On Fri, 5 Jul 2013 19:43:02 -0600 (MDT), Warren Block wrote:
I booted the 9.1 install CD, executed gpart destroy -F ada0, and
installed. After completing the install, boot fails with:
ERROR: No boot disk has been detected or the disk has failed.
That is a BIOS error, probably due to UEFI
is supposed to replace MBR and UEFI is the future.
Perhaps there is something in UEFI that can be tweaked to make it work
with GPT?
Yes. There should be some sort of legacy boot. In UEFI mode,
SecureBoot can be disabled, so with the correct partition layout FreeBSD
should boot even in UEFI (untested
Hi,
I bought an HP Pavilion p7-1597c [1] system last week. It is Intel Core
i5-3330, with a Seagate 1.5 TB SATA drive and 12 GB of memory, shipped with
Windows 8.
I have disabled Secure Boot and enabled Legacy device booting.
I am able to complete the install of FreeBSD 9.1/amd64 from the CD
, the only option for multi-boot on GPT disks
is EasyBCD or grub (untested). But really, a VM is far preferable to
multi-boot for many situations.
FreeBSD 8.4 wouldn't install because the installer didn't have device node
for /dev/ad4s1b in /dev in order to create the filesystems.
That sounds
Thanks for the reply. I appreciate your trying to help me.
On Fri, Jul 5, 2013 at 3:25 PM, Warren Block wbl...@wonkity.com wrote:
On Fri, 5 Jul 2013, James E. Pace wrote:
I bought an HP Pavilion p7-1597c [1] system last week. It is Intel Core
i5-3330, with a Seagate 1.5 TB SATA drive and
On Fri, 5 Jul 2013, James E. Pace wrote:
Thanks for the reply. I appreciate your trying to help me.
On Fri, Jul 5, 2013 at 3:25 PM, Warren Block wbl...@wonkity.com wrote:
On Fri, 5 Jul 2013, James E. Pace wrote:
I bought an HP Pavilion p7-1597c [1] system last week. It is Intel Core
You, sir, are a wizard. You magical incantations worked, and I now have a
bootable FreeBSD 9.1 system.
Use 'gpart destroy' again, and set up an MBR partitioning scheme:
http://forums.freebsd.org/showpost.php?p=149210postcount=13
I really, really appreciate your help.
James
On Fri, 5 Jul 2013, James Pace wrote:
You, sir, are a wizard. You magical incantations worked, and I now have a bootable FreeBSD 9.1 system.
?
? Use 'gpart destroy' again, and set up an MBR partitioning scheme:
http://forums.freebsd.org/showpost.php?p=149210postcount=13
I really, really
Hi,
since last freebsd-update fetch install I always get this message after
freebsd-update fetch:
The following files will be updated as part of updating to 9.1-RELEASE-p3:
/boot/kernel/linker.hints
but freebsd-update install doesn't install anything.
Is there something wrong with my system
On Mon, May 13, 2013 at 11:22:41AM +0200, Wolfgang Riegler wrote:
Hi,
since last freebsd-update fetch install I always get this message after
freebsd-update fetch:
The following files will be updated as part of updating to 9.1-RELEASE-p3:
/boot/kernel/linker.hints
but freebsd-update
Good to see you've finally been burned.
You'll never make that mistake again. :)
I liked that syntax:
ASD {
asd
} || {
bsd
}
mostly because of syntax highlighting, to be precise highlighting
of the second bracket of a pair at editors, nor VIM neither GEANY
highlight if/then/elif/else/fi
vermaden == vermaden verma...@interia.pl writes:
Good to see you've finally been burned.
You'll never make that mistake again. :)
vermaden I liked that syntax:
vermaden ASD {
vermaden asd
vermaden } || {
vermaden bsd
vermaden }
vermaden mostly because of syntax highlighting, to be
Emacs indents it nicely, and colorizes the
keywords so that it stands out.
Indentification is not a problem, it work both
in geany and vim.
Probably I haven't made clear what I meant ;)
Take a look at this picture:
http://ompldr.org/vZG50bQ
The brackets in that specific section (asd) are
And no difference on 8.3 :(
Should there have been a promote in there somewhere? It looks like
the boot env is still dependent on the very old zroot.
Hi,
I have just recreated from scratch Your zroot root
setup under VirtualBox and tested it deeply.
