On Sat, 15 Feb 2020, dave engvall wrote:
Date: Sat, 15 Feb 2020 12:45:26 -0800
From: dave engvall
Reply-To: "Enhanced Machine Controller (EMC)"
To: "Enhanced Machine Controller (EMC)"
Subject: [Emc-users] just call me grumpy! (7i43)
Hi all,
A quick look at web sources seems to indicate
On Mon, 27 Jan 2020, John Dammeyer wrote:
Date: Mon, 27 Jan 2020 14:02:12 -0800
From: John Dammeyer
Reply-To: "Enhanced Machine Controller (EMC)"
To: "'Enhanced Machine Controller (EMC)'"
Subject: Re: [Emc-users] MESA 7i92H hiccup
So I guess two questions.
1. If it happens again what ty
My first guess would be a damaged I/O pin on the 7I92H (so marginal levels)
BTW, a good way to check for I/O pin damage is to check the input protection
diodes with an Ohmmeters diode check function (positive lead to ground, negative
lead to I/O line)
All lines should show a consistent ~0
On Mon, 27 Jan 2020, John Dammeyer wrote:
Date: Mon, 27 Jan 2020 12:27:31 -0800
From: John Dammeyer
Reply-To: "Enhanced Machine Controller (EMC)"
To: "'Enhanced Machine Controller (EMC)'"
Subject: [Emc-users] MESA 7i92H hiccup
Hi everyone,
Been working on my Spindle Control with the adap
On Sun, 26 Jan 2020, Gene Heskett wrote:
Date: Sun, 26 Jan 2020 03:33:29 -0500
From: Gene Heskett
Reply-To: "Enhanced Machine Controller (EMC)"
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Real-time OS for machine controllers
On Sunday 26 January 2020 02:57:28 Andy Pugh wr
On Fri, 24 Jan 2020, Brent Loschen wrote:
Date: Fri, 24 Jan 2020 14:00:06 -0700
From: Brent Loschen
Reply-To: "Enhanced Machine Controller (EMC)"
To: "Enhanced Machine Controller (EMC)"
Subject: [Emc-users] Question regarding power requirements for 7i76 Spindle+
and Spindle-
I curre
On Thu, 23 Jan 2020, Chris Albertson wrote:
Date: Thu, 23 Jan 2020 10:17:44 -0800
From: Chris Albertson
Reply-To: "Enhanced Machine Controller (EMC)"
To: "Enhanced Machine Controller (EMC)"
Subject: Re: [Emc-users] Real-time OS for machine controllers
The trouble with the Mesa FPGA desig
On Sat, 18 Jan 2020, Gene Heskett wrote:
Date: Sat, 18 Jan 2020 15:58:23 -0500
From: Gene Heskett
Reply-To: "Enhanced Machine Controller (EMC)"
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] I'm back to a sseriel failure that can only be fixed
with a full powerdown of the
On Tue, 14 Jan 2020, Brent Loschen wrote:
Date: Tue, 14 Jan 2020 20:06:36 -0700
From: Brent Loschen
Reply-To: "Enhanced Machine Controller (EMC)"
To: "Enhanced Machine Controller (EMC)"
Subject: [Emc-users] help with spindle speed
Almost a year ago I converted my servo'd Bridgeport/Boss
On Mon, 13 Jan 2020, andy pugh wrote:
Date: Mon, 13 Jan 2020 10:27:58 +
From: andy pugh
Reply-To: "Enhanced Machine Controller (EMC)"
To: "Enhanced Machine Controller (EMC)"
Subject: Re: [Emc-users] MESA 7i92H Power
On Mon, 13 Jan 2020 at 05:18, John Dammeyer wrote:
I have LinuxC
On Fri, 3 Jan 2020, Gene Heskett wrote:
Date: Fri, 3 Jan 2020 09:41:26 -0500
From: Gene Heskett
Reply-To: "Enhanced Machine Controller (EMC)"
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Somewhat of a puzzler with a 7i76D
On Thursday 02 January 2020 15:59:09 Gene Heskett w
On Sun, 29 Dec 2019, andrew beck wrote:
Date: Sun, 29 Dec 2019 23:19:20 +1300
From: andrew beck
Reply-To: "Enhanced Machine Controller (EMC)"
To: "Enhanced Machine Controller (EMC)"
Subject: Re: [Emc-users] looking for advice on best wiring practices and
grounding on cnc mills
SNIP-
On Wed, 18 Dec 2019, Leonardo Marsaglia wrote:
Date: Wed, 18 Dec 2019 17:16:15 -0300
From: Leonardo Marsaglia
Reply-To: "Enhanced Machine Controller (EMC)"
To: "Enhanced Machine Controller (EMC)"
Subject: Re: [Emc-users] 6i24 + 7i44 configuration
1. what size FPGA do you have (-16 or -2
On Wed, 18 Dec 2019, Leonardo Marsaglia wrote:
Date: Wed, 18 Dec 2019 09:01:50 -0300
From: Leonardo Marsaglia
Reply-To: "Enhanced Machine Controller (EMC)"
To: "Enhanced Machine Controller (EMC)"
Subject: Re: [Emc-users] 6i24 + 7i44 configuration
Thanks Andy.
