Hi,
Cross posting to -scsi as it seems maybe related to my scsi
setup.
At least, the problems currently only appear when the scsi parts
are in use.
On Sat, Feb 21, 2004 at 02:47:49PM +1100, Tony Frank wrote:
Refer earlier thread on -stable for more background.
4.9-STABLE (cvsup 20th Feb)
hi.
i have a 3ware 7410 with 4 250G disk in a raid5 config.
at one point i lost a disk and for some reason the system
kernel paniced and rebooted. not knowing that the array
had gone to a degraded state i did a fsck and began
correcting errors that it found. after noticing a lot of
On Sat, 21 Feb 2004 11:52 am, David Bear wrote:
I recently replace an ait tape drive with another one of the same
model,, a sony sdx 300.
Now, when I try to do anything with /dev/sa0 like get status or
erase, I get a ton of errors. Below is the output of dmesg from
it. Do I need to remake
yes I can see it with
/dev/da*
On Sat, 21 Feb 2004, anubis wrote:
On Sat, 21 Feb 2004 1:56 am, RJ45 wrote:
Hello FreeBSD 5.2/alpha
I have 3 scsi disk, one of the disks I don;t know why is not
working. it is not seen by sysinstall and when I try to do
sauron# disklabel -e da2
Hi,
On Fri, Feb 20, 2004 at 07:37:49PM -0300, Roberto Pereyra wrote:
A question:
I want to configure a simple dial-up server and have this ppp.conf
--
default:
pap:
set debug phase lcp chat
set timeout 0 set debug phase lcp chat
enable pap
Hi there,
On Fri, Feb 20, 2004 at 01:38:39PM -, Dominic Bishop wrote:
I am shortly going to try and install a Belkin universal UPS on one of my
FreeBSD machines running 5.2 using the nut utility.
Something I've been thinking of doing for many months now.
Due to a failing in the Belkin
Hi,
On Fri, Feb 20, 2004 at 04:05:54PM -0800, Jim Pazarena wrote:
I have a wireless home network with an 802.11B router which assigns
IPs via DHCP.
what method is appropriate to access one fbsd box from another when
I don't actually know the IP which has been assigned to any given
box.
Hi,
On Sat, Feb 21, 2004 at 02:26:24AM +, Daniela wrote:
I'm having problems with an USB ADSL modem (Alcatel Speed Touch). It is
recognized at boot time, but when I try to connect, it tells me that the
modem is busy.
I symlinked /dev/cuaa3 to /dev/ugen1 (that's the device that showed up
Hello everyone!
In my localized version of FreeBSD developer's handbook (russian) I have found a
skeleton
example for writing custom kernel modules. But I can not find it's analog in original
english
version of the handbook. And if I do compile example given, computer stops responding
Hi, I have a hard drive which is on its last legs. I also have new hard
drive to replace the old one. I was wondering if it is possible to
simply copy everything from the old drive to the new (after formating
the new drive) and have my system back up and running, or do I need to
reinstall the OS
On 20 Feb 2004, at 01:35, Tiller Beauchamp wrote:
On Tue, 2004-02-10 at 06:25, James Gallagher wrote:
Hi Carl,
Just out of curiosity, do you have a firewall between your BSD box and
the cvs server you're trying to connect to? Alternatively, have you
tested another cvs server? The reason I ask
Hi there,
On Fri, Feb 20, 2004 at 09:17:37PM -0600, dap wrote:
Per the FreeBSD handbook, I have to follow the rule that for a specific host
I have to export everything the same for a particular filesystem. So let's
say I have one filesystem, /.
So I can't have:
/export1-roserver1
Hi there,
On Sat, Feb 21, 2004 at 09:38:41PM +1100, Tig wrote:
Hi, I have a hard drive which is on its last legs. I also have new hard
drive to replace the old one. I was wondering if it is possible to
simply copy everything from the old drive to the new (after formating
the new drive) and
Hi :)
I'm having a problem with FAM under KDE (3.2).
My homedirs are mounted using NFS and regularly, I get the following errors in
my logs:
kernel: pid 609 (fam), uid 1: exited on signal 6
Everything seems to work fine though, but I'm always concern about errors I
don't understand.
The
I've turned off all my sendmail options, IIRC, but /var/spool/clientmqueue
keeps getting filled up with messages about undelivered mail. How can I
stop this?
