Hi,
I have FreeBSD 9.0 (p4) with custom kernel.
uname -i says it:
HOMEWIFI90
However, when I run freebsd-update fetch command it would like to
update my kernel as well:
freebsd-update fetch
Looking up update.FreeBSD.org mirrors... 3 mirrors found.
Fetching metadata signature for 9.0-RELEASE
freebsd-update fetch it suugest me to update kernel and
kernel.symbols.
Best regards,
Denis
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to freebsd-questions-unsubscr
- may be I missed something and there will be an easy
fix to my problem. I want to make sure that the problem exists, and
I'm not the only person faced with this error. And also I have a small
hope that problem will be fixed by freebsd team :-).
Best regards,
Denis
-update
just to install security patches (it seems to be easy and faster then
to rebuild world).
Best regards,
Denis
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail
file for IA-64
systems or maybe consult me what I need to do?
Thanks and Best regards,
Denis.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to freebsd-questions
or no activity, I haven't started using it for
real yet.
The drive spins down frequently because of lack of activity, and takes
quite a few seconds to spin up.
Now, I frequently get errors in the 'zpool status' thus (like, a couple
of times per day):
[denis@datasink] ~ zpool status -v
--
How I may stay commiter? Where I may get passwd on ssh,dcvs,pcvs,svn?
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to
is to replace the disk and restore
from a backup, but this isn't really an option immediately.
So, is there a way to mark the inode bad and then launch an fsck ? How can I
turn offset=-574217714356717568 into a usable piece of information?
Any suggestion welcome.
Denis, fortin
Where download if_ppp.ko?
Denis
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
I have started using mount -u -o snapshot as part of my backup process
in order to have a week worth of local differential backups to allow
quick and easy recovery of lost/overwritten/etc files.
The snapshot of the partition (~250G and 2.3 million inodes used. ~10GB
of data change per day)
, what can I do to compile perl?
Best regards,
Denis
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
with it.
No, there are no any extra settings in /etc/make.conf.
Denis
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
was easy - long time ago I made a link in /bin/basename to
/usr/compat/linux/bin/basename .
There for during perl config wrong basename was chosen and lead to the error.
Best regards,
Denis
___
freebsd-questions@freebsd.org mailing list
http
I've tried pure-ftpd and vsftpd and got very low upload speed (~200kb/s)
per a connection. but when I download on the server using wget speed is
2Mb/s
on the ftpclient from which I do upload if to increase the param I/O
buffer size till 1Mb upload speed increases to ~2Mb/s
when I use these
(not that that should matter)
network card: em0
--
Chris St Denis
Programmer
SmarttNet (www.smartt.com)
Ph: 604-473-9700 Ext. 200
---
Smart Internet Solutions For Businesses
___
freebsd-questions@freebsd.org mailing list
http
Steve Bertrand wrote:
Chris St Denis wrote:
Steve Bertrand wrote:
What type of device is em1 attached to? Is it a switch or a hub? Is it
possible to upgrade this? You should upgrade it to 100 (or 1000)
anyways. Does this device show any collisions?
This is a dedicated
for sfbufs denied
0 requests for sfbufs delayed
999635 requests for I/O initiated by sendfile
276104 calls to protocol drain routines
How do I fix this?
--
Chris St Denis
Programmer
SmarttNet (www.smartt.com)
Ph: 604-473-9700 Ext. 200
---
Smart Internet
list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to
freebsd-questions-unsubscr...@freebsd.org
--
Chris St Denis
Programmer
SmarttNet (www.smartt.com)
Ph: 604-473-9700 Ext. 200
---
Smart Internet Solutions
Steve Bertrand wrote:
Chris St Denis wrote:
Wojciech Puchar wrote:
possible reasons
- your firewall rules are the cause - check it.
Nope
eureka# ipfw list
- your network card produce problems (REALLY i have that case)
I have had this kind of error
libwrap (more or less) in sync with the
main one, or is it completely separate?
--
Chris St Denis
Programmer
SmarttNet (www.smartt.com)
Ph: 604-473-9700 Ext. 200
---
Smart Internet Solutions For Businesses
Hello.
Sorry, but i have no exact answer to your question.
I have problems with pf on 7.1 too.