I have doubts about the p
On Tue, 17 Dec 2019, andy pugh wrote:
Date: Tue, 17 Dec 2019 11:32:22 +
From: andy pugh
Reply-To: "Enhanced Machine Controller (EMC)"
To: "Enhanced Machine Controller (EMC)"
Subject: Re: [Emc-users] Latency Warning Messages
On Mon, 16 Dec 2019 at 23:42, John Dammeyer wrote:
For ex
On Mon, 16 Dec 2019, Gene Heskett wrote:
Date: Mon, 16 Dec 2019 12:24:56 -0500
From: Gene Heskett
Reply-To: "Enhanced Machine Controller (EMC)"
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] 6i24 + 7i44 configuration
On Monday 16 December 2019 11:14:02 andy pugh wrote:
On
On Mon, 16 Dec 2019, Gene Heskett wrote:
Date: Mon, 16 Dec 2019 12:24:56 -0500
From: Gene Heskett
Reply-To: "Enhanced Machine Controller (EMC)"
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] 6i24 + 7i44 configuration
On Monday 16 December 2019 11:14:02 andy pugh wrote:
On
On Sun, 15 Dec 2019, Leonardo Marsaglia wrote:
Date: Sun, 15 Dec 2019 23:27:16 -0300
From: Leonardo Marsaglia
Reply-To: "Enhanced Machine Controller (EMC)"
To: "Enhanced Machine Controller (EMC)"
Subject: Re: [Emc-users] 6i24 + 7i44 configuration
Hello John,
I don't know If I understan
On Sun, 15 Dec 2019, Leonardo Marsaglia wrote:
Date: Sun, 15 Dec 2019 22:45:23 -0300
From: Leonardo Marsaglia
Reply-To: "Enhanced Machine Controller (EMC)"
To: "Enhanced Machine Controller (EMC)"
Subject: Re: [Emc-users] 6i24 + 7i44 configuration
By the way, I'm using the 6i24-25 board a
c.
630 Henry Street
Dalton, Ohio 44618
Phone: (330)828-2105ext. 2031
-Original Message-
From: Peter C. Wallace
Sent: Tuesday, December 10, 2019 4:28 PM
To: Enhanced Machine Controller (EMC)
Subject: Re: [Emc-users] Need a
power signal independent of linuxcnc.
I did a quick t
I did a quick test to see if I could confuse a 7I76 by sending it
garbage/interrupted transmissions (cycling the FPGA side power while doing high
speed comms. I did this 500 times without the 7i76 I/O processor ever requiring
a power cycle to recover. I still think this is some other issue (powe
9 11:52:06 Peter C. Wallace wrote:
On Tue, 10 Dec 2019, Gene Heskett wrote:
Date: Tue, 10 Dec 2019 11:18:11 -0500
From: Gene Heskett
Reply-To: "Enhanced Machine Controller (EMC)"
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Need a power signal independent of
linu
9 10:16:16 Peter C. Wallace wrote:
On Tue, 10 Dec 2019, Gene Heskett wrote:
Date: Tue, 10 Dec 2019 06:46:16 -0500
From: Gene Heskett
Reply-To: "Enhanced Machine Controller (EMC)"
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Need a power signal independent of
lin
On Tue, 10 Dec 2019, Gene Heskett wrote:
Date: Tue, 10 Dec 2019 06:46:16 -0500
From: Gene Heskett
Reply-To: "Enhanced Machine Controller (EMC)"
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Need a power signal independent of linuxcnc.
On Monday 09 December 2019 22:45:26 Gen
On Thu, 5 Dec 2019, Gene Heskett wrote:
Date: Thu, 5 Dec 2019 16:14:57 -0500
From: Gene Heskett
Reply-To: "Enhanced Machine Controller (EMC)"
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] parallel port picie cards
On Thursday 05 December 2019 15:01:25 Bruce Layne wrote:
On Sun, 3 Nov 2019, John Dammeyer wrote:
Date: Sun, 3 Nov 2019 08:22:44 -0800
From: John Dammeyer
Reply-To: "Enhanced Machine Controller (EMC)"
To: "'Enhanced Machine Controller (EMC)'"
Subject: [Emc-users] MESA 7i92H changes
Currently my MESA 792H is configured with DB25-14 and DB25-161
On Thu, 24 Oct 2019, Gene Heskett wrote:
Date: Thu, 24 Oct 2019 21:44:36 -0400
From: Gene Heskett
Reply-To: "Enhanced Machine Controller (EMC)"
To: "Enhanced Machine Controller (EMC)"
Subject: [Emc-users] hal syntax maybe?
