Using pccardd worked. There is an entry for the 3Com Megahertz 589E in
/etc/defaults/pccard.conf. As the 7500 has a built-in sound card, I tried
removing irq 5 from the irq pool. However doing that causes the boot to hang
after:
ppi0: Parallel I/O on ppbus0
I get a similar hang during startup
Hi there,
Recently, Samba has started to take about 30secs to start
on system boot. Output to console says:
...
SambaStarting
...
The 30 (or more) second break takes place between the
Samba and Starting output. What could this be?, it
never used to take so long.
I have recently upgraded to
On Mon, 2004-05-17 at 10:48, Gareth Bailey wrote:
Hi there,
Recently, Samba has started to take about 30secs to start
on system boot. Output to console says:
...
SambaStarting
...
The 30 (or more) second break takes place between the
Samba and Starting output. What could this be?, it
I stopped samba using samba.sh stop, then started it again
with samba.sh start. You are correct as far as the output
goes, only Samba is written to console. But Samba took 30
- 40 seconds to load! It seems Samba is actually causing
the pause.
Why would this be?
Thanks
Gareth
On Mon, 17 May 2004
On Mon, 2004-05-17 at 11:56, Gareth Bailey wrote:
I stopped samba using samba.sh stop, then started it again
with samba.sh start. You are correct as far as the output
goes, only Samba is written to console. But Samba took 30
- 40 seconds to load! It seems Samba is actually causing
the pause.
Aah! Thanks for pointing me in the right direction. In
debug mode the problem was revealed:
Unable to connect to CUPS server localhost - Operation
timed out
Cheers,
Gareth
On Mon, 17 May 2004 12:30:56 +0200
Nelis Lamprecht [EMAIL PROTECTED] wrote:
On Mon, 2004-05-17 at 11:56, Gareth Bailey
I have just installed IPFILTER as a replacement for IPFW.
All is great besides the fact that ipf logs are being
stored not only in /etc/security, but also /etc/messages. I
don't want ipf logs in /etc/messages.
In rc.conf, after enabling ipfilter i have the following
lines:
ipmon_enable=YES
On Monday 17 May 2004 06:17, Phil Thomson wrote:
Hi all,
I am a relative newbie to UNIX, going from being an ex-Windows user
to being an X Windows user! ;-) I recently got FreeBSD installed on
an older PC with a 3 GB drive and a 5 GB drive (which has not yet
been mounted). The system is
HI folks,
I tried to solve following questions on creating ISO
image with reference to 'man mkisofs' but could not
resolve;
Tree of diectories e.g.
/usr/home/user-A/document-AAA/subdirectories
1) To include the complete tree starting from
/user-A/document-AAA/subdirectories
2) To include the
Changes to /etc/syslog.conf do not take effect until you tell the
syslog task to re-read the conf file. You do that be issuing an HUP
signal to the syslog task. Kill -HUP PID where PID is the task
number from the ps ax command.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL
On Mon, May 17, 2004 at 01:10:23PM +0800, Stephen Liu wrote:
Which file shall I re-configure to authorize 'User-A'
using 'burncd' to burn CD and how to edit it.
/usr/local/etc/sudoers would be a good file to use to set up that sort
of thing. You will have to install the security/sudo port and
Hi there, thanks for the sample rules and help in setting
up IPF.
I have restarted since making the changes to syslogd.conf.
I HUP'd syslogd anyway, still no luck. All ipf logs go to
security and messages!
Can you think of anything else that i might do?
Thanks
Gareth
On Mon, 17 May 2004
On Mon, 2004-05-17 at 13:53, Gareth Bailey wrote:
Hi there, thanks for the sample rules and help in setting
up IPF.
I have restarted since making the changes to syslogd.conf.
I HUP'd syslogd anyway, still no luck. All ipf logs go to
security and messages!
Can you think of anything else
Dan Nelson wrote:
In the last episode (May 16), Eric Anderson said:
I have a few large NFS file servers, holding about 1Tb of diskspace
each. I break those logical disks (it's on a hardware RAID) into
partitions, and share them. My users fill up the partitions often
enough, and when they do,
Has there been any new work on the installer or planned? If not, I would like to
help... What about graphical?
