No it just does not work. You can try http://www.aa.com and get similar results.
Looks like you get to do some programming and help out or just wait for the next
edition like most of us. I've seen this problem discussed here before, but no
solutions have shown up yet.
Tom Berkley
Praedor Tempus
> I'm trying to run xine on my machine but I'm getting an error message when
> I try to play a DVD file (I am using the Matrix as the DVD to test with
> since you got it to work)
>
> It starts off okay, then I get this;
>
> read: Bad file descriptor
>
well - there was nothing special i had to do
Mike-
Thanks for the correction. I agree, Open Source is wonderful. I would like
to share with the group a personal experience at my work with Open Source vs.
Something else. When I got there the company was running a web site using
ASP on NT. Hundreds of lines of code to do email forms! T
I've used kvoice on my mandrake 7 and 7.1 installations and liked it very
much. This time I've got a problem I can't work out. I'm running mandrake
7.2 with kde 2.0, a rockwell chipset 56k /voice/data/modem and an ensoniq
es1371 sound card. Running kvoice as root from a terminal I get the
f
Interesting conversation, so here's my $.02.
I work for a small ISP. We're migrating from Windows to Linux (don't blame
me for the NT, I'm moving us to Linux as fast as I can...) and I've played
with RedHat and Mandrake. (I very breifly played with OpenBSD, but the
install was over my head a
www.vortexofsound.com
cheers
> I am in need of the aureal drivers for my monster MX 300 sound card.
>
> Thanks
>
>
> HotBot - Search smarter.
> http://www.hotbot.com
There's plenty of semicolons to go around
Keep in touch with http://mandrakeforum.com:
Subscribe the "[EMAIL PROTECTED]" ma
I am in need of the aureal drivers for my monster MX 300 sound card.
Thanks
HotBot - Search smarter.
http://www.hotbot.com
Keep in touch with http://mandrakeforum.com:
Subscribe the "[EMAIL PROTECTED]" mailing list.
Keep in touch with http://mandrakeforum.com:
Subscribe the "[EMAIL PROTECTE
Check http://rpmfind.net for them.
It looks like it has what you need.
-- Asheesh.
On Tue, 5 Dec 2000, Stefan Srdic wrote:
> I 've been using Oregano (the circuit design tool for Gnome) for quiet
> some time now. I have a few personal designs that I want to test out but
> unfortunetly Mandrake
I'm trying to run xine on my machine but I'm getting an error message when
I try to play a DVD file (I am using the Matrix as the DVD to test with
since you got it to work)
It starts off okay, then I get this;
read: Bad file descriptor
I've tried everything on the xine README and FAQ to no av
PROBLEM STATEMENT - Cannot access CDROM in Dual
Boot Mandrake 7.2 system at any time except after initial boot with CD in
drive.
After unmounting drive any attempt to mount
gives following errors. Note that initially with supermount enabled all
access to all removable media failed!
C
I have a recent Toshiba DVD player that will not
play VCDs, but my cdrom on my linux box will
with Mtv and ZZplayer.
I did not know that a DVD player could
play VCDs, maybe mine is not designed for it.
On Tue, 19 Dec 2000, Al Baker wrote:
>
> VCD (video CD) was a brief moment between VHS and
With enough time and effort, you can cutomized just
about any distribution to act as a powerful server,
even with a fancy desktop on it! Though, I must
admit, I am as intriguied as the next system
administrator about running FreeBSD. -Al
--- "J . A . Magallon" <[EMAIL PROTECTED]> wrote:
>
> On
It is in this one
On Tuesday 19 December 2000 11:17 am, you wrote:
> > The US available Xine-0.3.2 can play non-locked files - which of course
> > is all that I've attempted.