Greetings all;
I have added two pwmgen's to the config strings o
On Sun, 6 Oct 2019, Dave Matthews wrote:
Date: Sun, 6 Oct 2019 16:04:49 -0400
From: Dave Matthews
Reply-To: "Enhanced Machine Controller (EMC)"
To: "Enhanced Machine Controller (EMC)"
Subject: [Emc-users] Mesa cards for a CNC router
I am thinking about changing my Gatton CNC over from a
On Thu, 3 Oct 2019, Gene Heskett wrote:
Date: Thu, 3 Oct 2019 10:38:51 -0400
From: Gene Heskett
Reply-To: "Enhanced Machine Controller (EMC)"
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Real-Time Linux on the Raspberry Pi
On Thursday 03 October 2019 10:17:
On Thu, 3 Oct 2019, Gene Heskett wrote:
Date: Thu, 3 Oct 2019 10:08:00 -0400
From: Gene Heskett
Reply-To: "Enhanced Machine Controller (EMC)"
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Real-Time Linux on the Raspberry Pi
On Thursday 03 October 2019 08:25:10 Thomas J Powd
On Fri, 20 Sep 2019, John Dammeyer wrote:
Date: Fri, 20 Sep 2019 12:47:53 -0700
From: John Dammeyer
Reply-To: "Enhanced Machine Controller (EMC)"
To: "'Enhanced Machine Controller (EMC)'"
Subject: Re: [Emc-users] MESA 7i92H Power
And Peter, you stated previously that it's more versatile
On Fri, 20 Sep 2019, John Dammeyer wrote:
Date: Fri, 20 Sep 2019 11:08:51 -0700
From: John Dammeyer
Reply-To: "Enhanced Machine Controller (EMC)"
To: "'Enhanced Machine Controller (EMC)'"
Subject: Re: [Emc-users] MESA 7i92H Power
Perhaps I'm really just missing something obvious here.
On Fri, 20 Sep 2019, John Dammeyer wrote:
Date: Fri, 20 Sep 2019 09:24:52 -0700
From: John Dammeyer
Reply-To: "Enhanced Machine Controller (EMC)"
To: "'Enhanced Machine Controller (EMC)'"
Subject: Re: [Emc-users] MESA 7i92H Power
Peter,
Actually I have found that its better in general
On Fri, 20 Sep 2019, John Dammeyer wrote:
Date: Fri, 20 Sep 2019 09:22:39 -0700
From: John Dammeyer
Reply-To: "Enhanced Machine Controller (EMC)"
To: "'Enhanced Machine Controller (EMC)'"
Subject: Re: [Emc-users] MESA 7i92H Power
Hi Andy,
-Original Message-
From: andy pugh [m
----Original Message-
From: Peter C. Wallace [mailto:p...@mesanet.com]
Sent: September-20-19 6:57 AM
To: Enhanced Machine Controller (EMC)
Subject: Re: [Emc-users] MESA 7i92H Power
On Thu, 19 Sep 2019, John Dammeyer wrote:
Date: Thu, 19 Sep 2019 23:01:01 -0700
From: John Dammeyer
Reply-To: &qu
On Thu, 19 Sep 2019, John Dammeyer wrote:
Date: Thu, 19 Sep 2019 23:01:01 -0700
From: John Dammeyer
Reply-To: "Enhanced Machine Controller (EMC)"
To: "'Enhanced Machine Controller (EMC)'"
Subject: Re: [Emc-users] MESA 7i92H Power
I've been bread boarding some circuits and mulling over th
On Mon, 9 Sep 2019, andrew beck wrote:
Date: Mon, 9 Sep 2019 21:38:49 +1200
From: andrew beck
Reply-To: "Enhanced Machine Controller (EMC)"
To: "Enhanced Machine Controller (EMC)"
Subject: Re: [Emc-users] Step timing and max velocity
Hey Andypugh and PCW.
