Hello all,
I was wondering about a couple things. Is Adobe going to make two
separate products, Flash Builder 4 (aka Flex Builder) and Flex Builder 4?
Maybe I read something wrong. Perhaps, Flex 4 is the new SDK and Flash Builder
4 will replace Flex 3, so there wouldn't be a Flex
I saw this component somewhere that had a poem that scrolled slowly
automatically, like you would if you read a page and it doesn't all
fit in the window, such as with this window where I am typing this.
Now, if there was an automatically scrolling feature, it would be
important for a reader to
In the example I discussed recently, about publishing poems online
using flex, I used images to hold the actual text of the poem. I
thought initially, not sure why, that I had to use that to ensure the
layout of the text. Obviously there are ways to use a '\n' to force a
newline.
However,
Hello all,
I started publishing a collection of poems for someone a while
back when I was very much new to Flex. I chose to use an accordion
component to hold one poem or a single page of a poem that spanned
several pages. The accordion is contained in a Panel. Each group of
4 or 5
to the right, just above
Categories.
Haykel Ben Jemia
Allmas
Web RIA Development
http://www.allmas-tn.com
On Wed, Feb 18, 2009 at 3:51 AM, brucewhealton
br...@...wrote:
Hi,
I thought the flexbook was open-source but I cannot find that
information on the page now. I just seem
, 2009 at 5:27 AM, brucewhealton
bruce@ mailto:bruce@ wrote:
Hello all,
I was wondering if anyone could recommend some good resources
for components, be they open-source, free, or commercial. I was
reading Jack Herrington's book Flex 3: Component Solutions
and I
Web RIA Development
http://www.allmas-tn.com
On Tue, Feb 17, 2009 at 5:27 AM, brucewhealton
br...@... mailto:br...@... wrote:
Hello all,
I was wondering if anyone could recommend some good resources
for components, be they open-source, free, or commercial. I
and in Dreamweaver it looks
right but when I preview in browser, it's not right.
The page is here: http://FutureWaveDesigns.com/QuoteForm/
Thanks in advance for any tips on this,
Bruce
--- In flexcoders@yahoogroups.com, brucewhealton br...@... wrote:
Tracy,
Ok, when I setup the accordion to display a 4
)
Haykel Ben Jemia
Allmas
Web RIA Development
http://www.allmas-tn.com
On Tue, Feb 17, 2009 at 5:27 AM, brucewhealton
br...@...wrote:
Hello all,
I was wondering if anyone could recommend some good resources
for components, be they open-source, free, or commercial. I was
reading
Hello all,
I was wondering if anyone could recommend some good resources
for components, be they open-source, free, or commercial. I was
reading Jack Herrington's book Flex 3: Component Solutions and I
found a number of interesting components discussed. I'm looking at
the ones for
Hello all,
I was looking at the navigateToURL method and wanted to see
about using an image as a clickable link to a website. The image
component does not have an onClick property, so it isn't possible to
make an image into an active link to a website. Is there a way to
accomplish
Hello all,
I have a form that I setup with 4 different accordion panes.
The container type for the Accordion is a Form component. I am
finding it hard to get the containers to expand to accommodate
additional content that cannot fit on the current form pages or the
accordion panes. I
, brucewhealton br...@... wrote:
Hello all,
I have a form that I setup with 4 different accordion panes.
The container type for the Accordion is a Form component. I am
finding it hard to get the containers to expand to accommodate
additional content that cannot fit on the current form
From: flexcoders@yahoogroups.com [mailto:flexcod...@yahoogroups.com] On
Behalf Of brucewhealton
Sent: Sunday, February 08, 2009 10:35 PM
To: flexcoders@yahoogroups.com
Subject: [flexcoders] Re: Problem with Accordion Component resizing.
Hello,
I meant to include
Hello all,
I've run into a rather strange situation with a website where I
am placing some flex applications, the swf files. I've done this
before without any problems. I've taken a Flex output, the
application and opened in Dreamweaver and then selected TemplateApply
Template, and the
...@... wrote:
Take a look at the MenuBar control:
http://livedocs.adobe.com/flex/3/langref/mx/controls/MenuBar.html
Haykel Ben Jemia
Allmas
Web RIA Development
http://www.allmas-tn.com
On Mon, Jan 19, 2009 at 12:06 AM, brucewhealton br...@...
wrote:
Hello all,
I
Hello all,
I was wondering if anyone could share some tutorials on how to
create a horizontal menu with drop-down sub-menus. Please let me know
if you can think of any good examples with tutorials/script examples
for learning, etc.