>
> i have just compiled both the latest xine and the xine-dvd plugin from
> http://members.nbci.com/captain_css/ on LM 7
Maybe I missed a message, but could someone send me a URL where I could
find this xine program. I'm currently looking for DVD playback software
for my mdk7.2 machine as well
Thanks
> well - i am not sure i could tell a visual difference between the movie from
> xine and from powerdvd 3.0 that
It's been a good discussion. I just thought I might point out your not
really using the term `commercial' correctly [many Open Source folk
don't]. The opposite of Open Source is closed source. The opposite of
commerical is non-commercial.
Mandrake is a commercial Open Source OS - the commerce
Below is the offending javascript code (it is tied to a secure website but to
get to it, you go through "window.open()", part of "function
popUpDNASeqOrderForm()". I have no problem getting the the initial secure
website that lists the options:
https://www.hci.utah.edu/orderTracking/index.ht
On Wednesday 20 December 2000 02:35, you wrote:
> I installed mod_php from the mandrake 7.2 publically available cd set,
> and installed mysql from www.mysql.net.
>
> when I do a "mysql_connect()", it gives me a function not found error.
> phpinfo() indicates it was compiled with --include-mys
I don't think thats Javascript
It looks like Javascript opens the page but everything else is Server side code
(stml pages).
Couldn't see any Java at all
Andrew
Quoting Praedor Tempus <[EMAIL PROTECTED]>:
> Here is the link to the offending, non-working javascript pages:
>
> http://www.co
Its ral simple, linux wants to run on high quality hardware. High quality OS
wants high quality hardware, makes sence to me.
"Jose M. Sanchez" wrote:
> Not only true but documented in most of the Linux docs.
>
> There are many references to the fact that Linux taxes the system more than
> Window
I got it to compile but it doesn't seem to work
On Tuesday 19 December 2000 07:25 pm, you wrote:
> xine itself I dl'd as an rpm & it's OK - it's the DVD-decoding plugin (or
> module) that's not compiling. Anyone seen a 386-686 pre-compiled anywhere?
> I would think that if Xine itself can run 'ou
I am not sure I know what you are asking.
Kaffe Is a Java machine.
Have you been to www.kaffe.org
It will help you more than I.
Charles (-:
Forever never goes beyond tomorrow.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Joaquín Pérez
Sent: Tues
xine itself I dl'd as an rpm & it's OK - it's the DVD-decoding plugin (or
module) that's not compiling. Anyone seen a 386-686 pre-compiled anywhere? I
would think that if Xine itself can run 'out of the box', then ditto for a
plugin? Or is this wishful thinking?
Mike MacCana wrote:
> I've compil
Thank you for your thoughts and thank you to everyone who has responded. I
have to look at a couple of things. First off, Debian seems to shy away from
any commercial products, I have been told that is why KDE is not included,
you can install it, but it is not part of it. If I were to go wit
Tom Berkley wrote:
> The default configuration for 2.4.0 does not have ppp enabled. You would be wise
> to get the source and compile your own. I had 2.4.0-test11 running just fine
> until I installed the unsupported kde upgrade. Trashed my sound and I have not
> been able to recover it yet, so I
I don't understand this issue.
I dumped Mozilla 0.6 and downloaded and installed the later build dated 12/19.
I installed it (as superuser) and then downloaded the PSM and installed it.
I quit mozilla and restarted as I read you should do.
OK, I then tried to access the https page associated
I have a bulk internal CD-RWriter , that gives that error too
===Transcription begins ===
[root]# cdrecord -scanbus
Cdrecord release 1.6.1 Copyright (C) 1995-1998 Jörg Schilling
scsibus0:
cdrecord: Warning: controller returns wrong size for CD capabilities page
Subject: Re: [expert] How does one get konqueror to work with java?
I want to know if is possible that works with Kaffe???
sorry for my english :-((
--
***
* Joaquín Pérez Iglesias *
* [EMAIL PROTECTED] *
* Madrid-Spain *
**
> Yes, one of the great things about compiling from
> source is you get to use nifty features such as
> ./configure --with-mysql :)
No I have Apache/PHP4/MySQL on my Mandrake 7.2 working together and I
did not have to compile anything ...