PCW
I will attach my Ini files
On Sun, 8 Sep 2019, Gene Heskett wrote:
Date: Sun, 8 Sep 2019 11:44:23 -0400
From: Gene Heskett
Reply-To: "Enhanced Machine Controller (EMC)"
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Step timing and max velocity
On Sunday 08 September 2019 06:55:58 Peter
On Sun, 8 Sep 2019, andy pugh wrote:
Date: Sun, 8 Sep 2019 10:50:54 +0100
From: andy pugh
Reply-To: "Enhanced Machine Controller (EMC)"
To: "Enhanced Machine Controller (EMC)"
Subject: Re: [Emc-users] Step timing and max velocity
On Sun, 8 Sep 2019 at 04:41, andrew beck wrote:
I can mo
On Wed, 4 Sep 2019, Marius Liebenberg wrote:
Date: Wed, 4 Sep 2019 21:03:10 +0200
From: Marius Liebenberg
Reply-To: "Enhanced Machine Controller (EMC)"
To: "Enhanced Machine Controller (EMC)"
Subject: [Emc-users] Mesa PIN file description
Hi all
Does anyone know of a document or a descr
On Tue, 3 Sep 2019, Marius Liebenberg wrote:
Date: Tue, 3 Sep 2019 10:04:51 +0200
From: Marius Liebenberg
Reply-To: "Enhanced Machine Controller (EMC)"
To: "Enhanced Machine Controller (EMC)"
Subject: [Emc-users] Error compiling Mesa bit file for 7i76E
Hi All
With a lot of help from Pet
On Sat, 31 Aug 2019, Marius Liebenberg wrote:
Date: Sat, 31 Aug 2019 12:50:32 +0200
From: Marius Liebenberg
Reply-To: "Enhanced Machine Controller (EMC)"
To: "Enhanced Machine Controller (EMC)"
Subject: [Emc-users] Compiling mesa bit files
Hi All,
I am trying my hand at getting my own m
Yes, you can see page 2 of the 5I25 manual:
W1 (P2 POWER ) W2 (P3 POWER)
UP UP BREAKOUT POWER ENABLED
DOWN DOWN BREAKOUT POWER DISABLED (DEFAULT)
Note that you also need to set the 7I76/7I76D in the correct mode:
W2 left = gets 5V powe
On Thu, 29 Aug 2019, Gene Heskett wrote:
Date: Thu, 29 Aug 2019 12:55:31 -0400
From: Gene Heskett
Reply-To: "Enhanced Machine Controller (EMC)"
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Pin files for 5i25
On Thursday 29 August 2019 08:40:03 Todd Zuercher wrote:
-O
On Wed, 28 Aug 2019, John Dammeyer wrote:
Date: Wed, 28 Aug 2019 21:05:58 -0700
From: John Dammeyer
Reply-To: "Enhanced Machine Controller (EMC)"
To: "'Enhanced Machine Controller (EMC)'"
Subject: Re: [Emc-users] MESA 7i92H Saga
This what the halcmd produced for the Y axis.
28 bit
On Wed, 28 Aug 2019, John Dammeyer wrote:
Date: Wed, 28 Aug 2019 19:22:09 -0700
From: John Dammeyer
Reply-To: "Enhanced Machine Controller (EMC)"
To: "'Enhanced Machine Controller (EMC)'"
Subject: Re: [Emc-users] MESA 7i92H Saga
Gene,
You've got it backwards. The parallel port version
Now a new problem or not so much a problem but I can't figure out how to fix it
and it's probably right in front of my nose.
The Z axis is a knee, not a quill and on the 7i92H the knee is now going in the
wrong direction. On the para
http://freeby.mesanet.com/5i25_7i76_5abob.bit
7I76 on P3, Cheap Ebay "5 Axis" BOB on P2
Peter Wallace
Mesa Electronics
(\__/)
(='.'=) This is Bunny. Copy and paste bunny into your
(")_(") signature to help him gain world domination.
___
Emc-users
On Tue, 27 Aug 2019, Marius Liebenberg wrote:
Date: Tue, 27 Aug 2019 21:17:19 +0200
From: Marius Liebenberg
Reply-To: "Enhanced Machine Controller (EMC)"
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Pin files for 5i25
On 8/27/2019 8:48 PM, Marius Liebenberg wrote:
On
On Tue, 27 Aug 2019, Marius Liebenberg wrote:
Date: Tue, 27 Aug 2019 20:25:53 +0200
From: Marius Liebenberg
Reply-To: "Enhanced Machine Controller (EMC)"
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Pin files for 5i25
On 8/27/2019 1:36 PM, Marius Liebenberg wrote:
Hi all
On Tue, 27 Aug 2019, Marius Liebenberg wrote:
Date: Tue, 27 Aug 2019 13:36:35 +0200
From: Marius Liebenberg
Reply-To: "Enhanced Machine Controller (EMC)"
To: "Enhanced Machine Controller (EMC)"
Subject: [Emc-users] Pin files for 5i25
Hi all
I need to set a 5i25 up as a dual lpt port. I
On Wed, 21 Aug 2019, John Dammeyer wrote:
Date: Wed, 21 Aug 2019 23:12:34 -0700
From: John Dammeyer
Reply-To: "Enhanced Machine Controller (EMC)"
To: "'Enhanced Machine Controller (EMC)'"
Subject: Re: [Emc-users] MESA 7i92H Saga
Hi Tom,
Alas. No. Still not found.