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL
On Mon, 2004-05-17 at 05:04, Eric Anderson wrote:
The problem I'm having is, after they do the rm's, it doesn't free the
disk space. df shows it still being used, but du claims their
directories are empty.
Please see
Hi Matthew,
Tks for your advice.
Which file shall I re-configure to authorize
'User-A'
using 'burncd' to burn CD and how to edit it.
/usr/local/etc/sudoers would be a good file to use
to set up that sort
of thing.
Noted with thanks
I only expect to allow 'User-A', not all users, to
Hello dear developments,
I have FreeBSD 5.2.1 release + bridge and ipfw.
I am a filter on interface (rl0 our net - all allow, rl1 - filtered)
If I enabled net.link.ether.bridge.ipfw=1, that firewall works only
local.
Needs filtering the bridge if I filter interfaces?
Sample: (81.89.68.130 -
You will have to install the
security/sudo port and read up
on the sudoers(5) manual page and the visudo(8)
application used to
edit that file.
What do these numbers (5) and (8) referring to. Page
number?
They refer to the section of the manual. To read them, issue these commands:
man 5 sudoers
Your solution of not using the syslog function does not answer his
question. This is bad advice.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Nelis
Lamprecht
Sent: Monday, May 17, 2004 7:57 AM
To: Gareth Bailey
Cc: [EMAIL PROTECTED]
Subject: Re: ipmon
On Saturday 15 May 2004 18:56, JJB wrote:
You are wrong also. The boot time message that displays about the
ipfw module being loaded is incorrect. I filed an PR on that in 5.1
and was told by developers that message is misleading, that the
module is fully enabled with nat and logging, so I
On Mon, May 17, 2004 at 01:21:44PM +0200, platanthera typed:
On Monday 17 May 2004 06:17, Phil Thomson wrote:
Hi all,
I am a relative newbie to UNIX, going from being an ex-Windows user
to being an X Windows user! ;-) I recently got FreeBSD installed on
an older PC with a 3 GB drive and
On Mon, 2004-05-17 at 14:11, JJB wrote:
Your solution of not using the syslog function does not answer his
question. This is bad advice.
Quoted Can you think of anything else that i might do?
and answered:
Rather use:
ipmon_flags=-Dn /var/log/security
This is not bad advice, I was
Stephen Liu [EMAIL PROTECTED] writes:
What I expect to change is to allow User-A
$ su
password : using his own password instead of 'root
password'
That's exactly what sudo is good for.
You will have to install the
security/sudo port and read up
on the sudoers(5) manual page and the
On Monday 17 May 2004 14:41, Ruben de Groot wrote:
On Mon, May 17, 2004 at 01:21:44PM +0200, platanthera typed:
On Monday 17 May 2004 06:17, Phil Thomson wrote:
Hi all,
I am a relative newbie to UNIX, going from being an ex-Windows
user to being an X Windows user! ;-) I recently got
On Mon, 17 May 2004, Stephen Liu wrote:
HI folks,
I tried to solve following questions on creating ISO
image with reference to 'man mkisofs' but could not
resolve;
Take a look at /usr/share/examples/worm/makecdfs.sh
It's a shell script the FreeBSD team uses for making the FreeBSD ISOs
On Mon, May 17, 2004 at 08:16:30PM +0800, Stephen Liu wrote:
What do these numbers (5) and (8) referring to. Page
number?
Section of the user manual, where (1) is user commands, (2) is system
calls, (3) is C api, (4) is kernel devices, (5) is configuration
file formats, (6) and (7) are not
Im trying to run a SLIP server off a pic 16f819. My FreeBSD setup seems
to be sending TCP headers. However I set my pic to receive IP headers.
Somebody told me they were the same, but according the IEEE and a
couple rfc documents they are not the same in terms of what is sent and
how it is
Now wouldn't it just be better all the way around to create the IPFW
loadable module that is distributed with the system, with the
correct divert and logging options so it's not an mandatory
requirement to compile the kernel. Why make this so difficult for
the normal user?. Simpler and easier is
On Mon, May 17, 2004 at 01:00:37AM -0500, [EMAIL PROTECTED] wrote:
Has there been any new work on the installer or planned? If not, I would like to
help... What about graphical?
