On Tue, 25 Oct 2016, Stephen Dubovsky wrote:
> Date: Tue, 25 Oct 2016 14:40:46 -0400
> From: Stephen Dubovsky
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: "Enhanced Machine Controller (EMC)"
> Subject: Re: [Emc-users] following along in my what if musings about ther new
> ora
On Fri, 14 Oct 2016, Erik Friesen wrote:
> Date: Fri, 14 Oct 2016 13:09:53 -0400
> From: Erik Friesen
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: "Enhanced Machine Controller (EMC)"
> Subject: Re: [Emc-users] Linuxcnc on arm
>
> I guess I am not following how a hardware interru
On Thu, 13 Oct 2016, dan...@austin.rr.com wrote:
Date: Thu, 13 Oct 2016 15:39:16 +
From: dan...@austin.rr.com
Reply-To: "Enhanced Machine Controller (EMC)"
To: andy pugh
Cc: "Enhanced Machine Controller (EMC)"
Subject: Re: [Emc-users] Hacking a sim runtime mode
It's not actually a si
On Thu, 13 Oct 2016, dan...@austin.rr.com wrote:
Date: Thu, 13 Oct 2016 14:57:48 +
From: dan...@austin.rr.com
Reply-To: "Enhanced Machine Controller (EMC)"
To: "Enhanced Machine Controller (EMC)"
Subject: Re: [Emc-users] Hacking a sim runtime mode
Well that's what I tried and describe
On Wed, 12 Oct 2016, Erik Friesen wrote:
> Date: Wed, 12 Oct 2016 08:30:06 -0400
> From: Erik Friesen
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: "Enhanced Machine Controller (EMC)"
> Subject: Re: [Emc-users] Haas thoughts
>
> Does or doesn't LCNC support softdmc?
Not LinuxCNC
On Wed, 12 Oct 2016, Marius Alksnys wrote:
> Date: Wed, 12 Oct 2016 14:59:54 +0300
> From: Marius Alksnys
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: emc-users@lists.sourceforge.net
> Subject: Re: [Emc-users] Homing to index ends at different positions
>
> Thank you for your sug
On Wed, 12 Oct 2016, Marius Alksnys wrote:
> Date: Wed, 12 Oct 2016 12:13:16 +0300
> From: Marius Alksnys
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: emc-users@lists.sourceforge.net
> Subject: [Emc-users] Homing to index ends at different positions
>
> LinuxCNC 2.7.7, hostmot2,
On Tue, 11 Oct 2016, Erik Friesen wrote:
Date: Tue, 11 Oct 2016 19:06:33 -0400
From: Erik Friesen
Reply-To: "Enhanced Machine Controller (EMC)"
To: "Enhanced Machine Controller (EMC)"
Subject: Re: [Emc-users] Haas thoughts
So how does the drive know how much pwm to give the motors? Or t
On Tue, 11 Oct 2016, Erik Friesen wrote:
> Date: Tue, 11 Oct 2016 18:24:36 -0400
> From: Erik Friesen
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: Greg Bentzinger ,
> "Enhanced Machine Controller (EMC)"
> Subject: Re: [Emc-users] Haas thoughts
>
> The pinout coming from the
On Sun, 2 Oct 2016, dan...@austin.rr.com wrote:
> Date: Sun, 2 Oct 2016 19:59:37 +
> From: dan...@austin.rr.com
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: emc-users@lists.sourceforge.net
> Subject: [Emc-users] HAL "watchdog" component
>
> I am trying to put this in to watch
>
> Peter C. Wallace:
>
> Do you have a software tool I can use to trace this *$#& BoB pin by pin?.
> The labeling, and the docs that I was sent, do not have enough info to
> clue me as to what pin on the 5i25, would correspond to what circuit it
> feeds. Many thanks if
On Sat, 24 Sep 2016, Pavel G. Kasyanenko wrote:
> Date: Sat, 24 Sep 2016 19:45:25 +1000
> From: Pavel G. Kasyanenko
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: emc-users@lists.sourceforge.net
> Subject: [Emc-users] LinuxCNC and FHA-25C-xx-E250 with 2-wire encoder
>
> Hello!
