On Thu, Feb 27, 2003 at 03:46:11AM -0800, Chris McCluskey wrote:
I'm having some issues with Sendmail with the MSP, and I have read so
many docs I have confused myself!
My issue is the following. I'm running 4.7p4 with the 8.12.x Sendmail.
I want to route all local mail to a central mail
ad4: DMA limited to UDMA33, non-ATA66 cable or device
ad6: DMA limited to UDMA33, non-ATA66 cable or device
ar0: 39083MB ATA SPAN array [4982/255/63] status: READY subdisks:
0 READY ad4: 39083MB Maxtor 6Y040L0 [79408/16/63] at ata2-master
UDMA33 ar1: 39083MB ATA SPAN array [4982/255/63]
On Thursday 27 February 2003 10:31, someone, possibly Len Conrad, typed:
The ata driver is quite strict on standards implementation. It could be
that the promise cables may not comply as strictly with the standard as
it would prefer. Try getting 80-conductor cables from a third party.
Hello after update FreeBSD to 4.7 stable and prepare the file
/etc/make.conf with the following lines:
SENDMAIL_CFLAGS=-I/usr/local/include/sasl -DSASL
SENDMAIL_LDFLAGS=-L/usr/local/lib
SENDMAIL_LDADD=-lsasl
and make buildworld breakes with the following error:
=== bin/rmail
cc -O -pipe
On Thursday 27 February 2003 10:43, someone, possibly Willie Viljoen, typed:
On Thursday 27 February 2003 10:31, someone, possibly Len Conrad, typed:
The ata driver is quite strict on standards implementation. It could
be that the promise cables may not comply as strictly with the
Hello,
Can anyone direct me to the source of commands and documentations for
setting up Vlan, Switching, Policy based routing commands and
documentations ?
Regards,
A. Hakeem, esq.
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in the body of the message
There are two things you might want to look at. First it trying to set the
modes manually after boot. This is not recommended, and I would not do it
unless on a read only file system, if setting the higher mode fails, or
fails partially, you might be in for a world of trouble. To do this, you
can
It seems Len Conrad wrote:
There are two things you might want to look at. First it trying to set the
modes manually after boot. This is not recommended, and I would not do it
unless on a read only file system, if setting the higher mode fails, or
fails partially, you might be in for a world
On Thursday, 27 February 2003 at 8:56:04 -, Abdul Hakeem wrote:
Hello,
Can anyone direct me to the source of commands and documentations for
setting up Vlan, Switching, Policy based routing commands and
documentations ?
For ipfilter look at http://www.pir.net/pir/ipf/ipf-howto.html
Kjell
On Thursday 27 February 2003 11:08, someone, possibly Soeren Schmidt, typed:
I've already thought of that and the guy on site says the Promise
cables are 18 inches.
Which is just about right...
-Søren
Strange, I was told 30cm emphatically by our local techie, but Søren did
write the
- Original Message -
From: Shantanu Mahajan [EMAIL PROTECTED]
Date: Thu, 27 Feb 2003 11:05:27 +0530
To: Tijl Coosemans [EMAIL PROTECTED]
Subject: Re: cat
+++ Tijl Coosemans [freebsd] [26-02-03 17:56 +0100]:
| I want to remove CRs from text files so what I did is this:
|
| cat
It seems Willie Viljoen wrote:
On Thursday 27 February 2003 11:08, someone, possibly Soeren Schmidt, typed:
I've already thought of that and the guy on site says the Promise
cables are 18 inches.
Which is just about right...