There's been plenty of planning and various projects to produce
something better, but to the best of my knowledge
Nelis Lamprecht wrote:
On Mon, 2004-05-17 at 05:04, Eric Anderson wrote:
The problem I'm having is, after they do the rm's, it doesn't free the
disk space. df shows it still being used, but du claims their
directories are empty.
Please see
Hi!!
I want use openssl but I don't find the directory where I can create my
authority of certification (in this directory we can find scripts to
allow the automation of the command of openssl). I have read that it is
in /usr/local/openssl/misc but I haven't this directory (I have freebsd
Nelis Lamprecht wrote:
On Mon, 2004-05-17 at 05:04, Eric Anderson wrote:
The problem I'm having is, after they do the rm's, it doesn't free the
disk space. df shows it still being used, but du claims their
directories are empty.
Please see
Thanks for the advice ;-), changing the ipmon_flags did the
trick.
Regards,
Gareth
On Mon, 17 May 2004 14:39:44 +0200
Nelis Lamprecht [EMAIL PROTECTED] wrote:
On Mon, 2004-05-17 at 14:11, JJB wrote:
Your solution of not using the syslog function does not
answer his
question. This is bad
Jerry McAllister wrote:
Nelis Lamprecht wrote:
On Mon, 2004-05-17 at 05:04, Eric Anderson wrote:
The problem I'm having is, after they do the rm's, it doesn't free the
disk space. df shows it still being used, but du claims their
directories are empty.
Please see
Hi,
I'm trying to clean things up after a 'build world'. mergemaster created a
directory named empty, with permissions:
dr-xr-xr-x 2 root wheel 512 Feb 22 01:07 empty/
- what's this directory for? It also appears in /var.
- How to delete the directory? Not even root can change those
On Mon, May 17, 2004 at 03:59:09PM +0200, Frans Jaspers wrote:
Hi,
I'm trying to clean things up after a 'build world'. mergemaster created a
directory named empty, with permissions:
dr-xr-xr-x 2 root wheel 512 Feb 22 01:07 empty/
- what's this directory for? It also appears in /var.
im guessing this is what you mean ?
mkisofs -r -J -o cd_image.iso dir/
arden
On Mon, 2004-05-17 at 12:28, Stephen Liu wrote:
HI folks,
I tried to solve following questions on creating ISO
image with reference to 'man mkisofs' but could not
resolve;
Tree of diectories e.g.
On Mon, 2004-05-17 at 15:42, xavier collot wrote:
Hi!!
I want use openssl but I don't find the directory where I can create my
authority of certification (in this directory we can find scripts to
allow the automation of the command of openssl). I have read that it is
in
hi all
has bit torrent been ported to bsd i use btdownloadcurses.py
under linux at the mo
arden
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
I have a box that is rebooting every 24 hrs, (cron job problem causing a kernel panic,
I think)
details FreeBSD 4.10-PRERELEASE #0: Fri May 14 14:23:47 CDT 2004
I did a cvsup from 4.9, that was working fine, a week ago and the panics started,
waited a week and
did cvsup again thinking a fix
On Mon, May 17, 2004 at 03:30:04PM +0100, arden wrote:
has bit torrent been ported to bsd i use btdownloadcurses.py
under linux at the mo
fx voice=obi wan
Use the ports, Luke!
/fx
% cd /usr/ports
% make search key=bittorrent | grep Port:
Port: bnbt-7.5b2
Port:
On Mon, 2004-05-17 at 15:30 +0100, arden wrote:
hi all
has bit torrent been ported to bsd i use btdownloadcurses.py
under linux at the mo
See under your ports dir:
net/py-bittorrent
signature.asc
Description: This is a digitally signed message part
In the last episode (May 17), Eric Anderson said:
Dan Nelson wrote:
In the last episode (May 16), Eric Anderson said:
I have a few large NFS file servers, holding about 1Tb of diskspace
each. I break those logical disks (it's on a hardware RAID) into
partitions, and share them. My users
platanthera writes:
you could (and definitely should) have a separate slice for /tmp
and eventually another one for /home too.
May I ask your logic here? Is this about safety, convenience,
overcrowding?
