I might be wrong here.. but I think you need some specific raid drivers for
the TX cards to work
the tx2000 is seen as an standard ATA interface. no driver needed
Len
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in the body of the message
On Mon, 24 Feb 2003 18:39:11 +1100
Sam Izzo [EMAIL PROTECTED] wrote:
Howdy,
Yeah, OpenPTC doesn't accept that parameter :/
Being a curious person myself I cvs co'd the OpenPTC thing to try it
here. I've tried it on a NetBSD box, but the procedure to build it on
FreeBSD should be similar.
how can i create image of audio cd in FreeBSD-5.0?
dd if=/dev/acd0 of=cdimage bs=1024 produce error - invalid argument.
with simple data cd dd works fine.
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in the body of the message
On Sun, Feb 23, 2003 at 10:48:22PM -0500, taxman wrote:
So I guess I need to figure out how to use refuse files. I wonder why the
individual ports collections are listed in the supfile if that doesn't really
work. And I can't find the docs on refuse files at the moment.
It works for
Quoting tech [EMAIL PROTECTED]:
how can i create image of audio cd in FreeBSD-5.0?
dd if=/dev/acd0 of=cdimage bs=1024 produce error - invalid argument.
with simple data cd dd works fine.
The handbook is your best friend :)
Have you tried mkisofs ?
If it doesn't work,
Hi,
A while ago I posted that I could not get my APC UPS BK350 to work under
FreeBSD 4.7R, using apcupsd. Problem was that, though apcupsd test prog sees
the power go off-line, the apcupsd daemon itself does not. :(
So, since I do need a solution, maybe I just need a smart UPS. I was
thinking of
--- Joe Marcus Clarke [EMAIL PROTECTED] wrote:
On Sun, 2003-02-23 at 19:41, Thanos Tsouanas wrote:
--- Joe Marcus Clarke [EMAIL PROTECTED] wrote:
On Sun, 2003-02-23 at 11:16, Thanos Tsouanas wrote:
--- Joe Marcus Clarke [EMAIL PROTECTED] wrote:
On Sun, 2003-02-23 at 07:04, Thanos
What are you doing on my home page?
Who are you and what does your satanic imagery refer to?
Harry Horse
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in the body of the message
Hi all...
OK, I am a little confused today.
On one of my servers, I did a cd /usr/src make update portsdb -Uu
pkgdb -Fvu, and some packages have strange stale dependencies...
Like for instance:
Stale dependency: horde-2.2.1_1 - python-2.2.2_2 (lang/python)...
In the horde2 Makefile, there's
Hi Giorgos,
First of all I have to admit that basically you are right. I *must*
avoid changing the xxx_program settings and it does not seem reasonable
(in FreeBSD 4.7) to include the flags into the xxx_program settings.
Flags should be into the xxx_flags settings.
But my old router was an
Hello,
I was wondering, is it safe to set the sunlnk flag on important system
files, such as /etc/master.passwd? Or /etc/spwd.db? Especially the latter I
am not sure about; maybe, internally, chpass or something similar, needs to
rebuild it (by unlinking it first)?
Thanks.
- Mark
To
Hi !
I am looking for someone who uses the HPIJS printer driver to help me out a
little bit with it.
The printing output is very poor quality on my printer, and I wanted to make
sure I didn't miss anything.
I used to use HPIJS under Cups and Linux and the quality was very very nice,
so I am
I'm trying to set up FreeBSD 4.7-RELEASE for a friend of mine, and he has
the Realtek RTL8139 NIC (for which the rl driver is the correct one as far
as I can tell). However, when booting up, the following appears:
rl0: couldn't map ports/memory
device_probe_attach returned 6
(migth be
On Sun, Feb 23, 2003 at 07:23:57PM -0500, John Straiton wrote:
Greets,
I have many times set up the authorized_keys so that remote
ssh/scp/rsync clients can connect between machines without a password.
However, in attempting to do this again using a 5.0-RELEASE machine
trying to connect
Luca Pizzinato [EMAIL PROTECTED] writes:
Hi Gurus.
I was setting up this box with FreeBSD 4.8 PRERELEASE. I cvsup'd and
recompiled everything, no problems, then I was configuring volumes with
vinum. The goal was to have 3 volumes mirrored 0+1.