NOTE: Please CC me, as I am not currently subscribed. Thanks.
jm
--
My other computer is your windows box.
Hey dude,
looked at /usr/share/examples/kld/ yet?
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
Hello everyone,
Thank you for the answers,
True, I didnot use the full path for ipfw in my script.
when I added to the script /sbin/ipfw RULE_HERE everything works great.
I thought it will regonize the command ipfw by it self. well it didnot :)
Thank you again marty, nathan, Ion and all
On Sat, 21 Feb 2004 15:51:16 +0300
Marwan Sultan [EMAIL PROTECTED] wrote:
Hello everyone,
Thank you for the answers,
True, I didnot use the full path for ipfw in my script.
when I added to the script /sbin/ipfw RULE_HERE everything works
great. I thought it will regonize the command
Hello
Radeon7500 does not support AGP 1X.
Change the line in your XF86Config
Option AGPMode 1
to read as
Option AGPMode 2
.. or 4
Depending on if you have 2X/4X slot or only 2X or only 4X slot.
I use 2 for my intel 440bx
man radeon should give you the details.
PS Don't use pageflip
Hello
is there a framebuffer port for freebsd?
i want to run my console in 1024x768.
thanks
please cc to: [EMAIL PROTECTED]
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to
On Sat, Feb 21, 2004 at 12:20:19PM +, Jonathon McKitrick wrote:
I've turned off all my sendmail options, IIRC, but /var/spool/clientmqueue
keeps getting filled up with messages about undelivered mail. How can I
stop this?
NOTE: Please CC me, as I am not currently subscribed. Thanks.
Neil Camara [EMAIL PROTECTED] writes:
Hey guys, I don't know if this is the correct mailing to post this
question. Is it possible to implement mac filtering in freebsd running
hostap mode? If so, can someone share some links about it? Thanks. Neil
ipfw(8) can filter by MAC addresses.
--
Hello,
does anyone know with which CFLAGS the FreeBSD binary distribution is
compiled? It has -march=i386 allright, but does it have any -Ox?
GH
--
Powered by FreeBSD
___
[EMAIL PROTECTED] mailing list
At 12:21 AM 2/21/2004, Saint Aardvark the Carpeted wrote:
Jim Pazarena disturbed my sleep to write:
May sound rookie, but presently I go to each box and determine it's
IP directly and then I know the IP (at least for this session).
What I end up doing is browing the hosts file on my gateway
Tig [EMAIL PROTECTED] writes:
Hi, I have a hard drive which is on its last legs. I also have new hard
drive to replace the old one. I was wondering if it is possible to
simply copy everything from the old drive to the new (after formating
the new drive) and have my system back up and running,
On Fri, Feb 20, 2004 at 03:56:02PM +, Brian Candler wrote:
Here's what I get if I compile in and turn on USB keyboard debugging in
the kernel, and type asd as
a down, s down, a up, d down: this generates asds on screen.
I have just spent a couple of hours debugging and documenting the
hi,
i found a strange case, i have tested the three machines(PIII 800
FreeBSD4.9-stable,
P4-1.6G FreeBSD4.8-release, P4-2.0G FreeBSD5.2.1).
I use sysctl -a | grep machdep.tsc.freq to get the CUP speed. But, I
failed on the P4-1.6G machine. Nothing appears.
Should I set some additional
Daniela,
The ugen device means that there wasn't a kernel driver to handle the device.
I don't believe you can use the ugen device as a formatted device (like cuaa,
tty, etc).
What is the exact model of your modem? Most of the Alcatel SpeedTouch models I
looked at claimed to have a UTP network
Any idea why updating to 4.9 stable would give me this error?
I have to set it to protocol 1 and log in manually. The auto login with the
id_rsa and authorized_keys doesn't seem to work anymore, but gives this
error:
neptune:~ ssh [EMAIL PROTECTED]
key_verify failed for server_host_key
NOTE:
Hello
I want to set up 5.2 Release as an email server. I have
performed basic configuration of the sendmail config files
as outlined in the handbook
I installed cyrus imapd. I'm battling. Can't seem to find
a
straight forward setup guide. I installed it using passwd
password
Hi all.
I recently acquired a laptop whose world and kernel I'd like to have
built by a different machine on my LAN. Chapter 21.5 of the current
Handbook lays things out pretty well, but I do have a couple of questions
before proceeding.