Thanks,
Bruce
Hello all,
I hope I can explain my question clearly. Let's say that I create a
Flex Project, Export a Release build and then incorporate it into a
website. Then I realize I want to make a change to the application
that I brought into my website. I will have to export the release
build again.
Hello all,
I am having trouble finding out how to do this. Is it not
possible to call two different applications on creationComplete for
the Application tag? I have an application that calls two different
xml files that have lists of one full-size images and two thumbnail
size images
) or it isn't on your library-path.
Gordon Smith
Adobe Flex SDK Team
From: flexcoders@yahoogroups.com [mailto:flexcod...@yahoogroups.com]
On Behalf Of brucewhealton
Sent: Thursday, January 08, 2009 6:25 PM
To: flexcoders@yahoogroups.com
Subject: [flexcoders] Namespace declaration problem
Ok, thanks. Someone was saying that this was part of a flex
installation. So, maybe I need to go into the library definition and
somehow add this folder. I have used package definitions like this
but when the text I was following didn't have this particular folder
structure.
I'll try to add
Hi,
That is a pretty cool application. It's nice the way the code
shows up too. How does one get the code to appear just like that when
publishing an application? I'd like to be able to have that with some
of the apps that I create.
The only thing lacking would be a backend where the
It's still a work-in-progress, but have a look:
http://www.theliblab-tutorials.com/bigoso/gallery/
Yuri
--- In flexcoders@yahoogroups.com, brucewhealton bruce@ wrote:
Hello all,
Can anyone recommend some good examples of how people have
used Flex to create nice photo
Hello all,
I have this code that I copied from a text book on Flex. I'm
aware of package notation but I'm not sure how this works in this
example and what is going wrong. In the code, I have within the
Application tag, a namespace definition. So, the Application tag
opens like this:
Hello,
Can someone help me with something. I wanted to know where
one can find the most up to date documentation on the web for the
various Flex 3 Components, classes, language reference and so on. I
did a google search and found some documentation on some components,
i.e. the mx:Text
Hello all,
Can anyone recommend some good examples of how people have
used Flex to create nice photo galleries with different effects. I'd
like to see about integrating a database and a scripting language like
PHP to allow the end user on a website to update their gallery of
photos after
@yahoogroups.com, Manish Jethani
manish.jeth...@... wrote:
On Fri, Dec 19, 2008 at 12:05 PM, brucewhealton
br...@... wrote:
I'm reading about the Panel Container in Flex 3 and at one
point I'm told that this has a series of four layout handles. Each of
these can be set to anchor, unanchored
Hello all,
I wanted to get the opinion of others for something. If you
were going to present audio or video on the web, would you use Flash,
Flex or both? It used to be that Flash would be the choice to present
a nice video presentation on the web. Now there is Flex which works
with
Hello all,
I'm reading about the Panel Container in Flex 3 and at one
point I'm told that this has a series of four layout handles. Each of
these can be set to anchor, unanchored or center. I'm not seeing how
that is done. I've used Panels but I never found anything like this
and the
Hello all,
I was wondering if you could explain some things or suggest
some options. I have a page that opens in a new window and displays a
Flex form. When the information is submitted and they click on
Submit, an Alert Box appears. I want to have a way to take people
back to the main
is defined with
target=_blank in the html. So, I'm not sure if it would be possible
to close that windows when returning from the Flex application.
--- In flexcoders@yahoogroups.com, brucewhealton [EMAIL PROTECTED] wrote:
Ok, but how do you add a link within a flex application? I want a
link
] wrote:
Look at the docs for Alert. You can pass it a close handler.
On 02/12/2008, at 7:51 AM, brucewhealton wrote:
Hello all,
I was wondering if you could explain some things or suggest
some options. I have a page that opens in a new window and displays a
Flex form. When
Hello all,
Anyone have any ideas as to why I would get this message:
Security Sandbox Violation? I googled it and came up with a listing
where it said that if I was seeing it in Firefox browser to try it in
IE browser. I did that and did not get the message when using IE.