[root@duron /root]# rpm -qa | grep -i php
php-4.0.3
> Noticed the specs on your box - I'm about to buy a machine and am
> interested in what your performance was like. Any frames skipped or other
> issues?
> on my linux
> > box (Duron 700->850, 128 Mb, Matrox G400)
> >
well - i am not sure i could tell a visual difference between the movie f
-- Mensaje Reenviado --
Subject: RE: [expert] How does one get konqueror to work with java?
Date: Tue, 19 Dec 2000 16:21:33 -0500
From: "Charles A Edwards" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Before you scrap konqueror try installing jdk 1.2.2 from either Sun or
Blac
On 2000.12.19 Praedor Tempus wrote:
>
> I need javascript. The pages I am unable to use at my university are an
> ordering site for DNA sequencing - it uses javascript up the ying-yang. Not
> even the latest Mozilla can deal with it and Konqueror fails just as
> miserably. No error message
I have reinstalled Mozilla 0.6 and am trying to make it work with secure web
pages. I tried installing the PSM but am not permitted as a user to do so,
so I did it as root. Now, as root running mozilla, I am able to startup the
PSM but as a user, trying to start it up locks up kwm. My mouse
Joseph Red wrote:
> I guess I just wanted to know if it's even possible for 7.2 to share IRQs.
IRQ sharing for PCI devices is set up and dynamically managed by the
PCI boot firmware. It has nothing to do with what OS or OS version
you are using. Mandrake 7.2 has no problem with the PCI interr
On 2000.12.19 Scott Parks wrote:
>
> A guy who works for me tells me that Mandrake can not cut it when it comes to
> production web work and he favors, very strongly, Debian. Telling me that it
> is the strongest for production environments. I have been using Mandrake for
> several years an
VideoCDs are very much alive throughout asia as the chosen media for
most cinema piracy :-(
In terms of consumer accpetance, the `brief moment between VHS and DVD'
was more likely filled by Laserdiscs [which looked like lrge record-size
CDs].
Mike
--
M
Ugh ... bummer. Sorry my advice backfired on you :-(
Dave
At 03:24 PM 12/19/2000 -0700, you wrote:
>Gracias.
>
>I downloaded the security manager for mozilla...it didn't work,
>unfortunately. It trashes mozilla and everything else being displayed on the
>screen. I had to kill mozilla. Crap...
VCD (video CD) was a brief moment between VHS and DVD.
DVD players will play yer VCD's, CD players might
play VCDs but not DVDs.
--- Bill Piety <[EMAIL PROTECTED]> wrote:
> Hi - though I've read about VCD's I've never
> actually seen one. It's mpeg-2 based
> now, I believe, but doesn't seem to h
Gracias.
I downloaded the security manager for mozilla...it didn't work,
unfortunately. It trashes mozilla and everything else being displayed on the
screen. I had to kill mozilla. Crap...thus far it looks like I am going to
HAVE to use Netscape.
On Tuesday 19 December 2000 14:56, you wrot
Yes, one of the great things about compiling from
source is you get to use nifty features such as
./configure --with-mysql :)
--- Bug Hunter <[EMAIL PROTECTED]> wrote:
>
> I installed mod_php from the mandrake 7.2
> publically available cd set,
> and installed mysql from www.mysql.net.
>
>
Please Help !!!
my system is running Xfree86 4.0.1 on LM7.2 and kde2.0
system info = 810 intel mother board + 550e pIII + 192M
when i drag another window on top pf konsole ro xemacs window
the window gets garbled in places where the edges of the dragged window
was present inside konsole/xema
It appears that konqueror's problem on that page is with the JavaScript
window.open() method, which opens a popup window for the user to enter
their information. I tried a simpler page with just the window.open()
command, and it did not work. Mozilla can open the window, however. But
you alrea
If you're looking for case studies of high traffic sites, both MS Hotmail
and Persian Kitty [the biggest sites in their respective
categories or webmail and porn] primarily use FreeBSD.
