Hi
i found that this and many other companies manufacture 3D printer
http://indimension3.com/our-3d-printers
They also manufacture head that attached to basically 3d CNC 3 axis mill.
So, question is why not just manufacture head as a another tool to CNC mill
on the CAT 40 or CAT 50 tool holder?
in
(EMC)
Subject: Re: [Emc-users] next big thing
On 3 February 2014 00:50, a k pccncmach...@gmail.com wrote:
So, question is why not just manufacture head as a another tool to CNC
mill
on the CAT 40 or CAT 50 tool holder?
It ought to work, but the typical 3D printer moves a lot faster than
.
.
Example - pattern shop that manufacture pattern for cast iron foundry - 10
inch - and up will be interesting for such inexpensive solution for their
pattern needs.
On Sun, Feb 2, 2014 at 5:45 PM, Gene Heskett ghesk...@wdtv.com wrote:
On Sunday 02 February 2014 20:19:04 a k
holder can hold it. Of course if it was a popular design you would think
that the market would be flooded with cheap Chinlee versions.
JT
On 2/3/2014 2:21 AM, Gregg Eshelman wrote:
On 2/2/2014 5:50 PM, a k wrote:
Hi
i found that this and many other companies manufacture 3D printer
http
hi
i want to build deposition head for regular cnc mill to transfer mill into
reprap .
to make cnc mill faster in rep rap deposition, head will have 2 axis.
if cnc mill has 3 axis xyz and deposition head will have 2 more axis A and B
so whole machine - reprap unit total axis 5.
on my machine i use
On Wed, Feb 26, 2014 at 1:28 AM, andy pugh bodge...@gmail.com wrote:
On 26 February 2014 06:11, a k pccncmach...@gmail.com wrote:
my question is can i use on one system 3 ac servomotors and 2 stepper
motors?
Yes, there is absolutely no reason why not.
(Your extra axes would conventionally
Hello
i like when google see what i am searching and sending me new videos - on
youtube (google)
few weeks ago youtube bring this video
https://www.youtube.com/watch?v=s9IdZ2pI5dA
now my idea is use instead laser - regular electro welding TIG MIG.
attach to spindle welding handle - program
hi
resend this 2nd times because 24 hours is not enough to my e-mail show up
why?
is this only my e-mails? can not see same problem with regular gmail
something wrong with emc2 mailing
//
Hello
i like when google
of machine
it was in 2005 -2007 and it work so use same to control feed with with
electric welding
thanks
aram
On Thu, May 1, 2014 at 12:15 PM, Gene Heskett ghesk...@wdtv.com wrote:
On Thursday 01 May 2014 15:11:10 a k did opine:
You are sending thru gmail. You will not see an echo, to gmail its
Hi
i am building cnc plasma table.
it is CNC gantry type machine with plasma head.
I want to ask about Jasic Air Plasma machine.
how you start stop plasma - ?
because i need to it be controlled with CNC controller
Did anyone used Jasic Air Plasma machine with CNC - EMC2 controller?
thank you
hi
Viesturs
who is distribute in USA Jasic or similar plasma cutters?
Do you have contact number?
Is Jasic plasma durable - working good?
thank you
aram
On Fri, May 2, 2014 at 5:07 AM, Viesturs Lācis viesturs.la...@gmail.comwrote:
2014-05-02 11:54 GMT+03:00 a k pccncmach...@gmail.com:
I
Hi
i am looking for help to i can control feed on emc2 with external power
DC 0 +5V.
What i have?
I have EMC2 based system- mesa 5i20 and 7i33.
it is 3 axis system.
how to do that?
2 direction
1. 7 i33 card has 4 output for 4 axis.
i use only 3, so output for one axis is not in use.
i wan to
hi
idea is to use 0 +5v to control/change feed in emc2
0v = 0 feed
5v = 100% feed
aram
On Mon, May 12, 2014 at 4:28 AM, andy pugh bodge...@gmail.com wrote:
On 12 May 2014 02:00, a k pccncmach...@gmail.com wrote:
Hi
i am looking for help to i can control feed on emc2 with external power
to limit
current.