Well, I attached the mirrors on all the 3
On Mon, Feb 24, 2003 at 01:15:21AM -0800, Kris Kennaway wrote:
On Sun, Feb 23, 2003 at 10:48:22PM -0500, taxman wrote:
So I guess I need to figure out how to use refuse files. I wonder why the
individual ports collections are listed in the supfile if that doesn't really
work. And
Jedd / Erickson D. Delgado, CIP, MCP
Phone No.: (632) 916 930-1058
ICQ No.: 49683189
FreeBSD Newbie - OpenSource Advocate
--
__
http://www.linuxmail.org/
Now with e-mail forwarding for
You need miibus support in the kernel, but that should be there anyway
in the GENERIC file. Other than that I have had no problems.
--
Regards
Cliff Sarginson
The Netherlands
Yup, miibus support has been there all along.
-Henrik,
FreeBSD newbie and fanatic :D
I have a RAID-5 array on /home via vinum. This morning, the
server (running 4.8-PRERELEASE, compiled last week) wouldn't allow anyone
to login via ssh, imap, or console. So I had someone reboot the server
via control-alt-delete. Then it said that not all processes would dia,
use ps axl.
Forgive me for getting
On Sat, 22 Feb 2003, Rik Scarborough wrote:
I'm having trouble getting several errors when compiling x0rfbserver.
Has anyone else gotten this to compile?
~Rik
On Thursday, February 20, 2003, at 05:46 PM, Rus Foster wrote:
On Thu, 20 Feb 2003, Rik Scarborough
Has anyone gotten GNUstep applications (beside Windowmaker) to work?
I'm trying to get GNUMail to work and it doesn't in many ways.
The first way is that openapp isn't in the path, so I have to use
the entire path at the command line.
The second way is that GNUSTEP_SYSTEM_ROOT has to be defined
Harry Horse wrote:
What are you doing on my home page?
Who are you and what does your satanic imagery refer to?
Harry Horse
Who are you and what are you talking about?
--
Bill Moran
Potential Technologies
http://www.potentialtech.com
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe
Hello list!
I am not able to compile the net/openh323proxy port version 0.9.12.
It starts with compilation of openh323 1.11.2_1 which is successful.
However, the following step generates an error:
=== Building for openh323proxy-0.9.12
gmake P_SHAREDLIB=0 opt
gmake[1]: Entering directory
On Feb 24, 2003, Kjell Midtseter wrote:
List members!
On my LAN I have a FreeBSD R4.7p4 workstation where I fetch
my mail for this list from my ISP using fetchmail, and reading
it with mutt.
After I switched from using sendmail to postfix I started getting messages on ttyv0
like:
Feb 23
Ack, gotta learn how to use this new-fangled email thing...
If you're looking more for Power Point functionailty with some remote
desktop functionality, look at magicpoint in ports.
On Mon, 24 Feb 2003, Joe O wrote:
Forgive me for getting
On Sat, 22 Feb 2003, Rik Scarborough wrote:
I'm
Hello,
I'm working on a script that will automate making shell accounts and I guess
I'm a bit stumped on how one enters the encrypted password into the deal.
If anyone knows any resources where I might find this kind of info or has
some suggestions for me it would be very much appreciated.
default013 wrote:
Hello,
I'm working on a script that will automate making shell accounts and I guess
I'm a bit stumped on how one enters the encrypted password into the deal.
If anyone knows any resources where I might find this kind of info or has
some suggestions for me it would be very much
On Mon, 24 Feb 2003 [EMAIL PROTECTED] wrote:
As I type, the server is in single user mode. The fsck commands
result in:
CAN NOT READ: BLK 16
Try starting vinum.
--
:{ [EMAIL PROTECTED]
Andy Farkas
System Administrator
Speednet Communications
In [EMAIL PROTECTED], Mark [EMAIL PROTECTED] typed:
A while ago I posted that I could not get my APC UPS BK350 to work under
FreeBSD 4.7R, using apcupsd. Problem was that, though apcupsd test prog sees
the power go off-line, the apcupsd daemon itself does not. :(
Try nut with the 350. I've got
Thanks for all the info! Regretibly, I'm still having problems...
