On Sat, 25 Oct 2008 11:38:22 -0400, bofh42 [EMAIL PROTECTED] wrote:
Are you sure you are using the correct command to start the DHCP
client?
I'm not familiar with Archlinux, but on Debian linux the command
you
need is dhclient.
That's
I have a remote machine with KVM access that I'd like to format and
reinstall FreeBSD 7.0. I've succeded in formatting /dev/ad6 but not the main
drive, /dev/ad4.
Is it possbile to zero-fill format during the installation instead of simply
deleting and recreating partitions?
I've tried booting
On Mon, Oct 27, 2008 at 09:22:19PM +0100, clemens fischer wrote:
Jeremy Chadwick:
I think the bottom line here is that until someone steps up and
actually volunteers to fix the code, it will remain broken. (I don't
normally tote this attitude, but in this case it's applicable: this is
a
so good. Began Ralf's procedure for inserting ad4s1 into mirror/gm0. The
synchronization began and reached 6% when this little horror appeared:
ad6: FAILURE - READ_DMA status=51READY,DSC,ERROR error=40UNCORRECTABLE
LBA=134802751
GEOM_MIRROR: Request failed (error=5).
error=40UNCORRECTABLE LBA=134802751
Are you sure you don't have a bad hard disk? This looks to be like a
classic block/sector failure. This does not appear to be the infamous
famous DMA timeout problem, especially if this is the only error
you're getting.
he can temporarity boot with
Hi! I found that the freebsd system clock just stops when i shutdown or reboot
the computer. what is odd is that the clock in my BIOS shows the right time, so
it couldn't be that CMOS battery is dead.
How do i get around this so i wouldn't have to set the clock every time i boot
into freebsd?
On Tue, 28 Oct 2008 03:17:39 -0700 (PDT), Richard Smith [EMAIL PROTECTED]
wrote:
How do i get around this so i wouldn't have to set the clock every
time i boot into freebsd? and by the way, does freebsd use the
CMOS clock?
An idea would to use NTP to get the exact time from your
local atomic
On Tue, 28 Oct 2008 11:57:15 +0100 Jurjen Middendorp wrote:
If you do char *p = something, you can't write to that string (it's
a pointer into some stringtable: easy way to look at it :). You have
to use char p[] = something, then it's an array with enough storage
to write to :) maybe try
On Tue, Oct 28, 2008 at 12:04:49PM +0100, Wojciech Puchar wrote:
error=40UNCORRECTABLE LBA=134802751
Are you sure you don't have a bad hard disk? This looks to be like a
classic block/sector failure. This does not appear to be the infamous
famous DMA timeout problem, especially if this is
On Tue, Oct 28, 2008 at 10:21:00AM +, Bullet 446 wrote:
I have a remote machine with KVM access that I'd like to format and
reinstall FreeBSD 7.0. I've succeded in formatting /dev/ad6 but not the main
drive, /dev/ad4.
Is it possbile to zero-fill format during the installation instead of
On Tue, 28 Oct 2008 12:46:58 +0100 Polytropon [EMAIL PROTECTED] wrote:
On Tue, 28 Oct 2008 03:17:39 -0700 (PDT), Richard Smith [EMAIL PROTECTED]
wrote:
How do i get around this so i wouldn't have to set the clock every
time i boot into freebsd? and by the way, does freebsd use the
Hello!
I'm having serious problems with Adobe's Flash 9 and 10 on my FreeBSD-7/amd64
system.
If I try to use it directly with linux-firefox, the entire browser crashes
quickly. If I try www/nspluginwrapper with a native browser, the
wrapper-launched npviewer.bin seg-faults instead. Either
On Tue, Oct 28, 2008 at 12:22 PM, Jeremy Chadwick [EMAIL PROTECTED] wrote:
sysctl kern.geom.debugflags=16 then do the dd again.
Thanks Jeremy, that worked fine.
I STRONGLY recommend you add bs=64k to that dd statement, or else it's
going to take a million years. :-)
That's a good tip,
Hi,
I have two questions about VLANs on FreeBSD 6.3/7.0.
1.
I'm trying to understand whether HW VLAN filtering can be supported.
Looking at the code I can't find a proper ioctl that will inform the driver
about a vlan creation/destruction.
Is there a way of doing it?
2.