I could probably sudo ap
of adding the non-open source
driver package
Might be easier to find a supported WIFI adapter (I'm using some $8.00 edimax
thing here thats trouble free and has built in support)
Or find a low profile PCI Ethernet card
John
-----Original Message-
From: Peter C. Wallace [mailto:p...@m
On Wed, 21 Aug 2019, John Dammeyer wrote:
Date: Wed, 21 Aug 2019 19:01:35 -0700
From: John Dammeyer
Reply-To: "Enhanced Machine Controller (EMC)"
To: "'Enhanced Machine Controller (EMC)'"
Subject: Re: [Emc-users] MESA 7i92H Saga
originally created by pncconfig. Should not
>>> setp h
On Wed, 21 Aug 2019, John Dammeyer wrote:
Date: Wed, 21 Aug 2019 18:51:34 -0700
From: John Dammeyer
Reply-To: "Enhanced Machine Controller (EMC)"
To: "'Enhanced Machine Controller (EMC)'"
Subject: Re: [Emc-users] MESA 7i92H Saga
And although DIRSETUP in the ini file is set to 1000 nS th
This didn't make any difference. What does fix it is disabling BACKLASH.
And that led me to the STEPGEN_MAXACCEL set too low. Initial testing didn't
have backlash enabled so the 25% increase in STEPGEN_MAXACCEL was more than
adequate. But with backlash enabled it broke. Should really
On Wed, 21 Aug 2019, John Dammeyer wrote:
Date: Wed, 21 Aug 2019 17:16:50 -0700
From: John Dammeyer
Reply-To: "Enhanced Machine Controller (EMC)"
To: "'Enhanced Machine Controller (EMC)'"
Subject: Re: [Emc-users] MESA 7i92H Saga
In case anyone is interested:
%
G0 X0.000
G0 X0.001
%
Sta
On Wed, 21 Aug 2019, John Dammeyer wrote:
Date: Wed, 21 Aug 2019 15:18:25 -0700
From: John Dammeyer
Reply-To: "Enhanced Machine Controller (EMC)"
To: "'Enhanced Machine Controller (EMC)'"
Subject: Re: [Emc-users] MESA 7i92H Saga
Thanks Peter,
I've got pulses coming out the Spindle Pins o
On Tue, 20 Aug 2019, John Dammeyer wrote:
Date: Tue, 20 Aug 2019 12:47:12 -0700
From: John Dammeyer
Reply-To: "Enhanced Machine Controller (EMC)"
To: "'Enhanced Machine Controller (EMC)'"
Subject: Re: [Emc-users] MESA 7i92H Saga
Asking again.
The only web link I found on this subject i
On Sat, 17 Aug 2019, John Dammeyer wrote:
Date: Sat, 17 Aug 2019 14:15:14 -0700
From: John Dammeyer
Reply-To: "Enhanced Machine Controller (EMC)"
To: "'Enhanced Machine Controller (EMC)'"
Subject: Re: [Emc-users] MESA 7i92H Saga
Alright.
Installed the newest LiveCD Stretch version repla
source
On 17/08/2019 16:52, Peter C. Wallace wrote:
Ack! I thought this might be a simple PID related problem but it looks
like a error introduced to motion (by joints-axis?) The joint command
follows the joint feedback at the step on index but the ferror
calculation seems like its not in the co
On Sat, 17 Aug 2019, Les Newell wrote:
Date: Sat, 17 Aug 2019 16:30:12 +0100
From: Les Newell
To: Peter C. Wallace
Subject: Re: [Emc-users] Homing following error (was PID feed forward)
Hi Peter,
Yes, it tripped a following error fault. I have attached a plot showing the
following error
or
(scope2.png,halscope2.zip,scope2.txt).