-Søren
Strange, I was told 30cm emphatically by our
On Thursday 27 February 2003 11:30, someone, possibly Soeren Schmidt, typed:
Strange, I was told 30cm emphatically by our local techie, but Søren
did write the driver, so he's probably more correct than my techie. My
mistake
:)
Well, point him at the ATA specs :)
It seems he was
On Thu, Feb 27, 2003 at 09:52:39AM +0100, Megias Sanchez, Jose Manuel wrote:
Hello after update FreeBSD to 4.7 stable and prepare the file
/etc/make.conf with the following lines:
SENDMAIL_CFLAGS=-I/usr/local/include/sasl -DSASL
SENDMAIL_LDFLAGS=-L/usr/local/lib
SENDMAIL_LDADD=-lsasl
- Original Message -
From: Matthew Seaman [EMAIL PROTECTED]
Date: Wed, 26 Feb 2003 17:14:56 +
To: [EMAIL PROTECTED]
Subject: Re: cat
On Wed, Feb 26, 2003 at 05:56:13PM +0100, Tijl Coosemans wrote:
I want
Sip
(Note too the influence of the Society for the Suppression of
Greetings -questioneers. I am having trouble getting started with
cups. It seems to install okay. lpstat and lpinfo can be induced to give
the expected results, i.e.:
[EMAIL PROTECTED]:/usr/local/sbinlpinfo -v
network socket
network http
network ipp
network lpd
direct
Hi all,
I'm tried to set up French locale and console character set on the
latest stable,
but some character after configuration look like they should not (for
example pseudo
graphic characters in sysinstall). Here is what I have done:
Added to rc.conf:
font8x8=iso-8x8
font8x14=iso-8x14
mx# dmesg
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.7-RELEASE #0: Wed Oct 9 15:08:34 GMT 2002
[EMAIL
On Wed, Feb 26, 2003 at 10:01:46AM -0500, Asenchi wrote:
To add on to what everyone else said, I would do this also:
Option Protocol auto
Option Device /dev/ums0
This should fix your problem. I would take moused_enable=NO
completely out of rc.conf or comment it.
On Wed, 26 Feb 2003, Thanos Tsouanas wrote:
Hello everyone..
I am having a similar problem which wont fix with those :(
Im using 4.7-stable and a logitech usb mouse with wheel...
from the XF86Config file...
Section InputDevice
Identifier Mouse0
Driver mouse
Option Protocol MouseSystems
Why can't I run seejpeg as a normal user?
I am told you must be the owner of the current console ...
But I AM the owner of /dev/console. I have option uconsole
in the kernel and I have /dev/ttyv0 0600 /dev/console in
/etc/fbtab. That makes me the
the port in question is in
/usr/ports/devel/pth and is GNU Pthreads.2.0
I assumed that the mod_php4 port automaticly did the right thing; it
tries to install GNU pthreads, but that install fails with the error
messages i reported. So if anyone's confused it's the mod_php4 port...
If GNU
Hello,
I installed FBSD 4.7 a couple days ago on an old P100 to replace my
linksys cable router. I've rebuilt the kernel and have done everything
else to enable the machine to act as router/firewall. The only problems
I am having is setting up the ipfw rules. I've spent the last 2 days
trying
Joakim Lundborg wrote:
the port in question is in
/usr/ports/devel/pth and is GNU Pthreads.2.0
I assumed that the mod_php4 port automaticly did the right thing; it
tries to install GNU pthreads, but that install fails with the error
messages i reported. So if anyone's confused it's the mod_php4
Hello,
how can I determine the active console?
-Hanspeter
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in the body of the message
Hello guys and gals,
Im running Freebsd 5.0 on my laptop, because it does find my cardbus
network card. Unlikely with linux.
I need to run an office package for school and i dont want to use
windows. So i installed fbsd5.0, but
when i install openoffice from the tarballs given on the site
Hi all,
I was wondering if it was possible to bring up the KDE start
menu when I press my Windows key on my keyboard? I know
the key code of that key (i think its 215 offhand) and I have
used xmodmap to reprogram that key to display a comma for
example. Would be great to be able to bring up the
Kris Kennaway wrote:
Well, do you have libsasl installed?
Kris
Hello I have installed cyrus-sasl2. Here is the pkg_info:
cyrus-sasl-2.1.12 RFC SASL (Simple Authentication and Security Layer)
and the libsasl libraries installed are:
/usr/local/lib/sasl2/libsasldb.so.2
On Thursday 27 February 2003 14:45, someone, possibly Alistair Phillips,
typed:
Hi all,
I was wondering if it was possible to bring up the KDE start
menu when I press my Windows key on my keyboard? I know
the key code of that key (i think its 215 offhand) and I have
used xmodmap to
On 2003-02-26 17:21, Wes Peters [EMAIL PROTECTED] wrote:
I have a FreeBSD 4.6.2 system that has a strange mis-feature. This
machine is the primary MX for 2 domains; the other domain is
configured in the mailertable. When I start sendmail, everything
works fine, but after a while (not
On 2003-02-27 12:39, Hanspeter Roth [EMAIL PROTECTED] wrote:
Hello,
how can I determine the active console?