Second issue - is there
Jeremy Chadwick a écrit :
On Mon, Oct 27, 2008 at 12:56:30PM -0700, Chuck Swiger wrote:
On Oct 27, 2008, at 12:38 PM, FreeBSD wrote:
You need to keep your MaxClients setting limited to what your system
can run under high load; generally the amount of system memory is the
governing
On Mon, Oct 27, 2008 at 09:16:04PM -0700, Jeremy Chadwick wrote:
On Mon, Oct 27, 2008 at 09:56:56PM -0600, Steven Susbauer wrote:
Jerry McAllister wrote:
Maybe I am wrong, but I feel it shouldn't be necessary to waste
3 CDs
from installation if I have a high-speed permanent
On Tue, Oct 28, 2008 at 10:44:49AM -0400, Francis Dubé wrote:
Jeremy Chadwick a écrit :
On Mon, Oct 27, 2008 at 12:56:30PM -0700, Chuck Swiger wrote:
On Oct 27, 2008, at 12:38 PM, FreeBSD wrote:
You need to keep your MaxClients setting limited to what your
system can run under high
A prt of my daily security run:
triton.xxx.xxx.xxx kernel log messages:
+++ /tmp/security.VnqB8ZT6 2008-10-27 23:53:32.0 +0100
+em0: link state changed to DOWN
+em0: link state changed to UP
+em0: link state changed to DOWN
+em0: link state changed to UP
+em0: link state changed to
On Tue, Oct 28, 2008 at 12:01:28PM -0400, Jerry McAllister wrote:
On Mon, Oct 27, 2008 at 09:16:04PM -0700, Jeremy Chadwick wrote:
On Mon, Oct 27, 2008 at 09:56:56PM -0600, Steven Susbauer wrote:
Jerry McAllister wrote:
Maybe I am wrong, but I feel it shouldn't be necessary to
On Tue, Oct 28, 2008 at 05:26:03PM +0100, Jos Chrispijn wrote:
A prt of my daily security run:
triton.xxx.xxx.xxx kernel log messages:
+++ /tmp/security.VnqB8ZT62008-10-27 23:53:32.0 +0100
+em0: link state changed to DOWN
+em0: link state changed to UP
+em0: link state changed
Jeremy,
Uit een eerder bericht (28-10-2008 17:32):
No, because the messages are in the kernel log. The kernel itself does
not print timestamps, because that's silly.
Yes that is .true.
Try doing this:
Great, will do that! No 'watchdog timeout' events yet :-)
thanks for sharing,
Jos
Jeremy Chadwick a écrit :
On Tue, Oct 28, 2008 at 10:44:49AM -0400, Francis Dubé wrote:
Jeremy Chadwick a écrit :
On Mon, Oct 27, 2008 at 12:56:30PM -0700, Chuck Swiger wrote:
On Oct 27, 2008, at 12:38 PM, FreeBSD wrote:
You need to keep your MaxClients setting
On Oct 27, 2008, at 11:06 PM, kalin m wrote:
Jeremy Chadwick wrote:
On Mon, Oct 27, 2008 at 10:19:56PM -0400, kalin m wrote:
this is a bit OT but since bsd and os x have enough in common in
the core some people here might have dealt with an os x server
before..
ok. here is the
I cannot get my scsi scanner detected.
I'm using FBSD 8.0-current on i386.
I'm trying to connect a scsi scanner.
I've the following card:
ahc0: Adaptec 2940 Ultra SCSI adapter port 0xd800-0xd8ff mem 0xff8ff000-0xff8f
irq 10 at device 0.0 on pci1
ahc0: [ITHREAD]
aic7880: Ultra Wide Channel
Hello!
I also had some fight with Adobe's Flash player, but unfortunately without
success.
I remaing curios about any solution.
Laci
From: Mikhail Teterin [EMAIL PROTECTED]
To: [EMAIL PROTECTED]; [EMAIL PROTECTED]
Sent: Tuesday, October 28, 2008 1:59:23 PM
Hi!
I've got a question regarding the way that gmirror identifies what
components (if that is the right term) are included in a mirror.
I recently created a mirror over two disks, ad2 and ad4. After some
bios changes (activating PATA) these devices were changed to ad6 and
ad10 respectively.
The
This change requires kernel changes that may not be compatible with 6.X, I
am not sure,
I am not the owner of that code. Some reason you can't use 7.1 which will
have everything
you need?
TSO is a hardware feature, I have never tested this, but my suspicion is
that if
its enabled on the hardware
I wanna get some screenshots of my command-line-only system(8-current),how
can I perform this?
Thanks a lot,looking forward to your mail.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To
Em Ter, 2008-10-28 às 07:41 -0700, Dánielisz László escreveu:
Hello!
I also had some fight with Adobe's Flash player, but unfortunately without
success.
I remaing curios about any solution.
