Good Morning,
Is there a flag or a setting in the PF firewall in FreeBSD that you can set to
allow TCPmux traffic to flow through it? The pass all rule doesn't seem to
work, however if I disable PF completely then the TCPmux traffic flow through.
Kind Regards
Important Notice:
This e-mail
Hi,
Thank you for your very speedy response.
Also Attached is the config file.
Kind Regards
Stefan
# Section: Interfaces
public_if19=em0
private_if18=em1
mgmt_if=em1
# End: Interfaces
# Section: Ports
Management = {22,}
ikeports = {500,4500}
# End: Ports
# Section: Address Table
table
Hi,
After about 15 minutes of trying to register to the forums I've quit trying!
The server is defective! Captcha's don't work! Can't register of request my
password.
vBulletin Message
The string you entered for the image verification did not match what was
displayed.
Greetings,
Stefan
at the right LBA?
I currently have a zpool scrub running, and I will start a long test after that
just to make sure there's no further problems hiding. Any other suggestions?
Stefan
--
Stefan Bethke s...@lassitu.de Fon +49 151 14070811
___
freebsd
255.255.255.0 with gateway
10.10.10.1
The jail must be running 192.168.178.10 netmask 255.255.255.0 with gateway
192.168.178.1
Is this possible?
How to do it??
What kind of problems to expect?
Look at kernel option ROUTETABLES and setfib(1).
If you're adventurous, check out VIMAGE.
Stefan
what to compile and what
not) is build and isos are made.
Thank you very much
Stefan Miklosovic
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to freebsd-questions
Hi All,
My name is Stefan and I am newbie with FreeBSD but I'm interested to learn more
about FreeBSD . I am keen to know and learn more on the process to make a new
BSD's derivative/fork from FreeBSD ?
How is the method for customizing/remastering FreeBSD ? The most interesting
part
Hi Christer,
As there are many parts of the source code(from
bin,cddl,contrib..usr.sbin),
which part(s) of source code do I need to modify?
Regards,
Stefanus
From: Christer Solskogen christer.solsko...@gmail.com
To: Stefan N stefanbsd...@yahoo.com
Cc
Hi Patrick,
Thanks for your usefull hints!!! I will try that as soon as possible.
Regards,
Stefanus
From: Patrick Lamaiziere patf...@davenulle.org
To: Stefan N stefanbsd...@yahoo.com
Cc: freebsd-questions@FreeBSD.org
Sent: Mon, April 11, 2011 9:15:39 PM
/var : ufs with softupdates
/usr/obj : zfs with checksums disabled
/usr/src : zfs with compression enabled
/home : zfs with compression disabled and checksums enabled
I ran a test with a blocksize of 8KB and 16 threads.
/var : 25.2MB/s
/usr/obj : 64.8MB/s
/usr/src : 386.3MB/s
Hi list,
title says it, i would like completely remove csh and install bash
instead. As far I know, csh is build in system, could I remove it
manually and install bash (of course, in reverse order :D)
Are there such dependencies on csh? I know that real system scripting
is done via /bin/sh
co
do it in make install clean way? Change port's make file ? no way .
On 6/4/10, Michael Powell nightre...@hotmail.com wrote:
Stefan Miklosovic wrote:
Hi list,
title says it, i would like completely remove csh and install bash
instead. As far I know, csh is build in system, could I remove
these functionalities to userland for simple consumption ?
Thanks,
Stefan
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
hi
I have a shell script and I would like to do something like this
$ ./script.sh somefile
After that, I can, just say, write content of that file on the screen.
I would like to know, how to do that in script, I dont know that
tricky redirection things ...
thanks a lot
hi list,
I am going to add user test in system:
~/:sudo pw useradd test -m
then, I am going to check quotas
~/:sudo quota -u -v test
Disk quotas for user test (uid 2022):
Filesystem usage quota limit grace files quota limit
grace
/home 36 0 0
hi again,
I correct my post, of course I can set
quotas for that user, by setquota command,
but I cant see quotas for that user, only by
repquota.
I need to see it by quota command because I
write a script where I depend on it.
