaps someday the tit
On Nov 5, 2008, at 1:04 AM, Gene Heskett wrote:
> On Wednesday 05 November 2008, Kent A. Reed wrote:
>> Gentle persons:
>>
>> Holy cow! I count eighteen mail digests between my message of just
>> two
>> days ago and now. We're really cooking with gas here.
>>
>> I meant no disrespect to Weber S
On Nov 4, 2008, at 8:10 AM, Mark Wendt (Contractor) wrote:
> At 11:03 AM 11/4/2008, you wrote:
>
>> Just to sound like a broken record
>>
>> Synergy runs on Linux. You get 2.5 D and wireframe for free. It is
>> the CAM
>> part that cost $$.
>>
>> Just hit the Weber Systems site and download.
On Nov 4, 2008, at 4:49 AM, Mark Wendt (Contractor) wrote:
> At 07:36 AM 11/4/2008, Jack Coats wrote:
>> I am guessing that Autocad probably has an internal version that does
>> run well on 'nix.
>>
>> A couple of years before Oracle allowed anyone to run it on Linux,
>> I ran
>> into a develop
On Nov 3, 2008, at 7:05 AM, Sebastian Kuzminsky wrote:
> Mark Wendt (Contractor) wrote:
>> And though it's not a unixy question type list, for those unix noobs
>> that want or need to find a file that's located somewhere in the
>> system but you have no idea where, type "cd /", then "find . -name
On Oct 30, 2008, at 9:06 PM, John Kasunich wrote:
> Dave Engvall wrote:
>
> ay have to try something else. Will check for a menu.
>>
>> After the comments (JMK) this afternoon about problems with the Mazak
>> at Galesburg I
>> tried running a program on my
On Oct 30, 2008, at 7:51 PM, Jon Elson wrote:
> Dave Engvall wrote:
>>
>>
>> Hi,
>> Interesting idea to run for a long time. My numbers get bad enough
>> even in a short time.
>> I've installed the patched .ko for Ubuntu 6.06 smi and that improved
>
On Oct 30, 2008, at 8:41 AM, tomp wrote:
> Stephen Wille Padnos wrote:
>> Dave Houghton wrote:
>>
>>
>>> Hello everyone
>>>
>>> I didn't get far trying to set up EMC2
>>>
>>> I decided to do the Latency Test first, having read both sets of
>>> instructions. 'Configuration Wizard for Steeper Machi
On Oct 26, 2008, at 5:25 PM, Dave Houghton wrote:
> Hi Jon
> Thanks very much, Chris Morley sorted it out for me, the floppy is
> up and
> running.
> I have no idea what fdisk is or what it does, so unless some one
> told me to
> use it I wouldn't.
> I only use 3.5" because they are there, ma
On Oct 26, 2008, at 6:20 AM, Maximilian wrote:
>
> Hey Chris, Hey Dave,
>
>>> When you home, do you do the axes all at the same time, or one at a
>>> time? I know the STG (the card itself) has some limitations when
>>> searching for index on more than one axis at a time.
>
> The stg1 card can on
On Oct 25, 2008, at 9:24 PM, Jon Elson wrote:
>
>> On Sat, Oct 25, 2008 at 09:20:38AM -0700, Dave Engvall wrote:
>>
>>> I'm not at all certain that rehome works ( homing a second or more
>>> time after bring up emc). I ended up 0.1" off one time.
&
Ah! I kick them loose one after the other so all are in the homing
process at once.
Dave
On Oct 25, 2008, at 10:20 AM, Chris Radek wrote:
> On Sat, Oct 25, 2008 at 09:20:38AM -0700, Dave Engvall wrote:
>>
>> I'm not at all certain that rehome works ( homing a second or more
Hi,
again massive snip!
After some fiddling around as far as I can tell homing with limit
switch and index does work with a STG 1 card.
I can stick a .500 dowel in a .500 drill bushing every time.