Yahoo [biggest search engine] uses FreeBSD for its front end, but is now
powered by google, a
clustered Li
You can IMPORT your old settings into the menu-configurator and then go thru
each of the choices one at a time, to be sure that new conflicts are dealt
with.
This seems to work fine.
Merely utilizing the old settings is not quite enough as you might not end
up compiling or configuring a require
Not only true but documented in most of the Linux docs.
There are many references to the fact that Linux taxes the system more than
Windows does. As a result even small problems quickly surface. These
problems are not Linux's fault however.
The payback is that once the problems are removed, you
OK, because of javascript issues with both Konqueror and Mozilla 0.6, I had
to install Netscape 4.76 since it does work with all javascript-laden pages I
have ever come across with it. Problem now is the damn bus error that always
accompanies a Netscape browser.
It has been a while since I h
I hate to say this but the ISP's I know in the midwestern US run FreeBSD or
Unix. I've been on one provider several years; his only planned downtime is
hardware upgrades. It's the best connection in four-states and he runs
FreeBSD..
Pj
Keep in touch with http://mandrakeforum.com:
Subscribe t
Hmmn. Performance is likely to be pretty much the same for both
distributions. Open Source software installation is much easier on Debian
[packages are downloaded and pdependencies worked out automatically].
Closed source aps [which you might have a need of] are generally more
available for RP
Hi
I did compile it and it worked great. (nvidia and alsa). the only thing
that didn't work is the 'xine dvd://t0c1t10' (as it suggested in the
readme file of the xine_dvd_plugin).
have you tried using livid's oms. although it's doesn't play fullscreen I
think it's much better. btw, has anyone ma
Noticed the specs on your box - I'm about to buy a machine and am
interested in what your performance was like. Any frames skipped or other
issues?
Mike
--
Mike MacCanaSupport Consultant
C Y B E R S O U R C E
Level 9, 140 Queen
I've compiled Xine perfectly on my Linux Mandrake 7.2 machine. Its a PII
400 with 256Mb of RAM. The compile was very easy [standard instructions]
and despite some warning about ALSO, it works fine [albeit in OSS mode].
I'm using software decoding on my PC, and performance is pretty terrible
th
Before you scrap konqueror try installing jdk 1.2.2 from either Sun or
Blackdown.
I am using that from Sun and I have noticed no problems witn java in either
konqueror or StarOffice 5.2
Charles
Forever never goes beyond tomorrow.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[E
I'm not sure what the official answer to this question is, but I've done it
many time with no problems. Most of the .config variables would exist in
later versions of the kernel. Presumably, any features new in later kernels
would need to be set if you intend to use them -- but if you're bringi
Here is the link to the offending, non-working javascript pages:
http://www.cores.utah.edu
Now select "DNA Sequencing" in the left frame. You will be taken to a page
with 3 "buttons": Homepage, Publications, Ordering. Select Ordering. You
will then get to a page where you can initiate a seq
I apologize if this shows up more than once. My log shows that I have already
posted this message but I have never seen it appear.
Suppose you had kernel-2.2.16 configured just they way you wanted it to be
configured. And you saved the .config file.
Then you want to upgrade/change to kernel-2.2.
I've heard that FreeBSD is less prone to problems in a production
environment also. However, we run RedHat 6.2 24/7 and have very few
problems.
On Tue, 19 Dec 2000, Laurent Duperval wrote:
> On 19 Dec, Scott Parks wrote:
> > Anyone have some thoughts on this issue? The machines are dual P3
Having luck with new cups and Epson900
in high/res mode 720/1200/1440/2400 dpi
I have been trying out Soffice 5.2.
I am attempting to print from a file.sdw format
(star graphices) and can only get 360dpi to
print though the other resolutions are shown as available.
what am I missing?