On Sun, Oct 18, 2009 at 2:13 PM, Stefan Miklosovic
miklosovic.free
hi list,
if error output of some program appear on screen,
it is possible to print it also to some file simultaneously ?
e.g
if I cat file which do not exist, error is on screen,
I want to add that error to some file (errors.txt)
thank you
___
hi list,
today after some work on server, it froze and
because I live 50 km far away that server, my buddy has
assisted in recovery.
After rebooting, he took some photos and
wrote me, what he saw / did.
Before resetting of server, these messages have been
appearing on screen:
aac0: COMMAND
hi list,
I've ftp server, where I want to deny anonymous
logins from the outer net, but allow logins of anonymous
users from inner net. Normal system users would have
ftp access to theirs home directories from both networks.
I am using vsftpd, I wanted to configure tcp wrappers, but it does not
hi list,
form time to time, there appears some error / warning
messages in console, which say this:
Sep 27 23:54:40 dell kernel: aac0: **Monitor** ID(0:02:0); Error Event
[command:0x28]
Sep 27 23:54:40 dell kernel: aac0: **Monitor** ID(0:02:0); Medium Error
[k:0x3,c:0x3,q:0x0]
Sep 27 23:54:40
hi list,
I am about writing shell script which adds system account
by tens (even hundreds). Info about added accounts is stored
in external file which has syntax like this
account-name:comment:email-addres
Briefly,
account-name is name of account
comment field is comment which appears in
hi,
I would like to set some quotas with setquota
on crypted disk with geli, but if I want to do so -
/etc/fstab
/dev/ad0s2f.eli /home ufs
rw,noatime,userquota,groupquota 2 2
/etc/rc.conf
enable_quotas=YES
I can edit quotas by edquota, but with setquota
hi,
assuming I execute shell script like this
$ ./script -c hello world
I want to save hello world string to variable COMMENT in shell script.
code:
#!/bin/sh
parse_cmdline() {
while [ $# -gt 0 ]; do
case $1 in
-c)
shift
COMMENT=$1
hehe :D
easy as hell, one has to enclose argument of parse_cmdline into brackets :)
parse_cmdline $@
sorry for noise
On Mon, Aug 31, 2009 at 1:07 AM, Stefan Miklosovic
miklosovic.free...@gmail.com wrote:
hi,
assuming I execute shell script like this
$ ./script -c hello world
I want
hi,
I am writing a script in which I want to decide if disk / system is capable
to set quotas for user / groups.
how to check it?
I am thinking about
1) checking enable_quotas=YES in /etc/rc.conf
2) should I try to look in /etc/fstab? There is userquota and / or
groupquota in line for some disk
Hi there,
I am installing vsftpd server with ssl.
It seems it works good, BUT
*~:*ftp-tls notebook
Trying 127.0.0.1...
Connected to localhost.
220 Welcome to miniBSD service.
234 Proceed with negotiation.
[Starting SSL/TLS negotiation...]
WARNING: Server's certificate issuer's certificate isn't
hi all,
I am about chrooting ftp users into theirs home
directories. I've following in the end of /etc/ssh/sshd_config
Subsystem sftp internal-sftp
Match group ftp
ChrootDirectory /home
X11Forwarding no
AllowTcpForwarding no
ForceCommand internal-sftp
hi,
I would like to use vsftpd with ssl support.
If I install it from ports, there is an option to
compile it against ssl librarie(s) (VSFTPD_SSL)
If I download it by pkg_fetch and extract the package
and use ldd on vsftpd in libexec directory,
there is no ssl library, in complied way, there are
hi,
while upgrading firefox 3.0.11-1, this error appeared to me:
--- Upgrading 'firefox-3.0.11,1' to 'firefox-3.0.13,1' (www/firefox3)
--- Building '/usr/ports/www/firefox3'
=== Cleaning for firefox-3.0.13,1
** Command failed [exit code 1]: /usr/bin/script -qa
hi,
my pc gets ip address from dhcp server,
but on my pc, there is running
sshd.
I want to make ssh to listen to only one
ip address, but if ip changes due to dhcp,
ssh server do not work properly.
I know, that dhcp is able to assign ip address
to client from some range e.g. 192.168.0.1-254
It
hi all,
I am going to do some research in area of
creating server in educational sphere, for
example for some computer course at an
university.