I'm not at all certain that rehome works ( homing a second or more
time after bring up emc). I e
On Oct 23, 2008, at 1:11 PM, Chris Radek wrote:
> On Thu, Oct 23, 2008 at 09:58:02PM +0200, Alejandro wrote:
>> Hello everybody,
>>
>> I recently bought a card Motenc-lite and when it started EMC2 with
>> the configuration of motenc, I get an error card not detected.
>> Anybody can help me id
On Oct 23, 2008, at 9:48 AM, John Kasunich wrote:
> Kirk Wallace wrote:
>> On Thu, 2008-10-23 at 07:45 -0700, Dave Engvall wrote:
>> ... snip
>>> Thanks for the confirmation although that wasn't the news I wanted.
>>> I would like to be able to emulate th
On Oct 23, 2008, at 5:28 AM, Jeff Epler wrote:
> On Wed, Oct 22, 2008 at 08:10:26PM -0700, Dave Engvall wrote:
>> BTW - it appears that the hal stg driver doesn't have an index
>> output or am I again missing something.
>
> If you mean a HAL pin which allows you t
< snip everything and start over>
I was going to just pick on Ray but I think I will dump on the whole
list.
In summary: this started out as inconsistencies in the homing of X
(something like .03)
the lstg diagnostic/exerciser from stg gives interesting results.
X axis 2500 cpr encoder on b
On Oct 20, 2008, at 10:11 AM, Alex Joni wrote:
Hi Dave,
can you also tell me what the "loadrt hal_stg" line from your hal
file is?
There is a bug in the driver, and index might not work.
Regards,
Alex
- Original Message -----
From: "Dave Engvall" <[EMAIL PR
On Oct 20, 2008, at 10:11 AM, Alex Joni wrote:
> Hi Dave,
>
> can you also tell me what the "loadrt hal_stg" line from your hal
> file is?
> There is a bug in the driver, and index might not work.
>
> Regards,
> Alex
Yep!
loadrt hal_stg
Dave
>
> --
K there.
Dave
>
> - Original Message -
> From: "Dave Engvall" <[EMAIL PROTECTED]>
> To: "Enhanced Machine Controller (EMC)" [EMAIL PROTECTED]>
> Sent: Monday, October 20, 2008 6:04 PM
> Subject: Re: [Emc-users] Stg 1 homing
>
>
>>
On Oct 20, 2008, at 7:45 AM, John Kasunich wrote:
> Kenneth Lerman wrote:
>> Hi Dave,
>>
>> I'm sure someone will correct me if I'm wrong; so here goes.
>>
>> The way index homing works is that after the homing switch
>> actuation is
>> detected, the next index pulse sets the home position. If,
Hi all,
Finally found a 'roundtoit'.
As a quick test of homing repeatability I mounted a piece of 6061-
T6 in the vise, wrote a small program to
move from homing position to the workpiece and then drill a 1/2" hole
using a 0.500 carbide endmill.
Hole 1 was drilled repeatably after a shut d
Hi,
It is probably working correctly but I need to get out the dial
indicator and confirm.
To answer your question; it may home coming off the switch rather
than on index. Just an impression.
Maybe I'm just flaky. ;-) No comments from the peanut gallery ...
Dave
On Oct 19, 2008, at 3:14 AM,
I use an stg1 on the Mazak. I sometimes wonder if it homes
correctly; it appears to but I've not checked this rigorously. It is
on my todo list.
Just got back from an extended week hunting. No deer but did get a
bear after 55 years of going hunting. :-)
Should get to the homing check before
The fest machine retained the original servo motors but swapped out
the amps to Servo Dynamics 1525BR's. As far as AC drives I have no
experience but you might take a look at those from Servo Dynamics.
HTH
Dave
On Sep 23, 2008, at 1:40 PM, Ted Hyde wrote:
> Does anyone know if the CNC-fest
Well that should shake out as 200 mm/sec a pretty respectable
velocity. His .ini should tell the tale.
Dave
On Sep 22, 2008, at 4:59 PM, Kenneth Lerman wrote:
> John,
>
> He must be from a country where the thousands separator is '.' instead
> of ','. So speed is actually 12,000 mm/min.
>
> Ken
Nice demo Stuart. It just rubs in what most of us can't do, at least
with a single setup.