But i`ve noticed difference between 7.1-p2 and 7.1-p3
My problem appears only in p3 not in p2
may your problem is fixed in p3 ?
Michael K. Smith - Adhost пишет:
** Apologies to folks already subscribed
Gerardo Paredes wrote:
Hello, i have a problem compiling a custom kernel on a AMD 850 MHZ Processor,
however on the last stage it fails with the following message:
make doesn't know how to make KERNCONF
the command i run is:
cd /usr/src
make buildkernel KERNCONF=MIO
where MIO is my
Hello,
I have a problem with installation of FreeBSD 7.0 on soekris.
I use pxeboot.
The installation go up but when arrive loader logo, the loader don't
go, i don't see the logo and isntallation stop.the prompt is
blocked.
Do you have suggestion?
thanks.
--
Denis Beltramo
Jeff Chen - PTT 陳龍焜 wrote:
Hi,
My company is a storage RAID system company. There is one customer ask iSCSI
solution with my production of my company with FreeBSD 6.1. But I found some
information in the Internet, the iSCSI full support on FreeBSD is 7.0. Is it
mean FreeBSD 6.1 can’t
At 1TB the drive will take very long to fsck if the server ever crashes
or looses power.
If this is a problem you should look into using gjournal(8)
Not sure off hand why it would be so slow, but keep in mind raid5 isn't
particularly fast for writes
Rich Fairbanks wrote:
Hi,
I'm new to
Stefan Moro wrote:
Hi!
I've got a question regarding the way that gmirror identifies what
components (if that is the right term) are included in a mirror.
I recently created a mirror over two disks, ad2 and ad4. After some
bios changes (activating PATA) these devices were changed to ad6 and
Andreas Davour wrote:
On Tue, 23 Sep 2008, Chris St Denis wrote:
Occasionally, I accidentially cat a binary file or a directory casing
the terminal output to be corrupted with text looking like (don't
know if this will make it through the mail cleanly)
E ??? ?? ?.
2
Occasionally, I accidentially cat a binary file or a directory casing
the terminal output to be corrupted with text looking like (don't know
if this will make it through the mail cleanly)
E ??? ?? ?.
2#
To fix this normally I just close the window and open a new ssh
completed successfully.
^C
the output of command is correct but don't exit and I must press control^C.
I want exit without press control^C, have you suggestions to resolve this
problem ?
Bye Gian Paolo
On Mon, Sep 15, 2008 at 10:08 PM, Chris St Denis [EMAIL PROTECTED] wrote:
Ivan Voras
Lowell Gilbert wrote:
Gian Paolo Buono [EMAIL PROTECTED] writes:
Hi, I have on a server ibm 3650 FreeBSD 7.0-STABLE and the proccess
that running are nagios-3.0.2, apache-2.2.8 and heartbeat-1.2.5_3;
random after some day machine becomes semi-dead, the ping respond but
any stack (ssh,http)
Matthew Seaman wrote:
FreeBSD wrote:
Hi everyone,
I've been asked by a customer to install Drupal on one server to
manage a new site. No problem yet. But, he also asked if it would be
possible to install it for other sites.
I know that there is a warning if you want to install a port that
Grant Peel wrote:
Hi CHris,
Just attempting to install the port. Something I noticed when the
install crapped out was that it wanted me to use the Force Package
Register for the OpenSSL_Overwrite_Base port.
That port was already installed, what would be the correct method to
deal with
the port won't kill my connection or cause general
weirdness to people using https?
-Grant
- Original Message - From: Chris St Denis [EMAIL PROTECTED]
To: Grant Peel [EMAIL PROTECTED]
Cc: freebsd-questions@freebsd.org; Christopher Cowart
[EMAIL PROTECTED]
Sent: Friday, September 12
://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
Courier maildrop should do what you need. it's in ports/mail/maildrop.
It can have a mysql backend if you compile it WITH_AUTHLIB=yes
--
Chris St Denis
Programmer
SmarttNet (www.smartt.com
Hi all.
Environment:
SAN attached via fiber to 4 servers with freebsd 6.3
The question is:
What filesystem i should use to have rw access to SAN from any of 4
servers ?