Le 12/05/2014 19:47, andy pugh a écrit :
On 12 May 2014 18:27, a k pccncmach...@gmail.com wrote:
hi
idea is to use 0 +5v to control/change feed in emc2
0v = 0 feed
5v = 100% feed
In that case you need to find a way to get 0-5V into LinuxCNC, then
connect
wrote:
On 12 May 2014 18:27, a k pccncmach...@gmail.com wrote:
hi
idea is to use 0 +5v to control/change feed in emc2
0v = 0 feed
5v = 100% feed
In that case you need to find a way to get 0-5V into LinuxCNC, then
connect that to the motion.adaptive-feed pin (and issue the M52
command
hi
with Arduino Nano i can use USB to access EMC2 and control feed?
is this right?
thanks
aram
On Mon, May 12, 2014 at 3:12 PM, andy pugh bodge...@gmail.com wrote:
On 12 May 2014 21:46, a k pccncmach...@gmail.com wrote:
Can i use USB to go directly into EMC2 architect and control feed
I can see that USB is not good idea to use.
what will be better more reliable way control feed with external 0+ 5 V?
On Tue, May 13, 2014 at 11:24 AM, andy pugh bodge...@gmail.com wrote:
On 13 May 2014 19:13, Marius Liebenberg mar...@mastercut.co.za wrote:
You would count up until the
direction is use USB i am right?
i search on e-bay for Arduino
and found many things
http://www.ebay.com/sch/i.html?_trksid=p2047675.m570.l1313.TR12.TRC2.A0.H0_nkw=Arduino_sacat=0_from=R40
/
which one do i need or better go to Messa electronics?
i bought some boards before from messa electronics
is THCAD-10 will work for my project?
On Tue, May 13, 2014 at 1:21 PM, andy pugh bodge...@gmail.com wrote:
On 13 May 2014 20:36, a k pccncmach...@gmail.com wrote:
i do not have expertise in electronics so i relay on experts.
An Arduino
with THCAD-10 0v equal to 100khz and 5v equal to 1mhz
then needed set converter in emc2
is this right?
On Tue, May 13, 2014 at 1:40 PM, a k pccncmach...@gmail.com wrote:
i bought some boards before from messa electronics
is THCAD-10 will work for my project?
On Tue, May 13, 2014 at 1:21
Hi
about
that link
http://www.ebay.com/itm/12mm-Rotary-Encoder-Switch-Flat-Top-Knob-NEW-/201087207672?pt=LH_DefaultDomain_0hash=item2ed1bb48f8
it show encoders.
we talk about board THCAD-10 to convert 0 =5 V into signal that will be
connected to A signal of encoder on emc2.
why do i need encoder?
% feed
how do that i will think after i can assemble machine where 0 +5V will
control feed.
On Wed, May 14, 2014 at 12:49 PM, andy pugh bodge...@gmail.com wrote:
On 14 May 2014 20:00, a k pccncmach...@gmail.com wrote:
we talk about board THCAD-10 to convert 0 =5 V into signal
%/
On Fri, May 16, 2014 at 12:12 AM, yann jautard brico...@free.fr wrote:
so you want LCNC to output a 0-5v signal to control welding current
according to feed rate,
or you want feed to change according to welding current rate ?
Le 14/05/2014 23:06, a k a écrit :
Hi
right now i want
, May 16, 2014 at 12:43 AM, a k pccncmach...@gmail.com wrote:
feed to change according to welding current rate
i think need put some logic - as default feed 100% or what ever set
manually on monitor, when current 0 amp.
when current go to 50% everything same way.
when current pass 50% and up
, a k pccncmach...@gmail.com wrote:
where i can find this part on my computer?
How did you create the original configuration? You only need to make
some very small changes to your existing HAL file.
--
atp
If you can't fix it, you don't own it.
http://www.ifixit.com/Manifesto
v to control feed and only that what i am
interesting.