Robert Huff
I've learned a little about regular expressions and am trying to use
them with grep. I want to parse my httpd log to return entries that
contain a particular IP address and file ending in .htm or .html. I
want to match lines like this one:
123.456.789.123 - - [17/May/2004:06:54:53 -0700] GET
hi all
im pretty new to bsd so sorry if this is a stupid question
on my linux system i use kde as default desktop and as such when i type
startx kde starts
on bsd i get an xterm the have to type startkde after startx
is there a way to do it in one command?
Yes, put
exec
Jerry McAllister wrote:
Nelis Lamprecht wrote:
On Mon, 2004-05-17 at 05:04, Eric Anderson wrote:
The problem I'm having is, after they do the rm's, it doesn't free the
disk space. df shows it still being used, but du claims their
directories are empty.
Please see
On Mon, May 17, 2004 at 08:13:41AM -0700, Drew Tomlinson wrote:
I've learned a little about regular expressions and am trying to use
them with grep. I want to parse my httpd log to return entries that
contain a particular IP address and file ending in .htm or .html. I
want to match lines
Hello,
Moreover I have an other problem: I can't install racoon.
When I want to make the installation there is an error 1.
You will have to be more specific here and provide us with a little more
information.
Did you install '
IPSEC
IPSEC_ESP
'
in your kernel config? and rebuilded your kernel?
Hi arden,
Tks for your advice.
im guessing this is what you mean ?
mkisofs -r -J -o cd_image.iso dir/
I made following test without result;
$ mkisofs -r -J -o cd_image.iso
/usr/home/user-A/Storage-040517
...
...
mkisofs: Joliet tree sort failed.
The result I expect to have is
Hi Fernando,
Tks for your advice.
I tried to solve following questions on creating
ISO
image with reference to 'man mkisofs' but could
not
resolve;
Take a look at /usr/share/examples/worm/makecdfs.sh
It's a shell script the FreeBSD team uses for making
the FreeBSD ISOs
I read the
On Sat, 15 May 2004 20:13:15 +0100
Ben Paley [EMAIL PROTECTED] wrote:
Hello,
Anyone know anything about digital video cameras and freebsd? I've got
usb but no firewire. What might be a good choice? And what editing
software should I be looking at? Is there something in the ports that
On 5/17/2004 8:36 AM Erik Trulsson wrote:
On Mon, May 17, 2004 at 08:13:41AM -0700, Drew Tomlinson wrote:
I've learned a little about regular expressions and am trying to use
them with grep. I want to parse my httpd log to return entries that
contain a particular IP address and file ending
I just got a new server up and running and need it to send mail. The
rc.conf file has sendmail_enable=YES and it does start when the
system boots up. I can, as root, send a message direct from the command
line and it is sent successfully. But when I try to have a message sent
from a web page it
On Mon, 17 May 2004 13:10:23 +0800 (CST)
Stephen Liu [EMAIL PROTECTED] wrote:
Hi folks,
Which file shall I re-configure to authorize 'User-A'
using 'burncd' to burn CD and how to edit it.
What I would do is create named cdrw or what ever. Chmod that device
to readable and writable by that
On Mon, 17 May 2004 19:16:20 +0300
Adrian Pircalabu [EMAIL PROTECTED] wrote:
On Sat, 15 May 2004 20:13:15 +0100
Ben Paley [EMAIL PROTECTED] wrote:
Hello,
Anyone know anything about digital video cameras and freebsd? I've
got usb but no firewire. What might be a good choice? And what
If one were to *not* use the installer to setup a FreeBSD system, (aka,
like *old* dos, each step done manually), what are the manual steps
involved?
Matthew Seaman wrote:
On Mon, May 17, 2004 at 01:00:37AM -0500, [EMAIL PROTECTED] wrote:
Has there been any new work on the installer or planned?
On Mon, 17 May 2004 09:34:15 -0500
Vulpes Velox [EMAIL PROTECTED] wrote:
On Mon, 17 May 2004 19:16:20 +0300
Adrian Pircalabu [EMAIL PROTECTED] wrote:
On Sat, 15 May 2004 20:13:15 +0100
Ben Paley [EMAIL PROTECTED] wrote:
Hello,
Anyone know anything about digital video cameras
Is it possible to manually run an rcNG-style script with app_enable=NO
in /etc/rc.conf?