My guess is that when you did your re-install you didn't
backup and restore the host keys for your machine. That
means that all of the accounts on systems you've been
connecting to will have the old host keys in the
As a follow up to my own post:
The only known_hosts file that exists on the machine is in
/root/.ssh/known_hosts which does not have a problem
connecting. So I figured rather than properly diagnose this,
I'd make it work again since I'm starting to run against time
constraints...too bad
Hi,
ok it's working now. Just in case someone wants to know, where the problem
was:
dnl set SASL options
TRUST_AUTH_MECH(`GSSAPI DIGEST-MD5 CRAM-MD5 LOGIN')dnl
define(`confAUTH_MECHANISMS', `GSSAPI DIGEST-MD5 CRAM-MD5 LOGIN')dnl
define(`confDEF_AUTH_INFO', `/etc/mail/auth-info')dnl
I
On Mon, 24 Feb 2003, default013 wrote:
I'm working on a script that will automate making shell accounts and I guess
I'm a bit stumped on how one enters the encrypted password into the deal.
If anyone knows any resources where I might find this kind of info or has
some suggestions for me it
Maybe has somebody idea : how to support the audigy
sound card on FreeBSD 4.7 ?
__
Do you Yahoo!?
Yahoo! Tax Center - forms, calculators, tips, more
http://taxes.yahoo.com/
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe
i have been trying to run the command : cd /usr/ports make index
it has been sitting at this point for over an hour, any suggestions?
[/usr/ports] make index
Generating INDEX - please wait..
any suggestions?
b
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions
On Mon, Feb 24, 2003 at 09:59:30AM -0600, Brian Henning wrote:
i have been trying to run the command : cd /usr/ports make index
it has been sitting at this point for over an hour, any suggestions?
[/usr/ports] make index
Generating INDEX - please wait..
any suggestions?
Yes - leave
On Tuesday 18 February 2003 17:04, Joe Marcus Clarke wrote:
On Tue, 2003-02-18 at 17:45, Eduardo Huertas wrote:
On Tuesday 18 February 2003 08:32, Eduardo Huertas wrote:
On Tuesday 18 February 2003 08:14, you wrote:
On Tue, 2003-02-18 at 08:59, Eduardo Huertas wrote:
Hi,
Hello.
I'm trying to upgrade a 4.5 machine to a 4.7 via sources.
When I make buildworld I get the following error:
c++ -O -pipe -D__FBSDID=__RCSID
-I/usr/src/gnu/usr.bin/gperf/../../../contrib/gperf/lib -I/usr/src/gnu/usr.bin/gperf
-c /usr/src/gnu/usr.bin/gperf/../../..
Hello-
i have a usb radio device that i would like to listen to in fbsd..
dmesg
ugen0: GemTek Corp USB FM Radio, rev 1.00/4.10, addr 2
i thought i read somewhere to try fmio supports that card, but i can't seem to
get it to work..
fmio -d /dev/ugen0
fmio: Invalid driver `/dev/ugen0', using
Howdy all,
I'm attempting to use a Toshiba TECRA 8000 running 5.0-release as the
firewall for my home network. It's running right now, but I'm seeing
some sketchy network behavior and I think it's one of the NICs.
Basically, when I'm doing something fairly network-intensive (like large
Just curious if anyone knows why the kernel source has references to both
perl5 as well as perl and if work is being done to make make the calls
to perl more standard e.g. using either perl or perl5 everywhere.
This isn't a problem but more of a one-time-annoyance. Right at the
beginning of
On Mon, Feb 24, 2003 at 11:10:33AM -0600, Sean O'Neill wrote:
Just curious if anyone knows why the kernel source has references to both
perl5 as well as perl and if work is being done to make make the calls
to perl more standard e.g. using either perl or perl5 everywhere.
This isn't a
Title: Chanintr exclusive Preview 01
WE
ARE PLEASED TO ANNOUNCE THAT OUR NEWEST SHIPMENT HAS ARRIVED. PLEASE BE
INVITED TO OUR EXCLUSIVE PREVIEW BETWEEN FEBRUARY 24 TILL MARCH 1, 2003.