On Sat, May 17, 2014 at 2:07 PM, Jon Elson el...@pico-systems.com wrote:
On 05/17/2014 03:32 PM, a k wrote:
About ---original configuration
in 2008 i was on CNC work shop at cardinal engineering.
i took disk that was available
Sorry Jon
it was bad day for me
really sorry
On Sat, May 17, 2014 at 2:07 PM, Jon Elson el...@pico-systems.com wrote:
On 05/17/2014 03:32 PM, a k wrote:
About ---original configuration
in 2008 i was on CNC work shop at cardinal engineering.
i took disk that was available at work shop
computer?
what change do i need do?
On Sun, May 18, 2014 at 1:04 AM, andy pugh bodge...@gmail.com wrote:
On 17 May 2014 22:32, a k pccncmach...@gmail.com wrote:
those CD disk was mark --- emc2.24 8.04 2008
many people from the list know what on those disk better than i do.
i load those
I think that Steve was right about -written in Martian.
Yes I did read Integrators Manual first time in 2006 but I never saw
implementation – take this part – change to this and you will get this –
and this is working.
I remember Ray Henry show something at work shop but than time I was busy
hi
i start to loading
---Ubuntu 10.04 Lucid Lynx and LinuxCNC (current release)---
thanks
aram
On Tue, May 20, 2014 at 3:25 PM, andy pugh bodge...@gmail.com wrote:
On 20 May 2014 23:17, andy pugh bodge...@gmail.com wrote:
You _might_ be able to use a software encoder connected to the
Hi
i download, burn cd and install
Ubuntu 10.04 Lucid Lynx and LinuxCNC (current release)
and it is not working
it shows
print file information
debug information
kernel messages
where do i need to look for problem?
thank you
aram
.
On Wed, May 21, 2014 at 3:33 PM, andy pugh bodge...@gmail.com wrote:
On 21 May 2014 21:42, a k pccncmach...@gmail.com wrote:
where do i need to look for problem?
Your existing config used the hal_m5i20 driver, which no longer exists.
You should make a backup copy of your existing config
:~$
On Thu, May 22, 2014 at 2:45 AM, andy pugh bodge...@gmail.com wrote:
On 22 May 2014 09:18, a k pccncmach...@gmail.com wrote:
when i try to start emc2 it show error
What error does it show? I almost guarantee that the error states that
the hal_m5i20 component can not be found.
http
).
[11380.619168] I-pipe: Domain RTAI unregistered.
[11380.619240] RTAI[hal]: unmounted.
On Thu, May 22, 2014 at 10:58 AM, a k pccncmach...@gmail.com wrote:
hi
this is error that i got when i start in terminals
To run a command as administrator (user root), use sudo command.
See man
at 11:17 AM, Viesturs Lācis
viesturs.la...@gmail.comwrote:
2014-05-22 21:06 GMT+03:00 a k pccncmach...@gmail.com:
[11380.125103] hm2_5i20.0: firmware: requesting hm2/5i20/SVST8_4.BIT
[11380.127460] hm2_5i20.0: FPGA did not reset: /INIT = 1, DONE = 1
[11380.127470] hm2/hm2_5i20.0: failed
who is PCW?
On Thu, May 22, 2014 at 11:18 AM, andy pugh bodge...@gmail.com wrote:
On 22 May 2014 19:06, a k pccncmach...@gmail.com wrote:
[11380.125103] hm2_5i20.0: firmware: requesting hm2/5i20/SVST8_4.BIT
[11380.127460] hm2_5i20.0: FPGA did not reset: /INIT = 1, DONE = 1
OK, so you
i think i know
On Thu, May 22, 2014 at 11:29 AM, a k pccncmach...@gmail.com wrote:
who is PCW?
On Thu, May 22, 2014 at 11:18 AM, andy pugh bodge...@gmail.com wrote:
On 22 May 2014 19:06, a k pccncmach...@gmail.com wrote:
[11380.125103] hm2_5i20.0: firmware: requesting hm2/5i20/SVST8_4
what should i do now?
there was reason that i like emc2.2
On Thu, May 22, 2014 at 12:15 PM, Peter C. Wallace p...@mesanet.com wrote:
On Thu, 22 May 2014, a k wrote:
Date: Thu, 22 May 2014 11:32:08 -0700
From: a k pccncmach...@gmail.com
Reply-To: Enhanced Machine Controller (EMC
now - garbage?
i have 2 of them!