At this server, there would be a lot of
users (in tens, even hundreds) and I am also
going to write some kind of shell script, which
all of this does
hi all
i am going to encrypt my /home directory
which is mounted in /etc/fstab like
/dev/ad0s2f /home ufs rw,noatime
2 2
I did like is wrote in
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/disks-encrypting.html
everything looks good. ad0s2f.eli
My name is Stefan Walker. I am trying to develop some referral partners in your
region and wanted to see if you would be interested in teaming up with me and
Speakeasy. We offer a very nice residual commission of 14%. I have included
information about our program.
FYI- Attached is an overview
hi all,
I would like to install s...@home client to my machine,
There are tutorials on internet how to install it, but it is all
about package called simply setiathome. I dont see
such package in a port tree. I was searching for similar
one, it seems I found it :
hi,
title says it, i downloaded mp4 file by youtube-dl,
but it downloaded video and audio as well. I would
like to separate audio from that file.
i try to find some port in /usr/ports/audio but nothing
reasonable occudred.
i tried find . -type f -name pkg-descr | xargs grep mp4
but these were
To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org
--
Best Wishes,
Stefan Lambrev
ICQ# 24134177
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail
Hello,
My name is Stefan Beskow and I work as a configuration manager within
Ericsson AB.
I am investigating the legal aspects of the use of open source sw within
a project.
Could you please help me with information about license issues and
copywriting issues ea for the fsck_msdosfs ?
What
hi
hi all,
i try to install xorg as a package like:
# pkg_add -r xorg
it takes a while, but only an error appears to me, it says that
Error: FTP Unable to get
ftp://ftp.freebsd.org/pub/FreeBSD/ports/i386/packages-7-stable/Latest/xorg.tbz
:
File unavailable (e.g., file not found, no access)
Hi all,
I decided to set up my own CVSup server just for my local
network. After reading all related stuff I should find, I have
solid knowledge about this issue but one thing disturbed my mind.
My pc, server which I will mirroring from, is also downloading
source tree from another server
Hi, me again,
I also havent noticed, that there is a choice
among -current or -stable. If I want to
mirror just -stable (this is possible with cvsup stable-supfile),
can I?
thank you again
On Sun, Jan 11, 2009 at 8:37 PM, Stefan Miklosovic
miklosovic.free...@gmail.com wrote:
Hi all,
I
hi
If I something install from ports, I cant use that command
directly. It says to me that command not found.
Do I have to always log in and log out before use of
command? Is there some other way?
my shell is csh, 7.1-RELEASE
thx
___
hi,
i would like to know, if it has a sense to compile software provided
in form of ports in /usr/ports. I mean, I know there is a bunch of
options you can choose from and make certain application more
suitable for your hardware / software needs. I just want to know, if
I can install software in
hi
i have two ethernet cards on my box
uname -a
FreeBSD dexter 7.0-RELEASE Freebsd 7.0-RELEASE #5: Fri Jan 2 21:25:21 CET
2009 r...@dexter:/usr/obj/usr/src/sys/DEXTER i386
ifconfig
rl0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST metric 0 mtu 1500
options=8VLAN_MTU
ether
Ok, that explains it.
Thanks for the quick answers!
BR
Stefan
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
the /dev entries to address disks??
I'm just curious how gmirror does this.
BR Stefan
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
Policy can be loaded and enforced?
Thanks a lot!
Stefan
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
I've been running a FreeBSD server in production for over a year now and
this is the first time ever I even have to think about hardware. The
card itself is a cheap no-name card.
What am I doing wrong ?
Thank you very much,
CU Stefan
CAUTION: This e-mail and any attachment(s) contains
Oliver Peter wrote:
On Tue, Jun 26, 2007 at 07:14:59PM +0300, Cheffo wrote:
Hi list,
I have server running postfix + courier-imap, and I'm looking for
someway to add possibility to exchange calendars/contacts/meeting
invitations/etc between mail clients.
Can someone recommend calendar,
) on which my dvdwriter(acd0) is connected to.
Any help or suggestion is really appreciated.
