Using the smp installed kernel on Mandrake 7.2 on my dual
Celeron BP6, after running for 1 to 10 minutes, the computer
just stops functioning. The display freezes, the mouse
cursor will not respond to the mouse movements, the
keyboard gets no response and a ping from across the network
gets no
After installing 7.2 I decided to retrieve my data from my bzip
fileonly problem was that I always got an error regarding data
corruption from bzip.
Thinking this was rather odd I tried even changing the kernel back to
what I used with 7.1 thinking something odd must be with 7.2This
Actually Charles I have. I later found out that I could not uncompress
bzip or rar files if they managed to get over about 20meg. This got very
depressing and I reinstalled 7.1 to make sure there was/is no problems.
7.1 worked flawlessly! I reinstalled 7.2 a number of times and in the
end went to
Rolf Ronning a écrit :
My LM7.2 runs extremely slow when I use KDE. the terminal window takes about
12sec to start up, and my filebrowser takes about 24sec.
My HW configuration is P3@580MHz and 128MB RAM and a 7200RPM IDE IBM disk
Matrox g400 32mb (LM only finds 16mb though).
My
Hello.
I'v installed KDE2 and was surprised when I saw
keyboards layouts menu. A lot of people spent days on
internationalisation but keyboards layouts are similar
to XFree86 settings. So turkish people for example
must effort on "teaching" KDE to use tr_q keyboard for
example.
How we can
Ron Stodden wrote:
eric wrote:
Is that in ftp session? they are not work when I try to download a whole
directory ,
i.e.
RPMS
base
mdkinst
The various ftp applications have nothing to do with using rsync,
wget, or fmirror - they are all much better alternatives to ftp
I just installed LM 7.2 with KDE 2 on my server, using XFree 4.01.
It's running a single Pentium III with a Serverworks chipset.
The kernel was compile for SMP.
Like you, it randomly hangs if I do some graphical manipulation.
Switched to XFree 3.3.6, with a uniprocessor kernel,
and haven't had
eric a écrit :
I also tried
wget ftp.twoguys.org/pub/linux/distributions/mandrake/7.2/i586/Mandrake Mandrake
fmirror ftp.twoguys.org/pub/linux/distributions/mandrake/7.2/i586/Mandrake
Mandrake
they all not work
so how should I get that directory in ftp site to my local directory?
I was just going to send a mail on this but now you did...:-)
I've been using KDE for a long time on SuSE and Caldera mostly, now I decided
to test Mandrake mainly because it's the only dist having KDE2 (and because
I'm going to have a course in Linux OS for newbies for a computer company
Rolf Ronning a écrit :
KDE 1 result
/dev/hda:
Timing buffer-cache reads: 128 MB in 1.32 seconds = 96.97 MB/sec
Timing buffered disk reads: 64 MB in 14.53 seconds = 4.40 MB/sec
KDE 2 result
/dev/hda:
Timing buffer-cache reads: 128 MB in 1.47 seconds = 87.07 MB/sec
Timing
On Fri, Nov 10, 2000 at 08:42:07AM -0700, Charles Curley wrote:
On Fri, Nov 10, 2000 at 10:13:57AM -0500, Woojin Lee wrote:
Hi, all..
ld.so package in Mandrake 7.2 doesn't include libdl.so.1, and
I have apps that are looking for libdl.so.1..
Until 7.1, it used to be part of ld.so
I found my problem. I just got mail from my @home provider that they just
majorly upgraded the mail server and had a hardware failure. I suppose if
linux-mandrake sees my address as defunct after a few days of trying to send
the mail, I just get wiped off the list and have to re-up as I did. All
Hi list,
I've been trying desperately to get an HP Colorado T4000s SCSI tape drive
to work with Mandrake for months and just can't get it going. When I
attempt to mount a tape using Kdat I get the 'ole message "no tape in
device." The system knows the drive is there; Mandrakes "new
hardware"
what is mandrake corporate server edition, somebody prove?
Maximo Monsalvo
Guspamar S.A
Responsable Sistemas
Keep in touch with http://mandrakeforum.com:
Subscribe the "[EMAIL PROTECTED]" mailing list.
Go to Edit, Preferences in Kdat and enter you tape drive name. Mine is /dev/tape.