> D
On Tue, 6 Sep 2016, Gene Heskett wrote:
> Date: Tue, 6 Sep 2016 19:03:23 -0400
> From: Gene Heskett
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: "Enhanced Machine Controller (EMC)"
> Subject: Re: [Emc-users] Need unlocked copy of a pdf for a breakout board I
> just bought two
On Thu, 11 Aug 2016, Rene Hopf wrote:
> Date: Thu, 11 Aug 2016 01:33:31 +0200
> From: Rene Hopf
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: "Enhanced Machine Controller (EMC)"
> Subject: [Emc-users] 7i76e cheat sheet
>
> Much quicker and more obvious than the manual.
Nice, You
On Tue, 19 Jul 2016, John Kasunich wrote:
> Date: Tue, 19 Jul 2016 12:40:21 -0400
> From: John Kasunich
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: emc-users@lists.sourceforge.net
> Subject: Re: [Emc-users] Semi OT: Can't measure Index pulse on encoder
>
>
>
> On Tue, Jul 19, 20
On Wed, 13 Jul 2016, Leonardo Marsaglia wrote:
> Date: Wed, 13 Jul 2016 16:57:38 -0300
> From: Leonardo Marsaglia
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: "Enhanced Machine Controller (EMC)"
> Subject: Re: [Emc-users] Semi OT: Can't measure Index pulse on encoder
>
> Hello J
On Tue, 21 Jun 2016, andy pugh wrote:
Date: Tue, 21 Jun 2016 12:47:17 +0100
From: andy pugh
Reply-To: "Enhanced Machine Controller (EMC)"
To: "Enhanced Machine Controller (EMC)"
Subject: [Emc-users] If you need to run a lot of Mesa Ethernet cards
I wonder how well this would work?
http:/
On Tue, 31 May 2016, Todd Zuercher wrote:
> Date: Tue, 31 May 2016 12:16:00 -0400 (EDT)
> From: Todd Zuercher
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: "Enhanced Machine Controller (EMC)"
> Subject: Re: [Emc-users] Multpile 7i80HD's fr
On Mon, 30 May 2016, Gene Heskett wrote:
> Date: Mon, 30 May 2016 12:47:26 -0400
> From: Gene Heskett
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: emc-users@lists.sourceforge.net
> Subject: Re: [Emc-users] PID tuning 7i92 stepper
>
> On M
On Mon, 30 May 2016, dan...@austin.rr.com wrote:
> Date: Mon, 30 May 2016 7:07:14 +
> From: dan...@austin.rr.com
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: "Enhanced Machine Controller (EMC)"
> Subject: [Emc-users] PID tuning 7i92 stepper
>
> So I never did get to tuning th
On Sat, 28 May 2016, dan...@austin.rr.com wrote:
> Date: Sat, 28 May 2016 20:58:59 +
> From: dan...@austin.rr.com
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: "Enhanced Machine Controller (EMC)"
> Subject: Re: [Emc-users] Copying an installation
>
> Hmm, well, interesting, th
$ grep ' ifname ' /var/log/dmesg
>>> [1.401462] forcedeth :00:08.0: ifname eth0, PHY OUI 0x5043 @ 1,
>>> addr 00:1f:c6:62:fc:bb
>>> [1.929064] forcedeth :00:09.0: ifname eth1, PHY OUI 0x5043 @ 1,
>>> addr 00:1f:c6:63:07:97
>>> (w
On Fri, 27 May 2016, Danny Miller wrote:
> Date: Fri, 27 May 2016 00:11:08 -0500
> From: Danny Miller
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: emc-users@lists.sourceforge.net
> Subject: Re: [Emc-users] Copying an installation
>
> I do recall we went through much more than exp
On Fri, 13 May 2016, Jim Craig wrote:
> Date: Fri, 13 May 2016 09:42:15 -0500
> From: Jim Craig
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: emc-users
> Subject: [Emc-users] Thanks and a question
>
> First of all I want to thank everyone that provided advice on this
> plasma cut
On Fri, 6 May 2016, giorgio foga wrote:
> Date: Fri, 6 May 2016 17:11:29 +0200
> From: giorgio foga
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: Enhanced Machine Controller EMC
> Subject: Re: [Emc-users] Appropriate PCs
>
> Sorry ... my expirience with j1800 is vewry bad ... wo
ngs,
> at 10% of the big motors noise, but no faster.