On Thu, May 22, 2014 at 2:23 PM, a k pccncmach...@gmail.com wrote:
what should i do now?
there was reason that i like emc2.2
On Thu, May 22, 2014 at 12:15 PM, Peter C. Wallace p...@mesanet.comwrote:
On Thu, 22 May 2014, a k wrote:
Date: Thu, 22 May 2014
23, 2014 at 5:54 AM, Peter C. Wallace p...@mesanet.com wrote:
On Fri, 23 May 2014, a k wrote:
Date: Fri, 23 May 2014 04:16:59 -0700
From: a k pccncmach...@gmail.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc
i did run emc2.2 live cd and put ini file back
it work for 2 min and start give join following error0.
what is difference between joint following error 0 from joint following
error 1 and joint following error 2
thanks
aram
On Fri, May 23, 2014 at 11:37 AM, a k pccncmach...@gmail.com wrote:
hi
existing pid numbers with no
luck. After retuning the numbers were not even close.
Terry
On May 23, 2014, at 5:12 PM, Peter C. Wallace p...@mesanet.com wrote:
On Fri, 23 May 2014, a k wrote:
Date: Fri, 23 May 2014 14:45:06 -0700
From: a k pccncmach...@gmail.com
Reply-To: Enhanced
reducer.
so with emc2 one can not use motor with encoder 8192 pulse
is this right?
On Fri, May 23, 2014 at 3:12 PM, Peter C. Wallace p...@mesanet.com wrote:
On Fri, 23 May 2014, a k wrote:
Date: Fri, 23 May 2014 14:45:06 -0700
From: a k pccncmach...@gmail.com
Reply-To: Enhanced Machine
dac-scale previously?
in calibration window i try input_scale 8192x4x5=163840
On Sat, May 24, 2014 at 5:23 PM, andy pugh bodge...@gmail.com wrote:
On 25 May 2014 00:24, a k pccncmach...@gmail.com wrote:
i want to be sure that my ac servo motor (with 8192 pulse) tune able at
all
output-scale=1.0
and
max out put =1.0
i did not change it in 2.2 and now in 2.5
do i need change output scale to === ?
On Sat, May 24, 2014 at 5:37 PM, andy pugh bodge...@gmail.com wrote:
On 25 May 2014 01:33, a k pccncmach...@gmail.com wrote:
dac-scale previously?
in calibration window
, I am talking about the output scale. As in,
the scaling between PID output and volts at the drive.
that is in ini file?
On Sat, May 24, 2014 at 6:05 PM, andy pugh bodge...@gmail.com wrote:
On 25 May 2014 01:46, a k pccncmach...@gmail.com wrote:
output-scale=1.0
and
max out put =1.0
scale factor must be 163840 because it is simple arithmetic
8192x4x5= 163840
is this right?
On Sat, May 24, 2014 at 7:17 PM, Peter C. Wallace p...@mesanet.com wrote:
On Sat, 24 May 2014, a k wrote:
Date: Sat, 24 May 2014 18:55:57 -0700
From: a k pccncmach...@gmail.com
Reply-To: Enhanced
it call
input_Scale =163840
it this right?
On Sat, May 24, 2014 at 7:38 PM, a k pccncmach...@gmail.com wrote:
scale factor must be 163840 because it is simple arithmetic
8192x4x5= 163840
is this right?
On Sat, May 24, 2014 at 7:17 PM, Peter C. Wallace p...@mesanet.com wrote:
On Sat, 24
i can jog machine with 0.1 increment with P =8 i=0 d=0
now i want to make hal scop to work to i can set i and d.
slowly but i am moving.
thanks for all help!
On Sat, May 24, 2014 at 8:38 PM, Peter C. Wallace p...@mesanet.com wrote:
On Sat, 24 May 2014, a k wrote:
Date: Sat, 24 May 2014 19
in 2.2 i remember in hal scope need to open 2 channel
pid.0.error
( 0 - for 1st x axis)
another channel was Xoutput 0 now this name change.
is this renamed into axis.0.amp-enable-out ?