FYI, your tape drive will whir the tape everytime the SCSI bus is reset and everytime
you insert a tape. A SCSI reset happens when you boot up. This doesn't mean that the
OS is doing anything, it's a hardware
Thanks Bill, but it still says that there isn't a tape in the device. Thats what has
got be perplexed.
From: "Bill Shirley" [EMAIL PROTECTED]
Date: Sat, 11 Nov 2000 10:30:09 -0500
To: [EMAIL PROTECTED]
Subject: RE: [expert] SCSI tape drive -- what's the secret? :(
Go to Edit, Preferences in
Which bios version do you have? Are you overclocking?
-- Stephen
On Sat, 11 November 2000, Tom Berkley wrote:
Using the smp installed kernel on Mandrake 7.2 on my dual
Celeron BP6, after running for 1 to 10 minutes, the computer
just stops functioning. The display freezes, the mouse
On Fri, 10 Nov 2000, you wrote:
This could be the reason X crashes (having changed the display card).
Most people would suggest adding a level 3 boot option before you do
this, so you can run (XFDrake|Xconfigurator|XF86Setup). XFdrake will
also let you know if xfs is running.
X doesn't
What does
cat /proc/scsi/scsi
say?
And then, what device are you using for the tape drive?
mt -f /dev/stx status
should give some feedback too, where "x" is the
device number, ie: 0,1 etc.
Stew Benedict
The power in technology lies in getting it to
work the way you do,
I'm able to get an xdmcp connection now, but I am still having
trouble running a remote X session with 7.2.
When I connect, I get the login panel. If I use kde, the starting
dialog runs, but then I'm left with a blank desktop. If I choose
gnome, windows come up, but the window manager is
try rsync, wget, fmirror
I will check into those. I have been using WGET, and it works, but my main beef is
that it seems to recreate the entire source directory tree at my destination, even if
I specify the destination. Tried a bunch of switches, and couldn't get it NOT do do
that.
Try this :
mirrordir -v --no-chown --exclude-glob ".in.*" \
ftp://ftp.ciril.fr/pub/linux/mandrake-devel/cooker/ \
/mnt/linux2/
(change the last directory to your own destination).
FWIW, I just tried this. It seems to put the files in the right place, but I'm still
getting all sorts of
This might be a little off-topic, but perhaps someone has
dealt with this here. I'm still trying to get the new
proxified apache mod_perl set up to work.
First, since I have perl scripts in various places, I changed
this:
IfDefine PERLPROXIED
ProxyPass /perl/
mirrordir *isn't* broken. It's designed to do exactly what it says, create a
mirror. That means it recreates the directory structure exactly as it is on
the source machine, under the specified target directory (in your case /tmp).
It may not be what you want, but that's what it's supposed to
Hello
I was wondering whether someone has managed to compile Nautilus preview
2 on 7.2.
I've got stuck on the first step: compiling oaf-0.6.0.
Many thanks
Eduardo
Keep in touch with http://mandrakeforum.com:
Subscribe the "[EMAIL PROTECTED]" mailing list.
Hello
I have installed vmware 2.0.3 under Mandrake 7.2. Unfortunately things
went as I though they would be:
1) NO DGA modes even after checking, rechecking if the line omit dga is
commented out on XF86Config. Is there anything else I can do?
2) The parallel zip stops working as soon as
7.2 appears to simply reboot for no reason sometimes. I have had it
rebott when attempting to compile programs manually. Is this a flook or
is anyone else experiencing this behavior?
--
| d a v i d @ m i h m
| dmihm @ swbell.net
| webmaster @ afterstep.org
| ftpmaster @
I don't have any problems with uniprocessor on XFree 4.01,
just smp mode and I think that its related to the sound
module. When I recompile the 2.2.17-24 kernel with the
sblive sound driver and no sound modules then the smp kernel
works ok. Its only with the sound modules that the problem
occurs.
You need irqtune. You can set the serial ports to a higher IRQ priority than the
disks.
Bill
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Tommiy Rant
Sent: Saturday, November 11, 2000 4:08 AM
To: [EMAIL PROTECTED]
Subject: Re: [expert] 7.2
I'm using the NJ bios and yes I am overclocking the Celerons
at 550. But that's not the issue. The 2.2.17 kernel.org
source code compiled on my system for smp runs just fine.