Laci
Me too, I am using a market aproach, that is:
I intend to persuade a notebook
On Tue, Oct 28, 2008 at 10:41 AM, Dánielisz László
[EMAIL PROTECTED] wrote:
Hello!
I also had some fight with Adobe's Flash player, but unfortunately without
success.
I remaing curios about any solution.
Laci
From: Mikhail Teterin [EMAIL PROTECTED]
Sent by Glyn Millington:
My solution was to install Wine and run the MS port of Firefox. So far
it works flawlessly for me.
This has two problems:
1. It requires a (licensed) Windows install handy.
2. The solution is only suitable for i386 -- not for amd64, which is
what I'm using.
Hello
I have about 10 machines that are NFS clients, 5 are new and 5 are
older. Anyway the new machine mount from the NFS server just fine.
The older machines mount; and I can ls /mnt/data/; BUT when I ls
/mnt/data/sc/ on the older machines this happens:
nfs server 192.168.10.162:/data: not
Sent by matt donovan:
FreeBSD 7.1 should work with flash9 myself I had no luck so far but
nox- does say it should work
I'm using 7.1-PRERELEASE as of Sep 23 and it does not work (yet?)
Juergen, please, confirm, that your fixes were committed after Sep 23 --
I'll be happy to rebuild/reboot in
Dánielisz László [EMAIL PROTECTED] writes:
Hello!
I also had some fight with Adobe's Flash player, but unfortunately without
success.
I remaing curios about any solution.
Szia!
To be honest I gave up with Flash for either the FreeBSD or Linux version
of Firefox. Couldn't get it to work
On Oct 28, 2008, at 9:49 AM, Francis Dubé wrote:
Here's an example of top's output regarding our httpd process :
54326 apache1 960 156M 13108K select 1 0:00
0.15% httpd
54952 apache1 960 156M 12684K select 1 0:00
0.10% httpd
52343 apache1 40
If your server is nfsv4 (freebsd 7.x)
the nfs protocol used is tcp.
The older machines (freebsd 5 or 6)
the nfs prococol is udp...
try to use the -T switch (mount_nfs option...) on the older machines
so they will use tcp...
hope this will help
Sergio
Hi--
On Oct 28, 2008, at 9:16 AM, zhenghua wang wrote:
I wanna get some screenshots of my command-line-only system(8-
current),how
can I perform this?
Thanks a lot,looking forward to your mail.
See man vidcontrol, as in:
The following command will capture the contents of the first
Victor Farah wrote:
Hello
I have about 10 machines that are NFS clients, 5 are new and 5 are
older. Anyway the new machine mount from the NFS server just fine.
The older machines mount; and I can ls /mnt/data/; BUT when I ls
/mnt/data/sc/ on the older machines this happens:
nfs server
Why is vlc (the CSS library specifically) unable to decode certain
CDs? Certain foreign film CDs work fine, but others, mostly US-based
Hollywood films don't. I was under the impression that vlc was able to
decode everything? I can hear audio on these DVDs, but the video is
weird blocks of color.
On Tue, Oct 28, 2008 at 01:49:34PM -0400, Mikhail Teterin wrote:
Sent by matt donovan:
FreeBSD 7.1 should work with flash9 myself I had no luck so far but nox-
does say it should work
I'm using 7.1-PRERELEASE as of Sep 23 and it does not work (yet?) Juergen,
please, confirm, that your fixes
On Tue, Oct 28, 2008 at 08:59:23AM -0400, Mikhail Teterin wrote:
Hello!
I'm having serious problems with Adobe's Flash 9 and 10 on my FreeBSD-7/amd64
system.
If I try to use it directly with linux-firefox, the entire browser crashes
quickly. If I try www/nspluginwrapper with a native
On Tue, 2008-10-28 at 14:08 -0400, Mikhail Teterin wrote:
Sent by Glyn Millington:
My solution was to install Wine and run the MS port of Firefox. So far
it works flawlessly for me.
This has two problems:
1. It requires a (licensed) Windows install handy.
2. The solution is
On Tue, 2008-10-28 at 14:34 -0400, Mikhail Teterin wrote:
Sent by Craig Butler:
gnash all the way for me..
Does it work with YouTube?
-mi
Some of the video's work on youtube with the gnash-devel
I think there is an issue with the videos that use the On2 VP62 codec...
(again
AWESOME this worked like a charm, I added -r=1024 to it and BAM works!
:) Thank you everybody!
Manolis Kiagias wrote:
Victor Farah wrote:
Hello
I have about 10 machines that are NFS clients, 5 are new and 5 are
older. Anyway the new machine mount from the NFS server just fine.