For instance, there are a few services that I don't want running all the
time on my laptop (like Apache, Squid, DansGuardian) but that I need
running now and then for development / testing purposes. As
On Monday 17 May 2004 18:51, Freddie Cash wrote:
Is it possible to manually run an rcNG-style script with app_enable=NO
in /etc/rc.conf?
For instance, there are a few services that I don't want running all the
time on my laptop (like Apache, Squid, DansGuardian) but that I need
running now
On May 17, 2004 09:56 am, Antoine Jacoutot wrote:
On Monday 17 May 2004 18:51, Freddie Cash wrote:
Is it possible to manually run an rcNG-style script with
app_enable=NO in /etc/rc.conf?
For instance, there are a few services that I don't want running
all the time on my laptop (like
On Mon, May 17, 2004 at 12:38:55PM +, slave-mike wrote:
If one were to *not* use the installer to setup a FreeBSD system, (aka,
like *old* dos, each step done manually), what are the manual steps
involved?
It's not something that I have at my finger-tips, as there's generally
no need to
There are no knobs in rc.conf for the applications you mentioned.
Rc.conf does not have internal check to verify you have correct
statements. So having apache_enable=YES in rc.conf does nothing
and issues no error message telling you it is invalid. All ports
are started from /usr/local/etc/rc.d/
In the last episode (May 17), Freddie Cash said:
Is it possible to manually run an rcNG-style script with
app_enable=NO in /etc/rc.conf?
For instance, there are a few services that I don't want running all
the time on my laptop (like Apache, Squid, DansGuardian) but that I
need running now
Adrian Pircalabu wrote:
On Sat, 15 May 2004 20:13:15 +0100
Ben Paley [EMAIL PROTECTED] wrote:
Hello,
Anyone know anything about digital video cameras and freebsd? I've got
usb but no firewire. What might be a good choice? And what editing
software should I be looking at? Is there something in the
On Mon, 17 May 2004 13:28:37 -0400
Clint Gilders [EMAIL PROTECTED] wrote:
Adrian Pircalabu wrote:
[...]
You'll notice that the oringal poster says digital video. Everyone
is talking about flash cards, the Gimp, and DIGITAL STILL cameras etc.
Easy enough mistake to make.
If this is the
Dan Nelson wrote:
In the last episode (May 17), Freddie Cash said:
Is it possible to manually run an rcNG-style script with
app_enable=NO in /etc/rc.conf?
For instance, there are a few services that I don't want running all
the time on my laptop (like Apache, Squid, DansGuardian) but that I
In the last episode (May 17), Peter Risdon said:
In similar situations, I change
/usr/local/etc/rc.d/whatever.sh
to
/usr/local/etc/rc.d/whatever.sh.notnow
(or any other suffix) so it doesn't start at boot time, then start it
up when I want with
On May 17, 2004 10:16 am, JJB wrote:
There are no knobs in rc.conf for the applications you mentioned.
Rc.conf does not have internal check to verify you have correct
statements. So having apache_enable=YES in rc.conf does nothing
and issues no error message telling you it is invalid. All
A day or so ago I asked someone for some clues on setting
up the sendmail mail-filter, milter. As usual, less than
ten minutes later google found what I was looking for on the web.
( ... )
I've just installed the mail/antivirus-milter; it looks
On May 17, 2004, at 11:53 AM, Freddie Cash wrote:
RCng scripts require an entry in /etc/rc.conf along the lines of
appname_enable=YES otherwise the script will fail to do anything.
As an aside, you may want to use /etc/rc.conf.local instead.
on a related note:
One problem is that it appears that
Greetings,
I was running a portupgrade -a this morning on my 5.2.1-RELEASE system on a freshly
cvsup'd ports tree. The first hint of trouble was gtk-2.4.1 failed to upgrade from
2.4.0...
-- gtk+-2.4.1.tar.bz2 doesn't seem to exist in /usr/ports/distfiles/gnome2.