>
> On Thursday 28 April 2016 19:38:19 Peter C. Wallace wrote:
>
>> On Thu, 28 Apr 2016, Gene Heskett wrote:
>>> Date: Thu, 28 Apr 2016 18:29:04 -0400
>>> From: Gene Heskett
>>> Reply-To: "En
On Thu, 28 Apr 2016, Gene Heskett wrote:
> Date: Thu, 28 Apr 2016 18:29:04 -0400
> From: Gene Heskett
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: "Enhanced Machine Controller (EMC)"
> Subject: [Emc-users] New motor and driver in, runs w/o the springs,
> at 10% of the big mot
On Wed, 20 Apr 2016, fritz wrote:
> Date: Wed, 20 Apr 2016 22:15:49 -0400
> From: fritz
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: "Enhanced Machine Controller (EMC)"
> Subject: [Emc-users] Mesa 5i25/6i25 +7i76 problems with 2.7.4
>
> In the process of upgrading every computer
On Wed, 20 Apr 2016, Gene Heskett wrote:
> Date: Wed, 20 Apr 2016 14:13:38 -0400
> From: Gene Heskett
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: emc-users@lists.sourceforge.net
> Subject: Re: [Emc-users] Question on DM860 stepper drivers
>
> On Wednesday 20 April 2016 11:36:58
On Sun, 17 Apr 2016, Gene Heskett wrote:
> Date: Sun, 17 Apr 2016 20:02:17 -0400
> From: Gene Heskett
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: emc-users@lists.sourceforge.net
> Subject: Re: [Emc-users] g33.1 fine tuning.
>
> On Sunday 17 Ap
On Sun, 17 Apr 2016, Gene Heskett wrote:
> Date: Sun, 17 Apr 2016 18:57:59 -0400
> From: Gene Heskett
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: "Enhanced Machine Controller (EMC)"
> Subject: [Emc-users] g33.1 fine tuning.
>
> Greetings;
>
> I am being plagued with joint 2 fol
On Thu, 14 Apr 2016, Eric H. Johnson wrote:
> Date: Thu, 14 Apr 2016 09:20:01 -0400
> From: Eric H. Johnson
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: "'Enhanced Machine Controller (EMC)'"
> Subject: [Emc-users] Following error on angular axis
>
> All,
>
>
>
> I am trying to l
On Sun, 10 Apr 2016, Ormund Williams wrote:
> Date: Sun, 10 Apr 2016 10:30:15 -0400
> From: Ormund Williams
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: "Enhanced Machine Controller (EMC)"
> Subject: Re: [Emc-users] Replacing Fanuc controller on Johnford VMC-500 mill
>
> On Sat,
On Thu, 7 Apr 2016, Gene Heskett wrote:
> Date: Thu, 7 Apr 2016 13:21:35 -0400
> From: Gene Heskett
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: emc-users@lists.sourceforge.net
> Subject: Re: [Emc-users] Servos and Drives PID Values
>
> On Thursday 07 April 2016 12:43:41 sam soko
On Wed, 6 Apr 2016, Marshland Engineering wrote:
> Date: Wed, 6 Apr 2016 20:53:54 +1200
> From: Marshland Engineering
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: emc-users@lists.sourceforge.net
> Subject: [Emc-users] Servos and Drives PID Values
>
> I finally have my mill table
On Fri, 25 Mar 2016, Sebastian Kuzminsky wrote:
> Date: Fri, 25 Mar 2016 13:35:46 -0600
> From: Sebastian Kuzminsky
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: "Enhanced Machine Controller (EMC)"
> Subject: Re: [Emc-users] Encoder failure
>
> On 03/25/2016 01:26 PM, Nicklas Kar
On Wed, 16 Mar 2016, John Dammeyer wrote:
> Date: Wed, 16 Mar 2016 09:24:33 -0700
> From: John Dammeyer
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: "'Enhanced Machine Controller (EMC)'"
> Subject: Re: [Emc-users] Linuxcnc on arm
>
> As I understand it, the MachineKit was forked
On Thu, 18 Feb 2016, Viesturs L?cis wrote:
> Date: Thu, 18 Feb 2016 23:01:37 +0200
> From: "[UTF-8] Viesturs L?cis"
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: "Enhanced Machine Controller (EMC)"
> Subject: [Emc-users] Mesa 5i25 firmware - is there a mistake?