---
WBR
Link
___
freebsd-questions@freebsd.org mailing list
Dan Nelson wrote:
In the last episode (Aug 27), jef moskot said:
We just upgraded to a new server (FreeBSD 7.0) and in our passwd file
is the user messagebus (there's also a group).
What's this for and can the UID be changed? It's got the same number
as one of our oldest users and we're
[EMAIL PROTECTED] wrote:
I have some servers with IPMI that allow me to have a serial console.
I have setup a serial console config on my servers and it seems to
work reasonably well in remote emergencies, but causes serious
problems if I ever have to use the real console.
It means that I
Ashish Shukla आशीष शुक्ल wrote:
Hi,
I'm running FreeBSD 7.0-RELEASE-p3 (amd64). I've two ext3 partitions
on my disk which I want to be able to access (read-only) from my
FreeBSD installation. But I can only access one of them (with no
issues), though I'm able to mount both of them fine in my
I have some servers with IPMI that allow me to have a serial console. I
have setup a serial console config on my servers and it seems to work
reasonably well in remote emergencies, but causes serious problems if I
ever have to use the real console.
It means that I can't use single user mode
I recently created a new mail server with a 600GB raid5 partition to
store maildirs. When I created it, I used a newfs -i 4096 but when I had
recent hardware problems the background FSCK took a very long time, and
I'm concerned that the -i 4096 may have made that a lot worse.
So I ask. What
this is and/or really if it's what your looking for.
~Paul
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to
[EMAIL PROTECTED]
Also see man carp
--
Chris St Denis
the port's makefile will do it for you?
--
Chris St Denis
Programmer
SmarttNet (www.smartt.com)
Ph: 604-473-9700 Ext. 200
---
Smart Internet Solutions For Businesses
___
freebsd-questions@freebsd.org mailing list
http
Madana wrote:
Dear sir/madam..
I am a student studying computers and would like to build unix operating
systems later on so i was browsing through your website for the source code but
could not find it so it would be very very nice if you could give me the url of
the page where i can get
Veronica Labarca wrote:
Hi,
I have inherited a FreeBSD server and need to change the apache
configuration, but cannot log in to the server. I have the root password
(and know how to change it if needed in any case). The problem is that root
login is disabled. There are various administrative
,
Thanks for your quick response. No. I mean root login at the console is
dissallowed. Why??? Beats me! I got it that way.
Viqui
-Original Message-
From: Chris St Denis [mailto:[EMAIL PROTECTED]
Sent: Thursday, July 10, 2008 2:24 PM
To: Veronica Labarca
Cc: freebsd-questions@freebsd.org
Daniel Gerzo wrote:
Hello,
* Something like a loopback address inside the jail. It may be
127.0.0.2 instead of 127.0.0.1 but most software can be persuaded
to use it for loopback style things.
* The ability to map several IPs onto the jailed system by use of
NAT and
Ivaylo Bonev wrote:
I want to use FreeBSD 7.0 for Backup server. After little searching,
my decision was to use Bacula (because of Windows client). After
installation of latest version (Bacula 2.4.0) and active googling,
reading very carefuly Onlamp article of Bacula server on FreeBSD
in that list.
--
Chris St Denis
Programmer
SmarttNet (www.smartt.com)
Ph: 604-473-9700 Ext. 200
---
Smart Internet Solutions For Businesses
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman
Hi.
Does anybody know how to make ipnat map/or proxying pptp traffic ?
Problem is:
mpd server with pptp - somwhere in internet.
Gateway with ipnat.
Clients behind gateway can not access pptp server at same time.
I found something like:
map bce1 0/0 - 0/0 proxy port 1723 pptp/tcp
but it doesn`t
be
greatly appreciated.
Shane
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
--
Chris St Denis
Programmer
SmarttNet (www.smartt.com)
Ph
Hi all.
I have very strange problem as for me.
FreeBSD 6.3. mpd5. it is configured to server standard pptp requests.
Everybody listed in mpd.secret can connect with no problems. But...
But only till ng13 is created. After connecting 14 users nobody can
connect anymore... If somebody dissconects
.