Note, this
I'd use a list instead of a comboBox.
Next, taking the ComboBox as an example, I could use help figuring out
how to pass the item selected by the user to the Object named obj so
that it can be passed to the php form processor. How do I access what
the user selected? Similarly, if I
is to get an HTTP
debugging proxy like Charles (http://www.charlesproxy.com/). I use it
every day.
--- In flexcoders@yahoogroups.com, brucewhealton bruce@ wrote:
Hello all,
I have been unable to figure out why something simple is not
happening in a form of mine. I have a form
Hello all,
I have been unable to figure out why something simple is not
happening in a form of mine. I have a form that does successfully
take the user input and email it to us. However, for some reason, the
Alert button that should give the user feedback is not working. It
just hangs
I have a form that I've been using to handle TextInput components in
Flex and I want to now be adding other components. This is a form
that sends data to a php form processor that either puts the data into
into a database or just emails it, or both.
When working with this component:
mx:FormItem
Hello all,
I thought I could use the Accordion panel to nicely layout a
collection of poems. The problem is getting the poetry to layout on
the page right. I sure could use some tips on this. I have an
Accordion wrapped in a Panel container. That's not the issue. The
issue is the
Hello,
I was wondering what the best way to redirect someone in Flex
would be? Suppose the user clicks on a link and it takes them to a
page created in Flex that provides a form. When they finish, I want
to return them to the web page where they were or to a home page on
the site. How
Hi Tracy,
How would you do this, when you say wrap all the data in a
status node? Is that in the form processor? Or is that what you do
in Flex? Once you send the data from Flex we have no control within
Flex over what is returned, correct?
One other question, if you were going to
Hello,
Currently, I have an application that opens in a new window.
It is created in Flex and is linked to from another page on my site.
Currently, I have the flex application page open up using target=_blank.
When the user goes to the new page, they are given a form and
when they
. The
application should listen for that event and despatch a message
using the
event payload.
I would suggest recapping some of your classes.
Paul
- Original Message -
From: brucewhealton [EMAIL PROTECTED]
To: flexcoders@yahoogroups.com
Sent: Friday, October 17, 2008 1:34
of the form content. The
application should listen for that event and despatch a message
using the
event payload.
I would suggest recapping some of your classes.
Paul
- Original Message -
From: brucewhealton [EMAIL PROTECTED]
To: flexcoders@yahoogroups.com
Sent
section with the component BarChart.
Now you can run any of the six demos included. There are some runtime
errors but these seem to be security sandbox problems that I have not
looked into.
--- In flexcoders@yahoogroups.com, brucewhealton bruce@ wrote:
Hello all,
I sure hope
We are close, hopefully. I still get an error on the lines inside the
sendMyData function. It is giving me an error that says,
Error: Access to undefined property Name,
Error: Access to undefined property Email,
Error: Access to undefined property Message,
It should be noted that I have the
):void
{
var obj:Object = new Object();
obj.Name = Name.text;
myContactService.send(obj);
}
On Thu, Oct 16, 2008 at 7:49 AM, brucewhealton
, 2008 at 9:10 AM, brucewhealton
[EMAIL PROTECTED]wrote:
Hi, thanks for the help. I did what you mention below. Someone else
posted somethingsimilar about putting the Object property into the
function.
It still doesn't like that yet. It gives me an error on the line in
the function where
Hello all,
I sure hope someone can help me with this. I stumbled upon a
great Flex component that will fit a need I have. Actually, it was
only when I found this that I realized I need this. It's the
FlexBook, PageFlip component that is available from Quietly Scheming
here:
a player using AS2.
Good luck.
Paul
Paul
- Original Message -
From: brucewhealton [EMAIL PROTECTED]
To: flexcoders@yahoogroups.com
Sent: Saturday, October 11, 2008 6:01 AM
Subject: [flexcoders] Couple questions
Hello all,
I had a few questions, where I could use
]
wrote:
For online presentations you could try http://www.sliderocket.com .