William Bout
Star office does not work with the JRE either, it requires the JDK for
linux. Give that a try. I suspect it will work. http:/www.blackdown.org
On Tue, 19 Dec 2000, Praedor Tempus wrote:
> OK, this problem is making konqueror just about useless to me. I am unable
> to access any sites th
First of all, the Java Virtual Machine is not required for JavaScript to
work -- the two are completely different animals. I don't know how to get
Java working, but JavaScript works fine in konqueror on my system.
However, there is a caveat with regard to JavaScript: both konqueror and
Mozilla
I'm using a linksys ethernet card, and it is very stable once
configured.
On Tue, 19 Dec 2000, Scott Parks wrote:
> Same problem here. If you dual boot you must shutdown, then re-power the
> unit for the nic to work right.
>
> Of course once it is on I can use it about 2 minutes before it
On Tuesday 19 December 2000 13:29, you wrote:
> > Hi !
>
> Javascript has nothing to do with Java. It's a totally different think.
> Javascript support is integrated idn Konqui and it works, at least for me,
> great (in 2.0, 2.0.1 and now in 2.1beta).
[...]
I need javascript. The pages I am una
On 19 Dec, Scott Parks wrote:
> Anyone have some thoughts on this issue? The machines are dual P3's with 18
> gig drives in arrays, 2 gigs ram each. Multiple machines behind Cisco Local
> Director. Mandrake installs fine on each box, Debian is a bit more
> bothersome to configure, but I can
Hi !
Javascript has nothing to do with Java. It's a totally different think.
Javascript support is integrated idn Konqui and it works, at least for me,
great (in 2.0, 2.0.1 and now in 2.1beta).
So, Java works also if you have installed a Java Development Kid and entered
the correct path in t
Hi all,
I do not want to start a Holy War or anything of that nature. I am looking
for honest success stories on using Mandrake in a production web environment
for web hosting and postgres for serving the php pages.
My professional experience has been with BSDI, FreeBSD, Solaris and NT for
h
OK, this problem is making konqueror just about useless to me. I am unable
to access any sites that require/user javascript. I am using KDE 2.0 with
Konqueror 1.9.8.
I do NOT have netscape installed. I DO have the IBM's Java 1.3 jre installed
and I do have Mozilla 0.6 installed. I have tri
Same problem here. If you dual boot you must shutdown, then re-power the
unit for the nic to work right.
Of course once it is on I can use it about 2 minutes before it stops anyways.
I tried another nic and same thing, do an FTP transfer into or out of the box
and it kills all networking about
I had something similar on a dual boot laptop that was originally
booted into Windows. I had to power it off to get it to recognize the
network pcmcia card. Windows had left it in a badly configured state.
bug
On Tue, 19 Dec 2000, Laurent Duperval wrote:
> Hi,
>
> Using LM7.2, for some re
I installed mod_php from the mandrake 7.2 publically available cd set,
and installed mysql from www.mysql.net.
when I do a "mysql_connect()", it gives me a function not found error.
phpinfo() indicates it was compiled with --include-mysql
I searched through the archives and did not find a
Hi,
Using LM7.2, for some reason the above network card is not recognized. I
went to the pcmcia.cs site and it says that it should be recognized by the
PCMCIA module 3c575_cb. I looked at /etc/pcmcia/config and I see the
following line:
device "3c575_cb"
class "network" module "cb_enabler", "3
Captain CSS - went to your website for the plugin (0.0.9) - configure
went seemingly OK, but make gave the following. Do you have any thoughts
on the problem? 'Final Destination' is staring at me, begging to go.
I've probably gotten too dependent on rpm's - total rarity that I try to
'make' anymor
Does anyone knows how i can install LM7.2 with that RAID controler or
where can i find drivers for it.
Thanks,
Rafa
Keep in touch with http://mandrakeforum.com:
Subscribe the "[EMAIL PROTECTED]" mailing list.