AS BEING OUR PREFERRED CUSTOMERS, YOU WILL
I'm having a whole world of trouble with sendmail and apache, where
previously I've had none.
I added some new Mailman aliases to my /etc/aliases file and did 'make'.
The process took a very long time. I restarted sendmail. The changes did
not seem to take effect, so (stupidly) I remotely
http://www.opensound.com
David
Martynas P wrote:
Maybe has somebody idea : how to support the audigy
sound card on FreeBSD 4.7 ?
__
Do you Yahoo!?
Yahoo! Tax Center - forms, calculators, tips, more
http://taxes.yahoo.com/
To Unsubscribe: send mail
Maybe has somebody idea : how to support the audigy
sound card on FreeBSD 4.7 ?
I think someone is writing a FreeBSD driver right now, so if I were you I
would just wait... or ask the person his patch to make the Audigy works with
the emu10k1 driver. Unfortunately, I can't remember his
Phillip Smith (mailing list) wrote:
I'm having a whole world of trouble with sendmail and apache, where
previously I've had none.
I added some new Mailman aliases to my /etc/aliases file and did 'make'.
The process took a very long time. I restarted sendmail. The changes did
not seem to take
- Original Message -
From: Bill Moran [EMAIL PROTECTED]
Date: Mon, 24 Feb 2003 09:10:28 -0500
To: [EMAIL PROTECTED]
Subject: Re: No subject was specified.
Harry Horse wrote:
What are you doing on my home page?
Who are you and what does your satanic imagery refer to?
Harry Horse
Abel Alejandro wrote:
Hello, I have two interfaces. The rl0 is for monitoring purposes and fxp0 is
for normal internet access.
rl0 is attached to a catalyst port using SPAN, meaning all the traffic going
to the internet gets mirrored to
this port. fxp0 is on the same catalyst.
If I shutdown rl0
Hi all,
I've got a system on which quotas are active, but are not being
enforced.
- I built a kernel with options QUOTA
- I have enable_quotas=YES and check_quotas=YES in /etc/rc.conf
- I have userquota set on the device
- I rebooted
And yet this user:
/usr/home: blocks in use: 306098, limits
There are currently two patches for the Audigy sound cards.
http://chibis.persons.gfk.ru/audigy
and:
http://www.freebsd.org/cgi/getmsg.cgi?fetch=664373+686499+/usr/local/www/db/tex
t/2003/freebsd-hackers/20030216.freebsd-hackers+raw
Each patch has it's merits. The author of the latter,
It worked with a netmask of 255.255.255.0
Thanks.
- Original Message -
From: Daniel Schrock [EMAIL PROTECTED]
To: Abel Alejandro [EMAIL PROTECTED]; [EMAIL PROTECTED]
Sent: Monday, February 24, 2003 3:12 PM
Subject: Re: cant get out with two interfaces.
Abel Alejandro wrote:
Hello, I
Your card's resources are turned off. Use your computer's
BIOS/CMOS/whatever
configuration program to activate resources on the card.
Don
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in the body of the message
On 2003-02-23 14:51, Lowell Gilbert [EMAIL PROTECTED] wrote:
David Bear [EMAIL PROTECTED] writes:
sorry for the offtopic post here but I cant seem to get my procmail
recipe's to fire. I know sendmail sees and uses procmail because
maillog show its handing it of to procmail. Also, the mail
On 2003-02-23 12:20, [EMAIL PROTECTED] wrote:
This thread really needs to end on this list, but I am going to
respond to the below email to this list since it was sent to this
list. [...] If you know why the cvsup example that was used was,
then please email me directly, not the list.
I'll
On 2003-02-24 18:39, Sam Izzo [EMAIL PROTECTED] wrote:
Most of the GNU tools are better documented in the info pages, as
they consider man pages legacy. info ld might turn up more
detailed info.
