Re: [EVDL] Regen and Smart Cruise Control

l EV's don't. > >> Do all EV have a regen d >> isable switch? > > No - the Tesla does not have a switch to disable regen. Hybrids, like > the Prius also do not have the ability. > > corbin > >> Which EVs only use release of accelerator method? Does regen

Re: [EVDL] Adapting L1 to 14-50 receptacle

Chris -- next part -- An HTML attachment was scrubbed... URL: <http://lists.evdl.org/private.cgi/ev-evdl.org/attachments/20170228/232e4d19/attachment.htm> ___ UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub http://li

Re: [EVDL] Regen and Smart Cruise Control

n amount is limited, when the battery > is fully charged or cold. > >> Do all EV have a regen disabled light? > > All EV's don't. > >> Do all EV have a regen d >> isable switch? > > No - the Tesla does not have a switch to disable regen. Hybrids, lik

Re: [EVDL] Adapting L1 to 14-50 receptacle

Chris Tromley wrote: > So here's my question. A 14-50 has a neutral, so I'm pretty sure I can > adapt my brick to it by simply tapping one leg of the 240 V. Is there > anything subtle that I'm missing? Like if there are a bunch of these > outlets fed by a single panel and I pull 3 kW off one

Re: [EVDL] Smart cruise control

On 28 Feb 2017 at 11:13, Jim Walls via EV wrote: > Are you TRYING to get almost every driver on the road to hate you and create a > road hazard for everyone else? Not everywhere in the world or nation are drivers as impatient and stressed as they are in California. People are actually somewhat

Re: [EVDL] Regen and Smart Cruise Control

, like the Prius also do not have the ability. corbin > Which EVs only use release of accelerator method? Does regen adaptive based on similar trips? The questions are numerous. > > -- next part -- > An HTML attachment was scrubbed... > URL: <http

Re: [EVDL] Silicon heat sink grease

Here's a tip from my woodworking knowledge - if you use sandpaper, even wet/dry, to achieve a smooth finish make sure that you don't skip a grit number, it makes the surface harder to actually get smoother. Here's a graphic http://www.briwax-trg.com/How to Use Briwax/Sanding Before Using

[EVDL] Adapting L1 to 14-50 receptacle

-- An HTML attachment was scrubbed... URL: <http://lists.evdl.org/private.cgi/ev-evdl.org/attachments/20170228/232e4d19/attachment.htm> ___ UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub http://lists.evdl.org/listinfo.cgi/ev-evdl.or

Re: [EVDL] Silicon heat sink grease

>Robert sez Silver Ice 710 ... is manufactured by Timtronics in Yaphank NY 631-345-6509< - (I found: ) http://www.timtronics.com/contact.htm (page has a form to send an email, or use their direct detail below) General Information Request To request a printed catalog or a call back from a

Re: [EVDL] Regen and Smart Cruise Control

; > No - the Tesla does not have a switch to disable regen. Hybrids, like the > Prius also do not have the ability. Neither does the BoltEV. > > corbin Ed > >> Which EVs only use release of accelerator method? Does regen adaptive based >> on similar trips? The questions are numerous. &

Re: [EVDL] Silicon heat sink grease

forum for discussing the > current state of the art and future direction of electric vehicles > (EVs). We define an EV as a ... > > >> EV -- Electric Vehicle Discussion List - lists.evdl.org ... >> <http://lists.evdl.org/listinfo.cgi/ev-evdl.org> > EV -- Electric Vehic

Re: [EVDL] Regen and Smart Cruise Control

ilar trips? The questions are numerous. > > -- next part -- > An HTML attachment was scrubbed... > URL: <http://lists.evdl.org/private.cgi/ev-evdl.org/attachments/20170228/15bb b0e2/attachment.htm> > ___ > UNSUBSCRIBE: h

Re: [EVDL] EV Digest, Vol 52, Issue 35

in the slow lane isn't going to hurt anyone except idiots that want to use the slow lane as a racetrack.  Lawrence Rhodes     -- next part -- An HTML attachment was scrubbed... URL: <http://lists.evdl.org/private.cgi/ev-evdl.org/attachments/2