The older
Craig Butler writes:
The way forwards has to be to jump onto the gnash band wagon
I think that project is moving leaps and bounds.
The last time I tried it (2-3 months ago) gnash was no
more funnctional than Flash 9.
Why be tied into proprietary closed sourced drivel that the
On Tue, Oct 28, 2008 at 03:40:28PM -0200, User Lenzi wrote:
Em Ter, 2008-10-28 às 07:41 -0700, Dánielisz László escreveu:
Hello!
I also had some fight with Adobe's Flash player, but unfortunately without
success.
I remaing curios about any solution.
Laci
Me too, I am
On Tue, Oct 28, 2008 at 2:49 PM, Joachim Rosenfeld
[EMAIL PROTECTED]wrote:
Why is vlc (the CSS library specifically) unable to decode certain
CDs? Certain foreign film CDs work fine, but others, mostly US-based
Hollywood films don't. I was under the impression that vlc was able to
decode
Sent by Craig Butler:
gnash all the way for me..
Does it work with YouTube?
-mi
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
Quoting Daniel O'Connor [EMAIL PROTECTED] (from Tue, 28 Oct 2008
10:18:10 +1030):
On Tuesday 28 October 2008 01:31:16 M. Warner Losh wrote:
In message: [EMAIL PROTECTED]
Oliver Fromme [EMAIL PROTECTED] writes:
: Daniel O'Connor wrote:
: On Friday 24 October 2008 23:20:59 Peter
On Tuesday 28 October 2008 13:31:13 Craig Butler wrote:
The way forwards has to be to jump onto the gnash band wagon I
think that project is moving leaps and bounds.
Any idea how to get the Firefox plugin working? I installed it with PLUGIN
and GTK selected, and
I'm having issue with flash10 (yet somehow it was working before) and
my co-workers, they are able to run it just fine
I'm running CentOS 5.2, I know it's not FreeBSD, but still maybe
somehow would help...
kernel: npviewer.bin[26449]: segfault at rip
rsp
On Tue, Oct 28, 2008 at 02:08:43PM -0400, Mikhail Teterin wrote:
Sent by Glyn Millington:
My solution was to install Wine and run the MS port of Firefox. So far
it works flawlessly for me.
This has two problems:
1. It requires a (licensed) Windows install handy.
2. The solution is
Kirk Strauser wrote:
On Tuesday 28 October 2008 13:31:13 Craig Butler wrote:
The way forwards has to be to jump onto the gnash band wagon I
think that project is moving leaps and bounds.
Any idea how to get the Firefox plugin working? I installed it with PLUGIN
and GTK
On Tue, 28 Oct 2008 13:03:32 +0100 clemens fischer wrote:
On Tue, 28 Oct 2008 11:57:15 +0100 Jurjen Middendorp wrote:
If you do char *p = something, you can't write to that string
(it's a pointer into some stringtable: easy way to look at it
:). You have to use char p[] = something, then
Stefan Moro wrote:
Hi!
I've got a question regarding the way that gmirror identifies what
components (if that is the right term) are included in a mirror.
I recently created a mirror over two disks, ad2 and ad4. After some
bios changes (activating PATA) these devices were changed to ad6 and
On Oct 28, 2008, at 4:00 PM, Manolis Kiagias wrote:
If it is firefox3 you are talking about, create a symbolic link to
the actual plugins directory:
ln -s /usr/local/lib/browser_plugins/libgnashplugin.so /usr/local/
lib/firefox3/plugins
Well, that seems pretty obvious now. It leads me
Kirk Strauser wrote:
On Oct 28, 2008, at 4:00 PM, Manolis Kiagias wrote:
If it is firefox3 you are talking about, create a symbolic link to
the actual plugins directory:
ln -s /usr/local/lib/browser_plugins/libgnashplugin.so
/usr/local/lib/firefox3/plugins
Well, that seems pretty
On Oct 28, 2008, at 4:22 PM, Manolis Kiagias wrote:
The following excerpt from /usr/ports/UPDATING will completely
answer your question :)
Sigh. And I get onto other people for not reading that. :-D
--
Kirk Strauser
___
On Tue, Oct 28, 2008 at 4:39 PM, matt donovan [EMAIL PROTECTED] wrote:
Why is vlc (the CSS library specifically) unable to decode certain
CDs?
umm VLC hasn't been able to decode everything for quite a long time install
libdvdcss
I'll have to go back to that box and check, but I was under
On Tue, Oct 28, 2008 at 06:31:13PM +, Craig Butler wrote:
The way forwards has to be to jump onto the gnash band wagon I
think that project is moving leaps and bounds.