It's the mandrake 7.2 (and the redhat 7.0) kernel sources
that cause the problem.
Tom Berkley
stephen boulet wrote:
I'm wondering if the 2.2.17-21mdk kernel in mandrake 7.2 supports the
promise ultra100 card. I'm planning on getting a HD and one of these
controllers to run it and would like to be able to install mdk 7.2 on it
fresh out of the box if I could. I've seen support for the Promise ultra33
and 66
This 7.2 release is looking more and more like a coaster!
The iso was downloaded from one of the mirrors listed off the Mandrake
download page.
--
| d a v i d @ m i h m
| dmihm @ swbell.net
| webmaster @ afterstep.org
| ftpmaster @ afterstep.org
| dmihm @ rchitecture.com
--
7.2 is listed to have
# rpm -qa | grep gcc-2
gcc-2.95.2-12mdk
yet there is a /usr/lib/gcc-lib/i586-mandrake-linux/2.95.3 and not a
2.95.2 directory. This might be the reason behind gcc failing 9 out of 10
times when attempting to compile programs manually.
Compiling programs is
use gcc --version to get the version of gcc it matches the dir then.
On Saturday 11 November 2000 18:01, you wrote:
7.2 is listed to have
# rpm -qa | grep gcc-2
gcc-2.95.2-12mdk
yet there is a /usr/lib/gcc-lib/i586-mandrake-linux/2.95.3 and not a
2.95.2 directory. This
Yes, I have many machines running with the Ultra 100 right now.
On Saturday 11 November 2000 17:44, you wrote:
I'm wondering if the 2.2.17-21mdk kernel in mandrake 7.2 supports the
promise ultra100 card. I'm planning on getting a HD and one of these
controllers to run it and would like to
stephen wrote:
please could someone tell me how to stop kde running all apps
certainly xterm/xemacs for the users home dir and not from the
cwd ???
it's annoying, having to cd everything to where i'm working
Stephen R Parkinson
If you want Konsole in the dir you're looking at, just
The question all of us have, is;
What happens with this machine when it is NOT overclocked. I don't think
anybody here want's to tell you to never overclock hardware. I'm curious if
different OS's/kernel's can make a difference, with the stability with
overclocked machines.
On Saturday 11
For many years I have run my linux box with a hosts.deny of
ALL:ALL.just permits no access. This is exactly how my 7.1 box was
...With the upgrade to 7.2 I find that with this line sounds will not
work in gnome. I've even tried adding ALL:LOCAL, ALL:127.0.0.1 to my
hosts.allow and this still
On Sat, 11 Nov 2000 16:43:48 -0700, you wrote:
I'm using the NJ bios and yes I am overclocking the Celerons
at 550. But that's not the issue. The 2.2.17 kernel.org
source code compiled on my system for smp runs just fine.
It's the mandrake 7.2 (and the redhat 7.0) kernel sources
that cause
Steve Browne wrote:
On Sat, 11 Nov 2000 16:43:48 -0700, you wrote:
I'm using the NJ bios and yes I am overclocking the Celerons
at 550. But that's not the issue. The 2.2.17 kernel.org
source code compiled on my system for smp runs just fine.
It's the mandrake 7.2 (and the redhat
Please Help...
After doing an expert/workstation install low security of 7.2
I have the following problems. I remeber seeing these in expert/cooker,
but didn't save them.
first I have GIANT fonts in everything. checking KDEconf I reset all
fonts
to helvica. applied it and still giant
On Sat, 11 Nov 2000 16:27:11 -0800, you wrote:
Steve Browne wrote:
I have essentially the same system, and the same problem. I found that
the boot-up on the SMP kernel freezes at the point of "checking for
new hardware." That is the point where the program "kudzu" is being
called. I solved
Michael Powell PhD [EMAIL PROTECTED]:
After doing an expert/workstation install low security of 7.2
I have the following problems. I remeber seeing these in expert/cooker,
but didn't save them.
first I have GIANT fonts in everything. checking KDEconf I reset all
fonts
to helvica.