On Sat, May 24, 2014 at 8:47 PM, a k pccncmach...@gmail.com wrote:
i can jog machine with 0.1 increment
hi
about tuning
when graph looks like triangle instead trapezoid that means that need to
increase P ?
not enough power to fast to increase speed and not enough power to fast to
stop rotation
is this right?
On Sat, May 24, 2014 at 9:47 PM, a k pccncmach...@gmail.com wrote:
in 2.2 i remember
back and updated from 2.3 to 2.5. and made no
changes to the machine and tried to use my existing pid numbers with no
luck. After retuning the numbers were not even close.
Terry
On May 23, 2014, at 5:12 PM, Peter C. Wallace p...@mesanet.com wrote:
On Fri, 23 May 2014, a k wrote:
Date
.
i did chenge ff1 =0.03% ff2=px0.005%
is this sounds normal result?
On Sun, May 25, 2014 at 2:53 PM, a k pccncmach...@gmail.com wrote:
I can guarantee that the scaling is different between m5i20 and hostmot .
I replace a computer a while back and updated from 2.3 to 2.5. and made
and after slowly turn cw by
them self
it is not totally new thing with this motor
what cause that?
thanks
aram
On Mon, May 26, 2014 at 12:14 PM, a k pccncmach...@gmail.com wrote:
strange changes between emc2 2.2.5 and 2.5 in area tune up of motors.
in 2.2.5 i run on p=220 i=.65 d=0.03
now in 2.5 i
1. Use differential signaling (make sure the encoder -- drive and drive
-- 7I33 are set up for differential mode)
Hi
how can i do that ?
which file ? any instruction?
thank you
On Wed, May 28, 2014 at 8:18 AM, Peter C. Wallace p...@mesanet.com wrote:
On Tue, 27 May 2014, a k wrote:
Date
2014 17:59, a k pccncmach...@gmail.com wrote:
which file ? any instruction?
http://www.mesanet.com/pdf/motion/7i33man.pdf
Page 2
--
atp
If you can't fix it, you don't own it.
http://www.ifixit.com/Manifesto
Hi
in ini file i think that as default setting for this parameters
Ferror=1
min error=0.002
and FF1=1
am i right or no?
i am not sure about tune up only with P FF1 and FF2.
http://gnipsel.com/linuxcnc/tuning/servo.html
it did not work out in my case
On Wed, May 28, 2014 at 12:08 PM, a k
---
///
question
did system check and found it by them self?
does this effect tuning of motor ?
on x and z axis i have similar motor and y has sem motor- did system check
and found something or it is coincidence?
On Wed, May 28, 2014 at 2:26 PM, a k pccncmach...@gmail.com wrote:
Hi
in ini file i
i did increase min error from 0.002 to 0.008 and now no noise machine
sounds really good.
how much i lost geometric accuracy by increasing --min error --?
i want to compare theoretical lost of accuracy with real measurement.
On Thu, May 29, 2014 at 11:35 AM, a k pccncmach...@gmail.com wrote
Hi
In linuxCNCconfigs hm2-servo5i20.ini
file each axis has
MIN_FERROR=0.002
i replace 0,002 with 0,008 - made some trade off and as a result machine
works very good now.
On Fri, May 30, 2014 at 4:11 PM, andy pugh bodge...@gmail.com wrote:
On 30 May 2014 21:58, a k pccncmach...@gmail.com
hi
i want to say about technology that available now and which can be used.
i went 3 times to linuxcnc fest at cardinal engineering.
it was in 2005-2006-2007
i learned not everything but enough to build working 3 axis mill
i think 3 day fest to me is to short time to generate question and absorb
el...@pico-systems.com wrote:
On 05/31/2014 04:00 PM, a k wrote:
about skype -- it is bad. because skype works only on windows 8
Hmmm? I've used Skype on Linux for quite some time. I have
also seen
it work on Win 2K and XP.
