Hi Sven.
Can you send a picture of the machine you have to retrofit ?
Is it an injection moulding machine ?
If yes how many tons is the closing clamp force and how many heating zones
have the injection barrel/chamber ?
Regards.
Alex
On Tue, Sep 15, 2015 at 11:41 PM, John Thornton
On Monday 21 September 2015 11:08:50 andy pugh wrote:
> On 21 September 2015 at 15:45, Gene Heskett wrote:
> > Is there a quick & dirty but adequate way to extend the 2 most
> > common carbide bit sizes in my collection in order to gain clearance
> > between the workpiece and
On Monday 21 September 2015 11:19:46 Cristian Bontas wrote:
> Hello
>
> Have a look here for the sizes of the ER nuts (there are several
> versions).
>
> http://www.aliexpress.com/store/product/ER-chuck-nut-ER-collet-nut-ER-
>nut-ER11-50-type-A-M-UM/506241_528850800.html
Nice link Cristian,
On Monday 21 September 2015 10:45:52 Gene Heskett wrote:
> Greetings everybody;
>
> Thinking in electronic ink here...
>
> Is there a quick & dirty but adequate way to extend the 2 most common
> carbide bit sizes in my collection in order to gain clearance between
> the workpiece and its holding
> > > I think your suggestion with the HAL/Arduino library will be the cheapest
> > > possible and more than good for this application, I will try it for sure!
> > > With some small tweaks it will be fine for a Mega board and I should have
> > > enough I/O.
> > > Thanks!
> > >
> > > /S
Profibus
Gentlemen,
be careful with Profibus, there are different tastes of it. Especially
the one designed for building automation will not very well suit our
needs. But, certainly, this is highly professional technology, extremely
noise proof even at long distances of several hundred meters.
Peter
Am
On Monday 21 September 2015 10:57:04 Jim Craig wrote:
> On 9/21/2015 9:45 AM, Gene Heskett wrote:
> > Greetings everybody;
> >
> > Thinking in electronic ink here...
> >
> > Is there a quick & dirty but adequate way to extend the 2 most
> > common carbide bit sizes in my collection in order to
Does anyone know what became of this discussion in 2012?
http://comments.gmane.org/gmane.linux.distributions.emc.user/39104
Was there an G71 implementation done based on remapping?
Thanks,
-Tom
--
On Monday 21 September 2015 11:02:40 Rick Lair wrote:
> All I have to say is, is that I hope like hell that I have half the
> amount of ambition that you have Gene, 48 years from now, when I am
> your age.
>
>
> Rick
That makes you 32, Rick. Too late for a back of ear drying towel & still
too
Greetings everybody;
Thinking in electronic ink here...
Is there a quick & dirty but adequate way to extend the 2 most common
carbide bit sizes in my collection in order to gain clearance between
the workpiece and its holding jigs? Something like an ER8 that I can
plug into an R8 maybe?
What
Hello
Have a look here for the sizes of the ER nuts (there are several versions).
http://www.aliexpress.com/store/product/ER-chuck-nut-ER-collet-nut-ER-nut-ER11-50-type-A-M-UM/506241_528850800.html
For ER 20 (the smallest that can take a 1/2'' tool shank), the minimum
diameter would be 28 mm,
All I have to say is, is that I hope like hell that I have half the
amount of ambition that you have Gene, 48 years from now, when I am your
age.
Rick
On 9/21/2015 10:57 AM, Jim Craig wrote:
> On 9/21/2015 9:45 AM, Gene Heskett wrote:
>> Greetings everybody;
>>
>> Thinking in electronic
> Gentlemen,
> be careful with Profibus, there are different tastes of it. Especially
> the one designed for building automation will not very well suit our
> needs. But, certainly, this is highly professional technology, extremely
> noise proof even at long distances of several hundred meters.
On 21 September 2015 at 15:45, Gene Heskett wrote:
> Is there a quick & dirty but adequate way to extend the 2 most common
> carbide bit sizes in my collection in order to gain clearance between
> the workpiece and its holding jigs?
Does this link work?
On 9/21/2015 9:45 AM, Gene Heskett wrote:
> Greetings everybody;
>
> Thinking in electronic ink here...
>
> Is there a quick & dirty but adequate way to extend the 2 most common
> carbide bit sizes in my collection in order to gain clearance between
> the workpiece and its holding jigs? Something
I have used a lot of Profibus devices. I used to work for Siemens.
Profibus is very robust if installed properly.DP is the norm for
remote I/O.
PA is designed for the process industry and not nearly as common.
I always thought that a chip was needed for a DP master.I don't
think a DP
> I have used a lot of Profibus devices. I used to work for Siemens.
> Profibus is very robust if installed properly.DP is the norm for
> remote I/O.
> PA is designed for the process industry and not nearly as common.
>
> I always thought that a chip was needed for a DP master.I don't
>
Well, you can eliminate windows completely, if you have a phone or android
tablet.
https://play.google.com/store/apps/details?id=io.machinekit.appdiscover=en
I would argue that the ability to split the GUI from the engine is a good
thing overall, but at your core, you're still looking at having
I saw this today, and with all of the talk about interfacing LinuxCNC
to an Arduino, I thought I would pass along the following links. Maybe
somebody will find them useful.
Arduino Industrial controller: https://industruino.com/
Price list: https://industruino.com/shop
--
MC
19 matches
Mail list logo