Programmed in APT right?
Dave
On Sep 20, 2008, at 12:35 PM, Stuart Stevenson wrote:
> Gentlemen,
>the test cut on the cinci is here -
> http://www.youtube.com/watch?v=35tHYaDUmZQ
>
> pay attention t
On Aug 11, 2008, at 6:37 PM, Gene Heskett wrote:
> On Monday 11 August 2008, Moses O McKnight wrote:
>> On Mon, 2008-08-11 at 11:06 -0400, Gene Heskett wrote:
>>> As for editors, there are several available. I'm partial to the
>>> vi/vim
>>> offerings myself.
>>
>> If you're going to recommend
Hi,
Please note the following reference to the emc wiki.
http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?Case_Studies
You will note that I used a servo_to_go card in my conversion. The
conversion of a similar Mazak at fest used a
Motenc-lite (see mazak conversion in the wiki).
If I we to do my conv
Hi Steve, Jon:
The Analog Devices chips have really good specs especially at low
freq. How they are rather pricey in todays world of inexpensive chips
with excellent performance. A couple of $14 to $31 chips drives the
price of the finished board up pretty fast.
There is a National tach ch
Hi Jon,
I'm in way over my head here but I see a couple of issues. One being
which method will track actual velocity best and the other is
performance of the tach around zero crossing.
It is an interesting problem. ;-)
Dave
On Jul 11, 2008, at 9:48 PM, Jon Elson wrote:
> I mentioned to some p
Chris,
Any chance that what Kirk is seeing is the same as the problem on the
Mazak and could be fixed in like manner?
Dave
On Wed, 2008-07-02 at 16:37 -0500, Chris Radek wrote:
> On Wed, Jul 02, 2008 at 02:12:17PM -0700, Kirk Wallace wrote:
> > I did my first rigid tap on my lathe. It worked we
Hi Greg,
Chances are that dumping the on-board video for a card will change
things.
I'm running an Intel 'Seattle' 600 MHz P3 with a video card and 384
Mb of memory and getting fine response.
HTH
Dave
On Jun 8, 2008, at 6:53 PM, Greg Michalski wrote:
> Just thought I'd share my benchtop mill
On Jun 7, 2008, at 11:30 AM, Jon Elson wrote:
> Andre' Blanchard wrote:
>
>> What is the delay (in degrees of rotation) between reading the
>> spindle
>> encoder and positioning the Z axis?
>> That delay would be in opposite directions going and coming out.
> Unless there is mechanical backlash
Hi,
Does anyone happen to remember where the front panel codewheel to jog
code resides?
TIA
Dave
-
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Sou
On Jun 7, 2008, at 7:23 AM, Chris Radek wrote:
> On Fri, Jun 06, 2008 at 03:57:49PM -0700, Dave Engvall wrote:
>> OK, more dumb questions. Would a short ball screw do what you want?
>> It certainly would be more precise than acme rod; or do I miss the
>> intent?
>
> I
t; Chris Radek wrote:
>> On Fri, Jun 06, 2008 at 03:13:01PM -0700, Dave Engvall wrote:
>>> I just checked the wiki and someone wanted some acme thread for
>>> fest.
>>> I happen to have some 1" if they can figure out a way to mount it.
>>> Any idea who
I just checked the wiki and someone wanted some acme thread for fest.
I happen to have some 1" if they can figure out a way to mount it.
Any idea who we blame for this?
Dave
-
Check out the new SourceForge.net Marketplace.
a pain. *nix is neat when
it works but sometimes .
dave
-g
On Sun, Jun 1, 2008 at 9:24 AM, dave engvall <[EMAIL PROTECTED]>
wrote:
Hi Gary,
I thought I set it up right but here is what I get. What did I miss?
Yes I do use vi or vim and as a friend of mine claims vi
Hi Gary,
I thought I set it up right but here is what I get. What did I miss?
Yes I do use vi or vim and as a friend of mine claims vi is vile;
however I can make quick changes in vi while gedit is still loading.