Why be tied into proprietary closed sourced drivel that the people who
write it aren't prepared to support a
Chuck Swiger a écrit :
On Oct 28, 2008, at 9:49 AM, Francis Dubé wrote:
Here's an example of top's output regarding our httpd process :
54326 apache1 960 156M 13108K select 1 0:00 0.15%
httpd
54952 apache1 960 156M 12684K select 1 0:00 0.10%
httpd
52343
Sorry I forgot to mention, all machines are FREEBSD6.3
Sergio de Almeida Lenzi wrote:
If your server is nfsv4 (freebsd 7.x)
the nfs protocol used is tcp.
The older machines (freebsd 5 or 6)
the nfs prococol is udp...
try to use the -T switch (mount_nfs option...) on the older machines
so
On Thursday 23 October 2008 10:36:15 Matthew Seaman wrote:
The X dependencies come in via php5-gd and pecl-pdflib. php5-gd depends on
gd, which depends on libXpm and t1lib which both depend on X libs.
pecl-pdflib itself depends on php5-gd. Turning off those two options will
keep you X free.
macromedia still doesn't support FreeBSD, while it's mostly matter of
recompiling.
if so - simply don't use it
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to
If I have understood things correctly, gmirror stores all relevant
information about the mirror in the last sector on the provider.
exactly. it doesn't matter how the disks are connected.
all data is in last sector.
for non-mirrored drives it's useful to use glabel to get the same
This change requires kernel changes that may not be compatible with 6.X, I
am not sure,
I am not the owner of that code. Some reason you can't use 7.1 which will
have everything
you need?
I'm bound to 6.3 and 7.0 at the moment. Does the vlan ioctls exist only from
7.1 and fourth?
If so,
On Tuesday 28 October 2008 17:53:20 Stefan Moro wrote:
But if this is the case, how does gmirror know that it should use (in
my example above) ad10 and not ad4 as the additional disk in the
mirror.
Or does gmirror use something else than the /dev entries to address disks??
I'm just curious
On Tuesday 28 October 2008 17:32:36 Jeremy Chadwick wrote:
On Tue, Oct 28, 2008 at 05:26:03PM +0100, Jos Chrispijn wrote:
A prt of my daily security run:
triton.xxx.xxx.xxx kernel log messages:
+++ /tmp/security.VnqB8ZT6 2008-10-27 23:53:32.0 +0100
+em0: link state changed to
Hi there,
Under FreeBsd 6.2 version,
while I was trying to install Krang software this is an error message below.
I set up compat5 and expat2 in /usr/ports to get libexpat. But it is still
not working.
Does anyone know how to get libexpat?
-- Error
Yony Yossef wrote:
Hi,
I have two questions about VLANs on FreeBSD 6.3/7.0.
1.
I'm trying to understand whether HW VLAN filtering can be supported.
Looking at the code I can't find a proper ioctl that will inform the driver
about a vlan creation/destruction.
Is there a way of doing it?
Hi, good day all. I am new to FreeBSD.
I tried to pkg_add -r a package (py-networkx), which tell me that:
Error: FTP Unable to get ftp://ftp.freebsd.org/pub/
FreeBSD/ports/i386/packages-7.0-release/Latest/py-networkx.tbz:
File unavailable (e.g., file not found, no access)
although I know that
Jeremy Chadwick said:
ad6: FAILURE - READ_DMA status=51READY,DSC,ERROR
error=40UNCORRECTABLE LBA=134802751
Are you sure you don't have a bad hard disk? This looks to be like a
classic block/sector failure.
I hadn't realized that a bad block would manifest itself with a message
about DMA.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of matt donovan
Sent: Tuesday, October 28, 2008 12:39 PM
To: Joachim Rosenfeld
Cc: freebsd-questions@freebsd.org
Subject: Re: vlc not decoding certain DVDs
On Tue, Oct 28, 2008 at 2:49 PM, Joachim
On Wed, Oct 29, 2008 at 11:14:34AM +0800, Canhua wrote:
Hi, good day all. I am new to FreeBSD.
I tried to pkg_add -r a package (py-networkx), which tell me that:
Error: FTP Unable to get ftp://ftp.freebsd.org/pub/
FreeBSD/ports/i386/packages-7.0-release/Latest/py-networkx.tbz:
File
Jeremy Chadwick wrote:
On Wed, Oct 29, 2008 at 11:14:34AM +0800, Canhua wrote:
Hi, good day all. I am new to FreeBSD.
I tried to pkg_add -r a package (py-networkx), which tell me that:
Error: FTP Unable to get ftp://ftp.freebsd.org/pub/
75 matches
Mail list logo