Jon
in same directory
linuxCNCconfigs hm2-servo
i found only one folder that indicate hal
hm2-servo.hal
and there i could not find anything like MIN_FERROR
i have emc2 ---2.5---
On Sat, May 31, 2014 at 2:49 PM, andy pugh bodge...@gmail.com wrote:
On 31 May 2014 21:30, a k pccncmach...@gmail.com
install the stand alone desktop version on any of the Windows
platforms. I dont use the Windows 8 integrated Skype. I installed the
desktop version and that works very well.
On 2014-05-31 23:54, a k wrote:
yes i used skype on XP (i have XP) 2 month ago.
after that it give error and say need
On Wed, May 21, 2014 at 1:17 AM, a k pccncmach...@gmail.com wrote:
hi
i start to loading
---Ubuntu 10.04 Lucid Lynx and LinuxCNC (current release)---
thanks
aram
On Tue, May 20, 2014 at 3:25 PM, andy pugh bodge...@gmail.com wrote:
On 20 May 2014 23:17, andy pugh bodge...@gmail.com wrote
-servo.hal?
thank you
//
thank you
On Mon, Jun 2, 2014 at 3:45 AM, andy pugh bodge...@gmail.com wrote:
On 2 June 2014 00:53, a k pccncmach...@gmail.com wrote:
this is axis that i add and i think that line that need to be replaced
one
of 10-11-12-13-14
Adding
?
i have variable resister 0.5W , will it be enough or i need 1 Watt 2W etc?
thank you
On Mon, Jun 2, 2014 at 1:43 PM, andy pugh bodge...@gmail.com wrote:
On 2 June 2014 21:03, a k pccncmach...@gmail.com wrote:
need change it to
[HOSTMOT2]
CONFIG=firmware=hm2/5i20/SVST8_4.BIT
want to supply power to board THCAD-10
On Tue, Jun 3, 2014 at 12:53 PM, Bas de Bruijn bdebru...@luminize.nl
wrote:
On 3 jun. 2014, at 20:16, a k pccncmach...@gmail.com wrote:
hi
do i need build this power supply
http://www.learningaboutelectronics.com/Articles/How-to-connect
i will use THCAD to control feed and i need to have external power supply
to see how feed will change with changing voltage - from 0 to 5V dc
On Tue, Jun 3, 2014 at 1:21 PM, Peter C. Wallace p...@mesanet.com wrote:
On Tue, 3 Jun 2014, a k wrote:
Date: Tue, 3 Jun 2014 11:16:22 -0700
From
-in-a-circuit
thanks
On Tue, Jun 3, 2014 at 2:28 PM, andy pugh bodge...@gmail.com wrote:
On 3 June 2014 21:38, a k pccncmach...@gmail.com wrote:
i will use THCAD to control feed and i need to have external power supply
to see how feed will change with changing voltage - from 0 to 5V dc
...@gmail.com wrote:
On 4 June 2014 08:21, a k pccncmach...@gmail.com wrote:
i need to know Amp that needs to use THCAD
It is in the THCAD manual. But PCW has already said that you can run
the THCAD directly from the encoder 5V supply on the 7ii33. You don't
need a power supply.
THCAD pin 1
AM, a k pccncmach...@gmail.com wrote:
hi
i did check pin 40 gnd and 43 vcc with voltmeter and i could not find +5V
power - any power
i did check +5V from power supply to see if voltmeter works
my cnc mill working everything is good but why i could not detect +5V from
pins 40 and 43
, Jun 6, 2014 at 3:09 AM, andy pugh bodge...@gmail.com wrote:
On 6 June 2014 10:02, a k pccncmach...@gmail.com wrote:
i did check +5V from power supply to see if voltmeter works
my cnc mill working everything is good but why i could not detect +5V
from
pins 40 and 43?
Maybe you
change voltage from 0 to 5 change encoder velocity to 20% ( from 0.78 to
0.79)
with this range of 20% how i can change feed from 0-150%?
On Sat, Jun 7, 2014 at 6:43 PM, a k pccncmach...@gmail.com wrote:
Hello
I did connect everything.