Casey
- Chris St Denis [EMAIL PROTECTED] wrote:
Casey Scott wrote:
Can we no longer use make buildworld to upgrade from source
builds? Everytime I've tried, I get build errors. I've gotten the
impression from a few things I've read that freebsd
To unsubscribe, send any mail to
[EMAIL PROTECTED]
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to
[EMAIL PROTECTED]
--
Chris St Denis
Programmer
SmarttNet
Robert Jesacher wrote:
On 06.05.2008, at 22:02, Ed Maste wrote:
On Tue, May 06, 2008 at 12:44:02PM -0700, Chris St Denis wrote:
I pulled out one of the raid5 drives to test the functionality and
noticed that FreeBSD didn't seem to notice the disk failure at all. I
was expecting kernel
wrote:
In the last episode (May 16), Robert Jesacher said:
On 06.05.2008, at 22:02, Ed Maste wrote:
On Tue, May 06, 2008 at 12:44:02PM -0700, Chris St Denis wrote:
I pulled out one of the raid5 drives to test the functionality and
noticed that FreeBSD didn't seem to notice
I recently setup a new FreeBSD 7.0 AMD64 server with an IBM ServeRAID-8k
configured with a raid5 for data and raid1 for OS.
I pulled out one of the raid5 drives to test the functionality and
noticed that FreeBSD didn't seem to notice the disk failure at all. I
was expecting kernel messages
but
sendmail -v [EMAIL PROTECTED] test.msg will work.
If anyone knows how to get around this?
In your .mc file
define(`confDONT_PROBE_INTERFACES', `true')
Dan
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Chris St Denis
Sent: 31 mars 2008 16:29
To: freebsd
I've setup a new web server hostname doremi.ctgameinfo.com. When I try
to send mail to [EMAIL PROTECTED] it tries to deliver it locally
instead of to the mx server mx1.ctgameinfo.com.
In previous versions this seems to work correctly. Why would it be
trying to deliver locally this time? I'm
Giorgos Keramidas wrote:
On Mon, 31 Mar 2008 13:29:28 -0700, Chris St Denis [EMAIL PROTECTED] wrote:
I've setup a new web server hostname doremi.ctgameinfo.com. When I try
to send mail to [EMAIL PROTECTED] it tries to deliver it locally
instead of to the mx server mx1.ctgameinfo.com
1. try to compile kernel without SMP.
2. Examine hardware.
刘德安 пишет:
FreeBSD GFAOS 6.2-RELEASE FreeBSD 6.2-RELEASE #0: Mon Jan 7 15:29:50 UTC
2008 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/SMP i386
when rebooting system
Error messages:
kernel: Fatal trap 12: page fault while in
I dont remember if it can be done by sendmail, but with exim it can be
done easy.
Doug Poland пишет:
Hello,
Not sure if this is the most appropriate place for this question, but
since all my servers are FreeBSD 6.x/7.x, I'll give it a go...
I am considering setting up SMTP auth on a number of
Download sources for software you need, and compile it manualy.
but firstly i`d try to delete ports directory, and fetch ports again.
Daniel Molina Wegener пишет:
Hi,
I've updated and upgraded the ports tree to the . branch
but serveral of ports doesn't compile or are completly absent
on the
I confirm it.
Seems to be loader bug.
I`ve tried to compile it without nfs support at all... but it didn`t help.
I`ve been searching for solution for about a week and found nothing.
Hey,
I've been building FreeBSD jumpstart infrastructure and it mostly
works. I'm using tftp to boot off the
with 6.2 and
amd64 arch, so may be I`ll discover something new.
Zinevich Denis wrote:
It does not work. I`ve tried. But as I found in forums and mailing
lists it randomly helps sometimes.
Please don't top-post. I have a comment in
src/sys/boot/i386/loader/conf.c v1.26 (RELENG_7) saying
It does not work. I`ve tried. But as I found in forums and mailing lists
it randomly helps sometimes.
This should Just Work, and I've had it work about half a year ago on
6.2. Which version are you compiling on?
The tutorial I have handy[1] says to compile with:
make
I had a problem with 1950. It emerged that this servers have problems
with reboot.
After executing reboot commant server hangs just after printing uptime.
http://lists.freebsd.org/pipermail/freebsd-stable/2006-October/029108.html
___
Probably you shoul look to:
netstat -m
4/1421/1425 mbufs in use (current/cache/total)
0/614/614/25600 mbuf clusters in use (current/cache/total/max)
netstat -Lan
give you a link to good article. It`s in russian, but you can see it for
commands
and sysctl variables which may help you.