Use the tty(1) command:
: [EMAIL PROTECTED]:47]/home/giorgos$ tty
: /dev/ttyv1
: [EMAIL PROTECTED]:47]/home/giorgos$
/dev/ttyv0 is the first virtual console, ttyv1 the second, etc.
To
On 2003-02-26 23:47, Fozzy the Bear [EMAIL PROTECTED] wrote:
Everytime Cron tries to send me the results of the
daily output I get:
sendmail(24163]: h1QB4MMr024163: losing ./qfh1QB4MMr024163: savemail panic
sendmail(24163]: h1QB4MMr024163: SYSERR(root): savemail: cannot save rejected email
On Wed, Feb 26, 2003 at 09:05:32PM -0800, Kris Kennaway wrote:
FYI
Thanks, Kris!
Hi James,
- Forwarded message from James A. Arnold [EMAIL PROTECTED] -
Date: Wed, 26 Feb 2003 15:56:17 -0500
To: [EMAIL PROTECTED]
From: James A. Arnold [EMAIL PROTECTED]
Subject: OpenSSL problem
- Original Message -
From: Aaron Burke [EMAIL PROTECTED]
To: Brian Henning [EMAIL PROTECTED]
Sent: Wednesday, February 26, 2003 1:36 PM
Subject: RE: isp connection woes
(snip)
i now know that i am having problems connecting to my dhcp server.
can you try the following? (after first
- Forwarded message from James A. Arnold
[EMAIL PROTECTED] -
Date: Wed, 26 Feb 2003 15:56:17 -0500
To: [EMAIL PROTECTED]
From: James A. Arnold [EMAIL PROTECTED]
Subject: OpenSSL problem
I now get this error when trying to run a shell program using wget
/usr/libexec/ld-elf.so.1:
Hi,
I have the following simple test script:-
#! /bin/sh
cd /root/bin/
/usr/local/bin/wget --glob=on -N --passive-ftp
ftp://ftp.nai.com/pub/antivirus/superdat/intel/sdat4???.exe;
This should
On Thu, 27 Feb 2003, Izzy wrote:
Hello guys and gals,
Im running Freebsd 5.0 on my laptop, because it does find my cardbus
network card. Unlikely with linux.
I need to run an office package for school and i dont want to use
windows. So i installed fbsd5.0, but
when i install openoffice
Hi all,
hope someone is feeling charitable today to help with this problem,
I have a freebsd 4.0 server with sendmail 8.9.3
that is acting as an open relay server now.
beginning to get lost after trying so many ways to stop it.
any help will be most appreciated.
thanks
Walt
To
Hello-
I just bought a new motherboard, the ASUS A7N8X (not deluxe). I want to use it
for my new FBSD machine. I actually want to use my old graphics card (AOpen
NVidia Riva TNT2 Model 64, 32MB, 4x AGP) in that machine for now because i don't
want to buy a new graphics card. My problem is i can't
Hi:
I'm receiving these errors when I do make install, does anyone
know why ?
Please reply to my email address because I'm not subscribed to
these lists
Thanks.
gmake[4]: Entering directory
`/home2/ports/net/linphone/work/linphone-0.9.1/oRTP/src'
/bin/sh ../libtool --mode=link cc -O -pipe
The ultimate answer is that the shell interpets the first,
truncating the output file to 0.
Quickest way to make a file null bytes long (in sh type shells, not
in (t(csh) type):
$ filename
In bash (also in ksh I think) you can tell the shell not to clobber an existing file,
I think the command
I have a freebsd 4.0 server with sendmail 8.9.3
that is acting as an open relay server now.
beginning to get lost after trying so many ways to stop it.
any help will be most appreciated.
Check out the access and relay-domains files for sendmail.
Tons of info in google regarding how these
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Thu, 27 Feb 2003, Walt wrote:
I have a freebsd 4.0 server with sendmail 8.9.3
that is acting as an open relay server now.
beginning to get lost after trying so many ways to stop it.
any help will be most appreciated.