Attempting to fetch from
On Tue, 18 May 2004, Stephen Liu wrote:
Hi Fernando,
Tks for your advice.
I read the file 'makecdfs.sh' and
/usr/share/examples/worm/Readme. The latter explains
the use of
burncd.sh mybigtestimage dummy
But I could not discover the 'Readme' for
'makecdfs.sh' explaining how to use it
Anyone have mtools working on a remote FreeBSD terminal?
I run floppyd on the terminal, but when I try to connect I get
a message ...
No Recv packet
I also tried one of the alternate forms of starting the server
but I get a strange error message ...
#floppyd -d /dev/fd0 gu4:0
Ignoring extra
On Monday 17 May 2004 11:39 am, Doug Poland wrote:
Greetings,
I was running a portupgrade -a this morning on my 5.2.1-RELEASE
system on a freshly cvsup'd ports tree. The first hint of trouble
was gtk-2.4.1 failed to upgrade from 2.4.0...
You need to visit
Hi Kris,
Thanks for the answer. Sorry, I was busy the last mounths.
* Kris Kennaway schrieb am 08 Mar 2004:
On Mon, Mar 08, 2004 at 01:03:47PM +0100, Soeren Mindorf wrote:
I change to 5.2/src and start the build:
make -DNO_KERBEROS TARGET_ARCH=sparc64 buildworld
That is correct.
Fine. ;)
Kent Stewart said:
On Monday 17 May 2004 11:39 am, Doug Poland wrote:
Greetings,
I was running a portupgrade -a this morning on my 5.2.1-RELEASE
system on a freshly cvsup'd ports tree. The first hint of trouble
was gtk-2.4.1 failed to upgrade from 2.4.0...
You need to visit
Hi gurus,
I don't know wether this problem have come up beore, so here it goes...
After a fresh installing and rebooting, the sendmail takes around 1 min and
10 sec to load. Then everytime it starts up, it takes the same amount of
time to load. Is that normal? The hardware is a PIII 500 with
On Monday 17 May 2004 11:58 am, Doug Poland wrote:
Kent Stewart said:
On Monday 17 May 2004 11:39 am, Doug Poland wrote:
Greetings,
I was running a portupgrade -a this morning on my 5.2.1-RELEASE
system on a freshly cvsup'd ports tree. The first hint of trouble
was gtk-2.4.1 failed
This is an automatically generated message.
Your email message to this domain included an executable attachment and was
rejected. Please resend your email without the executable. If you are
unsure why you are receiving this message, it is possibly due to a spoofed
email from your address
On Monday 17 May 2004 19:40, [EMAIL PROTECTED] wrote:
Adrian Pircalabu wrote:
You'll notice that the oringal poster says digital video. Everyone is
talking about flash cards, the Gimp, and DIGITAL STILL cameras etc.
Easy enough mistake to make.
I'm sorry I have no answers for you Ben. I
On Tue, May 18, 2004 at 05:01:09AM +1000, Andri Kok wrote:
I don't know wether this problem have come up beore, so here it goes...
After a fresh installing and rebooting, the sendmail takes around 1 min and
10 sec to load. Then everytime it starts up, it takes the same amount of
time to
Kent Stewart said:
On Monday 17 May 2004 11:58 am, Doug Poland wrote:
Kent Stewart said:
On Monday 17 May 2004 11:39 am, Doug Poland wrote:
Greetings,
I was running a portupgrade -a this morning on my 5.2.1-RELEASE
system on a freshly cvsup'd ports tree. The first hint of trouble
Kent Stewart said:
On Monday 17 May 2004 11:58 am, Doug Poland wrote:
Kent Stewart said:
On Monday 17 May 2004 11:39 am, Doug Poland wrote:
Greetings,
I was running a portupgrade -a this morning on my 5.2.1-RELEASE
system on a freshly cvsup'd ports tree. The first hint of trouble
I have a system running the latest sources via CVS in the RELENG_5_2
branch. I want to update sys/kernel/vfs_syscalls.c from version 1.333
(which is the latest available in this branch) to version 1.346 from
HEAD. The problem is that the commit for version 1.337 modified more
than one file--some
On Monday 17 May 2004 12:22 pm, Doug Poland wrote:
Kent Stewart said:
On Monday 17 May 2004 11:58 am, Doug Poland wrote:
Kent Stewart said:
On Monday 17 May 2004 11:39 am, Doug Poland wrote:
Greetings,
I was running a portupgrade -a this morning on my 5.2.1-RELEASE
system on a
On Monday 17 May 2004 12:27 pm, Doug Poland wrote:
Kent Stewart said:
On Monday 17 May 2004 11:58 am, Doug Poland wrote:
Kent Stewart said:
On Monday 17 May 2004 11:39 am, Doug Poland wrote:
Greetings,
I was running a portupgrade -a this morning on my
5.2.1-RELEASE system on a
Hello, I know this is coming a while after this original topic was
posted but I just got the same PCMCIA card and did some searching and
didn't find any info about the card being supported as of yet.