The Handbook states: Finally[,] make sure that
Hi list,
does anybody have a clue, if the following is a hard or software error?
#
syslogd: kernel boot file is /boot/kernel/kernel
kernel:
kernel:
kernel: Fatal trap 12: page fault while in kernel mode
kernel: cpuid =
Hi D J Hawkey Jr,
you wrote.
DJHJ So, two machines use the same world, except that a laptop doesn't want
DJHJ profiled libraries or games. Since the install is separate from the build,
DJHJ the build machine's make.conf must _not_ define NOPROFILE nor NOGAMES,
If that machine itself wants those,
On Feb 21, at 05:56 PM, Gabriel Ambuehl wrote:
DJHJ Second, two machines are of the same architecture, but they have different
DJHJ CPUs: One is an Intel PIII, but the other is a PII. Will the world built
DJHJ on a PIII be correct for a PII? Similarly, will the kernel for the PII
DJHJ built
Hi list,
I have had the above error 2 times now during fsck after an unclean
shutdown. fsck -y yielded tons of entries in lost+found.
man (7) tuning says that softupdates guarantees filesystem consistency
in case of crash, but thousands of lost files tell a different story.
Did i miss anything?
Hi list,
does anybody have a clue, if the following is a hard or software error?
#
syslogd: kernel boot file is /boot/kernel/kernel
kernel:
kernel:
kernel: Fatal trap 12: page fault while in kernel mode
kernel: cpuid =
Dave Vollenweider [EMAIL PROTECTED] writes:
Been trying to install FreeBSD 5.2 using the kern.flp and mfsroot.flp images on
floppies and proceeding with a network install via FTP on an old Acer Aspire with a
Pentium 120 MHz processor and 80 MB of RAM on a 1.6 GB hard drive (the second on the
Hi, I have a hard drive which is on its last legs. I also have new hard
drive to replace the old one. I was wondering if it is possible to
simply copy everything from the old drive to the new (after formating
the new drive) and have my system back up and running, or do I need to
reinstall
On Fri, Feb 20, 2004 at 10:38:28AM -0500, Jerry McAllister wrote:
hi,
is there a way to convert ms powerpoint presentation into jpegs?
or to view it under Freebsd?
Install Openoffice. It has a presenter that can open Powerpoint
files to show them or incorporate them in to
I'm getting an Input/output error message when trying to mount a ufs
floppy (mount -o ro /dev/fd0 /mnt) in FreeBSD 5.2 (Stock).
Tried to duplicate this problem using a stock FreeBSD 4.9 with same
floppy/drive/system but it works perfect.
Both installs of FreeBSD are VMWare Guests (v4.0.5
I'm curious as to what the longest uptimes are people have seen on
production servers. We've got a FreeBSD machine here with an uptime of 506
days. It is a file server and it also runs spamassassin for another
machine. Too bad we have to take it down to replace a motherboard tonight
with
On Fri, Feb 20, 2004 at 09:10:17PM +0100, [EMAIL PROTECTED] wrote:
Hello,
does anyone know with which CFLAGS the FreeBSD binary distribution is
compiled? It has -march=i386 allright, but does it have any -Ox?
The default value of CFLAGS is -O -pipe (-pipe obviously has no
effect on the
I am running FreeBSD version 5.2.1.
While doing a ports install of GCC 3.4, everything went normally until the
following error message appeared on my screen. I have no idea what it means
or refers to. Perhaps someone can assist me.
gmake[2]: *** [fibheap.o] Error 1
gmake[2]: Leaving directory
On Sat, Feb 21, 2004 at 03:28:57PM -0500, [EMAIL PROTECTED] wrote:
I am running FreeBSD version 5.2.1.
While doing a ports install of GCC 3.4, everything went normally until the
following error message appeared on my screen. I have no idea what it means
or refers to. Perhaps someone can
Original Message
Subject: Re: Porstdb -uU Continues to Fail?
Date: Wed, 11 Feb 2004 13:55:48 -0500
From: Bob Perry [EMAIL PROTECTED]
To: Kris Kennaway [EMAIL PROTECTED]
CC: FreeBSD-Questions [EMAIL PROTECTED]
References: [EMAIL PROTECTED]
[EMAIL PROTECTED]
[EMAIL
Rahul Sawarkar [EMAIL PROTECTED] writes:
is there a framebuffer port for freebsd?
i want to run my console in 1024x768.