There was an interesting BUG in the
vermaden == vermaden verma...@interia.pl writes:
vermaden To the point, check these two code snippets, they should
vermaden do EXACLY the same, logic is the same, the differece is
vermaden only the syntax.
vermaden snippet 1:
vermaden [ ${MOUNT} -eq 0 ] {
vermaden zfs set
I have zfs-on-root using the classical documentation (everything under
zpool, possibly with some sub-mounts, but I've left those out lately).
Is there a way to transition my system to a form that beadm expects?
I tried just running it, and it's upset that zpool/ROOT doesn't exist.
Hi,
I
vermaden == vermaden verma...@interia.pl writes:
vermaden # fetch https://github.com/vermaden/beadm/blob/master/beadm
Heh. That's HTML. I think you want
fetch https://raw.github.com/vermaden/beadm/master/beadm
vermaden # chmod +x beadm
vermaden # ./beadm list
vermaden # ./beadm activate
Randal == Randal L Schwartz mer...@stonehenge.com writes:
vermaden == vermaden verma...@interia.pl writes:
vermaden # fetch https://github.com/vermaden/beadm/blob/master/beadm
Randal and after reboot, zfs set mountpoint=none zroot would also seem to
Randal clean that up.
Oh wait, it looks
Randal == Randal L Schwartz mer...@stonehenge.com writes:
Randal Oh wait, it looks like zroot is still holding 1.04G of data... will
Randal that ever go away? Shouldn't all the data be in the /ROOT/xxx
Randal items?
And worse, the things from the readme don't work:
locohost# ./beadm create
Randal == Randal L Schwartz mer...@stonehenge.com writes:
Randal This is FreeBSD 8.2.
And no difference on 8.3 :(
Should there have been a promote in there somewhere? It looks like
the boot env is still dependent on the very old zroot.
--
Randal L. Schwartz - Stonehenge Consulting Services,
On 5/4/2012 5:10 PM, Randal L. Schwartz wrote:
Randal == Randal L Schwartz mer...@stonehenge.com writes:
Randal Oh wait, it looks like zroot is still holding 1.04G of data... will
Randal that ever go away? Shouldn't all the data be in the /ROOT/xxx
Randal items?
And worse, the things
Hi,
I just tested your tool the last few days and I must say I love
it already. Though I can get one of the commands to work
- might be me or the syntax
beadm create [-e nonActiveBe | beName@snapshot] beName
I read it as you can do the following
beadm create beName@snapshot beName
Kalle Møller freebsd-questi...@k-moeller.dk:
And I forgot
If I do a create and destroy, I would assume my system
was back to same state, but you keep the snapshot
when I destroy the clone, dont know if its working as
intended (better safe to keep it than sorry) or you just
didn't think of
Is that correct or is it
beadm create -e beName@snapshot beName
Well neither of those seems to work for me, can you give an example of the use?
Thanks
Kalle
On Fri, Apr 27, 2012 at 1:08 AM, vermaden verma...@interia.pl wrote:
Hi,
I have just created new HOWTO [1] on how to use Boot Environments
beName@snapshot beName
Well neither of those seems to work for me, can you give an example of the
use?
Thanks
Kalle
On Fri, Apr 27, 2012 at 1:08 AM, vermaden verma...@interia.pl wrote:
Hi,
I have just created new HOWTO [1] on how to use Boot Environments on
FreeBSD with new created
Hi,
do you know manageBE? Google for it, it is the first
hit. This works for me like a charm since about a year.
Bye,
Alexander.
Hi,
yes I know and used manageBE for a while, I even mentioned it
in the HOWTO (quote below) but thought that making *beadm*
that is compatible with
Hi,
I have just created new HOWTO [1] on how to use Boot Environments on
FreeBSD with new created utility *beadm* that I put on SourceForge [2].
Feel free to send Your ideas/critique about it.
[1] http://forums.freebsd.org/showthread.php?t=31662
[2] https://sourceforge.net/projects/beadm
Hello
I'v got a notebook (HP Elite 2560p) which can boot from an exteral eSATA drive.
Can FreeBSD boot from there? Is it supported?
Kind regards,
--
Martin Schweizer
off...@pc-service.ch
PC-Service M. Schweizer GmbH; Bannholzstrasse 6; CH-8608 Bubikon
Tel. +41 55 243 30 00; Fax: +41 55 243
Martin Schweizer lists_free...@bluewin.ch wrote:
I'v got a notebook (HP Elite 2560p) which can boot from an exteral
eSATA drive. Can FreeBSD boot from there? Is it supported?