Thanks in advance, greeting
Stefan
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send
On Saturday 28 April 2007 14:16:34 Stefan Ehmann wrote:
If a non-privilged program calls syslog(3), after the call, errno is set to
13 (permission denied).
Seems like I jumped the gun.
opengroup.org says The value of errno should only be examined when it is
indicated to be valid
with
errno=13 and the second connect succeeds.
This is all fine, except that errno is set to 13 after calling syslog().
Is this a bug or expected behaviour?
IMHO errno should be set to 0 before the second connect is called -- or is
this a bad idea?
Stefan
I'm organising a linux/opensource day in my school. Is it possible to
get some saple freeBSD cds for those who want to try it?
Stefan
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
-hackers
To unsubscribe, send any mail to
[EMAIL PROTECTED]
--
Best Wishes,
Stefan Lambrev
ICQ# 24134177
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL
of the PK-760SA to 1.06. Still the same problem
There is no problem using the PX-760SA without atapicam.
dmesg attached. (without atapicam in kernel)
Any help appreciated
//Stefan
dmesg
Description: Binary data
___
freebsd-questions@freebsd.org mailing
and system configuration.
Thanks in advance, Stefan
_
Der WEB.DE SmartSurfer hilft bis zu 70% Ihrer Onlinekosten zu sparen!
http://smartsurfer.web.de/?mc=100071distributionid=0066
at least current low end, or high end from a couple of
years
ago, to get the best performance.
My 533 MHz Via C3 based router does 230 kB/s with OpenVPN while being
about 75% idle. (My line's not faster, so I don't know where it would
peak out.)
Stefan
--
Stefan Bethke [EMAIL PROTECTED
processes are too short lived to consistently show up
when top is scanning the process table?
Stefan
--
Stefan Bethke [EMAIL PROTECTED] Fon +49 170 346 0140
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd
Am 10.08.2006 um 11:09 schrieb Roberto Nunnari:
Stefan Bethke wrote:
Am 10.08.2006 um 08:38 schrieb Roberto Nunnari:
Hello everybody.
Just a short question: Why top doesn't any more show what
processes use the CPU? I mean.. 0.0% idle and the sum of the
processes CPU doesn't reach 1.0
Am 10.08.2006 um 17:28 schrieb Jean Chiappini:
Hello all,
I had setup a ldap server and now, I want to authenticate the local
user of my freebsd 6.1.
I had try to found some help with google, but I don't find any
solution.
Check out ports net/nss_ldap and security/pam_ldap.
Stefan
files needed if I need to go to Win XP.
Just install the standard mbr using fdisk(8):
# fdisk -B ad0
Make sure that your FreeBSD slice is the only active slice, also
using fdisk.
If you want to go back to FreeBSD's boot0, use boot0cfg(8):
# boot0cfg -B
Stefan
--
Stefan Bethke [EMAIL
releases. You need to build from
ports.
Stefan
* There's trivial software that might work, but there is absolutly no
guaranty.
--
Stefan Bethke [EMAIL PROTECTED] Fon +49 170 346 0140
___
freebsd-questions@freebsd.org mailing list
http
version of the ports tree. If you haven't done so already,
install sysutils/portupgrade; that makes it easy to upgrade the ports
that are installed on your system.
Stefan
--
Stefan Bethke [EMAIL PROTECTED] Fon +49 170 346 0140
___
freebsd-questions
(OpenSSH SSH-2
private key)
PuTTY does not support OpenSSH key file formats. You will need to
convert them to PuTTY format with PuTTYgen.
Stefan
--
Stefan Bethke [EMAIL PROTECTED] Fon +49 170 346 0140
___
freebsd-questions@freebsd.org mailing list
are... idiosyncratic, to be polite.
vtun has had major security issues in the past, so I would be wary,
but I haven't looked into it for the past two years.
pfSense is a FreeBSD-based firewall/routing OS, so you'd need to
replace your existing FreeBSD routers with it, or add additional boxes.
Stefan
mounted determines the ownership
and access rights on it. By default, newfs will assign is to root
and set the rights to 0755. You'll need to chown the directory to
the desired user.
Stefan
--
Stefan Bethke [EMAIL PROTECTED] Fon +49 170 346 0140
.