Dave
[EMAIL PROTECTED] .vim]$ vim /usr/weber/ST/barrel_rest.ngc
Error detected wh
Notice that he is stalling on rapids so his max velocity is too high:
but the procedure below should tell him where
to set it. :-)
Dave
On May 27, 2008, at 3:05 PM, Alex Joni wrote:
> Aaron,
>
> another way to try this:
> start with the old config (speed at 10 mm/second).
> Do a series of tests
OT - but look at the specs on this one.
http://www.physikinstrumente.com/en/products/prdetail.php?sortnr=700800
Also it the velocity range 0.001/min - 0.00025/min or really 0.001/m
- 0.0025/min?
Dave
On May 23, 2008, at 5:13 AM, [EMAIL PROTECTED] wrote:
> all grinders have linear incoder an
Aaron,
Other responders have indicated they needed more infomation.
If you can fill in the blanks and confirm or correct assumptions then
someone has a real chance of providing
concrete help. It won't be me as I'm a servo person. Sorry.
OK, lets gather some more information here:
Stated or i
Yep! good fast access on a ping to linuxcnc.org (58 ms), about double
that to cvs.linuxcnc.org
and no response to http://cvs.linuxcnc.org.
Traceroute to http://cvs.linuxcnc.org never even gets the first hop
which seems to say there is not a DNS entry for it.
Dave
On May 21, 2008, at 12:19 PM,
Screen shots on the CD are pretty cool.
Dave
On May 17, 2008, at 8:11 AM, Alex Joni wrote:
> I did these a while ago:
> http://dsplabs.cs.utt.ro/~juve/emc/cd-cover/
>
> I think I even printed a couple, somewhere around here :)
>
> Regards,
> Alex
>
> - Original Message -
> From: "Ray Henr
I have the cam for this one tucked away someplace if you are interested.
http://imagebin.ca/view/jfVk7CB.html
Dave
On May 15, 2008, at 10:10 AM, Kirk Wallace wrote:
Now that my Shizuoka is functional, I would like to try making a test
work piece. I would like it to have 3D compound curves, li
On May 11, 2008, at 3:12 AM, Gary Fixler wrote:
On Sat, May 10, 2008 at 7:53 AM, Dave Engvall
<[EMAIL PROTECTED]> wrote:
> The Mazak at Galesburg offsets (X and Y) to middle of table.
The limit switches yes but emc provides offsets after home.
I thought limit switches needed
Hi Dan, Ray:
I hate to admit it but I've been bitten by various unexplainable
things because I needed a couple more cups of coffee.
Setting G49 to cancel tool offset in your entry code is usually a
good idea just like setting G40 is.
If you use a G43Hxx then the xx and the tool table will dete
Hi Robert,
On May 9, 2008, at 7:21 PM, rtwas wrote:
> Hello,
>
> Being new to g-code and cnc I've been trying to learn the best way to
> think about
> the coordinate spaces and offsets etc (for a cnc mill).
I'm not certain there is a 'best' way to think about coordinate space.
One must home to
stg1 ... had it forever. ;-)
Dave
On May 9, 2008, at 2:40 AM, Alex Joni wrote:
>> Home on index now works for the stg card ( I think thanks there go to
>> alex).
>
> Thanks for reporting that. Is that a STG1 or 2?
>
> Regards,
> Alex
>
>
> -
Hi Aram,
RS-274NGC as far as I can tell just doesn't provide for special
functions. It does provide G01, G02, G03. Anything else is programmed
by using that facility and programming externally. A few
manufacturers have provided splines specially coded within their
version of the interprete
Hi all,
Just wanted to express my thanks to all the developers and others
that have helped with the latest release
of emc.
I started at about 11:00 am this morning to update my 2.0.0 to the
latest release.
Installed Live off the CD then did the updates (which took about 1.5
hours). I swear e
On May 7, 2008, at 7:24 PM, Jon Elson wrote:
> Witek GB wrote:
>> I am thinking of taking the plunge and buying a VMC maybe with an
>> ATC.
>> I plan on buying it for the iron and upgrading it to EMC. I have
>> manual
>> machine tools already so I know what to look for when I see a manual
>>
Ah! Brave soul but on the right track.