The list admin on another list I'm on had this to say:
> If you still have those messages you can see that they have the same
> Message-Id: header, but the queue-id numbers for the Received: headers
> are different. That indicates that the message was injected into the SMTP
> server twice. No gre
Hi - though I've read about VCD's I've never actually seen one. It's mpeg-2 based
now, I believe, but doesn't seem to have made any inroads in my area (New
Orleans). However, thru my near-total lack of info on VCD I could be missing
quite a bit.
Balaji Ramani wrote:
> On Tuesday 19 December 2000
Whoa! Exactly what I've been looking for - but is it a no-go for us still on X
3.3.6?. I've got a T-bird 900, 128mb, TNT 32megs. My single short attempt at
going to 4.0 (at that time) wasn't a happy experience. After following numerous
newsgroup threads about 7.2 probs & various X issues I decided
See the post on http://www.mandrakeforum.com
(has to do with ata100 drivers for i586)
Buchan
cavall_fort wrote:
>
> Mega-Problem with Linux 7.2. I need HHEELLPP. Thanks.
>
> See you !
> - Original Message -
> From: cavall_fort <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Satur
On Saturday 16 December 2000 08:23 am, RedRat wrote:
> On Friday 15 December 2000 16:25, you wrote:
> > Beta1 is on nebsllc.com in pub/KDE_UPDATE
> Anyone tried these rpms? Any problems?
Yeah, they work great. BTW, I reported a day or so ago that the
kdeaddutils rpm fails on a libkscan dep.
On 19 Dec, Emanuele Parati wrote:
> I had the same problem. With ReadHat 7.0.
> Changing the Hard DIsk setting in the BIOS in LBA fixed this problem.
>
Well, we installed LM7.1 and it worked, w/o touching the LBA stuff.
L
--
MY EMAIL ADDRESS HAS CHANGED --> UPDATE YOUR ADDRESSBOOK
Laurent Du
Hey guys,
was just wondering about something. I want to turn off the power
management feature which shuts off the screen after a certain amount of
time.
Both in X and in Console.
However, I don't want to remove apmd from the system, because without it,
I can't shutdown my Linux machine from t
Mega-Problem with Linux 7.2. I need HHEELLPP. Thanks.
See you !
- Original Message -
From: cavall_fort <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Saturday, December 16, 2000 8:53 PM
Subject: [expert] Installation LM 7.2 : Stop after first IDE detection.
> Hello :
>
> I have
> The US available Xine-0.3.2 can play non-locked files - which of course
> is all that I've attempted.
>
i have just compiled both the latest xine and the xine-dvd plugin from
http://members.nbci.com/captain_css/ on LM 7.2, XFree 4.0.1, KDE 2.1b1 and I
was really suprised - no problem during com
On Tuesday 19 December 2000 11:08, you wrote:
> Good morning. I downloaded & installed the US 0.3.2 & played a test file
> from a rental movie-CD. 1st time it played with sound, then later error
> messages re: OSS and no sound. As below, I've been using ALSA (which has
> started doing mysterious t
Good morning. I downloaded & installed the US 0.3.2 & played a test file from a
rental movie-CD. 1st time it played with sound, then later error messages re:
OSS and no sound. As below, I've been using ALSA (which has started doing
mysterious things, but that's another issue). Is your RPM a 586 of
Botch Corel and Caldera have a graphical LILO menu, I installed Corel for a
short while right after their first release, just to test it. And the thing
that got my (and others) attention was the graphical LILO boot menu.
I've been searching web-sites, downloaded iso's and so on for 2 days now,
I have a mandrake RPM that I am polishing up so that I can submit it to
mandrake for inclusion in the contrib dir. In case you need it a bit sooner
than that, let me know.
Balaji
On Tuesday 19 December 2000 10:42, you wrote:
> Has anyone attempted to compile (and it goes without saying that t
Has anyone attempted to compile (and it goes without saying that this
would be in the abstract only, since there are legal issues in the US)
the special build of Xine 0.3.2 that enables DVD playback of
commercially recorded movie-CD's? I'm running thru mentally what might
occur
on my Mandrake 7.1,
How well does mdk7.2 handle IRQ sharing. I recently upgraded my sound card
from an ISA sb16 to a sb pci128, and the pci128 uses 2 IRQs. One of the
irqs is shared w/ USB (necessary for webcam). I've looked through, and
there's really no device I can live without, so disabling isn't an option.