If you want to *always* boot into FreeBSD, irrespective of the choice
you made the last time, you can use the boot0cfg(8) utility to stop
boot0 from remembering the last choice and stick to the stored
default. Untested:
# boot0cfg -o noupdate -s2
Stefan
--
Stefan Bethke [EMAIL PROTECTED
and _ANSI_SOURCE for C90
code. Both don't include the pthread.h header.
Stefan
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
,
but that is not guaranteed. If you want to use these packages, you
should have a fairly recent stable release.
To sum it up: you can install/upgrade the ports, but you cannot
install the stable packages on a security release.
Stefan
--
Stefan Bethke [EMAIL PROTECTED] Fon +49 170 346
-
RELEASEformat=html
HTH,
Stefan
--
Stefan Bethke [EMAIL PROTECTED] Fon +49 170 346 0140
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
Am 02.08.2006 um 15:18 schrieb Лукьяненко Александр:
Hi, all!
Problem: PC with FreeBSD, there are 2 gateway GW1 and GW2, GW1 is
default.
Need: Queries that come from GW2 goes through GW2, not through
default.
How can I do it?
Look at ipfw forward rules, or pf rdr rules.
Stefan
--
Stefan
is correct.
Stefan
--
Stefan Bethke [EMAIL PROTECTED] Fon +49 170 346 0140
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
-
+ rm -f $(EXAMPLES) *.o *.core
using FreeBSD 6.1-RELEASE
--
Gruss
Stefan Kuttler (B.O.F.H.).ooO=Ooo.https://www.netbeisser.de
GPG Fingerprint: E7AC 1E9B 87D8 5BD2 E2F2 6F4A 3177 ED68 8185 480C
___
freebsd-questions@freebsd.org
FreeBSD to simply say: You rock, mate!
Cheers, Stefan
On Fri, Feb 24, 2006 at 10:48:05AM +1030, Greg 'groggy' Lehey wrote:
Ten years ago today, on 24 February 1996, I submitted for publication
the final version of the first ever book on FreeBSD, Installing and
Using FreeBSD. It was later
(shouldbe, reallyis)
usr/src:
gid (9, 0)
When I label it with gid 9 which is the group man I don't get a
security hint. But why would or should I label /usr/src with group-
privilegies man?
Is this the default behaviour? I'm running FreeBSD RELENG_6_0
Best regards,
Stefan
PGP.sig
your right ;-) I did a second run and everything went fine.
Now I know what went wrong. Everytime I saw this message I changed
the group and that was the reason why I became every day this message.
Thanks for your quick response.
Best regards,
Stefan
PGP.sig
Description: This is a digitally
is no problem, so I think the problem must be somewhere else?!
Best regards,
Stefan
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
Is there a way to enable automatic acoustic management?
atacontrol cap states that the drive is capable but I couldn't find a
way to enable it.
Feature Support EnableValue Vendor
write cacheyes yes
read ahead yes
Greg 'groggy' Lehey wrote:
[Sequence recovered--see http://www.lemis.com/email/email-format.html]
On Thursday, 13 October 2005 at 17:56:11 +0200, Stefan Cars wrote:
Greg 'groggy' Lehey wrote:
On Wednesday, 12 October 2005 at 9:27:17 +0200, Stefan Cars wrote:
Hi!
We are having troubles
0x0006 in ?? ()
#791 0x7fffe7b0 in ?? ()
#792 0x0017 in ?? ()
Cannot access memory at address 0x8000
Greg 'groggy' Lehey wrote:
On Wednesday, 12 October 2005 at 9:27:17 +0200, Stefan Cars wrote:
Hi!
We are having troubles with MySQL 4.1 on a amd64 (it's
Hi!
We are having troubles with MySQL 4.1 on a amd64 (it's crashing randomly
with Seg fault, signal 11. gdb bt says: Cannot access memory at address
0x8000). We have got information saying this is a 64bit related
issue and should be fixed by using the i386 version instead of amd64
(this
Hi!
From what I understand linuxthreads isn't available on amd64 ? What
could cause one mysqld process / thread to crash almost every 4th minute
like this ?