Having converted a Mazak V5 I have a certain viewpoint. Looking at
the emc wiki pages on the conversion of the
Mazak at Cardinal Engineering will give a slightly different view. My
Mazak was well used and had apparently cut Al all of its life.
Backlash
Duh! edit those rates to ipm.
Dave
On May 6, 2008, at 8:37 AM, Dave Engvall wrote:
> Hi,
> I'm milling a tapered hole using helical interp.
> The program works fine but can't keep up.
> With a HSS ball mill I've been millling at 4 ips.
> With carbide I could raise
room and/
or drive togather and split the cost?
Thank you
Dale
Dave Engvall <[EMAIL PROTECTED]> wrote:
Just hang out in the emc area; there is always something going on. :-)
Dave
On May 6, 2008, at 6:48 AM, Stuart Stevenson wrote:
>> Message: 2
>> Date: Mon, 5 May 2
Hi,
I'm milling a tapered hole using helical interp.
The program works fine but can't keep up.
With a HSS ball mill I've been millling at 4 ips.
With carbide I could raise that to 10 ips.
At either speed it maintains speed 'til about 1/2 way thru the
program then starts to pause and go, pause an
Just hang out in the emc area; there is always something going on. :-)
Dave
On May 6, 2008, at 6:48 AM, Stuart Stevenson wrote:
>> Message: 2
>> Date: Mon, 5 May 2008 19:27:21 -0700 (PDT)
>> From: Dale Ertley <[EMAIL PROTECTED]>
>> Subject: [Emc-users] EMC Fest 2008
>> To: emc-users@lists.so
By default the outputs of the 8255 are pulled high by a 100K
resistor. Jumper W1 will flip that.
See pages 3-11,12 of the manual.
Dave
On May 3, 2008, at 7:27 AM, <[EMAIL PROTECTED]> wrote:
>
> Hi Dave. Fascinating experiment. The ax driver is intended for a
> 48 IO ISA card but I'd h
I just took a quick look but this may help.
http://www.ni.com/pdf/manuals/374938a.pdf
Dave
On May 2, 2008, at 6:36 PM, Dave Keeton wrote:
> So I have installed the PCI-DIO-96 board in the computer.Ubuntu
> picked
> it up in the Device manager and called it by name.How do I go
> abou
ginal Message-
>> From: [EMAIL PROTECTED]
>> [mailto:[EMAIL PROTECTED] Behalf Of John
>> Kasunich
>> Sent: Friday, May 02, 2008 10:41 AM
>> To: Enhanced Machine Controller (EMC)
>> Subject: Re: [Emc-users] "Un-Homing" an axis
>>
>>
On May 1, 2008, at 10:43 PM, Carl Helquist wrote:
> Somewhat related to the overriding limits topic, but I think different
> enough to start a new topic:
>
> I am using soft limits on my machine. If I accidently click on home
> instead of touch-off (the buttons are right next to each other) at
>
On Apr 30, 2008, at 11:15 AM, Janos Dosa wrote:
At the speed of 2100 mm/min the error from the theoretical path is
huge around 50mm (2 inches) or so. Same problem in smaller scale if
the machine is slower.
Your machine should fault with a following error long before it gets
to 2" of er
Certainly cheaper over the net than physical transport. I did look at
flights and they were not cheap (~ 1400 to 1800) and will probably
increase by 20% or so by next year. :-(
Living in dry country I also looked at the temps and humidity. ...
pretty steady 25-30 degrees with 70 +/- 5% humi
NI makes a 96 I/O pci card. I picked one up off ebay and it has been
sitting here for a couple of years.
If anyone is interested contact me off list.
http://sine.ni.com/nips/cds/view/p/lang/en/nid/14331
I have the card and the dual 1 m cables but not the connector block.
Dave
On Apr 27, 2008,
Hi Aram,
I did find a high res encoder at 1250K counts/rev. I'm not really
certain that is ppr or in quadrature.
Price is in the $1000 range.
http://www.opticalencoder.com/pdf/CP-850-950-HHC.pdf
Dave
On Apr 22, 2008, at 11:09 AM, [EMAIL PROTECTED] wrote:
> Hi
> I have 3 questions.