Thanks,
Frank
-----Original Message-
From: Peter C. Wallace [mailto:p...@mesanet.com]
Sent: Saturday, 17 August 2019 3:16 AM
To: Enhanced Machine Controller (EMC)
Subject: Re: [Emc-users] Homing following error (was PID feed forward)
On Fri, 16 Aug 2019
On Fri, 16 Aug 2019, Les Newell wrote:
Date: Fri, 16 Aug 2019 17:18:01 +0100
From: Les Newell
Reply-To: "Enhanced Machine Controller (EMC)"
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Homing following error (was PID feed forward)
I think it is same issue as you. I'm still
On Fri, 16 Aug 2019, Frank Tkalcevic wrote:
Date: Fri, 16 Aug 2019 09:44:04 +1000
From: Frank Tkalcevic
Reply-To: "Enhanced Machine Controller (EMC)"
To: "'Enhanced Machine Controller (EMC)'"
Subject: [Emc-users] Homing following error (was PID feed forward)
If I leave it unconnected
On Sun, 11 Aug 2019, Andy Pugh wrote:
Date: Sun, 11 Aug 2019 19:27:19 +0100
From: Andy Pugh
Reply-To: "Enhanced Machine Controller (EMC)"
To: "Enhanced Machine Controller (EMC)"
Subject: Re: [Emc-users] PID feed forward
On 11 Aug 2019, at 18:11, Les Newell wrote:
What is the recomme
On Sun, 11 Aug 2019, Les Newell wrote:
Date: Sun, 11 Aug 2019 18:11:42 +0100
From: Les Newell
Reply-To: "Enhanced Machine Controller (EMC)"
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] PID feed forward
Thanks Peter,
That is exactly what the problem was. This hal file was
On Sun, 11 Aug 2019, Les Newell wrote:
Date: Sun, 11 Aug 2019 15:58:05 +0100
From: Les Newell
Reply-To: "Enhanced Machine Controller (EMC)"
To: emc-users@lists.sourceforge.net
Subject: [Emc-users] PID feed forward
Has feed forward changed recently? I have been using the build bot release
On Tue, 9 Jul 2019, bari wrote:
Date: Tue, 9 Jul 2019 11:02:47 -0500
From: bari
Reply-To: "Enhanced Machine Controller (EMC)"
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] best way to connect pendant to control box in back of
cnc mill
A -5 meter parallel port cable mig
On Sun, 7 Jul 2019, andrew beck wrote:
Date: Sun, 7 Jul 2019 00:55:54 +1200
From: andrew beck
Reply-To: "Enhanced Machine Controller (EMC)"
To: Emc-users@lists.sourceforge.net
Subject: [Emc-users] Help with stepgen joint error using Mesa 5i25 7i76 cards
Hey guys.
I will post this on the
On Fri, 5 Jul 2019, Andy Pugh wrote:
Date: Fri, 5 Jul 2019 23:57:52 +0100
From: Andy Pugh
Reply-To: "Enhanced Machine Controller (EMC)"
To: "Enhanced Machine Controller (EMC)"
Subject: Re: [Emc-users] Spindle Control
On 5 Jul 2019, at 19:41, Peter C. Wallace wrot
On Fri, 5 Jul 2019, John Dammeyer wrote:
Date: Fri, 5 Jul 2019 11:21:38 -0700
From: John Dammeyer
Reply-To: "Enhanced Machine Controller (EMC)"
To: "'Enhanced Machine Controller (EMC)'"
Subject: [Emc-users] Spindle Control
I have a small module (DC_06) from Homann Designs for generating
On Sun, 23 Jun 2019, John Dammeyer wrote:
Date: Sun, 23 Jun 2019 17:45:11 -0700
From: John Dammeyer
Reply-To: "Enhanced Machine Controller (EMC)"
To: "'Enhanced Machine Controller (EMC)'"
Subject: Re: [Emc-users] Dual boot for WIN-XP and LinuxCNC
So if I want Xstep on pin 2 and xdir on p
ndy, Peter,
So that begs the question. Am I the first to try using a 7i92H to replace
two
parallel ports for LinuxCNC? If it has been done is there not a simple
template for even just one of the DB-25 with simple step/dir, limit,
estop,
machine enable?