You know, I've read/heard that many times over the years, but
whenever I look at the info page
On Mon, Feb 24, 2003 at 12:42:45PM +0100, Cliff Sarginson wrote:
On Mon, Feb 24, 2003 at 01:15:21AM -0800, Kris Kennaway wrote:
On Sun, Feb 23, 2003 at 10:48:22PM -0500, taxman wrote:
So I guess I need to figure out how to use refuse files. I wonder why the
individual ports
On Mon, Feb 24, 2003 at 07:18:46AM -0600, James McNaughton wrote:
Has anyone gotten GNUstep applications (beside Windowmaker) to work?
I'm trying to get GNUMail to work and it doesn't in many ways.
The first way is that openapp isn't in the path, so I have to use
the entire path at the
setenv DISPLAY ipaddr:0.0
what are the display number and screen number used for?
how do i know what number to use for the display number and screen number?
for example when i tunnel x11 through ssh for a user i use :10.0
when i access x11 on the same network i use :0.0
thanks for any help,
taxman [EMAIL PROTECTED] writes:
Hi, I can't figure this one out, I have already installed a custom kernel on
this sytem and now I'm trying to make a new one. It build fine, but
intallkernel fails with:
install -o root -g wheel -m 555 joy.ko /modules
install -o root -g wheel -m 444
On Mon, Feb 24, 2003 at 09:48:08PM +0200, Giorgos Keramidas wrote:
On 2003-02-24 18:39, Sam Izzo [EMAIL PROTECTED] wrote:
Most of the GNU tools are better documented in the info pages, as
they consider man pages legacy. info ld might turn up more
detailed info.
You know, I've
tech [EMAIL PROTECTED] writes:
how can i create image of audio cd in FreeBSD-5.0?
dd if=/dev/acd0 of=cdimage bs=1024 produce error - invalid argument.
with simple data cd dd works fine.
An audio CD is different; it doesn't have a filesystem per se.
The manual page for
On Thu, 20 Feb 2003, northern snowfall wrote:
Well... all ATA in freebsd are pretty much conglomerated into the same
driver... but, the problem isn't really so much the ATA as it is that
the ATA expects a PM telling it what to do. Since this is something that
must be done via the hardware at
I've been automating some routine stuff on my machine and one of them is
cvsuping ports-all and pulling the distfiles overnight (while everybody
is asleep.) Keeping portupgrade right up to date feels like the right
thing to do and I was thinking about adding this to the shell script I'm
+ Tom Parquette wrote:
| I've been automating some routine stuff on my machine and one of them is
| cvsuping ports-all and pulling the distfiles overnight (while everybody
| is asleep.) Keeping portupgrade right up to date feels like the right
| thing to do and I was thinking about adding
If the extra hacking was done, what would be wrong with that occurring at
the end of the reboot process, rather than the start of the boot process?
It probably wouldn't *hurt* anything, though, it wouldn't *do* anything,
either.
When power cycles the ATA will initialize to the native state.
how can one extract the gziped patch from that second link?
Orion Hodson wrote:
There are currently two patches for the Audigy sound cards.
http://chibis.persons.gfk.ru/audigy
and:
http://www.freebsd.org/cgi/getmsg.cgi?fetch=664373+686499+/usr/local/www/db/tex
Hello everyone, does anyone know of a web interface package to setup firewall rules
(with ipf or ipfw) through a web browser? I've seen plenty of costly packages and
also unfinished open source packages, but nothing complete.
Thanks in advance,
---
Joe Glass
Michigan State University
Core
On Mon, 24 Feb 2003, northern snowfall wrote:
If the extra hacking was done, what would be wrong with that occurring at
the end of the reboot process, rather than the start of the boot process?
It probably wouldn't *hurt* anything, though, it wouldn't *do* anything,
either. When power
On Mon, 24 Feb 2003 [EMAIL PROTECTED] wrote:
I see. However, good news I appear to have solved this by adding
hw.ata.ata_dma=0
to /boot/loader.conf
Gah. Correction: that was either a fluke, the problem is intermittent, or
I hit the reset button without thinking and through it had worked.
On Mon, 24 Feb 2003, David Cramblett wrote:
how can one extract the gziped patch from that second link?
Orion Hodson wrote:
There are currently two patches for the Audigy sound cards.
http://chibis.persons.gfk.ru/audigy
and:
Gah. Correction: that was either a fluke, the problem is intermittent, or
I hit the reset button without thinking and through it had worked.