Why would you want a framebuffer for that?
Do you have frame grabber hardware or something?
If all you want is a 1024x768 video mode driving the
text console,
Hi
This is an auto-response to your mail to the Gauteng Linux User's
group address, [EMAIL PROTECTED] Please save this message, as
re-sending to the [EMAIL PROTECTED] address will not re-send it!
The Glug list was split into two separate lists on the 1st
June 2003. For more information, please
On Saturday, 21 February 2004 at 15:24:47 -0500, S wrote:
I'm curious as to what the longest uptimes are people have seen on
production servers.
http://uptime.netcraft.com/up/today/top.avg.html
I've known people with server uptimes of over 1000 days. It's rather
pointless to go
Hello,
Just upgrade to 4.9-RELEASE and CVSup'd my system today.
pkg_version -v listed mozilla-gtk2-1.6_2 as ? orphaned:
www/mozilla-gtk2. Also have mozilla-1.6_2,2 which was my
original browser. If I remember correctly, the gtk2 version
appeared after installing Galeon2 and provided
FreeBSD 4.8-Stable
okay I just installed XFree86 from /usr/ports -
now trying to upgrade emacs but look the build fails. any clue why?
--- snip ---
fcfreetype.c: In function `FcFreeTypeQuery':
fcfreetype.c:279: syntax error before `psfontinfo'
fcfreetype.c:738: `psfontinfo' undeclared (first
On 02/21/04 12:48 AM, David Carter-Hitchin sat at the `puter and typed:
Hi,
Does anyone out there know a good C++ memory profiling/debugging tool for
FBSD? I'm looking for a tool like valgrind or purify. I grepped around
in the ports directory and I found ElectricFence and mprof but these
On Sat, Feb 21, 2004 at 03:00:31PM -0800, Noah wrote:
FreeBSD 4.8-Stable
okay I just installed XFree86 from /usr/ports -
now trying to upgrade emacs but look the build fails. any clue why?
--- snip ---
fcfreetype.c: In function `FcFreeTypeQuery':
fcfreetype.c:279: syntax error before
Stop in /usr/ports/x11-fonts/fontconfig.
*** Error code 1
This is the fontconfig build failing, not emacs. Furthermore, it
looks like you do not yet have XFree86 installed, or you have an
inconsistent system, because the emacs build couldn't find
XFree86-4-libraries on your system
On Sat, Feb 21, 2004 at 03:16:39PM -0800, Noah wrote:
Stop in /usr/ports/x11-fonts/fontconfig.
*** Error code 1
This is the fontconfig build failing, not emacs. Furthermore, it
looks like you do not yet have XFree86 installed, or you have an
inconsistent system, because the
ouyang kai wrote:
i found a strange case, i have tested the three machines(PIII 800
FreeBSD4.9-stable,
P4-1.6G FreeBSD4.8-release, P4-2.0G FreeBSD5.2.1).
I use sysctl -a | grep machdep.tsc.freq to get the CUP speed. But, I
failed on the P4-1.6G machine. Nothing appears.
Should I set some
On Sat, Feb 21, 2004 at 02:47:56PM -0600, Jamie wrote:
I'm curious as to what the longest uptimes are people have seen on
production servers. We've got a FreeBSD machine here with an uptime of 506
days. It is a file server and it also runs spamassassin for another
machine. Too bad we
On Wednesday, 18 February 2004 at 11:52:09 +0100, Bjorn Eikeland wrote:
Yesterday I set up a vinum raid5 array on a fairly slow pc
(p3-500, 128mb pc100, udma66) and started the initializing,
but only to find vinum l showing the drives as 'State: I 38%'
and the vinum processes were gone this
.
Actually I guess the first thing to work out is why your system
thinks you still need to install XFree86. Can you please run the following
command:
pkg_info | grep XFree86
Kris
okay I make clean the XFree86 and started building one thing at a time and now
it looks like everything
Hello -
I'm trying to get my Apache web server up and running with PHP support but am running
into problems. When I try to go to a .php web page I'm prompted to save the page
instead of having the browser show the page.