Re: [EVDL] Silicon heat sink grease

At 01:08 AM 2/28/2017, EVDL Administrator via EV wrote: On 27 Feb 2017 at 20:16, Jay Summet via EV wrote: > My plan was to hit it with a bit of sand paper just before connecting. Again, I'm not an expert, but I think I remember reading that sandpaper isn't so good for this. It roughens the

Re: [EVDL] Smart cruise control

Are you TRYING to get almost every driver on the road to hate you and create a road hazard for everyone else? Jim Original Message > From: "Lawrence Harris via EV" > Sent: Monday, February 27, 2017 1:53 PM > To: "Lawrence Rhodes"

[EVDL] w/ an up/downhill min/max speed: Smart cruise control

Way too many years ago (1990's), I poured money into upgrades for the S-10 Blazer conversion EV I had (see https://brucedp.neocities.org/blazer/ ). The now retired San Mateo converter installed a small simple circuit that helped maintain a constant battery current draw. I was lucky to get one as

Re: [EVDL] Regen and Smart Cruise Control

sed > on similar trips? The questions are numerous. > > -- next part -- > An HTML attachment was scrubbed... > URL: > <http://lists.evdl.org/private.cgi/ev-evdl.org/attachments/20170228/15bbb0e2/attachment.htm> > __

Re: [EVDL] Silicon heat sink grease

EVDL Administrator via EV wrote: My plan was to hit it with a bit of sand paper just before connecting. Again, I'm not an expert, but I think I remember reading that sandpaper isn't so good for this. It roughens the surfaces, and that actually reduces the heat transfer. Someone correct me if

Re: [EVDL] Smart cruise control

Actually, I think that would be a dumb cruise control because it would vary vehicle speed widely in order to maintain energy/mile in a pre-selected range, resulting in the scenario that Lee described and angering other drivers. It may work fine on almost level ground, but be a real pita to other

Re: [EVDL] Silicon heat sink grease

I sent a query to loctite via their website asking for precut TO-220 / TO-247 Silverstrate pads. But if a paste like material has better conductivity I'll probably just go with that. I wasn't able to find an easy way to order the Silver Ice 710 online, I may have to just call the

Re: [EVDL] Silicon heat sink grease

On 02/28/2017 04:08 AM, EVDL Administrator via EV wrote: On 27 Feb 2017 at 16:55, Mark Hanson via EV wrote: Heat sink grease should be NON conductive electrically but thermally conductive white grease. Though I'm far from an expert (EE dropout here), this makes sense to me. Mainly you want

[EVDL] EVLN: EV-newswire posts for 20170228

his message in context: http://electric-vehicle-discussion-list.413529.n4.nabble.com/EVLN-EV-newswire-posts-for-20170228-tp4685973.html Sent from the Electric Vehicle Discussion List mailing list archive at Nabble.com. ___ UNSUBSCRIBE: http://www.ev

Re: [EVDL] Silicon heat sink grease

On 27 Feb 2017 at 16:55, Mark Hanson via EV wrote: > Heat sink grease should be NON conductive electrically but thermally > conductive white grease. Though I'm far from an expert (EE dropout here), this makes sense to me. Mainly you want just a thin film of heatsink grease. It fills the voids

Re: [EVDL] Silicon heat sink grease

On 27 Feb 2017 at 20:16, Jay Summet via EV wrote: > My plan was to hit it with a bit of sand paper just before connecting. Again, I'm not an expert, but I think I remember reading that sandpaper isn't so good for this. It roughens the surfaces, and that actually reduces the heat transfer.

Re: [EVDL] Silicon heat sink grease

VDL EV News Archive - Electric Vehicle Discussion List<http://evdl.org/evln/> evdl.org EVLN - EV News Archive Edited by Bruce {EVangel} Parmenter: EVLN: home | help | archive | news | privacy policy | terms of service > evdl.org > EVLN - EV News Archive Edited by Bruce {EVangel} Pa