Probabbly the last option. More caffeine please.
Damn... I was hoping that worked..
Don
To Unsubscribe: send mail to [EMAIL PROTECTED]
with
Hi!
Has anyone got this scanner to work with FreeBSD 4.7 and SANE?
When issued sane-find-scanner it finds it, telling me it's on
libusb:/dev/usb0:/dev/ugen0.
It also seems to use the backend Plustek, and in the [usb]
section I have entered the correct vendor- and product-id.
I have tried various
I normally update my ports tree by running cvsup, portsdb -Uu, pkgdb -F,
then portversion |grep . I also have a jail that has its own ports
tree. On the host system, when running portsdb -Uu, I am getting the
following that I dont understand:
portsdb -Uu
Updating the ports index ...
Hi !
I need to create a network serving virtual web hosting (which I'll have 2 public ip's)
with these servers: apache, iis, bind, ftpd, sendmail and pop3.
It's possible to put all these servers (including the dns) behind a freebsd
firewall/nat with 2 nics and 2 switchs to divide 2 networks ?
Hi All.
I have here a couple of FreeBSD boxes with a USB to serial RS232 cable
going from USB0 on hostA to COM1 on hostB.
On hostA I recompiled the kernel incuding the following 2 lines:
# USB com devices
device ucom
device uplcom
Unplugging and plugging back in on hostA the
In [EMAIL PROTECTED], Brian Henning [EMAIL PROTECTED] typed:
setenv DISPLAY ipaddr:0.0
what are the display number and screen number used for?
The display number denotes which X server at ipaddr you're going to
talk to. It's basically added to 6000 to get a port number to connect
to. If I start
David Cramblett wrote:
| how can one extract the gziped patch from that second link?
Use fetch to get the link as a raw text file, eg:
$ fetch -o audigy-email.raw 'http://www.freebsd.org/cgi/getmsg.cgi?fetch=664373
+686499+/usr/local/www/db/text/2003/freebsd-hackers/20030216.freebsd-hackers+ra
On 2003-02-24 21:28, Cliff Sarginson [EMAIL PROTECTED] wrote:
On Mon, Feb 24, 2003 at 09:48:08PM +0200, Giorgos Keramidas wrote:
GNU people do hate manpages annd avoid them some times :(
Navigating info pages is like having teeth pulled without novocaine.
Well, that's a bit of an
On hostA I recompiled the kernel incuding the following 2 lines:
# USB com devices
device ucom
device uplcom
Unplugging and plugging back in on hostA the USB end, this is what I get
on the messages file:
... hostA /kernel: uplcom0: at uhub0 port 2 (addr 2) disconnected
Hello,
Sorry if I'm missing something really basic here, but I've
installed FreeBSD on a new box here with two brand new nics:
Intel Pro100S
3COM OfficeConnect (3CSOHO100B)
At installation, I had the Intel (fxp0) connected to the switch, and it
was configured during the sysinstall stage.
Can you run Oracle on FreeBSD?
So far I've found some information on installing Oracle using Linux
emulation but nothing about running it in native mode.
Also, if any of you feel that running Oracle on FreeBSD is a bad idea
let me know.
To Unsubscribe: send mail to [EMAIL PROTECTED]
with
Hi,
Whenever I attempt to attach my digital camera on my work computer, I get the
afformetioned error, this error occurs when I plug my device into any usb
port on my computer:
Feb 21 15:02:46 elkanah /kernel: uhub1: device problem, disabling port 2
Has anyone else ever had this problem, how
On Mon, Feb 24, 2003 at 05:48:55PM -0500, Michael Sharp wrote:
I normally update my ports tree by running cvsup, portsdb -Uu, pkgdb -F,
then portversion |grep . I also have a jail that has its own ports
tree. On the host system, when running portsdb -Uu, I am getting the
following that I
Quoting Stacey Roberts [EMAIL PROTECTED]:
Intel Pro100S
3COM OfficeConnect (3CSOHO100B)
At installation, I had the Intel (fxp0) connected to the switch, and it
was configured during the sysinstall stage. However, the 3COM nic never
showed up after installation in dmesg (as far as I can
Quoting Daxbert [EMAIL PROTECTED]:
Quoting Stacey Roberts [EMAIL PROTECTED]:
Intel Pro100S
3COM OfficeConnect (3CSOHO100B)
At installation, I had the Intel (fxp0) connected to the switch, and it
was configured during the sysinstall stage. However, the 3COM nic never
showed up
Hi,
On Mon, 2003-02-24 at 23:35, Daxbert wrote:
Quoting Stacey Roberts [EMAIL PROTECTED]:
Intel Pro100S
3COM OfficeConnect (3CSOHO100B)
At installation, I had the Intel (fxp0) connected to the switch, and it
was configured during the sysinstall stage. However, the 3COM nic never
hello-
what is the difference between these two devices?