You can upgrade to 8.12.7
At 10:30 AM 2.27.2003 -0500, Walt wrote:
Hi all,
hope someone is feeling charitable today to help with this problem,
I have a freebsd 4.0 server with sendmail 8.9.3
that is acting as an open relay server now.
beginning to get lost after trying so many ways to stop it.
any help will be most
Hi !
I has been almost a month now that I have been trying to make my printer work
under FreeBSD.
I am now seeking for a direct help, I am totally confused.
Basically, everything always worked perfectly, but the quality is not here.
Is there anyone on the list who uses apsfilter+hpijs to
Hi !
Do you have any good feedbacks on USB harddrives with FreeBSD ?
I just bought one and it doesn't work... ;-( so before making a second
mistake, I wanted to be sure the next one I am going to buy works well.
Thanks a lot.
Antoine
To Unsubscribe: send mail to [EMAIL PROTECTED]
with
In [EMAIL PROTECTED], Antoine Jacoutot [EMAIL PROTECTED] typed:
I has been almost a month now that I have been trying to make my printer work
under FreeBSD.
I am now seeking for a direct help, I am totally confused.
Basically, everything always worked perfectly, but the quality is not here.
I have a 400MHz IBM Intellistation E-Pro (FreeBSD 4.6) running on a Belkin Home
Office UPS (F6H659-SER), with the control cable plugged into the first serial port.
When I installed FreeBSD I had it install upsd, thinking that would allow FreeBSD to
shut down properly if the power went away.
On Thursday 27 February 2003 17:35, Mike Meyer wrote:
I'm using magicfilter+stp to print to an hp desktjet with good results.
You don't have to convert to magicfilter (though it's much nicer than
apsfilter, but harder to install),
I just followed the Handbook... ;-)
but trying the stp driver
In [EMAIL PROTECTED], Antoine Jacoutot [EMAIL PROTECTED] typed:
On Thursday 27 February 2003 17:35, Mike Meyer wrote:
I'm using magicfilter+stp to print to an hp desktjet with good results.
You don't have to convert to magicfilter (though it's much nicer than
apsfilter, but harder to
On Feb 27 at 15:48, Giorgos Keramidas spoke:
On 2003-02-27 12:39, Hanspeter Roth [EMAIL PROTECTED] wrote:
Hello,
how can I determine the active console?
Use the tty(1) command:
But this seems to yield the tty from which the command was launched.
So if I do
sleep 9; tty
and then
On Thursday 27 February 2003 17:52, Mike Meyer wrote:
I know. The handbook walks you through the easiest
install. Magicfilter is a much less cpu-intensive solution, and
includs the ability to print things you can't print with apsfilter.
Allright, I'll have a look at it...
The stp driver is
On Thu, 27 Feb 2003, Antoine Jacoutot wrote:
Hi !
I has been almost a month now that I have been trying to make my printer work
under FreeBSD.
I am now seeking for a direct help, I am totally confused.
Basically, everything always worked perfectly, but the quality is not here.
Is there
[EMAIL PROTECTED], said on Thu Feb 27, 2003 [10:42:40 AM]:
} I have a 400MHz IBM Intellistation E-Pro (FreeBSD 4.6) running on a Belkin Home
} Office UPS (F6H659-SER), with the control cable plugged into the first serial port.
} When I installed FreeBSD I had it install upsd, thinking that
On Thursday 27 February 2003 18:34, P. U. Kruppa wrote:
here. Is there anyone on the list who uses apsfilter+hpijs to print to a
Hp Deskjet printer ?
Yes, I do and it works fine.
Thank god... maybe you could help me...
Why?
I can't have a good quality printing with
On Thu, Feb 27, 2003 at 06:59:49PM +0100, Antoine Jacoutot wrote:
On Thursday 27 February 2003 18:55, chuck odonnell wrote:
we use it here. it works like a charm, and the quality is
excellent. we print to it from FreeBSD desktops and Mac OS (shared via
netatalk). do you have any specific
On Thursday 27 February 2003 19:01, P. U. Kruppa wrote:
apsfilter is a tool to help you configure your printcap file.