Hi, I've been running a SMP kernel on this machine with both MDK 7.1 (before
last friday), and 7.2 since then My machine's specs are;
tyan tiger 133
dual 667 slot one pIII processors
256 megs pc-133 sdram
( I was using 512 megs for awhile, but decided that this was overkill, so
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
testing
-BEGIN PGP SIGNATURE-
Version: PGPfreeware 6.5.8 for non-commercial use http://www.pgp.com
iQA/AwUBOg39GqAbHp+dQlmvEQL0PgCgliyfUrnzaGoRf1y2cbGVoOuzaZMAn0Yh
bq1IvBBWyhKVu+HYokb0JRBS
=Oc/4
-END PGP SIGNATURE-
Keep in
On Sat, 11 Nov 2000, Anton Graham wrote:
Submitted 11-Nov-00 by David Mihm:
It's also a shame that AfterStep wasn't included. :)
In my local mirror of the 7.2 tree:
(%:~)- ls /mnt/mirror/Mandrake/RPMS/AfterStep-*
/mnt/mirror/Mandrake/RPMS/AfterStep-1.8.0.3-6mdk.i586.rpm
On Sat, 11 Nov 2000, Jason Straight wrote:
use gcc --version to get the version of gcc it matches the dir then.
That's not the point. Packages are labeled for a reason, and this
package is not. It's just one in a string of sloppy things that are
related to 7.2.
On Saturday 11
I am stuck running on a slow internet connection
I bought MDK 7.2 from Macmillan but it wont install
freezes durring second stage install. Does anyone
have a set of CD's they would sell? My system is
much to slow to download the ISO's I need
Thanks
Keep in touch with http://mandrakeforum.com:
If you privately mail me an address to send them to, I'll create a set and send
them for free :]
EOL
Tib
On Sat, 11 Nov 2000, HES wrote:
I am stuck running on a slow internet connection
I bought MDK 7.2 from Macmillan but it wont install
freezes durring second stage install. Does anyone
On Saturday 11 November 2000 08:26 pm, you wrote:
I am stuck running on a slow internet connection
I bought MDK 7.2 from Macmillan but it wont install
freezes durring second stage install. Does anyone
have a set of CD's they would sell? My system is
much to slow to download the ISO's I
Try http://www.cheapbytes.com.
They have all the Linux GPL CDs available for around $2 each, plus cheap
USPS shipping.
-- Asheesh.
On Sat, 11 Nov 2000, HES wrote:
I am stuck running on a slow internet connection
I bought MDK 7.2 from Macmillan but it wont install
freezes durring second
Hi,
In LM 7.2 I am not able to print. When I send a test
page from the client the data is spooled to
/var/spool/samba dir but its not printing.
I am sure it's a config problem but not sure what.
Cheers
Sridhar
=
Good judgement comes from experience,
experience comes from bad judgement
I just installed LM 7.2 and I am trying to configure Samba for my home
network (1 Win98 machine and 1 LM 7.2 machine). I've followed all
instructions in the documentation but no matter what I try I can't seem
to logon to SWAT. It will not accept root username/password. Any
ideas??
begin:vcard
John Scott a écrit :
I just installed LM 7.2 and I am trying to configure Samba for my home
network (1 Win98 machine and 1 LM 7.2 machine). I've followed all
instructions in the documentation but no matter what I try I can't seem
to logon to SWAT. It will not accept root username/password.
Arcana wrote:
I don't know if this is a problem with kde or if it is a problem with
the way Mandrake made their rpm but there IS a problem here. It may
be a problem only associated with athlons (which I have) since some
people, amazingly given the nature of the error I am getting, have
- Original Message -
From: Vincent Danen [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Friday, November 10, 2000 3:43 PM
Subject: [Announce] MDKA-2000:013 - MandrakeUpdate update
- Original Message -
From: Vincent Danen [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Friday, November 10, 2000 3:43 PM
Subject: [Announce] MDKA-2000:013 - MandrakeUpdate update
On Sat, 11 Nov 2000, gene wrote:
This might be a little off-topic, but perhaps someone has
dealt with this here. I'm still trying to get the new
proxified apache mod_perl set up to work.
First, since I have perl scripts in various places, I changed
this:
IfDefine PERLPROXIED
- Original Message -
From: Vincent Danen [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Friday, November 10, 2000 3:43 PM
Subject: [Announce] MDKA-2000:013 - MandrakeUpdate update
59 matches
Mail list logo