Th
Rusty,
Since you have the most complete set of questions... :^)
Rusty Carruth wrote:
>
> Pierre Fortin <[EMAIL PROTECTED]> wrote:
> > I have analyzed just over 250 messages from Cooker and Expert lists. Of those,
> > there were 20 duplicated and 3 triplicated messages.
>
> I'm impressed! I
I'm running Mdk 7.0 and I'm loading some text files into mysql.
1) I cleaned up the files a whole bunch (quick perl scrpt.)
2) Their's a little "dirty" data left, but MySQL jsut gives me a warning
count, not the rows in question, so I'm extracting the loaded tables
back and doing a compare on the
I had the same problem. With ReadHat 7.0.
Changing the Hard DIsk setting in the BIOS in LBA fixed this problem.
bye, Emanuele
Keep in touch with http://mandrakeforum.com:
Subscribe the "[EMAIL PROTECTED]" mailing list.
Hi,
I'm pretty sure I've seen this before but I'm not sure how to fix it. A
colleague is trying to install a SuSE distro. When it tries to boot, the
"LI" from the lilo prompt appears and the machine hangs. We're going to try
it with LM7.1 but if the symptom points to another problem, please let m
I've had similar experiences with my Acer Powermate 7200 and a HP Omnibook
4150 in regards to stupid cdrom/dvd issues. In both cases, it looks like
the manufacturer took a "creative" approach to implementing the atapi
standard on the drives. The HP would go into a blocked I/O mode (Indicated
by
And yes, I did receive 2 copies of your message - one with "X-Sequence:
541" and a mime line break of"=_977205139-32701-0", the
second had X-Sequence: 542" and a mime line break of
"=_977205139-32701-1" (eye check only, not diff'd) The
strange part is all the message ID#'s
Pierre Fortin <[EMAIL PROTECTED]> wrote:
> I have analyzed just over 250 messages from Cooker and Expert lists. Of those,
> there were 20 duplicated and 3 triplicated messages.
I'm impressed! I quit after 2 or 4 ;-)
> From my short sampling, these are the causes of message replication I came
Buchan Milne <[EMAIL PROTECTED]> wrote:
> ... What init string are you using?
>
> Buchan
>
> Praveen Srinivasan wrote:
> >
> > Hi,
> > I have two external modems w... This used to work with RedHat 6.2.
Also, if you happen to know what the init string in 6.2 was, that might
solve your problem.
Hoping this adds something to the tracking down of the problem and doesn't
muddy the water more...
I have an LG (Goldstar) IDE cd burner, similar to Rog's (bios ver 1.05
instead of his 1.07, but otherwise the same) and I get the same error.
I also find that after burning a cd, the read light
Matthew J Fletcher escribió:
> Hi,.
>
> I installed and configured a 2.4.0 kernel for intel 815 support but when i create
> a boot floppy and boot from it say it cant mount the root fs and gives a kernel
> panic,
> All this works correctly with my old 2.2.x kernel using the same process,..
>
>
I haven't had any problems with 2 seperate machines and 2 seperate
external modems. Could yo give us more details ? What software are you
using? What modem is it? What init string are you using?
Buchan
Praveen Srinivasan wrote:
>
> Hi,
> I have two external modems which work fine in windows wit
same here... and i'm using Lotus Notes. so its obviously got nothing to do
with the clients.
Ashley.
Alexander Skwar
You picked lcd monitor 1024x768 during the Xconfiguration?
tom berkley
Orders wrote:
> Hello there,
>
> Has anybody managed to get Xwindows to work on an Inspiron
> 5000e ? I am using Linux Mandrake version 7.2 but cannot find the
> right settings although it recognises the graphics card (ATI R
98 matches
Mail list logo