>
> Hello!
>
> I a
On Mon, 8 Feb 2016, Bertho Stultiens wrote:
> Date: Mon, 8 Feb 2016 21:03:44 +0100
> From: Bertho Stultiens
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: "Enhanced Machine Controller (EMC)"
> Subject: Re: [Emc-users] Modbus wiring
>
> On 02/08/2016 08:52 PM, Nicklas Karlsson wrot
On Tue, 2 Feb 2016, Rafael wrote:
> Date: Tue, 2 Feb 2016 12:08:59 -0800
> From: Rafael
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: "Enhanced Machine Controller (EMC)"
> Subject: Re: [Emc-users] Prempt RT on Linux Mint
>LinuxCNC and similar products need to run and be supported
On Tue, 2 Feb 2016, Nicklas Karlsson wrote:
> Date: Tue, 2 Feb 2016 22:27:59 +0100
> From: Nicklas Karlsson
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: "Enhanced Machine Controller (EMC)"
> Subject: Re: [Emc-users] Prempt RT --> RTAI, Xenomai, delay
>
>> ...
>> That's because N
On Tue, 2 Feb 2016, Marius Alksnys wrote:
> Date: Tue, 2 Feb 2016 21:08:26 +0200
> From: Marius Alksnys
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: emc-users@lists.sourceforge.net
> Subject: Re: [Emc-users] 7i43 encoder count failures
>
> Is't there some checksum used?
>
Not on
6 08:49 PM, Peter C. Wallace ra:
Sounds like errors in the EPP connection. I would try shortening the
EPP cable to the minimum length (If you are using a flat cable) or
if you need a longer cable, use a IEEE-1284 compatible cable
and a very short flat cable adapter to the 7I43s header. Might
On Tue, 2 Feb 2016, Marius Alksnys wrote:
> Date: Tue, 2 Feb 2016 20:40:21 +0200
> From: Marius Alksnys
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: emc-users@lists.sourceforge.net
> Subject: [Emc-users] 7i43 encoder count failures
>
> Today I catched the fault which was causing
On Fri, 29 Jan 2016, Chris Kelley wrote:
> Date: Fri, 29 Jan 2016 21:18:54 -0600
> From: Chris Kelley
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: "Enhanced Machine Controller (EMC)"
> Subject: [Emc-users] Firmware for Mesa 5i20+7i39+7i33TA+Opto22
>
> Greetings all,
>
> I recent
On Sat, 23 Jan 2016, Marius Alksnys wrote:
> Date: Sat, 23 Jan 2016 00:56:30 +0200
> From: Marius Alksnys
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: emc-users@lists.sourceforge.net
> Subject: [Emc-users] Mesa 7i77: is it possible to control DRV4 enable
> separately?
>
> I u
On Tue, 19 Jan 2016, TJoseph Powderly wrote:
> Date: Tue, 19 Jan 2016 07:45:02 -0800
> From: TJoseph Powderly
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: "Enhanced Machine Controller (EMC)"
> Subject: [Emc-users] very low speed motion
>
> i was reading the step/servo thread
> .
On Thu, 14 Jan 2016, Jeff Epler wrote:
> Date: Thu, 14 Jan 2016 16:00:55 -0600
> From: Jeff Epler
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: "Enhanced Machine Controller (EMC)"
> Subject: Re: [Emc-users] Xenomai, machinekit
>
> linuxcnc.org has no xenomai kernel support in its
On Fri, 1 Jan 2016, andy pugh wrote:
> Date: Fri, 1 Jan 2016 16:59:12 +
> From: andy pugh
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: "Enhanced Machine Controller (EMC)"
> Subject: Re: [Emc-users] Smart-Serial cabling
>
> On 1 Ja
On Thu, 31 Dec 2015, Gene Heskett wrote:
> Date: Thu, 31 Dec 2015 20:51:08 -0500
> From: Gene Heskett
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: "emc-users@lists.sourceforge.net"
> Subject: [Emc-users] To Peter C Wallace
>
> I tr
On Fri, 1 Jan 2016, Bertho Stultiens wrote:
> Date: Fri, 1 Jan 2016 14:55:47 +0100
> From: Bertho Stultiens
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: "Enhanced Machine Controller (EMC)"
> Subject: Re: [Emc-users] Smart-Serial cabling
>
> On 01/01/2016 12:23 PM, andy pugh wrot
On Tue, 22 Dec 2015, Jon Elson wrote:
> Date: Tue, 22 Dec 2015 12:15:19 -0600
> From: Jon Elson
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: "Enhanced Machine Controller (EMC)"
> Subject: Re: [Emc-users] BIOSTAR J1900MH2 Ver. 6.x
>
> On 12/22/2015 11:14 AM, Jim Craig wrote:
>> D
I am using standard Mesa cable, but can make shorter one, about
400mm length.