Card THCAD power ON i can see 1 led light
with scale 100 range chage from 970 to 1220
On Sat, Jun 7, 2014 at 7:02 PM, andy pugh bodge...@gmail.com wrote:
On 8 June 2014 02:43, a k pccncmach...@gmail.com wrote:
--Then (if you are using Axis) Machine - Halmeter and look at the pin
-called hm2_5i20.0.encoder.03.velocity and you
no it was 0.97 and 0.78
but with scale 100 numbers are 1220. and 970.- ( potentiometer from 0VDC to
5VDC)
On Sat, Jun 7, 2014 at 7:11 PM, andy pugh bodge...@gmail.com wrote:
On 8 June 2014 03:05, a k pccncmach...@gmail.com wrote:
change voltage from 0 to 5 change encoder velocity to 20
hm2_5i20.0.encoder.03.velocity scale.0.in
net scaled-percent scale.0.out ...
On Sat, Jun 7, 2014 at 7:18 PM, andy pugh bodge...@gmail.com wrote:
On 8 June 2014 03:10, a k pccncmach...@gmail.com wrote:
with scale 100 range chage from 970 to 1220
loadrt scale
...
addf scale.0 servo-thread
.
...
I did put voltmeter on output from potertiometer and on max it was 5.03VDC
On Sat, Jun 7, 2014 at 7:50 PM, andy pugh bodge...@gmail.com wrote:
On 8 June 2014 03:34, a k pccncmach...@gmail.com wrote
i did check with voltmeter again voltage on power into TCHCAD and it
4.89 to 4.88
this is from USB power
is this ok?
On Sat, Jun 7, 2014 at 8:12 PM, a k pccncmach...@gmail.com wrote:
this potentiometer just to set system.
to see if it all working.
my target is:
0+5 V will control feed from
or 3 or 4 or 5 or anything between those figures
--V DC with potentiometer. Maximum reading of voltage from potentiometer
is 5 V DC.
/
On Sun, Jun 8, 2014 at 3:17 AM, andy pugh bodge...@gmail.com wrote:
On 8 June 2014 04:21, a k pccncmach...@gmail.com wrote
time. all based on gmail.com
On Sun, Jun 8, 2014 at 12:06 PM, andy pugh bodge...@gmail.com wrote:
On 8 June 2014 19:20, a k pccncmach...@gmail.com wrote:
Yes, i can make 1 V DC 2 or 3 or 4 or 5 or anything between those
figures
--V DC with potentiometer. Maximum reading of voltage from
] Feed control
On 8 June 2014 19:20, a k pccncmach...@gmail.com wrote:
Yes, i can make 1 V DC 2 or 3 or 4 or 5 or anything between those
figures
--V DC with potentiometer. Maximum reading of voltage from
potentiometer
is 5 V DC.
And 0V input gives 1220 for encoder.03.velocity
I would check the input connections (P2)--
what looks wrong - out of range?
what number?
what should i look
what is it --(P2)- input voltage from potentiometer?
On Sun, Jun 8, 2014 at 9:15 PM, Peter C. Wallace p...@mesanet.com wrote:
On Sun, 8 Jun 2014, a k wrote:
Date: Sun, 8 Jun 2014
i just switched two wires that go from TCHCAD to 7i33 and result is the same
5V - 970.
0V--1220
That is all that i can do
right?
On Sun, Jun 8, 2014 at 9:37 PM, Peter C. Wallace p...@mesanet.com wrote:
On Sun, 8 Jun 2014, a k wrote:
Date: Sun, 8 Jun 2014 21:27:59 -0700
From: a k
I check integrator manual part for manual for tuning and want to recommend
before any tuning set in ini file -max acceleration and max speed to
lowest level.
because if max acceleration is too high than system may don not have power
to accelerate fast enough and result will be error of all type.
good now?
On Mon, Jun 9, 2014 at 6:14 AM, Peter C. Wallace p...@mesanet.com wrote:
On Sun, 8 Jun 2014, a k wrote:
Date: Sun, 8 Jun 2014 22:34:28 -0700
From: a k pccncmach...@gmail.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine
Because feed control on axis start from 0% to 150%
i want to 0VDC be 0% feed and
5VDC correspond to 150% of feed
can i have that?
On Mon, Jun 9, 2014 at 11:32 AM, andy pugh bodge...@gmail.com wrote:
On 9 June 2014 19:27, a k pccncmach...@gmail.com wrote:
0VDC===1200-1220
5VDC===5549
...