Please
# cd /usr/local/share/apsfilter
and
# ./Setup
Please don't make fun of me, I am REALLY looking for help here.
Thanks.
Antoine
To Unsubscribe: send mail to [EMAIL
=
It's all a matter of perspective. You can choose your view by choosing where to stand.
--Larry Wall
__
Do you Yahoo!?
Yahoo! Tax Center - forms, calculators, tips, more
http://taxes.yahoo.com/
To Unsubscribe: send mail to [EMAIL
On Thursday 27 February 2003 19:07, chuck odonnell wrote:
mabe it's what we're printing?
I wish that was it, but no, I print ps, jpeg, png... files, and the quality is
always the same, very bad... :-(
I just set up a Redhat box for testing 5 minutes ago to try the hpijs
driver... the quality
On Fri, Feb 21, 2003 at 02:26:02PM +0100, Wiroth Didier wrote:
From: Wiroth Didier [EMAIL PROTECTED]
Subject: Re: mount_ntfs fails
To: [EMAIL PROTECTED]
Date: Fri, 21 Feb 2003 14:26:02 +0100
On Fri, 21 Feb 2003 13:15:03 +
Daniel Bye [EMAIL PROTECTED] wrote:
On Fri, Feb 21, 2003 at 01:54:57PM
On Thursday 27 February 2003 19:15, P. U. Kruppa wrote:
aps1|ijs/DESKJET_990;r=600x600;q=high;c=full;p=letter;m=auto:\
These are your default printer settings, if you need higher
resolution or quality you can either change the defaults or print
with
I need to install 5.0 via floppy disks. The /bin does not exsist in 5 only
/base. Will the /bin directions from the handbook work the same?
Is there a way to do a min install with floppies and then use
/stand/sysinstall to finish it off?
This is the break down, IBM ThinkPad 765D, to old to boot
--
___
Get your free email from http://www.fastermail.com
Powered by Outblaze
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in the body of the message
On Thu, 27 Feb 2003, Antoine Jacoutot wrote:
On Thursday 27 February 2003 19:15, P. U. Kruppa wrote:
aps1|ijs/DESKJET_990;r=600x600;q=high;c=full;p=letter;m=auto:\
These are your default printer settings, if you need higher
resolution or
Hello, FreeBSD hackers!
And here is my problem:
I use FreeBSD-4.7 Stable at home. My machine also provides an Internet access
in our local network. That's why I set different firewalls, ipfilters and other
stuff to provide the security in our private net. So, I'd also like to defend
my server from
When I want to print something I just convert it to
post script and feed it to gs which knows how to talk
to printers. Read the gs man page to see how to do it.
Wayne
--- Antoine Jacoutot [EMAIL PROTECTED] wrote:
Hi !
I has been almost a month now that I have been
trying to make my
On Thursday 27 February 2003 19:37, you wrote:
When I use quality=photo a printout takes about 10 minutes and
looks quite good.
You are so lucky...
Perhaps you should subscribe to apsfilter's mailing list and ask
them.
I already did... no answer yet...
(... and sorry, I didn't want to
On Thursday 27 February 2003 19:39, you wrote:
When I want to print something I just convert it to
post script and feed it to gs which knows how to talk
to printers. Read the gs man page to see how to do it.
Ok, but this is not the problem though...
I already printed postript files under
Hello-
when i run the following command i get the results that follow this command.
if i wanted to skip the logging part of this is there a parameter that i can
pass to cvs to not ask for these comments and just commit the changes..
cheers,
brian
cvs commit work_helpfiles
CVS:
Hello-
I installed gcc32 from pkg_add and i went to try to compile a java program with
the following command.
[EMAIL PROTECTED] ~ gcj32 Hello.java
gcj32: libgcj.spec: No such file or directory
where can i find this file and where should i put it?
thanks,
brian
To Unsubscribe: send mail to
Hello,
Is there a way to put some extra configuration on rc.conf so
clear_tmp_enable would only clean objects older than X days or so?
thanks
Paulo Roberto
__
Do you Yahoo!?
Yahoo! Tax Center - forms, calculators, tips, more
On 2003-02-27 17:58, Hanspeter Roth [EMAIL PROTECTED] wrote:
On Feb 27 at 15:48, Giorgos Keramidas spoke:
On 2003-02-27 12:39, Hanspeter Roth [EMAIL PROTECTED] wrote:
Hello,
how can I determine the active console?