The skew setting HAL pin is only exposed with version 4 encoder counters
12/22/2015 05:41 AM, Peter C. Wallace ra:
...
Did you try turning off the encoder filter bit?
The limitation is because the 7I77 encoders are
On Tue, 22 Dec 2015, Marius Alksnys wrote:
> Date: Tue, 22 Dec 2015 05:06:43 +0200
> From: Marius Alksnys
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: emc-users@lists.sourceforge.net
> Subject: [Emc-users] Mesa 7i77 encoder max count rate
>
> In my current linuxcnc, 5i25 and 7i77
er on the RX
UART input ) and will add this to all bitfiles containing sserial firmware
but currently I have new bitfiles for the 5I25/6I25 and 7I76 and 7I77 here:
http://freeby.mesanet.com/filtered.zip
>
> On Sun, Dec 20, 2015 at 1:34 PM, Peter C. Wallace wrote:
>
>>
>&g
On Sun, 20 Dec 2015, John Thornton wrote:
> Date: Sun, 20 Dec 2015 12:26:51 -0600
> From: John Thornton
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: "Enhanced Machine Controller (EMC)"
> Subject: Re: [Emc-users] Grounding Issues
>
> I have a line reactor for the VFD but I've nev
On Sat, 12 Dec 2015, John Alexander Stewart wrote:
> Date: Sat, 12 Dec 2015 13:46:58 -0500
> From: John Alexander Stewart
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: "Enhanced Machine Controller (EMC)"
> Subject: Re: [Emc-users] Z axis stepper gradually losing position
>
> I ha
On Fri, 11 Dec 2015, Tomas Jarmolaitis wrote:
> Date: Fri, 11 Dec 2015 23:17:59 +0200
> From: Tomas Jarmolaitis
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: "Enhanced Machine Controller (EMC)"
> Subject: Re: [Emc-users] Z axis stepper gradually losing position
>
>> it takes some
On Wed, 9 Dec 2015, Todd Zuercher wrote:
> Date: Wed, 9 Dec 2015 16:21:22 -0500 (EST)
> From: Todd Zuercher
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: "Enhanced Machine Controller (EMC)"
> Subject: Re: [Emc-users] linuxcnc 2.7.3 - mesa
On Tue, 8 Dec 2015, Todd Zuercher wrote:
> Date: Tue, 8 Dec 2015 21:29:34 -0500 (EST)
> From: Todd Zuercher
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: "Enhanced Machine Controller (EMC)"
> Subject: Re: [Emc-users] linuxcnc 2.7.3 - mesa
OK those are all incoming extra character errors, most likely from noise
induced in the DB25 cable (possibly from a ground loop or possibly from
magnetic coupling to nearby noisy power lines)
It must be that they are ignored in 2.6.x (they are not harmful and I dont see
any timeouts or CRC err
uys have been terribly busy
> lately.