It seems as if it should work.
___
freebsd-questions@freebsd.org mailing
speed up that boot wait process.
Regards.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
this is related with that. Is there any option to use old TTY
subsystem on 8.0 or how can I speed up that boot wait process.
Regards.
I am having the same problem with a dual processor Intel board. Would be
interested if any setting can speed up the boot process.
Amitabh Kant
the POST completes. The keyboard goes dead (numlock and caps lock stop
working) and it never starts to load. I can't get the system to a point where
I can get an error to work with.
When I remove the 3ware card, the system boot fine. FreeBSD is
installed on my system's internal SCSI drives
immediatly
after
the POST completes. The keyboard goes dead (numlock and caps lock stop
working) and it never starts to load. I can't get the system to a point
where I can get an error to work with.
When I remove the 3ware card, the system boot fine. FreeBSD is
installed on my system's
shows the following: (for my
freeBSD diskless client testing scenario)
filename pxeboot;
next-server 192.168.16.5;
option root-path 192.168.16.5:/export/images/freeBSD;
-- pxeboot is the freeBSD /boot/pxeboot file I copied over to my
/tftpboot directory.
-- next server IP is the PXE/TFTPD/DHCP
is a linux host
2. DHCP - server - dhcpd.conf file shows the following: (for my
freeBSD diskless client testing scenario)
filename pxeboot;
next-server 192.168.16.5;
option root-path 192.168.16.5:/export/images/freeBSD;
-- pxeboot is the freeBSD /boot/pxeboot file I copied
- server - dhcpd.conf file shows the following: (for my
freeBSD diskless client testing scenario)
filename pxeboot;
next-server 192.168.16.5;
option root-path 192.168.16.5:/export/images/freeBSD;
-- pxeboot is the freeBSD /boot/pxeboot file I copied over to my
/tftpboot
: (for my
freeBSD diskless client testing scenario)
filename pxeboot;
next-server 192.168.16.5;
option root-path 192.168.16.5:/export/images/freeBSD;
-- pxeboot is the freeBSD /boot/pxeboot file I copied over to my
/tftpboot directory.
-- next server IP is the PXE/TFTPD/DHCP server ...
-- the NFS root
Hello,
I'have a Sony Vaio BGN-BX397XP.
I'have Windows XP and Mandriva installed, but I want use FreeBSD.
I cant boot with any CD, the system displays rapidly lines on the screen
incomprehensible, I have a picture for that.
I'have test 6.2, 6.3 and 7.0 beta 4 CDs
You can see on back the model
On Thursday 17 May 2007, David Landgren wrote:
Pieter de Goeje wrote:
On Thursday 17 May 2007, David Landgren wrote:
Heh,
ok, for extra bonus points, what/where is the code that makes the two
annoying BEEPs on shutdown? If I could compile that out, my life would
be complete :)
Pieter de Goeje wrote:
On Tuesday 15 May 2007, Sam Lawrance wrote:
On 14/05/2007, at 10:41 AM, Pieter de Goeje wrote:
On Sunday 13 May 2007, David Landgren wrote:
Sam Lawrance wrote:
On 13/05/2007, at 6:15 PM, Matthew Seaman wrote:
[...]
the drive, and likely to remain that way until the
On Thursday 17 May 2007, David Landgren wrote:
Heh,
ok, for extra bonus points, what/where is the code that makes the two
annoying BEEPs on shutdown? If I could compile that out, my life would
be complete :)
Thanks,
David
Hmm, I've never heard any beeps on shutdown... how do you shutdown
On 5/17/07, Pieter de Goeje [EMAIL PROTECTED] wrote:
On Thursday 17 May 2007, David Landgren wrote:
ok, for extra bonus points, what/where is the code that makes the two
annoying BEEPs on shutdown? If I could compile that out, my life would
be complete :)
Hmm, I've never heard any beeps on
On Thursday 17 May 2007, Pieter de Goeje wrote:
On Thursday 17 May 2007, David Landgren wrote:
Heh,
ok, for extra bonus points, what/where is the code that makes the two
annoying BEEPs on shutdown? If I could compile that out, my life would
be complete :)
Thanks,
David
Hmm, I've
Pieter de Goeje wrote:
On Thursday 17 May 2007, David Landgren wrote:
Heh,
ok, for extra bonus points, what/where is the code that makes the two
annoying BEEPs on shutdown? If I could compile that out, my life would
be complete :)
Thanks,
David
Hmm, I've never heard any beeps on shutdown...