> First if
Hi Aram,
I'm certainly grateful that this is not my application because I
suspect there are a lot of compromises to be made.
Assumptions:
a. the system doesn't need accuracy in both directions; i.e. is not
backlash sensitive
b. it really does not have to be direct driven
Hi all,
Finally got around to making mounts for my 7i33 and 7i37 with breakouts.
The image is the 7i33 with breakout and Honda MR-20 connectors for
the encoders.
Maybe someday I'll get a friend (who likes to do this stuff) arrange
the leads in a neat manner.
The extra layer of mounting you
Sorry, didn't mean to step on toes. The writer of that portion of the
wiki seemed to be doing OK until they got
to the part about the osc and hunting of servos.
Dave
On Apr 19, 2008, at 7:01 AM, Kirk Wallace wrote:
> On Fri, 2008-04-18 at 22:15 -0700, Dave Engvall wrote:
>> On Ap
ohn
>
> On 18 Apr 2008 at 22:08, Dave Engvall wrote:
>
>> Hi Jon,
>>
>> On the other end of the scale I once set up a test bed with a MT30H4
>> SEM servo motor being driven by a 1525BR servo amp at 165 V (pretty
>> hot) using the ppmc board set. The SEM had a
On Apr 18, 2008, at 9:09 PM, Kirk Wallace wrote:
> On Fri, 2008-04-18 at 22:13 -0500, Jon Elson wrote:
> ... snip
>> No, I think I got your point exactly, and I don't think steppers
>> have a really good answer for this. You can't split a step, or
>> tell it how long to take to get from one step
Hi Jon,
On the other end of the scale I once set up a test bed with a MT30H4
SEM servo motor being driven by a 1525BR
servo amp at 165 V (pretty hot) using the ppmc board set. The SEM had
a 2.5" dia by 2.5" piece of bar stock as a
flywheel. Accel was set at 400 in/sec/sec (slightly above 1 G).
Ah! Yes. Stopped to think and forgot to start again.
Been there, done that.
Dave
On Apr 17, 2008, at 2:58 PM, Stuart Stevenson wrote:
>> --
>>
>> Message: 5
>> Date: Thu, 17 Apr 2008 12:09:50 -0700
>> From: "Glenn Stewart" <[EMAIL PROTECTED]>
>> Subject: Re: [Emc-
of
the spindle drive.
Dave
On Apr 15, 2008, at 9:05 AM, Jon Elson wrote:
> Dave Engvall wrote:
>>
>> S (new spindle speed) M5 (or the M5 can be implied) Mxx (where xx
>> specifies gear change), xx (gear) or autoselect (M3 should be
>> implied after the gear chan
Hi Chris,
This could be a good place to start a religious war. On the other
hand I think some of the choices are fairly obvious, or will be until
someone points out a glaring omission. ;-)
I'm kinda with Ray in that I don't see a necessity to use up a whole
string of M codes (think > 16 gear
Hi Stuart,
Take a look at the spindle speed, gear change for the Mazak
conversion done at fest.
http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?MazakRetro
should get you close.
the classicladder code is in /emc2/configs/mazak_demo/
mazak_demo.clp
HTH
Dave
On Apr 14, 2008, at 11:01 AM, Stua
Thanks Jon,
Sometimes rants are needed.
As obvious as it would seem that spindle should be modal RS-274NGC is
not too helpful.
It does say that M codes (grp 7) M3, M4, M5 are a modal group but
somehow that got overlooked in the
restart scan implementation. Nothing is said about S being modal as
Hi Stuart,
OUCH! Those sound like a larger version of the Fijitsu-Fanuc amps I
pulled off the Mazak.
Rather slow by todays standards and not PWM so more heat.
If that is really 33 amps average and not peak then those are big amps.