in a terminal:
sudo dmesg -C (this clears the log)
(start linuxcnc, wait for sserial error)
dmesg > log.txt
and then include log.txt in a email or post it somewhere
>
> - Original Message -
> From: "Peter C. Wallace"
On Tue, 8 Dec 2015, Todd Zuercher wrote:
> Date: Tue, 8 Dec 2015 10:42:24 -0500 (EST)
> From: Todd Zuercher
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: "Enhanced Machine Controller (EMC)"
> Subject: Re: [Emc-users] linuxcnc 2.7.3 - mesa
On Mon, 7 Dec 2015, Mark Johnsen wrote:
Date: Mon, 7 Dec 2015 21:46:11 -0800
From: Mark Johnsen
Reply-To: "Enhanced Machine Controller (EMC)"
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] linuxcnc 2.7.3 - mesa 7i77 update
Stephen,
Can you post a link to the entire dmesg l
On Wed, 21 Oct 2015, Bengt Sj?lund wrote:
> Date: Wed, 21 Oct 2015 22:39:00 +0200
> From: "[UTF-8] Bengt Sj?lund"
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: Emc-users@lists.sourceforge.net
> Subject: [Emc-users] 7i90HD + 7i48
>
> Next questions,
>
> How do I setup my Mesa Board
day 12 October 2015 16:10:47 Peter C. Wallace wrote:
>
>> On Mon, 12 Oct 2015, Gene Heskett wrote:
>>> Date: Mon, 12 Oct 2015 15:56:07 -0400
>>> From: Gene Heskett
>>> Reply-To: "Enhanced Machine Controller (EMC)"
>>>
>>>
On Mon, 12 Oct 2015, Gene Heskett wrote:
> Date: Mon, 12 Oct 2015 15:56:07 -0400
> From: Gene Heskett
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: "Enhanced Machine Controller (EMC)"
> Subject: [Emc-users] To PCW: retuning for inches
>
> Greetings Peter;
>
> In getting a decent
On Mon, 12 Oct 2015, Claude Zervas wrote:
> Date: Mon, 12 Oct 2015 08:57:40 -0700
> From: Claude Zervas
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: "Enhanced Machine Controller (EMC)"
> Subject: Re: [Emc-users] Rookie question - what to get to run LinCNC
> easily/inexpensive
On Mon, 12 Oct 2015, Claude Zervas wrote:
> Date: Mon, 12 Oct 2015 08:57:40 -0700
> From: Claude Zervas
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: "Enhanced Machine Controller (EMC)"
> Subject: Re: [Emc-users] Rookie question - what to get to run LinCNC
> easily/inexpensive
On Mon, 12 Oct 2015, Karlsson & Wang wrote:
> Date: Mon, 12 Oct 2015 00:04:31 +0200
> From: Karlsson & Wang
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: emc-users@lists.sourceforge.net
> Subject: [Emc-users] Hostmot2 (Use two cards)
>
> I am trying to use two ethernet cards at th
On Tue, 6 Oct 2015, Gene Heskett wrote:
> The above settings seem to have brought it under control, but one
> question, 2 actually, remain.
>
> 1. MAX_OUTPUT was set for 32.5 by PNCconf, but looking at it with a
> halmeter it appeared to be setting a restriction on how much "catchup"
> was availab
On Tue, 6 Oct 2015, Gene Heskett wrote:
> Date: Tue, 6 Oct 2015 16:44:41 -0400
> From: Gene Heskett
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: emc-users@lists.sourceforge.net
> Subject: [Emc-users] joint following errors by the kiloton
>
> Greetings all;
>
> I gave up on that c
On Sun, 4 Oct 2015, Mark Johnsen wrote:
> Date: Sun, 4 Oct 2015 01:47:52 -0700
> From: Mark Johnsen
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: emc-users@lists.sourceforge.net
> Subject: [Emc-users] Upgrade to 2.7 Mesa 5i25/7i77 firmware
>
> Hi,
>
> My upgrade to 2.7 is "still i
On Sat, 19 Sep 2015, Karlsson & Wang wrote:
> Date: Sat, 19 Sep 2015 09:46:41 +0200
> From: Karlsson & Wang
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: emc-users@lists.sourceforge.net
> Subject: [Emc-users] Ethernet Hostmot2 (drop packets at init)
>
> I am using the hostmot2 dri
On Fri, 11 Sep 2015, andy pugh wrote:
> Date: Fri, 11 Sep 2015 22:18:28 +0100
> From: andy pugh
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: "Enhanced Machine Controller (EMC)"
> Subject: Re: [Emc-users] trying to get out of the freezer
>
> On 11 September 2015 at 22:08, Michael
On Thu, 10 Sep 2015, Tom Easterday wrote:
Date: Thu, 10 Sep 2015 12:07:31 -0400
From: Tom Easterday
Reply-To: "Enhanced Machine Controller (EMC)"
To: "Enhanced Machine Controller (EMC)"
Subject: Re: [Emc-users] G33 and motion-spindle-speed-in,
motion-spindle-revs (2.7.0-pre7)
I also
On Thu, 10 Sep 2015, Tom Easterday wrote:
Date: Thu, 10 Sep 2015 10:07:59 -0400
From: Tom Easterday
Reply-To: "Enhanced Machine Controller (EMC)"
To: "Enhanced Machine Controller (EMC)"
Subject: Re: [Emc-users] G33 and motion-spindle-speed-in,
motion-spindle-revs (2.7.0-pre7)
The enc
at
> startup.