On Sun, 23 Jun 2019 at 22:47, Peter C. Wa
On Sun, 23 Jun 2019, John Dammeyer wrote:
Date: Sun, 23 Jun 2019 14:17:21 -0700
From: John Dammeyer
Reply-To: "Enhanced Machine Controller (EMC)"
To: "'Enhanced Machine Controller (EMC)'"
Subject: Re: [Emc-users] Dual boot for WIN-XP and LinuxCNC
Not sure why pncconf doesnt have a 7I
On Sat, 22 Jun 2019, John Dammeyer wrote:
Date: Sat, 22 Jun 2019 20:43:00 -0700
From: John Dammeyer
Reply-To: "Enhanced Machine Controller (EMC)"
To: "'Enhanced Machine Controller (EMC)'"
Subject: Re: [Emc-users] Dual boot for WIN-XP and LinuxCNC
My friend dropped off my new 7i92H card t
On Sat, 15 Jun 2019, Andrew wrote:
Date: Sat, 15 Jun 2019 10:30:36 +0300
From: Andrew
Reply-To: "Enhanced Machine Controller (EMC)"
To: "Enhanced Machine Controller (EMC)"
Subject: [Emc-users] 7C80
Hi,
Just wondering about 7C80 board, is it going to be available? Any problems
with SPI
On Fri, 14 Jun 2019, andy pugh wrote:
Date: Fri, 14 Jun 2019 00:25:06 +0100
From: andy pugh
Reply-To: "Enhanced Machine Controller (EMC)"
To: "Enhanced Machine Controller (EMC)"
Subject: Re: [Emc-users] LinuxCNC Processor
Killer product: Mesa 7i76 with a slot for the RPi compute module a
On Sat, 1 Jun 2019, John Dammeyer wrote:
Date: Sat, 1 Jun 2019 13:46:19 -0700
From: John Dammeyer
Reply-To: "Enhanced Machine Controller (EMC)"
To: "'Enhanced Machine Controller (EMC)'"
Subject: Re: [Emc-users] Dual boot for WIN-XP and LinuxCNC
Thanks Peter,
Therefore under LinuxCNC I
On Sat, 1 Jun 2019, John Dammeyer wrote:
Date: Sat, 1 Jun 2019 13:22:32 -0700
From: John Dammeyer
Reply-To: "Enhanced Machine Controller (EMC)"
To: "'Enhanced Machine Controller (EMC)'"
Subject: Re: [Emc-users] Dual boot for WIN-XP and LinuxCNC
Thanks Andy,
-Original Message-
F
On Sun, 19 May 2019, Davide wrote:
Date: Sun, 19 May 2019 20:49:07 +0200
From: Davide <77...@tiscali.it>
Reply-To: "Enhanced Machine Controller (EMC)"
To: Emc-users@lists.sourceforge.net
Subject: [Emc-users] Unusual help request.
The bob i'm using now is the keling c35, which gas buffer
On Sun, 19 May 2019, Davide wrote:
Date: Sun, 19 May 2019 19:33:51 +0200
From: Davide <77...@tiscali.it>
Reply-To: "Enhanced Machine Controller (EMC)"
To: Emc-users@lists.sourceforge.net
Subject: [Emc-users] Unusual help request.
Hi, and thanks for your suggestions.
The driver does sup
On Sun, 19 May 2019, Nicklas Karlsson wrote:
Date: Sun, 19 May 2019 18:27:44 +0200
From: Nicklas Karlsson
Reply-To: "Enhanced Machine Controller (EMC)"
To: "Enhanced Machine Controller (EMC)"
Subject: Re: [Emc-users] Unusual help request.
On Sun, 19 May 2019, Davide wrote:
Date: Sun,
On Sun, 19 May 2019, Davide wrote:
Date: Sun, 19 May 2019 16:26:26 +0200
From: Davide <77...@tiscali.it>
Reply-To: "Enhanced Machine Controller (EMC)"
To: Emc-users@lists.sourceforge.net
Subject: [Emc-users] Unusual help request.
Hi, I have a strange setup to solve. So I'm asking you an he
On Thu, 16 May 2019, bari wrote:
Date: Thu, 16 May 2019 15:10:12 -0500
From: bari
Reply-To: "Enhanced Machine Controller (EMC)"
To: "Enhanced Machine Controller (EMC)"
Subject: [Emc-users] New PC Hardware for preempt-rt and Mesa Ethernet
Anyone care to list which new cpus and motherboard
On Sun, 28 Apr 2019, Gene Heskett wrote:
Date: Sun, 28 Apr 2019 10:47:13 -0400
From: Gene Heskett
Reply-To: "Enhanced Machine Controller (EMC)"
To: emc-users@lists.sourceforge.net
Subject: [Emc-users] stretch testing install Q
Greetings;
As I wrote yesterday except for two things.