On 17/05/07, David Landgren [EMAIL PROTECTED] wrote:
Pieter de Goeje wrote:
On Thursday 17 May 2007, David Landgren wrote:
Heh,
ok, for extra bonus points, what/where is the code that makes the two
annoying BEEPs on shutdown? If I could compile that out, my life would
be complete :)
I have an ASUS P4S800D motherboard with a Seagate 120GB Serial ATA disk. I
want to install on it FreeBSD 7.0 ZFS, but I have probed all options in
beastie screen and all freezed during boot process (usually when it reach
the CD/DVD type detection).
I'm now using that motherboard with FreeBSD
pepe perez wrote:
I have an ASUS P4S800D motherboard with a Seagate 120GB Serial ATA disk.
I want to install on it FreeBSD 7.0 ZFS, but I have probed all options
in beastie screen and all freezed during boot process (usually when it
reach the CD/DVD type detection).
I'm now using that
On Tue, May 15, 2007 at 07:42:17AM +, pepe perez wrote:
I have an ASUS P4S800D motherboard with a Seagate 120GB Serial ATA disk. I
want to install on it FreeBSD 7.0 ZFS, but I have probed all options in
beastie screen and all freezed during boot process (usually when it reach
the CD/DVD
instead of prompting?
This is
not the sort of thing I want to fiddle around experimenting,
so a
little guidance would be most appreciated.
fdisk -B -b /boot/mbr /dev/ad0
You installed the FreeBSD boot sector stuff, which gives you the
'press F1' business. Replace that with the standard mbr
default_selection=F1 (Slice 1)
... what do I have to do to say JFDI instead of prompting?
This is
not the sort of thing I want to fiddle around experimenting,
so a
little guidance would be most appreciated.
fdisk -B -b /boot/mbr /dev/ad0
You installed the FreeBSD boot sector stuff, which
default_selection=F1 (Slice 1)
... what do I have to do to say JFDI instead of prompting? This is
not
the sort of thing I want to fiddle around experimenting, so a little
guidance would be most appreciated.
fdisk -B -b /boot/mbr /dev/ad0
You installed the FreeBSD boot sector stuff, which gives you
/dev/ad0
You installed the FreeBSD boot sector stuff, which gives you the 'press
F1' business. Replace that with the standard mbr, which just boots
straight up.
Rather than replacing it, you can use boot0cfg to set a really short
timeout instead; in case you might want that functionality one
would be most appreciated.
fdisk -B -b /boot/mbr /dev/ad0
You installed the FreeBSD boot sector stuff, which gives you the
'press
F1' business. Replace that with the standard mbr, which just boots
straight up.
Rather than replacing it, you can use boot0cfg to set a really short
timeout
of thing I want to fiddle around experimenting, so a little
guidance would be most appreciated.
fdisk -B -b /boot/mbr /dev/ad0
You installed the FreeBSD boot sector stuff, which gives you the 'press
F1' business. Replace that with the standard mbr, which just boots
straight up.
Rather
guidance would be most appreciated.
fdisk -B -b /boot/mbr /dev/ad0
You installed the FreeBSD boot sector stuff, which gives you the 'press
F1' business. Replace that with the standard mbr, which just boots
straight up.
Rather than replacing it, you can use boot0cfg to set a really short
? This is
not the sort of thing I want to fiddle around experimenting, so a
little guidance would be most appreciated.
fdisk -B -b /boot/mbr /dev/ad0
You installed the FreeBSD boot sector stuff, which gives you the
'press F1' business. Replace that with the standard mbr, which just
boots straight
List,
I have a disk that has only FreeBSD on it, and so I would like to skip
the initial F1/FreeBSD prompt. boot0cfg -v ad0 says:
options=nopacket,update,nosetdrv
default_selection=F1 (Slice 1)
... what do I have to do to say JFDI instead of prompting? This is not
the sort of thing I want
to say JFDI instead of prompting? This is not
the sort of thing I want to fiddle around experimenting, so a little
guidance would be most appreciated.
fdisk -B -b /boot/mbr /dev/ad0
You installed the FreeBSD boot sector stuff, which gives you the 'press
F1' business. Replace that with the standard
Thomas Wahyudi [EMAIL PROTECTED] writes:
Hi, I have freebsd 6.1 and 6.2 RC1 and i trying to install to my
desktop computer using old motherboard ASUS P4S533 but everytime
install is finish and trying to boot from HD its make my coumputer
reboot and reboot again seems something wrong with boot
Hi, I have freebsd 6.1 and 6.2 RC1 and i trying to install to my desktop
computer using old motherboard ASUS P4S533 but everytime install is
finish and trying to boot from HD its make my coumputer reboot and
reboot again seems something wrong with boot loader, is there something
i can do to
After upgrading the ports suddenly the server does not reboot.