It's a
commercial service but if you will be putting regularly presentations
online, I think this will help you a lot to create great ones!
On Sat, Oct 11, 2008 at 7:01 AM, brucewhealton
[EMAIL PROTECTED]wrote
--- In flexcoders@yahoogroups.com, Amy [EMAIL PROTECTED] wrote:
--- In flexcoders@yahoogroups.com, brucewhealton bruce@ wrote:
Hello all,
I had a few questions, where I could use some suggestions or
opinions and ideas. One is regarding Powerpoint-like presentations
online
--- In flexcoders@yahoogroups.com, Paul Andrews [EMAIL PROTECTED] wrote:
- Original Message -
From: brucewhealton [EMAIL PROTECTED]
To: flexcoders@yahoogroups.com
Sent: Thursday, October 16, 2008 1:40 AM
Subject: [flexcoders] Re: Couple questions
Replicating all that in Flex
--- In flexcoders@yahoogroups.com, Steve Mathews [EMAIL PROTECTED] wrote:
Somehow I missed this discussion, but I might be able to offer some
relevant
info. First off, I am the Sr. Team Lead of Flash/Flex development at
www.flypaper.com. We created a product that creates presentation
slides
the assignments in the result handler of the
HTTPService anyway.
Hope this helps!
On Wed, Oct 15, 2008 at 6:22 AM, brucewhealton
[EMAIL PROTECTED]wrote:
Hello all,
Flex is not liking the way I setup the Object in a CDATA block
in a Form Component.
I have a Form component in a forms
Paul,
Thanks for the tip. I wonder if the AS 3.0/Flex library includes
any components that would work as slides players. My flex builder
application is having problems when I try to pull up the help
files/documents. So, would you know of where I could go to find info.
on what is
Hello all,
Flex is not liking the way I setup the Object in a CDATA block
in a Form Component.
I have a Form component in a forms subfolder/subdirectory of
the src directory/folder. I have an application in the src folder
called FormRequest.mxml and in the forms folder I setup
tabs to group the logical groups would be nice too.
Just my 2 cents.
Regards,
PS
On Fri, Oct 10, 2008 at 8:54 AM, Howard Fore [EMAIL PROTECTED] wrote:
On Thu, Oct 9, 2008 at 11:46 PM, brucewhealton
[EMAIL PROTECTED] wrote:
So, I'm wondering about some other ways
Hello all,
I had a few questions, where I could use some suggestions or
opinions and ideas. One is regarding Powerpoint-like presentations
online. If you were going to do something like this, would you use
Flash or Flex - maybe these are not even the best choices? Are there
extensions
Hello all,
I could use some advice on a Flex design. I am needing to
create a form, a rather lengthy one, using Flex. I was thinking of
starting with a Flex Component, in particular a Custom component based
on the Form component.
In particular, it will have this:
mx:Form
Hello all,
I am having some difficulty with my first application that
uses Flex with PHP/MySQL when I try to deploy it on the remote server
that I am using to host my domains. I am taking a class and we
created a Flex application that accesses a database using PHP. This
was done
Hello all,
I was wondering if someone could help me with an Adobe Flex
problem. I had an application running just fine yesterday and today
I'm getting some specific errors. When I select Run from within Flex
it comes back and says in Internet Explorer Done, But with Errors.
This is in
Hello all,
I think I would need to include the code to get an idea as to
what I might be doing wrong. So, I posted the code for the three
files here: http://futurewave.biz/PhotoViewer/sourceCode/PhotoViewer.as
http://futurewave.biz/PhotoViewer/sourceCode/SlideshowViewer.as
or not.
Thanks,
Bruce
Flex Developers forum - with support for newbies:
http://futurewavedesigns.com/aria/
Please check it out.
--- In flexcoders@yahoogroups.com, brucewhealton [EMAIL PROTECTED] wrote:
Hello all,
I think I would need to include the code to get an idea as to
what I might
Hello all,
I think I wasn't clear when I discussed something related to
this previously in a posting. I see some very useful and elegant
tools for creating form elements using Flex. When designing in xhtml,
using Dreamweaver, I call the form processor from the opening form
tag, which
Hello all,
I was going through some tutorials on Flex 3 just recently, that
I found on Flex that were available on the Flex start screen when you
start the application. The tutorial on creating a Flickr application
was pretty interesting and rather simple to do. That is described
here:
Hello all,
I see some very useful and elegant tools for creating form elements
using Flex. When designing in xhtml, using Dreamweaver, I call the
form processor from the opening form tag, which calls a php file -
that's I have been using, mainly for form processing. It returns the
values
Hello all,
I'm not sure why this particular class is not working for me.