>>
>> Peter - thank you for these utilities, and for your constant emails/posts.
>> I did find
>> the 5i25 update on the linuxcnc forum, which helped considerably.
>>
>> :-)
>>
>> John.
>>
>>
>>
>> On
On Sat, 5 Sep 2015, John Alexander Stewart wrote:
> Date: Sat, 5 Sep 2015 11:37:08 -0400
> From: John Alexander Stewart
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: "Enhanced Machine Controller (EMC)"
> Subject: [Emc-users] Mesa software out of date error?
>
> Hi all;
>
> After
On Thu, 27 Aug 2015, sam sokolik wrote:
Date: Thu, 27 Aug 2015 13:26:24 -0500
From: sam sokolik
Reply-To: "Enhanced Machine Controller (EMC)"
To: "Enhanced Machine Controller (EMC)"
Subject: Re: [Emc-users] No stepgens in 5i25
did you physically power cycle the machine? on-off-on?
sam
On Tue, 11 Aug 2015, andy pugh wrote:
> Date: Tue, 11 Aug 2015 01:07:31 +0100
> From: andy pugh
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: "d...@calypsoventures.com" ,
> "Enhanced Machine Controller (EMC)"
> Subject: Re: [Emc-users] Min spindle encoder resolution for mill r
gt;> here:
>> http://git.linuxcnc.org/gitweb?p=linuxcnc.git;a=blob;f=configs/sim/axi
>> s/vismach/VMC_toolchange/spindle.hal;h=867a593045fc6a20a227b08173f632ec
>> 583db328;hb=3a6ab378e8c5d6759914e08f61cd28e6bd526e3d
>
> To Peter C. Wallace: All this brings up a need for an
On Tue, 21 Jul 2015, Curtis Dutton wrote:
> Date: Tue, 21 Jul 2015 06:14:46 -0400
> From: Curtis Dutton
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: "Enhanced Machine Controller (EMC)"
> Subject: [Emc-users] 7i64 suddenly missing
>
> I have a 5i25 running with 2 7i85s cards. I a
On Tue, 14 Jul 2015, Chris Kelley wrote:
> Date: Tue, 14 Jul 2015 09:48:00 -0500
> From: Chris Kelley
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: "Enhanced Machine Controller (EMC)"
> Subject: [Emc-users] Okuma Absolute Encoder
>
> I'm getting ready to start retrofitting a 1981
On Tue, 7 Jul 2015, Gene Heskett wrote:
> Date: Tue, 7 Jul 2015 11:22:00 -0400
> From: Gene Heskett
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: emc-users@lists.sourceforge.net
> Subject: Re: [Emc-users] Motherboard?
>
> On Tuesday 07 July 20
On Tue, 7 Jul 2015, andy pugh wrote:
> Date: Tue, 7 Jul 2015 16:15:14 +0100
> From: andy pugh
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: "Enhanced Machine Controller (EMC)"
> Subject: Re: [Emc-users] Motherboard?
>
> On 7 July 2015
On Tue, 7 Jul 2015, andy pugh wrote:
> Date: Tue, 7 Jul 2015 16:02:19 +0100
> From: andy pugh
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: "Enhanced Machine Controller (EMC)"
> Subject: Re: [Emc-users] Motherboard?
>
> On 7 July 2015 at 15:09, Dave Cole wrote:
>> The F1 version
On Tue, 7 Jul 2015, Dave Cole wrote:
> Date: Tue, 07 Jul 2015 10:09:50 -0400
> From: Dave Cole
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: "Enhanced Machine Controller (EMC)"
> Subject: Re: [Emc-users] Motherboard?