Use the tty(1) command:
But this seems to yield the tty from which
On Fri, Feb 28, 2003 at 02:38:04AM +0800, Tomazo Lujiano wrote:
Hello, FreeBSD hackers!
And here is my problem:
I use FreeBSD-4.7 Stable at home. My machine also provides an Internet access
in our local network. That's why I set different firewalls, ipfilters and other
stuff to provide the
They are backwards compatable, so there must be some other problem.
Ken
On Thu, 27 Feb 2003, Brian Henning wrote:
Hello-
I just bought a new motherboard, the ASUS A7N8X (not deluxe). I want to use it
for my new FBSD machine. I actually want to use my old graphics card (AOpen
NVidia Riva
Quoting Paulo Roberto [EMAIL PROTECTED]:
Is there a way to put some extra configuration on rc.conf so
clear_tmp_enable would only clean objects older than X days or so?
Yes, but you'll have to roll your own.
If you're running FreeBSD-5, you can take a look at editing /etc/rc.d/cleartmp
On Thu, Feb 27, 2003 at 12:51:02PM -0600, Brian Henning wrote:
when i run the following command i get the results that follow this command.
if i wanted to skip the logging part of this is there a parameter that i can
pass to cvs to not ask for these comments and just commit the changes..
On 2003-02-27 12:51, Brian Henning [EMAIL PROTECTED] wrote:
when i run the following command i get the results that follow this
command. if i wanted to skip the logging part of this is there a
parameter that i can pass to cvs to not ask for these comments and
just commit the changes..
It's
I have a 3Com 3c900-Combo and ifconfig is reporting that it was in
half-duplex mode, so I booted up my 3com dos utility book disk and
checked and it was at half-duplex so I changed it to full. ifconfig is
still reporting it being half-duplex. Do I need to reinstall the driver
or something? How
Hi
Could you post the output of ifconfig please?
Gordon
- Original Message -
From: Aaron Walker [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Thursday, February 27, 2003 8:47 PM
Subject: full/half duplex
I have a 3Com 3c900-Combo and ifconfig is reporting that it was in
half-duplex
Aaron Wrote: -
I have a 3Com 3c900-Combo and ifconfig is reporting that it was in
half-duplex mode, so I booted up my 3com dos utility book disk and
checked and it was at half-duplex so I changed it to full. ifconfig is
still reporting it being half-duplex. Do I need to reinstall the driver
or
Didn't you forget
#pw usermod uid -L french-class-name?
Best Regards,
Igor
-Original Message-
From: Igor Pokrovsky [mailto:[EMAIL PROTECTED]
Sent: Thursday, February 27, 2003 11:53 AM
To: [EMAIL PROTECTED]
Subject: font problems
Hi all,
I'm tried to set up French locale and console
I need to install 5.0 via floppy disks. The /bin does not exsist in 5
only /base. Will the /bin directions from the handbook work the same?
Is there a way to do a min install with floppies and then use
/stand/sysinstall to finish it off?
This is the break down, IBM ThinkPad 765D, to old
Upon further investigation I was able to use the default MBR by running
the fixit disk and using disklable -B da0s1. The question is, why must I
take this extra step every time I load FBSD on a scsi drive?
Regards,
Chris
On Tue, 25 Feb 2003, Chris Miller wrote:
It seems everytime I
I think I have spoke to you before, go here:
ftp://ftp.freebsd.org/pub/FreeBSD/releases/i386/5.0-RELEASE/floppies/
download kern.flp mfsroot.flp and fixit.flp (in case).
That should take care of what you want. Unless you don't have an
internet connection, in that case use a 5.0-release cd as
I just set up a 80 gig ide Maxtor drive in a Manhattan concepts usb2
3.5 drive enclosure using 4.7-release..I just added the drive in using
/stand/sysinstall .then post install config. I then fdisk'd and labeled
then mounted the drive. The drive and the usb2 mass storage unit were
recognized by
Hi!