/S
Olivier Nicole wrote:
We are having troubles with MySQL 4.1 on a amd64 (it's crashing randomly
with Seg fault, signal 11. gdb bt
Hello,
you may use find ~ -some-usefull-options-and-arguments -exec mv {}
new-location
BTW: your mail is out of date.
best wishes,
Stefan
--On 30. September 2005 17:40:00 -0500 Brian John [EMAIL PROTECTED]
wrote:
Say I am at ~ and I have 10 directories inside named 1, 2, 3, 4 ,5, 6, 7
something which is maybe much more important and a strong need
for servers: native support for IBMs Tivoli Storage Manager! The linux
version is not working like in Linux :(
best wishes,
Stefan
___
freebsd-questions@freebsd.org mailing list
http
vmware disks with vmware version 3 if they
have not been created or used by a newer major release of vmware! If you
use now 4.x or 5.x you will probably not be able to use them, you may check
the vmware documentation at the vendors site for more information.
best wishes,
Stefan
, if you do not own an old vmware license.
best wishes,
Stefan
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
overwrite the existing installation...
Any pointers?
- Stefan
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
I think I just cracked it!
After initially creating the mirror with the live filesystem from the
installation cd, I used the expert install mode... there is an option
to re-scan for devices there... then the ar0 device is present.
I'm installing now. hope it works.
- stefan
On Jul 22
user by default.
Is it possible to add a default /usr/share/skel/dot.logout file to
FreeBSD?
-Stefan
--
GPG-encrypted mail welcome! -- ID:E970FCBE
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
.
Yes that's a way to work around. But it would be nice to have this
file by default.
-Stefan
--
GPG-encrypted mail welcome! -- ID:E970FCBE
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
It was fun while it lasted. Please stop.
If you have to, move this to chat.
--
Stefan Bethke [EMAIL PROTECTED] Fon +49 170 346 0140
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-arch
To unsubscribe, send any
a
more detailed failure description.
Stefan
The BTX loader fails right after the initial setup screen. I press any
option except install prompt and it fails.
I have :
Gateway ALR 9200
4 processor xeon 500's
1 gig ram
1 adaptec 3200S scsi card running modified raid 5
6 drives. 2
Sorry, should have added that it's in FreeBSD 5.3. Does anyone know if
there is any way to stress-test the PCI bus (preferably without external
cards)?
Regards,
Stefan Haglund
I have an IWILL KK266-R (VIA KT133A/686B) board with an 1.4GHz
processor running as a FreeBSD file web server
to
restrict it to, say, a certain group, you have to go with the second
solution I think (and add users in the samba user database).
Hope I got the issue correctly, else I dunno :-).
Regards,
Stefan Haglund
Hello,
I am using FreeBSD 5.3 with Samba 3.0.7,1.
I can read all files from a Windows
Could you output the /etc/fstab? As far as I know, the major difference
is that writing to NTFS isn't fully supported in Linux (last I checked).
Maybe there is something Samba tries to do, that conflicts with that.
Other than that I don't know, sorry. :-)
Regards,
Stefan Haglund
On Sat, 26 Mar
be causing these corruptions? Chipset?
NIC? RAID controller?
Regards,
Stefan Haglund
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
Hi!
I have a very strange problem with our firewall using ipfw2. Below is
my configuration file. The firewall is a briding firewall (em2,em3).
After a few seconds (7-12 seconds) of ICMP pings to a machine behind the
firewall suddenly starts blocking all traffic to that specific host.
This is
an 'autoconf' executable. I'v found different
versions as ports and packages, but they all only
seem to contain autoconfversion, where version
is one of [213, 253, 259].
What am I doing wrong ?
Thanks,
Stefan
___
freebsd-questions@freebsd.org
' in a number of places.
Regards,
Stefan
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
variables to get your application to find them.
Ok, thanks for the explanation.
Regards,
Stefan
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL
Hi!
I'm upgrading perl 5.8 from the ports on a FreeBSD 5.3 machine, the
problem is that alot of my installed modules doesn't work after the
update (just a minor update from 5.8.2 to 5.8.6), probably becuase the
@INC changed and did not include the mach directory of 5.8.2. Is this
right ? Why
1 - 100 of 213 matches
Mail list logo