I get the menu 'Welcome to FreeBSD'; after pressing 1 (boot FreeBSD
default) the system halts with '/boot/kernel/acpi.ko text=0x43670
data=0x23c0+0x10f0 syms=[0x4+0x7ba+0x4+0xa828]
We tried acessing thru live cdrom whilst mounting
On 2006 Sep 19 , at 10:38, Jeff Cross wrote:
Adam Martin wrote:
On 2006 Sep 18 , at 17:39, Jeff Cross wrote:
Adam Martin wrote:
On 2006 Sep 18 , at 16:25, Jeff Cross wrote:
I am trying to run FreeBSD 6.1-RELEASE on a Dell PowerEdge 850 with
some
booting issues. I have searched the
Adam Martin wrote:
On 2006 Sep 18 , at 17:54, Adam Martin wrote:
On 2006 Sep 18 , at 17:39, Jeff Cross wrote:
Adam Martin wrote:
On 2006 Sep 18 , at 16:25, Jeff Cross wrote:
I am trying to run FreeBSD 6.1-RELEASE on a Dell PowerEdge 850 with
some
booting issues. I have searched the
Adam Martin wrote:
On 2006 Sep 18 , at 17:39, Jeff Cross wrote:
Adam Martin wrote:
On 2006 Sep 18 , at 16:25, Jeff Cross wrote:
I am trying to run FreeBSD 6.1-RELEASE on a Dell PowerEdge 850 with
some
booting issues. I have searched the archives and found someone
having a
problem
I am trying to run FreeBSD 6.1-RELEASE on a Dell PowerEdge 850 with some
booting issues. I have searched the archives and found someone having a
problem with the machine booting too fast but my problem is a little
different. My machine hangs up after the following line is displayed
during boot:
On 2006 Sep 18 , at 16:25, Jeff Cross wrote:
I am trying to run FreeBSD 6.1-RELEASE on a Dell PowerEdge 850 with
some
booting issues. I have searched the archives and found someone having
a
problem with the machine booting too fast but my problem is a little
different. My machine hangs up
Adam Martin wrote:
On 2006 Sep 18 , at 16:25, Jeff Cross wrote:
I am trying to run FreeBSD 6.1-RELEASE on a Dell PowerEdge 850 with some
booting issues. I have searched the archives and found someone having a
problem with the machine booting too fast but my problem is a little
different.
On 2006 Sep 18 , at 17:39, Jeff Cross wrote:
Adam Martin wrote:
On 2006 Sep 18 , at 16:25, Jeff Cross wrote:
I am trying to run FreeBSD 6.1-RELEASE on a Dell PowerEdge 850 with
some
booting issues. I have searched the archives and found someone
having a
problem with the machine booting
On 2006 Sep 18 , at 17:54, Adam Martin wrote:
On 2006 Sep 18 , at 17:39, Jeff Cross wrote:
Adam Martin wrote:
On 2006 Sep 18 , at 16:25, Jeff Cross wrote:
I am trying to run FreeBSD 6.1-RELEASE on a Dell PowerEdge 850 with
some
booting issues. I have searched the archives and found
On Tuesday 18 April 2006 00:17, Brian McKeon wrote:
Hello I'm having a problem restoring my backup of my FreeBSD
installation. I recently upgraded hardrives in my laptop and made
backups of my Gentoo and FreeBSD partitions. Gentoo restored with no
troubles BSD however... I have made a dump of
--- John Nielsen [EMAIL PROTECTED] wrote:
On Tuesday 18 April 2006 00:17, Brian McKeon wrote:
Hello I'm having a problem restoring my backup of
my FreeBSD
mount /dev/da0s1 /foobar fails with superblock
errors (obviously)
mount -t ext2fs /dev/da0s1 /foobar fails with
mount_ext2fs
Hello I'm having a problem restoring my backup of my FreeBSD
installation. I recently upgraded hardrives in my laptop and made
backups of my Gentoo and FreeBSD partitions. Gentoo restored with no
troubles BSD however... I have made a dump of my filesystems and copied
them onto an Ext2fs USB
on my desktop machine, but with no
luck.