I am trying to set up Apache2+PHP4 on a box running
4.7-RELEASE. I have done that before with no problems
for accessing local PostgreSQL servers, but this time
I need to connect to external databases running on a
couple of DEC AlphaServers running Tru64 Unix and
Oracle 7 and 8i. I`ve installed
Has anyone gotten the linux-ha project (http://linux-ha.org) working on
FreeBSD?
There's mention of it on the site, but not much more than that. There
doesn't seem to be
a port for it either.
What I need is a High Availability Clustering solution for FreeBSD for 2
servers.
If one goes down,
Hello-
i am trying to get familiar with gdb so i wrote this code knowing that i will
get a core dump.
when i try to run the following command i get some error about not being in the
proper format.
what can i do to remedy the problem?
thanks,
brian
gcc -ggdb gen_core.c
./a.out
gdb core
My Floppy and CD are in the same spot -
I think I have spoke to you before, go here:
ftp://ftp.freebsd.org/pub/FreeBSD/releases/i386/5.0-RELEASE/floppies/
download kern.flp mfsroot.flp and fixit.flp (in case).
That should take care of what you want. Unless you don't have an
internet
Title: T I T L E
, ,, .
!
(3 )
( (1+),)
My CD ROM and Floppy drive are in the same spot. FTP , CABLE , HEADLESS
will not Work. 4 sets of cables, 20 disks later nothing has changed, cept
my grey hair.
So Floppy is the ONLY way possible to do any kind of install so far as I
can see. No CD No CABLE No Nothing but floppies
So I need to
Hi peter,
Any advice would be greatly appreciated.
Have a look at HUT (High Uptime Project) :
http://www.bsdshell.net
and
http://www.aims.com.au/chris/cluster/
and
http://sporner.dyndns.org/freebsdcluster/ (sometimes down ;))
regards,
clem
To Unsubscribe: send mail to [EMAIL PROTECTED]
Hi, I have a Siemens USB Wireless SS1022 but haven't
seemed to get it to work with FreeBSD. Is USB Wireless
supported or unsupported but possible in FreeBSD?
Dought if the following will be of any use, but I took
it from the SS1022 Datasheet.
Details on the SS1022:
WLAN Type:802.11b
USB
On Thu, 27 Feb 2003, Craig St. Jean wrote:
Hi, I have a Siemens USB Wireless SS1022 but haven't
seemed to get it to work with FreeBSD. Is USB Wireless
supported or unsupported but possible in FreeBSD?
You might do better posting this on the freebsd-mobile list.
Lots of discussion of wireless
Title: AMERICAN LANGUAGE CENTER
AMERICANLANGUAGECENTER
MEANS/C:
- .
- .
- .
- .
- e.
- .
ENDS/:
- .
- .
- .
- .
!
!
!
. !
Learn how to speak & understand slang.
On Thursday 27 February 2003 22:37, [EMAIL PROTECTED] wrote:
I just set up a 80 gig ide Maxtor drive in a Manhattan concepts usb2
3.5 drive enclosure using 4.7-release..I just added the drive in using
/stand/sysinstall .then post install config. I then fdisk'd and labeled
then mounted the
On Thu, Feb 27, 2003 at 04:07:44PM -0600, Brian Henning wrote:
Hello-
i am trying to get familiar with gdb so i wrote this code knowing that i will
get a core dump.
when i try to run the following command i get some error about not being in the
proper format.
what can i do to remedy the
I am trying to install 4.7 on a system which has a
3Ware Escalade 7000-2 raid controller.
A look at the GENERIC configuration file shows
a twe controller for 3Ware raid subsystems. A
search of the FreeBSD docs and FAQ didn't offer
a lot of help. Google says it should work.
Configuration:
Aaron wrote: -
I have a 3Com 3c900-Combo and ifconfig is reporting that it was in
half-duplex mode, so I booted up my 3com dos utility book disk and
checked and it was at half-duplex so I changed it to full. ifconfig is
still reporting it being half-duplex. Do I need to reinstall the driver
or
On Tuesday, I subscribed to the e-mail version of freebsd-questions.
Because it generated messages at the rate of about two per minute all day
long, and I received them on my employer's computer, and just the amount of
time it took to delete the messages was interfering with my productivity, I
had
1 - 100 of 135 matches
Mail list logo