I had such mistake several days ago. In my case the reson was that I
forgot that I`m usin amd64 arch, and I placed config to
/usr/src/sys/i386/conf, but the right place was /usr/src/sys/amd64/conf
PS: Ну если не говоришь ты хорошо по английски, то хоть не позорь родной
союз :-). Тему письма надо
I had such mistake several days ago. In my case the reson was that I
forgot that I`m usin amd64 arch, and I placed config to
/usr/src/sys/i386/conf, but the right place was /usr/src/sys/amd64/conf
PS: Ну если не говоришь ты хорошо по английски, то хоть не позорь родной
союз :-). Тему письма
Hello people,
I'd like to ask, whether there is, or will be a paravirtualized
version of freebsd for amd64?
Kind regards,
Denis Maligin
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
?
Thanks!
--
Denis Beltramo
[EMAIL PROTECTED]
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
Hi all.
Some problem with free.
I`ve got such mess in log:
Jan 4 22:47:09 fs kernel: Fatal trap 12: page fault while in kernel mode
Jan 4 22:47:09 fs kernel: fault virtual address= 0x3e
Jan 4 22:47:09 fs kernel: fault code = supervisor read, page not present
Jan 4 22:47:09 fs kernel:
I had such problem with FreeBSD 4.7, and finally discovered that this
records were for the last year.
My auth.log was pretty small and contain records for more than one
year. And daily security included records for the last year. May this
could be applied to you?
Best regards, Denis.
On 9/12/07
Now, if someone just changes the port in their browser to 3128 (squid
proxy port), then all content filtering will be bypassed.
I have the same setup at home for my kids.
Check the /etc/ipnat.conf file to redirect all web traffic to your
FreeBSD_gateway_IP_address:8080 (assuming your FreeBSD box
!?!
Is there an obvious solution that I'm missing, or a canonical workaround
to this problem?
Thanks
Denis F.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL
Hello. This is first time I write to you, so I beg you pardon if
something goes wrong.
We bought HP Proliant DL 320 G4. I tried to install FreeBSD and all
the attempts failed. 5.4 cannot see my SATA Raid controller and says
that I have no hard disks. 6.1RC2 told me the same. But 6.0i386
6.0amd64
Try
#dos2unix file_name
Hi list,
I need to substitute a lot of characters ^M (ctrl+M)
at the end of each line in my file.
The command :%s/^M//g insn't have success.
How can i do it ?
Thanks,
Aguiar
___
freebsd-questions@freebsd.org mailing list
http://cr.yp.to/djbdns/guarantee.html
Richard, besides simple you want a _secure_ caching name server. Yes, you
can type named_enable in rc.conf and be done with it, just don't forget
to periodically check the security updates web page for BIND exploits.
Regards!
Richard Collyer wrote:
Hello,
Check the DJBDNS author's site: http://cr.yp.to/djbdns.html
The instructions are simple. If there is a lot of name resolutions
happening on the web server itself, install dnscache on the localhost.
My advice to you is to avoid BIND. It is too complicated for your needs.
Regards!
At 05:50 PM
I don't have physical access to the server at the moment to try the
loader prompt but...
I tried
mv /boot/kernel /root/
mv /boot/kernel.old /root/
make installkernel
the folder and its files reappear in /boot but a reboot still shows
the custom config.
I also tried shutting down the
The port you are looking for is net/openldap23-server.
If you do a make config on this port and enable SASL support the
resulting package will be openldap23-sasl-server.
Regards,
Denis Lemire
On 1/6/06, Randy Schultz [EMAIL PROTECTED] wrote:
Hi there,
I had a 5.4 system running
services.
Dansguarding databases get updated on a weekly basis. In addition the
server acts as a firewall of course.
Regards!
Denis
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send
I have setup many IPSec FreeBSD VPN's using racoon and gif interfaces.