When I boot in anything but Safe Mode, FreeBSD will hang at boot and
refuse to go further. I've tried to let have a go at it for 30
minutes, but the boot process didnt get any further.
When I try to boot the machine normally, it freezes at the following
Giorgios, i did it again!
sorry!
regards,
usleep
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
Hi.
I am trying to get FreeBSD 6.0 running on my desktop machine, but with no luck.
When I boot in anything but Safe Mode, FreeBSD will hang at boot and
refuse to go further. I've tried to let have a go at it for 30
minutes, but the boot process didnt get any further.
When I try to boot
Greetings,
I've got an HP Pavillion ze4610us laptop. I've burned a number
of FreeBSD 5 (and FreeSBIE 1.1) images to cd, and have had no
luck getting this system to boot from them. The same images
boot on other systems, and the laptop in question boots WinXP
CDs just fine.
I'm stumped, and
assist me in solving this problem and making FreeBSD boot
up?
Step 1: Try a modern release of FreeBSD like 5.4. 5.2.1 was an early
adopter's release not intended for production use.
Kris
pgpWlc0gCSUZG.pgp
Description: PGP signature
.
Booting [/boot/kernel/kernel] ...
/boot/kernel/kernel text=0x45d64c -
elf32_loadexec: archsw.readin failed
can't load 'kernel'
I successfully installed the same system on several other modern PCs.
Can anyone assist me in solving this problem and making FreeBSD boot
up?
--
Best regards,
Sergey
.
Booting [/boot/kernel/kernel] ...
/boot/kernel/kernel text=0x45d64c -
elf32_loadexec: archsw.readin failed
can't load 'kernel'
I successfully installed the same system on several other modern PCs.
Can anyone assist me in solving this problem and making FreeBSD boot
up?
--
Best regards,
Sergey
Ng Pek Yong wrote:
Did you run make buildworld before you run make
buildkernel?
Maybe kernel and world are out of sync on your
system.
Yes, that was the problem.
Looks like I have a lot to learn about FreeBSD ;)
You dont need make buildworld if you have not changed source
--- Christian Hiris [EMAIL PROTECTED] wrote:
On Saturday 10 September 2005 04:06:04, Ng Pek Yong
wrote:
--- Christian Hiris [EMAIL PROTECTED] wrote:
On Friday 09 September 2005 17:04:17, Ng Pek
Yong
wrote:
Hi,
I am having some problem with geom_mirror on a
On Saturday 10 September 2005 04:06:04, Ng Pek Yong wrote:
--- Christian Hiris [EMAIL PROTECTED] wrote:
On Friday 09 September 2005 17:04:17, Ng Pek Yong
wrote:
Hi,
I am having some problem with geom_mirror on a
freebsd
5.4.
I followed the steps described in
Hi,
I am having some problem with geom_mirror on a freebsd
5.4.
I followed the steps described in
http://people.freebsd.org/~rse/mirror/
and got geom_mirror up on a stock freebsd 5.4,
including / partition itself.
The problem came when I compiled the kernel. After
pulling in the latest source
On Friday 09 September 2005 17:04:17, Ng Pek Yong wrote:
Hi,
I am having some problem with geom_mirror on a freebsd
5.4.
I followed the steps described in
http://people.freebsd.org/~rse/mirror/
and got geom_mirror up on a stock freebsd 5.4,
including / partition itself.
The problem came
--- Christian Hiris [EMAIL PROTECTED] wrote:
On Friday 09 September 2005 17:04:17, Ng Pek Yong
wrote:
Hi,
I am having some problem with geom_mirror on a
freebsd
5.4.
I followed the steps described in
http://people.freebsd.org/~rse/mirror/
and got geom_mirror up on a stock
All:
I updated my nvidia drivers from the ports collection (Using the
WITH_LEGACY_GPU_SUPPORT option to add support for my GeFroce2 GTS).