It's part of a tutorial. I'll include the AS below. I've been
pulling my hair out trying to figure this out. When I select debug,
it should display in the console repeatedly the text enter frame.
It prints what
Hello all,
I've recently gotten a good handle on using the spry
framework in Dreamweaver and the tags that are part of a good practice
when creating forms in DW. Now, I'm looking at creating and
processing forms with Flash and Flex. This is different.
Can someone suggest some
Hello all,
I was looking at a few nice tutorials on ActionScript. One of
them is developed with the Flex Builder application as the focus for
the work done. Obviously, it is good learning for Flash or Flex. In
the training, which is visual, the instructor creates an ActionScript
3.0 project in
Hello all,
I have run into a problem since I reinstalled Flex CS3. The
projects I had created were not recognized by Flex. So, I thought I
would just redefine them in Flex again (Flex CS3). I had a site
backed up on DVD and so I put it into my flex project location here:
Hello all,
I hope someone can help me figure this out. Flex projects
that I created a while back are running ok from within Flex. However,
recently, I created two projects both of which are displaying errors.
Here's what happens. I create a project called ProgrammingBasics.
This is an
-
From: brucewhealton [EMAIL PROTECTED]
To: flexcoders@yahoogroups.com
Sent: Sunday, June 29, 2008 3:24 AM
Subject: [flexcoders] Problem running/debugging in Flex
Hello all,
I hope someone can help me figure this out. Flex projects
that I created a while back are running ok from
Maybe we need groups for different users at different experience
levels. I think this list is so big that it is hard to find a
response or thread, especially when one posts a question and wants to
find out if someone responded. I have to look and look to see if I
can find that thread anywhere,
@yahoogroups.com [mailto:[EMAIL PROTECTED] On
Behalf Of brucewhealton
Sent: Wednesday, June 18, 2008 5:21 PM
To: flexcoders@yahoogroups.com
Subject: [flexcoders] Problems with Flash Player not recognized and
problem with flex app loading xml
Hello all,
I'm getting the error in Internet
Hello all,
I'm getting the error in Internet Explorer, (IE) when I try to run
any application from Flex Builder CS3. This shows up when I am in
Flex Builder CS3 and select Run on an application or when I open an
application in IE from the server if it was created in Flex. The error
is: Alternate
Hello all,
I have to say that this relates to some very basic things
that I guess I don't yet have a good handle on yet. Ok, the first
issue relates to a problem I am having with the Flash Player. I did
address the issue previously on this list of not having the correct
Flash Player,
Anyway, the reason this trouble started was because I was trying to
test out a dataGrid that was to be populated by an xml file. I was
following a training video on the site Lynda.com It ran fine on the
video but when I tried that out it said that there was a problem
related to accessing the
Sorry, please ignore the prior posting as it went before I had a
chance to edit it clearly. This is a very depressing problem to run
into as I thought I was moving on nicely with learning Flex. Also,
I'm not entirely sure how to describe what is going on, which makes
finding a solution rather
--- In flexcoders@yahoogroups.com, brucewhealton [EMAIL PROTECTED] wrote:
Hello all,
I have to say that this relates to some very basic things
that I guess I don't yet have a good handle on yet. Ok, the first
issue relates to a problem I am having with the Flash Player. I did
address
Hello all,
I'm rather new to Flex but I see some exciting things that can
be accomplished with Flex. In the past, I would try to get Flash to
do everything that Flex can do now, with less work and effort.
Anyway, I am using self-paced methods to learn Flex CS3 and be
able to use it
I was asking about this also, in a different posting of my own. I was
having trouble finding the debug version of Flash player. I did find
a copy of a Flash player uninstall program. So, I just need to get
the copy of the Flash Player debug version. The might be answered
already in another
81 matches
Mail list logo