I am also fairly new to FreeBSD but am interested in knowing what I
could do to help. I've got
Kent Stewart said:
On Monday 17 May 2004 12:27 pm, Doug Poland wrote:
Kent Stewart said:
On Monday 17 May 2004 11:58 am, Doug Poland wrote:
Kent Stewart said:
On Monday 17 May 2004 11:39 am, Doug Poland wrote:
Greetings,
I was running a portupgrade -a this morning on my
On Sunday 16 May 2004 22:18, Simon Barner wrote:
Daniela wrote:
Hi!
My Mozilla hangs very often, and now I attached to the hanged process
with gdb to see what's wrong. I have debug symbols in Mozilla, in every
other program and in the entire OS. The backtrace is:
#0 0x28458d60 in
Hello,
In the past I've always been able to mount USB devices (a card reader and a
webcam) as msdosfs at /dev/da0 or some such... my new camera's not playing
that game.
It's a Kodak EasyShare DX4530. I've unplugged all my other usb devices to test
things, and booted up with it plugged in.
On Monday 17 May 2004 12:45 pm, Doug Poland wrote:
Kent Stewart said:
On Monday 17 May 2004 12:27 pm, Doug Poland wrote:
Kent Stewart said:
On Monday 17 May 2004 11:58 am, Doug Poland wrote:
Kent Stewart said:
On Monday 17 May 2004 11:39 am, Doug Poland wrote:
Greetings,
Kent Stewart said:
On Monday 17 May 2004 12:45 pm, Doug Poland wrote:
Kent Stewart said:
On Monday 17 May 2004 12:27 pm, Doug Poland wrote:
Kent Stewart said:
On Monday 17 May 2004 11:58 am, Doug Poland wrote:
Kent Stewart said:
On Monday 17 May 2004 11:39 am, Doug Poland wrote:
Does anyone know what's up with the site?
I'm trying to download the patches but without luck.
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
I've only seen PYDB as a package for debian, and tried installing the files
manually. Is there any problem doing this?
jm
--
My other computer is your windows box.
___
[EMAIL PROTECTED] mailing list
On Mon, May 17, 2004 at 11:43:56PM +0800, Stephen Liu wrote:
Hi arden,
Tks for your advice.
im guessing this is what you mean ?
mkisofs -r -J -o cd_image.iso dir/
I made following test without result;
$ mkisofs -r -J -o cd_image.iso
/usr/home/user-A/Storage-040517
...
On Mon, May 17, 2004 at 03:37:00PM -0500, Doug Poland wrote:
I may just blow away all ports, and start from scratch.
Could you not re-cvsup, and then try to build world, before blowing
away your ports? Isn't blowing it all away a bit extreme?
___
On Monday 17 May 2004 01:37 pm, Doug Poland wrote:
Yes, I ran portsdb -uU. However, portsdb will not run now, python2.3
core dumps.
FWIW, your upgrade is old enough that you may have problems with
ruby and portupgrade. I deleted ruby-* and portupgrade and then
did a make install in
On Tue, 18 May 2004 05:01:09 +1000
Andri Kok [EMAIL PROTECTED] wrote:
Hi gurus,
I don't know wether this problem have come up beore, so here it
goes... After a fresh installing and rebooting, the sendmail takes
around 1 min and 10 sec to load. Then everytime it starts up, it
takes the same
1 - 100 of 132 matches
Mail list logo