>
> On 7/7/2015 9:48 AM, andy pugh wrote:
>> On 7 July 2015 at
On Sun, 5 Jul 2015, Marius Liebenberg wrote:
> Date: Sun, 05 Jul 2015 15:33:11 +
> From: Marius Liebenberg
> To: "Enhanced Machine Controller (EMC)"
> Subject: Re: [Emc-users] Index pulse on 5i25 with 7i76
>
>
>> On Sun, 5 Jul 2015, Marius Liebenberg wrote:
>>
>>> Date: Sun, 05 Jul 2015 11:
On Sun, 5 Jul 2015, Marius Liebenberg wrote:
> Date: Sun, 05 Jul 2015 11:28:07 +
> From: Marius Liebenberg
> To: "Enhanced Machine Controller (EMC)"
> Subject: [Emc-users] Index pulse on 5i25 with 7i76
>
> I have the above installed on my lathe and I am having problems with
> getting thread
-users] More progress
> SNIP--------
> Peter C Wallace, is there a way we could make a fixed duty cycle of 50%
> in the 5i25 while allowing the variable frequency we need?
For testing you can do this by selecting the stepgens quadrature output
mode (but you have no direction signal s
On Wed, 1 Jul 2015, Gene Heskett wrote:
>
> Apparently not, if no bitfile has been written, its an error.
>
> But now it does work, thanks.
>
> IO Connections for P3
> Pin# I/O Pri. funcSec. func Chan Pin funcPin
> Dir
>
> 1 0 IOPort None
> 14 1 IOPort
On Tue, 30 Jun 2015, Gene Heskett wrote:
> Date: Tue, 30 Jun 2015 23:26:15 -0400
> From: Gene Heskett
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: emc-users@lists.sourceforge.net
> Subject: Re: [Emc-users] flashing with mesaflash?
>
> On Tue
On Tue, 30 Jun 2015, Drew Rogge wrote:
> Date: Tue, 30 Jun 2015 18:38:43 -0700
> From: Drew Rogge
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: "Enhanced Machine Controller (EMC)"
> Subject: Re: [Emc-users] flashing with mesaflash?
>
> The bit file is what gets written to the boa
On Tue, 30 Jun 2015, Gene Heskett wrote:
> Date: Tue, 30 Jun 2015 21:32:48 -0400
> From: Gene Heskett
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: "Enhanced Machine Controller (EMC)"
> Subject: [Emc-users] flashing with mesaflash?
>
> I have installed these file from 5i25.zip, i
On Thu, 4 Jun 2015, Ron Bean wrote:
> Date: Thu, 4 Jun 2015 10:13:54 -0400
> From: Ron Bean
> To: "Enhanced Machine Controller (EMC)"
> Subject: Re: [Emc-users] Sandy box
>
>> If you need one computer to see the GUI and one for realtime
>> effects, why not just start out with a real computer an
On Thu, 14 May 2015, Karlsson & Wang wrote:
Date: Thu, 14 May 2015 21:53:05 +0200
From: Karlsson & Wang
Reply-To: "Enhanced Machine Controller (EMC)"
To: "Enhanced Machine Controller (EMC)"
Subject: Re: [Emc-users] If there's one thing I hate, all the noise, noise,
noise, noise
I gue
On Mon, 11 May 2015, Rick Lair wrote:
> Date: Mon, 11 May 2015 11:14:30 -0400
> From: Rick Lair
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: "Enhanced Machine Controller (EMC)"
> Subject: Re: [Emc-users] Servo Motor Question
>
>
>
On Mon, 11 May 2015, Rick Lair wrote:
> Date: Mon, 11 May 2015 10:53:40 -0400
> From: Rick Lair
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: Emc Users
> Subject: [Emc-users] Servo Motor Question
>
> A little off topic, but I figured this would be the best place to ask,
>
> On on
On Fri, 8 May 2015, Marius Liebenberg wrote:
> Date: Fri, 08 May 2015 09:00:19 +
> From: Marius Liebenberg
> To: "Enhanced Machine Controller (EMC)"
> Subject: [Emc-users] Laser and mesa
>
> I am busy with a large laser machine ( 3200 x 2100 ) bed size and I want
> to use some Mesa cards to
601 - 700 of 1966 matches
Mail list logo