//
is this in same direction -related?
On Mon, Jun 9, 2014 at 12:08 PM, andy pugh bodge...@gmail.com wrote:
On 9 June 2014 19:42, a k pccncmach...@gmail.com wrote:
Because feed control on axis start from 0% to 150%
i want to 0VDC be 0% feed and
5VDC correspond to 150% of feed
'scale.0.gain' not found
Shutting down and cleaning up LinuxCNC...
Cleanup done
/
so
i need put in pin
On Mon, Jun 9, 2014 at 12:08 PM, andy pugh bodge...@gmail.com wrote:
On 9 June 2014 19:42, a k pccncmach...@gmail.com wrote:
Because feed control on axis start from 0
.
On Mon, Jun 9, 2014 at 2:01 PM, Peter C. Wallace p...@mesanet.com wrote:
On Mon, 9 Jun 2014, a k wrote:
Date: Mon, 9 Jun 2014 13:52:55 -0700
From: a k pccncmach...@gmail.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller
, a k wrote:
i did add this file also
have error
...
Debug file information:
...
hm2-servo.hal:205: Can't find module 'scale=1' in
/usr/realtime-2.6.32-122-rtai/modules/linuxcnc
That's your error ^^
You made a typo in your hal file.
--
Sebastian Kuzminsky
10, 2014 at 11:25 AM, andy pugh bodge...@gmail.com wrote:
On 10 June 2014 19:17, a k pccncmach...@gmail.com wrote:
Do you actually bother reading any of the error reports?
HAL: ERROR: function 'scale' not found
There is the error.
The manpage:
http://www.linuxcnc.org/docs/html/man/man9
neet it?
On Tue, Jun 10, 2014 at 1:44 PM, Viesturs Lācis viesturs.la...@gmail.com
wrote:
2014-06-10 21:17 GMT+03:00 a k pccncmach...@gmail.com:
hm2-servo.hal:206: addf failed
This thread has been around for more than a week and basically is not
moving forward, because lots of different
own doctor.
you can save a lot medical expense. if doctor can do so you can do also.
a lo of logic in and common sense in it.
On Tue, Jun 10, 2014 at 1:44 PM, Viesturs Lācis viesturs.la...@gmail.com
wrote:
2014-06-10 21:17 GMT+03:00 a k pccncmach...@gmail.com:
hm2-servo.hal:206: addf failed
:38 a k did opine
And Gene did reply:
Basically I have a small dictionary (link to HAL) and I need to write
– very good poetry – story and without mistakes – otherwise it
– program will not work.
If one can read dictionary and grammar book than he can write poetry/
story/novel
your grey cells etc.
On Wed, Jun 11, 2014 at 1:33 AM, Viesturs Lācis viesturs.la...@gmail.com
wrote:
2014-06-11 11:00 GMT+03:00 a k pccncmach...@gmail.com:
I said - if you help me - it does not give you permission call me stupid
-
brainless -- use your grey cells etc.
Be human
and are obviously frustrated.
Dave
On 6/11/2014 5:45 AM, a k wrote:
about
//
why would anyone reply to your questions after you have
shown such an ignorance to their attempt to help?
///
i do not ignore any one.
i did
look in what converted so call help?
On Wed, Jun 11, 2014 at 11:26 AM, Bas de Bruijn bdebru...@luminize.nl
wrote:
On 11 jun. 2014, at 20:11, a k pccncmach...@gmail.com wrote:
People have rights to stop responding. that is their rights. no problem
there.
again and again - *people have
11, 2014 at 11:49 AM, a k pccncmach...@gmail.com wrote:
///
I think you should control your anger.
Never seen anybody calling you stupid or brainless. Neither seen anybody
being disrespectful to you.
you free to take any position.
everyone can read and see who can
i remember there was motion board manufacturer MONTEC and i remember it
was for 5 axis per board
are they still in business?
is was similar to mesa 5i20
i remember on emc2 2,2.5 was option for montec
--
HPCC Systems Open
1 - 100 of 363 matches
Mail list logo