During the upgrade process, my machine rebooted on it's own and now
when I boot I get the following error message:
FreeBSD 5.4-STABLE #0: Fri Jun 24 23:25:37
when you install a
new kernel
the makefile copies the original kernel folder (/boot/kernel) to
/boot/kernel.old and
/boot/kernel is replaced with the new one.
when you boot up freebsd and you get to the boot screen - select option
number 6. then
enter the following commands:
unload
load /boot
/kernel) to
/boot/kernel.old and
/boot/kernel is replaced with the new one.
when you boot up freebsd and you get to the boot screen - select option
number 6. then
enter the following commands:
unload
load /boot/kernel.old/kernel
boot
let me know if you make it into the OS and if you do
Hello.
I'm trying to install FreeBSD 5.3 on a HP Compaq DC7100 but it doesn't
want to boot after the installation. I've tried a few things here:
1) Installing with/without ACPI
2) Installing with BootMgr as well as Standard MBR
3) Entered the BIOS setup (F10) to look for solving options
And
On 2004-12-21 10:20, jsha [EMAIL PROTECTED] wrote:
Hello.
I'm trying to install FreeBSD 5.3 on a HP Compaq DC7100 but it doesn't
want to boot after the installation. I've tried a few things here:
1) Installing with/without ACPI
2) Installing with BootMgr as well as Standard MBR
3) Entered
Hey!
---
Abstract: I'm trying to install FreeBSD on a brand new HP Compaq.
But whether I install it with BootMgr or the standard MBR, the computer
won't enter the FreeBSD boot process. Instead, it reboots itself in an
infinite loop.
---
Thanks for the reply so far. FreeBSD still won't boot
On Tue, 21 Dec 2004 10:20:25 +0100
jsha [EMAIL PROTECTED] wrote:
Hello.
I'm trying to install FreeBSD 5.3 on a HP Compaq DC7100 but it
doesn't want to boot after the installation. I've tried a few things
here:
1) Installing with/without ACPI
2) Installing with BootMgr as well as
On Tue, 21 Dec 2004 18:12:38 +0100
jsha [EMAIL PROTECTED] wrote:
Hello.
How is it failing?
It reboots in an infinite loop.
I've tried almost every option the BIOS can offer me, like disabling
ACPI/APIC and DMA ... but to no good. I do not see any UNIX option
in it, even though it at
Jorn Argelo wrote:
You might want to consider installing a standard MBR during the installation
(so not the FreeBSD bootloader). Then only FreeBSD will boot if you have
selected the drive as the primary drive in the bios
Oh, that reminds me of another question.
I installed 5.3 on a Dell
Hello all.
I'm trying to install FreeBSD 5.3 (using the mini-installation ISO)
on my new HP/Compaq stationary. It has to Serial-ATA harddrives, and I
want one for FreeBSD and one for Windows.
I installed FreeBSD along with BootMgr, but it does not want to boot.
It just makes silly beeps. I am
when you say some kind :) You have to be
more specific. On other words, tell us exactly what you see.
You might want to consider installing a standard MBR during the installation
(so not the FreeBSD bootloader). Then only FreeBSD will boot if you have
selected the drive as the primary drive
jsha wrote:
Hello all.
I'm trying to install FreeBSD 5.3 (using the mini-installation ISO)
on my new HP/Compaq stationary. It has to Serial-ATA harddrives, and I
want one for FreeBSD and one for Windows.
I installed FreeBSD along with BootMgr, but it does not want to boot.
It just makes silly
Hello,
I'm about to setup a dual boot of linux + freebsd
(5.2.1-RELEASE) on a 160gb hard disk. I'd really
like linux and freebsd to share (be able to read
and write) the bulk of the disk so that I can work
in either environment freely.
FreeBSD's ext2fs kernel module would seem preferable
over
nothing, this
was solved by fixing the drive geometry with a win98 boot disk. Now
the problem is that it seems to not be finding the kernel or /boot
device or / partition.
Error message is as follows:
Disk error 0x1 (lba=0x45e080)
No /boot/loader
| FreeBSD/i386 BOOT
Default: 0:ad(0,a)/kernel
boot
[EMAIL PROTECTED] wrote:
I just recently got an old HP NetServer LH Plus
(specs):
Pentium 166MHz (dual processor board with single cpu)
128MB of RAM (DIMM's)
Mylex DAC960 RAID controller
5x 4.2GB SCSI RAID5 array.
--
At any rate, I've tried using my 4.3-RELEASE, 5.1-RELEASE cd's but those fail to
1 - 100 of 107 matches
Mail list logo