thanks,
brian
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in the body of the message
Quoting Stacey Roberts [EMAIL PROTECTED]:
On Mon, 2003-02-24 at 23:35, Daxbert wrote:
Quoting Stacey Roberts [EMAIL PROTECTED]:
Intel Pro100S
3COM OfficeConnect (3CSOHO100B)
At installation, I had the Intel (fxp0) connected to the switch, and it
was configured during the
Quoting Stacey Roberts [EMAIL PROTECTED]:
On Mon, 2003-02-24 at 23:35, Daxbert wrote:
Quoting Stacey Roberts [EMAIL PROTECTED]:
Intel Pro100S
3COM OfficeConnect (3CSOHO100B)
At installation, I had the Intel (fxp0) connected to the switch, and it
was configured during the
Hi,
On Tue, 2003-02-25 at 00:07, Daxbert wrote:
Quoting Stacey Roberts [EMAIL PROTECTED]:
snipped
I was just doing a search around FreeBSD tech sites and actually, this
*specific* nic - 3CSOHO100B-TX isn't actually listed. What *is* listed
in the Handbook is:
3cSOHO100-TX
Since we only had one ATA133 disk on each TX2000 ATA channel, we skipped
the TX2000 setup utility to define an array (we didn't want to run RAID
or want any stinking arrays at all).
We were able to boot from mobo ATA CDROM and install fbsd through the TX2000.
( btw, we always install fbsd boot
Hi,
On Tue, 2003-02-25 at 00:07, Daxbert wrote:
Quoting Stacey Roberts [EMAIL PROTECTED]:
On Mon, 2003-02-24 at 23:35, Daxbert wrote:
Quoting Stacey Roberts [EMAIL PROTECTED]:
Intel Pro100S
3COM OfficeConnect (3CSOHO100B)
At installation, I had the Intel (fxp0)
When will FreeBSD 4.8 release?
It was declared 01.02.2003, but ...
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in the body of the message
On Mon, Feb 24, 2003 at 09:40:27AM +0100, Miguel Mendez wrote:
Being a curious person myself I cvs co'd the OpenPTC thing to try it
here. I've tried it on a NetBSD box, but the procedure to build it on
FreeBSD should be similar.
Hey great, thanks for that! You didn't have to do that :-) I
I'm going to be setting up a virtual mail server using Postfix,
OpenLDAP, Jamm and courier IMAP. Is there a way to limit the number of
accounts each domain can have?
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in the body of the message
On 2003-02-25 04:37, demon [EMAIL PROTECTED] wrote:
When will FreeBSD 4.8 release?
It was declared 01.02.2003, but ...
http://www.freebsd.org/releng/index.html is your friend.
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in the body of the message
I have been playing with Vinum and my first serious experiment resulted
in a serious failure. I am not sure if my hard drive just chose this
moment to fail or if it is a configuration problem but I can't seem to
do anything with the drive anymore:
I have a 40 G IBM drive that I have not really
it's not a bad idea, it'd be great if oracle created a port for bsd, but
they didn't and most likely won't. you can't run in in native mode,
because ... well... it's bsd, not linux. i don't think you'll have issues
with emulation mode,. except for performance, which could be pretty big.
I
Is there anything in FreeBSD or the ports that will collect statistics
similar to those displayed by systat and drop them to a flat file ?
--
. ..- -. .. -..- .-. ..- .-.. . ...
.-- .. -. -... .-.. --- .-- ... -.. .-.
1 - 100 of 118 matches
Mail list logo