I've installed both /usr/ports/www/apache21/ and
Uwe wrote:
Is the P4-1.6G machine a multi-processor system, that is, was the kernel
compiled with the SMP option? If so, there is currently no TSC support
on multi-processor systems, for technical reasons I understand. So in
this case 'machdep.tsc.freq' is omitted from the kernel and
Hello all,
I just installed NcFTP 3.1.7 out of the ports collection on my
recently-upgraded 4.9-STABLE system. When I try to run ncftp, though, it
bails with the following error message:
/usr/libexec/ld-elf.so.1: /usr/local/lib/libncftp.so: Undefined symbol
ServiceNameToPortNumber
I have not
Hello all,
I'm really screwed up my server last week, now I'm giving up on the 5.x
series as a server for a while, so I've installed 4.9. I took all my
backup files and placed them on a second harddrive in the system, hoping
to just mount that drive on the new 4.9 system and restore the
On Saturday 21 February 2004 20:47, Jamie wrote:
I'm curious as to what the longest uptimes are people have seen on
production servers. We've got a FreeBSD machine here with an uptime of 506
days. It is a file server and it also runs spamassassin for another
machine. Too bad we have to take
I cannot verify that any system has been up for 2300+ days but according to
Netcraft.com (http://uptime.netcraft.com/up/today/top.avg.html) there are some very
impressive uptimes out there.
Ben
___
[EMAIL PROTECTED] mailing list
Doesn't (or didn't?) Linux have a 'feature' that allowed ppl to save their
uptimes through a reboot? So, for instance, if it was a schedualed
reboot, uptime still showed one continuous uptime? I'd imagine that this
would be saved through upgrades as well ...
Not sure of the accuracy of this,
I guess I forgot to mention that I did search the archives for this
problem. There was a post about this back in January, but a slightly
different application.
How would I go about using a CDROM to boot from, obtain my data, move it
to a real partition, and reboot my regular OS?
Eric F Crist
If I prefer to use sendmail - can someone suggest something for content
filtering (mainly attachments).
TIA
--
Best regards,
Chris
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any
All,
I have used the 5.2 released version of the iso disk 1 to install the
minimal installation onto a 256M thumb disk.
i know the installation completed and I can mount the disk on another Freebsd
machine and see that all the files seem fine.
If I don't install the boot selector then the
I've got 4-stable and can't get my USB CD-RW to read or write CDs. The
CD-RW is connected to the computer via a USB 2.0 PCI card. I've got a
ATA DVD-ROM that works perfectly fine.
When I boot, dmesg shows the USB CD-RW:
umass0: IOMEGA CDRW64892EXT3-B , rev 2.00/0.02, addr 2
All the
On Sat, 21 Feb 2004 20:24:57 -0600
Eric F Crist [EMAIL PROTECTED] wrote:
Hello all,
I'm really screwed up my server last week, now I'm giving up on the
5.x series as a server for a while, so I've installed 4.9. I took all
my backup files and placed them on a second harddrive in the system,
Have you tried switching to 1024x768 mode using vidcontrol. I tried and did not suceed
on
my last hardware which was a mvp4 chipset with an 8mb blade3d graphics. Right now I
have a
radeon 7500 on a 440bx chipset. I'd assumed it wouldn't work, this time around also
(ref:
the url below), but
Hi all,
for my new -CURRENT box I have to decide wether to use vinum(8) or the on-board
capabilities of my Asus K8V Deluxe motherboard for RAID1 mirroring. Which solution
would you recommend?
Thanks for your advice
Burkard
--
Burkard Meyendriesch
Stevern 2
D-48301 Nottuln
pgp0.pgp
Written 21st january 2004.
I have a dream, of a help/manual/doc system, which is simple to use?
I have a dream, of a help/manual/doc system, which is simple, and yet
comprehensive to use.
When I need help to some question, when using freebsd, I often get very
confused, and cannot find out how
I have been trying to get a working mysql daemon that allows connections
from remote hosts. I can connect via local host just fine, but any time
I try from my XP desktop via command center (or another remote client),
I get this error immediately:
ERROR 2013: Lost connection to MySQL server
ouyang kai wrote:
Uwe wrote:
Is the P4-1.6G machine a multi-processor system, that is, was the kernel
compiled with the SMP option? If so, there is currently no TSC support
on multi-processor systems, for technical reasons I understand. So in
this case 'machdep.tsc.freq' is omitted from
75 matches
Mail list logo