I used Servo Dynamics 1525's on the Mazak but then they only have
Not that I know of.
dave
On Apr 2, 2008, at 3:42 PM, Kirk Wallace wrote:
> On Wed, 2008-04-02 at 11:06 -0700, Dave Engvall wrote:
>> For synergy users: (FYI)
>>
>> Gcode output from synergy defaults to a tool path at the tool radius
>> offset and then expects the too
For synergy users: (FYI)
Gcode output from synergy defaults to a tool path at the tool radius
offset and then expects the tool table
to contain minor corrections from this. This scheme doesn't play well
with emc.
However it is possible to generate zero offset paths in synergy; the
only draw
On Mar 27, 2008, at 6:12 PM, Jeff Epler wrote:
> In your .hal file, connect the index-enable pin of the encoder counter
> and the associated axis.N.index-enable.
>
> In your .ini file, set HOME_SEARCH_VEL to 0 (or omit it), and set
> HOME_LATCH_VEL to the speed at which you want to move during th
Hi Gene,
Two fluters work well for slotting or anyplace you have trouble
getting rid of the chips.
The harder the Al the easier it makes good chips. 6061-T6, 7050-
T651, 7075-T651 are good choices.
Recutting of chips that don't get out of the way generates lots of
heat and more mess as well a
On Mar 26, 2008, at 6:06 AM, Anders Wallin wrote:
>>
> Some jogwheels use differential signals, which means instead of
> just the
> A and B signals you get A+, A-, B+, and B-. If you have I/O to
> spare you
> could wire all four of these to EMC. If you want to condense these
> four
> into
est code will be executed. If the file is loaded on demand,
> the test
> code will not be executed. That's a purely accidental consequence
> of how
> things have been defined, but it's still prety neat.
>
> Ken
>
> - Original Message -
> From: &qu
Hi,
It would indeed be a nice feature if one could use a script to
sequentially run a series of g-code files. :-)
Dave
On Mar 21, 2008, at 8:51 AM, Stephen Wille Padnos wrote:
> rtwas wrote:
>
>> Hello,
>>
>> In the "Language Overview" section of the manual:
>>
>> http://www.linuxcnc.org/docs/2
On Mar 20, 2008, at 1:16 PM, list wrote:
> Thanks for the info. Just wanted to make sure PWM (or PDM) up/down was
> possible with Mesa boards. For the money, I knew the 7i43 was a good
> deal with 8 encoders/8 PWM outputs plus additional unused FPGA space
> compared with Pluto's 4/4. Sebastian an
Hi Doug,
I've had passable luck on ebay for ball screws. Sometime you look and
there is nothing and other times several good ones. Just depends.
Good hunting.
Dave
On Mar 14, 2008, at 5:24 AM, <[EMAIL PROTECTED]> wrote:
Hey Doug. Thanks for the report. Good thoughts all.
You might look
Hi all,
Just to confuse the issue: has anyone done electrolytic polishingd/
deburring.
It should work fine with diluted sulfuric acid for steel of stainless
steel but on aluminum you probably get both deburring and anodizing.
Not that that is bad if you don't want a bright surface. Just
th
Hi Stuart,
I have to play dumb here. I just let Synergy do it's thing. I didn't
find anything in the post.
If you draw it correctly it seems synergy will do it.
I think emc is double precision internally. Plenty of resolution. :-)
Someone will correct me if this is incorrect. ;-)
Dave
On Mar 10
Hi Patrice,
You can use the link below to get to the page index for the emc wiki.
Peruse the Mazak entries for an idea of how a conversion goes
(went). ;-)
http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?action=index
HTH
Dave
On Mar 10, 2008, at 10:39 AM, Jon Elson wrote:
> patrice.vallade Valla
; I am not sure of the term, but is there a mill and lathe machine
> personality that fits EMC?
>
> Kirk
>
> On Mon, 2008-03-10 at 08:37 -0700, Dave Engvall wrote:
>> Hi Ben,
>> Remember, Synergy does things differently. It writes code that is
>> offset by cutte
Hi Ben,
Remember, Synergy does things differently. It writes code that is
offset by cutter radius and also uses G41/G42.
This means the tool table diameters need to be zero. Small deviations
are then entered into the tool table to
compensate for sharpening or small adjustments in dimensioning.
301 - 400 of 528 matches
Mail list logo