On the FreeBSD side I've got:
gif0: flags=8051UP,POINTOPOINT,RUNNING,MULTICAST mtu 1280
tunnel inet [LOCAL_WAN_IP] -- [REMOTE_WAN_IP]
inet 172.31.1.1 -- 192.168.1.1 netmask 0x
I have the usual setkey
Would be real nice to be able to remove mass groups of options with one
nooptions
nooptions scsi or nooptionsgroup scsi
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Kirk Strauser
Sent: Friday, August 26, 2005 11:44 AM
To: freebsd-questions@freebsd.org
It means an account that can not be logged in to.
The in the hash algorithm used in master.password nothing encrypts to * so
no possible password will ever match the encrypted value * thus locking out
the account from login.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL
Pre 2.0 has some major security problems that have no patches available.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Matt Virus
Sent: Monday, August 29, 2005 10:26 AM
To: Vizion; freebsd
Subject: Re: Web forum tools -recomendations please
Vizion
on the disk... Sigh. Bottom
line is that the installation appears to work, but I am unable to then boot
from the harddisk (the boot loader complains it cannot find /boot/loader).
Any suggestions?
Thanks
Denis F.
___
freebsd-questions@freebsd.org
I've used phpBB with php5 just fine.
If you want alternative forums software, take a look at http://fudforum.org
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Vizion
Sent: Thursday, September 08, 2005 8:51 PM
To: freebsd-questions@freebsd.org
Cc:
I think I've had this problem with a similar supermicro system.
The solution for me was to turn off the onboard ide raid controller.
I see SCSI in those server specs. If you are using all SCSI try disabeling
all the ata and sata in the bios. Also, try turning off raid features of the
SCSI if
There should be no problem creating a filesystem on a raid 5 (hardware or
software) and mounting that as /var or /var/log or whatever.
As for the daily reports, take a look at /etc/mail/aliases I think you can
alias root to multiple email addresses (unsure, never tried)
-Original
This isn't the awstats mailing list but.
There is probably a better way, but you could just filter your log through a
grep just_this_directory before (0r while) feeding them into awstats
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Redmond
If pgaccess is a client on another computer you'll need to edit pg_hba.conf
This is better asked on a pgsql mailing list.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of stan
Sent: Friday, September 09, 2005 12:09 PM
To: Free BSD Questions list
Subject:
a. I am hoping to see this fixed in 6.x
b. This I agree with. As a desktop client FreeBSD still needs work.
c. sysutils/portaudit
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Scott W
Sent: Sunday, September 04, 2005 11:49 AM
To: [EMAIL PROTECTED]
Cc:
Looks like you are mixing debug and non-debug builds of php.
Do a port update to make sure your makefile is clean.
Deinstall php and all of the modules.
Reinstall php
Reinstall the modules.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Vizion
Sent:
Which config file is this in? I didn't see any otp stuff in /etc/pam.d/
-Original Message-
From: Igor Robul [mailto:[EMAIL PROTECTED]
Sent: Thursday, September 08, 2005 12:53 AM
To: Chris St Denis; freebsd-questions@freebsd.org
Subject: Re: Odd SU output?
Chris St Denis wrote:
While
http://www.osnews.com/story.php?news_id=10951
http://www.freebsd.org/releases/6.0R/todo.html
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Gerard Seibert
Sent: Tuesday, September 06, 2005 5:11 AM
To: freebsd-questions@freebsd.org
Subject: FreeBSD v6
I
While being away from work for a week, some odd output appeared on my su
comment.
%su
otp-md5 497 pe2119 ext
Password:
Has my server been rooted or something? Or did I (or somebody else) just
change some configuration variable?
___
Something like this may be what you want.
http://www.postgresql.org/docs/current/interactive/ssh-tunnels.html
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Toomas Laasik
Sent: Wednesday, August 24, 2005 3:21 PM
To: Jonathan Glaschke; [EMAIL PROTECTED]
How can I easily auto deny after x failed attempts? Is this an sshd setting?
I could find it.
Is there something in ports that will firewall off somebody who is brute
forcing?
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Pat Maddox
Sent: Tuesday,
Occasionally I get entries like this in my log. It looks like more than one
process is logging at the same time. Shouldn't syslogd be
thread/SMP/concurrency safe from this kind of thing?
Aug 24 05:29:44 sakura kernel: 66ppiidd 119942486 9( (hthttptdpd)),,
uiudi d 808:0 :e xeixtietde do no ns
1 - 100 of 203 matches
Mail list logo