1. It
On Wed, 24 Apr 2019, Mark wrote:
Date: Wed, 24 Apr 2019 06:31:00 -0400
From: Mark
Reply-To: "Enhanced Machine Controller (EMC)"
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] possibly good news for LinuxCNC
On 4/24/19 06:26, andy pugh wrote:
On Wed, 24 Apr 2019 at 11:09, Ma
On Mon, 22 Apr 2019, Gene Heskett wrote:
Date: Mon, 22 Apr 2019 13:30:07 -0400
From: Gene Heskett
Reply-To: "Enhanced Machine Controller (EMC)"
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] possibly good news for LinuxCNC
On Monday 22 April 2019 11:48:58 Peter
On Mon, 22 Apr 2019, Gene Heskett wrote:
Date: Mon, 22 Apr 2019 10:58:01 -0400
From: Gene Heskett
Reply-To: "Enhanced Machine Controller (EMC)"
To: emc-users@lists.sourceforge.net
Subject: [Emc-users] possibly good news for LinuxCNC
Maybe this will be the icing on the cake for LinuxCNC to
On Thu, 11 Apr 2019, Gene Heskett wrote:
Date: Thu, 11 Apr 2019 17:56:45 -0400
From: Gene Heskett
Reply-To: "Enhanced Machine Controller (EMC)"
To: "Enhanced Machine Controller (EMC)"
Subject: [Emc-users] For PCW
Greetings Peter;
The new vfd materialized here today, and I see it actuall
On Wed, 10 Apr 2019, dan...@austin.rr.com wrote:
Date: Wed, 10 Apr 2019 20:39:06 +
From: dan...@austin.rr.com
Reply-To: "Enhanced Machine Controller (EMC)"
To: "'Enhanced Machine Controller (EMC)'"
Cc: "'Enhanced Machine Controller (EMC)'"
Subject: Re: [Emc-users] Hardware emcmot?
Fr
On Mon, 8 Apr 2019, rudy du preez wrote:
Date: Mon, 8 Apr 2019 08:58:45 +0200
From: rudy du preez
Reply-To: "Enhanced Machine Controller (EMC)"
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Motorman Robot with absolute Yaskawa
On Mon, 9 Sep 2013 at 14:48, Rudy du Preez
On Tue, 26 Mar 2019, andy pugh wrote:
Date: Tue, 26 Mar 2019 11:19:19 +
From: andy pugh
Reply-To: "Enhanced Machine Controller (EMC)"
To: "Enhanced Machine Controller (EMC)"
Subject: Re: [Emc-users] Rock64 pre-orders on Banggood.
On Tue, 26 Mar 2019 at 06:35, Chris Albertson wrote:
On Tue, 26 Mar 2019, Gene Heskett wrote:
Date: Tue, 26 Mar 2019 08:03:17 -0400
From: Gene Heskett
Reply-To: "Enhanced Machine Controller (EMC)"
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Rock64 pre-orders on Banggood.
On Tuesday 26 March 2019 07:19:19 andy pugh wrote:
On Tue, 12 Mar 2019, Gene Heskett wrote:
And I note, after making the first 4 inputs into analog, 8 bit digitized
voltage inputs by appending sseriel_port_0=1 to the hm2_pci config
string, (that I'll need to feed 12 volts to derive a to voltage scale
factor calibration) that the above 4 in
On Tue, 12 Mar 2019, Gene Heskett wrote:
Date: Tue, 12 Mar 2019 14:08:34 -0400
From: Gene Heskett
Reply-To: "Enhanced Machine Controller (EMC)"
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] More for PCW
On Tuesday 12 March 2019 11:17:05 Peter C. Wallace wrote:
On Tue, 12 Mar 2019, linden wrote:
Date: Tue, 12 Mar 2019 09:50:52 -0700
From: linden
To: Peter C. Wallace , andy pugh
Cc: "Enhanced Machine Controller (EMC)"
Subject: Re: mesa 7i76e io
Thanks to Andy and Peter io is working
In the end it was to things not quite right:
- Vin
On Tue, 12 Mar 2019, Gene Heskett wrote:
Date: Tue, 12 Mar 2019 06:12:23 -0400
From: Gene Heskett
Reply-To: "Enhanced Machine Controller (EMC)"
To: emc-users@lists.sourceforge.net
Subject: [Emc-users] More for PCW
Greetings Peter;
The 7i76d has a spindle encoder, so I'm looking for sugge
On Tue, 12 Mar 2019, Linden wrote:
Date: Tue, 12 Mar 2019 01:51:42 -0700
From: Linden
Reply-To: "Enhanced Machine Controller (EMC)"
To: emc-users@lists.sourceforge.net
Subject: [Emc-users] mesa 7i76e io
Hello all
I am not sure if i understand correctly how the D0 work between hal
On Mon, 11 Mar 2019, Gene Heskett wrote:
Date: Mon, 11 Mar 2019 21:55:59 -0400
From: Gene Heskett
Reply-To: "Enhanced Machine Controller (EMC)"
To: emc-users@lists.sourceforge.net
Subject: [Emc-users] until I get chips for C1G, moving everything to the 7i76
For PCW.
I have 100's of 1N914
301 - 400 of 1966 matches
Mail list logo
